summaryrefslogtreecommitdiff
path: root/arch/mips/Makefile
AgeCommit message (Collapse)Author
2014-11-24MIPS: IP22/IP32: Add line to arch/mips/Makefile archhelp about vmlinux.32Joshua Kinard
Building a 64bit kernel for the SGI O2 (IP32) and the SGI Indy (IP22) uses the 'vmlinux.32' target, which converts the output 64-bit 'vmlinux' image into a 32-bit wrapped image. This is needed for certain revisions of the IP22 and IP32 ARCS PROMs to boot correctly, but this target is missing from the 'archhelp' info that is emitted by 'make help'. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: Linux MIPS List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7991/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-07MIPS: Fix build with binutils 2.24.51+Manuel Lauss
Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-22MIPS: Add support for building device-tree binariesAndrew Bresticker
Add a 'dtbs' Makefile target that just builds the device-tree binaries enabled by the configuration. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7557/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-22MIPS: Create common infrastructure for building built-in device-treesAndrew Bresticker
In preparation for moving the device-trees to a common location, introduce the config option BUILTIN_DTB, which can be selected by platforms that use a device-tree built into the kernel image, and create a Makefile to build the device-trees in arch/mips/boot/dts/. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7564/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-17MIPS: SmartMIPS: Disable assembler warningsMarkos Chandras
The kernel code overrides the default ISA as passed by the compiler in quite a few places. This has unfortunate side effects when smartmips is enabled leading to hundreds of warnings during build such as: {standard input}: Assembler messages: {standard input}:411: Warning: the `smartmips' extension requires MIPS32 revision 1 or greater {standard input}: Assembler messages: {standard input}:43: Warning: the 64-bit MIPS architecture does not support the `smartmips' extension [...] Until the kernel code is fixed properly (if possible), disable all the assembler warning messages to make the build logs readable again. This has no runtime side effects but it makes it easier to spot more critical warnings and problems during build. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7356/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: SB1: Check optional compilation flags one by oneMaciej W. Rozycki
This fixes a regression caused by commit bb6c0bd3fdb67c8a1fceea1d4700b9ee593309f9 [MIPS: SB1: Fix excessive kernel warnings.], that makes `-march=r5000' selected for compilation flags rather than supposed `-march=sb1' with compilers that do not support the ASE selection flags introduced with that change. For example GCC 4.1.2 supports `-mips3d'/`-mno-mips3d' (and obviously `-march=sb1'), however it does not support `-mdmx'/`-mno-mdmx'. As a result the whole selection of flags fails and compilation resorts to using `-march=r5000', meant for really old compilers indeed only. It is always best to pick the flags individually unless we are absolutely sure a set of flags was introduced to the toolchain together (`-march=sb1' and `-mtune=sb1' would be a good example), and this change makes it happen for CONFIG_CPU_SB1. Consequently the flags ultimately selected with GCC 4.1.2 are `-march=sb1 -Wa,--trap -mno-mips3d' Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Richard Sandiford <rdsandiford@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7223/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-04Merge branch '3.15-fixes' into mips-for-linux-nextRalf Baechle
2014-06-03MIPS: Fix MSA toolchain support detection.Steven J. Hill
The '-mmsa' option is not supported by all current compilers. Change the detection to instead pass the option directly to the assembler. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Paul Burton <Paul.Burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/6835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-28MIPS: SB1: Fix excessive kernel warnings.Ralf Baechle
A kernel build with binutils 2.24 is going to emit warnings like CC kernel/sys.o {standard input}: Assembler messages: {standard input}:701: Warning: the 32-bit MIPS architecture does not support the `mdmx' extension {standard input}:701: Warning: the `mdmx' extension requires 64-bit FPRs {standard input}:701: Warning: the `mips3d' extension requires MIPS32 revision 2 or greater {standard input}:701: Warning: the `mips3d' extension requires 64-bit FPRs for almost every file. This is caused by changes to gas' interpretation of .set semantics. Fixed by explicitly disabling MIPS3D and MDMX for Sibyte builds. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-23MIPS: math-emu: Move various objects into an ar library.Ralf Baechle
ieee754d.o contains only debug code and dp_sqrt.o and sp_sqrt.o contain code which for MIPS I/II/III systems we don't want to link. Again the savings can be considerable for some systems: $ mips-linux-size --totals ieee754d.o dp_sqrt.o sp_sqrt.o text data bss dec hex filename 1624 0 0 1624 658 ieee754d.o 2016 0 0 2016 7e0 dp_sqrt.o 736 0 0 736 2e0 sp_sqrt.o 4376 0 0 4376 1118 (TOTALS) Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Add MSA register definitions & accessPaul Burton
This patch introduces definitions for the MSA control registers and functions which allow access to both the control & vector registers. If the toolchain being used to build the kernel includes support for MSA then this patch will make use of that support & use MSA instructions directly. However toolchain support for MSA is very new & far from a point where it can be reasonably expected that everyone building the kernel uses a toolchain with support. Thus fallbacks using .word assembler directives are also provided for now as a temporary measure. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6429/ Patchwork: https://patchwork.linux-mips.org/patch/6607/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-23MIPS: microMIPS: Remove unsupported compiler flag.Steven J. Hill
Remove usage of -mno-jals compiler flag when building a pure microMIPS kernel. The -mno-jals flag only ever existed within Mentor toolchains. Dropping this flag allows all FSF toolchains to work. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6200/
2013-12-20stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architecturesKees Cook
Instead of duplicating the CC_STACKPROTECTOR Kconfig and Makefile logic in each architecture, switch to using HAVE_CC_STACKPROTECTOR and keep everything in one place. This retains the x86-specific bug verification scripts. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29MIPS: Kbuild: Do not allow building vmlinuz when !ZBOOTFlorian Fainelli
When CONFIG_SYS_SUPPORTS_ZBOOT is not enabled, we will still try to build the decompressor code in arch/mips/boot/compressed as a dependency for producing the vmlinuz target and this will result in the following build failure: OBJCOPY arch/mips/boot/compressed/vmlinux.bin arch/mips/boot/compressed/decompress.c: In function 'decompress_kernel': arch/mips/boot/compressed/decompress.c:105:2: error: implicit declaration of function 'decompress' make[1]: *** [arch/mips/boot/compressed/decompress.o] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [vmlinuz] Error 2 This is a genuine build failure because we have no implementation for the decompress() function body since no kernel compression method defined in CONFIG_KERNEL_(GZIP,BZIP2...) has been enabled. arch/mips/Makefile already guards the install target for the "vmlinuz" binary with a proper ifdef CONFIG_SYS_SUPPORTS_ZBOOT, we now also do the same if we attempt to do a "make vmlinuz" and show that CONFIG_SYS_SUPPORTS_ZBOOT is not enabled. [ralf@linux-mips.org: Cleanup the makefile rule as suggested by James Hogan.] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: richard@nod.at Patchwork: https://patchwork.linux-mips.org/patch/5817/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Quiet the building output of vmlinux.32 and vmlinux.64Wu Zhangjin
Based on quiet_cmd_X and cmd_X, this patch quiets the building output of vmlinux.32 and vmlinux.64. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sam Ravnborg <sam@ravnborg.org> Patchwork: https://patchwork.linux-mips.org/patch/1766/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18MIPS: Remove useless comment about kprobe from arch/mips/MakefileWu Zhangjin
The commit c1bf207d6ee1eb72e9c10365edbdc7c9ff7fb9b0 (kernel.org) rsp. 58e9ad32a48dce37ffeea912f55bd1c94b85ad7f (lmo) [MIPS: kprobe: Add support] introduced a useless comment. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/1765/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Add uImage build targetJames Hogan
Add a uImage build target for MIPS, which builds uImage.gz (a U-Boot image of vmlinux.bin.gz), and then symlinks it to uImage. This allows for the use of other compression algorithms in future, and is how a few other architectures do it. It's enabled conditionally on load-y >= 0xffffffff80000000 which hopefully allows 64bit kernels to also work as long as the load and entry address can be represented by the 32bit addresses in the U-Boot image format. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5795/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Refactor load/entry address calculationsJames Hogan
The vmlinux load address and entry address is calculated in multiple places: - arch/mips/Makefile defines load-y from CONFIG_PHYSICAL_START (or defined by the platform) and passes it to arch/mips/boot/compressed/Makefile. - arch/mips/boot/compressed/Makefile calculates kernel entry using nm. - arch/mips/lasat/image/Makefile calculates both load and entry address using nm. Lets combine these in the main Makefile and then pass them as Make parameters to each of the three boot image Makefiles (in boot/, boot/compressed, lasat/image/). The boot/ Makefile doesn't currently use them, but will soon need to for U-Boot image targets. The existing load-y definition is used in preference to calculating the load address using nm. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5794/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Refactor boot and boot/compressed rulesJames Hogan
Split out the arch/mips/boot/ and arch/mips/boot/compressed/ targets into boot-y and bootz-y variables. This makes it slightly cleaner to add new targets. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5793/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-01MIPS: initial stack protector supportGregory Fong
Implements basic stack protector support based on ARM version in c743f38013aeff58ef6252601e397b5ba281c633 , with Kconfig option, constant canary value set at boot time, and script to check if compiler actually supports stack protector. Tested by creating a kernel module that writes past end of char[]. Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Cc: linux-mips@linux-mips.org Cc: Filippo Arcidiacono <filippo.arcidiacono@st.com> Cc: Carmelo Amoroso <carmelo.amoroso@st.com> Patchwork: https://patchwork.linux-mips.org/patch/5448/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-09MIPS: microMIPS: Add configuration option for microMIPS kernel.Steven J. Hill
This adds the option to build the Linux kernel using only the microMIPS ISA. The resulting kernel binary is, at a minimum, 20% smaller than using the MIPS32R2 ISA. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-13MIPS: PMC-Sierra Yosemite: Remove support.Ralf Baechle
Nobody seems to be interested anymore and upstream also never had an ethernet driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-13MIPS: Kconfig: Rename several firmware related config symbols.Ralf Baechle
With the upcoming merge of the ARC architecture there is a small likelyhood of conflicting use for the CONFIG_ARC config symbol. Rename it to CONFIG_FW_ARC. Also rename CONFIG_ARC32 to CONFIG_FW_ARC32, CONFIG_ARC64 to CONFIG_FW_ARC64. For consistence also rename CONFIG_SNIPROM to CONFIG_FW_SNIPROM and CONFIG_CFE to CONFIG_FW_CFE. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-13MIPS: Octeon: Add kexec and kdump supportRalf Baechle
[ralf@linux-mips.org: Original patch by Maxim Uvarov <muvarov@gmail.com> with plenty of further shining, polishing, debugging and testing by me.] Signed-off-by: Maxim Uvarov <muvarov@gmail.com> Cc: linux-mips@linux-mips.org Cc: kexec@lists.infradead.org Cc: horms@verge.net.au Patchwork: https://patchwork.linux-mips.org/patch/1026/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-03kbuild: Fix gcc -x syntaxJean Delvare
The correct syntax for gcc -x is "gcc -x assembler", not "gcc -xassembler". Even though the latter happens to work, the former is what is documented in the manual page and thus what gcc wrappers such as icecream do expect. This isn't a cosmetic change. The missing space prevents icecream from recognizing compilation tasks it can't handle, leading to silent kernel miscompilations. Besides me, credits go to Michael Matz and Dirk Mueller for investigating the miscompilation issue and tracking it down to this incorrect -x parameter syntax. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Cc: Bernhard Walle <bernhard@bwalle.de> Cc: Michal Marek <mmarek@suse.cz> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-28Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek. Fixed up nontrivial merge conflict in Makefile as per Stephen Rothwell and linux-next (and trivial arch/sparc/Makefile changes due to removed sparc32 logic). * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: mips: Fix KBUILD_CPPFLAGS definition kbuild: fix ia64 link kbuild: document KBUILD_LDS, KBUILD_VMLINUX_{INIT,MAIN} and LDFLAGS_vmlinux kbuild: link of vmlinux moved to a script kbuild: refactor final link of sparc32 kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile kbuild: Makefile: remove unnecessary check for m68knommu ARCH
2012-05-16mips: Fix KBUILD_CPPFLAGS definitionMichal Marek
The KBUILD_CPPFLAGS variable is no longer passed to sh -c 'gcc ...', but exported and used by the link-vmlinux.sh script. This means that the double-quotes will not be evaluated by the shell. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05mips: Use generic init_taskThomas Gleixner
Same code. Use the generic version. The special Makefile treatment is pointless anyway as init_task.o contains only data which is handled by the linker script. So no point on being treated like head text. Make the linker script align the task on THREAD_SIZE and not on PAGE_SIZE, as PAGE_SIZE might be smaller than THREAD_SIZE. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/20120503085034.941344764@linutronix.de
2011-12-07MIPS: BMIPS: Add CFLAGS, Makefile entries for BMIPSKevin Cernekee
Add CONFIG_CPU_BMIPS* in all of the right places, so that BMIPS kernel images will compile and run. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2955/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-09kbuild: Fix missing system calls check on mips.David Daney
Commit 5f7efb4 (Kbuild: append missing-syscalls to the default target list) broke MIPS build. Reported-tested-and-acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-10-20MIPS: Fix build with C=1Aaro Koskinen
When trying to compile the 3.1-rc10 kernel for my MIPS board with C=1 (sparse checking), the build fails early with the error: CHK include/linux/version.h UPD include/linux/version.h CHK include/generated/utsrelease.h UPD include/generated/utsrelease.h Checking missing-syscalls for N32 CALL scripts/checksyscalls.sh Checking missing-syscalls for O32 CALL scripts/checksyscalls.sh CC kernel/bounds.s GEN include/generated/bounds.h CC arch/mips/kernel/asm-offsets.s GEN include/generated/asm-offsets.h CALL scripts/checksyscalls.sh HOSTCC scripts/genksyms/genksyms.o SHIPPED scripts/genksyms/lex.lex.c SHIPPED scripts/genksyms/keywords.hash.c SHIPPED scripts/genksyms/parse.tab.h HOSTCC scripts/genksyms/lex.lex.o SHIPPED scripts/genksyms/parse.tab.c HOSTCC scripts/genksyms/parse.tab.o HOSTLD scripts/genksyms/genksyms /bin/sh: Syntax error: "(" unexpected make[3]: *** [scripts/mod/empty.o] Error 2 make[2]: *** [scripts/mod] Error 2 make[1]: *** [scripts] Error 2 It seems the shell chokes because sparse is called with command line arguments such as: -D__INT8_C(c)='c' Converting these to form: -D'__INT8_C(c)'='c' seems to fix the problem. [ralf@linux-mips.org: This affects builds with gcc 4.5 and newer.] Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2827/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20MIPS: Don't install vmlinuz if compressed kernel has not been configured.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-20MIPS: XLR, XLS: Move makefile bits to were they belong.Ralf Baechle
This patch combines linux-mips.org patches 637d69600fb1773da56487271ec2a79c33d237ed [MIPS: Netlogic: Yank out crap.] and 5e3c263b9658a4b1c6c5577793e9347efb44854e [MIPS: XLR, XLS: Add Kbuild files for platform.] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2415/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Kconfig and Makefile update for Netlogic XLR/XLSJayachandran C
Add NLM_XLR_BOARD, CPU_XLR and other config options Makefile updates, mostly based on r4k Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-17mips: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-29MIPS: Octeon: Apply CN63XXP1 errata workarounds.David Daney
The CN63XXP1 needs a couple of workarounds to ensure memory is not written in unexpected ways. All PREF with hints in the range 0-4,6-24 are replaced with PREF 28. We pass a flag to the assembler to cover compiler generated code, and patch uasm for the dynamically generated code. The write buffer threshold is reduced to 4. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1672/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29MIPS: Get rid of branches to .subsections.Ralf Baechle
It was a nice optimization - on paper at least. In practice it results in branches that may exceed the maximum legal range for a branch. We can fight that problem with -ffunction-sections but -ffunction-sections again is incompatible with -pg used by the function tracer. By rewriting the loop around all simple LL/SC blocks to C we reduce the amount of inline assembler and at the same time allow GCC to often fill the branch delay slots with something sensible or whatever else clever optimization it may have up in its sleeve. With this optimization gone we also no longer need -ffunction-sections, so drop it. This optimization was originally introduced in 2.6.21, commit 5999eca25c1fd4b9b9aca7833b04d10fe4bc877d (linux-mips.org) rsp. f65e4fa8e0c6022ad58dc88d1b11b12589ed7f9f (kernel.org). Original fix for the issues which caused me to pull this optimization by Paul Gortmaker <paul.gortmaker@windriver.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: modpost: support objects with more than 64k sections trivial: fix a typo in a filename frv: clean up arch/frv/Makefile kbuild: allow assignment to {A,C}FLAGS_KERNEL on the command line kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command line Kbuild: Add option to set -femit-struct-debug-baseonly Makefile: "make kernelrelease" should show the correct full kernel version Makefile.build: make KBUILD_SYMTYPES work again
2010-08-05MIPS: kprobe: Add support.David Daney
This patch is based on previous work by Sony and Himanshu Chauhan. I have done some cleanup and implemented JProbes and KRETPROBES. The KRETPROBES part is pretty much copied verbatim from powerpc. A possible future enhance might be to factor out the common code. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Himanshu Chauhan <hschauhan@nulltrace.org> To: linux-mips@linux-mips.org To: ananth@in.ibm.com, To: anil.s.keshavamurthy@intel.com To: davem@davemloft.net To: masami.hiramatsu.pt@hitachi.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1525/ Patchwork: https://patchwork.linux-mips.org/patch/1530/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Clean up arch/mips/MakefileSam Ravnborg
- Drop CLEAN_FILES assignments that is no longer required - Add $(Q) in a few rules Signed-off-by: Sam Ravnborg <sam@ravnborg.org> To: linux-mips <linux-mips@linux-mips.org> To: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1305/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Refactor arch/mips/boot/compressed/MakefileSam Ravnborg
- use hostprogs-y for the elf2ecoff - list all *.o file in targets - renamed obj-y to vmlinuzobjs-y (it was confusing to re-use a kbuild variable) - fix all uses of if_changed/cmd - use kbuild rules to beautify output - update clean-file to clean vmlinuz.* in top-level directory - simplied logic in arch/mips/Makefile for compressed targets The net result is a more kbuild conformant Makefile but readability did not increase. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> To: linux-mips <linux-mips@linux-mips.org> To: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1304/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Refactor arch/mips/boot/MakefileSam Ravnborg
- remove stuff that is not needed VMLINUX assignment, all: rule - use hostprogs-y for the host program - use kbuild rules for the three targets - to beautify output - drop clean-files - it is no longer needed - simplify arch/mips/Makefile when calling targets in boot/Makefile Signed-off-by: Sam Ravnborg <sam@ravnborg.org> To: linux-mips <linux-mips@linux-mips.org> To: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1303/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: PNX8550: Migrate to new platform makefile style.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: PNX833x: Migrate to new platform makefile style.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: STB8550: Move boards over to obj-yRalf Baechle
Preparatory cleanup for moving Alchemy over to new MIPS Platform build system support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: STB22x: Move boards over to obj-yRalf Baechle
Preparatory cleanup for moving Alchemy over to new MIPS Platform build system support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: PNX8550: Move code one directory level up.Ralf Baechle
It was sharing the nxp directory but no code with pnx833x and will fit better into the new platform makefile scheme, if moved. Also after the pnx833x code has been moved up, the pnx8550 Code was the last users of the nxp dir. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>