summaryrefslogtreecommitdiff
path: root/arch/mips/Makefile
AgeCommit message (Collapse)Author
2019-07-23MIPS: Remove unused R8000 CPU supportPaul Burton
Our R8000 CPU support can only be included if a system selects CONFIG_SYS_HAS_CPU_R8000. No system does, making all R8000-related CPU support dead code. Remove it. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-07-23MIPS: Remove unused R5432 CPU supportPaul Burton
Our R5432 CPU support can only be included if a system selects CONFIG_SYS_HAS_CPU_R5432. No system does, making all R5432-related CPU support dead code. Remove it. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-07-23MIPS: Remove unused R4300 CPU supportPaul Burton
Our R4300 CPU support can only be included if a system selects CONFIG_SYS_HAS_CPU_R4300. No system does, making all R4300-related CPU support dead code. Remove it. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-06-20MIPS: have "plain" make calls build dtbs for selected platformsCedric Hombourger
scripts/package/builddeb calls "make dtbs_install" after executing a plain make (i.e. no build targets specified). It will fail if dtbs were not built beforehand. Match the arm64 architecture where DTBs get built by the "all" target. Signed-off-by: Cedric Hombourger <Cedric_Hombourger@mentor.com> [paul.burton@mips.com: s/builddep/builddeb] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.1+
2019-02-04MIPS: Add GINVT instruction helpersPaul Burton
Add a family of ginvt_* functions making it easy to emit a GINVT instruction to globally invalidate TLB entries. We make use of the _ASM_MACRO infrastructure to support emitting the instructions even if the assembler isn't new enough to support them natively. An associated STYPE_GINV definition & sync_ginv() function are added to emit a sync instruction of type 0x14, which operates as a completion barrier for these new GINVT (and GINVI) instructions. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2018-12-14mips: generate uapi header and system call table filesFiroz Khan
System call table generation script must be run to gener- ate unistd_(nr_)n64/n32/o32.h and syscall_table_32_o32/ 64_n64/64_n32/64-o32.h files. This patch will have changes which will invokes the script. This patch will generate unistd_(nr_)n64/n32/o32.h and syscall_table_32_o32/64_n64/64-n32/64-o32.h files by the syscall table generation script invoked by parisc/Make- file and the generated files against the removed files must be identical. The generated uapi header file will be included in uapi/- asm/unistd.h and generated system call table header file will be included by kernel/scall32-o32/64-n64/64-n32/- 64-o32.Sfile. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: y2038@lists.linaro.org Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: arnd@arndb.de Cc: deepa.kernel@gmail.com Cc: marcin.juszkiewicz@linaro.org
2018-11-09MIPS: Don't compile math-emu when CONFIG_MIPS_FP_SUPPORT=nPaul Burton
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so there's no point compiling in our FPU emulator. Avoid doing so, providing stub versions of dsemul cleanup functions that are called from signal & task handling code. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21012/ Cc: linux-mips@linux-mips.org
2018-11-02kbuild: replace cc-name test with CONFIG_CC_IS_CLANGMasahiro Yamada
Evaluating cc-name invokes the compiler every time even when you are not compiling anything, like 'make help'. This is not efficient. The compiler type has been already detected in the Kconfig stage. Use CONFIG_CC_IS_CLANG, instead. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Paul Burton <paul.burton@mips.com> (MIPS) Acked-by: Joel Stanley <joel@jms.id.au>
2018-10-26Merge tag 'mips_4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Paul Burton: - kexec support for the generic MIPS platform when running on a CPU including the MIPS Coherence Manager & related hardware. - Improvements to the definition of memory barriers used around MMIO accesses, and fixes in their use. - Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping reliance on the old bootmem code. - A number of fixes & improvements for Loongson 3 systems. - DT & config updates for the Microsemi Ocelot platform. - Workaround to enable USB power on the Netgear WNDR3400v3. - Various cleanups & fixes. * tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (51 commits) MIPS: Cleanup DSP ASE detection MIPS: dts: Change upper case to lower case MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig MIPS: Loongson-3: Fix BRIDGE irq delivery problem MIPS: Loongson-3: Fix CPU UART irq delivery problem MIPS: Remove unused PREF, PREFE & PREFX macros MIPS: lib: Use kernel_pref & user_pref in memcpy() MIPS: Remove unused CAT macro MIPS: Add kernel_pref & user_pref helpers MIPS: Remove unused TTABLE macro MIPS: Remove unused PIC macros MIPS: Remove unused MOVN & MOVZ macros MIPS: Provide actually relaxed MMIO accessors MIPS: Enforce strong ordering for MMIO accessors MIPS: Correct `mmiowb' barrier for `wbflush' platforms MIPS: Define MMIO ordering barriers MIPS: mscc: add PCB120 to the ocelot fitImage MIPS: mscc: add DT for Ocelot PCB120 MIPS: memset: Limit excessive `noreorder' assembly mode use MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression ...
2018-10-16MIPS: Cleanup DSP ASE detectionPaul Burton
Currently we hardcode a list of files for which we specify that the toolchain has DSP ASE support when building for MIPSr2 only. This has a number of problems: 1) It doesn't actually ensure that the toolchain supports the DSP ASE at all. 2) It's fragile if we try to use DSP ASE macros in other files. 3) It makes no provision for MIPSr6 & later systems which also support the DSP ASE & end up using the .word directive implementation of the DSP macros. Fix this by detecting assembler support for the DSP ASE globally, not just for a small set of files, and not just for MIPSr2. This now exposes use of toolchain DSP support to kernel builds targeting MIPSr1 and older, so we add .set MIPS_ISA_LEVEL directives prior to all .set dsp directives in order to prevent the assembler from complaining that the DSP ASE is only supported with MIPSr2 & higher. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20901/ Cc: linux-mips@linux-mips.org
2018-10-02kbuild: consolidate Devicetree dtb build rulesRob Herring
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Paul Burton <paul.burton@mips.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-30MIPS: Use a custom elf-entry program to find kernel entry pointPaul Burton
For a long time arch/mips/Makefile used nm to discover the kernel entry point by looking for the address of the kernel_entry symbol. This doesn't work for systems which make use of bit 0 of the PC to reflect the ISA mode - ie. microMIPS (and MIPS16, but we don't support building kernels that target MIPS16 anyway). So for a while with commit 5fc9484f5e41 ("MIPS: Set ISA bit in entry-y for microMIPS kernels") we manually modified the last nibble of the output from nm, which worked but wasn't particularly pretty. Commit 27c524d17430 ("MIPS: Use the entry point from the ELF file header") then cleaned this up by using objdump to print the ELF entry point which includes the ISA bit, rather than using nm to print the address of the kernel_entry symbol which doesn't. That removed the ugly replacement of the last nibble, but added its own ugliness by needing to manually sign extend in the 32 bit case. Unfortunately it has been pointed out that objdump's output is localised, and therefore grepping for its "start address" output doesn't work when the user's language settings are such that objdump doesn't print in English. We could simply revert commit 27c524d17430 ("MIPS: Use the entry point from the ELF file header") and return to the manual replacement of the last nibble of entry-y, but it seems that was found sufficiently unpalatable to avoid. We could attempt to force the language used by objdump by setting an environment variable such as LC_ALL, but that seems fragile. Instead we add a small tool named elf-entry which simply prints out the entry point of the kernel in the format we require. Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Philippe Reynes <philippe.reynes@softathome.com> Tested-by: Philippe Reynes <philippe.reynes@softathome.com> Fixes: 27c524d17430 ("MIPS: Use the entry point from the ELF file header") Patchwork: https://patchwork.linux-mips.org/patch/20322/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org
2018-08-24kbuild: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-07MIPS: Always specify -EB or -EL when using clangPaul Burton
When building using clang, always specify -EB or -EL in order to ensure we target the desired endianness. Since clang cross compiles using a single compiler build with multiple targets, our -dumpmachine tests which don't specify clang's --target argument check output based upon the build machine rather than the machine our build will target. This means our detection of whether to specify -EB fails miserably & we never do. Providing the endianness flag unconditionally for clang resolves this issue & simplifies the clang path somewhat. Signed-off-by: Paul Burton <paul.burton@mips.com>
2018-06-28MIPS: Always use -march=<arch>, not -<arch> shortcutsPaul Burton
The VDSO Makefile filters CFLAGS to select a subset which it uses whilst building the VDSO ELF. One of the flags it allows through is the -march= flag that selects the architecture/ISA to target. Unfortunately in cases where CONFIG_CPU_MIPS32_R{1,2}=y and the toolchain defaults to building for MIPS64, the main MIPS Makefile ends up using the short-form -<arch> flags in cflags-y. This is because the calls to cc-option always fail to use the long-form -march=<arch> flag due to the lack of an -mabi=<abi> flag in KBUILD_CFLAGS at the point where the cc-option function is executed. The resulting GCC invocation is something like: $ mips64-linux-gcc -Werror -march=mips32r2 -c -x c /dev/null -o tmp cc1: error: '-march=mips32r2' is not compatible with the selected ABI These short-form -<arch> flags are dropped by the VDSO Makefile's filtering, and so we attempt to build the VDSO without specifying any architecture. This results in an attempt to build the VDSO using whatever the compiler's default architecture is, regardless of whether that is suitable for the kernel configuration. One encountered build failure resulting from this mismatch is a rejection of the sync instruction if the kernel is configured for a MIPS32 or MIPS64 r1 or r2 target but the toolchain defaults to an older architecture revision such as MIPS1 which did not include the sync instruction: CC arch/mips/vdso/gettimeofday.o /tmp/ccGQKoOj.s: Assembler messages: /tmp/ccGQKoOj.s:273: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:329: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:520: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:714: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1009: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1066: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1114: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1279: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1334: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1374: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1459: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1514: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1814: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:2002: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:2066: Error: opcode not supported on this processor: mips1 (mips1) `sync' make[2]: *** [scripts/Makefile.build:318: arch/mips/vdso/gettimeofday.o] Error 1 make[1]: *** [scripts/Makefile.build:558: arch/mips/vdso] Error 2 make[1]: *** Waiting for unfinished jobs.... This can be reproduced for example by attempting to build pistachio_defconfig using Arnd's GCC 8.1.0 mips64 toolchain from kernel.org: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-mips64-linux.tar.xz Resolve this problem by using the long-form -march=<arch> in all cases, which makes it through the arch/mips/vdso/Makefile's filtering & is thus consistently used to build both the kernel proper & the VDSO. The use of cc-option to prefer the long-form & fall back to the short-form flags makes no sense since the short-form is just an abbreviation for the also-supported long-form in all GCC versions that we support building with. This means there is no case in which we have to use the short-form -<arch> flags, so we can simply remove them. The manual redefinition of _MIPS_ISA is removed naturally along with the use of the short-form flags that it accompanied, and whilst here we remove the separate assembler ISA selection. I suspect that both of these were only required due to the mips32 vs mips2 mismatch that was introduced by commit 59b3e8e9aac6 ("[MIPS] Makefile crapectomy.") and fixed but not cleaned up by commit 9200c0b2a07c ("[MIPS] Fix Makefile bugs for MIPS32/MIPS64 R1 and R2."). I've marked this for backport as far as v4.4 where the MIPS VDSO was introduced. In earlier kernels there should be no ill effect to using the short-form flags. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: James Hogan <jhogan@kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/19579/
2018-06-01kbuild: add machine size to CHECKFLAGSLuc Van Oostenryck
By default, sparse assumes a 64bit machine when compiled on x86-64 and 32bit when compiled on anything else. This can of course create all sort of problems for the other archs, like issuing false warnings ('shift too big (32) for type unsigned long'), or worse, failing to emit legitimate warnings. Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT, to CHECKFLAGS in the main Makefile (and so for all archs). Also, remove the now unneeded -m32/-m64 in arch specific Makefiles. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-22MIPS: Use the entry point from the ELF file headerMaciej W. Rozycki
In order to fetch the correct entry point with the ISA bit included, for use by non-ELF boot loaders, parse the output of `objdump -f' for the start address recorded in the kernel executable itself, rather than using `nm' to get the value of the `kernel_entry' symbol. Sign-extend the address retrieved if 32-bit, so that execution is correctly started on 64-bit processors as well. The tool always prints the entry point using either 8 or 16 hexadecimal digits, matching the address width (aka class) of the ELF file, even in the presence of leading zeros. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18912/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-21MIPS: generic: Add support for Microsemi OcelotAlexandre Belloni
Introduce support for the MIPS based Microsemi Ocelot SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18858/ [jhogan@kernel.org: update ocelot_defconfig specification] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-05MIPS: Expand help text to list generic defconfigsJames Hogan
Expand the MIPS Makefile help text to list generic board names, generic defconfigs, and legacy defconfigs which have been converted to generic and are still usable. Here's a snippet of the new "make ARCH=mips help" output: ... If you are targeting a system supported by generic kernels you may configure the kernel for a given architecture target like so: {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards"> Where BOARDS is some subset of the following: boston ni169445 ranchu sead-3 xilfpga Specifically the following generic default configurations are supported: 32r1_defconfig - Build generic kernel for MIPS32 r1 32r1el_defconfig - Build generic kernel for MIPS32 r1 little endian 32r2_defconfig - Build generic kernel for MIPS32 r2 32r2el_defconfig - Build generic kernel for MIPS32 r2 little endian 32r6_defconfig - Build generic kernel for MIPS32 r6 32r6el_defconfig - Build generic kernel for MIPS32 r6 little endian 64r1_defconfig - Build generic kernel for MIPS64 r1 64r1el_defconfig - Build generic kernel for MIPS64 r1 little endian 64r2_defconfig - Build generic kernel for MIPS64 r2 64r2el_defconfig - Build generic kernel for MIPS64 r2 little endian 64r6_defconfig - Build generic kernel for MIPS64 r6 64r6el_defconfig - Build generic kernel for MIPS64 r6 little endian micro32r2_defconfig - Build generic kernel for microMIPS32 r2 micro32r2el_defconfig - Build generic kernel for microMIPS32 r2 little endian The following legacy default configurations have been converted to generic and can still be used: sead3_defconfig - Build 32r2el_defconfig BOARDS=sead-3 sead3micro_defconfig - Build micro32r2el_defconfig BOARDS=sead-3 xilfpga_defconfig - Build 32r2el_defconfig BOARDS=xilfpga ... Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18598/
2018-02-19MIPS: Refactor legacy defconfigsJames Hogan
Define legacy defconfigs which have been converted to the generic platform more programatically, so that they can be listed in the Makefile help text and as a separate Makefile target without duplication. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18596/
2018-02-19MIPS: crypto: Add crc32 and crc32c hw accelerated moduleMarcin Nowakowski
This module registers crc32 and crc32c algorithms that use the optional CRC32[bhwd] and CRC32C[bhwd] instructions in MIPSr6 cores. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com> Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: linux-crypto@vger.kernel.org Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Patchwork: https://patchwork.linux-mips.org/patch/18601/ [jhogan@kernel.org: Add CRYPTO_ALG_OPTIONAL_KEY flag on Eric Biggers' suggestion, due to commit a208fa8f3303 ("crypto: hash - annotate algorithms taking optional key") in v4.16-rc1]
2018-01-22MIPS: XPA: Use XPA instructions in assemblyJames Hogan
Utilise XPA instructions MFHC0 & MTHC0 in inline assembly instead of directly encoding them with the _ASM_INSN* macros, and transparently implement these instructions as assembler macros if the toolchain doesn't support them natively, using the recently introduced assembler macro helpers. The old direct encodings were restricted to using the register $at, so this allows the extra register moves to go away (saving a grand total of 24 bytes). Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17775/
2018-01-18MIPS: Fix vmlinuz build when ZBOOT is selectedDaniel Sabogal
vmlinuz is not built by default for platforms using COMPRESSION_FNAME (e.g. Malta) due to an erroneous check on ZBOOT Signed-off-by: Daniel Sabogal <dsabogalcc@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18466/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-08MIPS: Xilfpga: Switch to using generic defconfigsZubair Lutfullah Kakakhel
Use the generic platform code and remove arch/mips/xilfpga Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15847/ [jhogan@kernel.org: Update arch/mips/Makefile snippet and move to end] Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-08MIPS: Set defconfig target to a generic system for 32r2elMatt Redfearn
The default system type should be a MIPS generic kernel. In order to include some level of board support, select a 32r2el generic defconfig by default. The alternative would be to use "generic_defconfig" but rather unintuitvely that is a bare bones configuration with no platform support so is not usable in practice. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14715/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-09-06MIPS: Add DWARF unwinding to assemblyCorey Minyard
This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-30MIPS: Prevent direct use of generic_defconfigPaul Burton
Using generic_defconfig directly is unlikely to be what a user actually wants to do - it doesn't specify any particular ISA revision & it doesn't enable any board or driver support, resulting in a largely useless kernel. Prevent users from using it directly, printing a helpful message to point them in the right direction if they attempt to. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16946/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-30MIPS: generic: Allow filtering enabled boards by requirementsPaul Burton
Up until now when configuring a generic kernel all board config fragments have been merged by default unless boards are explicitly selected by the user specifying BOARDS=. In many cases this is sub-optimal, since some boards don't make sense to include in some kernels. For example the MIPS SEAD-3 development board has only ever been used with 32 bit CPUs, so including support for the SEAD-3 in a 64 bit kernel is wasteful. This patch introduces support for specifying requirements in board config fragments, using comments formatted like so: # require CONFIG_BLA=y For example the SEAD-3 board could specify that it should only be merged for 32 bit kernels using a requirement line like the following: # require CONFIG_32BIT=y A new generic-board-config.sh script is introduced to handle selecting the board config fragments to merge & calling merge_config.sh to merge them. In order to allow requirements to check Kconfig symbols that are implicitly selected, rather than explicitly specified by generic_defconfig or one of the ISA config fragments, an intermediate .config file is saved & used as a reference when checking requirements. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16943/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: Allow platform to specify multiple its.S filesPaul Burton
In preparation for splitting arch/mips/generic/vmlinux.its.S into multiple files such that it doesn't become a conflict magnet as boards are added, allow platforms to specify a list of image tree source files which will be concatenated to form the final source used to build the image tree. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: Remove unused R6000 supportPaul Burton
The kernel contains a small amount of incomplete code aimed at supporting old R6000 CPUs. This is: - Unused, as no machine selects CONFIG_SYS_HAS_CPU_R6000. - Broken, since there are glaring errors such as r6000_fpu.S moving the FCSR register to t1, then ignoring it & instead saving t0 into struct sigcontext... - A maintenance headache, since it's code that nobody can test which nevertheless imposes constraints on code which it shares with other machines. Remove this incomplete & broken R6000 CPU support in order to clean up and in preparation for changes which will no longer need to consider dragging the pretense of R6000 support along with them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16236/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-08MIPS: Set ISA bit in entry-y for microMIPS kernelsPaul Burton
When building a kernel for the microMIPS ISA, ensure that the ISA bit (ie. bit 0) in the entry address is set. Otherwise we may include an entry address in images which bootloaders will jump to as MIPS32 code. I originally tried using "objdump -f" to obtain the entry address, which works for microMIPS but it always outputs a 32 bit address for a 32 bit ELF whilst nm will sign extend to 64 bit. That matters for systems where we might want to run a MIPS32 kernel on a MIPS64 CPU & load it with a MIPS64 bootloader, which would then jump to a non-canonical (non-sign-extended) address. This works in all cases as it only changes the behaviour for microMIPS kernels, but isn't the prettiest solution. A possible alternative would be to write a custom tool to just extract, sign extend & print the entry point of an ELF executable. I'm open to feedback if that would be preferred. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16950/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-29MIPS: build: Fix "-modd-spreg" switch usage when compiling for mips32r6Miodrag Dinic
Add "-modd-spreg" when compiling the kernel for mips32r6 target. This makes sure the kernel builds properly even with toolchains that use "-mno-odd-spreg" by default. This is the case with Android gcc. Prior to this patch, kernel builds using gcc for Android failed with following error messages, if target architecture is set to mips32r6: arch/mips/kernel/r4k_switch.S: Assembler messages: .../r4k_switch.S:210: Error: float register should be even, was 1 .../r4k_switch.S:212: Error: float register should be even, was 3 .../r4k_switch.S:214: Error: float register should be even, was 5 .../r4k_switch.S:216: Error: float register should be even, was 7 .../r4k_switch.S:218: Error: float register should be even, was 9 .../r4k_switch.S:220: Error: float register should be even, was 11 .../r4k_switch.S:222: Error: float register should be even, was 13 .../r4k_switch.S:224: Error: float register should be even, was 15 .../r4k_switch.S:226: Error: float register should be even, was 17 .../r4k_switch.S:228: Error: float register should be even, was 19 .../r4k_switch.S:230: Error: float register should be even, was 21 .../r4k_switch.S:232: Error: float register should be even, was 23 .../r4k_switch.S:234: Error: float register should be even, was 25 .../r4k_switch.S:236: Error: float register should be even, was 27 .../r4k_switch.S:238: Error: float register should be even, was 29 .../r4k_switch.S:240: Error: float register should be even, was 31 make[2]: *** [arch/mips/kernel/r4k_switch.o] Error 1 Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Cc: James.Hogan@imgtec.com Cc: Paul.Burton@imgtec.com Cc: Raghu.Gandham@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: Douglas.Leung@imgtec.com Cc: Petar.Jovanovic@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-11MIPS: generic: fix out-of-tree defconfig target buildsMarcin Nowakowski
When specifying a generic defconfig target with O=... option set, make is invoked in the output location before a target makefile wrapper is created. Ensure that the correct makefile is used by specifying the kernel source makefile during make invocation. This fixes the either of the following errors: $ make sead3_defoncifg ARCH=mips O=test make[1]: Entering directory '/mnt/ssd/MIPS/linux-next/test' make[2]: *** No rule to make target '32r2el_defconfig'. Stop. arch/mips/Makefile:506: recipe for target 'sead3_defconfig' failed make[1]: *** [sead3_defconfig] Error 2 make[1]: Leaving directory '/mnt/ssd/MIPS/linux-next/test' Makefile:152: recipe for target 'sub-make' failed make: *** [sub-make] Error 2 $ make 32r2el_defconfig ARCH=mips O=test make[1]: Entering directory '/mnt/ssd/MIPS/linux-next/test' Using ../arch/mips/configs/generic_defconfig as base Merging ../arch/mips/configs/generic/32r2.config Merging ../arch/mips/configs/generic/el.config Merging ../arch/mips/configs/generic/board-sead-3.config ! ! merged configuration written to .config (needs make) ! make[2]: *** No rule to make target 'olddefconfig'. Stop. arch/mips/Makefile:489: recipe for target '32r2el_defconfig' failed make[1]: *** [32r2el_defconfig] Error 2 make[1]: Leaving directory '/mnt/ssd/MIPS/linux-next/test' Makefile:152: recipe for target 'sub-make' failed make: *** [sub-make] Error 2 Fixes: eed0eabd12ef ('MIPS: generic: Introduce generic DT-based board support') Fixes: 3f5f0a4475e1 ('MIPS: generic: Convert SEAD-3 to a generic board') Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15464/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-02-14MIPS: Disable stack checks on MIPS kernelsJoshua Kinard
Disable stack checking on MIPS kernels. Some distribution toolchains might pass the -fstack-check option to gcc. This results in a store-doubleword instruction being emitted at the top of all functions that checks the available stack space. E.g., a80000000001d740 <per_cpu_init>: a80000000001d740: ffa0bfc0 sd zero,-16448(sp) a80000000001d744: 2405ffc9 li a1,-55 a80000000001d748: 67bdffc0 daddiu sp,sp,-64 Generally, this is undesirable, and especially on the SGI IP27 platform, it will trigger a NULL pointer dereference in '_raw_spin_lock_irq' during early init. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Suggested-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15132/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-01-25MIPS: 'make -s' should be silentArnd Bergmann
A clean mips64 build produces no output except for two lines: Checking missing-syscalls for N32 Checking missing-syscalls for O32 On other architectures, there is no output at all, so let's do the same here for the sake of build testing. The 'kecho' macro is used to print the message on a normal build but skip it with 'make -s'. Fixes: e48ce6b8df5b ("[MIPS] Simplify missing-syscalls for N32 and O32") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15040/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Use Makefile.postlink to insert relocations into vmlinuxMatt Redfearn
When relocatable support for MIPS was merged, there was no support for an architecture to add a postlink step for vmlinux. This meant that only invoking a target within the boot directory, such as uImage, caused the relocations to be inserted into vmlinux. Building just the vmlinux target would result in a relocatable kernel with no relocation information present. Commit fbe6e37dab97 ("kbuild: add arch specific post-link Makefile") recified this situation, so MIPS can now define a postlink step to add relocation information into vmlinux, and remove the additional steps tacked onto boot targets. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Steven J. Hill <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14554/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: zboot: Add "uzImage.bin" targetMaarten ter Huurne
uzImage.bin is vmlinuz.bin wrapped in a legacy U-Boot image. Since the extraction code is inside the image, it does not depend on the boot loader to extract the kernel. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14473/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-11-04MIPS: Fix build of compressed imageMatt Redfearn
Changes introduced to arch/mips/Makefile for the generic kernel resulted in build errors when making a compressed image if platform-y has multiple values, like this: make[2]: *** No rule to make target `alchemy/'. make[1]: *** [vmlinuz] Error 2 make[1]: Target `_all' not remade because of errors. make: *** [sub-make] Error 2 make: Target `_all' not remade because of errors. Fix this by quoting $(platform-y) as it is passed to the Makefile in arch/mips/boot/compressed/Makefile Reported-by: kernelci.org bot <bot@kernelci.org> Link: https://storage.kernelci.org/next/next-20161017/mips-gpr_defconfig/build.log Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14405/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: generic: Convert SEAD-3 to a generic boardPaul Burton
Convert the MIPS SEAD-3 board support to be a generic board, supported by generic kernels. Because the SEAD-3 boot protocol was defined long ago and we don't want to force a switch to the UHI protocol, SEAD-3 is added as a legacy board which is detected by reading the REVISION register. This may technically not be a valid memory read & future work will include attempting to handle that gracefully. In practice since SEAD-3 is the only legacy board supported by the generic kernel so far the read will only happen on SEAD-3 boards, and even once Malta is converted the same REVISION register exists there too. Other boards such as Boston, Ci20 & Ci40 will use the UHI boot protocol & thus not run any of the legacy board detect functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: generic: Introduce generic DT-based board supportPaul Burton
Introduce a "generic" platform, which aims to be board-agnostic by making use of device trees passed by the boot protocol defined in the MIPS UHI (Universal Hosting Interface) specification. Provision is made for supporting boards which use a legacy boot protocol that can't be changed, but adding support for such boards or any others is left to followon patches. Right now the built kernels expect to be loaded to 0x80100000, ie. in kseg0. This is fine for the vast majority of MIPS platforms, but nevertheless it would be good to remove this limitation in the future by mapping the kernel via the TLB such that it can be loaded anywhere & map itself appropriately. Configuration is handled by dynamically generating configs using scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc makes use of it. This allows for variations upon the configuration, eg. differing architecture revisions or subsets of driver support for differing boards, to be handled without having a large number of defconfig files. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: Support generating Flattened Image Trees (.itb)Paul Burton
Add support for generating kernel images in the Flattened Image Tree (.itb) format as supported by U-Boot. This format is essentially a Flattened Device Tree binary containing images (kernels, DTBs, ramdisks) and configurations which link those images together. The big advantages of FIT images over the uImage format are: - We can include FDTs in the kernel image in a way that the bootloader can extract it & manipulate it before providing it to the kernel. Thus we can ship FDTs as part of the kernel giving us the advantages of being able to develop & maintain the DT within the kernel tree, but also have the benefits of the bootloader being able to manipulate the FDT. Example uses for this would be to inject the kernel command line into the chosen node, or to fill in the correct memory size. - We can include multiple configurations in a single kernel image. This means that a single FIT image can, given appropriate bootloaders, be booted on different boards with the bootloader selecting an appropriate configuration & providing the correct FDT to the kernel. - We can support a multitude of hashes over the data. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14352/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13MIPS: Remove compact branch policy Kconfig entriesPaul Burton
Commit c1a0e9bc885d ("MIPS: Allow compact branch policy to be changed") added Kconfig entries allowing for the compact branch policy used by the compiler for MIPSr6 kernels to be specified. This can be useful for debugging, particularly in systems where compact branches have recently been introduced. Unfortunately mainline gcc 5.x supports MIPSr6 but not the -mcompact-branches compiler flag, leading to MIPSr6 kernels failing to build with gcc 5.x with errors such as: mipsel-linux-gnu-gcc: error: unrecognized command line option '-mcompact-branches=optimal' make[2]: *** [kernel/bounds.s] Error 1 Fixing this by hiding the Kconfig entry behind another seems to be more hassle than it's worth, as MIPSr6 & compact branches have been around for a while now and if policy does need to be set for debug it can be done easily enough with KCFLAGS. Therefore remove the compact branch policy Kconfig entries & their handling in the Makefile. This reverts commit c1a0e9bc885d ("MIPS: Allow compact branch policy to be changed"). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: c1a0e9bc885d ("MIPS: Allow compact branch policy to be changed") Cc: stable <stable@vger.kernel.org> # v4.4+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14241/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-17MIPS: Fix VZ probe gas errors with binutils <2.24James Hogan
The VZ guest register & TLB access macros introduced in commit "MIPS: Add guest CP0 accessors" use VZ ASE specific instructions that aren't understood by versions of binutils prior to 2.24. Add a check for whether the toolchain supports the -mvirt option, similar to the MSA toolchain check, and implement the accessors using .word if not. Due to difficulty in converting compiler specified registers (e.g. "$3") to usable numbers (e.g. "3") in inline asm, we need to copy to/from a temporary register, namely the assembler temporary (at/$1), and specify guest CP0 registers numerically in the gc0 macros. Fixes: 7eb91118227d ("MIPS: Add guest CP0 accessors") Signed-off-by: James Hogan <james.hogan@imgtec.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-next@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13255/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Generate relocation table when CONFIG_RELOCATABLEMatt Redfearn
When CONFIG_RELOCATABLE is enabled (added in later patch) add --emit-relocs to vmlinux LDFLAGS so that fully linked vmlinux contains relocation information. Run the previously added relocs tool to fill in the .data.relocs section of vmlinux with a table of relocations. The relocs tool will also remove (mark as 0 length) the relocation sections added to vmlinux. When vmlinux is passed to the boot makefile for conversion into a boot image the now empty relocation sections will be removed and the populated relocation table will be included in the binary image. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12983/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: tools: Build relocs toolMatt Redfearn
Build the relocs tool as part of the kbuild Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12980/ Patchwork: https://patchwork.linux-mips.org/patch/13242/ Patchwork: https://patchwork.linux-mips.org/patch/13233/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-22MIPS: Loongson-3: Improve -march option and move it to PlatformHuacai Chen
If GCC >= 4.9 and Binutils >=2.25, we use -march=loongson3a, otherwise we use -march=mips64r2, this can slightly improve performance. Besides, arch/mips/loongson64/Platform is a better location rather than arch/ mips/Makefile. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12161/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-26MIPS: Allow compact branch policy to be changedPaul Burton
When debugging it can be helpful to change the policy for compiler use of MIPSr6 compact branches, in order to rule out or home in on their involvement in bugs. Allow the GCC -mcompact-branches= flag to be set via Kconfig under the "Kernel hacking" menu. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-14MIPS: SB1: Remove support for Pass 1 parts.Ralf Baechle
Pass 1 parts had a number of significant erratas and were only available in small numbers and under NDA. Full support also required the use of a special toolchain that kept branches properly aligned. These workarounds were never upstreamed and the only toolchain known to have them is Montavista's GCC 3.0-based toolchain which completly obsoleted if not useless these days. So now that automated testing has tripped over the user of the -msb1-pass1-workarounds option, rather than fixing it remove support for pass 1 parts. Probably nobody will notice. I seem to own the last know pass 1 board and I haven't noticed another one in the wild in the past decade, at least. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-12MIPS: Fix wrong CHECKFLAGS (sparse builds) with GCC 5.1Aaro Koskinen
GCC 5.1 defines __REGISTER_PREFIX__ to $. This will break sparse command line (and build fails with: /bin/sh: syntax error: unexpected "(") since make tries to expand starting with the dollar sign with a make variable. Prevent that by using double dollar sign. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10025/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-17Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for Linux 4.1. Most noteworthy: - Add more Octeon-optimized crypto functions - Octeon crypto preemption and locking fixes - Little endian support for Octeon - Use correct CSR to soft reset Octeons - Support LEDs on the Octeon-based DSR-1000N - Fix PCI interrupt mapping for the Octeon-based DSR-1000N - Mark prom_free_prom_memory() as __init for a number of systems - Support for Imagination's Pistachio SOC. This includes arch and CLK bits. I'd like to merge pinctrl bits later - Improve parallelism of csum_partial for certain pipelines - Organize DTB files in subdirs like other architectures - Implement read_sched_clock for all MIPS platforms other than Octeon - Massive series of 38 fixes and cleanups for the FPU emulator / kernel - Further FPU remulator work to support new features. This sits on a separate branch which also has been pulled into the 4.1 KVM branch - Clean up and fixes for the SEAD3 eval board; remove unused file - Various updates for Netlogic platforms - A number of small updates for Loongson 3 platforms - Increase the memory limit for ATH79 platforms to 256MB - A fair number of fixes and updates for BCM47xx platforms - Finish the implementation of XPA support - MIPS FDC support. No, not floppy controller but Fast Debug Channel :) - Detect the R16000 used in SGI legacy platforms - Fix Kconfig dependencies for the SSB bus support" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits) MIPS: Makefile: Fix MIPS ASE detection code MIPS: asm: elf: Set O32 default FPU flags MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G MIPS: Kconfig: Disable SMP/CPS for 64-bit MIPS: Hibernate: flush TLB entries earlier MIPS: smp-cps: cpu_set FPU mask if FPU present MIPS: lose_fpu(): Disable FPU when MSA enabled MIPS: ralink: add missing symbol for RALINK_ILL_ACC MIPS: ralink: Fix bad config symbol in PCI makefile. SSB: fix Kconfig dependencies MIPS: Malta: Detect and fix bad memsize values Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard. MIPS: Fix cpu_has_mips_r2_exec_hazard. MIPS: kernel: entry.S: Set correct ISA level for mips_ihb MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter MIPS: unaligned: Fix regular load/store instruction emulation for EVA MIPS: unaligned: Surround load/store macros in do {} while statements ...
generated by cgit (git 2.34.1) at 2024-05-28 03:15:52 +0000