summaryrefslogtreecommitdiff
path: root/arch/mips/boot
AgeCommit message (Collapse)Author
2021-08-21MIPS: mscc: ocelot: mark the phy-mode for internal PHY portsVladimir Oltean
The ocelot driver was converted to phylink, and that expects a valid phy_interface_t. Without a phy-mode, of_get_phy_mode returns PHY_INTERFACE_MODE_NA, which is not ideal because phylink rejects that. The ocelot driver was patched to treat PHY_INTERFACE_MODE_NA as PHY_INTERFACE_MODE_INTERNAL to work with the broken DT blobs, but we should fix the device trees and specify the phy-mode too. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-21MIPS: mscc: ocelot: disable all switch ports by defaultVladimir Oltean
The ocelot switch driver used to ignore ports which do not have a phy-handle property and not probe those, but this is not quite ok since it is valid to not have a phy-handle property if there is a fixed-link. It seems that checking for a phy-handle was a proxy for the proper check which is for the status, but that doesn't make a lot of sense, since the ocelot driver already iterates using for_each_available_child_of_node which skips the disabled ports, so I have no idea. Anyway, a widespread pattern in device trees is for a SoC dtsi to disable by default all hardware, and let board dts files enable what is used. So let's do that and enable only the ports with a phy-handle in the pcb120 and pcb123 device tree files. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-12MIPS: Retire MACH_PISTACHIOJiaxun Yang
Now it can be replaced by generic kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-12MIPS: DTS: Pistachio add missing cpc and cdmmJiaxun Yang
CPC and CDMM addresses are adjustable and we should tell kernel how to place them in devicetree. Note that MACH_PISTACHIO code hardcoded CDMM base to 0x1bdd0000, however it will collide with GIC address range. As we don't have any CDMM device on this platform it won't be a problem. I found another spare range, 0x1bdf0000~0x1be00000 to place CDMM instead. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-12MIPS: generic: Allow generating FIT image for Marduk boardJiaxun Yang
Marduk is based on IMG pistachio SoC. The platform is using MIPS UHI booting protocol and does have a proper devicetree implement, thus it could be a part of generic kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-07-10Merge tag 'mips_5.14_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix for accesing gic via vdso - two build fixes * tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: vdso: Invalid GIC access through VDSO mips: disable branch profiling in boot/decompress.o mips: always link byteswap helpers into decompressor
2021-07-05mips: disable branch profiling in boot/decompress.oRandy Dunlap
Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o to prevent linkage errors. mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict': decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update' mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-07-05mips: always link byteswap helpers into decompressorArnd Bergmann
My series to clean up the unaligned access implementation across architectures caused some mips randconfig builds to fail with: mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel': decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2' It turns out that this problem has already been fixed for the XZ decompressor but now it also shows up in (at least) LZO and LZ4. From my analysis I concluded that the compiler could always have emitted those calls, but the different implementation allowed it to make otherwise better decisions about not inlining the byteswap, which results in the link error when the out-of-line code is missing. While it could be addressed by adding it to the two decompressor implementations that are known to be affected, but as this only adds 112 bytes to the kernel, the safer choice is to always add them. Fixes: c50ec6787536 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions") Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers") Link: https://lore.kernel.org/linux-mm/202106301304.gz2wVY9w-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202106260659.TyMe8mjr-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202106172016.onWT6Tza-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202105231743.JJcALnhS-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-07-01Merge tag 'mips_5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - add support for OpeneEmbed SOM9331 board - Ingenic fixes/improvments - other fixes and cleanups * tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits) MIPS: Fix PKMAP with 32-bit MIPS huge page support MIPS: CI20: Add second percpu timer for SMP. MIPS: CI20: Reduce clocksource to 750 kHz. MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs. dt-bindings: clock: Add documentation for MAC PHY control bindings. MIPS: X1830: Respect cell count of common properties. MIPS: set mips32r5 for virt extensions MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops MIPS: MT extensions are not available on MIPS32r1 mips/kvm: Use BUG_ON instead of if condition followed by BUG MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource() MIPS: add PMD table accounting into MIPS'pmd_alloc_one MIPS: Loongson64: fix spelling of SPDX tag MIPS: ingenic: rs90: Add dedicated VRAM memory region MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B) MIPS: boot: Support specifying UART port on Ingenic SoCs ...
2021-06-30MIPS: CI20: Add second percpu timer for SMP.周琰杰 (Zhou Yanjie)
1.Add a new TCU channel as the percpu timer of core1, this is to prepare for the subsequent SMP support. The newly added channel will not adversely affect the current single-core state. 2.Adjust the position of TCU node to make it consistent with the order in jz4780.dtsi file. Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20 Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30MIPS: CI20: Reduce clocksource to 750 kHz.周琰杰 (Zhou Yanjie)
The original clock (3 MHz) is too fast for the clocksource, there will be a chance that the system may get stuck. Reported-by: Nikolaus Schaller <hns@goldelico.com> Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20 Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs.周琰杰 (Zhou Yanjie)
Add MAC syscon nodes for X1000 SoC and X1830 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30MIPS: X1830: Respect cell count of common properties.周琰杰 (Zhou Yanjie)
If N fields of X cells should be provided, then that's what the devicetree should represent, instead of having one single field of (N * X) cells. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-21MIPS: Loongson64: fix spelling of SPDX tagTom Rix
checkpatch looks for SPDX-License-Identifier. So change the '_' to '-' Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-18MIPS: Loongson64: DTS: Add GMAC support for LS7A PCHQing Zhang
The GMAC module is now supported, enable it. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18MIPS: Loongson64: Add GMAC support for Loongson-2K1000Qing Zhang
The GMAC module is now supported, enable it. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01MIPS: ingenic: rs90: Add dedicated VRAM memory regionPaul Cercueil
Add a 1 MiB memory area dedicated to the video driver. This area will be managed by Linux' CMA, so that the ingenic-drm driver can be sure to always be able to allocate contiguous buffers. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-01MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radioPaul Cercueil
When using the FM radio, we must not have capacitors on the headphones line, since it is used as the antenna. The "FM Radio" widget is removed so that the cap-less mode can be enabled dynamically through DAPM when the line input is used. This widget was useless anyway. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-01MIPS: ingenic: jz4780: Fix I2C nodes to match DT docPaul Cercueil
The "ingenic,jz4780-i2c" should have "ingenic,jz4770-i2c" as a fallback compatible, as per the Device Tree documentation found in Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-01MIPS: boot: Support specifying UART port on Ingenic SoCsPaul Cercueil
Allow specifying from the config the UART to use on Ingenic SoCs when compressed kernel debugging is enabled. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/rs780e-pch.dtsi:24.7-41.5: Warning (unit_address_vs_reg): /bus@10000000/isa: node has a reg or ranges property, but no unit name arch/mips/boot/dts/loongson/rs780e-pch.dtsi:24.7-41.5: Warning (simple_bus_reg): /bus@10000000/isa: simple-bus unit address format error, expected "18000000" Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/ls7a-pch.dtsi:410.7-415.5: Warning (unit_address_vs_reg): /bus@10000000/isa: node has a reg or ranges property, but no unit name arch/mips/boot/dts/loongson/ls7a-pch.dtsi:410.7-415.5: Warning (simple_bus_reg): /bus@10000000/isa: simple-bus unit address format error, expected "18000000" Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts:91.7-96.5: Warning (unit_address_vs_reg): /bus@10000000/isa: node has a reg or ranges property, but no unit name arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts:91.7-96.5: Warning (simple_bus_reg): /bus@10000000/isa: simple-bus unit address format error, expected "18000000" Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/loongson64g-package.dtsi:42.30-49.5: Warning (simple_bus_reg): /bus@1fe00000/serial@1fe001e0: simple-bus unit address format error, expected "1fe00100" arch/mips/boot/dts/loongson/loongson64g-package.dtsi:51.30-59.5: Warning (simple_bus_reg): /bus@1fe00000/serial@1fe001e8: simple-bus unit address format error, expected "1fe00110" Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27mips: dts: loongson: fix DTC unit name warningszhaoxiao
Fixes the following W=1 kernel build warning(s): arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi:26.9-32.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27MIPS: ath79: ar9331: add pause property for the MAC <> switch linkOleksij Rempel
Both, MAC and switch support flow control, so add pause property for the MAC <> switch link. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27MIPS: ath79: ar9331: Add OpeneEmbed SOM9331 BoardOleksij Rempel
Add SOM9331 based Board. It has 3 LAN ports, usb to uart controller and USB type A port. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-27MIPS: SEAD3: Correct Ethernet node nameGeert Uytterhoeven
make dtbs_check: eth@1f010000: $nodename:0: 'eth@1f010000' does not match '^ethernet(@.*)?$' Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-11MIPS:DTS:Correct device id of pcie for Loongnon-2KXiaochuan Mao
from Loongson-2K user manual know that Loongson-2K have two pcie controller pcie0 and pcie1, pcie0 have four port named port0~port3 and pcie1 have 2 port named port0~port1. the device id of port0 is 7a19 in each pcie controller and others are 7a09. Signed-off-by: Xiaochuan Mao <maoxiaochuan@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-23MIPS:DTS:Correct the license for Loongson-2Kxiaochuan mao
make license from GPL3.0 to GPL2.0 Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-23MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2Kxiaochuan mao
from Loongson-2K1000 user manual know that under pci bus the device num is 4, function number is 2 and register is 0x2200 is ohci. the ohci interrupt number is 51. because Loongson-2K1000 has 64 interrupt sources, 0-31 correspond to the device tree liointc0 device node, and the other correspond to liointc1 node. so it should be number 19 correspon to liointc1. Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-21MIPS: Makefile: Replace -pg with CC_FLAGS_FTRACEzhaoxiao
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE makefile variable which architectures can override if a different option should be used for code generation. Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-06mips: bmips: bcm63268: populate device tree nodesÁlvaro Fernández Rojas
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add hsspi-osc clock. - Add watchdog. - Add HS SPI controller - Add NAND controller. - Add USBH PHY. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-06mips: bmips: bcm6368: populate device tree nodesÁlvaro Fernández Rojas
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add watchdog controller. - Add SPI controller. - Add NAND controller. - Add USBH PHY controller. - Add RNG controller. - Add cfi-flash controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-06mips: bmips: bcm6362: populate device tree nodesÁlvaro Fernández Rojas
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add hsspi-osc clock. - Add watchdog. - Add SPI controller. - Add HS SPI controller. - Add NAND controller. - Add USBH PHY. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-06mips: bmips: bcm6358: populate device tree nodesÁlvaro Fernández Rojas
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add watchdog. - Add SPI controller. - Add USBH PHY. - Add cfi-flash. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-06mips: bmips: bcm6328: populate device tree nodesÁlvaro Fernández Rojas
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add hsspi-osc clock. - Add watchdog. - Add HS SPI controller. - Add NAND controller. - Add USBH PHY. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-06mips: bmips: fix syscon-reboot nodesÁlvaro Fernández Rojas
Commit a23c4134955e added the clock controller nodes, incorrectly changing the syscon-reboot nodes addresses. Fixes: a23c4134955e ("MIPS: BMIPS: add clock controller nodes") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-25MIPS: Loongson64: DeviceTree for Loongson-2K1000Qing Zhang
Add DeviceTree files for Loongson-2K1000 processor, currently only supports single-core boot. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Tested-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12MIPS: ingenic: gcw0: SPI panel does not require active-high CSPaul Cercueil
The NT39016 panel is a fun beast, even though the documentation states that the CS line is active-low, it will work just fine if the CS line is configured as active-high, but it won't work if the CS line is forced low or forced high. Since it did actually work with the spi-cs-high property, this is not a bugfix, but we should nonetheless remove that property to match the documentation. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12mips: bmips: bcm63268: include dt-bindingsÁlvaro Fernández Rojas
Now that there are proper device tree bindings we can start using them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12mips: bmips: bcm6368: include dt-bindingsÁlvaro Fernández Rojas
Now that there are proper device tree bindings we can start using them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12mips: bmips: bcm6362: include dt-bindingsÁlvaro Fernández Rojas
Now that there are proper device tree bindings we can start using them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12mips: bmips: bcm6358: include dt-bindingsÁlvaro Fernández Rojas
Now that there are proper device tree bindings we can start using them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12mips: bmips: bcm6328: include dt-bindingsÁlvaro Fernández Rojas
Now that there are proper device tree bindings we can start using them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12mips: bmips: bcm3368: include dt-bindingsÁlvaro Fernández Rojas
Now that there are proper device tree bindings we can start using them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12mips: dts: brcm: allow including header filesÁlvaro Fernández Rojas
Change /include/ with #include in order to be able to include header files from dt-bindings. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-08MIPS: boot/compressed: Copy DTB to aligned addressPaul Cercueil
Since 5.12-rc1, the Device Tree blob must now be properly aligned. Therefore, the decompress routine must be careful to copy the blob at the next aligned address after the kernel image. This commit fixes the kernel sometimes not booting with a Device Tree blob appended to it. Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21Merge tag 'mips_5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added support for Nintendo N64 - added support for Realtek RTL83XX SoCs - kaslr support for Loongson64 - first steps to get rid of set_fs() - DMA runtime coherent/non-coherent selection cleanup - cleanups and fixes * tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (98 commits) Revert "MIPS: Add basic support for ptrace single step" vmlinux.lds.h: catch more UBSAN symbols into .data MIPS: kernel: Drop kgdb_call_nmi_hook MAINTAINERS: Add git tree for KVM/mips MIPS: Use common way to parse elfcorehdr MIPS: Simplify EVA cache handling Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes" MIPS: remove CONFIG_DMA_PERDEV_COHERENT MIPS: remove CONFIG_DMA_MAYBE_COHERENT driver core: lift dma_default_coherent into common code MIPS: refactor the runtime coherent vs noncoherent DMA indicators MIPS/alchemy: factor out the DMA coherent setup MIPS/malta: simplify plat_setup_iocoherency MIPS: Add basic support for ptrace single step MAINTAINERS: replace non-matching patterns for loongson{2,3} MIPS: Make check condition for SDBBP consistent with EJTAG spec mips: Replace lkml.org links with lore Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op" MIPS: crash_dump.c: Simplify copy_oldmem_page() Revert "mips: Manually call fdt_init_reserved_mem() method" ...
2021-02-09MIPS: compressed: fix build with enabled UBSANAlexander Lobakin
Commit 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer UBSAN") added a possibility to build the entire kernel with UBSAN instrumentation for MIPS, with the exception for VDSO. However, self-extracting head wasn't been added to exceptions, so this occurs: mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_wksp': decompress.c:(.text.FSE_buildDTable_wksp+0x278): undefined reference to `__ubsan_handle_shift_out_of_bounds' mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2a8): undefined reference to `__ubsan_handle_shift_out_of_bounds' mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2c4): undefined reference to `__ubsan_handle_shift_out_of_bounds' mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o: decompress.c:(.text.FSE_buildDTable_raw+0x9c): more undefined references to `__ubsan_handle_shift_out_of_bounds' follow Add UBSAN_SANITIZE := n to mips/boot/compressed/Makefile to exclude it from instrumentation scope and fix this issue. Fixes: 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer UBSAN") Cc: stable@vger.kernel.org # 5.0+ Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
generated by cgit (git 2.34.1) at 2024-06-15 17:04:29 +0000