summaryrefslogtreecommitdiff
path: root/arch/mips/dec/setup.c
AgeCommit message (Collapse)Author
2020-10-14MIPS: DEC: Restore bootmem reservation for firmware working memory areaMaciej W. Rozycki
Fix a crash on DEC platforms starting with: VFS: Mounted root (nfs filesystem) on device 0:11. Freeing unused PROM memory: 124k freed BUG: Bad page state in process swapper pfn:00001 page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1 Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124 80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30 00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348 2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000 80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000 ... Call Trace: [<8004bc5c>] show_stack+0x34/0x104 [<8015675c>] bad_page+0xfc/0x128 [<80157714>] free_pcppages_bulk+0x1f4/0x5dc [<801591cc>] free_unref_page+0xc0/0x130 [<8015cb04>] free_reserved_area+0x144/0x1d8 [<805abd78>] kernel_init+0x20/0x100 [<80046070>] ret_from_kernel_thread+0x14/0x1c Disabling lock debugging due to kernel taint caused by an attempt to free bootmem space that as from commit b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") has not been anymore reserved due to the removal of generic MIPS arch code that used to reserve all the memory from the beginning of RAM up to the kernel load address. This memory does need to be reserved on DEC platforms however as it is used by REX firmware as working area, as per the TURBOchannel firmware specification[1]: Table 2-2 REX Memory Regions ------------------------------------------------------------------------- Starting Ending Region Address Address Use ------------------------------------------------------------------------- 0 0xa0000000 0xa000ffff Restart block, exception vectors, REX stack and bss 1 0xa0010000 0xa0017fff Keyboard or tty drivers 2 0xa0018000 0xa001f3ff 1) CRT driver 3 0xa0020000 0xa002ffff boot, cnfg, init and t objects 4 0xa0020000 0xa002ffff 64KB scratch space ------------------------------------------------------------------------- 1) Note that the last 3 Kbytes of region 2 are reserved for backward compatibility with previous system software. ------------------------------------------------------------------------- (this table uses KSEG2 unmapped virtual addresses, which in the MIPS architecture are offset from physical addresses by a fixed value of 0xa0000000 and therefore the regions referred do correspond to the beginning of the physical address space) and we call into the firmware on several occasions throughout the bootstrap process. It is believed that pre-REX firmware used with non-TURBOchannel DEC platforms has the same requirements, as hinted by note #1 cited. Recreate the discarded reservation then, in DEC platform code, removing the crash. References: [1] "TURBOchannel Firmware Specification", On-line version, EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993, Chapter 2 "System Module Firmware", p. 2-5 Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-16MIPS: pass non-NULL dev_id on shared request_irq()afzal mohammed
Recently all usages of setup_irq() was replaced by request_irq(). request_irq() does a few sanity checks that were not done in setup_irq(), if they fail irq registration will fail. One of the check is to ensure that non-NULL dev_id is passed in the case of shared irq. This caused malta on qemu to hang. Fix it by passing handler as dev_id to all request_irq()'s that are shared. For sni, instead of passing non-NULL dev_id, remove shared irq flags. Fixes: ac8fd122e070 ("MIPS: Replace setup_irq() by request_irq()") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-05MIPS: Replace setup_irq() by request_irq()afzal mohammed
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot <lkp@intel.com> of which one was reported by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2017-02-14MIPS: Audit and remove any unnecessary uses of module.hPaul Gortmaker
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan <james.hogan@imgtec.com>
2016-05-17MIPS: DEC: Export `ioasic_ssr_lock' to modulesMaciej W. Rozycki
Fix a modular `declance' regression caused by LMO commit bb46bf30d13f ("DECstation SCSI driver clean-ups.") Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13256/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: DEC: Do not set up the FPU interrupt if no FPUMaciej W. Rozycki
Following the arrangement for processors that wire FPU exceptions to the FPE CPU exception handle the case where no FPU is in use -- which for DECstation systems will only ever happen when the "nofpu" kernel option has been used -- do not register the FPU interrupt in such a case either. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9714/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: DEC: Implement FPU interrupt counterMaciej W. Rozycki
Implement a cheap way to count FPU interrupts for R2k/R3k DECstation systems. Do this manually in handcoded assembly, rather than calling `kstat_incr_irq_this_cpu' that would require setting up a stack frame and a lot of redirection. This is not going to be a problem because the FPU interrupt is local to the CPU and also there is one CPU only anyway. So at bootstrap determine the address of the correct location within `struct irq_desc', and then only refer to it directly in the interrupt handler. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9713/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: DEC: Remove the Halt button interrupt on R4k systemsMaciej W. Rozycki
On R4k DECstations the Halt button is wired to the NMI processor input rather than an ordinary interrupt input such as on R3k DECstations. This is possible with a different design of the CPU daughtercard that routes the Halt button line from the baseboard connector. Additionally the interrupt input has been reused for a different purpose on the KN04 and KN05 R4k CPU daughtercards so it is better kept masked. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29DEC: Whitespace cleanupMaciej W. Rozycki
Commit 7034228792cc561e79ff8600f02884bd4c80e287 [MIPS: Whitespace cleanup.] did a lot of good and a little damage. Revert the damage. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. [ralf@linux-mips.org: Fixed up conflicts in arch/mips/alchemy/common/dbdma.c, arch/mips/cavium-octeon/smp.c and arch/mips/kernel/perf_event.c.] Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> To: linux-kernel@vger.kernel.org Cc: tglx@linutronix.de linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Mark cascade and low level interrupts IRQF_NO_THREADWu Zhangjin
Mark interrupts with no_action handler, cascade interrupts, low level interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them from forced threading. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-07MIPS: Add missing #inclusions of <linux/irq.h>David Howells
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should really include it. Note that this can replace #inclusions of <asm/irq.h>. This is required for the patch to sort out irqflags handling function naming to compile on MIPS. The problem is that these files require access to things like setup_irq() - which isn't available by #including <linux/interrupt.h> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Deforest the function pointer jungle in the time code.Ralf Baechle
Hard to follow who is pointing what to where and why so it's simply getting in the way of the time code renovation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-19[MIPS] DEC: Initialise ioasic_ssr_lockMaciej W. Rozycki
Fix the definition of the ioasic_ssr_lock spinlock to include a proper initialisation. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-09[TC] TURBOchannel support for the DECstationMaciej W. Rozycki
This is the platform-specific part of TURBOchannel bus support for the DECstation. It implements determining whether the bus is actually there, getting bus parameters, IRQ assignments for devices and protected accesses to possibly unoccupied slots that may trigger bus error exceptions. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06[MIPS] Define MIPS_CPU_IRQ_BASE in generic headerAtsushi Nemoto
The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] do_IRQ cleanupAtsushi Nemoto
Now we have both function and macro version of do_IRQ() and the former is used only by DEC and non-preemptive kernel. This patch makes everyone use the macro version and removes the function version. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09[MIPS] DEC: pt_regs fixes for dec_intr_halt.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] Replace board_timer_setup function pointer by plat_timer_setup.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2006-07-02[PATCH] irq-flags: MIPS: Use the new IRQF_ constantsThomas Gleixner
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-19[MIPS] Cleanup memory managment initialization.Ralf Baechle
Historically plat_mem_setup did the entire platform initialization. This was rather impractical because it meant plat_mem_setup had to get away without any kind of memory allocator. To keep old code from breaking plat_setup was just renamed to plat_setup and a second platform initialization hook for anything else was introduced. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19[MIPS] Rewrite all the assembler interrupt handlers to C.Ralf Baechle
Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Make static what ought to be static.Maciej W. Rozycki
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Use physical addresses at the interface level, letting drivers remapMaciej W. Rozycki
them as appropriate. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29System-specific handling of bus errors for DECstation variationsMaciej W. Rozycki
supporting parity errors only for memory (Pmax/3min/Maxine). Fixes for resources decoded by the KN04/KN05 MB ASIC. Additional clean-ups for the ECC handler. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29There is NO port I/O space on the DECstation. Minor clean-ups.Maciej W. Rozycki
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Get rid of early_init. There's more need to make this form ofRalf Baechle
initialization actually useful and as is certainly unmergable with upstream. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit (git 2.34.1) at 2024-06-17 15:04:40 +0000