summaryrefslogtreecommitdiff
path: root/arch/mips/include/asm
AgeCommit message (Collapse)Author
2014-01-23MIPS: include linux/types.hQais Yousef
The file uses u16 type but doesn't include its definition explicitly I was getting this error when including this header in my driver: arch/mips/include/asm/mipsregs.h:644:33: error: unknown type name ‘u16’ Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Steven J. Hill <Steven.Hill@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6212/
2014-01-23MIPS: BCM63XX: use linux/serial_bcm63xx.hFlorian Fainelli
Update the early_printk code to include linux/serial_bcm63xx.h which provides the definitions for the UART block registers. While at it, remove the inclusion of serial_bcm63xx.h which was just there to allow smooth transition. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6203/
2014-01-23MIPS: BCM63XX: move UART register definitionsFlorian Fainelli
Move the BCM63XX UART driver definitions to include/linux/serial_bcm63xx.h such that we do not rely on the MIPS BCM63XX code to provide these for us. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6202/
2014-01-23MIPS: OCTEON: Supply OCTEON+ USB nodes in internal device trees.David Daney
This will be needed by the next patch to use said nodes for probing via the device tree. Signed-off-by: David Daney <david.daney@cavium.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6185/
2014-01-23MIPS: Malta: mux & enable SERIRQ interruptPaul Burton
This patch causes the kernel to mux the SERIRQ interrupt to the SERIRQ pin of the PIIX4 and to enable that interrupt. The kernel depends upon the interrupt when using the SuperIO UARTs (ttyS0 & ttyS1) but previously would not configure it, instead relying upon the bootloader having done so. If that is not the case then the typical result is that the system appears to hang once it reaches userland as no output is displayed on the UART. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6182/
2014-01-23MIPS: Fix build error seen in some configurationsGuenter Roeck
The following build error is seen if CONFIG_32BIT is undefined, CONFIG_64BIT is defined, and CONFIG_MIPS32_O32 is undefined. asm/syscall.h: In function 'mips_get_syscall_arg': arch/mips/include/asm/syscall.h:32:16: error: unused variable 'usp' [-Werror=unused-variable] cc1: all warnings being treated as errors Fixes: c0ff3c53d4f9 ('MIPS: Enable HAVE_ARCH_TRACEHOOK') Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6160/
2014-01-22MIPS: VPE: Remove vpe_getuid and vpe_getgidEric W. Biederman
The linux build-bot recently reported a build error in arch/mips/kernel/vpe.c tree: git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git for-linus head: 261000a56b6382f597bcb12000f55c9ff26a1efb commit: 261000a56b6382f597bcb12000f55c9ff26a1efb [4/4] userns: userns: Remove UIDGID_STRICT_TYPE_CHECKS config: make ARCH=mips maltaaprp_defconfig All error/warnings: arch/mips/kernel/vpe.c: In function 'vpe_open': >> arch/mips/kernel/vpe.c:1086:9: error: incompatible types when assigning to type 'unsigned int' from type 'kuid_t' >> arch/mips/kernel/vpe.c:1087:9: error: incompatible types when assigning to type 'unsigned int' from type 'kgid_t' vim +1086 arch/mips/kernel/vpe.c 863abad4 Jesper Juhl 2010-10-30 1080 return -ENOMEM; 863abad4 Jesper Juhl 2010-10-30 1081 } e01402b1 Ralf Baechle 2005-07-14 1082 v->plen = P_SIZE; e01402b1 Ralf Baechle 2005-07-14 1083 v->load_addr = NULL; e01402b1 Ralf Baechle 2005-07-14 1084 v->len = 0; e01402b1 Ralf Baechle 2005-07-14 1085 d76b0d9b David Howells 2008-11-14 @1086 v->uid = filp->f_cred->fsuid; d76b0d9b David Howells 2008-11-14 @1087 v->gid = filp->f_cred->fsgid; 2600990e Ralf Baechle 2006-04-05 1088 2600990e Ralf Baechle 2006-04-05 1089 v->cwd[0] = 0; 2600990e Ralf Baechle 2006-04-05 1090 ret = getcwd(v->cwd, VPE_PATH_MAX); When examining the code to see what v->uid and v->gid were used for I discovered that the only users in the kernel are vpe_getuid and vpe_getgid, and that vpe_getuid and vpe_getgid are never called. So instead of proposing a conversion to use kuid_t and kgid_t instead of unsigned int/int as I normally would let's just kill this dead code so no one has to worry about it further. Deng-Cheng Zhu said: This is a good catch. vpe_get[u|g]id was originally used by KSPD which has been removed. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Reviewed-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-01-22MIPS: improve checks for noncoherent DMAFelix Fietkau
Only one MIPS development board actually supports enabling/disabling DMA coherency at runtime, so it's not a good idea to push the overhead of checking that configuration setting onto every other supported target as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5912/
2014-01-22MIPS: APRP: Code formatting clean-ups.Steven J. Hill
Clean-up code according to the 'checkpatch.pl' script. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/6097/ Reviewed-by: John Crispin <blogic@openwrt.org>
2014-01-22MIPS: APRP: Add support for Malta CMP platform.Deng-Cheng Zhu
Malta with multi-core CM platforms can now use APRP functionality. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6096/
2014-01-22MIPS: APRP: Add RTLX API support for CMP platforms.Deng-Cheng Zhu
This patch adds RTLX API support for platforms having a CMP. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/6095/ Reviewed-by: John Crispin <blogic@openwrt.org>
2014-01-22MIPS: APRP: Split RTLX support into separate files.Deng-Cheng Zhu
Split the RTLX functionality in preparation for adding support for CMP platforms. Common functions remain in the original file and a new file contains code specific to platforms that do not have a CMP. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/6093/ Reviewed-by: John Crispin <blogic@openwrt.org>
2014-01-22MIPS: APRP: Split VPE loader into separate files.Deng-Cheng Zhu
Split the VPE functionality in preparation for adding support for CMP platforms. Common functions remain in the original file and a new file contains code specific to platforms that do not have a CMP present. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6094/
2014-01-22MIPS: Add support for interAptiv coresLeonid Yegoshin
The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6163/
2014-01-22MIPS: Add processor identifiers for the interAptiv processorsLeonid Yegoshin
Add processor identifiers for UP and MT interAptiv processors. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6151/
2014-01-22MIPS: Add support for FTLBsLeonid Yegoshin
The Fixed Page Size TLB (FTLB) is a set-associative dual entry TLB. Its purpose is to reduce the number of TLB misses by increasing the effective TLB size and keep the implementation complexity to minimum levels. A supported core can have both VTLB and FTLB. Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6139/
2014-01-22MIPS: Add function for flushing the TLB using the TLBINV instructionLeonid Yegoshin
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6136/
2014-01-22MIPS: Add support for the proAptiv coresLeonid Yegoshin
The proAptiv Multiprocessing System is a power efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The proAptiv Multiprocessing System combines a deep pipeline with multi-issue out of order execution for improved computational throughput. The proAptiv Multiprocessing System can contain one to six MIPS32r3 proAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6134/
2014-01-22MIPS: Add processor identifiers for the proAptiv processorsLeonid Yegoshin
Add processor identifiers for single core and multi-core proAptiv processors. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6133/
2014-01-22MIPS: tlb: Set the EHINV bit for TLBINVF cores when invalidating the TLBLeonid Yegoshin
For MIPS32R3 supported cores, the EHINV bit needs to be set when invalidating the TLB. This is necessary because the legacy software method of representing an invalid TLB entry using an unmapped address value is not guaranteed to work. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6132/
2014-01-22MIPS: features: Add initial support for Segmentation Control registersSteven J. Hill
MIPS32R3 introduced a new set of Segmentation Control registers which increase the flexibility of the segmented-based memory scheme. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6131/
2014-01-22MIPS: features: Add initial support for TLBINVF capable coresLeonid Yegoshin
New Aptiv cores support the TLBINVF instruction for flushing the VTLB. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6130/
2014-01-22MIPS: mm: Move UNIQUE_ENTRYHI macro to a header fileMarkos Chandras
The UNIQUE_ENTRYHI definition was duplicated whenever there was the need to flush the TLB entries. We move this common definition to a header file. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6129/
2014-01-22MIPS: Add missing bits for Config registersLeonid Yegoshin
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6128/
2014-01-22MIPS: BCM47XX: add cpu-feature-overrides.hHauke Mehrtens
The BCM47XX SoC code missed a cpu-feature-overrides.h header file, this patch adds it. This code supports a long line of SoCs with different features so for some features we still have to rely on the runtime detection. This was crated by checking the features of a BCM4712, BCM4704, BCM5354, BCM4716 and BCM4706 SoC and then tested on these SoCs. There are some SoCs missing but I hope they do not have any more or less features. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6289/
2014-01-22MIPS: BCM47XX: only print SoC name in system type in cpuinfoHauke Mehrtens
Recently the output of "system type" in /proc/cpuinfo was changed to Broadcom BCM4730 (Some sample board), but it is better to just print the SoC name in the "system type" entry. The board name will be added in the machine entry later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5865/
2014-01-22MIPS: cpu-type: guard BMIPS variants with SYS_HAS_CPU_BMIPS*Jonas Gorski
BMIPS32 and BMIPS3300 also need to be available for MIPS32R1, as bcm47xx might not select BMIPS. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6245/
2014-01-22MIPS: BMIPS: add a smp ops registration helperJonas Gorski
Add a helper similar to the generic register_XXX_smp_ops() for bmips. Register SMP UP ops in case of BMIPS32/3300. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6248/
2014-01-22MIPS: BMIPS: change compile time checks to runtime checksJonas Gorski
Allow building for all bmips cpus at the same time by changing ifdefs to checks for the cpu type, or adding appropriate checks to the assembly. Since BMIPS43XX and BMIPS5000 require different IPI implementations, split the SMP ops into one for each, so the runtime overhead is only at registration time for them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6241/
2014-01-22MIPS: allow asm/cpu.h to be included from assemblyJonas Gorski
Add guards around the enum to allow including cpu.h from assembly. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6238/
2014-01-22MIPS: BCM63XX: add HSSPI platform device and register itJonas Gorski
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6180/
2014-01-22MIPS: BCM63XX: add HSSPI IRQ and register offsetsJonas Gorski
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6179/
2014-01-20Merge branch 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: - futex performance increases: larger hashes, smarter wakeups - mutex debugging improvements - lots of SMP ordering documentation updates - introduce the smp_load_acquire(), smp_store_release() primitives. (There are WIP patches that make use of them - not yet merged) - lockdep micro-optimizations - lockdep improvement: better cover IRQ contexts - liblockdep at last. We'll continue to monitor how useful this is * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) futexes: Fix futex_hashsize initialization arch: Re-sort some Kbuild files to hopefully help avoid some conflicts futexes: Avoid taking the hb->lock if there's nothing to wake up futexes: Document multiprocessor ordering guarantees futexes: Increase hash table size for better performance futexes: Clean up various details arch: Introduce smp_load_acquire(), smp_store_release() arch: Clean up asm/barrier.h implementations using asm-generic/barrier.h arch: Move smp_mb__{before,after}_atomic_{inc,dec}.h into asm/atomic.h locking/doc: Rename LOCK/UNLOCK to ACQUIRE/RELEASE mutexes: Give more informative mutex warning in the !lock->owner case powerpc: Full barrier for smp_mb__after_unlock_lock() rcu: Apply smp_mb__after_unlock_lock() to preserve grace periods Documentation/memory-barriers.txt: Downgrade UNLOCK+BLOCK locking: Add an smp_mb__after_unlock_lock() for UNLOCK+BLOCK barrier Documentation/memory-barriers.txt: Document ACCESS_ONCE() Documentation/memory-barriers.txt: Prohibit speculative writes Documentation/memory-barriers.txt: Add long atomic examples to memory-barriers.txt Documentation/memory-barriers.txt: Add needed ACCESS_ONCE() calls to memory-barriers.txt Revert "smp/cpumask: Make CONFIG_CPUMASK_OFFSTACK=y usable without debug dependency" ...
2014-01-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c net/ipv4/tcp_metrics.c Overlapping changes between the "don't create two tcp metrics objects with the same key" race fix in net and the addition of the destination address in the lookup key in net-next. Minor overlapping changes in bnx2x driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15MIPS: fix blast_icache32 on loongson2Aaro Koskinen
Commit 14bd8c082016 ("MIPS: Loongson: Get rid of Loongson 2 #ifdefery all over arch/mips") failed to add Loongson2 specific blast_icache32 functions. Fix that. The patch fixes the following crash seen with 3.13-rc1: Reserved instruction in kernel code[#1]: [...] Call Trace: blast_icache32_page+0x8/0xb0 r4k_flush_cache_page+0x19c/0x200 do_wp_page.isra.97+0x47c/0xe08 handle_mm_fault+0x938/0x1118 __do_page_fault+0x140/0x540 resume_userspace_check+0x0/0x10 Code: 00200825 64834000 00200825 <bc900000> bc900020 bc900040 bc900060 bc900080 bc9000a0 Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: John Crispin <blogic@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15MIPS: fix case mismatch in local_r4k_flush_icache_range()Huacai Chen
Currently, Loongson-2 call protected_blast_icache_range() and others call protected_loongson23_blast_icache_range(), but I think the correct behavior should be the opposite. BTW, Loongson-3's cache-ops is compatible with MIPS64, but not compatible with Loongson-2. So, rename xxx_loongson23_yyy things to xxx_loongson2_yyy. The patch fixes early boot hang with 3.13-rc1, introduced in commit 14bd8c082016 ("MIPS: Loongson: Get rid of Loongson 2 #ifdefery all over arch/mips"). Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: John Crispin <blogic@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-13MIPS: Support for 64-bit FP with O32 binariesPaul Burton
CPUs implementing MIPS32 R2 may include a 64-bit FPU, just as MIPS64 CPUs do. In order to preserve backwards compatibility a 64-bit FPU will act like a 32-bit FPU (by accessing doubles from the least significant 32 bits of an even-odd pair of FP registers) when the Status.FR bit is zero, again just like a mips64 CPU. The standard O32 ABI is defined expecting a 32-bit FPU, however recent toolchains support use of a 64-bit FPU from an O32 MIPS32 executable. When an ELF executable is built to use a 64-bit FPU a new flag (EF_MIPS_FP64) is set in the ELF header. With this patch the kernel will check the EF_MIPS_FP64 flag when executing an O32 binary, and set Status.FR accordingly. The addition of O32 64-bit FP support lessens the opportunity for optimisation in the FPU emulator, so a CONFIG_MIPS_O32_FP64_SUPPORT Kconfig option is introduced to allow this support to be disabled for those that don't require it. Inspired by an earlier patch by Leonid Yegoshin, but implemented more cleanly & correctly. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6154/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-13MIPS: Remove unused {en,dis}able_fpu macrosPaul Burton
These macros are not used anywhere in the kernel. Remove them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6111/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-12arch: Introduce smp_load_acquire(), smp_store_release()Peter Zijlstra
A number of situations currently require the heavyweight smp_mb(), even though there is no need to order prior stores against later loads. Many architectures have much cheaper ways to handle these situations, but the Linux kernel currently has no portable way to make use of them. This commit therefore supplies smp_load_acquire() and smp_store_release() to remedy this situation. The new smp_load_acquire() primitive orders the specified load against any subsequent reads or writes, while the new smp_store_release() primitive orders the specifed store against any prior reads or writes. These primitives allow array-based circular FIFOs to be implemented without an smp_mb(), and also allow a theoretical hole in rcu_assign_pointer() to be closed at no additional expense on most architectures. In addition, the RCU experience transitioning from explicit smp_read_barrier_depends() and smp_wmb() to rcu_dereference() and rcu_assign_pointer(), respectively resulted in substantial improvements in readability. It therefore seems likely that replacing other explicit barriers with smp_load_acquire() and smp_store_release() will provide similar benefits. It appears that roughly half of the explicit barriers in core kernel code might be so replaced. [Changelog by PaulMck] Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Michael Neuling <mikey@neuling.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Victor Kaplansky <VICTORK@il.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20131213150640.908486364@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17lib: Add missing arch generic-y entries for asm-generic/hash.hDavid S. Miller
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-04clk: Add common __clk_get(), __clk_put() implementationsSylwester Nawrocki
This patch adds common __clk_get(), __clk_put() clkdev helpers that replace their platform specific counterparts when the common clock API is used. The owner module pointer field is added to struct clk so a reference to the clock supplier module can be taken by the clock consumers. The owner module is assigned while the clock is being registered, in functions _clk_register() and __clk_register(). Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-11-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq cleanups from Ingo Molnar: "This is a multi-arch cleanup series from Thomas Gleixner, which we kept to near the end of the merge window, to not interfere with architecture updates. This series (motivated by the -rt kernel) unifies more aspects of IRQ handling and generalizes PREEMPT_ACTIVE" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Make PREEMPT_ACTIVE generic sparc: Use preempt_schedule_irq ia64: Use preempt_schedule_irq m32r: Use preempt_schedule_irq hardirq: Make hardirq bits generic m68k: Simplify low level interrupt handling code genirq: Prevent spurious detection for unconditionally polled interrupts
2013-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM changes from Paolo Bonzini: "Here are the 3.13 KVM changes. There was a lot of work on the PPC side: the HV and emulation flavors can now coexist in a single kernel is probably the most interesting change from a user point of view. On the x86 side there are nested virtualization improvements and a few bugfixes. ARM got transparent huge page support, improved overcommit, and support for big endian guests. Finally, there is a new interface to connect KVM with VFIO. This helps with devices that use NoSnoop PCI transactions, letting the driver in the guest execute WBINVD instructions. This includes some nVidia cards on Windows, that fail to start without these patches and the corresponding userspace changes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits) kvm, vmx: Fix lazy FPU on nested guest arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu arm/arm64: KVM: MMIO support for BE guest kvm, cpuid: Fix sparse warning kvm: Delete prototype for non-existent function kvm_check_iopl kvm: Delete prototype for non-existent function complete_pio hung_task: add method to reset detector pvclock: detect watchdog reset at pvclock read kvm: optimize out smp_mb after srcu_read_unlock srcu: API for barrier after srcu read unlock KVM: remove vm mmap method KVM: IOMMU: hva align mapping page size KVM: x86: trace cpuid emulation when called from emulator KVM: emulator: cleanup decode_register_operand() a bit KVM: emulator: check rex prefix inside decode_register() KVM: x86: fix emulation of "movzbl %bpl, %eax" kvm_host: typo fix KVM: x86: emulate SAHF instruction MAINTAINERS: add tree for kvm.git Documentation/kvm: add a 00-INDEX file ...
2013-11-15mips: handle pgtable_page_ctor() failKirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13preempt: Make PREEMPT_ACTIVE genericThomas Gleixner
No point in having this bit defined by architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130917183629.090698799@linutronix.de
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-11-12Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "The main changes in this cycle are: - (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik van Riel, Peter Zijlstra et al. Yay! - optimize preemption counter handling: merge the NEED_RESCHED flag into the preempt_count variable, by Peter Zijlstra. - wait.h fixes and code reorganization from Peter Zijlstra - cfs_bandwidth fixes from Ben Segall - SMP load-balancer cleanups from Peter Zijstra - idle balancer improvements from Jason Low - other fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED stop_machine: Fix race between stop_two_cpus() and stop_cpus() sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus sched: Fix asymmetric scheduling for POWER7 sched: Move completion code from core.c to completion.c sched: Move wait code from core.c to wait.c sched: Move wait.c into kernel/sched/ sched/wait: Fix __wait_event_interruptible_lock_irq_timeout() sched: Avoid throttle_cfs_rq() racing with period_timer stopping sched: Guarantee new group-entities always have weight sched: Fix hrtimer_cancel()/rq->lock deadlock sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining sched: Fix race on toggling cfs_bandwidth_used sched: Remove extra put_online_cpus() inside sched_setaffinity() sched/rt: Fix task_tick_rt() comment sched/wait: Fix build breakage sched/wait: Introduce prepare_to_wait_event() sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too sched: Remove get_online_cpus() usage sched: Fix race in migrate_swap_stop() ...
2013-11-07Merge remote-tracking branch 'grant/devicetree/next' into for-nextRob Herring
2013-11-06MIPS: Netlogic: replace early_init_devtree() callJayachandran C
The early_init_devtree() API was removed in linux-next for 3.13 with commit "mips: use early_init_dt_scan". This causes Netlogic XLP compile to fail: arch/mips/netlogic/xlp/setup.c:101: undefined reference to `early_init_devtree' Add xlp_early_init_devtree() which uses the __dt_setup_arch() to handle early device tree related initialization to fix this. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
generated by cgit (git 2.34.1) at 2025-09-19 06:07:40 +0000