summaryrefslogtreecommitdiff
path: root/arch/mips/kvm/tlb.c
AgeCommit message (Collapse)Author
2017-06-20KVM: MIPS: Fix maybe-uninitialized build failureJames Cowgill
This commit fixes a "maybe-uninitialized" build failure in arch/mips/kvm/tlb.c when KVM, DYNAMIC_DEBUG and JUMP_LABEL are all enabled. The failure is: In file included from ./include/linux/printk.h:329:0, from ./include/linux/kernel.h:13, from ./include/asm-generic/bug.h:15, from ./arch/mips/include/asm/bug.h:41, from ./include/linux/bug.h:4, from ./include/linux/thread_info.h:11, from ./include/asm-generic/current.h:4, from ./arch/mips/include/generated/asm/current.h:1, from ./include/linux/sched.h:11, from arch/mips/kvm/tlb.c:13: arch/mips/kvm/tlb.c: In function ‘kvm_mips_host_tlb_inv’: ./include/linux/dynamic_debug.h:126:3: error: ‘idx_kernel’ may be used uninitialized in this function [-Werror=maybe-uninitialized] __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \ ^~~~~~~~~~~~~~~~~~ arch/mips/kvm/tlb.c:169:16: note: ‘idx_kernel’ was declared here int idx_user, idx_kernel; ^~~~~~~~~~ There is a similar error relating to "idx_user". Both errors were observed with GCC 6. As far as I can tell, it is impossible for either idx_user or idx_kernel to be uninitialized when they are later read in the calls to kvm_debug, but to satisfy the compiler, add zero initializers to both variables. Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Fixes: 57e3869cfaae ("KVM: MIPS/TLB: Generalise host TLB invalidate to kernel ASID") Cc: <stable@vger.kernel.org> # 4.11+ Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-28KVM: MIPS/VZ: VZ hardware setup for Octeon IIIJames Hogan
Set up hardware virtualisation on Octeon III cores, configuring guest interrupt routing and carving out half of the root TLB for guest use, restoring it back again afterwards. We need to be careful to inhibit TLB shutdown machine check exceptions while invalidating guest TLB entries, since TLB invalidation is not available so guest entries must be invalidated by setting them to unique unmapped addresses, which could conflict with mappings set by the guest or root if recently repartitioned. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-28KVM: MIPS/TLB: Handle virtually tagged icachesJames Hogan
When TLB entries are invalidated in the presence of a virtually tagged icache, such as that found on Octeon CPUs, flush the icache so that we don't get a reserved instruction exception even though the TLB mapping is removed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-28KVM: MIPS: Implement VZ supportJames Hogan
Add the main support for the MIPS Virtualization ASE (A.K.A. VZ) to MIPS KVM. The bulk of this work is in vz.c, with various new state and definitions elsewhere. Enough is implemented to be able to run on a minimal VZ core. Further patches will fill out support for guest features which are optional or can be disabled. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-doc@vger.kernel.org
2017-03-28KVM: MIPS/TLB: Add VZ TLB managementJames Hogan
Add functions for MIPS VZ TLB management to tlb.c. kvm_vz_host_tlb_inv() will be used for invalidating root TLB entries after GPA page tables have been modified due to a KVM page fault. It arranges for a root GPA mapping to be flushed from the TLB, using the gpa_mm ASID or the current GuestID to do the probe. kvm_vz_local_flush_roottlb_all_guests() and kvm_vz_local_flush_guesttlb_all() flush all TLB entries in the corresponding TLB for guest mappings (GPA->RPA for root TLB with GuestID, and all entries for guest TLB). They will be used when starting a new GuestID cycle, when VZ hardware is enabled/disabled, and also when switching to a guest when the guest TLB contents may be stale or belong to a different VM. kvm_vz_guest_tlb_lookup() converts a guest virtual address to a guest physical address using the guest TLB. This will be used to decode guest virtual addresses which are sometimes provided by VZ hardware in CP0_BadVAddr for certain exceptions when the guest physical address is unavailable. kvm_vz_save_guesttlb() and kvm_vz_load_guesttlb() will be used to preserve wired guest VTLB entries while a guest isn't running. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS/Emulate: Use lockless GVA helpers for cache emulationJames Hogan
Use the lockless GVA helpers to implement the reading of guest instructions for emulation. This will allow it to handle asynchronous TLB flushes when they are implemented. This is a little more complicated than the other two cases (get_inst() and dynamic translation) due to the need to emulate the appropriate guest TLB exception when the address isn't present or isn't valid in the guest TLB. Since there are several protected cache ops that may need to be performed safely, this is abstracted by kvm_mips_guest_cache_op() which is passed a protected cache op function pointer and takes care of the lockless operation and fault handling / retry if the op should fail, taking advantage of the new errors which the protected cache ops can now return. This allows the existing advance fault handling which relied on host TLB lookups to be removed, along with the now unused kvm_mips_host_tlb_lookup(), Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS/Emulate: Drop redundant TLB flushes on exceptionsJames Hogan
When exceptions are injected into the MIPS KVM guest, the whole host TLB is flushed (except any entries in the guest KSeg0 range). This is certainly not mandated by the architecture when exceptions are taken (userland can't directly change TLB mappings anyway), and is a pretty heavyweight operation: - There may be hundreds of TLB entries especially when a 512 entry FTLB is present. These are walked and read and conditionally invalidated, so the TLBINV feature can't be used either. - It'll indiscriminately wipe out entries belonging to other memory spaces. A simple ASID regeneration would be much faster to perform, although it'd wipe out the guest KSeg0 mappings too. My suspicion is that this was simply to plaster over the fact that kvm_mips_host_tlb_inv() incorrectly only invalidated TLB entries in the ASID for guest usermode, and not the ASID for guest kernelmode. Now that the recent commit "KVM: MIPS/TLB: Flush host TLB entry in kernel ASID" fixes kvm_mips_host_tlb_inv() to flush TLB entries in the kernelmode ASID when the guest TLB changes, lets drop these calls and the otherwise unused kvm_mips_flush_host_tlb(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS/TLB: Drop kvm_local_flush_tlb_all()James Hogan
Now that KVM no longer uses wired entries we can safely use local_flush_tlb_all() when we need to flush the entire TLB (on the start of a new ASID cycle). This doesn't flush wired entries, which allows other code to use them without KVM clobbering them all the time. It also is more up to date, knowing about the tlbinv architectural feature, flushing of micro TLB on cores where that is necessary (Loongson I believe), and knows to stop the HTW while doing so. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS: Drop vm_init() callbackJames Hogan
Now that the commpage doesn't use wired TLB entries, the per-CPU vm_init() callback is the only work done by kvm_mips_init_vm_percpu(). The trap & emulate implementation doesn't actually need to do anything from vm_init(), and the future VZ implementation would be better served by a kvm_arch_hardware_enable callback anyway. Therefore drop the vm_init() callback entirely, allowing the kvm_mips_init_vm_percpu() function to also be dropped, along with the kvm_mips_instance atomic counter. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS/MMU: Convert commpage fault handling to page tablesJames Hogan
Now that we have GVA page tables and an optimised TLB refill handler in place, convert the handling of commpage faults from the guest kernel to fill the GVA page table and invalidate the TLB entry, rather than filling the wired TLB entry directly. For simplicity we no longer use a wired entry for the commpage (refill should be much cheaper with the fast-path handler anyway). Since we don't need to manipulate the TLB directly any longer, move the function from tlb.c to mmu.c. This puts it closer to the similar functions handling KSeg0 and TLB mapped page faults from the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS/MMU: Convert TLB mapped faults to page tablesJames Hogan
Now that we have GVA page tables and an optimised TLB refill handler in place, convert the handling of page faults in TLB mapped segment from the guest to fill a single GVA page table entry and invalidate the TLB entry, rather than filling a TLB entry pair directly. Also remove the now unused kvm_mips_get_{kernel,user}_asid() functions in mmu.c and kvm_mips_host_tlb_write() in tlb.c. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS/TLB: Generalise host TLB invalidate to kernel ASIDJames Hogan
Refactor kvm_mips_host_tlb_inv() to also be able to invalidate any matching TLB entry in the kernel ASID rather than assuming only the TLB entries in the user ASID can change. Two new bool user/kernel arguments allow the caller to indicate whether the mapping should affect each of the ASIDs for guest user/kernel mode. - kvm_mips_invalidate_guest_tlb() (used by TLBWI/TLBWR emulation) can now invalidate any corresponding TLB entry in both the kernel ASID (guest kernel may have accessed any guest mapping), and the user ASID if the entry being replaced is in guest USeg (where guest user may also have accessed it). - The tlbmod fault handler (and the KSeg0 / TLB mapped / commpage fault handlers in later patches) can now invalidate the corresponding TLB entry in whichever ASID is currently active, since only a single page table will have been updated anyway. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS/TLB: Fix off-by-one in TLB invalidateJames Hogan
kvm_mips_host_tlb_inv() uses the TLBP instruction to probe the host TLB for an entry matching the given guest virtual address, and determines whether a match was found based on whether CP0_Index > 0. This is technically incorrect as an index of 0 (with the high bit clear) is a perfectly valid TLB index. This is harmless at the moment due to the use of at least 1 wired TLB entry for the KVM commpage, however we will soon be ridding ourselves of that particular wired entry so lets fix the condition in case the entry needing invalidation does land at TLB index 0. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS/T&E: active_mm = init_mm in guest contextJames Hogan
Set init_mm as the active_mm and update mm_cpumask(current->mm) to reflect that it isn't active when in guest context. This prevents cache management code from attempting cache flushes on host virtual addresses while in guest context, for example due to a cache management IPIs or later when writing of dynamically translated code hits copy on write. We do this using helpers in static kernel code to avoid having to export init_mm to modules. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-02-03KVM: MIPS: Remove duplicated ASIDs from vcpuJames Hogan
The kvm_vcpu_arch structure contains both mm_structs for allocating MMU contexts (primarily the ASID) but it also copies the resulting ASIDs into guest_{user,kernel}_asid[] arrays which are referenced from uasm generated code. This duplication doesn't seem to serve any purpose, and it gets in the way of generalising the ASID handling across guest kernel/user modes, so lets just extract the ASID straight out of the mm_struct on demand, and in fact there are convenient cpu_context() and cpu_asid() macros for doing so. To reduce the verbosity of this code we do also add kern_mm and user_mm local variables where the kernel and user mm_structs are used. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2016-08-01MIPS: KVM: Reset CP0_PageMask during host TLB flushJames Hogan
KVM sometimes flushes host TLB entries, reading each one to check if it corresponds to a guest KSeg0 address. In the absence of EntryHi.EHInv bits to invalidate the whole entry, the entries will be set to unique virtual addresses in KSeg0 (which is not TLB mapped), spaced 2*PAGE_SIZE apart. The TLB read however will clobber the CP0_PageMask register with whatever page size that TLB entry had, and that same page size will be written back into the TLB entry along with the unique address. This would cause breakage when transparent huge pages are enabled on 64-bit host kernels, since huge page entries will overlap other nearby entries when separated by only 2*PAGE_SIZE, causing a machine check exception. Fix this by restoring the old CP0_PageMask value (which should be set to the normal page size) after reading the TLB entry if we're going to go ahead and invalidate it. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Use virt_to_phys() to get commpage PFNJames Hogan
Calculate the PFN of the commpage using virt_to_phys() instead of CPHYSADDR(). This is more portable as kzalloc() may allocate from XKPhys instead of KSeg0 on 64-bit kernels, which CPHYSADDR() doesn't handle. This is sufficient for highmem kernels too since kzalloc() will allocate from lowmem in KSeg0. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-15MIPS: KVM: Use host CCA for TLB mappingsJames Hogan
KVM TLB mappings for the guest were being created with a cache coherency attribute (CCA) of 3, which is cached incoherent. Create them instead with the default host CCA, which should be the correct one for coherency on SMP systems. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-15MIPS: KVM: Move commpage so 0x0 is unmappedJames Hogan
The comm page which is mapped into the guest kernel address space at 0x0 has the unfortunate side effect of allowing guest kernel NULL pointer dereferences to succeed. The only constraint on this address is that it must be within 32KiB of 0x0, so that single lw/sw instructions (which have 16-bit signed offset fields) can be used to access it, using the zero register as a base. So lets move the comm page as high as possible within that constraint so that 0x0 can be left unmapped, at least for page sizes < 32KiB. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14MIPS: KVM: Use MIPS_ENTRYLO_* defs from mipsregs.hJames Hogan
Convert KVM to use the MIPS_ENTRYLO_* definitions from <asm/mipsregs.h> rather than custom definitions in kvm_host.h Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14MIPS: KVM: Arrayify struct kvm_mips_tlb::tlb_lo*James Hogan
The values of the EntryLo0 and EntryLo1 registers for a TLB entry are stored in separate members of struct kvm_mips_tlb called tlb_lo0 and tlb_lo1 respectively. To allow future code which needs to manipulate arbitrary EntryLo data in the TLB entry to be simpler and less conditional, replace these members with an array of two elements. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14MIPS: KVM: Use dump_tlb_all() for kvm_mips_dump_host_tlbs()James Hogan
KVM implements its own routine for dumping the host TLB entries, but we already have dump_tlb_all() which does something very similar (although it only prints out TLB entries which match the current ASID or are global). Make KVM use dump_tlb_all() along with dump_tlb_regs() to avoid the duplication and inevitable bitrot, allowing TLB dumping enhancements (e.g. for VZ and GuestIDs) to be made in a single place. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14MIPS: KVM: Clean up TLB management hazardsJames Hogan
KVM's host TLB handling routines were using tlbw hazard barrier macros around tlb_read(). Now that hazard barrier macros exist for tlbr, update this case to use them. Also fix various other unnecessary hazard barriers in this code. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14MIPS: KVM: Don't indirect KVM functionsJames Hogan
Several KVM module functions are indirected so that they can be accessed from tlb.c which is statically built into the kernel. This is no longer necessary as the relevant bits of code have moved into mmu.c which is part of the KVM module, so drop the indirections. Note: is_error_pfn() is defined inline in kvm_host.h, so didn't actually require the KVM module to be loaded for it to work anyway. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14MIPS: KVM: Move non-TLB handling code out of tlb.cJames Hogan
Various functions in tlb.c perform higher level MMU handling, but don't strictly need to be statically built into the kernel as they don't directly manipulate TLB entries. Move these functions out into a separate mmu.c which will be built into the KVM kernel module. This allows them to directly reference KVM functions in the KVM kernel module in future. Module exports of these functions have been removed, since they aren't needed outside of KVM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14MIPS: KVM: Convert code to kernel sized typesJames Hogan
Convert the MIPS KVM C code to use standard kernel sized types (e.g. u32) instead of inttypes.h style ones (e.g. uint32_t) or other types as appropriate. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14MIPS: KVM: Convert headers to kernel sized typesJames Hogan
Convert the MIPS kvm_host.h structs, function declaration prototypes and associated definition prototypes to use standard kernel sized types (e.g. u32) instead of inttypes.h style ones (e.g. uint32_t). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small release overall. x86: - miscellaneous fixes - AVIC support (local APIC virtualization, AMD version) s390: - polling for interrupts after a VCPU goes to halted state is now enabled for s390 - use hardware provided information about facility bits that do not need any hypervisor activity, and other fixes for cpu models and facilities - improve perf output - floating interrupt controller improvements. MIPS: - miscellaneous fixes PPC: - bugfixes only ARM: - 16K page size support - generic firmware probing layer for timer and GIC Christoffer Dall (KVM-ARM maintainer) says: "There are a few changes in this pull request touching things outside KVM, but they should all carry the necessary acks and it made the merge process much easier to do it this way." though actually the irqchip maintainers' acks didn't make it into the patches. Marc Zyngier, who is both irqchip and KVM-ARM maintainer, later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more formally and for documentation purposes')" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits) KVM: MTRR: remove MSR 0x2f8 KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same svm: Manage vcpu load/unload when enable AVIC svm: Do not intercept CR8 when enable AVIC svm: Do not expose x2APIC when enable AVIC KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore svm: Add VMEXIT handlers for AVIC svm: Add interrupt injection via AVIC KVM: x86: Detect and Initialize AVIC support svm: Introduce new AVIC VMCB registers KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg KVM: x86: Misc LAPIC changes to expose helper functions KVM: shrink halt polling even more for invalid wakeups KVM: s390: set halt polling to 80 microseconds KVM: halt_polling: provide a way to qualify wakeups during poll KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts kvm: Conditionally register IRQ bypass consumer ...
2016-05-13MIPS: Retrieve ASID masks using function accepting struct cpuinfo_mipsPaul Burton
In preparation for supporting variable ASID masks, retrieve ASID masks using functions in asm/cpu-info.h which accept struct cpuinfo_mips. This will allow those functions to determine the ASID mask based upon the CPU in a later patch. This also allows for the r3k & r8k cases to be handled in Kconfig, which is arguably cleaner than the previous #ifdefs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KVM: Abstract guest ASID maskPaul Burton
In preparation for supporting varied widths of ASID mask in the kernel in general, switch KVM's guest ASIDs to a new KVM_ENTRYHI_ASID definition based on the 8-bit MIPS_ENTRYHI_ASID instead of ASID_MASK. It could potentially be used to support extended guest ASIDs in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-10MIPS: KVM: Fix preemptable kvm_mips_get_*_asid() callsJames Hogan
There are a couple of places in KVM fault handling code which implicitly use smp_processor_id() via kvm_mips_get_kernel_asid() and kvm_mips_get_user_asid() from preemptable context. This is unsafe as a preemption could cause the guest kernel ASID to be changed, resulting in a host TLB entry being written with the wrong ASID. Fix by disabling preemption around the kvm_mips_get_*_asid() call and the corresponding kvm_mips_host_tlb_write(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-03MIPS: Fix misspellings in comments.Adam Buchbinder
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12617/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2016-01-24MIPS: KVM: Convert EXPORT_SYMBOL to _GPLJames Hogan
Export symbols only to GPL modules to match other KVM symbols in virt/kvm/ and arch/*/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11887/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Drop unused kvm_mips_host_tlb_inv_index()James Hogan
The function kvm_mips_host_tlb_inv_index() is unused, so drop it completely. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Trivial whitespace and style fixesJames Hogan
A bunch of misc whitespace and style fixes within arch/mips/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11883/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-15kvm: rename pfn_t to kvm_pfn_tDan Williams
To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-27MIPS: KVM: Add vcpu_get_regs/vcpu_set_regs callbackJames Hogan
Add a vcpu_get_regs() and vcpu_set_regs() callbacks for loading and restoring context which may be in hardware registers. This may include floating point and MIPS SIMD Architecture (MSA) state which may be accessed directly by the guest (but restored lazily by the hypervisor), and also dedicated guest registers as provided by the VZ ASE. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-02KVM: MIPS: Enable after disabling interruptTapasweni Pathak
Enable disabled interrupt, on unsuccessful operation. Found by Coccinelle. Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-06-30MIPS: KVM: Rename files to remove the prefix "kvm_" and "kvm_mips_"Deng-Cheng Zhu
Since all the files are in arch/mips/kvm/, there's no need of the prefixes "kvm_" and "kvm_mips_". Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>