summaryrefslogtreecommitdiff
path: root/arch/mips/loongson64
AgeCommit message (Collapse)Author
2020-10-16Merge tag 'mips_5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - removed support for PNX833x alias NXT_STB22x - included Ingenic SoC support into generic MIPS kernels - added support for new Ingenic SoCs - converted workaround selection to use Kconfig - replaced old boot mem functions by memblock_* - enabled COP2 usage in kernel for Loongson64 to make use of 16byte load/stores possible - cleanups and fixes * tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits) MIPS: DEC: Restore bootmem reservation for firmware working memory area MIPS: dec: fix section mismatch bcm963xx_tag.h: fix duplicated word mips: ralink: enable zboot support MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit MIPS: cpu-probe: introduce exclusive R3k CPU probe MIPS: cpu-probe: move fpu probing/handling into its own file MIPS: replace add_memory_region with memblock MIPS: Loongson64: Clean up numa.c MIPS: Loongson64: Select SMP in Kconfig to avoid build error mips: octeon: Add Ubiquiti E200 and E220 boards MIPS: SGI-IP28: disable use of ll/sc in kernel MIPS: tx49xx: move tx4939_add_memory_regions into only user MIPS: pgtable: Remove used PAGE_USERIO define MIPS: alchemy: Share prom_init implementation MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled MIPS: process: include exec.h header in process.c MIPS: process: Add prototype for function arch_dup_task_struct MIPS: idle: Add prototype for function check_wait ...
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-12MIPS: Loongson64: Clean up numa.cTiezhu Yang
(1) Replace nid_to_addroffset() with nid_to_addrbase() and then remove the related useless code. (2) Since end_pfn = start_pfn + node_psize, use "node_psize" instead of "end_pfn - start_pfn" to avoid the redundant calculation. (3) After commit 6fbde6b492df ("MIPS: Loongson64: Move files to the top-level directory"), CONFIG_ZONE_DMA32 is always set for Loongson64 due to MACH_LOONGSON64 selects ZONE_DMA32, so no need to use ifdef any more, just remove it. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-22MIPS: Loongson-3: Fix fp register access if MSA enabledHuacai Chen
If MSA is enabled, FPU_REG_WIDTH is 128 rather than 64, then get_fpr64() /set_fpr64() in the original unaligned instruction emulation code access the wrong fp registers. This is because the current code doesn't specify the correct index field, so fix it. Fixes: f83e4f9896eff614d0f2547a ("MIPS: Loongson-3: Add some unaligned instructions emulation") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Pei Huang <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-11dma-direct: rename and cleanup __phys_to_dmaChristoph Hellwig
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try to improve the situation by renaming __phys_to_dma to phys_to_dma_unencryped, and not forcing architectures that want to override phys_to_dma to actually provide __phys_to_dma. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-11dma-direct: remove __dma_to_physChristoph Hellwig
There is no harm in just always clearing the SME encryption bit, while significantly simplifying the interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-07MIPS: Loongson64: Remove unused loongson_reboot.Jinyang He
Commit 1bdb7b76705a ("MIPS: Loongson64: Cleanup unused code") left the loongson_reboot unused, delete it. Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-08-07mm/sparse: cleanup the code surrounding memory_present()Mike Rapoport
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent functions that call memory_present() for each region in memblock.memory: sparse_memory_present_with_active_regions() and membocks_present(). Moreover, all architectures have a call to either of these functions preceding the call to sparse_init() and in the most cases they are called one after the other. Mark the regions from memblock.memory as present during sparce_init() by making sparse_init() call memblocks_present(), make memblocks_present() and memory_present() functions static and remove redundant sparse_memory_present_with_active_regions() function. Also remove no longer required HAVE_MEMORY_PRESENT configuration option. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-04MIPS: KVM: Add kvm guest support for Loongson-3Huacai Chen
Loongson-3 KVM guest is based on virtio, it use liointc as its interrupt controller and use GPEX as the pci controller. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-28MIPS: Loongson64: Process ISA Node in DeviceTreeJiaxun Yang
Previously, we're hardcoding reserved ISA I/O Space in, now we're processing it I/O via DeviceTree directly. The ranges property if ISA node is used to determine the size and address of reserved I/O space. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-16MIPS: Loongson64: Load LS7A dtbsJiaxun Yang
Load correct devicetree according to PRID and PCH type. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-08MIPS: Loongson: Rename CPU device-tree bindingHuacai Chen
Loongson-3A R1/R2/R3 and Loongson-3B R1/R2 use the same package naming in dts, and Loongson-3A R4 will be different. In cpu.h the classic 64bit Loongson processors are called Loongson64C (C for classic, pre Loongson- 3A R4), and the new 64bit Loongson processors are called Loongson64G (G for generic, Loongson-3A R4+). To keep consistency and make extensible, we rename the classic "loongson3" prefix to "loongson64c", and the new prefix for Loongson-3A R4+ will be "loongson64g". Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-08MIPS: Unify naming style of vendor CP0.Config6 bitsHuacai Chen
Other vendor-defined registers use the vendor name as a prefix, not an infix, so unify the naming style of CP0.Config6 bits. Suggested-by: Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-06-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "More mm/ work, plenty more to come Subsystems affected by this patch series: slub, memcg, gup, kasan, pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs, thp, mmap, kconfig" * akpm: (131 commits) arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined riscv: support DEBUG_WX mm: add DEBUG_WX support drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid() powerpc/mm: drop platform defined pmd_mknotpresent() mm: thp: don't need to drain lru cache when splitting and mlocking THP hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs sparc32: register memory occupied by kernel as memblock.memory include/linux/memblock.h: fix minor typo and unclear comment mm, mempolicy: fix up gup usage in lookup_node tools/vm/page_owner_sort.c: filter out unneeded line mm: swap: memcg: fix memcg stats for huge pages mm: swap: fix vmstats for huge pages mm: vmscan: limit the range of LRU type balancing mm: vmscan: reclaim writepage is IO cost mm: vmscan: determine anon/file pressure balance at the reclaim root mm: balance LRU lists based on relative thrashing mm: only count actual rotations as LRU reclaim cost ...
2020-06-03mm: use free_area_init() instead of free_area_init_nodes()Mike Rapoport
free_area_init() has effectively became a wrapper for free_area_init_nodes() and there is no point of keeping it. Still free_area_init() name is shorter and more general as it does not imply necessity to initialize multiple nodes. Rename free_area_init_nodes() to free_area_init(), update the callers and drop old version of free_area_init(). Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-6-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-31MIPS: Loongson64: Reorder CPUCFG model match armsWANG Xuerui
Originally the match arms are ordered by model release date, however the LOONGSON_64R cores are even more reduced capability-wise. So put them at top of the switch block. Suggested-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-31MIPS: Expose Loongson CPUCFG availability via HWCAPWANG Xuerui
The point is to allow userspace to probe for CPUCFG without possibly triggering invalid instructions. In addition to that, future Loongson feature bits could all be stuffed into CPUCFG bit fields (or "leaves" in x86-speak) if Loongson does not make mistakes, so ELF HWCAP bits are conserved. Userspace can determine native CPUCFG availability by checking the LCSRP (Loongson CSR Present) bit in CPUCFG output after seeing CPUCFG bit in HWCAP. Native CPUCFG always sets the LCSRP bit, as CPUCFG is part of the Loongson CSR ASE, while the emulation intentionally leaves this bit clear. The other existing Loongson-specific HWCAP bits are, to my best knowledge, unused, as (1) they are fairly recent additions, (2) Loongson never back-ported the patch into their kernel fork, and (3) Loongson's existing installed base rarely upgrade, if ever; However, they are still considered userspace ABI, hence unfortunately unremovable. But hopefully at least we could stop adding new Loongson HWCAP bits in the future. Cc: Paul Burton <paulburton@kernel.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Huacai Chen <chenhc@lemote.com> Signed-off-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-31MIPS: Loongson64: Guard against future cores without CPUCFGWANG Xuerui
Previously it was thought that all future Loongson cores would come with native CPUCFG. From new information shared by Huacai this is definitely not true (maybe some future 2K cores, for example), so collisions at PRID_REV level are inevitable. The CPU model matching needs to take PRID_IMP into consideration. The emulation logic needs to be disabled for those future cores as well, as we cannot possibly encode their non-discoverable features right now. Reported-by: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-30MIPS: Fix build warning about "PTR_STR" redefinitionThomas Bogendoerfer
PTR_STR is redefined when CONFIG_TEST_PRINTF is set. This causes the following build warning: CC lib/test_printf.o lib/test_printf.c:214:0: warning: "PTR_STR" redefined #define PTR_STR "ffff0123456789ab" ^ In file included from ./arch/mips/include/asm/dsemul.h:11:0, from ./arch/mips/include/asm/processor.h:22, from ./arch/mips/include/asm/thread_info.h:16, from ./include/linux/thread_info.h:38, from ./include/asm-generic/preempt.h:5, from ./arch/mips/include/generated/asm/preempt.h:1, from ./include/linux/preempt.h:78, from ./include/linux/spinlock.h:51, from ./include/linux/seqlock.h:36, from ./include/linux/time.h:6, from ./include/linux/stat.h:19, from ./include/linux/module.h:13, from lib/test_printf.c:10: ./arch/mips/include/asm/inst.h:20:0: note: this is the location of the previous definition #define PTR_STR ".dword" ^ Instead of renaming PTR_STR we move the unaligned macros to a new file, which is only included inside MIPS code. This way we can safely include asm.h and can use STR(PTR) again. Fixes: e701656ec4db ("MIPS: inst.h: Stop including asm.h to avoid various build failures") Cc: Maciej W. Rozycki" <macro@linux-mips.org> Reported-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-28MIPS: Loongson64: Remove not used pci.cTiezhu Yang
After commit 6423e59a64e7 ("MIPS: Loongson64: Switch to generic PCI driver"), arch/mips/loongson64/pci.c is not used any more, remove it. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-28MIPS: Loongson64: Define PCI_IOBASEJiaxun Yang
PCI_IOBASE is used to create VM maps for PCI I/O ports, it is required by generic PCI drivers to make memory mapped I/O range work. To deal with legacy drivers that have fixed I/O ports range we reserved 0x10000 in PCI_IOBASE, should be enough for i8259 i8042 stuff. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27MIPS: Loongson64: Switch to generic PCI driverJiaxun Yang
We can now enable generic PCI driver in Kconfig, and remove legacy PCI driver code. Radeon vbios quirk is moved to the platform folder to fit the new structure. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-24MIPS: emulate CPUCFG instruction on older Loongson64 coresWANG Xuerui
CPUCFG is the instruction for querying processor characteristics on newer Loongson processors, much like CPUID of x86. Since the instruction is supposedly designed to provide a unified way to do feature detection (without having to, for example, parse /proc/cpuinfo which is too heavyweight), it is important to provide compatibility for older cores without native support. Fortunately, most of the fields can be synthesized without changes to semantics. Performance is not really big a concern, because feature detection logic is not expected to be invoked very often in typical userland applications. The instruction can't be emulated on LOONGSON_2EF cores, according to FlyGoat's experiments. Because the LWC2 opcode is assigned to other valid instructions on 2E and 2F, no RI exception is raised for us to intercept. So compatibility is only extended back furthest to Loongson-3A1000. Loongson-2K is covered too, as it is basically a remix of various blocks from the 3A/3B models from a kernel perspective. This is lightly based on Loongson's work on their Linux 3.10 fork, for being the authority on the right feature flags to fill in, where things aren't otherwise discoverable. Signed-off-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-24MIPS: Fix exception handler memcpy()Ben Hutchings
The exception handler subroutines are declared as a single char, but when copied to the required addresses the copy length is 0x80. When range checks are enabled for memcpy() this results in a build failure, with error messages such as: In file included from arch/mips/mti-malta/malta-init.c:15: In function 'memcpy', inlined from 'mips_nmi_setup' at arch/mips/mti-malta/malta-init.c:98:2: include/linux/string.h:376:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter 376 | __read_overflow2(); | ^~~~~~~~~~~~~~~~~~ Change the declarations to use type char[]. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: YunQiang Su <syq@debian.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-13MIPS: Only include the platform file neededThomas Bogendoerfer
Instead of including all Platform files, we simply include the needed one and avoid clashes with makefile variables. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-08MIPS: Loongson: Add DMA support for LS7ATiezhu Yang
In the current market, the most used bridge chip on the Loongson platform are RS780E and LS7A, the RS780E bridge chip is already supported by the mainline kernel. If use the default implementation of __phys_to_dma() and __dma_to_phys() in dma-direct.h when CONFIG_ARCH_HAS_PHYS_TO_DMA is not set, it works well used with LS7A on the Loongson single-way and multi-way platform, and also works well used with RS780E on the Loongson single-way platform, but the DMA address will be wrong on the non-node0 used with RS780E on the Loongson multi-way platform. Just as the description in the code comment, the devices get node id from 40 bit of HyperTransport bus, so we extract 2 bit node id (bit 44~45) from 48 bit address space of Loongson CPU and embed it into HyperTransport bus (bit 37-38), this operation can be done only at the software level used with RS780E on the Loongson multi-way platform, because it has no hardware function to translate address of node id, this is a hardware compatibility problem. Device | | DMA address | Host Bridge | | HT bus address (40 bit) | CPU | | physical address (48 bit) | RAM The LS7A has dma_node_id_offset field in the DMA route config register, the hardware can use the dma_node_id_offset to translate address of node id automatically, so we can get correct address when just use the dma_pfn_offset field in struct device. For the above reasons, in order to maintain downward compatibility to support the RS780E bridge chip, it is better to use the platform dependent implementation of __phys_to_dma() and __dma_to_phys(). Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-28MIPS: Loongson: Get host bridge informationTiezhu Yang
Read the address of host bridge configuration space to get the vendor ID and device ID of host bridge, and then we can distinguish various types of host bridge such as LS7A or RS780E. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-24MIPS: Loongson-3: Add some unaligned instructions emulationHuacai Chen
1, Add unaligned gslq, gssq, gslqc1, gssqc1 emulation; 2, Add unaligned gsl{h, w, d}x, gss{h, w, d}x emulation; 3, Add unaligned gslwxc1, gsswxc1, gsldxc1, gssdxc1 emulation. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Pei Huang <huangpei@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-20MIPS: Loongson64: Mark RS780 HPET as brokenJiaxun Yang
This driver is using some dangerous hack to set MMIO address for HPET, which might break systems with other kinds of PCH. Also, as Loongson-3 cpufreq driver never appeared in mainline, this driver rarely got used. So we temporarily mark it as broken until we find a better solution. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-20MIPS: Loongson64: Make RS780E ACPI as a platform driverJiaxun Yang
Make RS780E ACPI as a platform driver so we can enable it by DeviceTree selectively. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-20MIPS: Loongson64: Remove dead RTC codeJiaxun Yang
RTC is now enabled by devicetree. So platform code is no longer needed. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-16mips: loongsoon2ef: remove private clk apiArnd Bergmann
As platforms are moving to COMMON_CLK in general, loongson2ef stuck out as something that has a private implementation but does not actually use it except for setting the frequency of the CPU itself from the loongson2_cpufreq driver. Change that driver to call the register setting function directly and remove the rest of the stub implementation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25MIPS: Loongson64: Load built-in dtbsJiaxun Yang
Load proper dtb according to firmware passed parameters and CPU PRID. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25MIPS: Loongson64: Drop legacy IRQ codeJiaxun Yang
We've made generic irqchip drivers for Loongson-3 platform, it's time to say goodbye to these legacy code. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-19MIPS: Loongson: Do not initialise statics to 0Tiezhu Yang
Fix the following checkpatch error: ERROR: do not initialise statics to 0 #125: FILE: loongson64/numa.c:125: + static unsigned long num_physpages = 0; Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-05MIPS: Replace setup_irq() by request_irq()afzal mohammed
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot <lkp@intel.com> of which one was reported by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-01-31Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...
2020-01-10MIPS: Loongson: Fix potential NULL dereference in loongson3_platform_init()Tiezhu Yang
If kzalloc fails, it should return -ENOMEM, otherwise may trigger a NULL pointer dereference. Fixes: 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2020-01-09MIPS: Loongson64: Fix node_distance()Thomas Bogendoerfer
Local node distance is defined as LOCAL_DISTANCE, which is 10. Use the define to give back correct local distance. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-11-11MIPS: Loongson64: Drop setup_pcimapJiaxun Yang
setup_pcimap is used to setup address windows for Loongson-3 built-in PCI-X controller, but this function is never been used in the real world and lack of support in kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: chenhe@lemote.com
2019-11-11MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdlineJiaxun Yang
All of Loongson firmwares are passing boot cmdline/env in the manner of YAMON/PMON. Thus we can remove duplicated cmdline initialize code and convert to generic fw method. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: chenhe@lemote.com
2019-11-11MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usageHuacai Chen
There are mixed LOONGSON3/LOONGSON64 usages in recently changes, let's establish some rules: 1, In Kconfig symbols, we only use CPU_LOONGSON64, MACH_LOONGSON64 and SYS_HAS_CPU_LOONGSON64, all other derived symbols use "LOONGSON3" since they all not widely-used symbols and sometimes not suitable for all 64-bit Loongson processors. E.g., we use symbols LOONGSON3_ENHANCEMENT, CPU_LOONGSON3_WORKAROUNDS, etc. 2, Hide GSx64/GSx64E in Kconfig title since it is not useful for general users. However, in the full description we use a more detailed manner. E.g., GS264/GS464/GS464E/GS464V. All Kconfig titles and descriptions of Loongson processors and machines have also been updated in this patch for consistency. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-mips@vger.kernel.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com>
2019-11-01Merge tag 'mips_fixes_5.4_3' into mips-nextPaul Burton
Pull in mips-fixes primarily to gain build fixes in order to allow better testing of mips-next. A few MIPS fixes: - Fix VDSO time-related function behavior for systems where we need to fall back to syscalls, but were instead returning bogus results. - A fix to TLB exception handlers for Cavium Octeon systems where they would inadvertently clobber the $1/$at register. - A build fix for bcm63xx configurations. - Switch to using my @kernel.org email address. Signed-off-by: Paul Burton <paulburton@kernel.org>
2019-11-01MIPS: Loongson64: Move files to the top-level directoryJiaxun Yang
Current Loongson-3 code can share among all Loongson64 processors. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: chenhc@lemote.com Cc: paul.burton@mips.com
2019-11-01MIPS: Loongson64: Cleanup unused codeJiaxun Yang
Clean up legacy code after stripping out Loongson2ef code. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: paul.burton@mips.com
2019-11-01MIPS: Fork loongson2ef from loongson64Jiaxun Yang
As later model of GSx64 family processors including 2-series-soc have similar design with initial loongson3a while loongson2e/f seems less identical, we separate loongson2e/f support code out of mach-loongson64 to make our life easier. This patch contains mostly file moving works. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> [paulburton@kernel.org: Squash in the MAINTAINERS updates] Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: paul.burton@mips.com
2019-10-31MIPS: Loongson64: Rename CPU TYPESJiaxun Yang
CPU_LOONGSON2 -> CPU_LOONGSON2EF CPU_LOONGSON3 -> CPU_LOONGSON64 As newer loongson-2 products (2G/2H/2K1000) can share kernel implementation with loongson-3 while 2E/2F are less similar with other LOONGSON64 products. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: chenhc@lemote.com Cc: paul.burton@mips.com
2019-10-10MIPS: Disable Loongson MMI instructions for kernel buildPaul Burton
GCC 9.x automatically enables support for Loongson MMI instructions when using some -march= flags, and then errors out when -msoft-float is specified with: cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’ The kernel shouldn't be using these MMI instructions anyway, just as it doesn't use floating point instructions. Explicitly disable them in order to fix the build with GCC 9.x. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E") Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support") Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform") Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: stable@vger.kernel.org # v2.6.32+ Cc: linux-mips@vger.kernel.org
2019-10-07MIPS: Loongson-3: Add CSR IPI supportHuacai Chen
CSR IPI and legacy MMIO use the same infrastructure, but CSR IPI is faster than legacy MMIO IPI. This patch enable CSR IPI if possible (except for MailBox, because CSR IPI is too complicated for MailBox). Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-mips@vger.kernel.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com>
generated by cgit (git 2.34.1) at 2024-06-23 07:16:46 +0000