summaryrefslogtreecommitdiff
path: root/arch/mips/mm/c-r3k.c
AgeCommit message (Collapse)Author
2016-10-04MIPS: c-r4k: Split user/kernel flush_icache_range()James Hogan
flush_icache_range() is used for both user addresses (i.e. cacheflush(2)), and kernel addresses (as the API documentation describes). This isn't really suitable however for Enhanced Virtual Addressing (EVA) where cache operations on usermode addresses must use a different instruction, and the protected cache ops assume user addresses, making flush_icache_range() ineffective on kernel addresses. Split out a new __flush_icache_user_range() and __local_flush_icache_user_range() for users which actually want to flush usermode addresses (note that flush_icache_user_range() already exists on various architectures but with different arguments). The implementation of flush_icache_range() will be changed in an upcoming commit to use unprotected normal cache ops so as to always work on the kernel mode address space. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14152/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-24mips: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
2013-07-14MIPS: Delete __cpuinit/__CPUINIT usage from MIPS codePaul Gortmaker
commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-03-28Disintegrate asm/system.h for MIPSDavid Howells
Disintegrate asm/system.h for MIPS. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> cc: linux-mips@linux-mips.org
2011-10-20MIPS: cache: Provide cache flush operations for XFSRalf Baechle
Until now flush_kernel_vmap_range() and invalidate_kernel_vmap_range() did not exist on MIPS resulting in heavy cache corruption on XFS filesystems. Left for the post-3.0 time: optimization and make this work with highmem, too. Since the combination of highmem + cache aliases atm doesn't work this isn't a regression. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2505/
2011-04-06update David Miller's old email addressJustin P. Mattock
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-24MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users.Ralf Baechle
Some of the were relying into smp.h being dragged in by another header which of course is fragile. <asm/cpu-info.h> uses smp_processor_id() only in macros and including smp.h there leads to an include loop, so don't change cpu-info.h. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-05[MIPS] Fix WARNING: at kernel/smp.c:290Thomas Bogendoerfer
trap_init issues flush_icache_range(), which uses ipi functions to get icache flushing done on all cpus. But this is done before interrupts are enabled and caused WARN_ON messages. This changeset introduces a new local_flush_icache_range() and uses it before interrupts (and additional CPUs) are enabled to avoid this problem. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-08[MIPS] Atlas, decstation: Fix section mismatches triggered by defconfigsShane McDonald
Resolve these mismatches by defining affected functions with the __cpuinit attribute, rather than __init. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-03-12[MIPS] Fix loads of section missmatchesRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29[MIPS] c-r3k: Implement flush_cache_range()Maciej W. Rozycki
Contrary to the belief of some, the R3000 and related processors did have caches, both a data and an instruction cache. Here is an implementation of r3k_flush_cache_page(), which is the processor-specific back-end for flush_cache_range(), done according to the spec in Documentation/cachetlb.txt. While at it, remove an unused local function: get_phys_page(), do some trivial formatting fixes and modernise debugging facilities. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Fix "no space between function name and open parenthesis" warnings.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-24[MIPS] R3000: local_flush_data_cache_page take a pointer argument.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-01[MIPS] Remove __flush_icache_pageAtsushi Nemoto
__flash_icache_page is unused, so kill it. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Retire flush_icache_page from mm use.Ralf Baechle
On the 34K the redundant cache operations were causing excessive stalls resulting in realtime code running on the second VPE missing its deadline. For all other platforms this patch is just a significant performance improvment as illustrated by below benchmark numbers. Processor, Processes - times in microseconds - smaller is better ------------------------------------------------------------------------------ Host OS Mhz null null open slct sig sig fork exec sh call I/O stat clos TCP inst hndl proc proc proc --------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 25Kf 2.6.18-rc4 533 0.49 1.16 7.57 33.4 30.5 1.34 12.4 5497 17.K 54.K 25Kf 2.6.18-rc4-p 533 0.49 1.16 6.68 23.0 30.7 1.36 8.55 5030 16.K 48.K 4Kc 2.6.18-rc4 80 4.21 15.0 131. 289. 261. 16.5 258. 18.K 70.K 227K 4Kc 2.6.18-rc4-p 80 4.34 13.1 128. 285. 262. 18.2 258. 12.K 52.K 176K 34Kc 2.6.18-rc4 40 5.01 14.0 61.6 90.0 477. 17.9 94.7 29.K 108K 342K 34Kc 2.6.18-rc4-p 40 4.98 13.9 61.2 89.7 475. 17.6 93.7 8758 44.K 158K BCM1480 2.6.18-rc4 700 0.28 0.60 3.68 5.92 16.0 0.78 5.08 931. 3163 15.K BCM1480 2.6.18-rc4-p 700 0.28 0.61 3.65 5.85 16.0 0.79 5.20 395. 1464 8385 TX49-16K 2.6.18-rc3 197 0.73 2.41 19.0 37.8 82.9 2.94 17.5 4438 14.K 56.K TX49-16K 2.6.18-rc3-p 197 0.73 2.40 19.9 36.3 82.9 2.94 23.4 2577 9103 38.K TX49-32K 2.6.18-rc3 396 0.36 1.19 6.80 11.8 41.0 1.46 8.17 2738 8465 32.K TX49-32K 2.6.18-rc3-p 396 0.36 1.19 6.82 10.2 41.0 1.46 8.18 1330 4638 18.K Original patch by me with enhancements by Atsushi Nemoto. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
2006-04-19[MIPS] Handle IDE PIO cache aliases on SMP.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-21[MIPS] War on whitespace: cleanup initial spaces followed by tabs.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Cleanup the mess in cpu_cache_init.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Update MIPS to use the 4-level pagetable code thereby getting rid ofRalf Baechle
the compacrapability headers. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!