summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2013-05-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull stray syscall bits from Al Viro: "Several syscall-related commits that were missing from the original" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE unicore32: just use mmap_pgoff()... unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
2013-05-10Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: - More work on DT support for various platforms - Various fixes that were to late to make it straight into 3.9 - Improved platform support, in particular the Netlogic XLR and BCM63xx, and the SEAD3 and Malta eval boards. - Support for several Ralink SOC families. - Complete support for the microMIPS ASE which basically reencodes the existing MIPS32/MIPS64 ISA to use non-constant size instructions. - Some fallout from LTO work which remove old cruft and will generally make the MIPS kernel easier to maintain and resistant to compiler optimization, even in absence of LTO. - KVM support. While MIPS has announced hardware virtualization extensions this KVM extension uses trap and emulate mode for virtualization of MIPS32. More KVM work to add support for VZ hardware virtualizaiton extensions and MIPS64 will probably already be merged for 3.11. Most of this has been sitting in -next for a long time. All defconfigs have been build or run time tested except three for which fixes are being sent by other maintainers. Semantic conflict with kvm updates done as per Ralf * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits) MIPS: Add new GIC clockevent driver. MIPS: Formatting clean-ups for clocksources. MIPS: Refactor GIC clocksource code. MIPS: Move 'gic_frequency' to common location. MIPS: Move 'gic_present' to common location. MIPS: MIPS16e: Add unaligned access support. MIPS: MIPS16e: Support handling of delay slots. MIPS: MIPS16e: Add instruction formats. MIPS: microMIPS: Optimise 'strnlen' core library function. MIPS: microMIPS: Optimise 'strlen' core library function. MIPS: microMIPS: Optimise 'strncpy' core library function. MIPS: microMIPS: Optimise 'memset' core library function. MIPS: microMIPS: Add configuration option for microMIPS kernel. MIPS: microMIPS: Disable LL/SC and fix linker bug. MIPS: microMIPS: Add vdso support. MIPS: microMIPS: Add unaligned access support. MIPS: microMIPS: Support handling of delay slots. MIPS: microMIPS: Add support for exception handling. MIPS: microMIPS: Floating point support. MIPS: microMIPS: Fix macro naming in micro-assembler. ...
2013-05-09unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINEAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-09Merge branch 'mti-next' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/sjhill/linux-sjhill into mips-for-linux-next
2013-05-09Merge branch 'next/kvm' into mips-for-linux-nextRalf Baechle
2013-05-09MIPS: Add new GIC clockevent driver.Raghu Gandham
Add new clockevent driver that uses the counter present on the MIPS Global Interrupt Controller. Signed-off-by: Raghu Gandham <Raghu.Gandham@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Formatting clean-ups for clocksources.Steven J. Hill
Various whitespace and #ifdef removals for GIC and R4K clocksources. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Refactor GIC clocksource code.Steven J. Hill
Reorganize some of the GIC clocksource driver code. Below is a list of the various changes. * No longer select CSRC_GIC by default for Malta platform. * Limit choice for either the GIC or R4K clocksource, not both. * Change location in Makefile. * Created new 'gic_read_count' function in common 'irq-gic.c' file. * Change 'git_hpt_read' function in 'csrc-gic.c' to use new function. * Surround GIC specific code in Malta platform code with #ifdef's. * Only initialize the GIC clocksource if it was selected. Original code called it unconditionally if a GIC was found. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Move 'gic_frequency' to common location.Steven J. Hill
Move the global variable 'gic_frequency' to be defined in the file 'arch/mips/kernel/irq-gic.c' instead of defining it individually for each platform making use of the GIC. Also change the type to be an unsigned integer instead of signed. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Move 'gic_present' to common location.Steven J. Hill
Move the global variable 'gic_present' to be defined in the file 'arch/mips/kernel/irq-gic.c' instead of defining it individually for each platform making use of the GIC. Also change the type to be an unsigned integer instead of signed. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: MIPS16e: Add unaligned access support.Steven J. Hill
Add logic needed to handle unaligned accesses in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
2013-05-09MIPS: MIPS16e: Support handling of delay slots.Steven J. Hill
Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: MIPS16e: Add instruction formats.Steven J. Hill
Add structures for all the MIPS16e instructions. Also add the enumerations for all the bit fields for opcodes, functions, etc. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Optimise 'strnlen' core library function.Steven J. Hill
Optimise 'strnlen' to use microMIPS instructions and/or optimisations for binary size reduction. When the microMIPS ISA is not being used, the library function compiles to the original binary code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Optimise 'strlen' core library function.Steven J. Hill
Optimise 'strlen' to use microMIPS instructions and/or optimisations for binary size reduction. When the microMIPS ISA is not being used, the library function compiles to the original binary code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Optimise 'strncpy' core library function.Steven J. Hill
Optimise 'strncpy' to use microMIPS instructions and/or optimisations for binary size reduction. When the microMIPS ISA is not being used, the library function compiles to the original binary code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Optimise 'memset' core library function.Steven J. Hill
Optimise 'memset' to use microMIPS instructions and/or optimisations for binary size reduction. When the microMIPS ISA is not being used, the library function compiles to the original binary code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add configuration option for microMIPS kernel.Steven J. Hill
This adds the option to build the Linux kernel using only the microMIPS ISA. The resulting kernel binary is, at a minimum, 20% smaller than using the MIPS32R2 ISA. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Disable LL/SC and fix linker bug.Steven J. Hill
Partially revert commit e0c14a260d66ba35935600d6435940a566fe806b and turn off LL/SC when building a pure microMIPS kernel. This is a temporary fix until the cmpxchg assembly macro functions are re-written to not use the HI/LO registers in address calculations. Also add .insn in selected user access functions which would otherwise produce ISA mode jump incompatibilities. This is also a temporary fix. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add vdso support.Douglas Leung
Support vdso in microMIPS mode. Signed-off-by: Douglas Leung <Douglas.Leung@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add unaligned access support.Leonid Yegoshin
Add logic needed to handle unaligned accesses in microMIPS mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
2013-05-09MIPS: microMIPS: Support handling of delay slots.Leonid Yegoshin
Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add support for exception handling.Steven J. Hill
All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Floating point support.Leonid Yegoshin
Add logic needed to do floating point emulation in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven. Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Fix macro naming in micro-assembler.Steven J. Hill
The macros did not properly take into account the ISA that the kernel was being compiled with. A classic MIPS kernel will have the standard 'uasm_i_##op' macro functions with 'MM_uasm_i_##op' macro functions for the microMIPS version. A pure microMIPS kernel will have the standard macros with 'CL_uasm_i_##op' macro functions for the classic version. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Fix incorrect mask for jump immediate.Steven J. Hill
Jump or branch target addresses have the first bit set. The original mask did not take this into account and will cause a field overflow warning for the target address when a jump immediate instruction is built. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09KVM/MIPS32: Binary patching of select privileged instructions.Sanjay Lal
Currently, the following instructions are translated: - CACHE (indexed) - CACHE (va based): translated to a SYNCI, overkill on D-CACHE operations, but still much faster than a trap. - mfc0/mtc0: the virtual COP0 registers for the guest are implemented as 2-D array. [COP#][SEL] and this is mapped into the guest kernel address space @ VA 0x0. mfc0/mtc0 operations are transformed to load/stores. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: microMIPS: Support dynamic ASID sizing.Steven J. Hill
Changes for pure microMIPS cores to dynamically determine the ASID size at boot time. Includes bug fix https://patchwork.linux-mips.org/patch/5230/ Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org>
2013-05-08MIPS: Allow ASID size to be determined at boot time.Steven J. Hill
Original patch by Ralf Baechle and removed by Harold Koerfgen with commit f67e4ffc79905482c3b9b8c8dd65197bac7eb508. This allows for more generic kernels since the size of the ASID and corresponding masks can be determined at run-time. This patch is also required for the new Aptiv cores and has been tested on Malta and Malta Aptiv platforms. [ralf@linux-mips.org: Added relevant part of fix https://patchwork.linux-mips.org/patch/5213/] Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: FW: malta: Code formatting clean-ups.Steven J. Hill
Clean-up code according to the 'checkpatch.pl' script. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: FW: Remove obsolete header file for MTI platforms.Steven J. Hill
Remove 'arch/mips/include/asm/mips-boards/prom.h' and get rid of all inclusions of it by Malta and SEAD-3 platforms. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: ar7 powertv build"]. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: unbreak powertv build"]. [ralf@linux-mips.org: Test. Build. Your. Fscking. Code. Or...] Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: FW: malta: Use new common FW library variable processing.Steven J. Hill
Remove old YAMON prom code and use common firmware library code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: FW: sead3: Use new common FW library variable processing.Steven J. Hill
Remove old YAMON prom code and use common firmware library code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: FW: Add environment variable processing.Steven J. Hill
Add parsing of the environment and command line variables passed to the kernel to the firmware library. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: Add declarations to MIPS Technologies Inc. generic header.Steven J. Hill
Add declaration of 'mips_scroll_message' and 'mips_display_message' to the common generic header file for the MIPS Technologies Inc. development boards. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: sead3: Use generic suspend/resume for LEDs.Lars-Peter Clausen
Setting the LED_CORE_SUSPENDRESUME flag causes the LED driver core to call led_classdev_suspend/led_classdev_resume during suspend/resume. Since this is exactly what the driver's custom suspend/resume callbacks do we can replace them by setting the LED_CORE_SUSPENDRESUME flag. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: Export symbols used by KVM/MIPS moduleSanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: ASM offsets for VCPU arch specific fields.Sanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: If KVM is enabled then use the KVM specific routine to flush the TLBs ↵Sanjay Lal
on a ASID wrap. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: Export routines needed by the KVM module.Sanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Routines to handle specific traps/exceptions while executing the ↵Sanjay Lal
guest. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Guest interrupt delivery.Sanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: COP0 accesses profiling.Sanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Release notes and KVM module MakefileSanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: MMU/TLB operations for the Guest.Sanjay Lal
- Note that this file is statically linked with the rest of the host kernel (KSEG0). This is because kernel modules are loaded into mapped space on MIPS and we want to make sure that we don't get any host kernel TLB faults while manipulating TLBs. - Virtual Guest TLBs are implemented as 64 entry array regardless of the number of host TLB entries. - Shadow TLBs map Guest virtual addresses to Host physical addresses. - TLB miss handling details: Guest KSEG0 TLBMISS (0x40000000 – 0x60000000): Transparent to the Guest. Guest KSEG2/3 (0x60000000 – 0x80000000) & Guest UM TLBMISS (0x00000000 – 0x40000000) Lookup in Guest/Virtual TLB If an entry doesn’t match deliver appropriate TLBMISS LD/ST exception to the guest If entry does exist in the Guest TLB and is NOT Valid Deliver TLB invalid exception to the guest If entry does exist in the Guest TLB and is VALID Inject the TLB entry into the Shadow TLB Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Privileged instruction/target branch emulation.Sanjay Lal
- The Guest kernel is run in UM and privileged instructions cause a trap. - If the instruction causing the trap is in a branch delay slot, the branch needs to be emulated to figure out the PC @ which the guest will resume execution. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: KVM Guest kernel support.Sanjay Lal
Both Guest kernel and Guest Userspace execute in UM. The memory map is as follows: Guest User address space: 0x00000000 -> 0x40000000 Guest Kernel Unmapped: 0x40000000 -> 0x60000000 Guest Kernel Mapped: 0x60000000 -> 0x80000000 - Guest Usermode virtual memory is limited to 1GB. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: MIPS arch specific APIs for KVMSanjay Lal
- Implements the arch specific APIs for KVM, some are stubs for MIPS - kvm_mips_handle_exit(): Main 'C' distpatch routine for handling exceptions while in "Guest" mode. - Also implements in-kernel timer interrupt support for the guest. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Entry point for trampolining to the guest and trap handlers.Sanjay Lal
- __kvm_mips_vcpu_run: main entry point to enter guest, we save kernel context, load up guest context from and ERET to guest context. - mips32_exception: L1 exception handler(s), save k0/k1 and jump to main handlers. - mips32_GuestException: Generic exception handlers for exceptions/interrupts while in guest context. Save guest context, restore some kernel context and jump to main 'C' handler: kvm_mips_handle_exit() Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>