summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2021-02-04MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS systemBert Vermeulen
This is just enough system to boot the kernel with earlycon working. Signed-off-by: Bert Vermeulen <bert@biot.com> Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-04Add support for Realtek RTL838x/RTL839x switch SoCsBert Vermeulen
The RTL838x/839x family of SoCs are Realtek switches with an embedded MIPS core. * RTL838x - 500MHz 4kce single core - 1Gbit ports and L2 features * RTL839x - 700MHz 34Kc single core - 1Gbit ports and L2 features These switches, depending on the exact part number, will have anywhere between 8 and 52 ports. The MIPS core is wired to a switch cpu port which has a tagging feature allowing us to make use of the DSA subsystem. The SoCs are somewhat basic in certain areas, getting better with more advanced features on newer series. The switch functionality is MMIO-mapped via a large MFD region. The SoCs have the following peripherals * ethernet * switch * uart - ns16550a * spi-flash interface * gpio * wdt * led The code was derived from various vendor SDKs based on Linux v2.6 kernels. This patchset allows us to boot RTL838x/RTL839x units with basic support. Most of the other drivers are already written and functional, and work to get them upstream is already in progress. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bert Vermeulen <bert@biot.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-04MIPS: ralink: manage low reset linesSander Vanheule
Reset lines with indices smaller than 8 are currently considered invalid by the rt2880-reset reset controller. The MT7621 SoC uses a number of these low reset lines. The DTS defines reset lines "hsdma", "fe", and "mcm" with respective values 5, 6, and 2. As a result of the above restriction, these resets cannot be asserted or de-asserted by the reset controller. In cases where the bootloader does not de-assert these lines, this results in e.g. the MT7621's internal switch staying in reset. Change the reset controller to only ignore the system reset, so all reset lines with index greater than 0 are considered valid. Signed-off-by: Sander Vanheule <sander@svanheule.net> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-04MIPS: of: Introduce helper function to get DTBThomas Bogendoerfer
Selection of the DTB to be used was burried in more or less readable code in head.S. Move this code into a inline helper function and use it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2021-02-03arch: mips: kernel: Fix two spelling in smp.cBhaskar Chowdhury
s/logcal/logical/ s/intercpu/inter-CPU/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-03MIPS: malta-time: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./arch/mips/mti-malta/malta-time.c:141:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-03KVM: MIPS: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./arch/mips/kvm/mips.c:151:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-03MIPS: fix kernel_stack_pointer()Huang Pei
MIPS always save kernel stack pointer in regs[29] Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27MIPS: Fix inline asm input/output type mismatch in checksum.h used with ClangTiezhu Yang
Fix the following build error when make M=samples/bpf used with Clang: CLANG-bpf samples/bpf/sockex2_kern.o In file included from samples/bpf/sockex2_kern.c:7: In file included from ./include/uapi/linux/if_tunnel.h:7: In file included from ./include/linux/ip.h:16: In file included from ./include/linux/skbuff.h:28: In file included from ./include/net/checksum.h:22: ./arch/mips/include/asm/checksum.h:161:9: error: unsupported inline asm: input with type 'unsigned long' matching output with type '__wsum' (aka 'unsigned int') : "0" ((__force unsigned long)daddr), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. This is a known issue on MIPS [1], the changed code can be compiled successfully by both GCC and Clang. [1] https://lore.kernel.org/linux-mips/CAG_fn=W0JHf8QyUX==+rQMp8PoULHrsQCa9Htffws31ga8k-iw@mail.gmail.com/ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-27MIPS: mm:remove function __uncached_access()Yanteng Si
MIPS can now use the default uncached_access like other archs. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-27MIPS: loongson2ef: remove function __uncached_access()Yanteng Si
We no longer need the MESA workaround, so remove it. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-27MIPS: asm: spram: remove unneeded semicolonChengyang Fan
Remove a superfluous semicolon after function definition. Signed-off-by: Chengyang Fan <cy.fan@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-27MIPS: vpe: Remove vpe_getcwdThomas Bogendoerfer
I couldn't find any user of the dubious vpe_getcwd so far. So remove it and get rid of another set_fs(KERNEL_DS). Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-27mips: cacheinfo: Remove unnecessary increment of levelSouptick Joarder
kernel test robot throws below warning -> arch/mips/kernel/cacheinfo.c:112:3: warning: Variable 'level' is modified but its new value is never used. [unreadVariable] Remove unnecessary increment of level at the end. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-25MIPS: Add is_jr_ra_ins() to end the loop earlyJinyang He
For those leaf functions, they are likely to have no stack operations. Add is_jr_ra_ins() to determine whether jr ra has been touched before the frame_size is found. Without this patch, the get frame_size operation may be out of range and get the frame_size from the next nested function. There is no POOL32A format in uapi/asm/inst.h, so some bits here use the format of r_format instead. e.g. --------------------------------------------------------------------- | format | 31:26 | 25:21 | 20:16 | 15:6 | 5:0 | -----------------+---------+-------+-------+------------+------------ | pool32a_format | pool32a | rt | rs | jalrc | pool32axf | -----------------+---------+-------+-------+------------+------------ | r_format | opcode | rs | rt | rd:5, re:5 | func | --------------------------------------------------------------------- Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-25MIPS: Fix get_frame_info() handing of function sizeJinyang He
[1]: Commit b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size") [2]: Commit 2b424cfc69728 ("MIPS: Remove function size check in get_frame_info()") First patch added a constant to check the number of iterations against. Second patch fixed the situation that info->func_size is zero. However, func_size member became useless after the second commit. Without ip_end, the get frame_size operation may be out of range although KALLSYMS enabled. Thus, check func_size first. Then make ip_end be the sum of ip and a constant (512) if func_size is equal to 0. Otherwise make ip_end be the sum of ip and func_size. Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-25MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_opJinyang He
mm16_r5_format.rt is 5 bits, so directly judge the value if equal or not. mm_jalr_op requires 7th to 16th bits. These 10 which bits generated by shifting u_format.uimmediate by 6 may be affected by sign extension. Thus, take out the 10 bits for comparison. Without this patch, errors may occur, such as these bits are all ones. Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-25MIPS: process: Remove unnecessary headers inclusionJinyang He
Some headers are not necessary, remove them and sort includes. Signed-off-by: Jinyang He <hejinyang@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-24mips/mm/highmem: use set_pte() for kmap_local()Thomas Gleixner
set_pte_at() on MIPS invokes update_cache() which might recurse into kmap_local(). Use set_pte() like the original MIPS highmem implementation did. Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de Fixes: a4c33e83bca1 ("mips/mm/highmem: Switch to generic kmap atomic") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-24fs: add mount_setattr()Christian Brauner
This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-22MIPS: make kgdb depend on FPU supportArnd Bergmann
kgdb fails to build when the FPU support is disabled: arch/mips/kernel/kgdb.c: In function 'dbg_set_reg': arch/mips/kernel/kgdb.c:147:35: error: 'struct thread_struct' has no member named 'fpu' 147 | memcpy((void *)&current->thread.fpu.fcr31, mem, | ^ arch/mips/kernel/kgdb.c:155:34: error: 'struct thread_struct' has no member named 'fpu' 155 | memcpy((void *)&current->thread.fpu.fpr[fp_reg], mem, This is only relevant for CONFIG_EXPERT=y, so disallowing it in Kconfig is an easier workaround than fixing it properly. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22MIPS: jazz: always allow little-endian buildsArnd Bergmann
The kernel test robot keeps reporting the same bug when it shows up in new files after random unrelated patches: In file included from arch/mips/include/uapi/asm/byteorder.h:13, from arch/mips/include/asm/bitops.h:20, from include/linux/bitops.h:26, from include/linux/kernel.h:12, from include/linux/clk.h:13, from drivers/base/regmap/regmap-mmio.c:7: include/linux/byteorder/big_endian.h:8:2: warning: #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN [-Wcpp] 8 | #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN | ^~~~~~~ drivers/base/regmap/regmap-mmio.c: In function 'regmap_mmio_gen_context': >> drivers/base/regmap/regmap-mmio.c:274:2: error: duplicate case value 274 | case REGMAP_ENDIAN_NATIVE: | ^~~~ drivers/base/regmap/regmap-mmio.c:246:2: note: previously used here 246 | case REGMAP_ENDIAN_NATIVE: The problem is that some randconfig builds end up on the MIPS jazz platform with neither CONFIG_CPU_BIG_ENDIAN nor CONFIG_CPU_LITTLE_ENDIAN because no specific machine is selected. As it turns out, all jazz machines support little-endian kernels, so this can simply be allowed globally. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manualTiezhu Yang
The kernel definitions of MIPSInst_FMA_FUNC and MIPSInst_FMA_FFMT are not consistent with MADD.fmt, NMADD.fmt and NMSUB.fmt in the MIPS64 manual [1], the field func is bit 5..3 and fmt is bit 2..0, fix them. Otherwise there exists error when add new instruction simulation. [1] https://www.mips.com/?do-download=the-mips64-instruction-set-v6-06 Reported-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22mips: Add N64 machine typeLauri Kasanen
Add support for the Nintendo 64. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22Revert "MIPS: Remove unused R4300 CPU support"Lauri Kasanen
This reverts commit f9065b54d437c4660e3d974ad9ce5188c068cd76. We're adding Nintendo 64 support, so the VR4300 is no longer unused. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22MIPS: mm: Add prototype for function __update_cacheYanteng Si
This commit adds a prototype to fix error at W=1: arch/mips/mm/cache.c:129:6: error: no previous prototype for '__update_cache' [-Werror=missing-prototypes] Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22MIPS: mm: abort uaccess retries upon fatal signalThomas Bogendoerfer
When there's a fatal signal pending, MIPS's do_page_fault() implementation returns. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. [ Description taken from commit 746a272e4414 ("ARM: 8692/1: mm: abort uaccess retries upon fatal signal") ] Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Mark Rutland <mark.rutland@arm.com>
2021-01-22arch: mips: Remove CONFIG_OPROFILE supportViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/can/dev.c commit 03f16c5075b2 ("can: dev: can_restart: fix use after free bug") commit 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") Code move. drivers/net/dsa/b53/b53_common.c commit 8e4052c32d6b ("net: dsa: b53: fix an off by one in checking "vlan->vid"") commit b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects") Field rename. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19MIPS: IRQ: Add prototype for function init_IRQYanteng Si
This commit adds a prototype to fix error at W=1: arch/mips/kernel/irq.c:52:13: error: no previous prototype for 'init_IRQ' [-Werror=missing-prototypes] Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-19Revert "MIPS: Octeon: Remove special handling of CONFIG_MIPS_ELF_APPENDED_DTB=y"Kevin Hao
This reverts commit d9df9fb901d25b941ab2cfb5b570d91fb2abf7a3. For the OCTEON boards, it need to patch the built-in DTB before using it. Previously it judges if it is a built-in DTB by checking fw_passed_dtb. But after commit 37e5c69ffd41 ("MIPS: head.S: Init fw_passed_dtb to builtin DTB", the fw_passed_dtb is initialized even when using built-in DTB. This causes the OCTEON boards boot broken due to an unpatched built-in DTB is used. Revert the commit d9df9fb901d2 to restore the codes before the fw_passed_dtb is used and then fix this issue. Fixed: 37e5c69ffd41 ("MIPS: head.S: Init fw_passed_dtb to builtin DTB") Cc: stable@vger.kernel.org Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-18MIPS: relocatable: optimize the relocation processAlexander Lobakin
For now, vmlinux relocation functions for relocatable kernel are implemented as an array of handlers of a particular type. Convert that array into a single switch-case function to: - remove unused arguments; - change the return type of simple handlers to void; - remove the array and don't use any data at all; - avoid using indirect calls; - allow the compiler to inline and greatly optimize the relocation function[s]; and also mark do_relocations() and show_kernel_relocation() static as they aren't used anywhere else. The result on MIPS32 R2 with GCC 10.2 -O2 is: scripts/bloat-o-meter -c arch/mips/kernel/__relocate.o arch/mips/kernel/relocate.o add/remove: 0/6 grow/shrink: 1/0 up/down: 356/-640 (-284) Function old new delta relocate_kernel 852 1208 +356 apply_r_mips_32_rel 20 - -20 apply_r_mips_hi16_rel 40 - -40 apply_r_mips_64_rel 44 - -44 apply_r_mips_26_rel 144 - -144 show_kernel_relocation 164 - -164 do_relocations 228 - -228 Total: Before=1780, After=1496, chg -15.96% add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-76 (-76) Data old new delta reloc_handlers_rel 76 - -76 Total: Before=92, After=16, chg -82.61% add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0) RO Data old new delta Total: Before=0, After=0, chg +0.00% All functions were collapsed into the main one, relocate_kernel(). Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-18MIPS: module: optimize module relocations processingAlexander Lobakin
For now, module relocation functions are implemented as an array of handlers of type reloc_handler_t. Convert that array into a single switch-case function to: - remove unused arguments; - change the return type of simple handlers to void; - remove the array and don't use any data at all; - avoid using indirect calls; - allow the compiler to inline and greatly optimize the relocation function[s]. The result on MIPS32 R2 with GCC 10.2 -O2 is: scripts/bloat-o-meter -c arch/mips/kernel/__module.o arch/mips/kernel/module.o add/remove: 1/11 grow/shrink: 1/0 up/down: 876/-1436 (-560) Function old new delta apply_relocate 456 1148 +692 apply_r_mips_pc - 184 +184 apply_r_mips_none 8 - -8 apply_r_mips_32 16 - -16 apply_r_mips_64 76 - -76 apply_r_mips_highest 88 - -88 apply_r_mips_higher 108 - -108 apply_r_mips_26 132 - -132 apply_r_mips_pc26 160 - -160 apply_r_mips_pc21 160 - -160 apply_r_mips_pc16 160 - -160 apply_r_mips_hi16 172 - -172 apply_r_mips_lo16 356 - -356 Total: Before=2608, After=2048, chg -21.47% add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0) Data old new delta Total: Before=12, After=12, chg +0.00% add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-248 (-248) RO Data old new delta reloc_handlers 248 - -248 Total: Before=248, After=0, chg -100.00% All functions were collapsed into a single one that is called directly by $(srctree)/kernel/module.c. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-18MIPS: VDSO: Use CLANG_FLAGS instead of filtering out '--target='Nathan Chancellor
Commit ee67855ecd9d ("MIPS: vdso: Allow clang's --target flag in VDSO cflags") allowed the '--target=' flag from the main Makefile to filter through to the vDSO. However, it did not bring any of the other clang specific flags for controlling the integrated assembler and the GNU tools locations (--prefix=, --gcc-toolchain=, and -no-integrated-as). Without these, we will get a warning (visible with tinyconfig): arch/mips/vdso/elf.S:14:1: warning: DWARF2 only supports one section per compilation unit .pushsection .note.Linux, "a",@note ; .balign 4 ; .long 2f - 1f ; .long 4484f - 3f ; .long 0 ; 1:.asciz "Linux" ; 2:.balign 4 ; 3: ^ arch/mips/vdso/elf.S:34:2: warning: DWARF2 only supports one section per compilation unit .section .mips_abiflags, "a" ^ All of these flags are bundled up under CLANG_FLAGS in the main Makefile and exported so that they can be added to Makefiles that set their own CFLAGS. Use this value instead of filtering out '--target=' so there is no warning and all of the tools are properly used. Cc: stable@vger.kernel.org Fixes: ee67855ecd9d ("MIPS: vdso: Allow clang's --target flag in VDSO cflags") Link: https://github.com/ClangBuiltLinux/linux/issues/1256 Reported-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-18MIPS: Ingenic: Disable HPTLB for D0 XBurst CPUs tooPaul Cercueil
The JZ4760 has the HPTLB as well, but has a XBurst CPU with a D0 CPUID. Disable the HPTLB for all XBurst CPUs with a D0 CPUID. In the case where there is no HPTLB (e.g. for older SoCs), this won't have any side effect. Fixes: b02efeb05699 ("MIPS: Ingenic: Disable abandoned HPTLB function.") Cc: <stable@vger.kernel.org> # 5.4 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15Merge tag 'mips_fixes_5.11.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix coredumps on 64bit kernels - fix for alignment bugs preventing booting - fix checking for failed irq_alloc_desc calls * tag 'mips_fixes_5.11.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: OCTEON: fix unreachable code in octeon_irq_init_ciu MIPS: relocatable: fix possible boot hangup with KASLR enabled MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB
2021-01-15MIPS: Support binutils configured with --enable-mips-fix-loongson3-llsc=yesAurelien Jarno
From version 2.35, binutils can be configured with --enable-mips-fix-loongson3-llsc=yes, which means it defaults to -mfix-loongson3-llsc. This breaks labels which might then point at the wrong instruction. The workaround to explicitly pass -mno-fix-loongson3-llsc has been added in Linux version 5.1, but is only enabled when building a Loongson 64 kernel. As vendors might use a common toolchain for building Loongson and non-Loongson kernels, just move that workaround to arch/mips/Makefile. At the same time update the comments to reflect the current status. Cc: stable@vger.kernel.org # 5.1+ Cc: YunQiang Su <syq@debian.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: Compare __SYNC_loongson3_war against 0Nathan Chancellor
When building with clang when CONFIG_CPU_LOONGSON3_WORKAROUNDS is enabled: In file included from lib/errseq.c:4: In file included from ./include/linux/atomic.h:7: ./arch/mips/include/asm/atomic.h:52:1: warning: converting the result of '<<' to a boolean always evaluates to true [-Wtautological-constant-compare] ATOMIC_OPS(atomic64, s64) ^ ./arch/mips/include/asm/atomic.h:40:9: note: expanded from macro 'ATOMIC_OPS' return cmpxchg(&v->counter, o, n); ^ ./arch/mips/include/asm/cmpxchg.h:194:7: note: expanded from macro 'cmpxchg' if (!__SYNC_loongson3_war) ^ ./arch/mips/include/asm/sync.h:147:34: note: expanded from macro '__SYNC_loongson3_war' # define __SYNC_loongson3_war (1 << 31) ^ While it is not wrong that the result of this shift is always true in a boolean context, it is not a problem here. Regardless, the warning is really noisy so rather than making the shift a boolean implicitly, use it in an equality comparison so the shift is used as an integer value. Fixes: 4d1dbfe6cbec ("MIPS: atomic: Emit Loongson3 sync workarounds within asm") Fixes: a91f2a1dba44 ("MIPS: cmpxchg: Omit redundant barriers for Loongson3") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: pgtable: fix -Wshadow in asm/pgtable.hAlexander Lobakin
Solves the following repetitive warning when building with -Wshadow: In file included from ./include/linux/pgtable.h:6, from ./include/linux/mm.h:33, from ./include/linux/dax.h:6, from ./include/linux/mempolicy.h:11, from kernel/fork.c:34: ./arch/mips/include/asm/mmu_context.h: In function ‘switch_mm’: ./arch/mips/include/asm/pgtable.h:97:16: warning: declaration of ‘flags’ shadows a previous local [-Wshadow] 97 | unsigned long flags; \ | ^~~~~ ./arch/mips/include/asm/mmu_context.h:162:2: note: in expansion of macro ‘htw_stop’ 162 | htw_stop(); | ^~~~~~~~ In file included from kernel/fork.c:102: ./arch/mips/include/asm/mmu_context.h:159:16: note: shadowed declaration is here 159 | unsigned long flags; | ^~~~~ Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: bitops: fix -Wshadow in asm/bitops.hAlexander Lobakin
Solves the following repetitive warning when building with -Wshadow: In file included from ./include/linux/bitops.h:32, from ./include/linux/kernel.h:11, from ./include/linux/skbuff.h:13, from ./include/linux/if_ether.h:19, from ./include/linux/etherdevice.h:20: ./arch/mips/include/asm/bitops.h: In function ‘test_and_set_bit_lock’: ./arch/mips/include/asm/bitops.h:46:16: warning: declaration of ‘orig’ shadows a previous local [-Wshadow] 46 | unsigned long orig, temp; \ | ^~~~ ./arch/mips/include/asm/bitops.h:190:10: note: in expansion of macro ‘__test_bit_op’ 190 | orig = __test_bit_op(*m, "%0", | ^~~~~~~~~~~~~ ./arch/mips/include/asm/bitops.h:185:21: note: shadowed declaration is here 185 | unsigned long res, orig; | ^~~~ ./arch/mips/include/asm/bitops.h: In function ‘test_and_clear_bit’: ./arch/mips/include/asm/bitops.h:46:16: warning: declaration of ‘orig’ shadows a previous local [-Wshadow] 46 | unsigned long orig, temp; \ | ^~~~ ./arch/mips/include/asm/bitops.h:236:9: note: in expansion of macro ‘__test_bit_op’ 236 | res = __test_bit_op(*m, "%1", | ^~~~~~~~~~~~~ ./arch/mips/include/asm/bitops.h:229:21: note: shadowed declaration is here 229 | unsigned long res, orig; | ^~~~ ./arch/mips/include/asm/bitops.h:46:16: warning: declaration of ‘orig’ shadows a previous local [-Wshadow] 46 | unsigned long orig, temp; \ | ^~~~ ./arch/mips/include/asm/bitops.h:241:10: note: in expansion of macro ‘__test_bit_op’ 241 | orig = __test_bit_op(*m, "%0", | ^~~~~~~~~~~~~ ./arch/mips/include/asm/bitops.h:229:21: note: shadowed declaration is here 229 | unsigned long res, orig; | ^~~~ ./arch/mips/include/asm/bitops.h: In function ‘test_and_change_bit’: ./arch/mips/include/asm/bitops.h:46:16: warning: declaration of ‘orig’ shadows a previous local [-Wshadow] 46 | unsigned long orig, temp; \ | ^~~~ ./arch/mips/include/asm/bitops.h:273:10: note: in expansion of macro ‘__test_bit_op’ 273 | orig = __test_bit_op(*m, "%0", | ^~~~~~~~~~~~~ ./arch/mips/include/asm/bitops.h:266:21: note: shadowed declaration is here 266 | unsigned long res, orig; | ^~~~ Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: select ARCH_WANT_LD_ORPHAN_WARNAlexander Lobakin
Now, after that all the sections are explicitly described and declared in vmlinux.lds.S, we can enable ld orphan warnings to prevent from missing any new sections in future. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: vmlinux.lds.S: explicitly declare .got tableAlexander Lobakin
LLVM stack generates GOT table when building the kernel: ld.lld: warning: <internal>:(.got) is being placed in '.got' According to the debug assertions, it's not zero-sized and thus can't be handled the way it's done for x86. Also use the ARM64 path here and place it at the end of .text section. Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: vmlinux.lds.S: explicitly catch .rel.dyn symbolsAlexander Lobakin
According to linker warnings, both GCC and LLVM generate '.rel.dyn' symbols: mips-alpine-linux-musl-ld: warning: orphan section `.rel.dyn' from `init/main.o' being placed in section `.rel.dyn' Link-time assertion shows that this section is sometimes empty, sometimes not, depending on machine bitness and the compiler [0]: LD .tmp_vmlinux.kallsyms1 mips64-linux-gnu-ld: Unexpected run-time relocations (.rel) detected! Just use the ARM64 approach and declare it in vmlinux.lds.S closer to __init_end. [0] https://lore.kernel.org/linux-mips/20210109111259.GA4213@alpha.franken.de Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: properly stop .eh_frame generationAlexander Lobakin
Commit 866b6a89c6d1 ("MIPS: Add DWARF unwinding to assembly") added -fno-asynchronous-unwind-tables to KBUILD_CFLAGS to prevent compiler from emitting .eh_frame symbols. However, as MIPS heavily uses CFI, that's not enough. Use the approach taken for x86 (as it also uses CFI) and explicitly put CFI symbols into the .debug_frame section (except for VDSO). This allows us to drop .eh_frame from DISCARDS as it's no longer being generated. Fixes: 866b6a89c6d1 ("MIPS: Add DWARF unwinding to assembly") Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: vmlinux.lds.S: add ".gnu.attributes" to DISCARDSAlexander Lobakin
Discard GNU attributes (MIPS FP type, GNU Hash etc.) at link time as kernel doesn't use it at all. Solves a dozen of the following ld warnings (one per every file): mips-alpine-linux-musl-ld: warning: orphan section `.gnu.attributes' from `arch/mips/kernel/head.o' being placed in section `.gnu.attributes' mips-alpine-linux-musl-ld: warning: orphan section `.gnu.attributes' from `init/main.o' being placed in section `.gnu.attributes' Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: CPS: don't create redundant .text.cps-vec sectionAlexander Lobakin
A number of symbols from arch/mips/kernel/cps-vec.S is explicitly placed into '.text.cps-vec' section. There are no direct references to this section, so there's no need to form it. '.balign 0x1000' directive will work anyway. Moreover, this section was being placed in vmlinux differently depending on CONFIG_LD_DEAD_CODE_DATA_ELIMINATION: - with this option enabled, '.text.cps-vec' was being caught by '.text.[0-9a-zA-Z_]*' from include/asm-generic/vmlinux.lds.h; - without this option, '.text.cps-vec' was being caught by discouraging '.text.*' from arch/mips/kernel/vmlinux.lds.S. '.text.*' should not be used in vmlinux linker scripts at all as it silently catches any orphan text sections. So, remove both '.section .text.cps-vec' and '.text.*' from cps-vec.S and vmlinux.lds.S respectively. As said, this does not affect related functions alignment: 80116000 T mips_cps_core_entry 80116028 t not_nmi 80116200 T excep_tlbfill 80116280 T excep_xtlbfill 80116300 T excep_cache 80116380 T excep_genex 80116400 T excep_intex 80116480 T excep_ejtag 80116490 T mips_cps_core_init Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-15MIPS: vmlinux.lds.S: add missing PAGE_ALIGNED_DATA() sectionAlexander Lobakin
MIPS uses its own declaration of rwdata, and thus it should be kept in sync with the asm-generic one. Currently PAGE_ALIGNED_DATA() is missing from the linker script, which emits the following ld warnings: mips-alpine-linux-musl-ld: warning: orphan section `.data..page_aligned' from `arch/mips/kernel/vdso.o' being placed in section `.data..page_aligned' mips-alpine-linux-musl-ld: warning: orphan section `.data..page_aligned' from `arch/mips/vdso/vdso-image.o' being placed in section `.data..page_aligned' Add the necessary declaration, so the mentioned structures will be placed in vmlinux as intended: ffffffff80630580 D __end_once ffffffff80630580 D __start___dyndbg ffffffff80630580 D __start_once ffffffff80630580 D __stop___dyndbg ffffffff80634000 d mips_vdso_data ffffffff80638000 d vdso_data ffffffff80638580 D _gp ffffffff8063c000 T __init_begin ffffffff8063c000 D _edata ffffffff8063c000 T _sinittext -> ffffffff805a4000 D __end_init_task ffffffff805a4000 D __nosave_begin ffffffff805a4000 D __nosave_end ffffffff805a4000 d mips_vdso_data ffffffff805a8000 d vdso_data ffffffff805ac000 D mmlist_lock ffffffff805ac080 D tasklist_lock Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-14bpf: Rename BPF_XADD and prepare to encode other atomics in .immBrendan Jackman
A subsequent patch will add additional atomic operations. These new operations will use the same opcode field as the existing XADD, with the immediate discriminating different operations. In preparation, rename the instruction mode BPF_ATOMIC and start calling the zero immediate BPF_ADD. This is possible (doesn't break existing valid BPF progs) because the immediate field is currently reserved MBZ and BPF_ADD is zero. All uses are removed from the tree but the BPF_XADD definition is kept around to avoid breaking builds for people including kernel headers. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
2021-01-13MIPS: lantiq: irq: register the interrupt controllers with irqchip_initMartin Blumenstingl
Add support for more interrupt controllers by switching from of_irq_init() to irqchip_init() in Lantiq's arch_init_irq(). This requires switching the ICU interrupt controller to use IRQCHIP_DECLARE(), like a real irqchip driver would do. This is needed for future changes when new irqchip drivers are implemented: - a dedicated driver for the EIU interrupt controller - a driver for the MSI PIC (Programmable Interrupt Controller) found on VRX200 and newer SoCs - ..or any other driver which uses IRQCHIP_DECLARE Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
generated by cgit (git 2.34.1) at 2025-08-05 01:09:25 +0000