summaryrefslogtreecommitdiff
path: root/arch/nds32/mm
AgeCommit message (Collapse)Author
2018-06-04Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "This set of changes close the known issues with setting si_code to an invalid value, and with not fully initializing struct siginfo. There remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64 and x86 to get the code that generates siginfo into a simpler and more maintainable state. Most of that work involves refactoring the signal handling code and thus careful code review. Also not included is the work to shrink the in kernel version of struct siginfo. That depends on getting the number of places that directly manipulate struct siginfo under control, as it requires the introduction of struct kernel_siginfo for the in kernel things. Overall this set of changes looks like it is making good progress, and with a little luck I will be wrapping up the siginfo work next development cycle" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits) signal/sh: Stop gcc warning about an impossible case in do_divide_error signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions signal/um: More carefully relay signals in relay_signal. signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code signal/signalfd: Add support for SIGSYS signal/signalfd: Remove __put_user from signalfd_copyinfo signal/xtensa: Use force_sig_fault where appropriate signal/xtensa: Consistenly use SIGBUS in do_unaligned_user signal/um: Use force_sig_fault where appropriate signal/sparc: Use force_sig_fault where appropriate signal/sparc: Use send_sig_fault where appropriate signal/sh: Use force_sig_fault where appropriate signal/s390: Use force_sig_fault where appropriate signal/riscv: Replace do_trap_siginfo with force_sig_fault signal/riscv: Use force_sig_fault where appropriate signal/parisc: Use force_sig_fault where appropriate signal/parisc: Use force_sig_mceerr where appropriate signal/openrisc: Use force_sig_fault where appropriate signal/nios2: Use force_sig_fault where appropriate ...
2018-05-23nds32: Disable local irq before calling cpu_dcache_wb_page in copy_user_highpageVincent Chen
In order to ensure that all data in source page has been written back to memory before copy_page, the local irq shall be disabled before calling cpu_dcache_wb_page(). In addition, removing unneeded page invalidation for 'to' page. Signed-off-by: Vincent Chen <vincentc@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Flush the cache of the page at vmaddr instead of kaddr in flush_anon_pageVincent Chen
According to Documentation/cachetlb.txt, the cache of the page at vmaddr shall be flushed in flush_anon_page instead of the cache of the page at page_address(page). Signed-off-by: Vincent Chen <vincentc@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Correct flush_dcache_page functionVincent Chen
1. Disable local irq before d-cache write-back and invalidate. The cpu_dcache_wbinval_page function is composed of d-cache write-back and invalidate. If the local irq is enabled when calling cpu_dcache_wbinval_page, the content of d-cache is possibly updated between write-back and invalidate. In this case, the updated data will be dropped due to the following d-cache invalidation. Therefore, we disable the local irq before calling cpu_dcache_wbinval_page. 2. Correct the data write-back for page aliasing case. Only the page whose (page->index << PAGE_SHIFT) is located at the same page color as page_address(page) needs to execute data write-back in flush_dcache_page function. Signed-off-by: Vincent Chen <vincentc@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Fix the unaligned access handlerNickhu
If the kernel config 'CONFIG_ALIGNMENT_TRAP' and the file '/proc/sys/nds32/unaligned_access/enable' are set, the kernel unaligned access handler does not handle correctly when the value of immediate field is negative. This commit fixes the unaligned access handler in kernel. Signed-off-by: Nickhu <nickhu@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Renaming the file for unaligned accessNickhu
Change the name of the file '/proc/sys/nds32/unaligned_acess' to '/proc/sys/nds32/unaligned_access' Signed-off-by: Nickhu <nickhu@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Fix the symbols undefined issue by exporting them.Greentime Hu
It broke the 'allmodconfig' build. LD vmlinux SYSMAP System.map Building modules, stage 2. MODPOST 5028 modules ERROR: "flush_dcache_page" [net/sunrpc/xprtrdma/rpcrdma.ko] undefined! ERROR: "empty_zero_page" [net/ceph/libceph.ko] undefined! ERROR: "save_stack_trace" [kernel/backtracetest.ko] undefined! ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined! ERROR: "copy_page" [fs/nilfs2/nilfs2.ko] undefined! ... Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23nds32: Fix xfs_buf built failed by export invalidate_kernel_vmap_range and ↵Greentime Hu
flush_kernel_vmap_range It broke the 'allmodconfig' build. fs/xfs/xfs_buf.c: In function 'xfs_buf_bio_end_io': fs/xfs/xfs_buf.c:1242:3: error: implicit declaration of function 'invalidate_kernel_vmap_range' [-Werror=implicit-function-declaration] invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ fs/xfs/xfs_buf.c: In function 'xfs_buf_ioapply_map': fs/xfs/xfs_buf.c:1312:4: error: implicit declaration of function 'flush_kernel_vmap_range' [-Werror=implicit-function-declaration] flush_kernel_vmap_range(bp->b_addr, ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-04-25signal/nds32: Use force_sig_fault where appropriateEric W. Biederman
Filling in struct siginfo before calling force_sig_info a tedious and error prone process, where once in a great while the wrong fields are filled out, and siginfo has been inconsistently cleared. Simplify this process by using the helper force_sig_fault. Which takes as a parameters all of the information it needs, ensures all of the fiddly bits of filling in struct siginfo are done properly and then calls force_sig_info. In short about a 5 line reduction in code for every time force_sig_info is called, which makes the calling function clearer. Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Acked-by: Vincent Chen <deanbo422@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25signal: Ensure every siginfo we send has all bits initializedEric W. Biederman
Call clear_siginfo to ensure every stack allocated siginfo is properly initialized before being passed to the signal sending functions. Note: It is not safe to depend on C initializers to initialize struct siginfo on the stack because C is allowed to skip holes when initializing a structure. The initialization of struct siginfo in tracehook_report_syscall_exit was moved from the helper user_single_step_siginfo into tracehook_report_syscall_exit itself, to make it clear that the local variable siginfo gets fully initialized. In a few cases the scope of struct siginfo has been reduced to make it clear that siginfo siginfo is not used on other paths in the function in which it is declared. Instances of using memset to initialize siginfo have been replaced with calls clear_siginfo for clarity. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-02-22nds32: Build infrastructureGreentime Hu
This patch adds Makefile, Kconfig and vmlinux.lds.S files required for building an nds32 kernel. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-02-22nds32: Device specific operationsGreentime Hu
This patch introduces ioremap implementations. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-02-22nds32: Cache and TLB routinesGreentime Hu
This patch contains cache and TLB maintenance functions. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-02-22nds32: MMU fault handling and page table managementGreentime Hu
This patch includes page fault handler, mmap and fixup implementations. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-02-22nds32: MMU initializationGreentime Hu
This patch includes memory initializations and highmem supporting. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-02-22nds32: Exception handlingGreentime Hu
This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>