summaryrefslogtreecommitdiff
path: root/arch/openrisc
AgeCommit message (Collapse)Author
2018-04-15Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC fixlet from Stafford Horne: "Just one small thing here, it came in a while back but I didnt have anything in my 4.16 queue, still its the only thing for 4.17 so sending it alone. Small cleanup: remove unused __ARCH_HAVE_MMU define" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: remove unused __ARCH_HAVE_MMU define
2018-04-08openrisc: remove unused __ARCH_HAVE_MMU defineTobias Klauser
The __ARCH_HAVE_MMU define is (and was) used nowhere in the tree and also doesn't appear to be used by any libc. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-04-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual pile of boring changes: - Consolidate tasklet functions to share code instead of duplicating it - The first step for making the low level entry handler management on multi-platform kernels generic - A new sysfs file which allows to retrieve the wakeup state of interrupts. - Ensure that the interrupt thread follows the effective affinity and not the programmed affinity to avoid cross core wakeups. - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm PDC) - Fix the wakeup path clock handling for Reneasas interrupt chips. - Rework the boot time register reset for ARM GIC-V2/3 - Better suspend/resume support for ARM GIV-V3/ITS - Add missing locking to the ARM GIC set_type() callback - Small fixes for the irq simulator code - SPDX identifiers for the irq core code and removal of boiler plate - Small cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) openrisc: Set CONFIG_MULTI_IRQ_HANDLER arm64: Set CONFIG_MULTI_IRQ_HANDLER genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER irqchip/gic: Take lock when updating irq type irqchip/gic: Update supports_deactivate static key to modern api irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling irqchip: Add a driver for the Microsemi Ocelot controller dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn irqchip/gic-v3: Don't try to reset AP0Rn irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs genirq: Remove license boilerplate/references genirq: Add missing SPDX identifiers genirq/matrix: Cleanup SPDX identifier genirq: Cleanup top of file comments genirq: Pass desc to __irq_free instead of irq number irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER ...
2018-04-04openrisc: Set CONFIG_MULTI_IRQ_HANDLERPalmer Dabbelt
arm has an optional MULTI_IRQ_HANDLER, which openrisc copied but didn't make optional. The multi irq handler infrastructure has been copied to generic code selectable with a new config symbol. That symbol can be selected by randconfig builds and can cause build breakage. Introduce CONFIG_MULTI_IRQ_HANDLER as an intermediate step which prevents the core config symbol from being selected. The openrisc local config symbol will be removed once openrisc gets converted to the generic code. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20180404043130.31277-3-palmer@sifive.com
2018-02-22openrisc: add ioremap_nocache declaration before include asm-generic/io.h ↵Greentime Hu
and sync ioremap prototype with it. A future commit for the nds32 architecture bootstrap("asm-generic/io.h: move ioremap_nocache/ioremap_uc/ioremap_wc/ioremap_wt out of ifndef CONFIG_MMU") will move the ioremap_nocache out of the CONFIG_MMU ifdef. This means that in order to suppress re-definition errors we need to setup #define's before importing asm-generic/io.h. Also, the change adds a prototype for ioremap where size is size_t so fix that as well. Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Stafford Horne <shorne@gmail.com>
2018-02-01Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...
2018-02-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Add a console_msg_format command line option: The value "default" keeps the old "[time stamp] text\n" format. The value "syslog" allows to see the syslog-like "<log level>[timestamp] text" format. This feature was requested by people doing regression tests, for example, 0day robot. They want to have both filtered and full logs at hands. - Reduce the risk of softlockup: Pass the console owner in a busy loop. This is a new approach to the old problem. It was first proposed by Steven Rostedt on Kernel Summit 2017. It marks a context in which the console_lock owner calls console drivers and could not sleep. On the other side, printk() callers could detect this state and use a busy wait instead of a simple console_trylock(). Finally, the console_lock owner checks if there is a busy waiter at the end of the special context and eventually passes the console_lock to the waiter. The hand-off works surprisingly well and helps in many situations. Well, there is still a possibility of the softlockup, for example, when the flood of messages stops and the last owner still has too much to flush. There is increasing number of people having problems with printk-related softlockups. We might eventually need to get better solution. Anyway, this looks like a good start and promising direction. - Do not allow to schedule in console_unlock() called from printk(): This reverts an older controversial commit. The reschedule helped to avoid softlockups. But it also slowed down the console output. This patch is obsoleted by the new console waiter logic described above. In fact, the reschedule made the hand-off less effective. - Deprecate "%pf" and "%pF" format specifier: It was needed on ia64, ppc64 and parisc64 to dereference function descriptors and show the real function address. It is done transparently by "%ps" and "pS" format specifier now. Sergey Senozhatsky found that all the function descriptors were in a special elf section and could be easily detected. - Remove printk_symbol() API: It has been obsoleted by "%pS" format specifier, and this change helped to remove few continuous lines and a less intuitive old API. - Remove redundant memsets: Sergey removed unnecessary memset when processing printk.devkmsg command line option. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits) printk: drop redundant devkmsg_log_str memsets printk: Never set console_may_schedule in console_trylock() printk: Hide console waiter logic into helpers printk: Add console owner and waiter logic to load balance console writes kallsyms: remove print_symbol() function checkpatch: add pF/pf deprecation warning symbol lookup: introduce dereference_symbol_descriptor() parisc64: Add .opd based function descriptor dereference powerpc64: Add .opd based function descriptor dereference ia64: Add .opd based function descriptor dereference sections: split dereference_function_descriptor() openrisc: Fix conflicting types for _exext and _stext lib: do not use print_symbol() irq debug: do not use print_symbol() sysfs: do not use print_symbol() drivers: do not use print_symbol() x86: do not use print_symbol() unicore32: do not use print_symbol() sh: do not use print_symbol() mn10300: do not use print_symbol() ...
2018-01-30Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo cleanups from Eric Biederman: "Long ago when 2.4 was just a testing release copy_siginfo_to_user was made to copy individual fields to userspace, possibly for efficiency and to ensure initialized values were not copied to userspace. Unfortunately the design was complex, it's assumptions unstated, and humans are fallible and so while it worked much of the time that design failed to ensure unitialized memory is not copied to userspace. This set of changes is part of a new design to clean up siginfo and simplify things, and hopefully make the siginfo handling robust enough that a simple inspection of the code can be made to ensure we don't copy any unitializied fields to userspace. The design is to unify struct siginfo and struct compat_siginfo into a single definition that is shared between all architectures so that anyone adding to the set of information shared with struct siginfo can see the whole picture. Hopefully ensuring all future si_code assignments are arch independent. The design is to unify copy_siginfo_to_user32 and copy_siginfo_from_user32 so that those function are complete and cope with all of the different cases documented in signinfo_layout. I don't think there was a single implementation of either of those functions that was complete and correct before my changes unified them. The design is to introduce a series of helpers including force_siginfo_fault that take the values that are needed in struct siginfo and build the siginfo structure for their callers. Ensuring struct siginfo is built correctly. The remaining work for 4.17 (unless someone thinks it is post -rc1 material) is to push usage of those helpers down into the architectures so that architecture specific code will not need to deal with the fiddly work of intializing struct siginfo, and then when struct siginfo is guaranteed to be fully initialized change copy siginfo_to_user into a simple wrapper around copy_to_user. Further there is work in progress on the issues that have been documented requires arch specific knowledge to sort out. The changes below fix or at least document all of the issues that have been found with siginfo generation. Then proceed to unify struct siginfo the 32 bit helpers that copy siginfo to and from userspace, and generally clean up anything that is not arch specific with regards to siginfo generation. It is a lot but with the unification you can of siginfo you can already see the code reduction in the kernel" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits) signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr mm/memory_failure: Remove unused trapno from memory_failure signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap signal: Helpers for faults with specialized siginfo layouts signal: Add send_sig_fault and force_sig_fault signal: Replace memset(info,...) with clear_siginfo for clarity signal: Don't use structure initializers for struct siginfo signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered ptrace: Use copy_siginfo in setsiginfo and getsiginfo signal: Unify and correct copy_siginfo_to_user32 signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32 signal: Unify and correct copy_siginfo_from_user32 signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h signal/powerpc: Remove redefinition of NSIGTRAP on powerpc signal: Move addr_lsb into the _sigfault union for clarity ...
2018-01-12signal/openrisc: Fix do_unaligned_access to send the proper signalEric W. Biederman
While reviewing the signal sending on openrisc the do_unaligned_access function stood out because it is obviously wrong. A comment about an si_code set above when actually si_code is never set. Leading to a random si_code being sent to userspace in the event of an unaligned access. Looking further SIGBUS BUS_ADRALN is the proper pair of signal and si_code to send for an unaligned access. That is what other architectures do and what is required by posix. Given that do_unaligned_access is broken in a way that no one can be relying on it on openrisc fix the code to just do the right thing. Cc: stable@vger.kernel.org Fixes: 769a8a96229e ("OpenRISC: Traps") Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: openrisc@lists.librecores.org Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-09Construct init thread stack in the linker script rather than by unionDavid Howells
Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09openrisc: Make THREAD_SIZE available to vmlinux.ldsDavid Howells
Make THREAD_SIZE available to vmlinux.lds on openrisc by including asm/thread_info.h the linker script. This allows init_stack to be allocated in the linker script in a subsequent patch. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stafford Horne <shorne@gmail.com> cc: Jonas Bonn <jonas@southpole.se> cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> cc: openrisc@lists.librecores.org
2018-01-09openrisc: Fix conflicting types for _exext and _stextJoel Stanley
The printk tree in linux-next has a patch "symbol lookup: introduce dereference_symbol_descriptor()" that includes sections.h in kallsyms.h, so arch/openrisc/kernel/traps.c gets a second extern definition for _etext and _stext. Remove the local definitions and include sections.h directly in preparation for the kallsyms.h change. This fixes the following (future) build error: CC arch/openrisc/kernel/traps.o arch/openrisc/kernel/traps.c:43:13: error: conflicting types for ‘_etext’ extern char _etext, _stext; ^ In file included from ./arch/openrisc/include/generated/asm/sections.h:1:0, from ./include/linux/kallsyms.h:15, from arch/openrisc/kernel/traps.c:35: ./include/asm-generic/sections.h:35:32: note: previous declaration of ‘_etext’ was here extern char _text[], _stext[], _etext[]; ^ Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-01-03arch: Remove clkdev.h asm-generic from KbuildStephen Boyd
Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King <linux@armlinux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: <linux-arch@vger.kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-05bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program typeHendrik Brueckner
Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") introduced the bpf_perf_event_data structure which exports the pt_regs structure. This is OK for multiple architectures but fail for s390 and arm64 which do not export pt_regs. Programs using them, for example, the bpf selftest fail to compile on these architectures. For s390, exporting the pt_regs is not an option because s390 wants to allow changes to it. For arm64, there is a user_pt_regs structure that covers parts of the pt_regs structure for use by user space. To solve the broken uapi for s390 and arm64, introduce an abstract type for pt_regs and add an asm/bpf_perf_event.h file that concretes the type. An asm-generic header file covers the architectures that export pt_regs today. The arch-specific enablement for s390 and arm64 follows in separate commits. Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-15kmemcheck: remove annotationsLevin, Alexander (Sasha Levin)
Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-13Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC updates from Stafford Horne: "The OpenRISC work is a bit more interesting this time, adding SMP support and a few general cleanups. Small Things: - Move OpenRISC docs into Documentation and clean them up - Document previously undocumented devicetree bindings - Update the or1ksim dts to use stdout-path OpenRISC SMP support details: - First the "use shadow registers" and "define CPU_BIG_ENDIAN as true" get the architecture ready for SMP. - The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and qrwlocks" add the SMP locking infrastructure as needed. Using the qspinlocks and qrwlocks as suggested by Peter Z while reviewing the original spinlocks implementation. - The "support for ompic" adds a new irqchip device which is used for IPI communication to support SMP. - The "initial SMP support" adds smp.c and makes changes to all of the necessary data-structures to be per-cpu. The remaining patches are bug fixes and debug helpers which I wanted to keep separate from the "initial SMP support" in order to allow them to be reviewed on their own. This includes: - add cacheflush support to fix icache aliasing - fix initial preempt state for secondary cpu tasks - sleep instead of spin on secondary wait - support framepointers and STACKTRACE_SUPPORT - enable LOCKDEP_SUPPORT and irqflags tracing - timer sync: Add tick timer sync logic - fix possible deadlock in timer sync, pointed out by mips guys Note: the irqchip patch was reviewed with Marc and we agreed to push it together with these patches" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: fix possible deadlock scenario during timer sync openrisc: pass endianness info to sparse openrisc: add tick timer multi-core sync logic openrisc: enable LOCKDEP_SUPPORT and irqflags tracing openrisc: support framepointers and STACKTRACE_SUPPORT openrisc: add simple_smp dts and defconfig for simulators openrisc: add cacheflush support to fix icache aliasing openrisc: sleep instead of spin on secondary wait openrisc: fix initial preempt state for secondary cpu tasks openrisc: initial SMP support irqchip: add initial support for ompic dt-bindings: add openrisc to vendor prefixes list openrisc: use qspinlocks and qrwlocks openrisc: add 1 and 2 byte cmpxchg support openrisc: use shadow registers to save regs on exception dt-bindings: openrisc: Add OpenRISC platform SoC Documentation: openrisc: Updates to README Documentation: Move OpenRISC docs out of arch/ MAINTAINERS: Add OpenRISC pic maintainer openrisc: dts: or1ksim: Add stdout-path
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-03openrisc: fix possible deadlock scenario during timer syncStafford Horne
OpenRISC borrows its timer sync logic from MIPS, Matt helped to review the OpenRISC implementation and noted that we may suffer the same deadlock case that MIPS has faced. The case being: "the MIPS timer synchronization code contained the possibility of deadlock. If you mark a CPU online before it goes into the synchronize loop, then the boot CPU can schedule a different thread and send IPIs to all "online" CPUs. It gets stuck waiting for the secondary to ack it's IPI, since this secondary CPU has not enabled IRQs yet, and is stuck waiting for the master to synchronise with it. The system then deadlocks." Fix this by moving set_cpu_online() to after timer sync. Reported-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: pass endianness info to sparseLuc Van Oostenryck
openrisc is big-endian only but sparse assumes the same endianness as the building machine. This is problematic for code which expect __BYTE_ORDER__ being correctly predefined by the compiler which sparse can then pre-process differently from what gcc would, depending on the building machine endianness. Fix this by letting sparse know about the architecture endianness. To: Jonas Bonn <jonas@southpole.se> To: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> To: Stafford Horne <shorne@gmail.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: add tick timer multi-core sync logicStafford Horne
In case timers are not in sync when cpus start (i.e. hot plug / offset resets) we need to synchronize the secondary cpus internal timer with the main cpu. This is needed as in OpenRISC SMP there is only one clocksource registered which reads from the same ttcr register on each cpu. This synchronization routine heavily borrows from mips implementation that does something similar. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: enable LOCKDEP_SUPPORT and irqflags tracingStafford Horne
Lockdep is needed for proving the spinlocks and rwlocks work fine on our platform. It also requires calling the trace_hardirqs_off() and trace_hardirqs_on() pair of routines when entering and exiting an interrupt. For OpenRISC the interrupt stack frame does not support frame pointers, so to call trace_hardirqs_on() and trace_hardirqs_off() here the macro's build up a stack frame each time. There is one necessary small change in _sys_call_handler to move interrupt enabling later so they can get re-enabled during syscall restart. This was done to fix lockdep warnings that are now possible due to this patch. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: support framepointers and STACKTRACE_SUPPORTStafford Horne
For lockdep support a reliable stack trace mechanism is needed. This patch adds support in OpenRISC for the stacktrace framework, implemented by a simple unwinder api. The unwinder api supports both framepointer and basic stack tracing. The unwinder is now used to replace the stack_dump() implementation as well. The new traces are inline with other architectures trace format: Call trace: [<c0004448>] show_stack+0x3c/0x58 [<c031c940>] dump_stack+0xa8/0xe4 [<c0008104>] __cpu_up+0x64/0x130 [<c000d268>] bringup_cpu+0x3c/0x178 [<c000d038>] cpuhp_invoke_callback+0xa8/0x1fc [<c000d680>] cpuhp_up_callbacks+0x44/0x14c [<c000e400>] cpu_up+0x14c/0x1bc [<c041da60>] smp_init+0x104/0x15c [<c033843c>] ? kernel_init+0x0/0x140 [<c0415e04>] kernel_init_freeable+0xbc/0x25c [<c033843c>] ? kernel_init+0x0/0x140 [<c0338458>] kernel_init+0x1c/0x140 [<c003a174>] ? schedule_tail+0x18/0xa0 [<c0006b80>] ret_from_fork+0x1c/0x9c Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: add simple_smp dts and defconfig for simulatorsStefan Kristiansson
Simple enough to be compatible with simulation environments, such as verilated systems, QEMU and other targets supporting OpenRISC SMP. This also supports our base FPGA SoC's if the cpu frequency is upped to 50Mhz. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: Added defconfig] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: add cacheflush support to fix icache aliasingJan Henrik Weinstock
On OpenRISC the icache does not snoop data stores. This can cause aliasing as reported by Jan. This patch fixes the issue to ensure icache is properly synchronized when code is written to memory. It supports both SMP and UP flushing. This supports dcache flush as well for architectures that do not support write-through caches; most OpenRISC implementations do implement write-through cache however. Dcache flushes are done only on a single core as OpenRISC dcaches all support snooping of bus stores. Signed-off-by: Jan Henrik Weinstock <jan.weinstock@ice.rwth-aachen.de> [shorne@gmail.com: Squashed patches and wrote commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: sleep instead of spin on secondary waitStafford Horne
Currently we do a spin on secondary cpus when waiting to boot. This theoretically causes issues with power consumption and does cause issues with qemu cycle burning (it starves cpu 0 from actually being able to boot.) This change puts each secondary cpu to sleep if they have a power management unit, then signals them to wake via IPI when its time to boot. If the cpus have no power management unit they will loop as before. Note: The wakeup IPI requires a special interrupt handler as on secondary cpu's the interrupt infrastructure is not yet established. This interrupt handler is set and reset by updating SPR_EVBAR. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: fix initial preempt state for secondary cpu tasksStafford Horne
During SMP testing we were getting the below warning after booting the secondary cpu: [ 0.060000] BUG: scheduling while atomic: swapper/1/0/0x00000000 This change follows similar patterns from other architectures to start the schduler with preempt disabled. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: initial SMP supportStefan Kristiansson
This patch introduces the SMP support for the OpenRISC architecture. The SMP architecture requires cores which have multi-core features which have been introduced a few years back including: - New SPRS SPR_COREID SPR_NUMCORES - Shadow SPRs - Atomic Instructions - Cache Coherency - A wired in IPI controller This patch adds all of the SMP specific changes to core infrastructure, it looks big but it needs to go all together as its hard to split this one up. Boot loader spinning of second cpu is not supported yet, it's assumed that Linux is booted straight after cpu reset. The bulk of these changes are trivial changes to refactor to use per cpu data structures throughout. The addition of the smp.c and changes in time.c are the changes. Some specific notes: MM changes ---------- The reason why this is created as an array, and not with DEFINE_PER_CPU is that doing it this way, we'll save a load in the tlb-miss handler (the load from __per_cpu_offset). TLB Flush --------- The SMP implementation of flush_tlb_* works by sending out a function-call IPI to all the non-local cpus by using the generic on_each_cpu() function. Currently, all flush_tlb_* functions will result in a flush_tlb_all(), which has always been the behaviour in the UP case. CPU INFO -------- This creates a per cpu cpuinfo struct and fills it out accordingly for each activated cpu. show_cpuinfo is also updated to reflect new version information in later versions of the spec. SMP API ------- This imitates the arm64 implementation by having a smp_cross_call callback that can be set by set_smp_cross_call to initiate an IPI and a handle_IPI function that is expected to be called from an IPI irqchip driver. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: added cpu stop, checkpatch fixes, wrote commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03irqchip: add initial support for ompicStafford Horne
IPI driver for the Open Multi-Processor Interrupt Controller (ompic) as described in the Multi-core support section of the OpenRISC 1.2 architecture specification: https://github.com/openrisc/doc/raw/master/openrisc-arch-1.2-rev0.pdf Each OpenRISC core contains a full interrupt controller which is used in the SMP architecture for interrupt balancing. This IPI device, the ompic, is the only external device required for enabling SMP on OpenRISC. Pending ops are stored in a memory bit mask which can allow multiple pending operations to be set and serviced at a time. This is mostly borrowed from the alpha IPI implementation. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: converted ops to bitmask, wrote commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: use qspinlocks and qrwlocksStafford Horne
Enable OpenRISC to use qspinlocks and qrwlocks for upcoming SMP support. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: add 1 and 2 byte cmpxchg supportStafford Horne
OpenRISC only supports hardware instructions that perform 4 byte atomic operations. For enabling qrwlocks for upcoming SMP support 1 and 2 byte implementations are needed. To do this we leverage the 4 byte atomic operations and shift/mask the 1 and 2 byte areas as needed. This heavily borrows ideas and routines from sh and mips, which do something similar. Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-03openrisc: use shadow registers to save regs on exceptionStefan Kristiansson
Previously, the area between 0x0-0x100 have been used as a "scratch" memory area to temporarily store regs during exception entry. In a multi-core environment, this will not work. This change is to use shadow registers for nested context. Currently only the "critical" temp load/stores are covered, the EMERGENCY_PRINT ones are left as is (when they are used, it's game over anyway), they need to be handled as well in the future. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-02License cleanup: add SPDX license identifier to uapi header files with a licenseGreg Kroah-Hartman
Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30Documentation: Move OpenRISC docs out of arch/Stafford Horne
The OpenRISC docs have traditionally been in arch/ but that does not seem like the correct place to be. Move them so they will be more visible to others. Also update MAINTAINERS to make sure we get notifications of changes. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-10-30openrisc: dts: or1ksim: Add stdout-pathStafford Horne
During reviews of the OpenRISC SMP patch series it was suggested to add stdout-path to the SMP dts file. Add stdout-path to our other dts files to be a good example. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-09-13Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC fixlet from Stafford Horne: "Fix warning for upcoming work to remove linux/vmalloc.h from asm-generic/io.h" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: add forward declaration for struct vm_area_struct
2017-09-11openrisc: add forward declaration for struct vm_area_structTobias Klauser
After removing linux/vmalloc.h from asm-generic/io.h, the following warning occurs on openrisc: In file included from arch/openrisc/include/asm/io.h:33:0, from include/linux/io.h:25, from drivers/tty/serial/earlycon.c:19: arch/openrisc/include/asm/pgtable.h:424:2: warning: 'struct vm_area_struct' declared inside parameter list unsigned long address, pte_t *pte) ^ arch/openrisc/include/asm/pgtable.h:424:2: warning: its scope is only this definition or declaration, which is probably not what you want Reported-by: kbuild test robot <lkp@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-09-08arch: define CPU_BIG_ENDIAN for all fixed big endian archsBabu Moger
Patch series "Define CPU_BIG_ENDIAN or warn for inconsistencies", v3. While working on enabling queued rwlock on SPARC, found this following code in include/asm-generic/qrwlock.h which uses CONFIG_CPU_BIG_ENDIAN to clear a byte. static inline u8 *__qrwlock_write_byte(struct qrwlock *lock) { return (u8 *)lock + 3 * IS_BUILTIN(CONFIG_CPU_BIG_ENDIAN); } Problem is many of the fixed big endian architectures don't define CPU_BIG_ENDIAN and clears the wrong byte. Define CPU_BIG_ENDIAN for all the fixed big endian architecture to fix it. Also found few more references of this config parameter in drivers/of/base.c drivers/of/fdt.c drivers/tty/serial/earlycon.c drivers/tty/serial/serial_core.c Be aware that this may cause regressions if someone has worked-around problems in the above code already. Remove the work-around. Here is our original discussion https://lkml.org/lkml/2017/5/24/620 Link: http://lkml.kernel.org/r/1499358861-179979-2-git-send-email-babu.moger@oracle.com Signed-off-by: Babu Moger <babu.moger@oracle.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Stafford Horne <shorne@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25futex: Remove duplicated code and fix undefined behaviourJiri Slaby
There is code duplicated over all architecture's headers for futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr, and comparison of the result. Remove this duplication and leave up to the arches only the needed assembly which is now in arch_futex_atomic_op_inuser. This effectively distributes the Will Deacon's arm64 fix for undefined behaviour reported by UBSAN to all architectures. The fix was done in commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump. And as suggested by Thomas, check for negative oparg too, because it was also reported to cause undefined behaviour report. Note that s390 removed access_ok check in d12a29703 ("s390/uaccess: remove pointless access_ok() checks") as access_ok there returns true. We introduce it back to the helper for the sake of simplicity (it gets optimized away anyway). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile] Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org> Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64] Cc: linux-mips@linux-mips.org Cc: Rich Felker <dalias@libc.org> Cc: linux-ia64@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: peterz@infradead.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: sparclinux@vger.kernel.org Cc: Jonas Bonn <jonas@southpole.se> Cc: linux-s390@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: linux-hexagon@vger.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-snps-arc@lists.infradead.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-xtensa@linux-xtensa.org Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: openrisc@lists.librecores.org Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Stafford Horne <shorne@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Richard Henderson <rth@twiddle.net> Cc: Chris Zankel <chris@zankel.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-parisc@vger.kernel.org Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-alpha@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
2017-07-11openrisc: move generic-y of exported headers to uapi/asm/KbuildMasahiro Yamada
Since commit fcc8487d477a ("uapi: export all headers under uapi directories"), all (and only) headers under uapi directories are exported, but asm-generic wrappers are still exceptions. To complete de-coupling the uapi from kernel headers, move generic-y of exported headers to uapi/asm/Kbuild. With this change, "make headers_install" will just need to parse uapi/asm/Kbuild to build up exported headers. Also, move "generic-y += kprobes.h" up in order to keep the entries sorted. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stafford Horne <shorne@gmail.com>
2017-07-07Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC updates from Stafford Horne: "Openrisc fixes for this 4.13 merge window, there is not really much here: - include cleanups, one with should reduce build time slightly - switch to new toolchain to new (>2 year old) toolchain prefix" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: defconfig: Cleanup from old Kconfig options openrisc: explicitly include linux/bug.h in asm/fixmap.h openrisc: Switch to use export.h instead of module.h openrisc: Change toolchain from or32- to or1k-
2017-07-08openrisc: defconfig: Cleanup from old Kconfig optionsKrzysztof Kozlowski
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-07-08openrisc: explicitly include linux/bug.h in asm/fixmap.hTobias Klauser
openrisc's asm/fixmap.h uses the BUG() and BUG_ON() macros but relies on implict inclusion of linux/bug.h which means that changes in other headers could break the build. Thus, add an explicit include. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-07-06Merge branch 'uaccess.strlen' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull user access str* updates from Al Viro: "uaccess str...() dead code removal" * 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: s390 keyboard.c: don't open-code strndup_user() mips: get rid of unused __strnlen_user() get rid of unused __strncpy_from_user() instances kill strlen_user()
2017-07-06Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping infrastructure from Christoph Hellwig: "This is the first pull request for the new dma-mapping subsystem In this new subsystem we'll try to properly maintain all the generic code related to dma-mapping, and will further consolidate arch code into common helpers. This pull request contains: - removal of the DMA_ERROR_CODE macro, replacing it with calls to ->mapping_error so that the dma_map_ops instances are more self contained and can be shared across architectures (me) - removal of the ->set_dma_mask method, which duplicates the ->dma_capable one in terms of functionality, but requires more duplicate code. - various updates for the coherent dma pool and related arm code (Vladimir) - various smaller cleanups (me)" * tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits) ARM: dma-mapping: Remove traces of NOMMU code ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus ARM: NOMMU: Introduce dma operations for noMMU drivers: dma-mapping: allow dma_common_mmap() for NOMMU drivers: dma-coherent: Introduce default DMA pool drivers: dma-coherent: Account dma_pfn_offset when used with device tree dma: Take into account dma_pfn_offset dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs dma-mapping: remove dmam_free_noncoherent crypto: qat - avoid an uninitialized variable warning au1100fb: remove a bogus dma_free_nonconsistent call MAINTAINERS: add entry for dma mapping helpers powerpc: merge __dma_set_mask into dma_set_mask dma-mapping: remove the set_dma_mask method powerpc/cell: use the dma_supported method for ops switching powerpc/cell: clean up fixed mapping dma_ops initialization tile: remove dma_supported and mapping_error methods xen-swiotlb: remove xen_swiotlb_set_dma_mask arm: implement ->dma_supported instead of ->set_dma_mask mips/loongson64: implement ->dma_supported instead of ->set_dma_mask ...
2017-07-03Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timers/timekeeping: - compat syscall consolidation (Al Viro) - Posix timer consolidation (Christoph Helwig / Thomas Gleixner) - Cleanup of the device tree based initialization for clockevents and clocksources (Daniel Lezcano) - Consolidation of the FTTMR010 clocksource/event driver (Linus Walleij) - The usual set of small fixes and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits) timers: Make the cpu base lock raw clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()' clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap clocksource/drivers/tcb_clksrc: Make IO endian agnostic clocksource/drivers/sun4i: Switch to the timer-of common init clocksource/drivers/timer-of: Fix invalid iomap check Revert "ktime: Simplify ktime_compare implementation" clocksource/drivers: Fix uninitialized variable use in timer_of_init kselftests: timers: Add test for frequency step kselftests: timers: Fix inconsistency-check to not ignore first timestamp time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD time: Clean up CLOCK_MONOTONIC_RAW time handling posix-cpu-timers: Make timespec to nsec conversion safe itimer: Make timeval to nsec conversion range limited timers: Fix parameter description of try_to_del_timer_sync() ktime: Simplify ktime_compare implementation clocksource/drivers/fttmr010: Factor out clock read code clocksource/drivers/fttmr010: Implement delay timer clocksource/drivers: Add timer-of common init routine clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume ...
2017-06-28arch: remove unused macro/function thread_saved_pc()Tobias Klauser
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-28openrisc: remove arch-specific dma_supported implementationChristoph Hellwig
This implementation is simply bogus - openrisc only has a simple direct mapped DMA implementation and thus doesn't care about the address. Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-20openrisc: remove DMA_ERROR_CODEChristoph Hellwig
openrisc does not return errors for dma_map_page. Signed-off-by: Christoph Hellwig <hch@lst.de>