summaryrefslogtreecommitdiff
path: root/arch/powerpc/Makefile
AgeCommit message (Collapse)Author
2020-04-01powerpc: Suppress .eh_frame generationNaveen N. Rao
GCC v8 defaults to enabling -fasynchronous-unwind-tables due to https://gcc.gnu.org/r259298, which results in .eh_frame section being generated. This results in additional disk usage by the build, as well as the kernel modules. Since the kernel has no use for this, this section is discarded. Add -fno-asynchronous-unwind-tables to KBUILD_CFLAGS to suppress generation of .eh_frame section. Note that our VDSOs need .eh_frame, but are not affected by this change since our VDSO code are all in assembly. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1ed7cd84a7d1a3180b30c0c60e70eed8bb8b40c3.1583415544.git.naveen.n.rao@linux.vnet.ibm.com
2020-04-01powerpc: Drop -fno-dwarf2-cfi-asmNaveen N. Rao
The original commit/discussion adding -fno-dwarf2-cfi-asm refers to R_PPC64_REL32 relocations not being handled by our module loader: http://lkml.kernel.org/r/20090224065112.GA6690@bombadil.infradead.org However, that is now handled thanks to commit 9f751b82b491d ("powerpc/module: Add support for R_PPC64_REL32 relocations"). So, drop this flag from our Makefile. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9b22a064de6eb1301d92177eb3a38559df7005d3.1583415544.git.naveen.n.rao@linux.vnet.ibm.com
2020-03-04powerpc/Makefile: Mark phony targets as PHONYMichael Ellerman
Some of our phony targets are not marked as such. This can lead to confusing errors, eg: $ make clean $ touch install $ make install make: 'install' is up to date. $ Fix it by adding them to the PHONY variable which is marked phony in the top-level Makefile, or in scripts/Makefile.build for the boot Makefile. Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200219000434.15872-1-mpe@ellerman.id.au
2019-11-25powerpc: Don't add -mabi= flags when building with ClangNathan Chancellor
When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [mpe: Trim clang links in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
2019-10-28powerpc/configs: Rename foo_basic_defconfig to foo_base.configMichael Ellerman
We have several "defconfigs" that are not actually full defconfigs they are just a base set of options which are then merged with other fragments to produce a working defconfig. The most obvious example is corenet_basic_defconfig which only contains one symbol CONFIG_CORENET_GENERIC=y. And in fact if you build it as a "defconfig" that one symbol ends up undefined, because its prerequisites are missing. There is also mpc85xx_base_defconfig which doesn't actually enable CONFIG_PPC_85xx. To avoid confusion, rename these config fragments to "foo_base.config" to make it clearer that they are not full defconfigs and are instaed just fragments that are used to generate real defconfigs. Reported-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190528081614.26096-1-mpe@ellerman.id.au
2019-09-20Merge tag 'powerpc-5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This is a bit late, partly due to me travelling, and partly due to a power outage knocking out some of my test systems *while* I was travelling. - Initial support for running on a system with an Ultravisor, which is software that runs below the hypervisor and protects guests against some attacks by the hypervisor. - Support for building the kernel to run as a "Secure Virtual Machine", ie. as a guest capable of running on a system with an Ultravisor. - Some changes to our DMA code on bare metal, to allow devices with medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space. - Support for firmware assisted crash dumps on bare metal (powernv). - Two series fixing bugs in and refactoring our PCI EEH code. - A large series refactoring our exception entry code to use gas macros, both to make it more readable and also enable some future optimisations. As well as many cleanups and other minor features & fixups. Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar, Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde" * tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits) powerpc/mm/mce: Keep irqs disabled during lockless page table walk powerpc: Use ftrace_graph_ret_addr() when unwinding powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR ftrace: Look up the address of return_to_handler() using helpers powerpc: dump kernel log before carrying out fadump or kdump docs: powerpc: Add missing documentation reference powerpc/xmon: Fix output of XIVE IPI powerpc/xmon: Improve output of XIVE interrupts powerpc/mm/radix: remove useless kernel messages powerpc/fadump: support holes in kernel boot memory area powerpc/fadump: remove RMA_START and RMA_END macros powerpc/fadump: update documentation about option to release opalcore powerpc/fadump: consider f/w load area powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel powerpc/fadump: improve how crashed kernel's memory is reserved powerpc/fadump: consider reserved ranges while releasing memory powerpc/fadump: make crash memory ranges array allocation generic ...
2019-09-20Merge tag 'kbuild-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ...
2019-08-22powerpc: remove meaningless KBUILD_ARFLAGS additionMasahiro Yamada
The KBUILD_ARFLAGS addition in arch/powerpc/Makefile has never worked in a useful way because it is always overridden by the following code in the top Makefile: # use the deterministic mode of AR if available KBUILD_ARFLAGS := $(call ar-option,D) The code in the top Makefile was added in 2011, by commit 40df759e2b9e ("kbuild: Fix build with binutils <= 2.19"). The KBUILD_ARFLAGS addition for ppc has always been dead code from the beginning. Nobody has reported a problem since 43c9127d94d6 ("powerpc: Add option to use thin archives"), so this code was unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190713032106.8509-1-yamada.masahiro@socionext.com
2019-08-21kbuild: rebuild modules when module linker scripts are updatedMasahiro Yamada
Currently, the timestamp of module linker scripts are not checked. Add them to the dependency of modules so they are correctly rebuilt. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-20powerpc/Makefile: Always pass --synthetic to nm if supportedMichael Ellerman
Back in 2004 we added logic to arch/ppc64/Makefile to pass the --synthetic option to nm, if it was supported by nm. Then in 2005 when arch/ppc64 and arch/ppc were merged, the logic to add --synthetic was moved inside an #ifdef CONFIG_PPC64 block within arch/powerpc/Makefile, and has remained there since. That was fine, though crufty, until recently when a change to init/Kconfig added a config time check that uses $(NM). On powerpc that leads to an infinite loop because Kconfig uses $(NM) to calculate some values, then the powerpc Makefile changes $(NM), which Kconfig notices and restarts. The original commit that added --synthetic simply said: On new toolchains we need to use nm --synthetic or we miss code symbols. And the nm man page says that the --synthetic option causes nm to: Include synthetic symbols in the output. These are special symbols created by the linker for various purposes. So it seems safe to always pass --synthetic if nm supports it, ie. on 32-bit and 64-bit, it just means 32-bit kernels might have more symbols reported (and in practice I see no extra symbols). Making it unconditional avoids the #ifdef CONFIG_PPC64, which in turn avoids the infinite loop. Debugged-by: Peter Collingbourne <pcc@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Will Deacon <will@kernel.org>
2019-05-18treewide: prefix header search paths with $(srctree)/Masahiro Yamada
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-20powerpc: vdso: Make vdso32 installation conditional in vdso_installBen Hutchings
The 32-bit vDSO is not needed and not normally built for 64-bit little-endian configurations. However, the vdso_install target still builds and installs it. Add the same config condition as is normally used for the build. Fixes: e0d005916994 ("powerpc/vdso: Disable building the 32-bit VDSO ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-20powerpc: Fix defconfig choice logic when cross compilingMichael Ellerman
Our logic for choosing defconfig doesn't work well in some situations. For example if you're on a ppc64le machine but you specify a non-empty CROSS_COMPILE, in order to use a non-default toolchain, then defconfig will give you ppc64_defconfig (big endian): $ make CROSS_COMPILE=~/toolchains/gcc-8/bin/powerpc-linux- defconfig *** Default configuration is based on 'ppc64_defconfig' This is because we assume that CROSS_COMPILE being set means we can't be on a ppc machine and rather than checking we just default to ppc64_defconfig. We should just ignore CROSS_COMPILE, instead check the machine with uname and if it's one of ppc, ppc64 or ppc64le then use that defconfig. If it's none of those then we fall back to ppc64_defconfig. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-20powerpc/32: Add ppc_defconfigMichael Ellerman
Add a generic 32-bit defconfig called ppc_defconfig. This means we'll have a defconfig matching "uname -m" for all cases. This config is mostly intended for build testing but if someone wants to tweak it to get it booting on something that would be fine too. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPUChristophe Leroy
Now that thread_info is similar to task_struct, its address is in r2 so CURRENT_THREAD_INFO() macro is useless. This patch removes it. This patch also moves the 'tovirt(r2, r2)' down just before the reactivation of MMU translation, so that we keep the physical address of 'current' in r2 until then. It avoids a few calls to tophys(). At the same time, as the 'cpu' field is not anymore in thread_info, TI_CPU is renamed TASK_CPU by this patch. It also allows to get rid of a couple of '#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE' as ACCOUNT_CPU_USER_ENTRY() and ACCOUNT_CPU_USER_EXIT() are empty when CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not defined. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Fix a missed conversion of TI_CPU idle_6xx.S] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc: Activate CONFIG_THREAD_INFO_IN_TASKChristophe Leroy
This patch activates CONFIG_THREAD_INFO_IN_TASK which moves the thread_info into task_struct. Moving thread_info into task_struct has the following advantages: - It protects thread_info from corruption in the case of stack overflows. - Its address is harder to determine if stack addresses are leaked, making a number of attacks more difficult. This has the following consequences: - thread_info is now located at the beginning of task_struct. - The 'cpu' field is now in task_struct, and only exists when CONFIG_SMP is active. - thread_info doesn't have anymore the 'task' field. This patch: - Removes all recopy of thread_info struct when the stack changes. - Changes the CURRENT_THREAD_INFO() macro to point to current. - Selects CONFIG_THREAD_INFO_IN_TASK. - Modifies raw_smp_processor_id() to get ->cpu from current without including linux/sched.h to avoid circular inclusion and without including asm/asm-offsets.h to avoid symbol names duplication between ASM constants and C constants. - Modifies klp_init_thread_info() to take a task_struct pointer argument. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Add task_stack.h to livepatch.h to fix build fails] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-14powerpc: remove redundant header search path additionsMasahiro Yamada
The same path -Iarch/$(ARCH) is passed to KBUILD_CPPFLAGS, KBUILD_AFLAGS, and KBUILD_CFLAGS. As you see in scripts/Makefile.lib, KBUILD_CPPFLAGS is passed to c_flags and a_flags as well. Passing it to KBUILD_CPPFLAGS is enough. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-27Merge tag 'powerpc-4.21-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Mitigations for Spectre v2 on some Freescale (NXP) CPUs. - A large series adding support for pass-through of Nvidia V100 GPUs to guests on Power9. - Another large series to enable hardware assistance for TLB table walk on MPC8xx CPUs. - Some preparatory changes to our DMA code, to make way for further cleanups from Christoph. - Several fixes for our Transactional Memory handling discovered by fuzzing the signal return path. - Support for generating our system call table(s) from a text file like other architectures. - A fix to our page fault handler so that instead of generating a WARN_ON_ONCE, user accesses of kernel addresses instead print a ratelimited and appropriately scary warning. - A cosmetic change to make our unhandled page fault messages more similar to other arches and also more compact and informative. - Freescale updates from Scott: "Highlights include elimination of legacy clock bindings use from dts files, an 83xx watchdog handler, fixes to old dts interrupt errors, and some minor cleanup." And many clean-ups, reworks and minor fixes etc. Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing" * tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits) Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask" powerpc/zImage: Also check for stdout-path powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y macintosh: Use of_node_name_{eq, prefix} for node name comparisons ide: Use of_node_name_eq for node name comparisons powerpc: Use of_node_name_eq for node name comparisons powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name powerpc/mm: Remove very old comment in hash-4k.h powerpc/pseries: Fix node leak in update_lmb_associativity_index() powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL powerpc/dts/fsl: Fix dtc-flagged interrupt errors clk: qoriq: add more compatibles strings powerpc/fsl: Use new clockgen binding powerpc/83xx: handle machine check caused by watchdog timer powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved" powerpc/fsl_pci: simplify fsl_pci_dma_set_mask arch/powerpc/fsl_rmu: Use dma_zalloc_coherent vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver vfio_pci: Allow regions to add own capabilities vfio_pci: Allow mapping extra regions ...
2018-12-21powerpc: generate uapi header and system call table filesFiroz Khan
System call table generation script must be run to gener- ate unistd_32/64.h and syscall_table_32/64/c32/spu.h files. This patch will have changes which will invokes the script. This patch will generate unistd_32/64.h and syscall_table- _32/64/c32/spu.h files by the syscall table generation script invoked by parisc/Makefile and the generated files against the removed files must be identical. The generated uapi header file will be included in uapi/- asm/unistd.h and generated system call table header file will be included by kernel/systbl.S file. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/32: Avoid unsupported flags with clangJoel Stanley
When building for ppc32 with clang these flags are unsupported: -ffixed-r2 and -mmultiple llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on when building for SVR4ABI and !ppc64: // The SVR4 ABI reserves r2 and r13 if (Subtarget.isSVR4ABI()) { // We only reserve r2 if we need to use the TOC pointer. If we have no // explicit uses of the TOC pointer (meaning we're a leaf function with // no constant-pool loads, etc.) and we have no potential uses inside an // inline asm block, then we can treat r2 has an ordinary callee-saved // register. const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm()) markSuperRegs(Reserved, PPC::R2); // System-reserved register markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register } This means we can safely omit -ffixed-r2 when building for 32-bit targets. The -mmultiple/-mno-multiple flags are not supported by clang, so platforms that might support multiple miss out on using multiple word instructions. We wrap these flags in cc-option so that when Clang gains support the kernel will be able use these flags. Clang 8 can then build a ppc44x_defconfig which boots in Qemu: make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- qemu-system-ppc -M bamboo \ -kernel arch/powerpc/boot/zImage \ -dtb arch/powerpc/boot/dts/bamboo.dtb \ -initrd ~/ppc32-440-rootfs.cpio \ -nographic -serial stdio -monitor pty -append "console=ttyS0" Link: https://github.com/ClangBuiltLinux/linux/issues/261 Link: https://bugs.llvm.org/show_bug.cgi?id=39556 Link: https://bugs.llvm.org/show_bug.cgi?id=39555 Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-17powerpc/32: Move the old 6xx -mcpu logic before the TARGET_CPU logicMathieu Malaterre
The code: ifdef CONFIG_6xx KBUILD_CFLAGS += -mcpu=powerpc endif was added in 2006 in commit f48b8296b315 ("[PATCH] powerpc32: Set cpu explicitly in kernel compiles"). This change was acceptable since the TARGET_CPU logic was 64-bit only. Since commit 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32") this logic is no longer acceptable after the TARGET_CPU specific. It currently appends -mcpu=powerpc at the end of the command line, after any TARGET_CPU specific: gcc -Wp,-MD,init/.do_mounts.o.d ... -mcpu=powerpc -mbig-endian -m32 ... -mcpu=e300c2 ... -mcpu=powerpc ... ../init/do_mounts.c Fixes: 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32") Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-09x86, powerpc: Remove -funit-at-a-time compiler option entirelyMasahiro Yamada
GCC 4.6 manual says: -funit-at-a-time This option is left for compatibility reasons. -funit-at-a-time has no effect, while -fno-unit-at-a-time implies -fno-toplevel-reorder and -fno-section-anchors. Enabled by default. Remove it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Weinberger <richard@sigma-star.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1541990120-9643-3-git-send-email-yamada.masahiro@socionext.com
2018-11-26powerpc: change CONFIG_6xx to CONFIG_PPC_BOOK3S_32Christophe Leroy
Today we have: config PPC_BOOK3S_32 bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" [depends on PPC32 within a choice] config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config 6xx def_bool y depends on PPC32 && PPC_BOOK3S 6xx is therefore redundant with PPC_BOOK3S_32. In order to make the code clearer, lets use preferably PPC_BOOK3S_32. This will allow to remove CONFIG_6xx in a later patch. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-26powerpc/configs: Add KVM guest defconfigSatheesh Rajendran
This patch adds new defconfig options for powerpc KVM guest and guest.config with additional config symbols enabled, which is to build kernel to boot without initramfs and can be used as place holder for guest specific additional config symbols in future. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-02kbuild: replace cc-name test with CONFIG_CC_IS_CLANGMasahiro Yamada
Evaluating cc-name invokes the compiler every time even when you are not compiling anything, like 'make help'. This is not efficient. The compiler type has been already detected in the Kconfig stage. Use CONFIG_CC_IS_CLANG, instead. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Paul Burton <paul.burton@mips.com> (MIPS) Acked-by: Joel Stanley <joel@jms.id.au>
2018-10-26Merge tag 'powerpc-4.20-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A large series to rewrite our SLB miss handling, replacing a lot of fairly complicated asm with much fewer lines of C. - Following on from that, we now maintain a cache of SLB entries for each process and preload them on context switch. Leading to a 27% speedup for our context switch benchmark on Power9. - Improvements to our handling of SLB multi-hit errors. We now print more debug information when they occur, and try to continue running by flushing the SLB and reloading, rather than treating them as fatal. - Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9). - Add support for physical memory up to 2PB in the linear mapping on 64-bit Book3S. We only support up to 512TB as regular system memory, otherwise the percpu allocator runs out of vmalloc space. - Add stack protector support for 32 and 64-bit, with a per-task canary. - Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP. - Support recognising "big cores" on Power9, where two SMT4 cores are presented to us as a single SMT8 core. - A large series to cleanup some of our ioremap handling and PTE flags. - Add a driver for the PAPR SCM (storage class memory) interface, allowing guests to operate on SCM devices (acked by Dan). - Changes to our ftrace code to handle very large kernels, where we need to use a trampoline to get to ftrace_caller(). And many other smaller enhancements and cleanups. Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao, Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab, Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang" * tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits) Revert "selftests/powerpc: Fix out-of-tree build errors" powerpc/msi: Fix compile error on mpc83xx powerpc: Fix stack protector crashes on CPU hotplug powerpc/traps: restore recoverability of machine_check interrupts powerpc/64/module: REL32 relocation range check powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd selftests/powerpc: Add a test of wild bctr powerpc/mm: Fix page table dump to work on Radix powerpc/mm/radix: Display if mappings are exec or not powerpc/mm/radix: Simplify split mapping logic powerpc/mm/radix: Remove the retry in the split mapping logic powerpc/mm/radix: Fix small page at boundary when splitting powerpc/mm/radix: Fix overuse of small pages in splitting logic powerpc/mm/radix: Fix off-by-one in split mapping logic powerpc/ftrace: Handle large kernel configs powerpc/mm: Fix WARN_ON with THP NUMA migration selftests/powerpc: Fix out-of-tree build errors powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64 powerpc/time: isolate scaled cputime accounting in dedicated functions. ...
2018-10-19powerpc: Move core kernel logic into arch/powerpc/KbuildMichael Ellerman
This is a nice cleanup, arch/powerpc/Makefile is long and messy so moving this out helps a little. It also allows us to do: $ make arch/powerpc Which can be helpful if you just want to compile test some changes to arch code and not link everything. Finally it also gives us a single place to do subdir-cc-flags assignments which affect the whole of arch/powerpc, which we will do in a future patch. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-13powerpc/Makefile: Fix PPC_BOOK3S_64 ASFLAGSJoel Stanley
Ever since commit 15a3204d24a3 ("powerpc/64s: Set assembler machine type to POWER4") we force -mpower4 to be passed to the assembler irrespective of the CFLAGS used (for Book3s 64). When building a powerpc64 kernel with clang, clang will not add -many to the assembler flags, so any instructions that the compiler has generated that are not available on power4 will cause an error: /usr/bin/as -a64 -mppc64 -mlittle-endian -mpower8 \ -I ./arch/powerpc/include -I ./arch/powerpc/include/generated \ -I ./include -I ./arch/powerpc/include/uapi \ -I ./arch/powerpc/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc \ -maltivec -mpower4 -o init/do_mounts.o /tmp/do_mounts-3b0a3d.s /tmp/do_mounts-51ce54.s:748: Error: unrecognized opcode: `isel' GCC does include -many, so the GCC driven gas call will succeed: as -v -I ./arch/powerpc/include -I ./arch/powerpc/include/generated -I ./include -I ./arch/powerpc/include/uapi -I ./arch/powerpc/include/generated/uapi -I ./include/uapi -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc -a64 -mpower8 -many -mlittle -maltivec -mpower4 -o init/do_mounts.o Note that isel is power7 and above for IBM CPUs. GCC only generates it for Power9 and above, but the above test was run against the clang generated assembly. Peter Bergner explains: When using -many -mpower4, gas will first try and find a matching power4 mnemonic and failing that, it will then allow any valid mnemonic that gas knows about. GCC's use of -many predates me though. IIRC, Alan looked at trying to remove it, but I forget why he didn't. Could be either a gcc or gas issue at the time. I'm not sure whether issue still exists or not. He and I have modified how gas works internally a fair amount since he tried removing gcc use of -many. I will also note that when using -many, gas will choose the first mnemonic that matches in the mnemonic table and we have (mostly) sorted the table so that server mnemonics show up earlier in the table than other mnemonics, so they'll be seen/chosen first. By explicitly setting -many we can build with Clang and GCC while retaining the -mpower4 option. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-04powerpc: remove leftover code of old GCC version checksMasahiro Yamada
Clean up the leftover of commit f2910f0e6835 ("powerpc: remove old GCC version checks"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03powerpc/64: add stack protector supportChristophe Leroy
On PPC64, as register r13 points to the paca_struct at all time, this patch adds a copy of the canary there, which is copied at task_switch. That new canary is then used by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r13 -mstack-protector-guard-offset=offsetof(struct paca_struct, canary)) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03powerpc/32: add stack protector supportChristophe Leroy
This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-02kbuild: consolidate Devicetree dtb build rulesRob Herring
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Paul Burton <paul.burton@mips.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-02powerpc: build .dtb files in dts directoryRob Herring
Align powerpc with other architectures which build the dtb files in the same directory as the dts files. This is also in line with most other build targets which are located in the same directory as the source. This move will help enable the 'dtbs' target which builds all the dtbs regardless of kernel config. This transition could break some scripts if they expect dtb files in the old location. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-19powerpc: avoid -mno-sched-epilog on GCC 4.9 and newerNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-19powerpc: consolidate -mno-sched-epilog into FTRACE flagsNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-19powerpc: remove old GCC version checksNicholas Piggin
GCC 4.6 is the minimum supported now. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-24kbuild: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13Merge branch 'fixes' into nextMichael Ellerman
Merge our fixes branch from the 4.18 cycle to resolve some minor conflicts.
2018-08-08powerpc: Make CPU selection logic generic in MakefileChristophe Leroy
At the time being, when adding a new CPU for selection, both Kconfig.cputype and Makefile have to be modified. This patch moves into Kconfig.cputype the name of the CPU to me passed to the -mcpu= argument. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Rename the option to TARGET_CPU to echo the gcc documentation] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-08powerpc/Makefiles: Convert ifeq to ifdef where possibleRodrigo R. Galvao
In Makefiles if we're testing a CONFIG_FOO symbol for equality with 'y' we can instead just use ifdef. The latter reads easily, so convert to it where possible. Signed-off-by: Rodrigo R. Galvao <rosattig@linux.vnet.ibm.com> Reviewed-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-24powerpc: Add ppc64le and ppc64_book3e allmodconfig targetsMichael Ellerman
Similarly as we just did for 32-bit, add phony targets for generating a little endian and Book3E allmodconfig. These aren't covered by the regular allmodconfig, which is big endian and Book3S due to the way the Kconfig symbols are structured. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-24powerpc: Add ppc32_allmodconfig defconfig targetMichael Ellerman
Because the allmodconfig logic just sets every symbol to M or Y, it has the effect of always generating a 64-bit config, because CONFIG_PPC64 becomes Y. So to make it easier for folks to test 32-bit code, provide a phony defconfig target that generates a 32-bit allmodconfig. The 32-bit port has several mutually exclusive CPU types, we choose the Book3S variants as that's what the help text in Kconfig says is most common. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-18powerpc/Makefile: Assemble with -me500 when building for E500James Clarke
Some of the assembly files use instructions specific to BookE or E500, which are rejected with the now-default -mcpu=powerpc, so we must pass -me500 to the assembler just as we pass -me200 for E200. Fixes: 4bf4f42a2feb ("powerpc/kbuild: Set default generic machine type for 32-bit compile") Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-19powerpc/e500mc: Set assembler machine type to e500mcMichael Jeanson
In binutils 2.26 a new opcode for the "wait" instruction was added for the POWER9 and has precedence over the one specific to the e500mc. Commit ebf714ff3756 ("powerpc/e500mc: Add support for the wait instruction in e500_idle") uses this instruction specifically on the e500mc to work around an erratum. This results in an invalid instruction in idle_e500 when we build for the e500mc on bintutils >= 2.26 with the default assembler machine type. Since multiplatform between e500 and non-e500 is not supported, set the assembler machine type globaly when CONFIG_PPC_E500MC=y. Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Kumar Gala <galak@kernel.crashing.org> CC: Vakul Garg <vakul.garg@nxp.com> CC: Scott Wood <swood@redhat.com> CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: linuxppc-dev@lists.ozlabs.org CC: linux-kernel@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-11powerpc/kbuild: move -mprofile-kernel check to KconfigNicholas Piggin
This eliminates the workaround that requires disabling -mprofile-kernel by default in Kconfig. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-04powerpc/Makefile: set -mcpu=860 flag for the 8xxChristophe Leroy
When compiled with GCC 8.1, vmlinux is significantly bigger than with GCC 4.8. When looking at the generated code with objdump, we notice that all functions and loops when a 16 bytes alignment. This significantly increases the size of the kernel. It is pointless and even counterproductive as on the 8xx 'nop' also consumes one clock cycle. Size of vmlinux with GCC 4.8: text data bss dec hex filename 5801948 1626076 457796 7885820 7853fc vmlinux Size of vmlinux with GCC 8.1: text data bss dec hex filename 6764592 1630652 456476 8851720 871108 vmlinux Size of vmlinux with GCC 8.1 and this patch: text data bss dec hex filename 6331544 1631756 456476 8419776 8079c0 vmlinux Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-01powerpc/kbuild: Use flags variables rather than overriding LD/CC/ASNicholas Piggin
The powerpc toolchain can compile combinations of 32/64 bit and big/little endian, so it's convenient to consider, e.g., `CC -m64 -mbig-endian` To be the C compiler for the purpose of invoking it to build target artifacts. So overriding the CC variable to include these flags works for this purpose. Unfortunately that is not compatible with the way the proposed new Kconfig macro language will work. After previous patches in this series, these flags can be carefully passed in using flags instead. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-01powerpc/kbuild: Remove CROSS32 defines from top level powerpc MakefileNicholas Piggin
Switch VDSO32 build over to use CROSS32_COMPILE directly, and have it pass in -m32 after the standard c_flags. This allows endianness overrides to be removed and the endian and bitness flags moved into standard flags variables. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-01powerpc/kbuild: Set default generic machine type for 32-bit compileNicholas Piggin
Some 64-bit toolchains uses the wrong ISA variant for compiling 32-bit kernels, even with -m32. Debian's powerpc64le is one such case, and that is because it is built with --with-cpu=power8. So when cross compiling a 32-bit kernel with a 64-bit toolchain, set -mcpu=powerpc initially, which is the generic 32-bit powerpc machine type and scheduling model. CPU and platform code can override this with subsequent -mcpu flags if necessary. This is not done for 32-bit toolchains otherwise it would override their defaults, which are presumably set appropriately for the environment (moreso than a 64-bit cross compiler). This fixes a lot of build failures due to incompatible assembly when compiling 32-bit kernel with the Debian powerpc64le 64-bit toolchain. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-01powerpc/64s: Add POWER9 CPU type selectionNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>