summaryrefslogtreecommitdiff
path: root/arch/powerpc/configs/g5_defconfig
AgeCommit message (Collapse)Author
2023-09-19powerpc/configs: Remove ReiserFS from defconfigPeter Lafreniere
ReiserFS has been deprecated for a year and a half, yet is still built as part of a defconfig kernel. According to commit eb103a51640e ("reiserfs: Deprecate reiserfs"), the filesystem is slated to be removed in 2025. Remove it from the defconfig profiles now, as part of its deprecation process. Signed-off-by: Peter Lafreniere <peter@n8pjl.ca> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230918175529.19011-3-peter@n8pjl.ca
2022-09-30powerpc/configs: Update config files for removed/renamed symbolsLukas Bulwahn
Clean up config files by: - removing configs that were deleted in the past - removing configs not in tree and without recently pending patches - adding new configs that are replacements for old configs in the file For some detailed information, see: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Renamed: - CONFIG_PPC_PTDUMP -> CONFIG_GENERIC_PTDUMP e084728393a5 ("powerpc/ptdump: Convert powerpc to GENERIC_PTDUMP") Removed: - CONFIG_BLK_DEV_CRYPTOLOOP 47e9624616c8 ("block: remove support for cryptoloop and the xor transfer") - CONFIG_CRYPTO_RMD128 b21b9a5e0aef ("crypto: rmd128 - remove RIPE-MD 128 hash algorithm") - CONFIG_CRYPTO_RMD256 c15d4167f0b0 ("crypto: rmd256 - remove RIPE-MD 256 hash algorithm") - CONFIG_CRYPTO_RMD320 93f64202926f ("crypto: rmd320 - remove RIPE-MD 320 hash algorithm") - CONFIG_CRYPTO_SALSA20 663f63ee6d9c ("crypto: salsa20 - remove Salsa20 stream cipher algorithm") - CONFIG_CRYPTO_TGR192 87cd723f8978 ("crypto: tgr192 - remove Tiger 128/160/192 hash algorithms") - CONFIG_HARDENED_USERCOPY_PAGESPAN 1109a5d90701 ("usercopy: Remove HARDENED_USERCOPY_PAGESPAN") - CONFIG_RAPIDIO_TSI568, CONFIG_RAPIDIO_TSI57X 612d4904191f ("rapidio: remove not used code about RIO_VID_TUNDRA") - CONFIG_RAW_DRIVER 603e4922f1c8 ("remove the raw driver") - CONFIG_ROCKETPORT 3b00b6af7a5b ("tty: rocket, remove the driver") - CONFIG_ENABLE_MUST_CHECK 196793946264 ("Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> [mpe: Add documentation of relevant commit for each symbol change] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220929101502.32527-1-lukas.bulwahn@gmail.com
2021-10-27powerpc/64s: Default to 64K pages for 64 bit book3sJoel Stanley
For 64-bit book3s the default should be 64K as that's what modern CPUs are designed for. The following defconfigs already set CONFIG_PPC_64K_PAGES: cell_defconfig pasemi_defconfig powernv_defconfig ppc64_defconfig pseries_defconfig skiroot_defconfig The have the option removed from the defconfig, as it is now the default. The defconfigs that now need to set CONFIG_PPC_4K_PAGES to maintain their existing behaviour are: g5_defconfig maple_defconfig microwatt_defconfig ps3_defconfig Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> BugLink: https://github.com/linuxppc/issues/issues/109 Link: https://lore.kernel.org/r/20211015001649.45591-1-joel@jms.id.au
2021-01-29arch: powerpc: Stop building and using oprofileViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. This commits stops building oprofile for powerpc and removes any reference to it from directories in arch/powerpc/ apart from arch/powerpc/oprofile, which will be removed in the next commit (this is broken into two commits as the size of the commit became very big, ~5k lines). Note that the member "oprofile_cpu_type" in "struct cpu_spec" isn't removed as it was also used by other parts of the code. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2020-11-04USB: serial: keyspan_pda: clean up xircom/entrega supportJohan Hovold
Drop the separate Kconfig symbol for Xircom / Entrega and always include support in the keyspan_pda driver. Note that all configs that enabled CONFIG_USB_SERIAL_XIRCOM also enable CONFIG_USB_SERIAL_KEYSPAN_PDA. Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-29powerpc/configs: Remove dead symbolsMichael Ellerman
Remove references to symbols that no longer exist as reported by scripts/checkkconfigsymbols.py. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-2-mpe@ellerman.id.au
2020-02-24scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabledDiego Elio Pettenò
This kernel configuration is basically enabling/disabling sr driver quirks detection. While these quirks are for fairly rare devices (very old CD burners, and a glucometer), the additional detection of these models is a very minimal amount of code. The logic behind the quirks is always built into the sr driver. This also removes the config from all the defconfig files that are enabling this already. Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-04powerpc/configs: Disable latencytopAnton Blanchard
latencytop adds almost 4kB to each and every task struct and as such it doesn't deserve to be in our defconfigs. Signed-off-by: Anton Blanchard <anton@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc/configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/configs: Don't enable PPC_EARLY_DEBUG in defconfigsMichael Ellerman
This reverts the remains of commit b9ef7d6b11c1 ("powerpc: Update default configurations"). That commit was proceeded by a commit which added a config option to control use of BOOTX for early debug, ie. PPC_EARLY_DEBUG_BOOTX, and then the update of the defconfigs was intended to not change behaviour by then enabling the new config option. However enabling PPC_EARLY_DEBUG had other consequences, notably causing us to register the udbg console at the end of udbg_early_init(). This means on a system which doesn't have anything that BOOTX can use (most systems), we register the udbg console very early but the bootx code just throws everything away, meaning early boot messages are never printed to the console. What we want to happen is for the udbg console to only be registered later (from setup_arch()) once we've setup udbg_putc, and then all early boot messages will be replayed. Fixes: b9ef7d6b11c1 ("powerpc: Update default configurations") Reported-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03powerpc/config: Enable CONFIG_PRINTK_TIMEPetr Vorel
for 64bit configs which use for CONFIG_LOG_BUF_SHIFT the same or higher value than the default (currently 17). Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-25USB: serial: keyspan: Drop firmware Kconfig optionsBenjamin Gilbert
The USB_SERIAL_KEYSPAN_* firmware options no longer do anything. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware") Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20powerpc/configs: Update for CONFIG_SND changesMichael Ellerman
Commit eb3b705aaed9 ("ALSA: Make CONFIG_SND_OSSEMUL user-selectable") means we need to set CONFIG_SND_OSSEMUL in our configs, otherwise we lose some of the SND symbols. And commit 0181307abc1d ("ALSA: seq: Reorganize kconfig and build") reorganised things, which causes the churn. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_CRYPTO_NULL in g5 / c2kMichael Ellerman
Since commit 3491244c6298 ("crypto: echainiv - Set Kconfig default to m") we no longer need to set CONFIG_CRYPTO_NULL in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Update for CONFIG_DEBUG_FS being selected via CONFIG_RCU_TRACEMichael Ellerman
In commit 961518259b3b ("rcu: Enable RCU tracepoints by default to aid in debugging"), CONFIG_RCU_TRACE was made default y (if CONFIG_TREE_RCU=y, which it is for some of our configs). That in turn causes CONFIG_TREE_RCU_TRACE to be enabled, which selects CONFIG_DEBUG_FS. The end result is that CONFIG_DEBUG_FS is forced on, meaning we don't have to enable it in some of our configs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_FHANDLEMichael Ellerman
Since commit f76be61755c5 ("Make CONFIG_FHANDLE default y") we no longer need to set CONFIG_FHANDLE in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Explicitly drop CONFIG_INPUT_MOUSEDEVMichael Ellerman
In commit 73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switched from default y to default n, with the explanation: Evdev interface has been available for many years and by now everyone is switched to using it, so let's stop offering /dev/input/mouseN and /dev/psaux by default. We had a number of configs which had it enabled, but going by the above explanation probably don't need it enabled anymore. So drop the last remnants of it from our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNGMichael Ellerman
Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Update for symbol movement onlyMichael Ellerman
Update defconfigs for symbols that have moved around, without their value changing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-14powerpc: convert g5_defconfig to use libata PATA driversBartlomiej Zolnierkiewicz
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts g5_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-07-08powerpc/configs: Remove old symbols from defconfigsAndrew Donnellan
Update defconfigs to remove old symbols and comments referencing old symbols. Dropped: * AVERAGE * INET_LRO * EXT3_DEFAULTS_TO_ORDERED * EXT3_FS_XATTR * I2O * INFINIBAND_AMSO1100 * INFINIBAND_EHCA * IP1000 Replaced: * BLK_DEV_XIP -> BLK_DEV_RAM_DAX * CLK_PPC_CORENET -> CLK_QORIQ * EXT2_FS_XIP -> FS_DAX * EXT3_FS* -> EXT4_FS* Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22powerpc: Update G5 defconfigMichael Ellerman
Add CGROUPS and DEVTMPFS, which allows booting with newer userspaces. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20powerpc: Update all configs using savedefconfigMichael Ellerman
It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-03powerpc: Don't build powernv for other platform defconfigsMichael Ellerman
Because powernv arrived after these other platforms, the defconfigs didn't have PPC_POWERNV disabled, and being default y it gets turned on. If we're going to bother having defconfigs for the specific platforms then they should only build the code required for those platforms. The grab bag of everything config is ppc64_defconfig. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-09powerpc: Make CONFIG_FHANDLE=y for all 64 bit powerpc defconfigsCyril Bur
CONFIG_FHANDLE is a requirement for systemd and with the increasing uptake of systemd within distros it makes sense for 64 bit defconfigs to include it. Signed-off-by: Cyril Bur <cyril.bur@au1.ibm.com>
2014-05-27USB: delete CONFIG_USB_DEVICEFS from defconfigNaoki MATSUMOTO
It no longer occurs in Kconfig. USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig. Signed-off-by: Naoki MATSUMOTO <nekomatu+linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-20powerpc: Update default configurationsAlistair Popple
Update default configurations for systems with CONFIG_BOOTX_TEXT selected so that they continue to print early debug messages as is currently the case. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24Revert "powerpc: Update g5_defconfig"Benjamin Herrenschmidt
This reverts commit b1acf1bb544cf28c1f4be0a45620fa899c74b7e9. Something went horribly wrong when I did savedefconfig, not sure what, but what's in there is busted so let's revert it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-27powerpc: Update g5_defconfigBenjamin Herrenschmidt
This updates the g5 defconfig to include nouveau instead of nvidiafb (which works much better nowadays, in fact the latter crashes on modern distros), and to set CONFIG_VT_HW_CONSOLE_BINDING without which takeover from the firmware offb by nouveau doesn't work properly (and leads to unexplained black screens for some users). The rest is churn of going through defconfig / savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30powerpc: Remove CONFIG_POWER4_ONLYAnton Blanchard
Remove CONFIG_POWER4_ONLY, the option is badly named and only does two things: - It wraps the MMU segment table code. With feature fixups there is little downside to compiling this in. - It uses the newer mtocrf instruction in various assembly functions. Instead of making this a compile option just do it at runtime via a feature fixup. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09powerpc: Trim defconfigsBenjamin Herrenschmidt
This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-15powerpc: Disable CONFIG_SYSFS_DEPRECATEDGrant Likely
Acked-by: Grant Likely <grant.likely@secretlab.ca> On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/defconfigs: Disable token ring in powerpc defconfigsAnton Blanchard
Token what? Lets save some space in our powerpc kernels and remove token ring support. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/defconfigs: Reduce 64bit vmlinux by making acenic and cramfs modulesAnton Blanchard
Machines with acenic adapters are rare these days, so we may as well make it a module. Cramfs is also very rarely used so we can make it a module. Together this saves 143kB on a 64bit compile: text data bss dec hex filename 8247176 1729404 1221988 11198568 aae068 vmlinux~ 8134997 1727588 1188836 11051421 a8a19d vmlinux Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-26eeprom: More consistent symbol namesJean Delvare
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2008-11-11powerpc: Update desktop/server defconfigsPaul Mackerras
Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26powerpc: Update defconfigs for most non-embedded platformsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-16[POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigsPaul Mackerras
This enables CONFIG_ATA_SFF in the defconfigs that are intended to work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig. Since the support for the SATA cell in the K2 chipset is provided by the sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20[POWERPC] Update defconfigs for desktop/server systemsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29[POWERPC] windfarm: Add PowerMac 12,1 supportÉtienne Bersac
This implements a new driver named windfarm_pm121, which drives the fans on PowerMac 12,1 machines : iMac G5 iSight (rev C) 17" and 20". It's based on the windfarm_pm81 driver from Benjamin Herrenschmidt. This includes fixes from David Woodhouse correcting the names of some of the sensors. Signed-off-by: Étienne Bersac <bersace@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-07[POWERPC] Remove CONFIG_PCI_LEGACY from some configsStephen Rothwell
This will remove some build warnings and doesn't stop us building any drivers that we were building previously with these configs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Update some defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06[POWERPC] Update defconfigsPaul Mackerras
This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Enable SLUB in *_defconfigAnton Blanchard
When checking out the new NO_HZ support in powerpc, I noticed we never slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu timer that causes this. After switching to SLUB I see some nice 4 second sleeps which is the limit on this POWER6 box (the decrementer ticks at 512MHz): slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 3.96 sec slept 3.80 sec slept 2.99 sec Since SLUB is now the default and some powerpc defconfigs already enable it, lets enable SLUB across the board for consistency. While doing this I also noticed that the maple defconfig has SLAB debugging enabled which is sure to make your box nice and slow. Fix that too. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] Update defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26[POWERPC] Update defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26[POWERPC] Update g5_defconfigwill schmidt
Update the g5_defconfig with default settings. This is to keep things up to date, and specifically to ensure that the CONFIG_MACINTOSH_DRIVERS option is enabled. This also turns on CONFIG_MSI. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQSMichael Ellerman
Rename MPIC_BROKEN_U3 to something a little more descriptive. Its effect is to enable support for HT irqs behind the PCI-X/HT bridge on U3/U4 (aka. CPC9x5) parts. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-22[POWERPC] Update defconfigsPaul Mackerras
Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-26[POWERPC] update powerpc defconfig files after libata kconfig breakageOlaf Hering
Update defconfig files after libata .config breakage sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit (git 2.34.1) at 2024-06-08 23:17:44 +0000