| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add initial support to recognise the HeXin C2000 processor.
- Add papr-vpd and papr-sysparm character device drivers for VPD &
sysparm retrieval, so userspace tools can be adapted to avoid doing
raw firmware calls from userspace.
- Sched domains optimisations for shared processor partitions on
P9/P10.
- A series of optimisations for KVM running as a nested HV under
PowerVM.
- Other small features and fixes.
Thanks to Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe
Leroy, Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand,
Gustavo A. R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao,
Kunwu Chan, Li kunyu, Li zeming, Masahiro Yamada, Michal Suchánek,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Randy Dunlap, Sathvika
Vasireddy, Srikar Dronamraju, Stephen Rothwell, Vaibhav Jain, and
Zhao Ke.
* tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (96 commits)
powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2
powerpc/86xx: Drop unused CONFIG_MPC8610
powerpc/powernv: Add error handling to opal_prd_range_is_valid
selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES"
powerpc/hvcall: Reorder Nestedv2 hcall opcodes
powerpc/ps3: Add missing set_freezable() for ps3_probe_thread()
powerpc/mpc83xx: Use wait_event_freezable() for freezable kthread
powerpc/mpc83xx: Add the missing set_freezable() for agent_thread_fn()
powerpc/fsl: Fix fsl,tmu-calibration to match the schema
powerpc/smp: Dynamically build Powerpc topology
powerpc/smp: Avoid asym packing within thread_group of a core
powerpc/smp: Add __ro_after_init attribute
powerpc/smp: Disable MC domain for shared processor
powerpc/smp: Enable Asym packing for cores on shared processor
powerpc/sched: Cleanup vcpu_is_preempted()
powerpc: add cpu_spec.cpu_features to vmcoreinfo
powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
powerpc/powernv: Add a null pointer check in opal_powercap_init()
powerpc/powernv: Add a null pointer check in opal_event_init()
powerpc/powernv: Add a null pointer check to scom_debug_init_one()
...
|
|
Now that we are retiring the IPT action.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian
builds"), merged in Linux-6.5-rc1 changes the calling ABI in a way
that is incompatible with the current code for the PS3's LV1 hypervisor
calls.
This change just adds the line '# CONFIG_PPC64_BIG_ENDIAN_ELF_ABI_V2 is not set'
to the ps3_defconfig file so that the PPC64_ELF_ABI_V1 is used.
Fixes run time errors like these:
BUG: Kernel NULL pointer dereference at 0x00000000
Faulting instruction address: 0xc000000000047cf0
Oops: Kernel access of bad area, sig: 11 [#1]
Call Trace:
[c0000000023039e0] [c00000000100ebfc] ps3_create_spu+0xc4/0x2b0 (unreliable)
[c000000002303ab0] [c00000000100d4c4] create_spu+0xcc/0x3c4
[c000000002303b40] [c00000000100eae4] ps3_enumerate_spus+0xa4/0xf8
Fixes: 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian builds")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/df906ac1-5f17-44b9-b0bb-7cd292a0df65@infradead.org
|
|
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Enable CONFIG_MEM_SOFT_DIRTY to get some test coverage. Distros enable
it, and it has been broken previously. See commit 66b2ca086210
("powerpc/64s/radix: Fix soft dirty tracking").
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231024112726.1819795-1-mpe@ellerman.id.au
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for KVM running as a nested hypervisor under development
versions of PowerVM, using the new PAPR nested virtualisation API
- Add support for the BPF prog pack allocator
- A rework of the non-server MMU handling to support execute-only on
all platforms
- Some optimisations & cleanups for the powerpc qspinlock code
- Various other small features and fixes
Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin
Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael
Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin,
Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant,
Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav
Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan.
* tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits)
powerpc/vmcore: Add MMU information to vmcoreinfo
Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"
powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free]
powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data
powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack
powerpc/bpf: implement bpf_arch_text_copy
powerpc/code-patching: introduce patch_instructions()
powerpc/32s: Implement local_flush_tlb_page_psize()
powerpc/pseries: use kfree_sensitive() in plpks_gen_password()
powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure
powerpc/fsl_msi: Use device_get_match_data()
powerpc: Remove cpm_dp...() macros
powerpc/qspinlock: Rename yield_propagate_owner tunable
powerpc/qspinlock: Propagate sleepy if previous waiter is preempted
powerpc/qspinlock: don't propagate the not-sleepy state
powerpc/qspinlock: propagate owner preemptedness rather than CPU number
powerpc/qspinlock: stop queued waiters trying to set lock sleepy
powerpc/perf: Fix disabling BHRB and instruction sampling
powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API
powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh
...
|
|
Inspired by Salvatore Mesoraca's earlier[1] efforts to provide some
in-tree guidance for kernel hardening Kconfig options, add a new fragment
named "hardening-basic.config" (along with some arch-specific fragments)
that enable a basic set of kernel hardening options that have the least
(or no) performance impact and remove a reasonable set of legacy APIs.
Using this fragment is as simple as running "make hardening.config".
More extreme fragments can be added[2] in the future to cover all the
recognized hardening options, and more per-architecture files can be
added too.
For now, document the fragments directly via comments. Perhaps .rst
documentation can be generated from them in the future (rather than the
other way around).
[1] https://lore.kernel.org/kernel-hardening/1536516257-30871-1-git-send-email-s.mesoraca16@gmail.com/
[2] https://github.com/KSPP/linux/issues/14
Cc: Salvatore Mesoraca <s.mesoraca16@gmail.com>
Cc: x86@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
ReiserFS has been deprecated for a year and a half, yet is still built
as part of a defconfig kernel.
According to commit eb103a51640e ("reiserfs: Deprecate reiserfs"), the
filesystem is slated to be removed in 2025. Remove it from the defconfig
profiles now, as part of its deprecation process.
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230918175529.19011-3-peter@n8pjl.ca
|
|
Add more config options that wouldn't be done by the generic debug
config in kernel/configs/debug.config
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG
Adds an initialized check on each (cpu|mmu)_has_feature()
CONFIG_PPC_IRQ_SOFT_MASK_DEBUG
Adds some extra checks around IRQ mask manipulation
CONFIG_PPC_KUAP_DEBUG
Adds some extra KAUP checks around interrupts/context switching
CONFIG_PPC_RFI_SRR_DEBUG
Adds some extra SSR checks around interrupts/syscalls
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230830044238.578840-1-bgray@linux.ibm.com
|
|
Enable POWER_RESET, and drop ADB_CUDA as it will now be selected.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/73716a14e9a24bcea4ca6c454aae308c419933c6.1694685860.git.tanyuan@tinylab.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow,
and -Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and
sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined
anywhere
- Show help messages of config fragments in 'make help'
* tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits)
kconfig: fix possible buffer overflow
kbuild: Show marked Kconfig fragments in "help"
kconfig: add warn-unknown-symbols sanity check
kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE
Documentation/llvm: refresh docs
modpost: Skip .llvm.call-graph-profile section check
kbuild: support modules_sign for external modules as well
kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
kbuild: move more module installation code to scripts/Makefile.modinst
kbuild: reduce the number of mkdir calls during modules_install
kbuild: remove $(MODLIB)/source symlink
kbuild: move depmod rule to scripts/Makefile.modinst
kbuild: add modules_sign to no-{compiler,sync-config}-targets
kbuild: do not run depmod for 'make modules_sign'
kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules
alpha: remove <asm/export.h>
alpha: replace #include <asm/export.h> with #include <linux/export.h>
ia64: remove <asm/export.h>
ia64: replace #include <asm/export.h> with #include <linux/export.h>
sparc: remove <asm/export.h>
...
|
|
Currently the Kconfig fragments in kernel/configs and arch/*/configs
that aren't used internally aren't discoverable through "make help",
which consists of hard-coded lists of config fragments. Instead, list
all the fragment targets that have a "# Help: " comment prefix so the
targets can be generated dynamically.
Add logic to the Makefile to search for and display the fragment and
comment. Add comments to fragments that are intended to be direct targets.
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
|
|
In 5.10 commit 5e84dd547bce ("powerpc/configs/skiroot: Enable some more
hardening options") set SLUB_DEBUG_ON.
When 5.14 came around, commit 792702911f58 ("slub: force on
no_hash_pointers when slub_debug is enabled") print all the
pointers when SLUB_DEBUG_ON is set. This was fine, but in 5.12 commit
5ead723a20e0 ("lib/vsprintf: no_hash_pointers prints all addresses as
unhashed") added the warning at boot.
Disable SLAB_DEBUG_ON as we don't want the nasty warning. We have
CONFIG_EXPERT so SLAB_DEBUG is enabled. We do lose the settings in
DEBUG_DEFAULT_FLAGS, but it's not clear that these should have been
always-on anyway.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230705023056.16273-1-joel@jms.id.au
|
|
There is only one Kconfig user of CONFIG_EMBEDDED and it can be switched
to EXPERT or "if !ARCH_MULTIPLATFORM" (suggested by Arnd).
Link: https://lkml.kernel.org/r/20230816055010.31534-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [RISC-V]
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Drop CONFIG_IP_NF_TARGET_CLUSTERIP as it was removed in commit 9db5d918e2c0
("netfilter: ip_tables: remove clusterip target").
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817115017.35663-5-twoerner@gmail.com
|
|
Serial is a critical feature for logging and debuging, and the other
architectures enable serial by default.
Let's enable CONFIG_SERIAL_PMACZILOG and CONFIG_SERIAL_PMACZILOG_CONSOLE
by default.
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/bb7b5f9958b3e3a20f6573ff7ce7c5dc566e7e32.1690982937.git.tanyuan@tinylab.org
|
|
Enable all the acclerated crypto algorithms as modules in the 64-bit
defconfig, to get more test coverage.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230717115223.286158-1-mpe@ellerman.id.au
|
|
Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
use the -mprofile-kernel option (kernel specific ftrace ABI) for big
endian ELFv2 kernels
- Add initial Dynamic Execution Control Register (DEXCR) support, and
allow the ROP protection instructions to be used on Power 10
- Various other small features and fixes
Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.
* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
powerpc: remove checks for binutils older than 2.25
powerpc: Fail build if using recordmcount with binutils v2.37
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
powerpc/iommu: Only build sPAPR access functions on pSeries
powerpc: powernv: Annotate data races in opal events
powerpc: Mark writes registering ipi to host cpu through kvm and polling
powerpc: Annotate accesses to ipi message flags
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
powerpc: qspinlock: Mark accesses to qnode lock checks
powerpc/powernv/pci: Remove last IODA1 defines
powerpc/powernv/pci: Remove MVE code
powerpc/powernv/pci: Remove ioda1 support
powerpc: 52xx: Make immr_id DT match tables static
powerpc: mpc512x: Remove open coded "ranges" parsing
powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
powerpc: fsl: Use of_property_read_reg() to parse "reg"
powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
macintosh: Use of_property_read_reg() to parse "reg"
...
|
|
The MPC8541/8548/8555 Configurable Development System (CDS) were the
vehicle used to provide evaluation of the 1st e500-v2 CPUs around 2007.
Similar to the earlier MPC83xx-MDS systems we removed, the "brains"
exist on a PCI-X card, but additional connectors exist to the right of
the PCI-X slot, two structural metal pins are used to provide stability
in a vertical ATX mounting, and the CPU is now on a daughter-card vs. a
clamped down BGA.
Given the extra complexity and risk of connector damage, the 8548CDS
I had access to came pre-assembled in a basic white Antec case common
for that era, and I'm inclined to assume that was the default.
Power was typical "Pentium4" 2005 ATX - the main 20 pin connector went
to the PCI ATX form factor backplane, and the 4 pin black/yellow went
to the CPU card.
Like previous evaluation boards, they attempted to provide break-out
connectors for as many features as possible, and that made for a fairly
complex looking system.
In any case, these are over 15 years old, and fairly complex systems,
originally made for a small group of industry related people, and made
for use where quiet fan operation wasn't important. Given that, it
makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-3-paul.gortmaker@windriver.com
|
|
Based on the revision history in the manual(s), these e500-v1
platforms were first available around 2002.
Like a lot of evaluation boards, they attempted to provide break-out
connectors for all possible features, and that combined with four
PCI-X slots (and the age/era) meant for a considerably large board.
As I recall it, from a Linux point of view, the biggest difference
between 8540 and 8560 was in the UART implementation, and that is
reflected in a diff of the defconfigs.
In any case, these are over 20 years old, and by today's standards
only have a small amount of DDR1 memory, and were not widely available.
Given that, it makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-2-paul.gortmaker@windriver.com
|
|
As discussed at LSF/MM [1] [2] and with no objections raised there,
deprecate the SLAB allocator. Rename the user-visible option so that
users with CONFIG_SLAB=y get a new prompt with explanation during make
oldconfig, while make olddefconfig will just switch to SLUB.
In all defconfigs with CONFIG_SLAB=y remove the line so those also
switch to SLUB. Regressions due to the switch should be reported to
linux-mm and slab maintainers.
[1] https://lore.kernel.org/all/4b9fc9c6-b48c-198f-5f80-811a44737e5f@suse.cz/
[2] https://lwn.net/Articles/932201/
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Helge Deller <deller@gmx.de> # parisc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for building the kernel using PC-relative addressing on
Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine
description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.
* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
powerpc/64s: Disable pcrel code model on Clang
powerpc: Fix merge conflict between pcrel and copy_thread changes
powerpc/configs/powernv: Add IGB=y
powerpc/configs/64s: Drop JFS Filesystem
powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
powerpc/configs: Make pseries_le an alias for ppc64le_guest
powerpc/configs: Incorporate generic kvm_guest.config into guest configs
powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
powerpc/configs/64s: Enable Device Mapper options
powerpc/configs/64s: Enable PSTORE
powerpc/configs/64s: Enable VLAN support
powerpc/configs/64s: Enable BLK_DEV_NVME
powerpc/configs/64s: Drop REISERFS
powerpc/configs/64s: Use SHA512 for module signatures
powerpc/configs/64s: Enable IO_STRICT_DEVMEM
powerpc/configs/64s: Enable SCHEDSTATS
powerpc/configs/64s: Enable DEBUG_VM & other options
powerpc/configs/64s: Enable EMULATED_STATS
powerpc/configs/64s: Enable KUNIT and most tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc drivers updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost
breaks even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
mcb-lpc: Reallocate memory region to avoid memory overlapping
mcb-pci: Reallocate memory region to avoid memory overlapping
mcb: Return actual parsed size when reading chameleon table
kernel/configs: Drop Android config fragments
virt: acrn: Replace obsolete memalign() with posix_memalign()
spmi: Add a check for remove callback when removing a SPMI driver
spmi: fix W=1 kernel-doc warnings
spmi: mtk-pmif: Drop of_match_ptr for ID table
spmi: pmic-arb: Convert to platform remove callback returning void
spmi: mtk-pmif: Convert to platform remove callback returning void
spmi: hisi-spmi-controller: Convert to platform remove callback returning void
w1: gpio: remove unnecessary ENOMEM messages
w1: omap-hdq: remove unnecessary ENOMEM messages
w1: omap-hdq: add SPDX tag
w1: omap-hdq: allow compile testing
w1: matrox: remove unnecessary ENOMEM messages
w1: matrox: use inline over __inline__
w1: matrox: switch from asm to linux header
w1: ds2482: do not use assignment in if condition
w1: ds2482: drop unnecessary header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
The "biggest" thing in here is the removal of two obsolete drivers,
u132-hcd and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems"
* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
usb: dwc3: gadget: Execute gadget stop after halting the controller
media: radio-shark: Add endpoint checks
USB: sisusbvga: Add endpoint checks
USB: core: Add routines for endpoint checks in old drivers
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
usb: dwc3: core: add support for disabling High-speed park mode
dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
usb: mtu3: add optional clock xhci_ck and frmcnt_ck
dt-bindings: usb: mtu3: add two optional clocks
usb: mtu3: expose role-switch control to userspace
usb: mtu3: unlock @mtu->lock just before giving back request
usb: mtu3: fix kernel panic at qmu transfer done irq handler
usb: mtu3: use boolean return value
usb: mtu3: give back request when rx error happens
usb: chipidea: fix missing goto in `ci_hdrc_probe`
usb: gadget: udc: core: Prevent redundant calls to pullup
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
usb: typec: ucsi: don't print PPM init deferred errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Code cleanup and dead code removal
* tag 'printk-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove obsoleted check for non-existent "user" object
lib/vsprintf: Use isodigit() for the octal number check
Remove orphaned CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT
|
|
Some powernv machines use IGB for networking, so build the driver in to
enable net booting such machines.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230420052149.1328094-1-mpe@ellerman.id.au
|
|
Unlikely that anyone is still regularly using JFS, drop it from the
defconfig.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230420051609.1324201-2-mpe@ellerman.id.au
|
|
The ext4 code will mount ext2 filesystems, no need to build in both.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230420051609.1324201-1-mpe@ellerman.id.au
|
|
Rather than trying to keep multiple configs up to date, make
pseries_defconfig an alias for ppc64le_guest_defconfig.
NOTE, pseries_defconfig was a big endian config, but this commit
switches it to little endian.
Almost all distros are ppc64le these days, so little endian is much more
likely to be what a user wants when they build for "pseries".
For an actual big endian guest, use ppc64_guest_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-32-mpe@ellerman.id.au
|
|
Incorporate the generic kvm_guest.config into the powerpc guest configs,
ppc64[le]_guest_defconfig.
This brings in some useful options, in particular 9P support, and also
means future additions to the generic file will be automatically picked
up by the powerpc configs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-30-mpe@ellerman.id.au
|
|
These drivers are sometimes required to have functional networking in a
guest, so build them in when building ppc64[le]_guest_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-29-mpe@ellerman.id.au
|
|
Add device mapper options for test coverage and in case folks are
booting systems that require them.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-28-mpe@ellerman.id.au
|
|
Like pseries & powernv_defconfig, enable PSTORE.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-27-mpe@ellerman.id.au
|
|
Most other configs, and distros enable it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-26-mpe@ellerman.id.au
|
|
Copy powernv_defconfig and enable BLK_DEV_NVME.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-25-mpe@ellerman.id.au
|
|
No reason to use this anymore.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-24-mpe@ellerman.id.au
|
|
Modern distros use SHA512 for module signing.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-23-mpe@ellerman.id.au
|
|
Distros enable it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-22-mpe@ellerman.id.au
|
|
Distros enable it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-21-mpe@ellerman.id.au
|
|
Fedora enables DEBUG_VM, which has led to occasions where a VM_BUG_ON()
is not caught by upstream testing, but rather is first found in Fedora,
which is not how it's meant to be.
PAGE_OWNER & PAGE_POISONING both need to be enabled on the kernel
command line, so should not add much overhead in normal operation.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-20-mpe@ellerman.id.au
|
|
This is enabled in some of the other powerpc configs, and can be useful
for debugging, so enable it in ppc64[le]_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-19-mpe@ellerman.id.au
|
|
All built as modules, so the tests only happen when the modules are
loaded, not affecting normal boot time.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-18-mpe@ellerman.id.au
|
|
Fedora, CentOS, RHEL & SUSE all enable it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-17-mpe@ellerman.id.au
|
|
Multiple distros enable these.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-16-mpe@ellerman.id.au
|
|
Fedora & CentOS enable these.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-15-mpe@ellerman.id.au
|
