summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/head_64.S
AgeCommit message (Collapse)Author
2020-09-08powerpc/64: Remove unused generic_secondary_thread_init()Michael Ellerman
The last caller was removed in 2014 in commit fb5a515704d7 ("powerpc: Remove platforms/wsp and associated pieces"). As Jordan noticed even though there are no callers, the code above in fsl_secondary_thread_init() falls through into generic_secondary_thread_init(). So we can remove the _GLOBAL but not the body of the function. However because fsl_secondary_thread_init() is inside #ifdef CONFIG_PPC_BOOK3E, we can never reach the body of generic_secondary_thread_init() unless CONFIG_PPC_BOOK3E is enabled, so we can wrap the whole thing in a single #ifdef. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015704.1976364-1-mpe@ellerman.id.au
2020-05-15powerpc/64: Don't initialise init_task->thread.regsMichael Ellerman
Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200428123130.73078-1-mpe@ellerman.id.au
2020-03-25powerpc/64s: Fix section mismatch warnings from boot codeMichael Ellerman
We currently have two section mismatch warnings: The function __boot_from_prom() references the function __init prom_init(). The function start_here_common() references the function __init start_kernel(). The warnings are correct, we do have branches from non-init code into init code, which is freed after boot. But we don't expect to ever execute any of that early boot code after boot, if we did that would be a bug. In particular calling into OF after boot would be fatal because OF is no longer resident. So for now fix the warnings by marking the relevant functions as __REF, which puts them in the ".ref.text" section. This causes some reordering of the functions in the final link: @@ -217,10 +217,9 @@ c00000000000b088 t generic_secondary_common_init c00000000000b124 t __mmu_off c00000000000b14c t __start_initialization_multiplatform -c00000000000b1ac t __boot_from_prom -c00000000000b1ec t __after_prom_start -c00000000000b260 t p_end -c00000000000b27c T copy_and_flush +c00000000000b1ac t __after_prom_start +c00000000000b220 t p_end +c00000000000b23c T copy_and_flush c00000000000b300 T __secondary_start c00000000000b300 t copy_to_here c00000000000b344 t start_secondary_prolog @@ -228,8 +227,9 @@ c00000000000b36c t enable_64b_mode c00000000000b388 T relative_toc c00000000000b3a8 t p_toc -c00000000000b3b0 t start_here_common -c00000000000b3d0 t start_here_multiplatform +c00000000000b3b0 t __boot_from_prom +c00000000000b3f0 t start_here_multiplatform +c00000000000b480 t start_here_common c00000000000b880 T system_call_common c00000000000b974 t system_call c00000000000b9dc t system_call_exit In particular __boot_from_prom moves after copy_to_here, which means it's not copied to zero in the first stage of copy of the kernel to zero. But that's OK, because we only call __boot_from_prom before we do the copy, so it makes no difference when it's copied. The call sequence is: __start -> __start_initialization_multiplatform -> __boot_from_prom -> __start -> __start_initialization_multiplatform -> __after_prom_start -> copy_and_flush -> copy_and_flush (relocated to 0) -> start_here_multiplatform -> early_setup Reported-by: Mauricio Faria de Oliveira <mauricfo@linux.ibm.com> Reported-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200225031328.14676-1-mpe@ellerman.id.au
2019-08-28powerpc/prom: convert PROM_BUG() to standard trapChristophe Leroy
Prior to commit 1bd98d7fbaf5 ("ppc64: Update BUG handling based on ppc32"), BUG() family was using BUG_ILLEGAL_INSTRUCTION which was an invalid instruction opcode to trap into program check exception. That commit converted them to using standard trap instructions, but prom/prom_init and their PROM_BUG() macro were left over. head_64.S and exception-64s.S were left aside as well. Convert them to using the standard BUG infrastructure. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/cdaf4bbbb64c288a077845846f04b12683f8875a.1566817807.git.christophe.leroy@c-s.fr
2019-08-27powerpc/64: optimise LOAD_REG_IMMEDIATE_SYM()Christophe Leroy
Optimise LOAD_REG_IMMEDIATE_SYM() using a temporary register to parallelise operations. It reduces the path from 5 to 3 instructions. Suggested-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bad41ed02531bb0382420cbab50a0d7153b71767.1566311636.git.christophe.leroy@c-s.fr
2019-08-27powerpc: rewrite LOAD_REG_IMMEDIATE() as an intelligent macroChristophe Leroy
Today LOAD_REG_IMMEDIATE() is a basic #define which loads all parts on a value into a register, including the parts that are NUL. This means always 2 instructions on PPC32 and always 5 instructions on PPC64. And those instructions cannot run in parallele as they are updating the same register. Ex: LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) in head_64.S results in: 3c 20 00 00 lis r1,0 60 21 00 00 ori r1,r1,0 78 21 07 c6 rldicr r1,r1,32,31 64 21 00 00 oris r1,r1,0 60 21 40 00 ori r1,r1,16384 Rewrite LOAD_REG_IMMEDIATE() with GAS macro in order to skip the parts that are NUL. Rename existing LOAD_REG_IMMEDIATE() as LOAD_REG_IMMEDIATE_SYM() and use that one for loading value of symbols which are not known at compile time. Now LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) in head_64.S results in: 38 20 40 00 li r1,16384 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d60ce8dd3a383c7adbfc322bf1d53d81724a6000.1566311636.git.christophe.leroy@c-s.fr
2019-07-13Merge tag 'powerpc-5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...
2019-06-16powerpc/64: mark start_here_multiplatform as __refChristophe Leroy
Otherwise, the following warning is encountered: WARNING: vmlinux.o(.text+0x3dc6): Section mismatch in reference from the variable start_here_multiplatform to the function .init.text:.early_setup() The function start_here_multiplatform() references the function __init .early_setup(). This is often because start_here_multiplatform lacks a __init annotation or the annotation of .early_setup is wrong. Fixes: 56c46bba9bbf ("powerpc/64: Fix booting large kernels with STRICT_KERNEL_RWX") Cc: Russell Currey <ruscur@russell.cc> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20powerpc/64: Fix booting large kernels with STRICT_KERNEL_RWXRussell Currey
With STRICT_KERNEL_RWX enabled anything marked __init is placed at a 16M boundary. This is necessary so that it can be repurposed later with different permissions. However, in kernels with text larger than 16M, this pushes early_setup past 32M, incapable of being reached by the branch instruction. Fix this by setting the CTR and branching there instead. Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs") Signed-off-by: Russell Currey <ruscur@russell.cc> [mpe: Fix it to work on BE by using DOTSYM()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/64: Simplify __secondary_start paca->kstack handlingMichael Ellerman
In __secondary_start() we load the thread_info of the idle task of the secondary CPU from current_set[cpu], and then convert it into a stack pointer before storing that back to paca->kstack. As pointed out in commit f761622e5943 ("powerpc: Initialise paca->kstack before early_setup_secondary") it's important that we initialise paca->kstack before calling the MMU setup code, in particular slb_initialize(), because it will bolt the SLB entry for the kstack into the SLB. However we have already setup paca->kstack in cpu_idle_thread_init(), since commit 3b5750644b2f ("[POWERPC] Bolt in SLB entry for kernel stack on secondary cpus") (May 2008). It's also in cpu_idle_thread_init() that we initialise current_set[cpu] with the thread_info pointer, so there is no issue of the timing being different between the two. Therefore the initialisation of paca->kstack in __setup_secondary() is completely redundant, so remove it. This has the added benefit of removing code that runs in real mode, and is therefore restricted by the RMO, and so opens the way for us to enable THREAD_INFO_IN_TASK. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-30powerpc: clean inclusions of asm/feature-fixups.hChristophe Leroy
files not using feature fixup don't need asm/feature-fixups.h files using feature fixup need asm/feature-fixups.h Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-30powerpc/64: Use array of paca pointers and allocate pacas individuallyNicholas Piggin
Change the paca array into an array of pointers to pacas. Allocate pacas individually. This allows flexibility in where the PACAs are allocated. Future work will allocate them node-local. Platforms that don't have address limits on PACAs would be able to defer PACA allocations until later in boot rather than allocate all possible ones up-front then freeing unused. This is slightly more overhead (one additional indirection) for cross CPU paca references, but those aren't too common. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-19powerpc/64: Rename soft_enabled to irq_soft_maskMadhavan Srinivasan
Rename the paca->soft_enabled to paca->irq_soft_mask as it is no longer used as a flag for interrupt state, but a mask. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-19powerpc/64: Add #defines for paca->soft_enabled flagsMadhavan Srinivasan
Two #defines IRQS_ENABLED and IRQS_DISABLED are added to be used when updating paca->soft_enabled. Replace the hardcoded values used when updating paca->soft_enabled with IRQ_(EN|DIS)ABLED #define. No logic change. Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-10powerpc/powernv: Avoid waiting for secondary hold spinloop with OPALNicholas Piggin
OPAL boot does not insert secondaries at 0x60 to wait at the secondary hold spinloop. Instead they are started later, and inserted at generic_secondary_smp_init(), which is after the secondary hold spinloop. Avoid waiting on this spinloop when booting with OPAL firmware. This wait always times out that case. This saves 100ms boot time on powernv, and 10s of seconds of real time when booting on the simulator in SMP. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31powerpc/asm: Convert .llong directives to .8byteTobin C. Harding
.llong is an undocumented PPC specific directive. The generic equivalent is .quad, but even better (because it's self describing) is .8byte. Convert all .llong directives to .8byte. Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-20powerpc/64: Allow for THREAD_SIZE > 16kHamish Martin
Fix an assembler error when the THREAD_SIZE is greater than 16k. Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30powerpc: Change places using CONFIG_KEXEC to use CONFIG_KEXEC_CORE instead.Thiago Jung Bauermann
Commit 2965faa5e03d ("kexec: split kexec_load syscall from kexec core code") introduced CONFIG_KEXEC_CORE so that CONFIG_KEXEC means whether the kexec_load system call should be compiled-in and CONFIG_KEXEC_FILE means whether the kexec_file_load system call should be compiled-in. These options can be set independently from each other. Since until now powerpc only supported kexec_load, CONFIG_KEXEC and CONFIG_KEXEC_CORE were synonyms. That is not the case anymore, so we need to make a distinction. Almost all places where CONFIG_KEXEC was being used should be using CONFIG_KEXEC_CORE instead, since kexec_file_load also needs that code compiled in. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-28powerpc/64e: Convert cmpi to cmpwi in head_64.SNicholas Piggin
From 80f23935cadb ("powerpc: Convert cmp to cmpd in idle enter sequence"): PowerPC's "cmp" instruction has four operands. Normally people write "cmpw" or "cmpd" for the second cmp operand 0 or 1. But, frequently people forget, and write "cmp" with just three operands. With older binutils this is silently accepted as if this was "cmpw", while often "cmpd" is wanted. With newer binutils GAS will complain about this for 64-bit code. For 32-bit code it still silently assumes "cmpw" is what is meant. In this case, cmpwi is called for, so this is just a build fix for new toolchains. Cc: stable@vger.kernel.org # v3.0+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-14powerpc/64: Add an option to force run-at-load to test relocationNicholas Piggin
This adds a config option that can help exercise the case when the kernel is not running at PAGE_OFFSET. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-14Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - EXPORT_SYMBOL for asm source by Al Viro. This does bring a regression, because genksyms no longer generates checksums for these symbols (CONFIG_MODVERSIONS). Nick Piggin is working on a patch to fix this. Plus, we are talking about functions like strcpy(), which rarely change prototypes. - Fixes for PPC fallout of the above by Stephen Rothwell and Nick Piggin - fixdep speedup by Alexey Dobriyan. - preparatory work by Nick Piggin to allow architectures to build with -ffunction-sections, -fdata-sections and --gc-sections - CONFIG_THIN_ARCHIVES support by Stephen Rothwell - fix for filenames with colons in the initramfs source by me. * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (22 commits) initramfs: Escape colons in depfile ppc: there is no clear_pages to export powerpc/64: whitelist unresolved modversions CRCs kbuild: -ffunction-sections fix for archs with conflicting sections kbuild: add arch specific post-link Makefile kbuild: allow archs to select link dead code/data elimination kbuild: allow architectures to use thin archives instead of ld -r kbuild: Regenerate genksyms lexer kbuild: genksyms fix for typeof handling fixdep: faster CONFIG_ search ia64: move exports to definitions sparc32: debride memcpy.S a bit [sparc] unify 32bit and 64bit string.h sparc: move exports to definitions ppc: move exports to definitions arm: move exports to definitions s390: move exports to definitions m68k: move exports to definitions alpha: move exports to actual definitions x86: move exports to actual definitions ...
2016-10-04powerpc: Use gas sections for arranging exception vectorsNicholas Piggin
Use assembler sections of fixed size and location to arrange the 64-bit Book3S exception vector code (64-bit Book3E also uses it in head_64.S for 0x0..0x100). This allows better flexibility in arranging exception code and hiding unimportant details behind macros. Gas sections can be a bit painful to use this way, mainly because the assembler does not know where they will be finally linked. Taking absolute addresses requires a bit of trickery for example, but it can be hidden behind macros for the most part. Generated code is mostly the same except locations, offsets, alignments. The "+ 0x2" is only required for the trap number / kvm exit number, which gets loaded as a constant into a register. Previously, code also used + 0x2 for label names, but we changed to using "H" to distinguish HV case for that. Remove the last vestiges of that. __after_prom_start is taking absolute address of a label in another fixed section. Newer toolchains seemed to compile this okay, but older ones do not. FIXED_SYMBOL_ABS_ADDR is more foolproof, it just takes an additional line to define. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-04powerpc/64: Change the way relocation copy is calculatedNicholas Piggin
With a subsequent patch to put text into different sections, (_end - _stext) can no longer be computed at link time to determine the end of the copy. Instead, calculate it at runtime with (copy_to_here - _stext) + (_end - copy_to_here). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-07ppc: move exports to definitionsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-21powerpc/64: Move the content of setup_system() to setup_arch()Benjamin Herrenschmidt
And kill setup_system(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-14powerpc: Define and use PPC64_ELF_ABI_v2/v1Michael Ellerman
We're approaching 20 locations where we need to check for ELF ABI v2. That's fine, except the logic is a bit awkward, because we have to check that _CALL_ELF is defined and then what its value is. So check it once in asm/types.h and define PPC64_ELF_ABI_v2 when ELF ABI v2 is detected. We also have a few places where what we're really trying to check is that we are using the 64-bit v1 ABI, ie. function descriptors. So also add a #define for that, which simplifies several checks. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Make sure swapper pgdir is properly alignedAneesh Kumar K.V
With 4K page size radix config our level 1 page table size is 64K and it should be naturally aligned. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-16powerpc/book3e-64: Use hardcoded mttmr opcodeScott Wood
This preserves the ability to build using older binutils (reportedly <= 2.22). Fixes: 6becef7ea04a ("powerpc/mpc85xx: Add CPU hotplug support for E6500") Signed-off-by: Scott Wood <oss@buserror.net> Cc: chenhui.zhao@freescale.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-04powerpc/mpc85xx: Add CPU hotplug support for E6500chenhui zhao
Support Freescale E6500 core-based platforms, like t4240. Support disabling/enabling individual CPU thread dynamically. Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
2016-03-04powerpc/rcpm: add RCPM driverchenhui zhao
There is a RCPM (Run Control/Power Management) in Freescale QorIQ series processors. The device performs tasks associated with device run control and power management. The driver implements some features: mask/unmask irq, enter/exit low power states, freeze time base, etc. Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> [scottwood: remove __KERNEL__ ifdef] Signed-off-by: Scott Wood <oss@buserror.net>
2015-10-27powerpc/book3e: support CONFIG_RELOCATABLETiejun Chen
book3e is different with book3s since 3s includes the exception vectors code in head_64.S as it relies on absolute addressing which is only possible within this compilation unit. So we have to get that label address with got. And when boot a relocated kernel, we should reset ipvr properly again after .relocate. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> [scottwood: cleanup and ifdef removal] Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27powerpc/booke64: Fix args to copy_and_flushTiejun Chen
Convert r4/r5, not r6, to a virtual address when calling copy_and_flush. Otherwise, r3 is already virtual, and copy_to_flush tries to access r3+r6, PAGE_OFFSET gets added twice. This isn't normally seen because on book3e we normally enter with the kernel at zero and thus skip copy_to_flush -- but it will be needed for kexec support. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> [scottwood: split patch and rewrote changelog] Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27powerpc/e6500: kexec: Handle hardware threadsScott Wood
The new kernel will be expecting secondary threads to be disabled, not spinning. Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-08-05Merge remote-tracking branch 'scott/next' into nextBenjamin Herrenschmidt
Scott writes: Highlights include e6500 hardware threading support, an e6500 TLB erratum workaround, corenet error reporting, support for a new board, and some minor fixes.
2014-07-29powerpc/e6500: Add support for hardware threadsAndy Fleming
The general idea is that each core will release all of its threads into the secondary thread startup code, which will eventually wait in the secondary core holding area, for the appropriate bit in the PACA to be set. The kick_cpu function pointer will set that bit in the PACA, and thus "release" the core/thread to boot. We also need to do a few things that U-Boot normally does for CPUs (like enable branch prediction). Signed-off-by: Andy Fleming <afleming@freescale.com> [scottwood@freescale.com: various changes, including only enabling threads if Linux wants to kick them] Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-07-28powerpc: Remove STAB codeMichael Ellerman
Old cpus didn't have a Segment Lookaside Buffer (SLB), instead they had a Segment Table (STAB). Now that we've dropped support for those cpus, we can remove the STAB support entirely. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-23powerpc: Fix SMP issues with ppc64le ABIv2Anton Blanchard
There is no need to put a function descriptor in __secondary_hold_spinloop. Use ppc_function_entry to get the instruction address and put it in __secondary_hold_spinloop instead. Also fix an issue where we assumed cur_cpu_spec held a function descriptor. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-04-23powerpc: ABIv2 function calls must place target address in r12Anton Blanchard
To establish addressability quickly, ABIv2 requires the target address of the function being called to be in r12. Fix a number of places in assembly code that we do indirect function calls. We need to avoid function descriptors on ABIv2 too. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-04-23powerpc: Remove some unnecessary uses of _GLOBAL() and _STATIC()Anton Blanchard
There is no need to create a function descriptor for functions called locally out of assembly. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-04-23powerpc: Remove superflous function descriptors in assembly only codeAnton Blanchard
We have a number of places where we load the text address of a local function and indirectly branch to it in assembly. Since it is an indirect branch binutils will not know to use the function text address, so that trick wont work. There is no need for these functions to have a function descriptor so we can replace it with a label and remove the dot symbol. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-04-23powerpc: No need to use dot symbols when branching to a functionAnton Blanchard
binutils is smart enough to know that a branch to a function descriptor is actually a branch to the functions text address. Alan tells me that binutils has been doing this for 9 years. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-01-15powerpc: Delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. The one instance where we add an include for init.h covers off a case where that file was implicitly getting it from another header which itself didn't need it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Fix alignment of secondary cpu spin varsOlof Johansson
Commit 5c0484e25ec0 ('powerpc: Endian safe trampoline') resulted in losing proper alignment of the spinlock variables used when booting secondary CPUs, causing some quite odd issues with failing to boot on PA Semi-based systems. This showed itself on ppc64_defconfig, but not on pasemi_defconfig, so it had gone unnoticed when I initially tested the LE patch set. Fix is to add explicit alignment instead of relying on good luck. :) [ It appears that there is a different issue with PA Semi systems however this fix is definitely correct so applying anyway -- BenH ] Fixes: 5c0484e25ec0 ('powerpc: Endian safe trampoline') Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67811 Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Align p_endAnton Blanchard
p_end is an 8 byte value embedded in the text section. This means it is only 4 byte aligned when it should be 8 byte aligned. Fix this by adding an explicit alignment. This fixes an issue where POWER7 little endian builds with CONFIG_RELOCATABLE=y fail to boot. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-11powerpc: Endian safe trampolineBenjamin Herrenschmidt
Create a trampoline that works in either endian and flips to the expected endian. Use it for primary and secondary thread entry as well as RTAS and OF call return. Credit for finding the magic instruction goes to Paul Mackerras Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14powerpc: Align p_tocAnton Blanchard
p_toc is an 8 byte relative offset to the TOC that we place in the text section. This means it is only 4 byte aligned where it should be 8 byte aligned. Add an explicit alignment. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26powerpc: Add isync to copy_and_flushMichael Neuling
In __after_prom_start we copy the kernel down to zero in two calls to copy_and_flush. After the first call (copy from 0 to copy_to_here:) we jump to the newly copied code soon after. Unfortunately there's no isync between the copy of this code and the jump to it. Hence it's possible that stale instructions could still be in the icache or pipeline before we branch to it. We've seen this on real machines and it's results in no console output after: calling quiesce... returning from prom_init The below adds an isync to ensure that the copy and flushing has completed before any branching to the new instructions occurs. Signed-off-by: Michael Neuling <mikey@neuling.org> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10powerpc/kexec: Add kexec "hold" support for Book3e processorsJimi Xenidis
Motivation: IBM Blue Gene/Q comes with some very strange firmware that I'm trying to get out of using in the kernel. So instead I spin all the threads in the boot wrapper (using the firmware) and have them enter the kexec stub, pre-translated at the virtual "linear" address, never touching firmware again. This works strategy works wonderfully, but I need the following patch in the kexec stub. I believe it should not effect Book3S and Book3E does not appear to be here yet so I'd love to get any criticisms up front. This patch adds two items: 1) Book3e requires that GPR4 survive the "hold" process, so we make sure that happens. 2) Book3e has no real mode, and the hold code exploits this. Since these processors ares always translated, we arrange for the kexeced threads to enter the hold code using the normal kernel linear mapping. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10powerpc: Build kernel with -mcmodel=mediumAnton Blanchard
Finally remove the two level TOC and build with -mcmodel=medium. Unfortunately we can't build modules with -mcmodel=medium due to the tricks the kernel module loader plays with percpu data: # -mcmodel=medium breaks modules because it uses 32bit offsets from # the TOC pointer to create pointers where possible. Pointers into the # percpu data area are created by this method. # # The kernel module loader relocates the percpu data section from the # original location (starting with 0xd...) to somewhere in the base # kernel percpu data space (starting with 0xc...). We need a full # 64bit relocation for this to work, hence -mcmodel=large. On older kernels we fall back to the two level TOC (-mminimal-toc) Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit (git 2.34.1) at 2024-06-17 05:16:19 +0000