summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/setup_64.c
AgeCommit message (Collapse)Author
2017-11-10powerpc/64: Set DSCR default initially from SPRNicholas Piggin
Take the DSCR value set by firmware as the dscr_default value, rather than zero. POWER9 recommends DSCR default to a non-zero value. Signed-off-by: From: Nicholas Piggin <npiggin@gmail.com> [mpe: Make record_spr_defaults() __init] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-10powerpc/powernv: Avoid waiting for secondary hold spinloop with OPALNicholas Piggin
OPAL boot does not insert secondaries at 0x60 to wait at the secondary hold spinloop. Instead they are started later, and inserted at generic_secondary_smp_init(), which is after the secondary hold spinloop. Avoid waiting on this spinloop when booting with OPAL firmware. This wait always times out that case. This saves 100ms boot time on powernv, and 10s of seconds of real time when booting on the simulator in SMP. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31powerpc/64: Fix watchdog configuration regressionsNicholas Piggin
This fixes a couple more bits of fallout from the new hard lockup watchdog patch. It restores the required hw_nmi_get_sample_period() function for the perf watchdog, and removes some function declarations on 64e that are only defined for 64s. This fixes the 64e build when the hardlockup detector is enabled. It restores the default behaviour of disabling the perf watchdog, and also fixes disabling the 64s watchdog when running as a guest. Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31powerpc/64s/radix: Remove bolted-SLB address limit for per-cpu stacksNicholas Piggin
Radix MMU does not take SLB or TLB interrupts when accessing kernel linear address. Remove this restriction for radix mode. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-12powerpc/64s: implement arch-specific hardlockup watchdogNicholas Piggin
Implement an arch-speicfic watchdog rather than use the perf-based hardlockup detector. The new watchdog takes the soft-NMI directly, rather than going through perf. Perf interrupts are to be made maskable in future, so that would prevent the perf detector from working in those regions. Additionally, implement a SMP based detector where all CPUs watch one another by pinging a shared cpumask. This is because powerpc Book3S does not have a true periodic local NMI, but some platforms do implement a true NMI IPI. If a CPU is stuck with interrupts hard disabled, the soft-NMI watchdog does not work, but the SMP watchdog will. Even on platforms without a true NMI IPI to get a good trace from the stuck CPU, other CPUs will notice the lockup sufficiently to report it and panic. [npiggin@gmail.com: honor watchdog disable at boot/hotplug] Link: http://lkml.kernel.org/r/20170621001346.5bb337c9@roar.ozlabs.ibm.com [npiggin@gmail.com: fix false positive warning at CPU unplug] Link: http://lkml.kernel.org/r/20170630080740.20766-1-npiggin@gmail.com [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170616065715.18390-6-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Don Zickus <dzickus@redhat.com> Tested-by: Babu Moger <babu.moger@oracle.com> [sparc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12kernel/watchdog: split up config optionsNicholas Piggin
Split SOFTLOCKUP_DETECTOR from LOCKUP_DETECTOR, and split HARDLOCKUP_DETECTOR_PERF from HARDLOCKUP_DETECTOR. LOCKUP_DETECTOR implies the general boot, sysctl, and programming interfaces for the lockup detectors. An architecture that wants to use a hard lockup detector must define HAVE_HARDLOCKUP_DETECTOR_PERF or HAVE_HARDLOCKUP_DETECTOR_ARCH. Alternatively an arch can define HAVE_NMI_WATCHDOG, which provides the minimum arch_touch_nmi_watchdog, and it otherwise does its own thing and does not implement the LOCKUP_DETECTOR interfaces. sparc is unusual in that it has started to implement some of the interfaces, but not fully yet. It should probably be converted to a full HAVE_HARDLOCKUP_DETECTOR_ARCH. [npiggin@gmail.com: fix] Link: http://lkml.kernel.org/r/20170617223522.66c0ad88@roar.ozlabs.ibm.com Link: http://lkml.kernel.org/r/20170616065715.18390-4-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Tested-by: Babu Moger <babu.moger@oracle.com> [sparc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23powerpc/64: Initialise thread_info for emergency stacksNicholas Piggin
Emergency stacks have their thread_info mostly uninitialised, which in particular means garbage preempt_count values. Emergency stack code runs with interrupts disabled entirely, and is used very rarely, so this has been unnoticed so far. It was found by a proposed new powerpc watchdog that takes a soft-NMI directly from the masked_interrupt handler and using the emergency stack. That crashed at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be garbage. To fix this, zero the entire THREAD_SIZE allocation, and initialize the thread_info. Cc: stable@vger.kernel.org Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Move it all into setup_64.c, use a function not a macro. Fix crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-06powerpc/numa: Fix percpu allocations to be NUMA awareMichael Ellerman
In commit 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"), we switched to the generic implementation of cpu_to_node(), which uses a percpu variable to hold the NUMA node for each CPU. Unfortunately we neglected to notice that we use cpu_to_node() in the allocation of our percpu areas, leading to a chicken and egg problem. In practice what happens is when we are setting up the percpu areas, cpu_to_node() reports that all CPUs are on node 0, so we allocate all percpu areas on node 0. This is visible in the dmesg output, as all pcpu allocs being in group 0: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31 pcpu-alloc: [0] 32 33 34 35 [0] 36 37 38 39 pcpu-alloc: [0] 40 41 42 43 [0] 44 45 46 47 To fix it we need an early_cpu_to_node() which can run prior to percpu being setup. We already have the numa_cpu_lookup_table we can use, so just plumb it in. With the patch dmesg output shows two groups, 0 and 1: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [1] 24 25 26 27 [1] 28 29 30 31 pcpu-alloc: [1] 32 33 34 35 [1] 36 37 38 39 pcpu-alloc: [1] 40 41 42 43 [1] 44 45 46 47 We can also check the data_offset in the paca of various CPUs, with the fix we see: CPU 0: data_offset = 0x0ffe8b0000 CPU 24: data_offset = 0x1ffe5b0000 And we can see from dmesg that CPU 24 has an allocation on node 1: node 0: [mem 0x0000000000000000-0x0000000fffffffff] node 1: [mem 0x0000001000000000-0x0000001fffffffff] Cc: stable@vger.kernel.org # v3.16+ Fixes: 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-12Merge tag 'powerpc-4.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The change to the Linux page table geometry was delayed for more testing with 16G pages, and there's the new CPU features stuff which just needed one more polish before going in. Plus a few changes from Scott which came in a bit late. And then various fixes, mostly minor. Summary highlights: - rework the Linux page table geometry to lower memory usage on 64-bit Book3S (IBM chips) using the Hash MMU. - support for a new device tree binding for discovering CPU features on future firmwares. - Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression on 64e, a fix for a kernel hang on 64e when using a debugger inside a relocated kernel, a qman fix, and misc qe improvements." Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp" * tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Support new device tree binding for discovering CPU features powerpc: Don't print cpu_spec->cpu_name if it's NULL of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle powerpc/64s: Fix unnecessary machine check handler relocation branch powerpc/mm/book3s/64: Rework page table geometry for lower memory usage powerpc: Fix distclean with Makefile.postlink powerpc/64e: Don't place the stack beyond TASK_SIZE powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery powerpc/8xx: Adding support of IRQ in MPC8xx GPIO soc/fsl/qbman: Disable IRQs for deferred QBMan work soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions soc/fsl/qe: only apply QE_General4 workaround on affected SoCs soc/fsl/qe: round brg_freq to 1kHz granularity soc/fsl/qe: get rid of immrbar_virt_to_phys() net: ethernet: ucc_geth: fix MEM_PART_MURAM mode powerpc/64e: Fix hang when debugging programs with relocated kernel
2017-05-09powerpc/64s: Support new device tree binding for discovering CPU featuresNicholas Piggin
The ibm,powerpc-cpu-features device tree binding describes CPU features with ASCII names and extensible compatibility, privilege, and enablement metadata that allows improved flexibility and compatibility with new hardware. The interface is described in detail in ibm,powerpc-cpu-features.txt in this patch. Currently this code is not enabled by default, and there are no released firmwares that provide the binding. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-05Merge tag 'powerpc-4.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Larger virtual address space on 64-bit server CPUs. By default we use a 128TB virtual address space, but a process can request access to the full 512TB by passing a hint to mmap(). - Support for the new Power9 "XIVE" interrupt controller. - TLB flushing optimisations for the radix MMU on Power9. - Support for CAPI cards on Power9, using the "Coherent Accelerator Interface Architecture 2.0". - The ability to configure the mmap randomisation limits at build and runtime. - Several small fixes and cleanups to the kprobes code, as well as support for KPROBES_ON_FTRACE. - Major improvements to handling of system reset interrupts, correctly treating them as NMIs, giving them a dedicated stack and using a new hypervisor call to trigger them, all of which should aid debugging and robustness. - Many fixes and other minor enhancements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt, Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy, Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy, Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin, Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C. Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar, Yang Shi" * tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits) powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it powerpc/powernv: Fix TCE kill on NVLink2 powerpc/mm/radix: Drop support for CPUs without lockless tlbie powerpc/book3s/mce: Move add_taint() later in virtual mode powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body powerpc/smp: Document irq enable/disable after migrating IRQs powerpc/mpc52xx: Don't select user-visible RTAS_PROC powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset() powerpc/eeh: Clean up and document event handling functions powerpc/eeh: Avoid use after free in eeh_handle_special_event() cxl: Mask slice error interrupts after first occurrence cxl: Route eeh events to all drivers in cxl_pci_error_detected() cxl: Force context lock during EEH flow powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST powerpc/xmon: Teach xmon oops about radix vectors powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids powerpc/pseries: Enable VFIO powerpc/powernv: Fix iommu table size calculation hook for small tables powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc powerpc: Add arch/powerpc/tools directory ...
2017-04-28powerpc/64s: Dedicated system reset interrupt stackNicholas Piggin
The system reset interrupt is used for crash/debug situations, so it is desirable to have as little impact on the normal state of the system as possible. Currently it uses the current kernel stack to process the exception. This stores into the stack which may be involved with the crash. The stack pointer may be corrupted, or it may have overflowed. Avoid or minimise these problems by creating a dedicated NMI stack for the system reset interrupt to use. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28powerpc: Disable HFSCR[TM] if TM is not supportedBenjamin Herrenschmidt
On Power8 & Power9 the early CPU inititialisation in __init_HFSCR() turns on HFSCR[TM] (Hypervisor Facility Status and Control Register [Transactional Memory]), but that doesn't take into account that TM might be disabled by CPU features, or disabled by the kernel being built with CONFIG_PPC_TRANSACTIONAL_MEM=n. So later in boot, when we have setup the CPU features, clear HSCR[TM] if the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account for the CONFIG_PPC_TRANSACTIONAL_MEM=n case. Without this a KVM guest might try use TM, even if told not to, and cause an oops in the host kernel. Typically the oops is seen in __kvmppc_vcore_entry() and may or may not be fatal to the host, but is always bad news. In practice all shipping CPU revisions do support TM, and all host kernels we are aware of build with TM support enabled, so no one should actually be able to hit this in the wild. Fixes: 2a3563b023e5 ("powerpc: Setup in HFSCR for POWER8") Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Rewrite change log with input from Sam, add Fixes/stable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28powerpc/64: Don't use early_cpu_has_feature() in cpu_ready_for_interrupts()Michael Ellerman
cpu_ready_for_interrupts() is called after feature patching, so there's no need to use early_cpu_has_feature(). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-06powerpc/64: Avoid panic during boot due to divide by zero in init_cache_info()Anton Blanchard
I see a panic in early boot when building with a recent gcc toolchain. The issue is a divide by zero, which is undefined. Older toolchains let us get away with it: int foo(int a) { return a / 0; } foo: li 9,0 divw 3,3,9 extsw 3,3 blr But newer ones catch it: foo: trap Add a check to avoid the divide by zero. Fixes: e2827fe5c156 ("powerpc/64: Clean up ppc64_caches using a struct per cache") Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/64e: Fix bogus usage of WARN_ONCE()Michael Ellerman
WARN_ONCE() takes a condition and a format string. We were passing a constant string as the condition, and the function name as the format string. It would work, but the message would be just the function name. Fix it by just using WARN_ONCE() directly instead of if (x) WARN_ONCE(). Noticed-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc: Add new cache geometry aux vectorsBenjamin Herrenschmidt
This adds AUX vectors for the L1I,D, L2 and L3 cache levels providing for each cache level the size of the cache in bytes and the geometry (line size and number of ways). We chose to not use the existing alpha/sh definition which packs all the information in a single entry per cache level as it is too restricted to represent some of the geometries used on POWER. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Hard code cache geometry on POWER8Benjamin Herrenschmidt
All shipping firmware versions have it wrong in the device-tree Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Add L2 and L3 cache shape infoBenjamin Herrenschmidt
Retrieved from device-tree when available Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Clean up ppc64_caches using a struct per cacheBenjamin Herrenschmidt
We have two set of identical struct members for the I and D sides and mostly identical bunches of code to parse the device-tree to populate them. Instead make a ppc_cache_info structure with one copy for I and one for D Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Retrieve number of L1 cache sets from device-treeBenjamin Herrenschmidt
It will be used to calculate the associativity Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Fix naming of cache block vs. cache lineBenjamin Herrenschmidt
In a number of places we called "cache line size" what is actually the cache block size, which in the powerpc architecture, means the effective size to use with cache management instructions (it can be different from the actual cache line size). We fix the naming across the board and properly retrieve both pieces of information when available in the device-tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc: Remove obsolete comment about patching instructionsBenjamin Herrenschmidt
We don't patch instructions based on the cache lines or block sizes these days. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc: Move {d,i,u}cache_bsize definitions to a common placeBenjamin Herrenschmidt
The variables are defined twice in setup_32.c and setup_64.c, do it once in setup-common.c instead Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-12-16Merge tag 'powerpc-4.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...
2016-11-30powerpc: Change places using CONFIG_KEXEC to use CONFIG_KEXEC_CORE instead.Thiago Jung Bauermann
Commit 2965faa5e03d ("kexec: split kexec_load syscall from kexec core code") introduced CONFIG_KEXEC_CORE so that CONFIG_KEXEC means whether the kexec_load system call should be compiled-in and CONFIG_KEXEC_FILE means whether the kexec_file_load system call should be compiled-in. These options can be set independently from each other. Since until now powerpc only supported kexec_load, CONFIG_KEXEC and CONFIG_KEXEC_CORE were synonyms. That is not the case anymore, so we need to make a distinction. Almost all places where CONFIG_KEXEC was being used should be using CONFIG_KEXEC_CORE instead, since kexec_file_load also needs that code compiled in. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-15powerpc/64: Fix setting of AIL in hypervisor modeBenjamin Herrenschmidt
Commit d3cbff1b5 "powerpc: Put exception configuration in a common place" broke the setting of the AIL bit (which enables taking exceptions with the MMU still on) on all processors, moving it incorrectly to a function called only on the boot CPU. This was correct for the guest case but not when running in hypervisor mode. This fixes it by partially reverting that commit, putting the setting back in cpu_ready_for_interrupts() Fixes: d3cbff1b5a90 ("powerpc: Put exception configuration in a common place") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-10powerpc/32: Fix crash during static key initBenjamin Herrenschmidt
We cannot do those initializations from apply_feature_fixups() as this function runs in a very restricted environment on 32-bit where the kernel isn't running at its linked address and the PTRRELOC() macro must be used for any global accesss. Instead, split them into a separtate steup_feature_keys() function which is called in a more suitable spot on ppc32. Fixes: 309b315b6ec6 ("powerpc: Call jump_label_init() in apply_feature_fixups()") Reported-and-tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-01powerpc/mm: Convert early cpu/mmu feature check to use the new helpersAneesh Kumar K.V
This switches early feature checks to use the non static key variant of the function. In later patches we will be switching cpu_has_feature() and mmu_has_feature() to use static keys and we can use them only after static key/jump label is initialized. Any check for feature before jump label init should be done using this new helper. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-01powerpc/64: Do feature patching before MMU initMichael Ellerman
Up until now we needed to do the MMU init before feature patching, because part of the MMU init was scanning the device tree and setting and/or clearing some MMU feature bits. Now that we have split that MMU feature modification out into routines called from early_init_devtree() (called earlier) we can now do feature patching before calling MMU init. The advantage of this is it means the remainder of the MMU init runs with the final set of features which will apply for the rest of the life of the system. This means we don't have to special case anything called from MMU init to deal with a changing set of feature bits. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Merge 32-bit and 64-bit setup_arch()Benjamin Herrenschmidt
There is little enough differences now. mpe: Add a/p/k/setup.h to contain the prototypes and empty versions of functions we need, rather than using weak functions. Add a few other empty versions to avoid as many #ifdefs as possible in the code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/64: Make a few boot functions __initBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Re-order setup_panic()Benjamin Herrenschmidt
Do it right after probe_machine() since it's about testing ppc_md, and put the test in the common code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Re-order the call to smp_setup_cpu_maps()Benjamin Herrenschmidt
It makes more sense to do it before intializing xmon() as xmon might use the info in there. We do want to register the console early though in case we want some functioning printk's in the cpu map setup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/64: Move the content of setup_system() to setup_arch()Benjamin Herrenschmidt
And kill setup_system(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/64: Move setting of {i,d}cache_bsize to initialize_cache_info()Benjamin Herrenschmidt
Also remove the completely osbolete comment. We *do* look in the device-tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/64: Move the boot time info banner to a separate functionBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Get rid of ppc_md.init_early()Benjamin Herrenschmidt
It is now called right after platform probe, so the probe function can just do the job. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/64: Move 64-bit probe_machine() to later in the boot processBenjamin Herrenschmidt
We no long need the machine type that early, so we can move probe_machine() to after the device-tree has been expanded. This will allow further consolidation. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Put exception configuration in a common placeBenjamin Herrenschmidt
The various calls to establish exception endianness and AIL are now done from a single point using already established CPU and FW feature bits to decide what to do. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Move 64-bit memory reserves to setup_arch()Benjamin Herrenschmidt
There is really no need to do them that early, early_setup() runs before MMU is on, we should do the strict minimum there to get the MMU going. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Move 64-bit feature fixup earlierBenjamin Herrenschmidt
Make it part of early_setup() as we really want the feature fixups to be applied before we turn on the MMU since they can have an impact on the various assembly path related to MMU management and interrupts. This makes 64-bit match what 32-bit does. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Factor do_feature_fixup callsBenjamin Herrenschmidt
32 and 64-bit do a similar set of calls early on, we move it all to a single common function to make the boot code more readable. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-11powerpc: Move epapr_paravirt_early_init() to early_init_devtree()Benjamin Herrenschmidt
The function is called by both 32-bit and 64-bit early setup right after early_init_devtree(). All it does is run yet another early DT parser which is precisely what early_init_devtree() is about, so move it in there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-11powerpc: Add comment explaining the purpose of setup_kdump_trampoline()Benjamin Herrenschmidt
Anything in early_setup() needs to be justified to be there, in this case, we need the trampolines before we can take exceptions and thus before we turn on the MMU. Also remove a pretty meaningless and misplaced debug message Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fix comment formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-21powerpc: Fix misleading comment in early_setup_secondary()Madhavan Srinivasan
Current comment in the early_setup_secondary() for paca->soft_enabled update is misleading. Comment should say to Mark interrupts "disabled" instead of "enabled". Fix the typo. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-15Merge branch 'topic/livepatch' of ↵Jiri Kosina
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into for-4.7/livepatching-ppc64le Pull livepatching support for ppc64 architecture from Michael Ellerman. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-14powerpc/livepatch: Add livepatch stack to struct thread_infoMichael Ellerman
In order to support live patching we need to maintain an alternate stack of TOC & LR values. We use the base of the stack for this, and store the "live patch stack pointer" in struct thread_info. Unlike the other fields of thread_info, we can not statically initialise that value, so it must be done at run time. This patch just adds the code to support that, it is not enabled until the next patch which actually adds live patch support. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Balbir Singh <bsingharora@gmail.com>
2016-02-09locking/lockdep: Eliminate lockdep_init()Andrey Ryabinin
Lockdep is initialized at compile time now. Get rid of lockdep_init(). Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Krinkin <krinkin.m.u@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: mm-commits@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-27powerpc/book3e-64/kexec: Enable SMP releaseScott Wood
The SMP release mechanism for FSL book3e is different from when booting with normal hardware. In theory we could simulate the normal spin table mechanism, but not at the addresses U-Boot put in the device tree -- so there'd need to be even more communication between the kernel and kexec to set that up. Instead, kexec-tools will set a boolean property linux,booted-from-kexec in the /chosen node. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: devicetree@vger.kernel.org
generated by cgit (git 2.34.1) at 2024-05-18 00:23:57 +0000