summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel
AgeCommit message (Collapse)Author
2019-08-10dma-mapping: fix page attributes for dma_mmap_*Christoph Hellwig
All the way back to introducing dma_common_mmap we've defaulted to mark the pages as uncached. But this is wrong for DMA coherent devices. Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that flag is only treated special on the alloc side for non-coherent devices. Introduce a new dma_pgprot helper that deals with the check for coherent devices so that only the remapping cases ever reach arch_dma_mmap_pgprot and we thus ensure no aliasing of page attributes happens, which makes the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the remaining ones. Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but we'll phase it out soon. Fixes: 64ccc9c033c6 ("common: dma-mapping: add support for generic dma_mmap_* calls") Reported-by: Shawn Anastasio <shawn@anastas.io> Reported-by: Gavin Li <git@thegavinli.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-07-31powerpc/spe: Mark expected switch fall-throughsMichael Ellerman
Mark switch cases where we are expecting to fall through. Fixes errors such as below, seen with mpc85xx_defconfig: arch/powerpc/kernel/align.c: In function 'emulate_spe': arch/powerpc/kernel/align.c:178:8: error: this statement may fall through ret |= __get_user_inatomic(temp.v[3], p++); ^~ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190730141917.21817-1-mpe@ellerman.id.au
2019-07-29powerpc: Wire up clone3 syscallMichael Ellerman
Wire up the new clone3 syscall added in commit 7f192e3cd316 ("fork: add clone3"). This requires a ppc_clone3 wrapper, in order to save the non-volatile GPRs before calling into the generic syscall code. Otherwise we hit the BUG_ON in CHECK_FULL_REGS in copy_thread(). Lightly tested using Christian's test code on a Power8 LE VM. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Christian Brauner <christian@brauner.io> Link: https://lore.kernel.org/r/20190724140259.23554-1-mpe@ellerman.id.au
2019-07-26Merge tag 'docs-5.3-1' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "This is mostly a set of follow-on fixes from Mauro fixing various fallout from the massive RST conversion; a few other small fixes as well" * tag 'docs-5.3-1' of git://git.lwn.net/linux: (21 commits) docs: phy: Drop duplicate 'be made' doc:it_IT: translations in process/ docs/vm: transhuge: fix typo in madvise reference doc:it_IT: rephrase statement doc:it_IT: align translation to mainline docs: load_config.py: ensure subdirs end with "/" docs: virtual: add it to the documentation body docs: remove extra conf.py files docs: load_config.py: avoid needing a conf.py just due to LaTeX docs scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output scripts/sphinx-pre-install: cleanup Gentoo checks scripts/sphinx-pre-install: fix latexmk dependencies scripts/sphinx-pre-install: don't use LaTeX with CentOS 7 scripts/sphinx-pre-install: fix script for RHEL/CentOS docs: conf.py: only use CJK if the font is available docs: conf.py: add CJK package needed by translations docs: pdf: add all Documentation/*/index.rst to PDF output docs: fix broken doc references due to renames docs: power: add it to to the main documentation index docs: powerpc: convert docs to ReST and rename to *.rst ...
2019-07-24Merge tag 'powerpc-5.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "An assortment of non-regression fixes that have accumulated since the start of the merge window. - A fix for a user triggerable oops on machines where transactional memory is disabled, eg. Power9 bare metal, Power8 with TM disabled on the command line, or all Power7 or earlier machines. - Three fixes for handling of PMU and power saving registers when running nested KVM on Power9. - Two fixes for bugs found while stress testing the XIVE interrupt controller code, also on Power9. - A fix to allow guests to boot under Qemu/KVM on Power9 using the the Hash MMU with >= 1TB of memory. - Two fixes for bugs in the recent DMA cleanup, one of which could lead to checkstops. - And finally three fixes for the PAPR SCM nvdimm driver. Thanks to: Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater, Christoph Hellwig, David Gibson, Gautham R. Shenoy, Michael Neuling, Oliver O'Halloran, Satheesh Rajendran, Shawn Anastasio, Suraj Jitindar Singh, Vaibhav Jain" * tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/papr_scm: Force a scm-unbind if initial scm-bind fails powerpc/papr_scm: Update drc_pmem_unbind() to use H_SCM_UNBIND_ALL powerpc/pseries: Update SCM hcall op-codes in hvcall.h powerpc/tm: Fix oops on sigreturn on systems without TM powerpc/dma: Fix invalid DMA mmap behavior KVM: PPC: Book3S HV: XIVE: fix rollback when kvmppc_xive_create fails powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask() powerpc: fix off by one in max_zone_pfn initialization for ZONE_DMA KVM: PPC: Book3S HV: Save and restore guest visible PSSCR bits on pseries powerpc/pmu: Set pmcregs_in_use in paca when running as LPAR KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting powerpc/mm: Limit rma_size to 1TB when running without HV mode
2019-07-22powerpc/tm: Fix oops on sigreturn on systems without TMMichael Neuling
On systems like P9 powernv where we have no TM (or P8 booted with ppc_tm=off), userspace can construct a signal context which still has the MSR TS bits set. The kernel tries to restore this context which results in the following crash: Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ffa4 #69 NIP: c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000 REGS: c00000003fffbd70 TRAP: 0700 Not tainted (5.2.0-11045-g7142b497d8) MSR: 8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]> CR: 42004242 XER: 00000000 CFAR: c0000000000022e0 IRQMASK: 0 GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669 GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000 GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420 GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000 GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000 GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728 NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80 LR [00007fffb2d67e48] 0x7fffb2d67e48 Call Trace: Instruction dump: e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00 e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18 The problem is the signal code assumes TM is enabled when CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as with P9 powernv or if `ppc_tm=off` is used on P8. This means any local user can crash the system. Fix the problem by returning a bad stack frame to the user if they try to set the MSR TS bits with sigreturn() on systems where TM is not supported. Found with sigfuz kernel selftest on P9. This fixes CVE-2019-13648. Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Reported-by: Praveen Pandey <Praveen.Pandey@in.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org
2019-07-19powerpc/dma: Fix invalid DMA mmap behaviorShawn Anastasio
The refactor of powerpc DMA functions in commit 6666cc17d780 ("powerpc/dma: remove dma_nommu_mmap_coherent") incorrectly changes the way DMA mappings are handled on powerpc. Since this change, all mapped pages are marked as cache-inhibited through the default implementation of arch_dma_mmap_pgprot. This differs from the previous behavior of only marking pages in noncoherent mappings as cache-inhibited and has resulted in sporadic system crashes in certain hardware configurations and workloads (see Bugzilla). This commit restores the previous correct behavior by providing an implementation of arch_dma_mmap_pgprot that only marks pages in noncoherent mappings as cache-inhibited. As this behavior should be universal for all powerpc platforms a new file, dma-generic.c, was created to store it. Fixes: 6666cc17d780 ("powerpc/dma: remove dma_nommu_mmap_coherent") # NOTE: fixes commit 6666cc17d780 released in v5.1. # Consider a stable tag: # Cc: stable@vger.kernel.org # v5.1+ # NOTE: fixes commit 6666cc17d780 released in v5.1. # Consider a stable tag: # Cc: stable@vger.kernel.org # v5.1+ Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Shawn Anastasio <shawn@anastas.io> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190717235437.12908-1-shawn@anastas.io
2019-07-17docs: powerpc: convert docs to ReST and rename to *.rstMauro Carvalho Chehab
Convert docs to ReST and add them to the arch-specific book. The conversion here was trivial, as almost every file there was already using an elegant format close to ReST standard. The changes were mostly to mark literal blocks and add a few missing section title identifiers. One note with regards to "--": on Sphinx, this can't be used to identify a list, as it will format it badly. This can be used, however, to identify a long hyphen - and "---" is an even longer one. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
2019-07-16Merge tag 'for-linus-20190715' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd and clone3 fixes from Christian Brauner: "This contains a bugfix for CLONE_PIDFD when used with the legacy clone syscall, two fixes to ensure that syscall numbering and clone3 entrypoint implementations will stay consistent, and an update for the maintainers file: - The addition of clone3 broke CLONE_PIDFD for legacy clone on all architectures that use do_fork() directly instead of calling the clone syscall itself. (Fwiw, cleaning do_fork() up is on my todo.) The reason this happened was that during conversion of _do_fork() to use struct kernel_clone_args we missed that do_fork() is called directly by various architectures. This is fixed by making sure that the pidfd argument in struct kernel_clone_args is correctly initialized with the parent_tidptr argument passed down from do_fork(). Additionally, do_fork() missed a check to make CLONE_PIDFD and CLONE_PARENT_SETTID mutually exclusive just a clone() does. This is now fixed too. - When clone3() was introduced we skipped architectures that require special handling for fork-like syscalls. Their syscall tables did not contain any mention of clone3(). To make sure that Arnd's work to make syscall numbers on all architectures identical (minus alpha) was not for naught we are placing a comment in all syscall tables that do not yet implement clone3(). The comment makes it clear that 435 is reserved for clone3 and should not be used. - Also, this contains a patch to make the clone3() syscall definition in asm-generic/unist.h conditional on __ARCH_WANT_SYS_CLONE3. This lets us catch new architectures that implicitly make use of clone3 without setting __ARCH_WANT_SYS_CLONE3 which is a good indicator that they did not check whether it needs special treatment or not. - Finally, this contains a patch to add me as maintainer for pidfd stuff so people can start blaming me (more)" * tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: MAINTAINERS: add new entry for pidfd api unistd: protect clone3 via __ARCH_WANT_SYS_CLONE3 arch: mark syscall number 435 reserved for clone3 clone: fix CLONE_PIDFD support
2019-07-15arch: mark syscall number 435 reserved for clone3Christian Brauner
A while ago Arnd made it possible to give new system calls the same syscall number on all architectures (except alpha). To not break this nice new feature let's mark 435 for clone3 as reserved on all architectures that do not yet implement it. Even if an architecture does not plan to implement it this ensures that new system calls coming after clone3 will have the same number on all architectures. Signed-off-by: Christian Brauner <christian@brauner.io> Cc: linux-arch@vger.kernel.org Cc: linux-alpha@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-mips@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/r/20190714192205.27190-2-christian@brauner.io Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-13Merge tag 'powerpc-5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...
2019-07-12powerpc/eeh: Handle hugepages in ioremap spaceOliver O'Halloran
In commit 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space") support for using hugepages in the vmalloc and ioremap areas was enabled for radix. Unfortunately this broke EEH MMIO error checking. Detection works by inserting a hook which checks the results of the ioreadXX() set of functions. When a read returns a 0xFFs response we need to check for an error which we do by mapping the (virtual) MMIO address back to a physical address, then mapping physical address to a PCI device via an interval tree. When translating virt -> phys we currently assume the ioremap space is only populated by PAGE_SIZE mappings. If a hugepage mapping is found we emit a WARN_ON(), but otherwise handles the check as though a normal page was found. In pathalogical cases such as copying a buffer containing a lot of 0xFFs from BAR memory this can result in the system not booting because it's too busy printing WARN_ON()s. There's no real reason to assume huge pages can't be present and we're prefectly capable of handling them, so do that. Fixes: 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space") Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190710150517.27114-1-oohall@gmail.com
2019-07-10Merge tag 'pidfd-updates-v5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This adds two main features. - First, it adds polling support for pidfds. This allows process managers to know when a (non-parent) process dies in a race-free way. The notification mechanism used follows the same logic that is currently used when the parent of a task is notified of a child's death. With this patchset it is possible to put pidfds in an {e}poll loop and get reliable notifications for process (i.e. thread-group) exit. - The second feature compliments the first one by making it possible to retrieve pollable pidfds for processes that were not created using CLONE_PIDFD. A lot of processes get created with traditional PID-based calls such as fork() or clone() (without CLONE_PIDFD). For these processes a caller can currently not create a pollable pidfd. This is a problem for Android's low memory killer (LMK) and service managers such as systemd. Both patchsets are accompanied by selftests. It's perhaps worth noting that the work done so far and the work done in this branch for pidfd_open() and polling support do already see some adoption: - Android is in the process of backporting this work to all their LTS kernels [1] - Service managers make use of pidfd_send_signal but will need to wait until we enable waiting on pidfds for full adoption. - And projects I maintain make use of both pidfd_send_signal and CLONE_PIDFD [2] and will use polling support and pidfd_open() too" [1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22 [2] https://github.com/lxc/lxc/blob/aab6e3eb73c343231cdde775db938994fc6f2803/src/lxc/start.c#L1753 * tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: add pidfd_open() tests arch: wire-up pidfd_open() pid: add pidfd_open() pidfd: add polling selftests pidfd: add polling support
2019-07-10powerpc/irq: Don't WARN continuously in arch_local_irq_restore()Michael Ellerman
When CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is enabled (uncommon), we have a series of WARN_ON's in arch_local_irq_restore(). These are "should never happen" conditions, but if they do happen they can flood the console and render the system unusable. So switch them to WARN_ON_ONCE(). Fixes: e2b36d591720 ("powerpc/64: Don't trace code that runs with the soft irq mask unreconciled") Fixes: 9b81c0211c24 ("powerpc/64s: make PACA_IRQ_HARD_DIS track MSR[EE] closely") Fixes: 7c0482e3d055 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190708061046.7075-1-mpe@ellerman.id.au
2019-07-09Merge tag 'pm-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update PCI and ACPI power management (improved handling of ACPI power resources and PCIe link delays, fixes related to corner cases, hibernation handling rework), fix and extend the operating performance points (OPP) framework, add new cpufreq drivers for Raspberry Pi and imx8m chips, update some other cpufreq drivers, clean up assorted pieces of PM code and documentation and update tools. Specifics: - Improve the handling of shared ACPI power resources in the PCI bus type layer (Mika Westerberg). - Make the PCI layer take link delays required by the PCIe spec into account as appropriate and avoid polling devices in D3cold for PME (Mika Westerberg). - Fix some corner case issues in ACPI device power management and in the PCI bus type layer, optimiza and clean up the handling of runtime-suspended PCI devices during system-wide transitions to sleep states (Rafael Wysocki). - Rework hibernation handling in the ACPI core and the PCI bus type to resume runtime-suspended devices before hibernation (which allows some functional problems to be avoided) and fix some ACPI power management issues related to hiberation (Rafael Wysocki). - Extend the operating performance points (OPP) framework to support a wider range of devices (Rajendra Nayak, Stehpen Boyd). - Fix issues related to genpd_virt_devs and issues with platforms using the set_opp() callback in the OPP framework (Viresh Kumar, Dmitry Osipenko). - Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne). - Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez). - Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210, and armada-37xx cpufreq drivers (David Arcari, Florian Fainelli, Paweł Chmiel, YueHaibing). - Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano). - Fix minor issue in the ACPI system sleep support code and export one function from it (Lenny Szubowicz, Dexuan Cui). - Clean up assorted pieces of PM code and documentation (Kefeng Wang, Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang, Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki). - Update the pm-graph utility to v5.4 (Todd Brandt). - Fix and clean up the cpupower utility (Abhishek Goel, Nick Black)" * tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (57 commits) ACPI: PM: Make acpi_sleep_state_supported() non-static PM: sleep: Drop dev_pm_skip_next_resume_phases() ACPI: PM: Unexport acpi_device_get_power() Documentation: ABI: power: Add missing newline at end of file ACPI: PM: Drop unused function and function header ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS ACPI: PM: Simplify and fix PM domain hibernation callbacks PCI: PM: Simplify bus-level hibernation callbacks PM: ACPI/PCI: Resume all devices during hibernation cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update() cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get() kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset() cpufreq: Don't skip frequency validation for has_target() drivers PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete() PCI / ACPI: Add _PR0 dependent devices ACPI / PM: Introduce concept of a _PR0 dependent device PCI / ACPI: Use cached ACPI device state to get PCI device power state ACPI: PM: Allow transitions to D0 to occur in special cases ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold cpufreq: Use has_target() instead of !setpolicy ...
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-07-08Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug updates from Thomas Gleixner: "A small set of updates for SMP and CPU hotplug: - Abort disabling secondary CPUs in the freezer when a wakeup is pending instead of evaluating it only after all CPUs have been offlined. - Remove the shared annotation for the strict per CPU cfd_data in the smp function call core code. - Remove the return values of smp_call_function() and on_each_cpu() as they are unconditionally 0. Fixup the few callers which actually bothered to check the return value" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Remove smp_call_function() and on_each_cpu() return values smp: Do not mark call_function_data as shared cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()
2019-07-08Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
2019-07-08Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM: sleep: Drop dev_pm_skip_next_resume_phases() ACPI: PM: Drop unused function and function header ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS ACPI: PM: Simplify and fix PM domain hibernation callbacks PCI: PM: Simplify bus-level hibernation callbacks PM: ACPI/PCI: Resume all devices during hibernation kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset() PM: sleep: Update struct wakeup_source documentation drivers: base: power: remove wakeup_sources_stats_dentry variable PM: suspend: Rename pm_suspend_via_s2idle() PM: sleep: Show how long dpm_suspend_start() and dpm_suspend_end() take PM: hibernate: powerpc: Expose pfn_is_nosave() prototype
2019-07-06powerpc/module64: Use symbolic instructions names.Christophe Leroy
To increase readability/maintainability, replace hard coded instructions values by symbolic names. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Fix R_PPC64_ENTRY case, the addi reads from r2 not r12] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-06powerpc/module32: Use symbolic instructions names.Christophe Leroy
To increase readability/maintainability, replace hard coded instructions values by symbolic names. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-06powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.hChristophe Leroy
PPC_HA() PPC_HI() and PPC_LO() macros are nice macros. Move them from module64.c to ppc-opcode.h in order to use them in other places. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Clean up formatting in new code, drop duplicates in ftrace.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-06powerpc/module64: Fix comment in R_PPC64_ENTRY handlingMichael Ellerman
The comment here is wrong, the addi reads from r2 not r12. The code is correct, 0x38420000 = addi r2,r2,0. Fixes: a61674bdfc7c ("powerpc/module: Handle R_PPC64_ENTRY relocations") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/64: reuse PPC32 static inline flush_dcache_range()Christophe Leroy
This patch drops the assembly PPC64 version of flush_dcache_range() and re-uses the PPC32 static inline version. With GCC 8.1, the following code is generated: void flush_test(unsigned long start, unsigned long stop) { flush_dcache_range(start, stop); } 0000000000000130 <.flush_test>: 130: 3d 22 00 00 addis r9,r2,0 132: R_PPC64_TOC16_HA .data+0x8 134: 81 09 00 00 lwz r8,0(r9) 136: R_PPC64_TOC16_LO .data+0x8 138: 3d 22 00 00 addis r9,r2,0 13a: R_PPC64_TOC16_HA .data+0xc 13c: 80 e9 00 00 lwz r7,0(r9) 13e: R_PPC64_TOC16_LO .data+0xc 140: 7d 48 00 d0 neg r10,r8 144: 7d 43 18 38 and r3,r10,r3 148: 7c 00 04 ac hwsync 14c: 4c 00 01 2c isync 150: 39 28 ff ff addi r9,r8,-1 154: 7c 89 22 14 add r4,r9,r4 158: 7c 83 20 50 subf r4,r3,r4 15c: 7c 89 3c 37 srd. r9,r4,r7 160: 41 82 00 1c beq 17c <.flush_test+0x4c> 164: 7d 29 03 a6 mtctr r9 168: 60 00 00 00 nop 16c: 60 00 00 00 nop 170: 7c 00 18 ac dcbf 0,r3 174: 7c 63 42 14 add r3,r3,r8 178: 42 00 ff f8 bdnz 170 <.flush_test+0x40> 17c: 7c 00 04 ac hwsync 180: 4c 00 01 2c isync 184: 4e 80 00 20 blr 188: 60 00 00 00 nop 18c: 60 00 00 00 nop Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/64: flush_inval_dcache_range() becomes flush_dcache_range()Christophe Leroy
On most arches having function flush_dcache_range(), including PPC32, this function does a writeback and invalidation of the cache bloc. On PPC64, flush_dcache_range() only does a writeback while flush_inval_dcache_range() does the invalidation in addition. In addition it looks like within arch/powerpc/, there are no PPC64 platforms using flush_dcache_range() This patch drops the existing 64 bits version of flush_dcache_range() and renames flush_inval_dcache_range() into flush_dcache_range(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc/pci/of: Parse unassigned resourcesAlexey Kardashevskiy
The pseries platform uses the PCI_PROBE_DEVTREE method of PCI probing which reads "assigned-addresses" of every PCI device and initializes the device resources. However if the property is missing or zero sized, then there is no fallback of any kind and the PCI resources remain undiscovered, i.e. pdev->resource[] array remains empty. This adds a fallback which parses the "reg" property in pretty much same way except it marks resources as "unset" which later make Linux assign those resources proper addresses. This has an effect when: 1. a hypervisor failed to assign any resource for a device; 2. /chosen/linux,pci-probe-only=0 is in the DT so the system may try assigning a resource. Neither is likely to happen under PowerVM. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc/pseries/dma: Allow SWIOTLBAlexey Kardashevskiy
The commit 8617a5c5bc00 ("powerpc/dma: handle iommu bypass in dma_iommu_ops") merged direct DMA ops into the IOMMU DMA ops allowing SWIOTLB as well but only for mapping; the unmapping and bouncing parts were left unmodified. This adds missing direct unmapping calls to .unmap_page() and .unmap_sg(). This adds missing sync callbacks and directs them to the direct DMA hooks. Fixes: 8617a5c5bc00 ("powerpc/dma: handle iommu bypass in dma_iommu_ops") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc: remove device_to_mask()Christoph Hellwig
Use the dma_get_mask() helper from dma-mapping.h instead, as they are functionally identical. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc: Fix compile issue with force DAWRMichael Neuling
If you compile with KVM but without CONFIG_HAVE_HW_BREAKPOINT you fail at linking with: arch/powerpc/kvm/book3s_hv_rmhandlers.o:(.text+0x708): undefined reference to `dawr_force_enable' This was caused by commit c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option"). This moves a bunch of code around to fix this. It moves a lot of the DAWR code in a new file and creates a new CONFIG_PPC_DAWR to enable compiling it. Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") Signed-off-by: Michael Neuling <mikey@neuling.org> [mpe: Minor formatting in set_dawr()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc: silence a -Wcast-function-type warning in dawr_write_file_boolMathieu Malaterre
In commit c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") the following piece of code was added: smp_call_function((smp_call_func_t)set_dawr, &null_brk, 0); Since GCC 8 this triggers the following warning about incompatible function types: arch/powerpc/kernel/hw_breakpoint.c:408:21: error: cast between incompatible function types from 'int (*)(struct arch_hw_breakpoint *)' to 'void (*)(void *)' [-Werror=cast-function-type] Since the warning is there for a reason, and should not be hidden behind a cast, provide an intermediate callback function to avoid the warning. Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc/64s: Rename PPC_INVALIDATE_ERAT to PPC_ISA_3_0_INVALIDATE_ERATNicholas Piggin
This makes it clear to the caller that it can only be used on POWER9 and later CPUs. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Use "ISA_3_0" rather than "ARCH_300"] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc/64s/exception: simplify hmi control flowNicholas Piggin
Branch to the relocated 0xc000 address early (still in real mode), to simplify subsequent branches. Have the virt mode handler avoid just 'windup' and redo the exception from scratch, rather than branching back to the trampoline. Rearrange the stack setup instruction location to match the system reset handler (e.g., right before EXCEPTION_PROLOG_COMMON). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc/64s/exception: hmi remove special case macroNicholas Piggin
No code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc/64s/exception: sreset move trampoline ahead of common codeNicholas Piggin
Follow convention and move tramp ahead of common. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc/64s/exception: optimise system_reset for idle, clean up non-idle caseNicholas Piggin
The idle wake up code in the system reset interrupt is not very optimal. There are two requirements: perform idle wake up quickly; and save everything including CFAR for non-idle interrupts, with no performance requirement. The problem with placing the idle test in the middle of the handler and using the normal handler code to save CFAR, is that it's quite costly (e.g., mfcfar is serialising, speculative workarounds get applied, SRR1 has to be reloaded, etc). It also prevents the standard interrupt handler boilerplate being used. This pain can be avoided by using a dedicated idle interrupt handler at the start of the interrupt handler, which restores all registers back to the way they were in case it was not an idle wake up. CFAR is preserved without saving it before the non-idle case by making that the fall-through, and idle is a taken branch. Performance seems to be in the noise, but possibly around 0.5% faster, the executed instructions certainly look better. The bigger benefit is being able to drop in standard interrupt handlers after the idle code, which helps with subsequent cleanup and consolidation. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fixup BE by using DOTSYM for idle_return_gpr_loss call] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove bad stack branchNicholas Piggin
The bad stack test in interrupt handlers has a few problems. For performance it is taken in the common case, which is a fetch bubble and a waste of i-cache. For code development and maintainence, it requires yet another stack frame setup routine, and that constrains all exception handlers to follow the same register save pattern which inhibits future optimisation. Remove the test/branch and replace it with a trap. Teach the program check handler to use the emergency stack for this case. This does not result in quite so nice a message, however the SRR0 and SRR1 of the crashed interrupt can be seen in r11 and r12, as is the original r1 (adjusted by INT_FRAME_SIZE). These are the most important parts to debugging the issue. The original r9-12 and cr0 is lost, which is the main downside. kernel BUG at linux/arch/powerpc/kernel/exceptions-64s.S:847! Oops: Exception in kernel mode, sig: 5 [#1] BE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted NIP: c000000000009108 LR: c000000000cadbcc CTR: c0000000000090f0 REGS: c0000000fffcbd70 TRAP: 0700 Not tainted MSR: 9000000000021032 <SF,HV,ME,IR,DR,RI> CR: 28222448 XER: 20040000 CFAR: c000000000009100 IRQMASK: 0 GPR00: 000000000000003d fffffffffffffd00 c0000000018cfb00 c0000000f02b3166 GPR04: fffffffffffffffd 0000000000000007 fffffffffffffffb 0000000000000030 GPR08: 0000000000000037 0000000028222448 0000000000000000 c000000000ca8de0 GPR12: 9000000002009032 c000000001ae0000 c000000000010a00 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c0000000f00322c0 c000000000f85200 0000000000000004 ffffffffffffffff GPR24: fffffffffffffffe 0000000000000000 0000000000000000 000000000000000a GPR28: 0000000000000000 0000000000000000 c0000000f02b391c c0000000f02b3167 NIP [c000000000009108] decrementer_common+0x18/0x160 LR [c000000000cadbcc] .vsnprintf+0x3ec/0x4f0 Call Trace: Instruction dump: 996d098a 994d098b 38610070 480246ed 48005518 60000000 38200000 718a4000 7c2a0b78 3821fd00 41c20008 e82d0970 <0981fd00> f92101a0 f9610170 f9810178 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/tm: update comment about interrupt re-entrancyNicholas Piggin
Since the system reset interrupt began to use its own stack, and machine check interrupts have done so for some time, r1 can be changed without clearing MSR[RI], provided no other interrupts (including SLB misses) are taken. MSR[RI] does have to be cleared when using SCRATCH0, however. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move SET_SCRATCH0 into EXCEPTION_PROLOG_0Nicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: denorm handler use standard scratch save macroNicholas Piggin
Although the 0x1500 interrupt only applies to bare metal, it is better to just use the standard macro for scratch save. Runtime code path remains unchanged (due to instruction patching). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: machine check use standard macros to save dar/dsisrNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: add dar and dsisr options to exception macroNicholas Piggin
Some exception entry requires DAR and/or DSISR to be saved into the paca exception save area. Add options to the standard exception macros for these. Generated code changes slightly due to code structure. - 554: a6 02 72 7d mfdsisr r11 - 558: a8 00 4d f9 std r10,168(r13) - 55c: b0 00 6d 91 stw r11,176(r13) + 554: a8 00 4d f9 std r10,168(r13) + 558: a6 02 52 7d mfdsisr r10 + 55c: b0 00 4d 91 stw r10,176(r13) Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: use common macro for windupNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: shuffle windup code aroundNicholas Piggin
Restore all SPRs and CR up-front, these are longer latency instructions. Move register restore around to maximise pairs of adjacent loads (e.g., restore r0 next to r1). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: simplify hmi windup codeNicholas Piggin
Duplicate the hmi windup code for both cases, rather than to put a special case branch in the middle of it. Remove unused label. This helps with later code consolidation. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move machine check windup in_mce handlingNicholas Piggin
Move in_mce decrement earlier before registers are restored (but still after RI=0). This helps with later consolidation. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: windup use r9 consistently to restore SPRsNicholas Piggin
Trivial code change, r3->r9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: mtmsrd L=1 cleanupNicholas Piggin
All supported 64s CPUs support mtmsrd L=1 instruction, so a cleanup can be made in sreset and mce handlers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: avoid SPR RAW scoreboard stall in real mode entryNicholas Piggin
Move SPR reads ahead of writes. Real mode entry that is not a KVM guest is rare these days, but bad practice propagates. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: clean up system call entryNicholas Piggin
syscall / hcall entry unnecessarily differs between KVM and non-KVM builds. Move the SMT priority instruction to the same location (after INTERRUPT_TO_KERNEL). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move paca save area offsets into exception-64s.SNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-03-20 19:27:07 +0000