| Age | Commit message (Collapse) | Author |
|---|
|
PPC_DEBUG_FEATURE_DATA_BP_ARCH_31 can be used to determine whether
we are running on an ISA 3.1 compliant machine. Which is needed to
determine DAR behaviour, 512 byte boundary limit etc. This was
requested by Pedro Miraglia Franco de Carvalho for extending
watchpoint features in gdb. Note that availability of 2nd DAWR is
independent of this flag and should be checked using
ppc_debug_info->num_data_bps.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-8-ravi.bangoria@linux.ibm.com
|
|
There are couple of places where we set len but not hw_len. For
ptrace/perf watchpoints, when CONFIG_HAVE_HW_BREAKPOINT=Y, hw_len
will be calculated and set internally while parsing watchpoint.
But when CONFIG_HAVE_HW_BREAKPOINT=N, we need to manually set
'hw_len'. Similarly for xmon as well, hw_len needs to be set
directly.
Fixes: b57aeab811db ("powerpc/watchpoint: Fix length calculation for unaligned target")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-7-ravi.bangoria@linux.ibm.com
|
|
On powerpc, ptrace watchpoint works in one-shot mode. i.e. kernel
disables event every time it fires and user has to re-enable it.
Also, in case of ptrace watchpoint, kernel notifies ptrace user
before executing instruction.
With CONFIG_HAVE_HW_BREAKPOINT=N, kernel is missing to disable
ptrace event and thus it's causing infinite loop of exceptions.
This is especially harmful when user watches on a data which is
also read/written by kernel, eg syscall parameters. In such case,
infinite exceptions happens in kernel mode which causes soft-lockup.
Fixes: 9422de3e953d ("powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-6-ravi.bangoria@linux.ibm.com
|
|
Power10 hw has multiple DAWRs but hw doesn't tell which DAWR caused
the exception. So we have a sw logic to detect that in hw_breakpoint.c.
But hw_breakpoint.c gets compiled only with CONFIG_HAVE_HW_BREAKPOINT=Y.
Move DAWR detection logic outside of hw_breakpoint.c so that it can be
reused when CONFIG_HAVE_HW_BREAKPOINT is not set.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-5-ravi.bangoria@linux.ibm.com
|
|
When kernel is compiled with CONFIG_HAVE_HW_BREAKPOINT=N, user can
still create watchpoint using PPC_PTRACE_SETHWDEBUG, with limited
functionalities. But, such watchpoints are never firing because of
the missing privilege settings. Fix that.
It's safe to set HW_BRK_TYPE_PRIV_ALL because we don't really leak
any kernel address in signal info. Setting HW_BRK_TYPE_PRIV_ALL will
also help to find scenarios when kernel accesses user memory.
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@linux.ibm.com>
Suggested-by: Pedro Miraglia Franco de Carvalho <pedromfc@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-4-ravi.bangoria@linux.ibm.com
|
|
Vector load/store instructions are special because they are always
aligned. Thus unaligned EA needs to be aligned down before comparing
it with watch ranges. Otherwise we might consider valid event as
invalid.
Fixes: 74c6881019b7 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-3-ravi.bangoria@linux.ibm.com
|
|
On p10 predecessors, watchpoint with quadword access is compared at
quadword length. If the watch range is doubleword or less than that
in a first half of quadword aligned 16 bytes, and if there is any
unaligned quadword access which will access only the 2nd half, the
handler should consider it as extraneous and emulate/single-step it
before continuing.
Fixes: 74c6881019b7 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-2-ravi.bangoria@linux.ibm.com
|
|
Bring in our fixes branch for this cycle which avoids some small
conflicts with upcoming commits.
|
|
Stop providing the possibility to override the address space using
set_fs() now that there is no need for that any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The ISA v3.1 the copy-paste facility has a new memory move functionality
which allows the copy buffer to be pasted to domestic memory (RAM) as
opposed to foreign memory (accelerator).
This means the POWER9 trick of avoiding the cp_abort on context switch if
the process had not mapped foreign memory does not work on POWER10. Do the
cp_abort unconditionally there.
KVM must also cp_abort on guest exit to prevent copy buffer state leaking
between contexts.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200825075535.224536-1-npiggin@gmail.com
|
|
It's not done anything for a long time. Save the percpu variable, and
emit a warning to remind users to not expect it to do anything.
This uses pr_warn_once instead of pr_warn_ratelimit as testing
'ppc64_cpu --smt=off' on a 24 core / 4 SMT system showed the warning
to be noisy, as the online/offline loop is slow.
Fixes: 3fa8cad82b94 ("powerpc/pseries/cpuidle: smt-snooze-delay cleanup.")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902000012.3440389-1-joel@jms.id.au
|
|
The last caller was removed in 2014 in commit fb5a515704d7 ("powerpc:
Remove platforms/wsp and associated pieces").
As Jordan noticed even though there are no callers, the code above in
fsl_secondary_thread_init() falls through into
generic_secondary_thread_init(). So we can remove the _GLOBAL but not
the body of the function.
However because fsl_secondary_thread_init() is inside #ifdef
CONFIG_PPC_BOOK3E, we can never reach the body of
generic_secondary_thread_init() unless CONFIG_PPC_BOOK3E is enabled,
so we can wrap the whole thing in a single #ifdef.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015704.1976364-1-mpe@ellerman.id.au
|
|
ftrace_graph_ret_addr() is always defined and returns 'ip' when
CONFIG_FUNCTION GRAPH_TRACER is not set.
So the #ifdef is not needed, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9d11143d4e27ba8274369a926968756917584868.1597643153.git.christophe.leroy@csgroup.eu
|
|
Use the generic kretprobe trampoline handler. Don't use
framepointer verification.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/159870610825.1229682.2090635992093223399.stgit@devnote2
|
|
There are 2 problems with it:
1. "<" vs expected "<<"
2. the shift number is an IOMMU page number mask, not an address
mask as the IOMMU page shift is missing.
This did not hit us before f1565c24b596 ("powerpc: use the generic
dma_ops_bypass mode") because we had additional code to handle bypass
mask so this chunk (almost?) never executed.However there were
reports that aacraid does not work with "iommu=nobypass".
After f1565c24b596, aacraid (and probably others which call
dma_get_required_mask() before setting the mask) was unable to enable
64bit DMA and fall back to using IOMMU which was known not to work,
one of the problems is double free of an IOMMU page.
This fixes DMA for aacraid, both with and without "iommu=nobypass" in
the kernel command line. Verified with "stress-ng -d 4".
Fixes: 6a5c7be5e484 ("powerpc: Override dma_get_required_mask by platform hook and ops")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ru
|
|
The vdso linker script is preprocessed on demand.
Adding it to 'targets' is enough to include the .cmd file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
|
|
We found that callers of dma_get_seg_boundary mostly do an ALIGN
with page mask and then do a page shift to get number of pages:
ALIGN(boundary + 1, 1 << shift) >> shift
However, the boundary might be as large as ULONG_MAX, which means
that a device has no specific boundary limit. So either "+ 1" or
passing it to ALIGN() would potentially overflow.
According to kernel defines:
#define ALIGN_MASK(x, mask) (((x) + (mask)) & ~(mask))
#define ALIGN(x, a) ALIGN_MASK(x, (typeof(x))(a) - 1)
We can simplify the logic here into a helper function doing:
ALIGN(boundary + 1, 1 << shift) >> shift
= ALIGN_MASK(b + 1, (1 << s) - 1) >> s
= {[b + 1 + (1 << s) - 1] & ~[(1 << s) - 1]} >> s
= [b + 1 + (1 << s) - 1] >> s
= [b + (1 << s)] >> s
= (b >> s) + 1
This patch introduces and applies dma_get_seg_boundary_nr_pages()
as an overflow-free helper for the dma_get_seg_boundary() callers
to get numbers of pages. It also takes care of the NULL dev case
for non-DMA API callers.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This reverts commit f2af201002a8bc22500c04cc474ea480bf361351.
It added a usage of cc-ldoption, but cc-ldoption was removed in commit
055efab3120b ("kbuild: drop support for cc-ldoption").
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Nothing prevents flush_cache_instruction() from being writen in C.
Do it to improve readability and maintainability.
This function is only use by low level callers, it is not
intended to be used by module. Don't export it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f989eff8296800c427622c0985384148404e4f0b.1597384512.git.christophe.leroy@csgroup.eu
|
|
Nothing prevents flush_cache_instruction() from being writen in C.
Do it to improve readability and maintainability.
This function is very small and isn't called from assembly,
make it static inline in asm/cacheflush.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/93d93fc69b4b3ad3ceba2fc0756333c0c0245bb7.1597384512.git.christophe.leroy@csgroup.eu
|
|
The only callers of flush_instruction_cache() are:
arch/powerpc/kernel/swsusp_booke.S: bl flush_instruction_cache
arch/powerpc/mm/nohash/40x.c: flush_instruction_cache();
arch/powerpc/mm/nohash/44x.c: flush_instruction_cache();
arch/powerpc/mm/nohash/fsl_booke.c: flush_instruction_cache();
arch/powerpc/platforms/44x/machine_check.c: flush_instruction_cache();
arch/powerpc/platforms/44x/machine_check.c: flush_instruction_cache();
This function is not used by book3s/32, drop it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/50098f49877cea0f46730a9df82dcabf84160e4b.1597384512.git.christophe.leroy@csgroup.eu
|
|
_nmask_and_or_msr() is only used at two places to set MSR_IP.
The SYNC is unnecessary as the users are not PowerPC 601.
Can be easily writen in C.
Do it, and drop _nmask_and_or_msr()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c2d2b8dfb8dd677026b26dffc8d31070c38a6b89.1597388079.git.christophe.leroy@csgroup.eu
|
|
Those two functions have been unused since commit identified below.
Drop them.
Fixes: 31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5641ada199b8dd2af16ad00a66084cf974f2704.1596716418.git.christophe.leroy@csgroup.eu
|
|
The assembler says:
arch/powerpc/kernel/head_32.S:1095: Warning: invalid register expression
It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.
Fix it to use a literal 0, the generated code is identical.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2b69ac8e1cddff6f808fc7415907179eab4aae9e.1596693679.git.christophe.leroy@csgroup.eu
|
|
The .comment section doesn't belong in STABS_DEBUG. Split it out into a
new macro named ELF_DETAILS. This will gain other non-debug sections
that need to be accounted for when linking with --orphan-handling=warn.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20200821194310.3089815-5-keescook@chromium.org
|
|
The recent commit 01eb01877f33 ("powerpc/64s: Fix restore_math
unnecessarily changing MSR") changed some of the handling of floating
point/vector restore.
In particular it caused current->thread.fpexc_mode to be copied into
the current MSR (via msr_check_and_set()), rather than just into
regs->msr (which is moved into MSR on return to userspace).
This can lead to a crash in the kernel if we take a floating point
exception when restoring FPSCR:
Oops: Exception in kernel mode, sig: 8 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf405cb-dirty #9
NIP: c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570
REGS: c0000016b7cfb3b0 TRAP: 0700 Not tainted (5.9.0-rc1-00098-g18445bf405cb-dirty)
MSR: 900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002444 XER: 00000000
CFAR: c00000000001a7a8 IRQMASK: 1
GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740
GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00
GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000
GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58
GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638
GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0
GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28
GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900
NIP load_fp_state+0x4/0x214
LR restore_math+0x17c/0x1f0
Call Trace:
0xc0000016b7cfb680 (unreliable)
__switch_to+0x330/0x460
__schedule+0x318/0x920
schedule+0x74/0x140
schedule_timeout+0x318/0x3f0
wait_for_completion+0xc8/0x210
call_usermodehelper_exec+0x234/0x280
do_coredump+0xedc/0x13c0
get_signal+0x1d4/0xbe0
do_notify_resume+0x1a0/0x490
interrupt_exit_user_prepare+0x1c4/0x230
interrupt_return+0x14/0x1c0
Instruction dump:
ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4
782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e> 48000088 c8030000 c8230010
Fix it by only loading the fpexc_mode value into regs->msr.
Also add a comment to explain that although VSX is subject to the
value of fpexc_mode, we don't have to handle that separately because
we only allow VSX to be enabled if FP is also enabled.
Fixes: 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR")
Reported-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20200825093424.3967813-1-mpe@ellerman.id.au
|
|
Kernel entry sets PPR to HMT_MEDIUM by convention. The scv entry
path missed this.
Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200825075309.224184-1-npiggin@gmail.com
|
|
Fix gcc '-Wunused-but-set-variable' warning:
arch/powerpc/kernel/fadump.c: In function fadump_update_elfcore_header:
arch/powerpc/kernel/fadump.c:790:17: warning: variable elf set but not used [-Wunused-but-set-variable]
It is introduced by commit ebaeb5ae2437 ("fadump:
Convert firmware-assisted cpu state dump data into elf notes."),
but never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-2-git-send-email-zhengbin13@huawei.com
|
|
This reverts commit 5c9fa16e8abd342ce04dc830c1ebb2a03abf6c05.
Since PROT_SAO can still be useful for certain classes of software,
reintroduce it. Concerns about guest migration for LPARs using SAO
will be addressed next.
Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io
|
|
__machine_check_early_realmode_p*() are currently declared as extern
in cputable.c and because of this when compiled with "C=1" (which
enables semantic checker) produces these warnings.
CHECK arch/powerpc/kernel/mce_power.c
arch/powerpc/kernel/mce_power.c:709:6: warning: symbol '__machine_check_early_realmode_p7' was not declared. Should it be static?
arch/powerpc/kernel/mce_power.c:717:6: warning: symbol '__machine_check_early_realmode_p8' was not declared. Should it be static?
arch/powerpc/kernel/mce_power.c:722:6: warning: symbol '__machine_check_early_realmode_p9' was not declared. Should it be static?
arch/powerpc/kernel/mce_power.c:740:6: warning: symbol '__machine_check_early_realmode_p10' was not declared. Should it be static?
Patch here moves the declaration to asm/mce.h and includes the same in
cputable.c
Fixes: ae744f3432d3 ("powerpc/book3s: Flush SLB/TLBs if we get SLB/TLB machine check errors on power8")
Fixes: 7b9f71f974a1 ("powerpc/64s: POWER9 machine check handler")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200817005618.3305028-1-maddy@linux.ibm.com
|
|
Add a raw mode cputable entry for POWER10. Copies most of the fields
from commit a3ea40d5c736 ("powerpc: Add POWER10 architected mode")
except for oprofile_cpu_type, machine_check_early, pvr_mask and
pvr_mask fields. On bare metal systems we use DT CPU features, which
doesn't need a cputable entry. But in VMs we still rely on the raw
cputable entry to set the correct values for the PMU related fields.
Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Reorder vs cleanup patch and add Fixes tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200817005618.3305028-2-maddy@linux.ibm.com
|
|
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8.
Bit 12 is set for SMT4.
Without this patch, /proc/cpuinfo on a SMT4 DD1 POWER10 looks like
this:
cpu : POWER10, altivec supported
revision : 17.0 (pvr 0080 1100)
Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode")
Cc: stable@vger.kernel.org # v5.8
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803035600.1820371-1-mikey@neuling.org
|
|
Patch series "iomap: Constify ioreadX() iomem argument", v3.
The ioread8/16/32() and others have inconsistent interface among the
architectures: some taking address as const, some not.
It seems there is nothing really stopping all of them to take pointer to
const.
This patch (of 4):
The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On
some architectures void *__iomem address argument is a pointer to const,
on some not.
Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
[krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()]
Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org
[akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c]
Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.com
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org
Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 61a47c1ad3a4dc ("sysctl: Remove the sysctl system call"),
sys_sysctl is actually unavailable: any input can only return an error.
We have been warning about people using the sysctl system call for years
and believe there are no more users. Even if there are users of this
interface if they have not complained or fixed their code by now they
probably are not going to, so there is no point in warning them any
longer.
So completely remove sys_sysctl on all architectures.
[nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu]
Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will@kernel.org> [arm/arm64]
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: chenzefeng <chenzefeng2@huawei.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Diego Elio Pettenò <flameeyes@flameeyes.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paulburton@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Fix pci_cfg_wait queue locking problem (Bjorn Helgaas)
- Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi
Saheed)
- Align PCIe capability and PCI accessor return values (Bolarinwa
Olayemi Saheed)
- Fix pci_create_slot() reference count leak (Qiushi Wu)
- Announce device after early fixups (Tiezhu Yang)
PCI device hotplug:
- Make rpadlpar functions static (Wei Yongjun)
Driver binding:
- Add device even if driver attach failed (Rajat Jain)
Virtualization:
- xen: Remove redundant initialization of irq (Colin Ian King)
IOMMU:
- Add pci_pri_supported() to check device or associated PF (Ashok Raj)
- Release IVRS table in AMD ACS quirk (Hanjun Guo)
- Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng)
- Treat "external-facing" devices themselves as internal (Rajat Jain)
MSI:
- Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr
Stankiewicz)
Error handling:
- Clear PCIe Device Status errors only if OS owns AER (Jonathan
Cameron)
- Log correctable errors as warning, not error (Matt Jolly)
- Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc
Van Oostenryck)
Peer-to-peer DMA:
- Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe)
ASPM:
- Add missing newline in sysfs 'policy' (Xiongfeng Wang)
Native PCIe controllers:
- Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng)
- Convert to devm_platform_ioremap_resource() (Dejin Zheng)
- Remove duplicate error message from devm_pci_remap_cfg_resource()
callers (Dejin Zheng)
- Fix runtime PM imbalance on error (Dinghao Liu)
- Remove dev_err() when handing an error from platform_get_irq()
(Krzysztof Wilczyński)
- Use pci_host_bridge.windows list directly instead of splicing in a
temporary list for cadence, mvebu, host-common (Rob Herring)
- Use pci_host_probe() instead of open-coding all the pieces for
altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3,
versatile, xgene, xilinx, xilinx-nwl (Rob Herring)
- Default host bridge parent device to the platform device (Rob
Herring)
- Use pci_is_root_bus() instead of tracking root bus number
separately in aardvark, designware (imx6, keystone,
designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob
Herring)
- Set host bridge bus number in pci_scan_root_bus_bridge() instead of
each driver for aardvark, designware-host, host-common, mediatek,
rcar, tegra, v3-semi (Rob Herring)
- Move DT resource setup into devm_pci_alloc_host_bridge() (Rob
Herring)
- Set bridge map_irq and swizzle_irq to default functions; drivers
that don't support legacy IRQs (iproc) need to undo this (Rob
Herring)
ARM Versatile PCIe controller driver:
- Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring)
Cadence PCIe controller driver:
- Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
(Kishon Vijay Abraham I)
- Remove "mem" from reg binding (Kishon Vijay Abraham I)
- Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I)
- Convert all r/w accessors to perform only 32-bit accesses (Kishon
Vijay Abraham I)
- Add support to start link and verify link status (Kishon Vijay
Abraham I)
- Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I)
- Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I)
- Fix updating Vendor ID and Subsystem Vendor ID register (Kishon
Vijay Abraham I)
- Use bridge resources for outbound window setup (Rob Herring)
- Remove private bus number and range storage (Rob Herring)
Cadence PCIe endpoint driver:
- Add MSI-X support (Alan Douglas)
HiSilicon PCIe controller driver:
- Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring)
Intel VMD host bridge driver:
- Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick)
Loongson PCIe controller driver:
- Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang)
Marvell Aardvark PCIe controller driver:
- Indicate error in 'val' when config read fails (Pali Rohár)
- Don't touch PCIe registers if no card connected (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Setup BAR0 in order to fix MSI (Shmuel Hazan)
Microsoft Hyper-V host bridge driver:
- Fix a timing issue which causes kdump to fail occasionally (Wei Hu)
- Make some functions static (Wei Yongjun)
NVIDIA Tegra PCIe controller driver:
- Revert tegra124 raw_violation_fixup (Nicolas Chauvet)
- Remove PLL power supplies (Thierry Reding)
Qualcomm PCIe controller driver:
- Change duplicate PCI reset to phy reset (Abhishek Sahu)
- Add missing ipq806x clocks in PCIe driver (Ansuel Smith)
- Add missing reset for ipq806x (Ansuel Smith)
- Add ext reset (Ansuel Smith)
- Use bulk clk API and assert on error (Ansuel Smith)
- Add support for tx term offset for rev 2.1.0 (Ansuel Smith)
- Define some PARF params needed for ipq8064 SoC (Ansuel Smith)
- Add ipq8064 rev2 variant (Ansuel Smith)
- Support PCI speed set for ipq806x (Sham Muthayyan)
Renesas R-Car PCIe controller driver:
- Use devm_pci_alloc_host_bridge() (Rob Herring)
- Use struct pci_host_bridge.windows list directly (Rob Herring)
- Convert rcar-gen2 to use modern host bridge probe functions (Rob
Herring)
TI J721E PCIe driver:
- Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I)
Xilinx Versal CPM PCIe controller driver:
- Add Versal CPM Root Port driver and YAML schema (Bharat Kumar
Gogada)
MicroSemi Switchtec management driver:
- Add missing __iomem and __user tags to fix sparse warnings (Logan
Gunthorpe)
Miscellaneous:
- Replace http:// links with https:// (Alexander A. Klimov)
- Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn
Helgaas)
- Remove unused pci_lost_interrupt() (Heiner Kallweit)
- Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen)
- Fix kerneldoc warnings (Krzysztof Kozlowski)"
* tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
PCI: Fix kerneldoc warnings
PCI: xilinx-cpm: Add Versal CPM Root Port driver
PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port
PCI: Set bridge map_irq and swizzle_irq to default functions
PCI: Move DT resource setup into devm_pci_alloc_host_bridge()
PCI: rcar-gen2: Convert to use modern host bridge probe functions
PCI: Remove dev_err() when handing an error from platform_get_irq()
MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
misc: pci_endpoint_test: Add J721E in pci_device_id table
PCI: j721e: Add TI J721E PCIe driver
PCI: switchtec: Add missing __iomem tag to fix sparse warnings
PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings
PCI: rpadlpar: Make functions static
PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs
PCI: Release IVRS table in AMD ACS quirk
PCI: Announce device after early fixups
PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken
PCI: Remove unused pci_lost_interrupt()
dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
...
|
|
The merge resolution in commit 25d8d4eecace left ret no longer used,
leading to:
arch/powerpc/kernel/ptrace/ptrace-view.c: In function ‘pkey_get’:
arch/powerpc/kernel/ptrace/ptrace-view.c:473:6: error: unused variable ‘ret’
473 | int ret;
Fix it by removing ret.
Fixes: 25d8d4eecace ("Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ptrace regset updates from Al Viro:
"Internal regset API changes:
- regularize copy_regset_{to,from}_user() callers
- switch to saner calling conventions for ->get()
- kill user_regset_copyout()
The ->put() side of things will have to wait for the next cycle,
unfortunately.
The balance is about -1KLoC and replacements for ->get() instances are
a lot saner"
* 'work.regset' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
regset: kill user_regset_copyout{,_zero}()
regset(): kill ->get_size()
regset: kill ->get()
csky: switch to ->regset_get()
xtensa: switch to ->regset_get()
parisc: switch to ->regset_get()
nds32: switch to ->regset_get()
nios2: switch to ->regset_get()
hexagon: switch to ->regset_get()
h8300: switch to ->regset_get()
openrisc: switch to ->regset_get()
riscv: switch to ->regset_get()
c6x: switch to ->regset_get()
ia64: switch to ->regset_get()
arc: switch to ->regset_get()
arm: switch to ->regset_get()
sh: convert to ->regset_get()
arm64: switch to ->regset_get()
mips: switch to ->regset_get()
sparc: switch to ->regset_get()
...
|
|
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
* tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: cleanup dma_alloc_contiguous
dma-debug: use named initializers for dir2name
powerpc: use the generic dma_ops_bypass mode
dma-mapping: add a dma_ops_bypass flag to struct device
dma-mapping: make support for dma ops optional
dma-mapping: inline the fast path dma-direct calls
dma-mapping: move the remaining DMA API calls out of line
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull close_range() implementation from Christian Brauner:
"This adds the close_range() syscall. It allows to efficiently close a
range of file descriptors up to all file descriptors of a calling
task.
This is coordinated with the FreeBSD folks which have copied our
version of this syscall and in the meantime have already merged it in
April 2019:
https://reviews.freebsd.org/D21627
https://svnweb.freebsd.org/base?view=revision&revision=359836
The syscall originally came up in a discussion around the new mount
API and making new file descriptor types cloexec by default. During
this discussion, Al suggested the close_range() syscall.
First, it helps to close all file descriptors of an exec()ing task.
This can be done safely via (quoting Al's example from [1] verbatim):
/* that exec is sensitive */
unshare(CLONE_FILES);
/* we don't want anything past stderr here */
close_range(3, ~0U);
execve(....);
The code snippet above is one way of working around the problem that
file descriptors are not cloexec by default. This is aggravated by the
fact that we can't just switch them over without massively regressing
userspace. For a whole class of programs having an in-kernel method of
closing all file descriptors is very helpful (e.g. demons, service
managers, programming language standard libraries, container managers
etc.).
Second, it allows userspace to avoid implementing closing all file
descriptors by parsing through /proc/<pid>/fd/* and calling close() on
each file descriptor and other hacks. From looking at various
large(ish) userspace code bases this or similar patterns are very
common in service managers, container runtimes, and programming
language runtimes/standard libraries such as Python or Rust.
In addition, the syscall will also work for tasks that do not have
procfs mounted and on kernels that do not have procfs support compiled
in. In such situations the only way to make sure that all file
descriptors are closed is to call close() on each file descriptor up
to UINT_MAX or RLIMIT_NOFILE, OPEN_MAX trickery.
Based on Linus' suggestion close_range() also comes with a new flag
CLOSE_RANGE_UNSHARE to more elegantly handle file descriptor dropping
right before exec. This would usually be expressed in the sequence:
unshare(CLONE_FILES);
close_range(3, ~0U);
as pointed out by Linus it might be desirable to have this be a part
of close_range() itself under a new flag CLOSE_RANGE_UNSHARE which
gets especially handy when we're closing all file descriptors above a
certain threshold.
Test-suite as always included"
* tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add CLOSE_RANGE_UNSHARE tests
close_range: add CLOSE_RANGE_UNSHARE
tests: add close_range() tests
arch: wire-up close_range()
open: add close_range()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fork cleanups from Christian Brauner:
"This is cleanup series from when we reworked a chunk of the process
creation paths in the kernel and switched to struct
{kernel_}clone_args.
High-level this does two main things:
- Remove the double export of both do_fork() and _do_fork() where
do_fork() used the incosistent legacy clone calling convention.
Now we only export _do_fork() which is based on struct
kernel_clone_args.
- Remove the copy_thread_tls()/copy_thread() split making the
architecture specific HAVE_COYP_THREAD_TLS config option obsolete.
This switches all remaining architectures to select
HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling
convention. The current split makes the process creation codepaths
more convoluted than they need to be. Each architecture has their own
copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it
has a copy_thread_tls() function.
The split is not needed anymore nowadays, all architectures support
CLONE_SETTLS but quite a few of them never bothered to select
HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread()
and use the old calling convention. Removing this split cleans up the
process creation codepaths and paves the way for implementing clone3()
on such architectures since it requires the copy_thread_tls() calling
convention.
After having made each architectures support copy_thread_tls() this
series simply renames that function back to copy_thread(). It also
switches all architectures that call do_fork() directly over to
_do_fork() and the struct kernel_clone_args calling convention. This
is a corollary of switching the architectures that did not yet support
it over to copy_thread_tls() since do_fork() is conditional on not
supporting copy_thread_tls() (Mostly because it lacks a separate
argument for tls which is trivial to fix but there's no need for this
function to exist.).
The do_fork() removal is in itself already useful as it allows to to
remove the export of both do_fork() and _do_fork() we currently have
in favor of only _do_fork(). This has already been discussed back when
we added clone3(). The legacy clone() calling convention is - as is
probably well-known - somewhat odd:
#
# ABI hall of shame
#
config CLONE_BACKWARDS
config CLONE_BACKWARDS2
config CLONE_BACKWARDS3
that is aggravated by the fact that some architectures such as sparc
follow the CLONE_BACKWARDSx calling convention but don't really select
the corresponding config option since they call do_fork() directly.
So do_fork() enforces a somewhat arbitrary calling convention in the
first place that doesn't really help the individual architectures that
deviate from it. They can thus simply be switched to _do_fork()
enforcing a single calling convention. (I really hope that any new
architectures will __not__ try to implement their own calling
conventions...)
Most architectures already have made a similar switch (m68k comes to
mind).
Overall this removes more code than it adds even with a good portion
of added comments. It simplifies a chunk of arch specific assembly
either by moving the code into C or by simply rewriting the assembly.
Architectures that have been touched in non-trivial ways have all been
actually boot and stress tested: sparc and ia64 have been tested with
Debian 9 images. They are the two architectures which have been
touched the most. All non-trivial changes to architectures have seen
acks from the relevant maintainers. nios2 with a custom built
buildroot image. h8300 I couldn't get something bootable to test on
but the changes have been fairly automatic and I'm sure we'll hear
people yell if I broke something there.
All other architectures that have been touched in trivial ways have
been compile tested for each single patch of the series via git rebase
-x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested
even though they have just been trivially touched (removal of the
HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are
basically "core architectures" and since it is trivial to get your
hands on a useable image"
* tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
arch: rename copy_thread_tls() back to copy_thread()
arch: remove HAVE_COPY_THREAD_TLS
unicore: switch to copy_thread_tls()
sh: switch to copy_thread_tls()
nds32: switch to copy_thread_tls()
microblaze: switch to copy_thread_tls()
hexagon: switch to copy_thread_tls()
c6x: switch to copy_thread_tls()
alpha: switch to copy_thread_tls()
fork: remove do_fork()
h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
sparc: unconditionally enable HAVE_COPY_THREAD_TLS
sparc: share process creation helpers between sparc and sparc64
sparc64: enable HAVE_COPY_THREAD_TLS
fork: fold legacy_clone_args_valid() into _do_fork()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- LKMM updates: mostly documentation changes, but also some new litmus
tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all
fixes in place to support KCSAN, so GCC support can be enabled again.
Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the
'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>,
decouple lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
kcsan: Improve IRQ state trace reporting
lockdep: Refactor IRQ trace events fields into struct
seqlock: lockdep assert non-preemptibility on seqcount_t write
lockdep: Add preemption enabled/disabled assertion APIs
seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
seqlock: Reorder seqcount_t and seqlock_t API definitions
seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
seqlock: Properly format kernel-doc code samples
Documentation: locking: Describe seqlock design and usage
locking/qspinlock: Do not include atomic.h from qspinlock_types.h
locking/atomic: Move ATOMIC_INIT into linux/types.h
lockdep: Move list.h inclusion into lockdep.h
locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
futex: Remove unused or redundant includes
futex: Consistently use fshared as boolean
futex: Remove needless goto's
futex: Remove put_futex_key()
rwsem: fix commas in initialisation
docs: locking: Replace HTTP links with HTTPS ones
...
|
|
The assembler says:
arch/powerpc/kernel/head_40x.S:623: Warning: invalid register expression
It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.
Fix it to use a literal 0, the generated code is identical.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722022422.825197-1-mpe@ellerman.id.au
|
|
Resolved kernel/bpf/btf.c using instructions from merge commit
69138b34a7248d2396ab85c8652e20c0c39beaba
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This can catch cases where the device tree has gotten mishandled into
an inconsistent state at runtime, e.g. the cache nodes for both the
source and the destination are present after a migration.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-5-nathanl@linux.ibm.com
|
|
If we have a bug which causes us to start with the wrong kind of OF
node when linking up the cache tree, it's helpful for debugging to
print information about what we found vs what we expected. So replace
uses of WARN_ON_ONCE with WARN_ONCE, which lets us include an
informative message instead of a contentless backtrace.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-4-nathanl@linux.ibm.com
|
|
We know that every OF node we deal with in this code is under /cpus,
so we can make the debug messages a little less verbose without losing
information.
E.g.
cacheinfo: creating L1 dcache and icache for /cpus/PowerPC,POWER8@0
cacheinfo: creating L2 ucache for /cpus/l2-cache@2006
cacheinfo: creating L3 ucache for /cpus/l3-cache@3106
becomes
cacheinfo: creating L1 dcache and icache for PowerPC,POWER8@0
cacheinfo: creating L2 ucache for l2-cache@2006
cacheinfo: creating L3 ucache for l3-cache@3106
Replace all '%pOF' specifiers with '%pOFP'.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-3-nathanl@linux.ibm.com
|
|
Set pr_fmt() so we get a nice prefix on messages.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-2-nathanl@linux.ibm.com
|
