summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel
AgeCommit message (Collapse)Author
2021-11-01powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TESTChristophe Leroy
Until now, all tests involving CONFIG_STRICT_KERNEL_RWX were done with DEBUG_RODATA_TEST to check the result. But now that CONFIG_STRICT_KERNEL_RWX is selected by default, it came without CONFIG_DEBUG_RODATA_TEST and led to the following Oops [ 6.830908] Freeing unused kernel image (initmem) memory: 352K [ 6.840077] BUG: Unable to handle kernel data access on write at 0xc1285200 [ 6.846836] Faulting instruction address: 0xc0004b6c [ 6.851745] Oops: Kernel access of bad area, sig: 11 [#1] [ 6.857075] BE PAGE_SIZE=16K PREEMPT CMPC885 [ 6.861348] SAF3000 DIE NOTIFICATION [ 6.864830] CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0-rc5-s3k-dev-02255-g2747d7b7916f #451 [ 6.873429] NIP: c0004b6c LR: c0004b60 CTR: 00000000 [ 6.878419] REGS: c902be60 TRAP: 0300 Not tainted (5.15.0-rc5-s3k-dev-02255-g2747d7b7916f) [ 6.886852] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 53000335 XER: 8000ff40 [ 6.893564] DAR: c1285200 DSISR: 82000000 [ 6.893564] GPR00: 0c000000 c902bf20 c20f4000 08000000 00000001 04001f00 c1800000 00000035 [ 6.893564] GPR08: ff0001ff c1280000 00000002 c0004b60 00001000 00000000 c0004b1c 00000000 [ 6.893564] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 6.893564] GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c1060000 [ 6.932034] NIP [c0004b6c] kernel_init+0x50/0x138 [ 6.936682] LR [c0004b60] kernel_init+0x44/0x138 [ 6.941245] Call Trace: [ 6.943653] [c902bf20] [c0004b60] kernel_init+0x44/0x138 (unreliable) [ 6.950022] [c902bf30] [c001122c] ret_from_kernel_thread+0x5c/0x64 [ 6.956135] Instruction dump: [ 6.959060] 48ffc521 48045469 4800d8cd 3d20c086 89295fa0 2c090000 41820058 480796c9 [ 6.966890] 4800e48d 3d20c128 39400002 3fe0c106 <91495200> 3bff8000 4806fa1d 481f7d75 [ 6.974902] ---[ end trace 1e397bacba4aa610 ]--- 0xc1285200 corresponds to 'system_state' global var that the kernel is trying to set to SYSTEM_RUNNING. This var is above the RO/RW limit so it shouldn't Oops. It oopses because the dirty bit is missing. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3d5800b0bbcd7b19761b98f50421358667b45331.1635520232.git.christophe.leroy@csgroup.eu
2021-10-29signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)Eric W. Biederman
Now that force_fatal_sig exists it is unnecessary and a bit confusing to use force_sigsegv in cases where the simpler force_fatal_sig is wanted. So change every instance we can to make the code clearer. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-29powerpc/32e: Ignore ESR in instruction storage interrupt handlerNicholas Piggin
A e5500 machine running a 32-bit kernel sometimes hangs at boot, seemingly going into an infinite loop of instruction storage interrupts. The ESR (Exception Syndrome Register) has a value of 0x800000 (store) when this happens, which is likely set by a previous store. An instruction TLB miss interrupt would then leave ESR unchanged, and if no PTE exists it calls directly to the instruction storage interrupt handler without changing ESR. access_error() does not cause a segfault due to a store to a read-only vma because is_exec is true. Most subsequent fault handling does not check for a write fault on a read-only vma, and might do strange things like create a writeable PTE or call page_mkwrite on a read only vma or file. It's not clear what happens here to cause the infinite faulting in this case, a fault handler failure or low level PTE or TLB handling. In any case this can be fixed by having the instruction storage interrupt zero regs->dsisr rather than storing the ESR value to it. Fixes: a01a3f2ddbcd ("powerpc: remove arguments from fault handler functions") Cc: stable@vger.kernel.org # v5.12+ Reported-by: Jacques de Laval <jacques.delaval@protonmail.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Jacques de Laval <jacques.delaval@protonmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211028133043.4159501-1-npiggin@gmail.com
2021-10-27ftrace: disable preemption when recursion locked王贇
As the documentation explained, ftrace_test_recursion_trylock() and ftrace_test_recursion_unlock() were supposed to disable and enable preemption properly, however currently this work is done outside of the function, which could be missing by mistake. And since the internal using of trace_test_and_set_recursion() and trace_clear_recursion() also require preemption disabled, we can just merge the logical. This patch will make sure the preemption has been disabled when trace_test_and_set_recursion() return bit >= 0, and trace_clear_recursion() will enable the preemption if previously enabled. Link: https://lkml.kernel.org/r/13bde807-779c-aa4c-0672-20515ae365ea@linux.alibaba.com CC: Petr Mladek <pmladek@suse.com> Cc: Guo Ren <guoren@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Jisheng Zhang <jszhang@kernel.org> CC: Steven Rostedt <rostedt@goodmis.org> CC: Miroslav Benes <mbenes@suse.cz> Reported-by: Abaci <abaci@linux.alibaba.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> [ Removed extra line in comment - SDR ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-27powerpc/64s/interrupt: Fix check_return_regs_valid() false positiveNicholas Piggin
The check_return_regs_valid() can cause a false positive if the return regs are marked as norestart and they are an HSRR type interrupt, because the low bit in the bottom of regs->trap causes interrupt type matching to fail. This can occcur for example on bare metal with a HV privileged doorbell interrupt that causes a signal, but do_signal returns early because get_signal() fails, and takes the "No signal to deliver" path. In this case no signal was delivered so the return location is not changed so return SRRs are not invalidated, yet set_trap_norestart is called, which messes up the match. Building go-1.16.6 is known to reproduce this. Fix it by using the TRAP() accessor which masks out the low bit. Fixes: 6eaaf9de3599 ("powerpc/64s/interrupt: Check and fix srr_valid without crashing") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211026122531.3599918-1-npiggin@gmail.com
2021-10-27Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC"Michael Ellerman
This reverts commit 566af8cda399c088763d07464463dc871c943b54. This caused some conflicts vs the audit tree, and the audit maintainers would prefer we postpone this to the next merge window so we have more time for testing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-10-25signal/powerpc: On swapcontext failure force SIGSEGVEric W. Biederman
If the register state may be partial and corrupted instead of calling do_exit, call force_sigsegv(SIGSEGV). Which properly kills the process with SIGSEGV and does not let any more userspace code execute, instead of just killing one thread of the process and potentially confusing everything. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: 756f1ae8a44e ("PPC32: Rework signal code and add a swapcontext system call.") Fixes: 04879b04bf50 ("[PATCH] ppc64: VMX (Altivec) support & signal32 rework, from Ben Herrenschmidt") Link: https://lkml.kernel.org/r/20211020174406.17889-7-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-10-22powerpc/breakpoint: CleanupChristophe Leroy
cache_op_size() does exactly the same as l1_dcache_bytes(). Remove it. MSR_64BIT already exists, no need to enclode the check around #ifdef __powerpc64__ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6184b08088312a7d787d450eb902584e4ae77f7a.1632317816.git.christophe.leroy@csgroup.eu
2021-10-22powerpc: warn on emulation of dcbz instruction in kernel modeChristophe Leroy
dcbz instruction shouldn't be used on non-cached memory. Using it on non-cached memory can result in alignment exception and implies a heavy handling. Instead of silentely emulating the instruction and resulting in high performance degradation, warn whenever an alignment exception is taken in kernel mode due to dcbz, so that the user is made aware that dcbz instruction has been used unexpectedly by the kernel. Reported-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2e3acfe63d289c6fba366e16973c9ab8369e8b75.1631803922.git.christophe.leroy@csgroup.eu
2021-10-22powerpc/32: Add support for out-of-line static callsChristophe Leroy
Add support for out-of-line static calls on PPC32. This change improve performance of calls to global function pointers by using direct calls instead of indirect calls. The trampoline is initialy populated with a 'blr' or branch to target, followed by an unreachable long jump sequence. In order to cater with parallele execution, the trampoline needs to be updated in a way that ensures it remains consistent at all time. This means we can't use the traditional lis/addi to load r12 with the target address, otherwise there would be a window during which the first instruction contains the upper part of the new target address while the second instruction still contains the lower part of the old target address. To avoid that the target address is stored just after the 'bctr' and loaded from there with a single instruction. Then, depending on the target distance, arch_static_call_transform() will either replace the first instruction by a direct 'bl <target>' or 'nop' in order to have the trampoline fall through the long jump sequence. For the special case of __static_call_return0(), to avoid the risk of a far branch, a version of it is inlined at the end of the trampoline. Performancewise the long jump sequence is probably not better than the indirect calls set by GCC when we don't use static calls, but such calls are unlikely to be required on powerpc32: With most configurations the kernel size is far below 32 Mbytes so only modules may happen to be too far. And even modules are likely to be close enough as they are allocated below the kernel core and as close as possible of the kernel text. static_call selftest is running successfully with this change. With this patch, __do_irq() has the following sequence to trace irq entries: c0004a00 <__SCT__tp_func_irq_entry>: c0004a00: 48 00 00 e0 b c0004ae0 <__traceiter_irq_entry> c0004a04: 3d 80 c0 00 lis r12,-16384 c0004a08: 81 8c 4a 1c lwz r12,18972(r12) c0004a0c: 7d 89 03 a6 mtctr r12 c0004a10: 4e 80 04 20 bctr c0004a14: 38 60 00 00 li r3,0 c0004a18: 4e 80 00 20 blr c0004a1c: 00 00 00 00 .long 0x0 ... c0005654 <__do_irq>: ... c0005664: 7c 7f 1b 78 mr r31,r3 ... c00056a0: 81 22 00 00 lwz r9,0(r2) c00056a4: 39 29 00 01 addi r9,r9,1 c00056a8: 91 22 00 00 stw r9,0(r2) c00056ac: 3d 20 c0 af lis r9,-16209 c00056b0: 81 29 74 cc lwz r9,29900(r9) c00056b4: 2c 09 00 00 cmpwi r9,0 c00056b8: 41 82 00 10 beq c00056c8 <__do_irq+0x74> c00056bc: 80 69 00 04 lwz r3,4(r9) c00056c0: 7f e4 fb 78 mr r4,r31 c00056c4: 4b ff f3 3d bl c0004a00 <__SCT__tp_func_irq_entry> Before this patch, __do_irq() was doing the following to trace irq entries: c0005700 <__do_irq>: ... c0005710: 7c 7e 1b 78 mr r30,r3 ... c000574c: 93 e1 00 0c stw r31,12(r1) c0005750: 81 22 00 00 lwz r9,0(r2) c0005754: 39 29 00 01 addi r9,r9,1 c0005758: 91 22 00 00 stw r9,0(r2) c000575c: 3d 20 c0 af lis r9,-16209 c0005760: 83 e9 f4 cc lwz r31,-2868(r9) c0005764: 2c 1f 00 00 cmpwi r31,0 c0005768: 41 82 00 24 beq c000578c <__do_irq+0x8c> c000576c: 81 3f 00 00 lwz r9,0(r31) c0005770: 80 7f 00 04 lwz r3,4(r31) c0005774: 7d 29 03 a6 mtctr r9 c0005778: 7f c4 f3 78 mr r4,r30 c000577c: 4e 80 04 21 bctrl c0005780: 85 3f 00 0c lwzu r9,12(r31) c0005784: 2c 09 00 00 cmpwi r9,0 c0005788: 40 82 ff e4 bne c000576c <__do_irq+0x6c> Behind the fact of now using a direct 'bl' instead of a 'load/mtctr/bctr' sequence, we can also see that we get one less register on the stack. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6ec2a7865ed6a5ec54ab46d026785bafe1d837ea.1630484892.git.christophe.leroy@csgroup.eu
2021-10-22powerpc/machdep: Remove stale functions from ppc_md structureChristophe Leroy
ppc_md.iommu_save() is not set anymore by any platform after commit c40785ad305b ("powerpc/dart: Use a cachable DART"). So iommu_save() has become a nop and can be removed. ppc_md.show_percpuinfo() is not set anymore by any platform after commit 4350147a816b ("[PATCH] ppc64: SMU based macs cpufreq support"). Last users of ppc_md.rtc_read_val() and ppc_md.rtc_write_val() were removed by commit 0f03a43b8f0f ("[POWERPC] Remove todc code from ARCH=powerpc") Last user of kgdb_map_scc() was removed by commit 17ce452f7ea3 ("kgdb, powerpc: arch specific powerpc kgdb support"). ppc.machine_kexec_prepare() has not been used since commit 8ee3e0d69623 ("powerpc: Remove the main legacy iSerie platform code"). This allows the removal of machine_kexec_prepare() and the rename of default_machine_kexec_prepare() into machine_kexec_prepare() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Daniel Axtens <dja@axtens.net> [mpe: Drop prototype for default_machine_kexec_prepare() as noted by dja] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/24d4ca0ada683c9436a5f812a7aeb0a1362afa2b.1630398606.git.christophe.leroy@csgroup.eu
2021-10-22powerpc/time: Remove generic_suspend_{dis/en}able_irqs()Christophe Leroy
Commit d75d68cfef49 ("powerpc: Clean up obsolete code relating to decrementer and timebase") made generic_suspend_enable_irqs() and generic_suspend_disable_irqs() static. Fold them into their only caller. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c3f9ec9950394ef939014f7934268e6ee30ca04f.1630398566.git.christophe.leroy@csgroup.eu
2021-10-22powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERICChristophe Leroy
Commit e65e1fc2d24b ("[PATCH] syscall class hookup for all normal targets") added generic support for AUDIT but that didn't include support for bi-arch like powerpc. Commit 4b58841149dc ("audit: Add generic compat syscall support") added generic support for bi-arch. Convert powerpc to that bi-arch generic audit support. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a4b3951d1191d4183d92a07a6097566bde60d00a.1629812058.git.christophe.leroy@csgroup.eu
2021-10-21Merge tag 'powerpc-5.15-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a bug exposed by a previous fix, where running guests with certain SMT topologies could crash the host on Power8. - Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is enabled. Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider. * tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/smp: do not decrement idle task preempt count in CPU offline powerpc/idle: Don't corrupt back chain when going idle
2021-10-20powerpc: Use of_get_cpu_hwid()Rob Herring
Replace open coded parsing of CPU nodes' 'reg' property with of_get_cpu_hwid(). Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211006164332.1981454-8-robh@kernel.org
2021-10-20powerpc/smp: do not decrement idle task preempt count in CPU offlineNathan Lynch
With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM. Fixes: 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com
2021-10-20powerpc/idle: Don't corrupt back chain when going idleMichael Ellerman
In isa206_idle_insn_mayloss() we store various registers into the stack red zone, which is allowed. However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again, to 0(r1), which corrupts the stack back chain. We used to do the same in isa206_idle_insn_mayloss() itself, but we fixed that in 73287caa9210 ("powerpc64/idle: Fix SP offsets when saving GPRs"), however we missed that the macro also corrupts the back chain. Corrupting the back chain is bad for debuggability but doesn't necessarily cause a bug. However we recently changed the stack handling in some KVM code, and it now relies on the stack back chain being valid when it returns. The corruption causes that code to return with r1 pointing somewhere in kernel data, at some point LR is restored from the stack and we branch to NULL or somewhere else invalid. Only affects Power8 hosts running KVM guests, with dynamic_mt_modes enabled (which it is by default). The fixes tag below points to the commit that changed the KVM stack handling, exposing this bug. The actual corruption of the back chain has always existed since 948cf67c4726 ("powerpc: Add NAP mode support on Power7 in HV mode"). Fixes: 9b4416c5095c ("KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211020094826.3222052-1-mpe@ellerman.id.au
2021-10-18gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}Andreas Gruenbacher
Turn fault_in_pages_{readable,writeable} into versions that return the number of bytes not faulted in, similar to copy_to_user, instead of returning a non-zero value when any of the requested pages couldn't be faulted in. This supports the existing users that require all pages to be faulted in as well as new users that are happy if any pages can be faulted in. Rename the functions to fault_in_{readable,writeable} to make sure this change doesn't silently break things. Neither of these functions is entirely trivial and it doesn't seem useful to inline them, so move them to mm/gup.c. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-10-18powerpc/kvm: Fix kvm_use_magic_pageAndreas Gruenbacher
When switching from __get_user to fault_in_pages_readable, commit 9f9eae5ce717 broke kvm_use_magic_page: like __get_user, fault_in_pages_readable returns 0 on success. Fixes: 9f9eae5ce717 ("powerpc/kvm: Prefer fault_in_pages_readable function") Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-10-18powerpc/eeh: Use to_pci_driver() instead of pci_dev->driverUwe Kleine-König
Struct pci_driver contains a struct device_driver, so for PCI devices, it's easy to convert a device_driver * to a pci_driver * with to_pci_driver(). The device_driver * is in struct device, so we don't need to also keep track of the pci_driver * in struct pci_dev. Replace pdev->driver with to_pci_driver(). This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-15sched: Add wrapper for get_wchan() to keep task blockedKees Cook
Having a stable wchan means the process must be blocked and for it to stay that way while performing stack unwinding. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm] Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64] Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
2021-10-14powerpc: Mark .opd section read-onlyChristophe Leroy
.opd section contains function descriptors used to locate functions in the kernel. If someone is able to modify a function descriptor he will be able to run arbitrary kernel function instead of another. To avoid that, move .opd section inside read-only memory. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3cd40b682fb6f75bb40947b55ca0bac20cb3f995.1634136222.git.christophe.leroy@csgroup.eu
2021-10-13powerpc/eeh: Fix docstrings in eeh.cKai Song
We fix the following warnings when building kernel with W=1: arch/powerpc/kernel/eeh.c:598: warning: Function parameter or member 'function' not described in 'eeh_pci_enable' arch/powerpc/kernel/eeh.c:774: warning: Function parameter or member 'edev' not described in 'eeh_set_dev_freset' arch/powerpc/kernel/eeh.c:774: warning: expecting prototype for eeh_set_pe_freset(). Prototype was for eeh_set_dev_freset() instead arch/powerpc/kernel/eeh.c:814: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset_full' arch/powerpc/kernel/eeh.c:944: warning: Function parameter or member 'ops' not described in 'eeh_init' arch/powerpc/kernel/eeh.c:1451: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset' arch/powerpc/kernel/eeh.c:1526: warning: Function parameter or member 'func' not described in 'eeh_pe_inject_err' arch/powerpc/kernel/eeh.c:1526: warning: Excess function parameter 'function' described in 'eeh_pe_inject_err' Signed-off-by: Kai Song <songkai01@inspur.com> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211009041630.4135-1-songkai01@inspur.com
2021-10-12powerpc/eeh: Use dev_driver_string() instead of struct pci_dev->driver->nameUwe Kleine-König
Replace pdev->driver->name by dev_driver_string() for the corresponding struct device. This is a step toward removing pci_dev->driver. Move the function nearer its only user and instead of the ?: operator use a normal "if" which is more readable. Link: https://lore.kernel.org/r/20211004125935.2300113-6-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-10Merge tag 'powerpc-5.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A bit of a big batch, partly because I didn't send any last week, and also just because the BPF fixes happened to land this week. Summary: - Fix a regression hit by the IPR SCSI driver, introduced by the recent addition of MSI domains on pseries. - A big series including 8 BPF fixes, some with potential security impact and the rest various code generation issues. - Fix our program check assembler entry path, which was accidentally jumping into a gas macro and generating strange stack frames, which could confuse find_bug(). - A couple of fixes, and related changes, to fix corner cases in our machine check handling. - Fix our DMA IOMMU ops, which were not always returning the optimal DMA mask, leading to at least one device falling back to 32-bit DMA when it shouldn't. - A fix for KUAP handling on 32-bit Book3S. - Fix crashes seen when kdumping on some pseries systems. Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem, Christoph Hellwig, Johan Almbladh, Stan Johnson" * tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init powerpc/32s: Fix kuap_kernel_restore() powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler powerpc/64s: Fix unrecoverable MCE calling async handler from NMI powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG powerpc/64: warn if local irqs are enabled in NMI or hardirq context powerpc/traps: do not enable irqs in _exception powerpc/64s: fix program check interrupt emergency stack path powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000 powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END powerpc/bpf ppc32: Fix JMP32_JSET_K powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC powerpc/security: Add a helper to query stf_barrier type powerpc/bpf: Fix BPF_SUB when imm == 0x80000000 powerpc/bpf: Fix BPF_MOD when imm == 1 powerpc/bpf: Validate branch ranges powerpc/lib: Add helper to check if offset is within conditional branch range powerpc/iommu: Report the correct most efficient DMA mask for PCI devices
2021-10-09powerpc/cpuhp: BUG -> WARN conversion in offline pathNathan Lynch
If, due to bugs elsewhere, we get into unregister_cpu_online() with a CPU that isn't marked hotpluggable, we can emit a warning and return an appropriate error instead of crashing. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210927201933.76786-3-nathanl@linux.ibm.com
2021-10-09powerpc: fix unbalanced node refcount in check_kvm_guest()Nathan Lynch
When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it returns without performing a matching put for the lookup, leaving the node's reference count elevated. Add the necessary call to of_node_put(), rearranging the code slightly to avoid repetition or goto. Fixes: 107c55005fbd ("powerpc/pseries: Add KVM guest doorbell restrictions") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210928124550.132020-1-nathanl@linux.ibm.com
2021-10-07powerpc/64s: Fix unrecoverable MCE calling async handler from NMINicholas Piggin
The machine check handler is not considered NMI on 64s. The early handler is the true NMI handler, and then it schedules the machine_check_exception handler to run when interrupts are enabled. This works fine except the case of an unrecoverable MCE, where the true NMI is taken when MSR[RI] is clear, it can not recover, so it calls machine_check_exception directly so something might be done about it. Calling an async handler from NMI context can result in irq state and other things getting corrupted. This can also trigger the BUG at arch/powerpc/include/asm/interrupt.h:168 BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); Fix this by making an _async version of the handler which is called in the normal case, and a NMI version that is called for unrecoverable interrupts. Fixes: 2b43dd7653cc ("powerpc/64: enable MSR[EE] in irq replay pt_regs") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211004145642.1331214-6-npiggin@gmail.com
2021-10-07powerpc/64: warn if local irqs are enabled in NMI or hardirq contextNicholas Piggin
This can help catch bugs such as the one fixed by the previous change to prevent _exception() from enabling irqs. ppc32 could have a similar warning but it has no good config option to debug this stuff (the test may be overkill to add for production kernels). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211004145642.1331214-4-npiggin@gmail.com
2021-10-07powerpc/traps: do not enable irqs in _exceptionNicholas Piggin
_exception can be called by machine check handlers when the MCE hits user code (e.g., pseries and powernv). This will enable local irqs because, which is a dicey thing to do in NMI or hard irq context. This seemed to worked out okay because a userspace MCE can basically be treated like a synchronous interrupt (after async / imprecise MCEs are filtered out). Since NMI and hard irq handlers have started growing nmi_enter / irq_enter, and more irq state sanity checks, this has started to cause problems (or at least trigger warnings). The Fixes tag to the commit which introduced this rather than try to work out exactly which commit was the first that could possibly cause a problem because that may be difficult to prove. Fixes: 9f2f79e3a3c1 ("powerpc: Disable interrupts in 64-bit kernel FP and vector faults") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211004145642.1331214-3-npiggin@gmail.com
2021-10-07powerpc/64s: fix program check interrupt emergency stack pathNicholas Piggin
Emergency stack path was jumping into a 3: label inside the __GEN_COMMON_BODY macro for the normal path after it had finished, rather than jumping over it. By a small miracle this is the correct place to build up a new interrupt frame with the existing stack pointer, so things basically worked okay with an added weird looking 700 trap frame on top (which had the wrong ->nip so it didn't decode bug messages either). Fix this by avoiding using numeric labels when jumping over non-trivial macros. Before: LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: sh Not tainted 5.15.0-rc2-00034-ge057cdade6e5 #2637 NIP: 7265677368657265 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3a50 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 00000700 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 c0000000fffb3cf0 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [7265677368657265] 0x7265677368657265 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 Call Trace: [c0000000fffb3cf0] [c00000000000bdac] soft_nmi_common+0x13c/0x1d0 (unreliable) --- interrupt: 700 at decrementer_common_virt+0xb8/0x230 NIP: c0000000000098b8 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 22424282 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 0000000000002400 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 --- interrupt: 700 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 6d28218e0cc3c949 ]--- After: ------------[ cut here ]------------ kernel BUG at arch/powerpc/kernel/exceptions-64s.S:491! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: login Not tainted 5.15.0-rc2-00034-ge057cdade6e5-dirty #2638 NIP: c0000000000098b8 LR: c00000000006bf04 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 24482227 XER: 00040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006bf04 0000000000002400 c000000001513800 c000000001271868 GPR04: 00000000100f0d29 0000000042000000 0000000000000007 0000000000000009 GPR08: 00000000100f0d29 0000000024482227 0000000000002710 c000000000181b3c GPR12: 9000000000009033 c0000000016b0000 00000000100f0d29 c000000005b22f00 GPR16: 00000000ffff0000 0000000000000001 0000000000000009 00000000100eed90 GPR20: 00000000100eed90 0000000010000000 000000001000a49c 00000000100f1430 GPR24: c000000001271868 0000000002000000 0000000000000215 0000000000000300 GPR28: c000000001271800 0000000042000000 00000000100f0d29 c000000080647860 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230 LR [c00000000006bf04] ___do_page_fault+0x234/0xb10 Call Trace: Instruction dump: 4182000c 39400001 48000008 894d0932 714a0001 39400008 408225fc 718a4000 7c2a0b78 3821fcf0 41c20008 e82d0910 <0981fcf0> f92101a0 f9610170 f9810178 ---[ end trace a5dbd1f5ea4ccc51 ]--- Fixes: 0a882e28468f4 ("powerpc/64s/exception: remove bad stack branch") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211004145642.1331214-2-npiggin@gmail.com
2021-10-07powerpc/security: Add a helper to query stf_barrier typeNaveen N. Rao
Add a helper to return the stf_barrier type for the current processor. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3bd5d7f96ea1547991ac2ce3137dc2b220bae285.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-01audit: add support for the openat2 syscallRichard Guy Briggs
The openat2(2) syscall was added in kernel v5.6 with commit fddb5d430ad9 ("open: introduce openat2(2) syscall"). Add the openat2(2) syscall to the audit syscall classifier. Link: https://github.com/linux-audit/audit-kernel/issues/67 Link: https://lore.kernel.org/r/f5f1a4d8699613f8c02ce762807228c841c2e26f.1621363275.git.rgb@redhat.com Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> [PM: merge fuzz due to previous header rename, commit line wraps] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-10-01audit: replace magic audit syscall class numbers with macrosRichard Guy Briggs
Replace audit syscall class magic numbers with macros. This required putting the macros into new header file include/linux/audit_arch.h since the syscall macros were included for both 64 bit and 32 bit in any compat code, causing redefinition warnings. Link: https://lore.kernel.org/r/2300b1083a32aade7ae7efb95826e8f3f260b1df.1621363275.git.rgb@redhat.com Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> [PM: renamed header to audit_arch.h after consulting with Richard] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-09-30kprobes: treewide: Make it harder to refer kretprobe_trampoline directlyMasami Hiramatsu
Since now there is kretprobe_trampoline_addr() for referring the address of kretprobe trampoline code, we don't need to access kretprobe_trampoline directly. Make it harder to refer by renaming it to __kretprobe_trampoline(). Link: https://lkml.kernel.org/r/163163045446.489837.14510577516938803097.stgit@devnote2 Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-30kprobes: treewide: Remove trampoline_address from kretprobe_trampoline_handler()Masami Hiramatsu
The __kretprobe_trampoline_handler() callback, called from low level arch kprobes methods, has the 'trampoline_address' parameter, which is entirely superfluous as it basically just replicates: dereference_kernel_function_descriptor(kretprobe_trampoline) In fact we had bugs in arch code where it wasn't replicated correctly. So remove this superfluous parameter and use kretprobe_trampoline_addr() instead. Link: https://lkml.kernel.org/r/163163044546.489837.13505751885476015002.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-30kprobes: treewide: Replace arch_deref_entry_point() with ↵Masami Hiramatsu
dereference_symbol_descriptor() ~15 years ago kprobes grew the 'arch_deref_entry_point()' __weak function: 3d7e33825d87: ("jprobes: make jprobes a little safer for users") But this is just open-coded dereference_symbol_descriptor() in essence, and its obscure nature was causing bugs. Just use the real thing and remove arch_deref_entry_point(). Link: https://lkml.kernel.org/r/163163043630.489837.7924988885652708696.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-30kprobes: treewide: Use 'kprobe_opcode_t *' for the code address in ↵Masami Hiramatsu
get_optimized_kprobe() Since get_optimized_kprobe() is only used inside kprobes, it doesn't need to use 'unsigned long' type for 'addr' parameter. Make it use 'kprobe_opcode_t *' for the 'addr' parameter and subsequent call of arch_within_optimized_kprobe() also should use 'kprobe_opcode_t *'. Note that MAX_OPTIMIZED_LENGTH and RELATIVEJUMP_SIZE are defined by byte-size, but the size of 'kprobe_opcode_t' depends on the architecture. Therefore, we must be careful when calculating addresses using those macros. Link: https://lkml.kernel.org/r/163163040680.489837.12133032364499833736.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-30powerpc: smp: remove hack to obtain offset of task_struct::cpuArd Biesheuvel
Instead of relying on awful hacks to obtain the offset of the cpu field in struct task_struct, move it back into struct thread_info, which does not create the same level of circular dependency hell when trying to include the header file that defines it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2021-09-30sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=yArd Biesheuvel
THREAD_INFO_IN_TASK moved the CPU field out of thread_info, but this causes some issues on architectures that define raw_smp_processor_id() in terms of this field, due to the fact that #include'ing linux/sched.h to get at struct task_struct is problematic in terms of circular dependencies. Given that thread_info and task_struct are the same data structure anyway when THREAD_INFO_IN_TASK=y, let's move it back so that having access to the type definition of struct thread_info is sufficient to reference the CPU number of the current task. Note that this requires THREAD_INFO_IN_TASK's definition of the task_thread_info() helper to be updated, as task_cpu() takes a pointer-to-const, whereas task_thread_info() (which is used to generate lvalues as well), needs a non-const pointer. So make it a macro instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2021-09-30powerpc/iommu: Report the correct most efficient DMA mask for PCI devicesAlexey Kardashevskiy
According to dma-api.rst, the dma_get_required_mask() helper should return "the mask that the platform requires to operate efficiently". Which in the case of PPC64 means the bypass mask and not a mask from an IOMMU table which is shorter and slower to use due to map/unmap operations (especially expensive on "pseries"). However the existing implementation ignores the possibility of bypassing and returns the IOMMU table mask on the pseries platform which makes some drivers (mpt3sas is one example) choose 32bit DMA even though bypass is supported. The powernv platform sort of handles it by having a bigger default window with a mask >=40 but it only works as drivers choose 63/64bit if the required mask is >32 which is rather pointless. This reintroduces the bypass capability check to let drivers make a better choice of the DMA mask. Fixes: f1565c24b596 ("powerpc: use the generic dma_ops_bypass mode") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210930034454.95794-1-aik@ozlabs.ru
2021-09-22entry: rseq: Call rseq_handle_notify_resume() in tracehook_notify_resume()Sean Christopherson
Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now that the two function are always called back-to-back by architectures that have rseq. The rseq helper is stubbed out for architectures that don't support rseq, i.e. this is a nop across the board. Note, tracehook_notify_resume() is horribly named and arguably does not belong in tracehook.h as literally every line of code in it has nothing to do with tracing. But, that's been true since commit a42c6ded827d ("move key_repace_session_keyring() into tracehook_notify_resume()") first usurped tracehook_notify_resume() back in 2012. Punt cleaning that mess up to future patches. No functional change intended. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210901203030.1292304-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-21PCI: Rename pcibios_add_device() to pcibios_device_add()Oliver O'Halloran
The general convention for pcibios_* hooks is that they're named after the corresponding pci_* function they provide a hook for. The exception is pcibios_add_device() which provides a hook for pci_device_add(). Rename pcibios_add_device() to pcibios_device_add() so it matches pci_device_add(). Also, remove the export of the microblaze version. The only caller must be compiled as a built-in so there's no reason for the export. Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
2021-09-13powerpc/mce: Fix access error in mce handlerGanesh Goudar
We queue an irq work for deferred processing of mce event in realmode mce handler, where translation is disabled. Queuing of the work may result in accessing memory outside RMO region, such access needs the translation to be enabled for an LPAR running with hash mmu else the kernel crashes. After enabling translation in mce_handle_error() we used to leave it enabled to avoid crashing here, but now with the commit 74c3354bc1d89 ("powerpc/pseries/mce: restore msr before returning from handler") we are restoring the MSR to disable translation. Hence to fix this enable the translation before queuing the work. Without this change following trace is seen on injecting SLB multihit in an LPAR running with hash mmu. Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 5 PID: 1883 Comm: insmod Tainted: G OE 5.14.0-mce+ #137 NIP: c000000000735d60 LR: c000000000318640 CTR: 0000000000000000 REGS: c00000001ebff9a0 TRAP: 0300 Tainted: G OE (5.14.0-mce+) MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28008228 XER: 00000001 CFAR: c00000000031863c DAR: c00000027fa8fe08 DSISR: 40000000 IRQMASK: 0 ... NIP llist_add_batch+0x0/0x40 LR __irq_work_queue_local+0x70/0xc0 Call Trace: 0xc00000001ebffc0c (unreliable) irq_work_queue+0x40/0x70 machine_check_queue_event+0xbc/0xd0 machine_check_early_common+0x16c/0x1f4 Fixes: 74c3354bc1d89 ("powerpc/pseries/mce: restore msr before returning from handler") Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> [mpe: Fix comment formatting, trim oops in change log for readability] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210909064330.312432-1-ganeshgr@linux.ibm.com
2021-09-13powerpc/64s: system call rfscv workaround for TM bugsNicholas Piggin
The rfscv instruction does not work correctly with the fake-suspend mode in POWER9, which can end up with the hypervisor restoring an incorrect checkpoint. Work around this by setting the _TIF_RESTOREALL flag if a system call returns to a transaction active state, causing rfid to be used instead of rfscv to return, which will do the right thing. The contents of the registers are irrelevant because they will be overwritten in this case anyway. Fixes: 7fa95f9adaee7 ("powerpc/64s: system call support for scv/rfscv instructions") Reported-by: Eirik Fuller <efuller@redhat.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210908101718.118522-1-npiggin@gmail.com
2021-09-13powerpc/64s: system call scv tabort fix for corrupt irq soft-mask stateNicholas Piggin
If a system call is made with a transaction active, the kernel immediately aborts it and returns. scv system calls disable irqs even earlier in their interrupt handler, and tabort_syscall does not fix this up. This can result in irq soft-mask state being messed up on the next kernel entry, and crashing at BUG_ON(arch_irq_disabled_regs(regs)) in the kernel exit handlers, or possibly worse. This can't easily be fixed in asm because at this point an async irq may have hit, which is soft-masked and marked pending. The pending interrupt has to be replayed before returning to userspace. The fix is to move the tabort_syscall code to C in the main syscall handler, and just skip the system call but otherwise return as usual, which will take care of the pending irqs. This also does a bunch of other things including possible signal delivery to the process, but the doomed transaction should still be aborted when it is eventually returned to. The sc system call path is changed to use the new C function as well to reduce code and path differences. This slows down how quickly system calls are aborted when called while a transaction is active, which could potentially impact TM performance. But making any system call is already bad for performance, and TM is on the way out, so go with simpler over faster. Fixes: 7fa95f9adaee7 ("powerpc/64s: system call support for scv/rfscv instructions") Reported-by: Eirik Fuller <efuller@redhat.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Use #ifdef rather than IS_ENABLED() to fix build error on 32-bit] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210903125707.1601269-1-npiggin@gmail.com
2021-09-08compat: remove some compat entry pointsArnd Bergmann
These are all handled correctly when calling the native system call entry point, so remove the special cases. Link: https://lkml.kernel.org/r/20210727144859.4150043-6-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f. Subsystems affected by this patch series: mm (memory-hotplug, rmap, ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan), alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib, checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig, selftests, ipc, and scripts" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) scripts: check_extable: fix typo in user error message mm/workingset: correct kernel-doc notations ipc: replace costly bailout check in sysvipc_find_ipc() selftests/memfd: remove unused variable Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH configs: remove the obsolete CONFIG_INPUT_POLLDEV prctl: allow to setup brk for et_dyn executables pid: cleanup the stale comment mentioning pidmap_init(). kernel/fork.c: unexport get_{mm,task}_exe_file coredump: fix memleak in dump_vma_snapshot() fs/coredump.c: log if a core dump is aborted due to changed file permissions nilfs2: use refcount_dec_and_lock() to fix potential UAF nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group trap: cleanup trap_init() init: move usermodehelper_enable() to populate_rootfs() ...
2021-09-08trap: cleanup trap_init()Kefeng Wang
There are some empty trap_init() definitions in different ARCHs, Introduce a new weak trap_init() function to clean them up. Link: https://lkml.kernel.org/r/20210812123602.76356-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm32] Acked-by: Vineet Gupta [arc] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <palmerdabbelt@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03Merge tag 'kbuild-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
generated by cgit (git 2.34.1) at 2025-09-23 14:54:24 +0000