| Age | Commit message (Collapse) | Author |
|---|
|
Several files include asm/prom.h for no reason.
Clean it up.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop change to prom_parse.c as reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
|
|
Move pci_device_from_OF_node() in pci64.c because it needs definition
of struct device_node and is not worth inlining.
ppc32.c already has it in pci32.c.
That way pci-bridge.h doesn't need linux/of.h (Brought by asm/prom.h
via asm/pci.h)
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3c88286b55413730d7784133993a46ef4a3607ce.1646767214.git.christophe.leroy@csgroup.eu
|
|
emulate_step() instruction emulation including sc instruction emulation
initially appeared in xmon. It was then moved into sstep.c where kprobes
could use it too, and later hw_breakpoint and uprobes started to use it.
Until uprobes, the only instruction emulation users were for kernel
mode instructions.
- xmon only steps / breaks on kernel addresses.
- kprobes is kernel only.
- hw_breakpoint only emulates kernel instructions, single steps user.
At one point, there was support for the kernel to execute sc
instructions, although that is long removed and it's not clear whether
there were any in-tree users. So system call emulation is not required
by the above users.
uprobes uses emulate_step and it appears possible to emulate sc
instruction in userspace. Userspace system call emulation is broken and
it's not clear it ever worked well.
The big complication is that userspace takes an interrupt to the kernel
to emulate the instruction. The user->kernel interrupt sets up registers
and interrupt stack frame expecting to return to userspace, then system
call instruction emulation re-directs that stack frame to the kernel,
early in the system call interrupt handler. This means the interrupt
return code takes the kernel->kernel restore path, which does not
restore everything as the system call interrupt handler would expect
coming from userspace. regs->iamr appears to get lost for example,
because the kernel->kernel return does not restore the user iamr.
Accounting such as irqflags tracing and CPU accounting does not get
flipped back to user mode as the system call handler expects, so those
appear to enter the kernel twice without returning to userspace.
These things may be individually fixable with various complication, but
it is a big complexity for unclear real benefit.
Furthermore, it is not possible to single step a system call instruction
since it causes an interrupt. As such, a separate patch disables probing
on system call instructions.
This patch removes system call emulation and disables stepping system
calls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[minor commit log edit, and also get rid of '#ifdef CONFIG_PPC64']
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a412e3b3791ed83de18704c8d90f492e7a0049c0.1648648712.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Per the ISA, a Trace interrupt is not generated for:
- [h|u]rfi[d]
- rfscv
- sc, scv, and Trap instructions that trap
- Power-Saving Mode instructions
- other instructions that cause interrupts (other than Trace interrupts)
- the first instructions of any interrupt handler (applies to Branch and Single Step tracing;
CIABR matches may still occur)
- instructions that are emulated by software
Add a helper to check for instructions belonging to the first four
categories above and to reject kprobes, uprobes and xmon breakpoints on
such instructions. We reject probing on instructions belonging to these
categories across all ISA versions and across both BookS and BookE.
For trap instructions, we can't know in advance if they can cause a
trap, and there is no good reason to allow probing on those. Also,
uprobes already refuses to probe trap instructions and kprobes does not
allow probes on trap instructions used for kernel warnings and bugs. As
such, stop allowing any type of probes/breakpoints on trap instruction
across uprobes, kprobes and xmon.
For some of the fp/altivec instructions that can generate an interrupt
and which we emulate in the kernel (altivec assist, for example), we
check and turn off single stepping in emulate_single_step().
Instructions generating a DSI are restarted and single stepping normally
completes once the instruction is completed.
In uprobes, if a single stepped instruction results in a non-fatal
signal to be delivered to the task, such signals are "delayed" until
after the instruction completes. For fatal signals, single stepping is
cancelled and the instruction restarted in-place so that core dump
captures proper addresses.
In kprobes, we do not allow probes on instructions having an extable
entry and we also do not allow probing interrupt vectors.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f56ee979d50b8711fae350fc97870f3ca34acd75.1648648712.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
|
|
arch_randomize_brk() is only needed for hash on book3s/64, for other
platforms the one provided by the default mmap layout is good enough.
Move it to hash_utils.c and use randomize_page() like the generic one.
And properly opt out the radix case instead of making an assumption
on mmu_highuser_ssize.
Also change to a 32M range like most other architectures instead of 8M.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eafa4d18ec8ac7b98dd02b40181e61643707cc7c.1649523076.git.christophe.leroy@csgroup.eu
|
|
CONFIG_PPC_MM_SLICES is always selected by hash book3s/64.
CONFIG_PPC_MM_SLICES is never selected by other platforms.
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dc2cdc204de8978574bf7c02329b6cfc4db0bce7.1649523076.git.christophe.leroy@csgroup.eu
|
|
Merge master into next, to bring in commit 5f24d5a579d1 ("mm, hugetlb:
allow for "high" userspace addresses"), which is needed as a
prerequisite for the series converting powerpc to the generic mmap
logic.
|
|
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from powersave_off().
Fixes: 302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org
|
|
These one line of code don't meet the kernel coding style, so remove the
redundant space.
Signed-off-by: maqiang <maqianga@uniontech.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210303115710.30886-1-maqianga@uniontech.com
|
|
Clean the following coccicheck warning:
./arch/powerpc/kernel/fadump.c:1291:34-35: WARNING opportunity for
swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220129034847.76902-1-jiapeng.chong@linux.alibaba.com
|
|
Fix typos of 'remaining' and 'those'.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Matthew Wilcox <willy@infradead.org> # 'remaining'
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211030002619.2063-1-rdunlap@infradead.org
|
|
The simple_strtoull() function is deprecated in some situation, since
it does not check for the range overflow, use kstrtoull() instead.
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526092020.554341-1-chenhuang5@huawei.com
|
|
The sparse tool complains as follow:
arch/powerpc/kernel/btext.c:48:5: warning:
symbol 'boot_text_mapped' was not declared. Should it be static?
This symbol is not used outside of btext.c, so this commit make
it static.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408011801.557004-3-yukuai3@huawei.com
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
arch/powerpc/kernel/btext.c:49:12: error: 'force_printk_to_btext'
defined but not used.
It is never used, and so can be removed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408011801.557004-2-yukuai3@huawei.com
|
|
We found these warnings in arch/powerpc/kernel/time.c as follows:
warning: symbol 'decrementer_max' was not declared. Should it be static?
warning: symbol 'rtc_lock' was not declared. Should it be static?
warning: symbol 'dtl_consumer' was not declared. Should it be static?
Declare 'decrementer_max' in powerpc asm/time.h.
Include linux/mc146818rtc.h in powerpc kernel/time.c where 'rtc_lock' is
declared. And remove duplicated declaration of 'rtc_lock' in powerpc
platforms/chrp/time.c because it has included linux/mc146818rtc.h.
Move 'dtl_consumer' definition after "include <asm/dtl.h>" because it is
declared there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210324090939.143477-1-heying24@huawei.com
|
|
On crash, boot memory area is copied to a destination address by f/w.
This region is setup as separate PT_LOAD segment with appropriate
offset to handle the different physical address and offset in vmcore.
If this destination address is not page aligned, reading the vmcore
with mmap is likely to fail forcing tools like makedumpfile to fall
back to regular read. Avoid mmap read failure by ensuring that the
destination address is always page aligned.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-3-hbathini@linux.ibm.com
|
|
Boot memory area is setup as separate PT_LOAD segment in the vmcore
as it is moved by f/w, on crash, to a destination address provided by
the kernel. Having separate PT_LOAD segment helps in handling the
different physical address and offset for boot memory area in the
vmcore.
Commit ced1bf52f477 ("powerpc/fadump: merge adjacent memory ranges to
reduce PT_LOAD segements") inadvertly broke this pre-condition for
cases where some of the first kernel memory is available adjacent to
boot memory area. This scenario is rare but possible when memory for
fadump could not be reserved adjacent to boot memory area owing to
memory hole or such. Reading memory from a vmcore exported in such
scenario provides incorrect data. Fix it by ensuring no other region
is folded into boot memory area.
Fixes: ced1bf52f477 ("powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements")
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-2-hbathini@linux.ibm.com
|
|
An LPAR can be terminated by the POWER Hypervisor (PHYP) for various
reasons. If FADump was configured when PHYP terminates the LPAR,
platform-assisted dump is initiated to save the kernel dump. But CPU
register data would not be processed/saved in the vmcore in such case
because CPU mask is set in crash_fadump() at the time of kernel crash
and it remains unset in this case with LPAR being terminated by PHYP
abruptly.
To get around the problem, initialize cpu_mask to cpu_possible_mask
so as to ensure all possible CPUs' register data is processed for the
vmcore generated on PHYP terminated LPAR. Also, rename the crash info
member variable from online_mask to cpu_mask as it doesn't necessarily
have to be online CPU mask always.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220404182137.59231-1-hbathini@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Partly revert a change to our timer_interrupt() that caused lockups
with high res timers disabled.
- Fix a bug in KVM TCE handling that could corrupt kernel memory.
- Two commits fixing Power9/Power10 perf alternative event selection.
Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic
Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin.
* tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf: Fix 32bit compile
powerpc/perf: Fix power10 event alternatives
powerpc/perf: Fix power9 event alternatives
KVM: PPC: Fix TCE handling for VFIO
powerpc/time: Always set decrementer in timer_interrupt()
|
|
This is a partial revert of commit 0faf20a1ad16 ("powerpc/64s/interrupt:
Don't enable MSR[EE] in irq handlers unless perf is in use").
Prior to that commit, we always set the decrementer in
timer_interrupt(), to clear the timer interrupt. Otherwise we could end
up continuously taking timer interrupts.
When high res timers are enabled there is no problem seen with leaving
the decrementer untouched in timer_interrupt(), because it will be
programmed via hrtimer_interrupt() -> tick_program_event() ->
clockevents_program_event() -> decrementer_set_next_event().
However with CONFIG_HIGH_RES_TIMERS=n or booting with highres=off, we
see a stall/lockup, because tick_nohz_handler() does not cause a
reprogram of the decrementer, leading to endless timer interrupts.
Example trace:
[ 1.898617][ T7] Freeing initrd memory: 2624K^M
[ 22.680919][ C1] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:^M
[ 22.682281][ C1] rcu: 0-....: (25 ticks this GP) idle=073/0/0x1 softirq=10/16 fqs=1050 ^M
[ 22.682851][ C1] (detected by 1, t=2102 jiffies, g=-1179, q=476)^M
[ 22.683649][ C1] Sending NMI from CPU 1 to CPUs 0:^M
[ 22.685252][ C0] NMI backtrace for cpu 0^M
[ 22.685649][ C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc2-00185-g0faf20a1ad16 #145^M
[ 22.686393][ C0] NIP: c000000000016d64 LR: c000000000f6cca4 CTR: c00000000019c6e0^M
[ 22.686774][ C0] REGS: c000000002833590 TRAP: 0500 Not tainted (5.16.0-rc2-00185-g0faf20a1ad16)^M
[ 22.687222][ C0] MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24000222 XER: 00000000^M
[ 22.688297][ C0] CFAR: c00000000000c854 IRQMASK: 0 ^M
...
[ 22.692637][ C0] NIP [c000000000016d64] arch_local_irq_restore+0x174/0x250^M
[ 22.694443][ C0] LR [c000000000f6cca4] __do_softirq+0xe4/0x3dc^M
[ 22.695762][ C0] Call Trace:^M
[ 22.696050][ C0] [c000000002833830] [c000000000f6cc80] __do_softirq+0xc0/0x3dc (unreliable)^M
[ 22.697377][ C0] [c000000002833920] [c000000000151508] __irq_exit_rcu+0xd8/0x130^M
[ 22.698739][ C0] [c000000002833950] [c000000000151730] irq_exit+0x20/0x40^M
[ 22.699938][ C0] [c000000002833970] [c000000000027f40] timer_interrupt+0x270/0x460^M
[ 22.701119][ C0] [c0000000028339d0] [c0000000000099a8] decrementer_common_virt+0x208/0x210^M
Possibly this should be fixed in the lowres timing code, but that would
be a generic change and could take some time and may not backport
easily, so for now make the programming of the decrementer unconditional
again in timer_interrupt() to avoid the stall/lockup.
Fixes: 0faf20a1ad16 ("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless perf is in use")
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20220420141657.771442-1-mpe@ellerman.id.au
|
|
Huge page backed vmalloc memory could benefit performance in many cases.
However, some users of vmalloc may not be ready to handle huge pages for
various reasons: hardware constraints, potential pages split, etc.
VM_NO_HUGE_VMAP was introduced to allow vmalloc users to opt-out huge
pages. However, it is not easy to track down all the users that require
the opt-out, as the allocation are passed different stacks and may cause
issues in different layers.
To address this issue, replace VM_NO_HUGE_VMAP with an opt-in flag,
VM_ALLOW_HUGE_VMAP, so that users that benefit from huge pages could ask
specificially.
Also, remove vmalloc_no_huge() and add opt-in helper vmalloc_huge().
Fixes: fac54e2bfb5b ("x86/Kconfig: Select HAVE_ARCH_HUGE_VMALLOC with HAVE_ARCH_HUGE_VMAP")
Link: https://lore.kernel.org/netdev/14444103-d51b-0fb3-ee63-c3f182f0b546@molgen.mpg.de/"
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
guest could be lost (or delayed until the next guest exit).
- Disable SCV (system call vectored) when PR KVM guests could be run.
- Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
guests.
- Add a new KVM CAP to indicate if AIL == 3 is supported.
- Fix a regression when hotplugging a CPU to a memoryless/cpuless node.
- Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
fixes crashes seen due to hardened usercopy.
- Revert a change to max_mapnr which broke HIGHMEM.
Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.
* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: Set max_mapnr correctly"
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
powerpc/numa: Handle partially initialized numa nodes
powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
KVM: PPC: Book3S PR: Disallow AIL != 0
KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
KVM: PPC: Book3S HV P9: Fix "lost kick" race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
|
|
$(shell ...) expands to empty. There is no need to assign it to _dummy.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
|
Merge some more commits from our KVM topic branch. In particular this
brings in some commits that depend on a new capability that was merged
via the KVM tree for v5.18.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
"Add support for Intel CET-IBT, available since Tigerlake (11th gen),
which is a coarse grained, hardware based, forward edge
Control-Flow-Integrity mechanism where any indirect CALL/JMP must
target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
is limited to 2 instructions (and typically fewer) on branch targets
not starting with ENDBR. CET-IBT also limits speculation of the next
sequential instruction after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides,
as described above, speculation limits itself"
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
kvm/emulate: Fix SETcc emulation for ENDBR
x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
kbuild: Fixup the IBT kbuild changes
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
x86: Remove toolchain check for X32 ABI capability
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
objtool: Find unused ENDBR instructions
objtool: Validate IBT assumptions
objtool: Add IBT/ENDBR decoding
objtool: Read the NOENDBR annotation
x86: Annotate idtentry_df()
x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
x86: Annotate call_on_stack()
objtool: Rework ASM_REACHABLE
x86: Mark __invalid_creds() __noreturn
exit: Mark do_group_exit() __noreturn
x86: Mark stop_this_cpu() __noreturn
objtool: Ignore extra-symbol code
objtool: Rename --duplicate to --lto
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Livepatch support for 32-bit is probably the standout new feature,
otherwise mostly just lots of bits and pieces all over the board.
There's a series of commits cleaning up function descriptor handling,
which touches a few other arches as well as LKDTM. It has acks from
Arnd, Kees and Helge.
Summary:
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some
toolchains. This allows powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional
memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
Wedson Almeida Filho, and YueHaibing"
* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc/pseries: Fix use after free in remove_phb_dynamic()
powerpc/time: improve decrementer clockevent processing
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
powerpc/tm: Fix more userspace r13 corruption
powerpc/xive: fix return value of __setup handler
powerpc/64: Add UADDR64 relocation support
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
powerpc/ps3: remove unneeded semicolons
powerpc/64: Force inlining of prevent_user_access() and set_kuap()
powerpc/bitops: Force inlining of fls()
powerpc: declare unmodified attribute_group usages const
powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
powerpc/secvar: fix refcount leak in format_show()
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
powerpc: Move C prototypes out of asm-prototypes.h
powerpc/kexec: Declare kexec_paca static
powerpc/smp: Declare current_set static
powerpc: Cleanup asm-prototypes.c
powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
...
|
|
node_dev_init()
... and call node_dev_init() after memory_dev_init() from driver_init(),
so before any of the existing arch/subsys calls. All online nodes should
be known at that point: early during boot, arch code determines node and
zone ranges and sets the relevant nodes online; usually this happens in
setup_arch().
This is in line with memory_dev_init(), which initializes the memory
device subsystem and creates all memory block devices.
Similar to memory_dev_init(), panic() if anything goes wrong, we don't
want to continue with such basic initialization errors.
The important part is that node_dev_init() gets called after
memory_dev_init() and after cpu_dev_init(), but before any of the relevant
archs call register_cpu() to register the new cpu device under the node
device. The latter should be the case for the current users of
topology_init().
Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Anatoly Pugachev <matorola@gmail.com> (sparc64)
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With commit a4e92ce8e4c8 ("powerpc/fadump: Reservationless firmware
assisted dump"), Linux kernel's Contiguous Memory Allocator (CMA) based
reservation was introduced in fadump. That change was aimed at using CMA
to let applications utilize the memory reserved for fadump while blocking
it from being used for kernel pages. The assumption was, even if CMA
activation fails for whatever reason, the memory still remains reserved to
avoid it from being used for kernel pages. But commit 072355c1cf2d
("mm/cma: expose all pages to the buddy if activation of an area fails")
breaks this assumption as it started exposing all pages to buddy allocator
on CMA activation failure. It led to warning messages like below while
running crash-utility on vmcore of a kernel having above two commits:
crash: seek error: kernel virtual address: <from reserved region>
To fix this problem, opt out from exposing pages to buddy allocator on CMA
activation failure for fadump reserved memory.
Link: https://lkml.kernel.org/r/20220117075246.36072-3-hbathini@linux.ibm.com
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: enforce pageblock_order < MAX_ORDER".
Having pageblock_order >= MAX_ORDER seems to be able to happen in corner
cases and some parts of the kernel are not prepared for it.
For example, Aneesh has shown [1] that such kernels can be compiled on
ppc64 with 64k base pages by setting FORCE_MAX_ZONEORDER=8, which will
run into a WARN_ON_ONCE(order >= MAX_ORDER) in comapction code right
during boot.
We can get pageblock_order >= MAX_ORDER when the default hugetlb size is
bigger than the maximum allocation granularity of the buddy, in which
case we are no longer talking about huge pages but instead gigantic
pages.
Having pageblock_order >= MAX_ORDER can only make alloc_contig_range()
of such gigantic pages more likely to succeed.
Reliable use of gigantic pages either requires boot time allcoation or
CMA, no need to overcomplicate some places in the kernel to optimize for
corner cases that are broken in other areas of the kernel.
This patch (of 2):
Let's enforce pageblock_order < MAX_ORDER and simplify.
Especially patch #1 can be regarded a cleanup before:
[PATCH v5 0/6] Use pageblock_order for cma and alloc_contig_range
alignment. [2]
[1] https://lkml.kernel.org/r/87r189a2ks.fsf@linux.ibm.com
[2] https://lkml.kernel.org/r/20220211164135.1803616-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20220214174132.219303-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: John Garry via iommu <iommu@lists.linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The stop/shutdown op should not use decrementer_set_next_event because
that sets decrementers_next_tb to now + decrementer_max, which means a
decrementer interrupt that occurs after that time will call the
clockevent event handler unexpectedly. Set next_tb to ~0 here to prevent
any clock event call. Init all clockevents to stopped.
Then the decrementer clockevent device always has event_handler set and
applicable because we know the clock event device was not stopped. So
make this call unconditional to show that it is always called. next_tb
need not be set to ~0 before the event handler is called because it will
stop the clockevent device if there is no other timer.
Finally, the timer broadcast interrupt should not modify next_tb because
it is not involved with the local decrementer clockevent on this CPU.
This doesn't fix a known bug, just tidies the code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124143930.3923442-3-npiggin@gmail.com
|
|
If the next host timer is beyond decrementer range, timer_rearm_host_dec
will leave decrementer not programmed. This will not cause a problem for
the host it will just set the decrementer correctly when the decrementer
interrupt hits, it seems safer not to leave the next host decrementer
interrupt timing able to be influenced by a guest.
This code is only used in the P9 KVM paths so it's unlikely to be hit
practically unless large decrementer is force disabled in the host.
Fixes: 25aa145856cd ("powerpc/time: add API for KVM to re-arm the host timer/decrementer")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124143930.3923442-2-npiggin@gmail.com
|
|
Commit cf13435b730a ("powerpc/tm: Fix userspace r13 corruption") fixes a
problem in treclaim where a SLB miss can occur on the
thread_struct->ckpt_regs while SCRATCH0 is live with the saved user r13
value, clobbering it with the kernel r13 and ultimately resulting in
kernel r13 being stored in ckpt_regs.
There is an equivalent problem in trechkpt where the user r13 value is
loaded into r13 from chkpt_regs to be recheckpointed, but a SLB miss
could occur on ckpt_regs accesses after that, which will result in r13
being clobbered with a kernel value and that will get recheckpointed and
then restored to user registers.
The same memory page is accessed right before this critical window where
a SLB miss could cause corruption, so hitting the bug requires the SLB
entry be removed within a small window of instructions, which is
possible if a SLB related MCE hits there. PAPR also permits the
hypervisor to discard this SLB entry (because slb_shadow->persistent is
only set to SLB_NUM_BOLTED) although it's not known whether any
implementations would do this (KVM does not). So this is an extremely
unlikely bug, only found by inspection.
Fix this by also storing user r13 in a temporary location on the kernel
stack and don't change the r13 register from kernel r13 until the RI=0
critical section that does not fault.
The SCRATCH0 change is not strictly part of the fix, it's only used in
the RI=0 section so it does not have the same problem as the previous
SCRATCH0 bug.
Fixes: 98ae22e15b43 ("powerpc: Add helper functions for transactional memory context switching")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220311024733.48926-1-npiggin@gmail.com
|
|
In order to allow kprobes to skip the ENDBR instructions at sym+0 for
X86_KERNEL_IBT builds, change _kprobe_addr() to take an architecture
callback to inspect the function at hand and modify the offset if
needed.
This streamlines the existing interface to cover more cases and
require less hooks. Once PowerPC gets fully converted there will only
be the one arch hook.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.405947704@infradead.org
|
|
Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h.
While doing that rename tracehook_notify_resume to resume_user_mode_work.
Update all of the places that included tracehook.h for these functions to
include resume_user_mode.h instead.
Update all of the callers of tracehook_notify_resume to call
resume_user_mode_work.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Rename tracehook_report_syscall_{entry,exit} to
ptrace_report_syscall_{entry,exit} and place them in ptrace.h
There is no longer any generic tracehook infractructure so make
these ptrace specific functions ptrace specific.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
When ld detects unaligned relocations, it emits R_PPC64_UADDR64
relocations instead of R_PPC64_RELATIVE. Currently R_PPC64_UADDR64 are
detected by arch/powerpc/tools/relocs_check.sh and expected not to work.
Below is a simple chunk to trigger this behaviour (this disables
optimization for the demonstration purposes only, this also happens with
-O1/-O2 when CONFIG_PRINTK_INDEX=y, for example):
\#pragma GCC push_options
\#pragma GCC optimize ("O0")
struct entry {
const char *file;
int line;
} __attribute__((packed));
static const struct entry e1 = { .file = __FILE__, .line = __LINE__ };
static const struct entry e2 = { .file = __FILE__, .line = __LINE__ };
...
prom_printf("e1=%s %lx %lx\n", e1.file, (unsigned long) e1.file, mfmsr());
prom_printf("e2=%s %lx\n", e2.file, (unsigned long) e2.file);
\#pragma GCC pop_options
This adds support for UADDR64 for 64bit. This reuses __dynamic_symtab
from the 32bit code which supports more relocation types already.
Because RELACOUNT includes only R_PPC64_RELATIVE, this replaces it with
RELASZ which is the size of all relocation records.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220309061822.168173-1-aik@ozlabs.ru
|
|
Refcount leak will happen when format_show returns failure in multiple
cases. Unified management of of_node_put can fix this problem.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220302021959.10959-1-hbh25y@gmail.com
|
|
We originally added asm-prototypes.h in commit 42f5b4cacd78 ("powerpc:
Introduce asm-prototypes.h"). It's purpose was for prototypes of C
functions that are only called from asm, in order to fix sparse
warnings about missing prototypes.
A few months later Nick added a different use case in
commit 4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm")
for C prototypes for exported asm functions. This is basically the
inverse of our original usage.
Since then we've added various prototypes to asm-prototypes.h for both
reasons, meaning we now need to unstitch it all.
Dispatch prototypes of C functions into relevant headers and keep
only the prototypes for functions defined in assembly.
For the time being, leave prom_init() there because moving it
into asm/prom.h or asm/setup.h conflicts with
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o
This will be fixed later by untaggling asm/pci.h and asm/prom.h
or by renaming the function in shadowrom.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62d46904eca74042097acf4cb12c175e3067f3d1.1646413435.git.christophe.leroy@csgroup.eu
|
|
PR KVM does not support running with AIL enabled, and SCV does is not
supported with AIL disabled. Fix this by ensuring the SCV facility is
disabled with FSCR while a CPU could be running with AIL=0.
The PowerNV host supports disabling AIL on a per-CPU basis, so SCV just
needs to be disabled when a vCPU is being run.
The pSeries machine can only switch AIL on a system-wide basis, so it
must disable SCV support at boot if the configuration can potentially
run a PR KVM guest.
Also ensure a the FSCR[SCV] bit can not be enabled when emulating
mtFSCR for the guest.
SCV is not emulated for the PR guest at the moment, this just fixes the
host crashes.
Alternatives considered and rejected:
- SCV support can not be disabled by PR KVM after boot, because it is
advertised to userspace with HWCAP.
- AIL can not be disabled on a per-CPU basis. At least when running on
pseries it is a per-LPAR setting.
- Support for real-mode SCV vectors will not be added because they are
at 0x17000 so making such a large fixed head space causes immediate
value limits to be exceeded, requiring a lot rework and more code.
- Disabling SCV for any PR KVM possible kernel will cause a slowdown
when not using PR KVM.
- A boot time option to disable SCV to use PR KVM is user-hostile.
- System call instruction emulation for SCV facility unavailable
instructions is too complex and old emulation code was subtly broken
and removed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Link: https://lore.kernel.org/r/20220222064727.2314380-2-npiggin@gmail.com
|
|
current_set extern not needed anymore since
commit eafd825ed710 ("powerpc/64: Simplify __secondary_start
paca->kstack handling")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a55eb65c9d7319f0af3c31e3f6ba36522f10003d.1646413435.git.christophe.leroy@csgroup.eu
|
|
Instead of open coding offset value 24, use STK_GOT when
accessing got register in stack.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9042bb30fa972056715fe5b6598a7c8049681293.1645099283.git.christophe.leroy@csgroup.eu
|
|
CONFIG_MPROFILE_KERNEL is only for PPC64 and ftrace_mprofile.o
is build on PPC64 only when CONFIG_MPROFILE_KERNEL is defined.
Move saving of r0 inside #ifdef PPC64
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/619dfb672bf4f1b777a4b3f8b4f14e637fea2716.1645099283.git.christophe.leroy@csgroup.eu
|
|
ftrace_caller() and frace_regs_caller() have now a lot in common.
Refactor them using GAS macros.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9d7df9e4fc98a86051489f61d3c9bc67f92f7e27.1645099283.git.christophe.leroy@csgroup.eu
|
|
For the same reason as commit a85c728cb5e1 ("powerpc/32: Don't use
lmw/stmw for saving/restoring non volatile regs"), don't use
lmw/stmw in ftrace_regs_caller().
Use the same macros for PPC32 and PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ec286d2cc6989668a96f14543275437d2f3f0e3a.1645099283.git.christophe.leroy@csgroup.eu
|
|
In realmode mce handler we use irq_work_queue() to defer
the processing of mce events, irq_work_queue() can only
be called when translation is enabled because it touches
memory outside RMA, hence we enable translation before
calling irq_work_queue and disable on return, though it
is not safe to do in realmode.
To avoid this, program the decrementer and call the event
processing functions from timer handler.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220120121931.517974-1-ganeshgr@linux.ibm.com
|
|
To avoid ambiguity, modify the strings in real address error
logging messages to "foreign/control memory" from "foreign",
Since the error discriptions in P9 user manual and P10 user
manual are different for same type of errors.
P9 User Manual for MCE:
DSISR:59 Host real address to foreign space during translation.
DSISR:60 Host real address to foreign space on a load or store
access.
P10 User Manual for MCE:
DSISR:59 D-side tablewalk used a host real address in the
control memory address range.
DSISR:60 D-side operand access to control memory address space.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220107141428.67862-3-ganeshgr@linux.ibm.com
|
|
Merge a topic branch we are maintaining with some cross-architecture
changes to function descriptor handling and their use in LKDTM.
From Christophe's cover letter:
Fix LKDTM for PPC64/IA64/PARISC
PPC64/IA64/PARISC have function descriptors. LKDTM doesn't work on those
three architectures because LKDTM messes up function descriptors with
functions.
This series does some cleanup in the three architectures and refactors
function descriptors so that it can then easily use it in a generic way
in LKDTM.
|
