summaryrefslogtreecommitdiff
path: root/arch/powerpc/lib
AgeCommit message (Collapse)Author
2021-03-26powerpc/net: Switch csum_and_copy_{to/from}_user to user_access blockChristophe Leroy
Use user_access_begin() instead of the might_sleep/access_ok/allow_access sequence. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2dee286d2d6dc9a27d99e31ac564bad4fae2cb49.1615398498.git.christophe.leroy@csgroup.eu
2021-03-26powerpc/lib: Don't use __put_user_asm_goto() outside of uaccess.hChristophe Leroy
__put_user_asm_goto() is internal to uaccess.h Use __put_kernel_nofault() instead. The generated code is identical. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3e32c4f0361933909368b68f5ee569e5de661c1b.1615398498.git.christophe.leroy@csgroup.eu
2021-03-02powerpc/sstep: Fix VSX instruction emulationJordan Niethe
Commit af99da74333b ("powerpc/sstep: Support VSX vector paired storage access instructions") added loading and storing 32 word long data into adjacent VSRs. However the calculation used to determine if two VSRs needed to be loaded/stored inadvertently prevented the load/storing taking place for instructions with a data length less than 16 words. This causes the emulation to not function correctly, which can be seen by the alignment_handler selftest: $ ./alignment_handler [snip] test: test_alignment_handler_vsx_207 tags: git_version:powerpc-5.12-1-0-g82d2c16b350f VSX: 2.07B Doing lxsspx: PASSED Doing lxsiwax: FAILED: Wrong Data Doing lxsiwzx: PASSED Doing stxsspx: PASSED Doing stxsiwx: PASSED failure: test_alignment_handler_vsx_207 test: test_alignment_handler_vsx_300 tags: git_version:powerpc-5.12-1-0-g82d2c16b350f VSX: 3.00B Doing lxsd: PASSED Doing lxsibzx: PASSED Doing lxsihzx: PASSED Doing lxssp: FAILED: Wrong Data Doing lxv: PASSED Doing lxvb16x: PASSED Doing lxvh8x: PASSED Doing lxvx: PASSED Doing lxvwsx: FAILED: Wrong Data Doing lxvl: PASSED Doing lxvll: PASSED Doing stxsd: PASSED Doing stxsibx: PASSED Doing stxsihx: PASSED Doing stxssp: PASSED Doing stxv: PASSED Doing stxvb16x: PASSED Doing stxvh8x: PASSED Doing stxvx: PASSED Doing stxvl: PASSED Doing stxvll: PASSED failure: test_alignment_handler_vsx_300 [snip] Fix this by making sure all VSX instruction emulation correctly load/store from the VSRs. Fixes: af99da74333b ("powerpc/sstep: Support VSX vector paired storage access instructions") Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210225031946.1458206-1-jniethe5@gmail.com
2021-02-25Merge tag 'kbuild-v5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Fix false-positive build warnings for ARCH=ia64 builds - Optimize dictionary size for module compression with xz - Check the compiler and linker versions in Kconfig - Fix misuse of extra-y - Support DWARF v5 debug info - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x exceeded the limit - Add generic syscall{tbl,hdr}.sh for cleanups across arches - Minor cleanups of genksyms - Minor cleanups of Kconfig * tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits) initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD kbuild: remove deprecated 'always' and 'hostprogs-y/m' kbuild: parse C= and M= before changing the working directory kbuild: reuse this-makefile to define abs_srctree kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig kconfig: omit --oldaskconfig option for 'make config' kconfig: fix 'invalid option' for help option kconfig: remove dead code in conf_askvalue() kconfig: clean up nested if-conditionals in check_conf() kconfig: Remove duplicate call to sym_get_string_value() Makefile: Remove # characters from compiler string Makefile: reuse CC_VERSION_TEXT kbuild: check the minimum linker version in Kconfig kbuild: remove ld-version macro scripts: add generic syscallhdr.sh scripts: add generic syscalltbl.sh arch: syscalls: remove $(srctree)/ prefix from syscall tables arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work gen_compile_commands: prune some directories kbuild: simplify access to the kernel's version ...
2021-02-22Merge tag 'powerpc-5.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A large series adding wrappers for our interrupt handlers, so that irq/nmi/user tracking can be isolated in the wrappers rather than spread in each handler. - Conversion of the 32-bit syscall handling into C. - A series from Nick to streamline our TLB flushing when using the Radix MMU. - Switch to using queued spinlocks by default for 64-bit server CPUs. - A rework of our PCI probing so that it happens later in boot, when more generic infrastructure is available. - Two small fixes to allow 32-bit little-endian processes to run on 64-bit kernels. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun. * tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits) powerpc/perf: Adds support for programming of Thresholding in P10 powerpc/pci: Remove unimplemented prototypes powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user() powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size() powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user() powerpc/64: Fix stack trace not displaying final frame powerpc/time: Remove get_tbl() powerpc/time: Avoid using get_tbl() spi: mpc52xx: Avoid using get_tbl() powerpc/syscall: Avoid storing 'current' in another pointer powerpc/32: Handle bookE debugging in C in syscall entry/exit powerpc/syscall: Do not check unsupported scv vector on PPC32 powerpc/32: Remove the counter in global_dbcr0 powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry powerpc/syscall: implement system call entry/exit logic in C for PPC32 powerpc/32: Always save non volatile GPRs at syscall entry powerpc/syscall: Change condition to check MSR_RI powerpc/syscall: Save r3 in regs->orig_r3 powerpc/syscall: Use is_compat_task() powerpc/syscall: Make interrupt.c buildable on PPC32 ...
2021-02-12kbuild: LD_VERSION redenominationMasahiro Yamada
Commit ccbef1674a15 ("Kbuild, lto: add ld-version and ld-ifversion macros") introduced scripts/ld-version.sh for GCC LTO. At that time, this script handled 5 version fields because GCC LTO needed the downstream binutils. (https://lkml.org/lkml/2014/4/8/272) The code snippet from the submitted patch was as follows: # We need HJ Lu's Linux binutils because mainline binutils does not # support mixing assembler and LTO code in the same ld -r object. # XXX check if the gcc plugin ld is the expected one too # XXX some Fedora binutils should also support it. How to check for that? ifeq ($(call ld-ifversion,-ge,22710001,y),y) ... However, GCC LTO was not merged into the mainline after all. (https://lkml.org/lkml/2014/4/8/272) So, the 4th and 5th fields were never used, and finally removed by commit 0d61ed17dd30 ("ld-version: Drop the 4th and 5th version components"). Since then, the last 4-digits returned by this script is always zeros. Remove the meaningless last 4-digits. This makes the version format consistent with GCC_VERSION, CLANG_VERSION, LLD_VERSION. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-09powerpc/sstep: Fix darn emulationSandipan Das
Commit 8813ff49607e ("powerpc/sstep: Check instruction validity against ISA version before emulation") introduced a proper way to skip unknown instructions. This makes sure that the same is used for the darn instruction when the range selection bits have a reserved value. Fixes: a23987ef267a ("powerpc: sstep: Add support for darn instruction") Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210204080744.135785-2-sandipan@linux.ibm.com
2021-02-09powerpc/sstep: Fix load-store and update emulationSandipan Das
The Power ISA says that the fixed-point load and update instructions must neither use R0 for the base address (RA) nor have the destination (RT) and the base address (RA) as the same register. Similarly, for fixed-point stores and floating-point loads and stores, the instruction is invalid when R0 is used as the base address (RA). This is applicable to the following instructions. * Load Byte and Zero with Update (lbzu) * Load Byte and Zero with Update Indexed (lbzux) * Load Halfword and Zero with Update (lhzu) * Load Halfword and Zero with Update Indexed (lhzux) * Load Halfword Algebraic with Update (lhau) * Load Halfword Algebraic with Update Indexed (lhaux) * Load Word and Zero with Update (lwzu) * Load Word and Zero with Update Indexed (lwzux) * Load Word Algebraic with Update Indexed (lwaux) * Load Doubleword with Update (ldu) * Load Doubleword with Update Indexed (ldux) * Load Floating Single with Update (lfsu) * Load Floating Single with Update Indexed (lfsux) * Load Floating Double with Update (lfdu) * Load Floating Double with Update Indexed (lfdux) * Store Byte with Update (stbu) * Store Byte with Update Indexed (stbux) * Store Halfword with Update (sthu) * Store Halfword with Update Indexed (sthux) * Store Word with Update (stwu) * Store Word with Update Indexed (stwux) * Store Doubleword with Update (stdu) * Store Doubleword with Update Indexed (stdux) * Store Floating Single with Update (stfsu) * Store Floating Single with Update Indexed (stfsux) * Store Floating Double with Update (stfdu) * Store Floating Double with Update Indexed (stfdux) E.g. the following behaviour is observed for an invalid load and update instruction having RA = RT. While a userspace program having an instruction word like 0xe9ce0001, i.e. ldu r14, 0(r14), runs without getting receiving a SIGILL on a Power system (observed on P8 and P9), the outcome of executing that instruction word varies and its behaviour can be considered to be undefined. Attaching an uprobe at that instruction's address results in emulation which currently performs the load as well as writes the effective address back to the base register. This might not match the outcome from hardware. To remove any inconsistencies, this adds additional checks for the aforementioned instructions to make sure that the emulation infrastructure treats them as unknown. The kernel can then fallback to executing such instructions on hardware. Fixes: 0016a4cf5582 ("powerpc: Emulate most Book I instructions in emulate_step()") Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210204080744.135785-1-sandipan@linux.ibm.com
2021-01-30powerpc/sstep: Fix array out of bound warningRavi Bangoria
Compiling kernel with -Warray-bounds throws below warning: In function 'emulate_vsx_store': warning: array subscript is above array bounds [-Warray-bounds] buf.d[2] = byterev_8(reg->d[1]); ~~~~~^~~ buf.d[3] = byterev_8(reg->d[0]); ~~~~~^~~ Fix it by using temporary array variable 'union vsx_reg buf32[]' in that code block. Also, with element_size = 32, 'union vsx_reg *reg' is an array of size 2. So, use 'reg' as an array instead of pointer in the same code block. Fixes: af99da74333b ("powerpc/sstep: Support VSX vector paired storage access instructions") Suggested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210129071745.111466-1-ravi.bangoria@linux.ibm.com
2021-01-30powerpc/sstep: Fix incorrect return from analyze_instr()Ananth N Mavinakayanahalli
We currently just percolate the return value from analyze_instr() to the caller of emulate_step(), especially if it is a -1. For one particular case (opcode = 4) for instructions that aren't currently emulated, we are returning 'should not be single-stepped' while we should have returned 0 which says 'did not emulate, may have to single-step'. Fixes: 930d6288a26787 ("powerpc: sstep: Add support for maddhd, maddhdu, maddld instructions") Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/161157999039.64773.14950289716779364766.stgit@thinktux.local
2021-01-30powerpc/sstep: Check instruction validity against ISA version before emulationAnanth N Mavinakayanahalli
We currently unconditionally try to emulate newer instructions on older Power versions that could cause issues. Gate it. Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code") Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/161157995977.64773.13794501093457185080.stgit@thinktux.local
2021-01-30powerpc/pmem: Include pmem prototypesCédric Le Goater
It fixes this W=1 compile error : ../arch/powerpc/lib/pmem.c:51:6: error: no previous prototype for ‘arch_wb_cache_pmem’ [-Werror=missing-prototypes] 51 | void arch_wb_cache_pmem(void *addr, size_t size) | ^~~~~~~~~~~~~~~~~~ ../arch/powerpc/lib/pmem.c:58:6: error: no previous prototype for ‘arch_invalidate_pmem’ [-Werror=missing-prototypes] 58 | void arch_invalidate_pmem(void *addr, size_t size) | ^~~~~~~~~~~~~~~~~~~~ Fixes: 32ce3862af3c ("powerpc/lib: Implement PMEM API") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-6-clg@kaod.org
2021-01-20powerpc/64s: fix scv entry fallback flush vs interruptNicholas Piggin
The L1D flush fallback functions are not recoverable vs interrupts, yet the scv entry flush runs with MSR[EE]=1. This can result in a timer (soft-NMI) or MCE or SRESET interrupt hitting here and overwriting the EXRFI save area, which ends up corrupting userspace registers for scv return. Fix this by disabling RI and EE for the scv entry fallback flush. Fixes: f79643787e0a0 ("powerpc/64s: flush L1D on kernel entry") Cc: stable@vger.kernel.org # 5.9+ which also have flush L1D patch backport Reported-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210111062408.287092-1-npiggin@gmail.com
2020-12-11powerpc/sstep: Add testcases for VSX vector paired load/store instructionsBalamuruhan S
Add testcases for VSX vector paired load/store instructions. Sample o/p: emulate_step_test: lxvp : PASS emulate_step_test: stxvp : PASS emulate_step_test: lxvpx : PASS emulate_step_test: stxvpx : PASS emulate_step_test: plxvp : PASS emulate_step_test: pstxvp : PASS Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201011050908.72173-6-ravi.bangoria@linux.ibm.com
2020-12-11powerpc/sstep: Support VSX vector paired storage access instructionsBalamuruhan S
VSX Vector Paired instructions loads/stores an octword (32 bytes) from/to storage into two sequential VSRs. Add emulation support for these new instructions: * Load VSX Vector Paired (lxvp) * Load VSX Vector Paired Indexed (lxvpx) * Prefixed Load VSX Vector Paired (plxvp) * Store VSX Vector Paired (stxvp) * Store VSX Vector Paired Indexed (stxvpx) * Prefixed Store VSX Vector Paired (pstxvp) [kernel test robot reported a build failure] Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201011050908.72173-4-ravi.bangoria@linux.ibm.com
2020-12-11powerpc/sstep: Cover new VSX instructions under CONFIG_VSXRavi Bangoria
Recently added Power10 prefixed VSX instruction are included unconditionally in the kernel. If they are executed on a machine without VSX support, it might create issues. Fix that. Also fix one mnemonics spelling mistake in comment. Fixes: 50b80a12e4cc ("powerpc sstep: Add support for prefixed load/stores") Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201011050908.72173-3-ravi.bangoria@linux.ibm.com
2020-12-11powerpc/sstep: Emulate prefixed instructions only when CPU_FTR_ARCH_31 is setBalamuruhan S
Unconditional emulation of prefixed instructions will allow emulation of them on Power10 predecessors which might cause issues. Restrict that. Fixes: 3920742b92f5 ("powerpc sstep: Add support for prefixed fixed-point arithmetic") Fixes: 50b80a12e4cc ("powerpc sstep: Add support for prefixed load/stores") Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201011050908.72173-2-ravi.bangoria@linux.ibm.com
2020-12-04powerpc/feature-fixups: use a semicolon rather than a commaDaniel Axtens
In a bunch of our security flushes, we use a comma rather than a semicolon to 'terminate' an assignment. Nothing breaks, but checkpatch picks it up if you copy it into another flush. Switch to semicolons for ending statements. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201201144344.1228421-1-dja@axtens.net
2020-11-19powerpc/64s: flush L1D after user accessesNicholas Piggin
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache after user accesses. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2020-11-19powerpc/64s: flush L1D on kernel entryNicholas Piggin
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache on kernel entry. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2020-10-22Merge branch 'work.set_fs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode
2020-10-16Merge tag 'powerpc-5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for powerpc, as well as a related fix for sparc. - Remove support for PowerPC 601. - Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA v3.1 (Power10) watchpoint features. - A fix for kernels using 4K pages and the hash MMU on bare metal Power9 systems with > 16TB of RAM, or RAM on the 2nd node. - A basic idle driver for shallow stop states on Power10. - Tweaks to our sched domains code to better inform the scheduler about the hardware topology on Power9/10, where two SMT4 cores can be presented by firmware as an SMT8 core. - A series doing further reworks & cleanups of our EEH code. - Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to prevent root from overwriting kernel memory. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt, Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang Yingliang, zhengbin. * tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits) Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed" selftests/powerpc: Fix eeh-basic.sh exit codes cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier powerpc/time: Make get_tb() common to PPC32 and PPC64 powerpc/time: Make get_tbl() common to PPC32 and PPC64 powerpc/time: Remove get_tbu() powerpc/time: Avoid using get_tbl() and get_tbu() internally powerpc/time: Make mftb() common to PPC32 and PPC64 powerpc/time: Rename mftbl() to mftb() powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S powerpc/32s: Rename head_32.S to head_book3s_32.S powerpc/32s: Setup the early hash table at all time. powerpc/time: Remove ifdef in get_dec() and set_dec() powerpc: Remove get_tb_or_rtc() powerpc: Remove __USE_RTC() powerpc: Tidy up a bit after removal of PowerPC 601. powerpc: Remove support for PowerPC 601 powerpc: Remove PowerPC 601 powerpc: Drop SYNC_601() ISYNC_601() and SYNC() powerpc: Remove CONFIG_PPC601_SYNC_FIX ...
2020-10-14powerpc32: don't adjust unmoved stack pointer in csum_partial_copy_generic() ↵Jason A. Donenfeld
epilogue A recent change to the checksum code removed usage of some extra arguments, alongside with storage on the stack for those, and the stack pointer no longer needed to be adjusted in the function prologue. But a left over subtraction wasn't removed in the function epilogue, causing the function to return with the stack pointer moved 16 bytes away from where it should have. This corrupted local state and lead to weird crashes. This simply removes the leftover instruction from the epilogue. Fixes: 70d65cd555c5 ("ppc: propagate the calling conventions change down to csum_partial_copy_generic()") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-12Merge branch 'work.csum_and_copy' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull copy_and_csum cleanups from Al Viro: "Saner calling conventions for csum_and_copy_..._user() and friends" [ Removing 800+ lines of code and cleaning stuff up is good - Linus ] * 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ppc: propagate the calling conventions change down to csum_partial_copy_generic() amd64: switch csum_partial_copy_generic() to new calling conventions sparc64: propagate the calling convention changes down to __csum_partial_copy_...() xtensa: propagate the calling conventions change down into csum_partial_copy_generic() mips: propagate the calling convention change down into __csum_partial_copy_..._user() mips: __csum_partial_copy_kernel() has no users left mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic() i386: propagate the calling conventions change down to csum_partial_copy_generic() sh: propage the calling conventions change down to csum_partial_copy_generic() m68k: get rid of zeroing destination on error in csum_and_copy_from_user() arm: propagate the calling convention changes down to csum_partial_copy_from_user() alpha: propagate the calling convention changes down to csum_partial_copy.c helpers saner calling conventions for csum_and_copy_..._user() csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum csum_partial_copy_nocheck(): drop the last argument unify generic instances of csum_partial_copy_nocheck() icmp_push_reply(): reorder adding the checksum up skb_copy_and_csum_bits(): don't bother with the last argument
2020-10-06x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()Dan Williams
In reaction to a proposal to introduce a memcpy_mcsafe_fast() implementation Linus points out that memcpy_mcsafe() is poorly named relative to communicating the scope of the interface. Specifically what addresses are valid to pass as source, destination, and what faults / exceptions are handled. Of particular concern is that even though x86 might be able to handle the semantics of copy_mc_to_user() with its common copy_user_generic() implementation other archs likely need / want an explicit path for this case: On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote: > > > > However now I see that copy_user_generic() works for the wrong reason. > > It works because the exception on the source address due to poison > > looks no different than a write fault on the user address to the > > caller, it's still just a short copy. So it makes copy_to_user() work > > for the wrong reason relative to the name. > > Right. > > And it won't work that way on other architectures. On x86, we have a > generic function that can take faults on either side, and we use it > for both cases (and for the "in_user" case too), but that's an > artifact of the architecture oddity. > > In fact, it's probably wrong even on x86 - because it can hide bugs - > but writing those things is painful enough that everybody prefers > having just one function. Replace a single top-level memcpy_mcsafe() with either copy_mc_to_user(), or copy_mc_to_kernel(). Introduce an x86 copy_mc_fragile() name as the rename for the low-level x86 implementation formerly named memcpy_mcsafe(). It is used as the slow / careful backend that is supplanted by a fast copy_mc_generic() in a follow-on patch. One side-effect of this reorganization is that separating copy_mc_64.S to its own file means that perf no longer needs to track dependencies for its memcpy_64.S benchmarks. [ bp: Massage a bit. ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: <stable@vger.kernel.org> Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-09-18powerpc/sstep: Remove empty if statement checking for invalid formCédric Le Goater
The check should be performed by the caller. This fixes a compile error with W=1. ../arch/powerpc/lib/sstep.c: In function ‘mlsd_8lsd_ea’: ../arch/powerpc/lib/sstep.c:225:3: error: suggest braces around empty body in an ‘if’ statement [-Werror=empty-body] ; /* Invalid form. Should already be checked for by caller! */ ^ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200914211007.2285999-4-clg@kaod.org
2020-09-15powerpc/uaccess: Switch __patch_instruction() to __put_user_asm_goto()Christophe Leroy
__patch_instruction() is the only user of __put_user_asm() outside of asm/uaccess.h Switch to the new __put_user_asm_goto() to enable retirement of __put_user_asm() in a later patch. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b9745b122f4a9ae72cef445c61320022ab8b77b7.1599216721.git.christophe.leroy@csgroup.eu
2020-09-08powerpc: remove address space overrides using set_fs()Christoph Hellwig
Stop providing the possibility to override the address space using set_fs() now that there is no need for that any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20ppc: propagate the calling conventions change down to ↵Al Viro
csum_partial_copy_generic() ... and get rid of the pointless fallback in the wrappers. On error it used to zero the unwritten area and calculate the csum of the entire thing. Not wanting to do it in assembler part had been very reasonable; doing that in the first place, OTOH... In case of an error the caller discards the data we'd copied, along with whatever checksum it might've had. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20saner calling conventions for csum_and_copy_..._user()Al Viro
All callers of these primitives will * discard anything we might've copied in case of error * ignore the csum value in case of error * always pass 0xffffffff as the initial sum, so the resulting csum value (in case of success, that is) will never be 0. That suggest the following calling conventions: * don't pass err_ptr - just return 0 on error. * don't bother with zeroing destination, etc. in case of error * don't pass the initial sum - just use 0xffffffff. This commit does the minimal conversion in the instances of csum_and_copy_...(); the changes of actual asm code behind them are done later in the series. Note that this asm code is often shared with csum_partial_copy_nocheck(); the difference is that csum_partial_copy_nocheck() passes 0 for initial sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are free to pass 0xffffffff in all cases and subsequent patches will use that freedom without any special comments. A part that could be split off: parisc and uml/i386 claimed to have csum_and_copy_to_user() instances of their own, but those were identical to the generic one, so we simply drop them. Not sure if it's worth a separate commit... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-29powerpc/test_emulate_step: Add testcases for divde[.] and divdeu[.] instructionsBalamuruhan S
Add testcases for divde, divde., divdeu, divdeu. emulated instructions to cover few scenarios, - with same dividend and divisor to have undefine RT for divdeu[.] - with divide by zero to have undefine RT for both divde[.] and divdeu[.] - with negative dividend to cover -|divisor| < r <= 0 if the dividend is negative for divde[.] - normal case with proper dividend and divisor for both divde[.] and divdeu[.] Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200728130308.1790982-4-bala24@linux.ibm.com
2020-07-29powerpc/sstep: Add support for divde[.] and divdeu[.] instructionsBalamuruhan S
This patch adds emulation support for divde, divdeu instructions, - Divide Doubleword Extended (divde[.]) - Divide Doubleword Extended Unsigned (divdeu[.]) Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200728130308.1790982-3-bala24@linux.ibm.com
2020-07-27powerpc/lib: remove memcpy_flushcache redundant returnLi RongQing
Align it with other architectures and none of the callers has been interested its return Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1556278590-14727-1-git-send-email-lirongqing@baidu.com
2020-07-27powerpc/lib: Prepare code-patching for modules allocated outside vmalloc spaceChristophe Leroy
Use is_vmalloc_or_module_addr() instead of is_vmalloc_addr() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7d884db0e5a6f521331639d8c0f13e520d5a4fef.1593428200.git.christophe.leroy@csgroup.eu
2020-07-27powerpc/64s: Implement queued spinlocks and rwlocksNicholas Piggin
These have shown significantly improved performance and fairness when spinlock contention is moderate to high on very large systems. With this series including subsequent patches, on a 16 socket 1536 thread POWER9, a stress test such as same-file open/close from all CPUs gets big speedups, 11620op/s aggregate with simple spinlocks vs 384158op/s (33x faster), where the difference in throughput between the fastest and slowest thread goes from 7x to 1.4x. Thanks to the fast path being identical in terms of atomics and barriers (after a subsequent optimisation patch), single threaded performance is not changed (no measurable difference). On smaller systems, performance and fairness seems to be generally improved. Using dbench on tmpfs as a test (that starts to run into kernel spinlock contention), a 2-socket OpenPOWER POWER9 system was tested with bare metal and KVM guest configurations. Results can be found here: https://github.com/linuxppc/issues/issues/305#issuecomment-663487453 Observations are: - Queued spinlocks are equal when contention is insignificant, as expected and as measured with microbenchmarks. - When there is contention, on bare metal queued spinlocks have better throughput and max latency at all points. - When virtualised, queued spinlocks are slightly worse approaching peak throughput, but significantly better throughput and max latency at all points beyond peak, until queued spinlock maximum latency rises when clients are 2x vCPUs. The regressions haven't been analysed very well yet, there are a lot of things that can be tuned, particularly the paravirtualised locking, but the numbers already look like a good net win even on relatively small systems. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131423.1362108-4-npiggin@gmail.com
2020-07-26powerpc/pseries: Move some PAPR paravirt functions to their own fileNicholas Piggin
These functions will be used by the queued spinlock implementation, and may be useful elsewhere too, so move them out of spinlock.h. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Waiman Long <longman@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131423.1362108-2-npiggin@gmail.com
2020-07-24powerpc/sstep: Fix incorrect CONFIG symbol in scv handlingMichael Ellerman
When I "fixed" the ppc64e build in Nick's recent patch, I typoed the CONFIG symbol, resulting in one that doesn't exist. Fix it to use the correct symbol. Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131609.1640533-1-mpe@ellerman.id.au
2020-07-24powerpc/test_emulate_sstep: Fix build errorMichael Ellerman
ppc64_book3e_allmodconfig fails with: arch/powerpc/lib/test_emulate_step.c: In function 'test_pld': arch/powerpc/lib/test_emulate_step.c:113:7: error: implicit declaration of function 'cpu_has_feature' 113 | if (!cpu_has_feature(CPU_FTR_ARCH_31)) { | ^~~~~~~~~~~~~~~ Add an include of cpu_has_feature.h to fix it. Fixes: b6b54b42722a ("powerpc/sstep: Add tests for prefixed integer load/stores") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724004109.1461709-1-mpe@ellerman.id.au
2020-07-23Merge branch 'scv' support into nextMichael Ellerman
From Nick's cover letter: Linux powerpc new system call instruction and ABI System Call Vectored (scv) ABI ============================== The scv instruction is introduced with POWER9 / ISA3, it comes with an rfscv counter-part. The benefit of these instructions is performance (trading slower SRR0/1 with faster LR/CTR registers, and entering the kernel with MSR[EE] and MSR[RI] left enabled, which can reduce MSR updates. The scv instruction has 128 levels (not enough to cover the Linux system call space). Assignment and advertisement ---------------------------- The proposal is to assign scv levels conservatively, and advertise them with HWCAP feature bits as we add support for more. Linux has not enabled FSCR[SCV] yet, so executing the scv instruction will cause the kernel to log a "SCV facility unavilable" message, and deliver a SIGILL with ILL_ILLOPC to the process. Linux has defined a HWCAP2 bit PPC_FEATURE2_SCV for SCV support, but does not set it. This change allocates the zero level ('scv 0'), advertised with PPC_FEATURE2_SCV, which will be used to provide normal Linux system calls (equivalent to 'sc'). Attempting to execute scv with other levels will cause a SIGILL to be delivered the same as before, but will not log a "SCV facility unavailable" message (because the processor facility is enabled). Calling convention ------------------ The proposal is for scv 0 to provide the standard Linux system call ABI with the following differences from sc convention[1]: - LR is to be volatile across scv calls. This is necessary because the scv instruction clobbers LR. From previous discussion, this should be possible to deal with in GCC clobbers and CFI. - cr1 and cr5-cr7 are volatile. This matches the C ABI and would allow the kernel system call exit to avoid restoring the volatile cr registers (although we probably still would anyway to avoid information leaks). - Error handling: The consensus among kernel, glibc, and musl is to move to using negative return values in r3 rather than CR0[SO]=1 to indicate error, which matches most other architectures, and is closer to a function call. Notes ----- - r0,r4-r8 are documented as volatile in the ABI, but the kernel patch as submitted currently preserves them. This is to leave room for deciding which way to go with these. Some small benefit was found by preserving them[1] but I'm not convinced it's worth deviating from the C function call ABI just for this. Release code should follow the ABI. Previous discussions: https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/208691.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209268.html [1] https://github.com/torvalds/linux/blob/master/Documentation/powerpc/syscall64-abi.rst [2] https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209263.html
2020-07-23powerpc/test_emulate_step: Move extern declaration to sstep.hBalamuruhan S
fix checkpatch.pl warnings by moving extern declaration from source file to headerfile. Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200626095158.1031507-5-bala24@linux.ibm.com
2020-07-23powerpc/sstep: Introduce macros to retrieve Prefix instruction operandsBalamuruhan S
retrieve prefix instruction operands RA and pc relative bit R values using macros and adopt it in sstep.c and test_emulate_step.c. Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200626095158.1031507-4-bala24@linux.ibm.com
2020-07-23powerpc/test_emulate_step: Add negative tests for prefixed addiBalamuruhan S
testcases for `paddi` instruction to cover the negative case, if R is equal to 1 and RA is not equal to 0, the instruction form is invalid. Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200626095158.1031507-3-bala24@linux.ibm.com
2020-07-23powerpc/test_emulate_step: Enhancement to test negative scenariosBalamuruhan S
add provision to declare test is a negative scenario, verify whether emulation fails and avoid executing it. Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200626095158.1031507-2-bala24@linux.ibm.com
2020-07-23powerpc: Add a ppc_inst_as_str() helperJordan Niethe
There are quite a few places where instructions are printed, this is done using a '%x' format specifier. With the introduction of prefixed instructions, this does not work well. Currently in these places, ppc_inst_val() is used for the value for %x so only the first word of prefixed instructions are printed. When the instructions are word instructions, only a single word should be printed. For prefixed instructions both the prefix and suffix should be printed. To accommodate both of these situations, instead of a '%x' specifier use '%s' and introduce a helper, __ppc_inst_as_str() which returns a char *. The char * __ppc_inst_as_str() returns is buffer that is passed to it by the caller. It is cumbersome to require every caller of __ppc_inst_as_str() to now declare a buffer. To make it more convenient to use __ppc_inst_as_str(), wrap it in a macro that uses a compound statement to allocate a buffer on the caller's stack before calling it. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> [mpe: Drop 0x prefix to match most existings uses, especially xmon] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200602052728.18227-1-jniethe5@gmail.com
2020-07-23powerpc/sstep: Add tests for Prefixed Add ImmediateJordan Niethe
Use the existing support for testing compute type instructions to test Prefixed Add Immediate (paddi). The R bit of the paddi instruction controls whether current instruction address is used. Add test cases for when R=1 and for R=0. paddi has a 34 bit immediate field formed by concatenating si0 and si1. Add tests for the extreme values of this field. Skip the paddi tests if ISA v3.1 is unsupported. Some of these test cases were added by Balamuruhan S. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> [mpe: Fix conflicts with ppc-opcode.h changes, squash in .balign] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200525025923.19843-5-jniethe5@gmail.com
2020-07-23powerpc/sstep: Let compute tests specify a required cpu featureJordan Niethe
An a array of struct compute_test's are used to declare tests for compute instructions. Add a cpu_feature field to struct compute_test as an optional way to specify a cpu feature that must be present. If not present then skip the test. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200525025923.19843-4-jniethe5@gmail.com
2020-07-23powerpc/sstep: Set NIP in instruction emulation testsJordan Niethe
The tests for emulation of compute instructions execute and emulate an instruction and then compare the results to verify the emulation. In ISA v3.1 there are instructions that operate relative to the NIP. Therefore set the NIP in the regs used for the emulated instruction to the location of the executed instruction so they will give the same result. This is a rework of a patch by Balamuruhan S. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200525025923.19843-3-jniethe5@gmail.com
2020-07-23powerpc/sstep: Add tests for prefixed floating-point load/storesJordan Niethe
Add tests for the prefixed versions of the floating-point load/stores that are currently tested. This includes the following instructions: * Prefixed Load Floating-Point Single (plfs) * Prefixed Load Floating-Point Double (plfd) * Prefixed Store Floating-Point Single (pstfs) * Prefixed Store Floating-Point Double (pstfd) Skip the new tests if ISA v3.10 is unsupported. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> [mpe: Fix conflicts with ppc-opcode.h changes] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200525025923.19843-2-jniethe5@gmail.com
2020-07-23powerpc/sstep: Add tests for prefixed integer load/storesJordan Niethe
Add tests for the prefixed versions of the integer load/stores that are currently tested. This includes the following instructions: * Prefixed Load Doubleword (pld) * Prefixed Load Word and Zero (plwz) * Prefixed Store Doubleword (pstd) Skip the new tests if ISA v3.1 is unsupported. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> [mpe: Fix conflicts with ppc-opcode.h changes] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200525025923.19843-1-jniethe5@gmail.com
2020-07-22powerpc/64s: system call support for scv/rfscv instructionsNicholas Piggin
Add support for the scv instruction on POWER9 and later CPUs. For now this implements the zeroth scv vector 'scv 0', as identical to 'sc' system calls, with the exception that LR is not preserved, nor are volatile CR registers, and error is not indicated with CR0[SO], but by returning a negative errno. rfscv is implemented to return from scv type system calls. It can not be used to return from sc system calls because those are defined to preserve LR. getpid syscall throughput on POWER9 is improved by 26% (428 to 318 cycles), largely due to reducing mtmsr and mtspr. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix ppc64e build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611081203.995112-3-npiggin@gmail.com
generated by cgit (git 2.34.1) at 2025-03-20 13:30:59 +0000