| Age | Commit message (Collapse) | Author |
|---|
|
CONFIG_PIN_TLB maps IMMR area and the first 24 Mbytes of memory.
In some circunstances it might be more interesting to not map
IMMR but map 32 Mbytes of memory instead.
Therefore we add config option CONFIG_PIN_TLB_IMMR to select if
IMMR shall be pinned or not, hence whether we pin 24 or 32 Mbytes of RAM
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
On recent kernels, with some debug options like for instance
CONFIG_LOCKDEP, the BSS requires more than 8M memory, allthough
the kernel code fits in the first 8M.
Today, it is necessary to activate CONFIG_PIN_TLB to get more than 8M
at startup, allthough pinning TLB is not necessary for that.
We could have inconditionaly mapped 16 or 24M bytes at startup
but some old hardware only have 8M and mapping non-existing RAM
would be an issue due to speculative accesses.
With the preceding patch however, the TLB entries are populated on
demand. By setting up the TLB miss handler to handle up to 24M until
the handler is patched for the entire memory space, it is possible
to allow access up to more memory without mapping non-existing RAM.
It is therefore not needed anymore to map memory data at all
at startup. It will be handled by the TLB miss handler.
One might still want to PIN the IMMR and the first 24M of RAM.
It is now possible to do it in the C memory initialisation
functions. In addition, we now know how much memory we have
when we do it, so we are able to adapt the pining to the
real amount of memory available. So boards with less than 24M
can now also benefit from PIN_TLB.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Instead of using the first level page table to define mappings for
the linear memory space, we can use direct mapping from the TLB
handling routines. This has several advantages:
* No need to read the tables at each TLB miss
* No issue in 16k pages mode where the 1st level table maps 64 Mbytes
The size of the available linear space is known at system startup.
In order to avoid data access at each TLB miss to know the memory
size, the TLB routine is patched at startup with the proper size
This patch provides a 10%-15% improvment of TLB miss handling for
kernel addresses
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Once the linear memory space has been mapped with 8Mb pages, as
seen in the related commit, we get 11 millions DTLB missed during
the reference 600s period. 77% of the misses are on user addresses
and 23% are on kernel addresses (1 fourth for linear address space
and 3 fourth for virtual address space)
Traditionaly, each driver manages one computer board which has its
own components with its own memory maps.
But on embedded chips like the MPC8xx, the SOC has all registers
located in the same IO area.
When looking at ioremaps done during startup, we see that
many drivers are re-mapping small parts of the IMMR for their own use
and all those small pieces gets their own 4k page, amplifying the
number of TLB misses: in our system we get 0xff000000 mapped 31 times
and 0xff003000 mapped 9 times.
Even if each part of IMMR was mapped only once with 4k pages, it would
still be several small mappings towards linear area.
This patch maps the IMMR with a single 512k page.
With this patch applied, the number of DTLB misses during the 10 min
period is reduced to 11.8 millions for a duration of 5.8s, which
represents 2% of the non-idle time hence yet another 10% reduction.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
On PPC8xx, flushing instruction cache is performed by writing
in register SPRN_IC_CST. This registers suffers CPU6 ERRATA.
The patch rewrites the fonction in C so that CPU6 ERRATA will
be handled transparently
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
There is no real need to have set_context() in assembly.
Now that we have mtspr() handling CPU6 ERRATA directly, we
can rewrite set_context() in C language for easier maintenance.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Now we have a 8xx specific .c file for that so put it in there
as other powerpc variants do
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
On a live running system (VoIP gateway for Air Trafic Control), over
a 10 minutes period (with 277s idle), we get 87 millions DTLB misses
and approximatly 35 secondes are spent in DTLB handler.
This represents 5.8% of the overall time and even 10.8% of the
non-idle time.
Among those 87 millions DTLB misses, 15% are on user addresses and
85% are on kernel addresses. And within the kernel addresses, 93%
are on addresses from the linear address space and only 7% are on
addresses from the virtual address space.
MPC8xx has no BATs but it has 8Mb page size. This patch implements
mapping of kernel RAM using 8Mb pages, on the same model as what is
done on the 40x.
In 4k pages mode, each PGD entry maps a 4Mb area: we map every two
entries to the same 8Mb physical page. In each second entry, we add
4Mb to the page physical address to ease life of the FixupDAR
routine. This is just ignored by HW.
In 16k pages mode, each PGD entry maps a 64Mb area: each PGD entry
will point to the first page of the area. The DTLB handler adds
the 3 bits from EPN to map the correct page.
With this patch applied, we now get only 13 millions TLB misses
during the 10 minutes period. The idle time has increased to 313s
and the overall time spent in DTLB miss handler is 6.3s, which
represents 1% of the overall time and 2.2% of non-idle time.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
