summaryrefslogtreecommitdiff
path: root/arch/powerpc/mm
AgeCommit message (Collapse)Author
2019-04-17powerpc/mm_iommu: Allow pinning large regionsAlexey Kardashevskiy
When called with vmas_arg==NULL, get_user_pages_longterm() allocates an array of nr_pages*8 which can easily get greater that the max order, for example, registering memory for a 256GB guest does this and fails in __alloc_pages_nodemask(). This adds a loop over chunks of entries to fit the max order limit. Fixes: 678e174c4c16 ("powerpc/mm/iommu: allow migration of cma allocated pages during mm_iommu_do_alloc", 2019-03-05) Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-17powerpc/mm_iommu: Fix potential deadlockAlexey Kardashevskiy
Currently mm_iommu_do_alloc() is called in 2 cases: - VFIO_IOMMU_SPAPR_REGISTER_MEMORY ioctl() for normal memory: this locks &mem_list_mutex and then locks mm::mmap_sem several times when adjusting locked_vm or pinning pages; - vfio_pci_nvgpu_regops::mmap() for GPU memory: this is called with mm::mmap_sem held already and it locks &mem_list_mutex. So one can craft a userspace program to do special ioctl and mmap in 2 threads concurrently and cause a deadlock which lockdep warns about (below). We did not hit this yet because QEMU constructs the machine in a single thread. This moves the overlap check next to where the new entry is added and reduces the amount of time spent with &mem_list_mutex held. This moves locked_vm adjustment from under &mem_list_mutex. This relies on mm_iommu_adjust_locked_vm() doing nothing when entries==0. This is one of the lockdep warnings: ====================================================== WARNING: possible circular locking dependency detected 5.1.0-rc2-le_nv2_aikATfstn1-p1 #363 Not tainted ------------------------------------------------------ qemu-system-ppc/8038 is trying to acquire lock: 000000002ec6c453 (mem_list_mutex){+.+.}, at: mm_iommu_do_alloc+0x70/0x490 but task is already holding lock: 00000000fd7da97f (&mm->mmap_sem){++++}, at: vm_mmap_pgoff+0xf0/0x160 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mm->mmap_sem){++++}: lock_acquire+0xf8/0x260 down_write+0x44/0xa0 mm_iommu_adjust_locked_vm.part.1+0x4c/0x190 mm_iommu_do_alloc+0x310/0x490 tce_iommu_ioctl.part.9+0xb84/0x1150 [vfio_iommu_spapr_tce] vfio_fops_unl_ioctl+0x94/0x430 [vfio] do_vfs_ioctl+0xe4/0x930 ksys_ioctl+0xc4/0x110 sys_ioctl+0x28/0x80 system_call+0x5c/0x70 -> #0 (mem_list_mutex){+.+.}: __lock_acquire+0x1484/0x1900 lock_acquire+0xf8/0x260 __mutex_lock+0x88/0xa70 mm_iommu_do_alloc+0x70/0x490 vfio_pci_nvgpu_mmap+0xc0/0x130 [vfio_pci] vfio_pci_mmap+0x198/0x2a0 [vfio_pci] vfio_device_fops_mmap+0x44/0x70 [vfio] mmap_region+0x5d4/0x770 do_mmap+0x42c/0x650 vm_mmap_pgoff+0x124/0x160 ksys_mmap_pgoff+0xdc/0x2f0 sys_mmap+0x40/0x80 system_call+0x5c/0x70 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_sem); lock(mem_list_mutex); lock(&mm->mmap_sem); lock(mem_list_mutex); *** DEADLOCK *** 1 lock held by qemu-system-ppc/8038: #0: 00000000fd7da97f (&mm->mmap_sem){++++}, at: vm_mmap_pgoff+0xf0/0x160 Fixes: c10c21efa4bc ("powerpc/vfio/iommu/kvm: Do not pin device memory", 2018-12-19) Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-19powerpc/6xx: fix setup and use of SPRN_SPRG_PGDIR for hash32Christophe Leroy
Not only the 603 but all 6xx need SPRN_SPRG_PGDIR to be initialised at startup. This patch move it from __setup_cpu_603() to start_here() and __secondary_start(), close to the initialisation of SPRN_THREAD. Previously, virt addr of PGDIR was retrieved from thread struct. Now that it is the phys addr which is stored in SPRN_SPRG_PGDIR, hash_page() shall not convert it to phys anymore. This patch removes the conversion. Fixes: 93c4a162b014 ("powerpc/6xx: Store PGDIR physical address in a SPRG") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-16Merge tag 'powerpc-5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix to prevent runtime allocation of 16GB pages when running in a VM (as opposed to bare metal), because it doesn't work. A small fix to our recently added KCOV support to exempt some more code from being instrumented. Plus a few minor build fixes, a small dead code removal and a defconfig update. Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Christophe Leroy, Jason Yan, Joel Stanley, Mahesh Salgaonkar, Mathieu Malaterre" * tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Include <asm/nmi.h> header file to fix a warning powerpc/powernv: Fix compile without CONFIG_TRACEPOINTS powerpc/mm: Disable kcov for SLB routines powerpc: remove dead code in head_fsl_booke.S powerpc/configs: Sync skiroot defconfig powerpc/hugetlb: Don't do runtime allocation of 16G pages in LPAR configuration
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12memblock: drop memblock_alloc_base()Mike Rapoport
The memblock_alloc_base() function tries to allocate a memory up to the limit specified by its max_addr parameter and panics if the allocation fails. Replace its usage with memblock_phys_alloc_range() and make the callers check the return value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-10-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12memblock: memblock_phys_alloc_try_nid(): don't panicMike Rapoport
The memblock_phys_alloc_try_nid() function tries to allocate memory from the requested node and then falls back to allocation from any node in the system. The memblock_alloc_base() fallback used by this function panics if the allocation fails. Replace the memblock_alloc_base() fallback with the direct call to memblock_alloc_range_nid() and update the memblock_phys_alloc_try_nid() callers to check the returned value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-7-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12powerpc/mm: Disable kcov for SLB routinesMahesh Salgaonkar
The kcov instrumentation inside SLB routines causes duplicate SLB entries to be added resulting into SLB multihit machine checks. Disable kcov instrumentation on slb.o Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - some of the rest of MM - various misc things - dynamic-debug updates - checkpatch - some epoll speedups - autofs - rapidio - lib/, lib/lzo/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits) samples/mic/mpssd/mpssd.h: remove duplicate header kernel/fork.c: remove duplicated include include/linux/relay.h: fix percpu annotation in struct rchan arch/nios2/mm/fault.c: remove duplicate include unicore32: stop printing the virtual memory layout MAINTAINERS: fix GTA02 entry and mark as orphan mm: create the new vm_fault_t type arm, s390, unicore32: remove oneliner wrappers for memblock_alloc() arch: simplify several early memory allocations openrisc: simplify pte_alloc_one_kernel() sh: prefer memblock APIs returning virtual address microblaze: prefer memblock API returning virtual address powerpc: prefer memblock APIs returning virtual address lib/lzo: separate lzo-rle from lzo lib/lzo: implement run-length encoding lib/lzo: fast 8-byte copy on arm64 lib/lzo: 64-bit CTZ on arm64 lib/lzo: tidy-up ifdefs ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size ipc: annotate implicit fall through ...
2019-03-07arch: simplify several early memory allocationsMike Rapoport
There are several early memory allocations in arch/ code that use memblock_phys_alloc() to allocate memory, convert the returned physical address to the virtual address and then set the allocated memory to zero. Exactly the same behaviour can be achieved simply by calling memblock_alloc(): it allocates the memory in the same way as memblock_phys_alloc(), then it performs the phys_to_virt() conversion and clears the allocated memory. Replace the longer sequence with a simpler call to memblock_alloc(). Link: http://lkml.kernel.org/r/1546248566-14910-6-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07powerpc: prefer memblock APIs returning virtual addressMike Rapoport
Patch series "memblock: simplify several early memory allocation", v4. These patches simplify some of the early memory allocations by replacing usage of older memblock APIs with newer and shinier ones. Quite a few places in the arch/ code allocated memory using a memblock API that returns a physical address of the allocated area, then converted this physical address to a virtual one and then used memset(0) to clear the allocated range. More recent memblock APIs do all the three steps in one call and their usage simplifies the code. It's important to note that regardless of API used, the core allocation is nearly identical for any set of memblock allocators: first it tries to find a free memory with all the constraints specified by the caller and then falls back to the allocation with some or all constraints disabled. The first three patches perform the conversion of call sites that have exact requirements for the node and the possible memory range. The fourth patch is a bit one-off as it simplifies openrisc's implementation of pte_alloc_one_kernel(), and not only the memblock usage. The fifth patch takes care of simpler cases when the allocation can be satisfied with a simple call to memblock_alloc(). The sixth patch removes one-liner wrappers for memblock_alloc on arm and unicore32, as suggested by Christoph. This patch (of 6): There are a several places that allocate memory using memblock APIs that return a physical address, convert the returned address to the virtual address and frequently also memset(0) the allocated range. Update these places to use memblock allocators already returning a virtual address. Use memblock functions that clear the allocated memory instead of calling memset(0) where appropriate. The calls to memblock_alloc_base() that were not followed by memset(0) are replaced with memblock_alloc_try_nid_raw(). Since the latter does not panic() when the allocation fails, the appropriate panic() calls are added to the call sites. Link: http://lkml.kernel.org/r/1546248566-14910-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Greentime Hu <green.hu@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mark Salter <msalter@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07Merge tag 'powerpc-5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Enable THREAD_INFO_IN_TASK to move thread_info off the stack. - A big series from Christoph reworking our DMA code to use more of the generic infrastructure, as he said: "This series switches the powerpc port to use the generic swiotlb and noncoherent dma ops, and to use more generic code for the coherent direct mapping, as well as removing a lot of dead code." - Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing us to support machines with larger amounts of total RAM or distance between nodes. - Two series from Christophe, one to optimise TLB miss handlers on 6xx, and another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit CPUs. - Support for KCOV coverage instrumentation which means we can run syzkaller and discover even more bugs in our code. And as always many clean-ups, reworks and minor fixes etc. Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/32: Clear on-stack exception marker upon exception return powerpc: Remove export of save_stack_trace_tsk_reliable() powerpc/mm: fix "section_base" set but not used powerpc/mm: Fix "sz" set but not used warning powerpc/mm: Check secondary hash page table powerpc: remove nargs from __SYSCALL powerpc/64s: Fix unrelocated interrupt trampoline address test powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables powerpc/fsl: Fix the flush of branch predictor. powerpc/powernv: Make opal log only readable by root powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C powerpc/64s: Fix data interrupts vs d-side MCE reentrancy powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy powerpc/64s: system reset interrupt preserve HSRRs powerpc/64s: Fix HV NMI vs HV interrupt recoverability test powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback selftests/powerpc: Remove duplicate header powerpc sstep: Add support for modsd, modud instructions ...
2019-03-05numa: make "nr_node_ids" unsigned intAlexey Dobriyan
Number of NUMA nodes can't be negative. This saves a few bytes on x86_64: add/remove: 0/0 grow/shrink: 4/21 up/down: 27/-265 (-238) Function old new delta hv_synic_alloc.cold 88 110 +22 prealloc_shrinker 260 262 +2 bootstrap 249 251 +2 sched_init_numa 1566 1567 +1 show_slab_objects 778 777 -1 s_show 1201 1200 -1 kmem_cache_init 346 345 -1 __alloc_workqueue_key 1146 1145 -1 mem_cgroup_css_alloc 1614 1612 -2 __do_sys_swapon 4702 4699 -3 __list_lru_init 655 651 -4 nic_probe 2379 2374 -5 store_user_store 118 111 -7 red_zone_store 106 99 -7 poison_store 106 99 -7 wq_numa_init 348 338 -10 __kmem_cache_empty 75 65 -10 task_numa_free 186 173 -13 merge_across_nodes_store 351 336 -15 irq_create_affinity_masks 1261 1246 -15 do_numa_crng_init 343 321 -22 task_numa_fault 4760 4737 -23 swapfile_init 179 156 -23 hv_synic_alloc 536 492 -44 apply_wqattrs_prepare 746 695 -51 Link: http://lkml.kernel.org/r/20190201223029.GA15820@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05powerpc/mm/iommu: allow large IOMMU page size only for hugetlb backingAneesh Kumar K.V
THP pages can get split during different code paths. An incremented reference count does imply we will not split the compound page. But the pmd entry can be converted to level 4 pte entries. Keep the code simpler by allowing large IOMMU page size only if the guest ram is backed by hugetlb pages. Link: http://lkml.kernel.org/r/20190114095438.32470-6-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05powerpc/mm/iommu: allow migration of cma allocated pages during ↵Aneesh Kumar K.V
mm_iommu_do_alloc The current code doesn't do page migration if the page allocated is a compound page. With HugeTLB migration support, we can end up allocating hugetlb pages from CMA region. Also, THP pages can be allocated from CMA region. This patch updates the code to handle compound pages correctly. The patch also switches to a single get_user_pages with the right count, instead of doing one get_user_pages per page. That avoids reading page table multiple times. This is done by using get_user_pages_longterm, because that also takes care of DAX backed pages. DAX pages lifetime is dictated by file system rules and as such, we need to make sure that we free these pages on operations like truncate and punch hole. If we have long term pin on these pages, which are mostly return to userspace with elevated page count, the entity holding the long term pin may not be aware of the fact that file got truncated and the file system blocks possibly got reused. That can result in corruption. The patch also converts the hpas member of mm_iommu_table_group_mem_t to a union. We use the same storage location to store pointers to struct page. We cannot update all the code path use struct page *, because we access hpas in real mode and we can't do that struct page * to pfn conversion in real mode. [aneesh.kumar@linux.ibm.com: address review feedback, update changelog] Link: http://lkml.kernel.org/r/20190227144736.5872-4-aneesh.kumar@linux.ibm.com Link: http://lkml.kernel.org/r/20190114095438.32470-5-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05arch/powerpc/mm/hugetlb: NestMMU workaround for hugetlb mprotect RW upgradeAneesh Kumar K.V
NestMMU requires us to mark the pte invalid and flush the tlb when we do a RW upgrade of pte. We fixed a variant of this in the fault path in bd5050e38aec ("powerpc/mm/radix: Change pte relax sequence to handle nest MMU hang"). Link: http://lkml.kernel.org/r/20190116085035.29729-6-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05arch/powerpc/mm: Nest MMU workaround for mprotect RW upgradeAneesh Kumar K.V
NestMMU requires us to mark the pte invalid and flush the tlb when we do a RW upgrade of pte. We fixed a variant of this in the fault path in bd5050e38aec ("powerpc/mm/radix: Change pte relax sequence to handle nest MMU hang"). Do the same for mprotect upgrades. Hugetlb is handled in the next patch. Link: http://lkml.kernel.org/r/20190116085035.29729-4-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05mm: replace all open encodings for NUMA_NO_NODEAnshuman Khandual
Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-02powerpc/mm: fix "section_base" set but not usedQian Cai
The commit 24b6d4164348 ("mm: pass the vmem_altmap to vmemmap_free") removed a line in vmemmap_free(), altmap = to_vmem_altmap((unsigned long) section_base); but left a variable no longer used. arch/powerpc/mm/init_64.c: In function 'vmemmap_free': arch/powerpc/mm/init_64.c:277:16: error: variable 'section_base' set but not used [-Werror=unused-but-set-variable] Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-02powerpc/mm: Fix "sz" set but not used warningQian Cai
Fix compiler warning: arch/powerpc/mm/hugetlbpage-hash64.c: In function '__hash_page_huge': arch/powerpc/mm/hugetlbpage-hash64.c:29:28: warning: variable 'sz' set but not used [-Wunused-but-set-variable] mpe: The last usage of sz was removed in 0895ecda7942 ("powerpc/mm: Bring hugepage PTE accessor functions back into sync with normal accessors"). Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-02powerpc/mm: Check secondary hash page tableRashmica Gupta
We were always calling base_hpte_find() with primary = true, even when we wanted to check the secondary table. mpe: I broke this when refactoring Rashmica's original patch. Fixes: 1515ab932156 ("powerpc/mm: Dump hash table") Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-26powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown ↵Aneesh Kumar K.V
search When doing top-down search the low_limit is not PAGE_SIZE but rather max(PAGE_SIZE, mmap_min_addr). This handle cases in which mmap_min_addr > PAGE_SIZE. Fixes: fba2369e6ceb ("mm: use vm_unmapped_area() on powerpc architecture") Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-26powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callbackAneesh Kumar K.V
After we ALIGN up the address we need to make sure we didn't overflow and resulted in zero address. In that case, we need to make sure that the returned address is greater than mmap_min_addr. This fixes selftest va_128TBswitch --run-hugetlb reporting failures when run as non root user for mmap(-1, MAP_HUGETLB) The bug is that a non-root user requesting address -1 will be given address 0 which will then fail, whereas they should have been given something else that would have succeeded. We also avoid the first mmap(-1, MAP_HUGETLB) returning NULL address as mmap address with this change. So we think this is not a security issue, because it only affects whether we choose an address below mmap_min_addr, not whether we actually allow that address to be mapped. ie. there are existing capability checks to prevent a user mapping below mmap_min_addr and those will still be honoured even without this fix. Fixes: 484837601d4d ("powerpc/mm: Add radix support for hugetlb") Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPUChristophe Leroy
Now that thread_info is similar to task_struct, its address is in r2 so CURRENT_THREAD_INFO() macro is useless. This patch removes it. This patch also moves the 'tovirt(r2, r2)' down just before the reactivation of MMU translation, so that we keep the physical address of 'current' in r2 until then. It avoids a few calls to tophys(). At the same time, as the 'cpu' field is not anymore in thread_info, TI_CPU is renamed TASK_CPU by this patch. It also allows to get rid of a couple of '#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE' as ACCOUNT_CPU_USER_ENTRY() and ACCOUNT_CPU_USER_EXIT() are empty when CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not defined. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Fix a missed conversion of TI_CPU idle_6xx.S] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc: Enable kcovAndrew Donnellan
kcov provides kernel coverage data that's useful for fuzzing tools like syzkaller. Wire up kcov support on powerpc. Disable kcov instrumentation on the same files where we currently disable gcov and UBSan instrumentation, plus some additional exclusions which appear necessary to boot on book3e machines. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Daniel Axtens <dja@axtens.net> # e6500 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/8xx: don't disable large TLBs with CONFIG_STRICT_KERNEL_RWXChristophe Leroy
This patch implements handling of STRICT_KERNEL_RWX with large TLBs directly in the TLB miss handlers. To do so, etext and sinittext are aligned on 512kB boundaries and the miss handlers use 512kB pages instead of 8Mb pages for addresses close to the boundaries. It sets RO PP flags for addresses under sinittext. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWXChristophe Leroy
Today, STRICT_KERNEL_RWX is based on the use of regular pages to map kernel pages. On Book3s 32, it has three consequences: - Using pages instead of BAT for mapping kernel linear memory severely impacts performance. - Exec protection is not effective because no-execute cannot be set at page level (except on 603 which doesn't have hash tables) - Write protection is not effective because PP bits do not provide RO mode for kernel-only pages (except on 603 which handles it in software via PAGE_DIRTY) On the 603+, we have: - Independent IBAT and DBAT allowing limitation of exec parts. - NX bit can be set in segment registers to forbit execution on memory mapped by pages. - RO mode on DBATs even for kernel-only blocks. On the 601, there is nothing much we can do other than warn the user about it, because: - BATs are common to instructions and data. - BAT do not provide RO mode for kernel-only blocks. - segment registers don't have the NX bit. In order to use IBAT for exec protection, this patch: - Aligns _etext to BAT block sizes (128kb) - Set NX bit in kernel segment register (Except on vmalloc area when CONFIG_MODULES is selected) - Maps kernel text with IBATs. In order to use DBAT for exec protection, this patch: - Aligns RW DATA to BAT block sizes (4M) - Maps kernel RO area with write prohibited DBATs - Maps remaining memory with remaining DBATs Here is what we get with this patch on a 832x when activating STRICT_KERNEL_RWX: Symbols: c0000000 T _stext c0680000 R __start_rodata c0680000 R _etext c0800000 T __init_begin c0800000 T _sinittext ~# cat /sys/kernel/debug/block_address_translation ---[ Instruction Block Address Translation ]--- 0: 0xc0000000-0xc03fffff 0x00000000 Kernel EXEC coherent 1: 0xc0400000-0xc05fffff 0x00400000 Kernel EXEC coherent 2: 0xc0600000-0xc067ffff 0x00600000 Kernel EXEC coherent 3: - 4: - 5: - 6: - 7: - ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xc07fffff 0x00000000 Kernel RO coherent 1: 0xc0800000-0xc0ffffff 0x00800000 Kernel RW coherent 2: 0xc1000000-0xc1ffffff 0x01000000 Kernel RW coherent 3: 0xc2000000-0xc3ffffff 0x02000000 Kernel RW coherent 4: 0xc4000000-0xc7ffffff 0x04000000 Kernel RW coherent 5: 0xc8000000-0xcfffffff 0x08000000 Kernel RW coherent 6: 0xd0000000-0xdfffffff 0x10000000 Kernel RW coherent 7: - ~# cat /sys/kernel/debug/segment_registers ---[ User Segments ]--- 0x00000000-0x0fffffff Kern key 1 User key 1 VSID 0xa085d0 0x10000000-0x1fffffff Kern key 1 User key 1 VSID 0xa086e1 0x20000000-0x2fffffff Kern key 1 User key 1 VSID 0xa087f2 0x30000000-0x3fffffff Kern key 1 User key 1 VSID 0xa08903 0x40000000-0x4fffffff Kern key 1 User key 1 VSID 0xa08a14 0x50000000-0x5fffffff Kern key 1 User key 1 VSID 0xa08b25 0x60000000-0x6fffffff Kern key 1 User key 1 VSID 0xa08c36 0x70000000-0x7fffffff Kern key 1 User key 1 VSID 0xa08d47 0x80000000-0x8fffffff Kern key 1 User key 1 VSID 0xa08e58 0x90000000-0x9fffffff Kern key 1 User key 1 VSID 0xa08f69 0xa0000000-0xafffffff Kern key 1 User key 1 VSID 0xa0907a 0xb0000000-0xbfffffff Kern key 1 User key 1 VSID 0xa0918b ---[ Kernel Segments ]--- 0xc0000000-0xcfffffff Kern key 0 User key 1 No Exec VSID 0x000ccc 0xd0000000-0xdfffffff Kern key 0 User key 1 No Exec VSID 0x000ddd 0xe0000000-0xefffffff Kern key 0 User key 1 No Exec VSID 0x000eee 0xf0000000-0xffffffff Kern key 0 User key 1 No Exec VSID 0x000fff Aligning _etext to 128kb allows to map up to 32Mb text with 8 IBATs: 16Mb + 8Mb + 4Mb + 2Mb + 1Mb + 512kb + 256kb + 128kb (+ 128kb) = 32Mb (A 9th IBAT is unneeded as 32Mb would need only a single 32Mb block) Aligning data to 4M allows to map up to 512Mb data with 8 DBATs: 16Mb + 8Mb + 4Mb + 4Mb + 32Mb + 64Mb + 128Mb + 256Mb = 512Mb Because some processors only have 4 BATs and because some targets need DBATs for mapping other areas, the following patch will allow to modify _etext and data alignment. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/mm/32s: add setibat() clearibat() and update_bats()Christophe Leroy
setibat() and clearibat() allows to manipulate IBATs independently of DBATs. update_bats() allows to update bats after init. This is done with MMU off. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/mmu: add is_strict_kernel_rwx() helperChristophe Leroy
Add a helper to know whether STRICT_KERNEL_RWX is enabled. This is based on rodata_enabled flag which is defined only when CONFIG_STRICT_KERNEL_RWX is selected. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/mm/32s: use _PAGE_EXEC in setbat()Christophe Leroy
Do not set IBAT when setbat() is called without _PAGE_EXEC Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/32: always populate page tables for Abatron BDI.Christophe Leroy
When CONFIG_BDI_SWITCH is set, the page tables have to be populated allthough large TLBs are used, because the BDI switch knows nothing about those large TLBs which are handled directly in TLB miss logic. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/mm/32s: use generic mmu_mapin_ram() for all blocks.Christophe Leroy
Now that mmu_mapin_ram() is able to handle other blocks than the one starting at 0, the WII can use it for all its blocks. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/mm/32s: rework mmu_mapin_ram()Christophe Leroy
This patch reworks mmu_mapin_ram() to be more generic and map as much blocks as possible. It now supports blocks not starting at address 0. It scans DBATs array to find free ones instead of forcing the use of BAT2 and BAT3. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/mm/32: add base address to mmu_mapin_ram()Christophe Leroy
At the time being, mmu_mapin_ram() always maps RAM from the beginning. But some platforms like the WII have to map a second block of RAM. This patch adds to mmu_mapin_ram() the base address of the block. At the moment, only base address 0 is supported. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/8xx: Map 32Mb of RAM at init.Christophe Leroy
At the time being, initial MMU setup allows 24 Mbytes of DATA and 8 Mbytes of code. Some debug setup like CONFIG_KASAN generate huge kernels with text size over the 8M limit and data over the 24 Mbytes limit. Here is an 8xx kernel compiled with CONFIG_KASAN_INLINE for one of my boards: [root@po16846vm linux-powerpc]# size -x vmlinux text data bss dec hex filename 0x111019c 0x41b0d4 0x490de0 26984528 19bc050 vmlinux This patch maps up to 32 Mbytes code based on _einittext symbol and allows 32 Mbytes of memory instead of 24. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/8xx: replace most #ifdef by IS_ENABLED() in 8xx_mmu.cChristophe Leroy
This patch replaces most #ifdef mess by IS_ENABLED() in 8xx_mmu.c This has the advantage of allowing syntax verification at compile time regardless of selected options. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23Revert "powerpc/book3s32: Reorder _PAGE_XXX flags to simplify TLB handling"Michael Ellerman
This reverts commit 78ca1108b10927b3d068c8da91352b0f4cd01fc5. It is causing boot failures with qemu mac99 in at least some configurations.
2019-02-22powerpc: Move page table dump files in a dedicated subdirectoryChristophe Leroy
This patch moves the files related to page table dump in a dedicated subdirectory. The purpose is to clean a bit arch/powerpc/mm by regrouping multiple files handling a dedicated function. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Shorten the file names while we're at it] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-22powerpc: dump as a single line areas mapping a single physical page.Christophe Leroy
When using KASAN, there are parts of the shadow area where all pages are mapped to the kasan_early_shadow_page. It is pointless to dump one line for each of those pages (in the example below there are 7168 entries pointing to the same physical page). ~# cat /sys/kernel/debug/kernel_page_tables ... ---[ kasan shadow mem start ]--- 0xf7c00000-0xf8bfffff 0x06fac000 16M rw present dirty accessed 0xf8c00000-0xf8c03fff 0x00cd0000 16K r present dirty accessed 0xf8c04000-0xf8c07fff 0x00cd0000 16K r present dirty accessed 0xf8c08000-0xf8c0bfff 0x00cd0000 16K r present dirty accessed 0xf8c0c000-0xf8c0ffff 0x00cd0000 16K r present dirty accessed 0xf8c10000-0xf8c13fff 0x00cd0000 16K r present dirty accessed ... 7168 identical lines 0xffbfc000-0xffbfffff 0x00cd0000 16K r present dirty accessed ---[ kasan shadow mem end ]--- ... This patch modifies linux table dump to dump as a single line areas where all addresses points to the same physical page. That physical address is put inside [] to show that all virt pages points to the same phys page. ~# cat /sys/kernel/debug/kernel_page_tables ... ---[ kasan shadow mem start ]--- 0xf7c00000-0xf8bfffff 0x06fac000 16M rw present dirty accessed 0xf8c00000-0xffbfffff [0x00cd0000] 16K r present dirty accessed ---[ kasan shadow mem end ]--- ... Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-22powerpc/book3s32: Reorder _PAGE_XXX flags to simplify TLB handlingChristophe Leroy
For pages without _PAGE_USER, PP field is 00 For pages with _PAGE_USER, PP field is 10 for RW and 11 for RO. This patch sets _PAGE_USER to 0x002 and _PAGE_RW to 0x001 is order to simplify TLB handling by reducing amount of shifts. The location of _PAGE_PRESENT and _PAGE_HASHPTE doesn't matter as they are only SW related flags. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-22powerpc/hash32: use physical address directly in hash handlers.Christophe Leroy
Since commit c62ce9ef97ba ("powerpc: remove remaining bits from CONFIG_APUS"), tophys() has become a pure constant operation. PAGE_OFFSET is known at compile time so the physical address can be builtin directly. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-22powerpc/6xx: Store PGDIR physical address in a SPRGChristophe Leroy
Use SPRN_SPRG2 to store the current thread PGDIR and avoid reading thread_struct.pgdir at every TLB miss. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-22powerpc: simplify BDI switchChristophe Leroy
There is no reason to re-read each time the pointer at location 0xf0 as it is fixed and known. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-22powerpc/64s/hash: Fix assert_slb_presence() use of the slbfee. instructionNicholas Piggin
The slbfee. instruction must have bit 24 of RB clear, failure to do so can result in false negatives that result in incorrect assertions. This is not obvious from the ISA v3.0B document, which only says: The hardware ignores the contents of RB 36:38 40:63 -- p.1032 This patch fixes the bug and also clears all other bits from PPC bit 36-63, which is good practice when dealing with reserved or ignored bits. Fixes: e15a4fea4dee ("powerpc/64s/hash: Add some SLB debugging tests") Cc: stable@vger.kernel.org # v4.20+ Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-21Merge branch 'topic/dma' into nextMichael Ellerman
Merge hch's big DMA rework series. This is in a topic branch in case he wants to merge it to minimise conflicts.
2019-02-19Merge branch 'fixes' into nextMichael Ellerman
There's a few important fixes in our fixes branch, in particular the pgd/pud_present() one, so merge it now.
2019-02-18powerpc/dma: use the generic direct mapping bypassChristoph Hellwig
Now that we've switched all the powerpc nommu and swiotlb methods to use the generic dma_direct_* calls we can remove these ops vectors entirely and rely on the common direct mapping bypass that avoids indirect function calls entirely. This also allows to remove a whole lot of boilerplate code related to setting up these operations. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18powerpc/dma: use the dma_direct mapping routinesChristoph Hellwig
Switch the streaming DMA mapping and ownership transfer methods to the functionally identical dma_direct_ versions. Factor the cache maintainance helpers into the form expected by the common code for that. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18powerpc/dma: use the dma-direct allocator for coherent platformsChristoph Hellwig
The generic code allows a few nice things such as node local allocations and dipping into the CMA area. The lookup of the right zone for a given dma mask works a little different, but the results should be the same. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18powerpc/dma: remove dma_nommu_mmap_coherentChristoph Hellwig
The coherent cache version of this function already is functionally identicall to the default version, and by defining the arch_dma_coherent_to_pfn hook the same is ture for the noncoherent version as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2024-06-19 08:01:13 +0000