summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/8xx
AgeCommit message (Collapse)Author
2024-08-30Revert "powerpc/8xx: Always pin kernel text TLB"Christophe Leroy
This reverts commit bccc58986a2f98e3af349c85c5f49aac7fb19ef2. When STRICT_KERNEL_RWX is selected, EXEC memory must stop where RW memory start. When pinning iTLBs it means an 8M alignment for RW data start. That may be acceptable on boards with a lot of memory but one of my supported boards only has 32 Mbytes and this forced alignment leads to a waste of almost 4 Mbytes with is more than 10% of the total memory. So revert commit bccc58986a2f ("powerpc/8xx: Always pin kernel text TLB") but don't restore previous behaviour in ITLB miss handler as now kernel PGD entries are copied into each process PGDIR. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/01b6780b860c8043b51a1ba9d83acfc6f2dde910.1724173828.git.christophe.leroy@csgroup.eu
2023-10-19powerpc: Untangle fixmap.h and pgtable.h and mmu.hChristophe Leroy
fixmap.h need pgtable.h for [un]map_kernel_page() pgtable.h need fixmap.h for FIXADDR_TOP. Untangle the two files by moving FIXADDR_TOP into pgtable.h Also move VIRT_IMMR_BASE to fixmap.h to avoid fixmap.h in mmu.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/5eba12392a018be28ad0a02ed844767b132589e7.1695659959.git.christophe.leroy@csgroup.eu
2023-09-01Merge tag 'tty-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...
2023-08-31Merge tag 'powerpc-6.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the configured SMT state when hotplugging CPUs into the system - Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix MMU to avoid a broadcast TLBIE flush on exit - Drop the exclusion between ptrace/perf watchpoints, and drop the now unused associated arch hooks - Add support for the "nohlt" command line option to disable CPU idle - Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1 - Rework memory block size determination, and support 256MB size on systems with GPUs that have hotpluggable memory - Various other small features and fixes Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai. * tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits) macintosh/ams: linux/platform_device.h is needed powerpc/xmon: Reapply "Relax frame size for clang" powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled powerpc/iommu: Fix notifiers being shared by PCI and VIO buses powerpc/mpc5xxx: Add missing fwnode_handle_put() powerpc/config: Disable SLAB_DEBUG_ON in skiroot powerpc/pseries: Remove unused hcall tracing instruction powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n powerpc: dts: add missing space before { powerpc/eeh: Use pci_dev_id() to simplify the code powerpc/64s: Move CPU -mtune options into Kconfig powerpc/powermac: Fix unused function warning powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT powerpc: Don't include lppaca.h in paca.h powerpc/pseries: Move hcall_vphn() prototype into vphn.h powerpc/pseries: Move VPHN constants into vphn.h cxl: Drop unused detach_spa() powerpc: Drop zalloc_maybe_bootmem() powerpc/powernv: Use struct opal_prd_msg in more places ...
2023-08-18powerpc/8xx: Remove init_internal_rtc() to fix no previous prototype errorChristophe Leroy
A W=1 build of mpc885_ads_defconfig throws the following error: CC arch/powerpc/platforms/8xx/m8xx_setup.o arch/powerpc/platforms/8xx/m8xx_setup.c:41:1: error: no previous prototype for 'init_internal_rtc' [-Werror=missing-prototypes] 41 | init_internal_rtc(void) | ^~~~~~~~~~~~~~~~~ init_internal_rtc() was introduced by commit df34403dcaac ("[POWERPC] 8xx: Add mpc885ads support and common mpc8xx files") as a weak function but has never been defined and/or used outside m8xx_setup.c As it is called only once there, just fold it into its caller and remove it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/0aa1141e18a84d926e199093204b37ec993f0c87.1692275185.git.christophe.leroy@csgroup.eu
2023-08-16powerpc/8xx: Remove immr_map() and immr_unmap()Christophe Leroy
Since commit fb533d0c5a97 ("[POWERPC] 8xx: Infrastructure code cleanup.") immr_map() is just returning mpc8xxx_immr pointer and immr_unmap() do nothing. We already have parts of code that use mpc8xxx_immr directly so get rid of immr_map() and immr_unmap() by using mpc8xxx_immr directly. And avoid going through local pointers that hide the pointed structure. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/633ed46f6015ff44d5599258647ea517f75d6a1d.1691474658.git.christophe.leroy@csgroup.eu
2023-08-16powerpc/include: Declare mpc8xx_immr in 8xx_immap.hChristophe Leroy
Do the same as for cmp2_immr : declare it at the same place as its type immap_t, that is in 8xx_immap.h instead of fs_pd.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/62d490b65899c2f2667ca7045c5f0fad9cbda458.1691474658.git.christophe.leroy@csgroup.eu
2023-08-16powerpc/include: Remove unneeded #include <asm/fs_pd.h>Christophe Leroy
tqm8xx_setup.c and fs_enet.h don't use any items provided by fs_pd.h Remove unneeded #include <asm/fs_pd.h> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/b056c4e986a4a7707fc1994304c34f7bd15d6871.1691474658.git.christophe.leroy@csgroup.eu
2023-08-08net: fs_enet: Don't include fs_enet_pd.h when not neededChristophe Leroy
Three platforms in arch/powerpc/platforms/8xx/ include fs_enet_pd.h but don't use anything from it. Remove the includes. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/de62ad1261a801c4a8ae4238bd4842ff278d2ddf.1691155347.git.christophe.leroy@csgroup.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-04serial: cpm_uart: Don't include fs_uart_pd.h when not neededChristophe Leroy
Remove inclusion of fs_uart_pd.h from all files not using anything from that file. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/c7996ef4de56e7ee42a434e37d214cba337a146c.1691068700.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-28Merge tag 'powerpc-6.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add support for building the kernel using PC-relative addressing on Power10. - Allow HV KVM guests on Power10 to use prefixed instructions. - Unify support for the P2020 CPU (85xx) into a single machine description. - Always build the 64-bit kernel with 128-bit long double. - Drop support for several obsolete 2000's era development boards as identified by Paul Gortmaker. - A series fixing VFIO on Power since some generic changes. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu, Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and Timothy Pearson. * tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits) powerpc/64s: Disable pcrel code model on Clang powerpc: Fix merge conflict between pcrel and copy_thread changes powerpc/configs/powernv: Add IGB=y powerpc/configs/64s: Drop JFS Filesystem powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest powerpc/configs: Make pseries_le an alias for ppc64le_guest powerpc/configs: Incorporate generic kvm_guest.config into guest configs powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs powerpc/configs/64s: Enable Device Mapper options powerpc/configs/64s: Enable PSTORE powerpc/configs/64s: Enable VLAN support powerpc/configs/64s: Enable BLK_DEV_NVME powerpc/configs/64s: Drop REISERFS powerpc/configs/64s: Use SHA512 for module signatures powerpc/configs/64s: Enable IO_STRICT_DEVMEM powerpc/configs/64s: Enable SCHEDSTATS powerpc/configs/64s: Enable DEBUG_VM & other options powerpc/configs/64s: Enable EMULATED_STATS powerpc/configs/64s: Enable KUNIT and most tests ...
2023-04-27Merge tag 'sound-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "At this time, it's an interesting mixture of changes for both old and new stuff. Majority of changes are about ASoC (lots of systematic changes for converting remove callbacks to void, and cleanups), while we got the fixes and the enhancements of very old PCI cards, too. Here are some highlights: ALSA/ASoC Core: - Continued effort of more ASoC core cleanups - Minor improvements for XRUN handling in indirect PCM helpers - Code refactoring of PCM core code ASoC: - Continued feature and simplification work on SOF, including addition of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4 protocol - Hibernation support for CS35L45 - More DT binding conversions - Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363, nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car Gen4, Rockchip RK3588 and TI TAS5733 ALSA: - Lots of works for legacy emu10k1 and ymfpci PCI drivers - PCM kselftest fixes and enhancements" * tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits) ALSA: emu10k1: use high-level I/O in set_filterQ() ALSA: emu10k1: use high-level I/O functions also during init ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put() ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx() ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards ALSA: emu10k1: fixup DSP defines ALSA: emu10k1: pull in some register definitions from kX-project ALSA: emu10k1: remove some bogus defines ALSA: emu10k1: eliminate some unused defines ALSA: emu10k1: fix lineup of EMU_HANA_* defines ALSA: emu10k1: comment updates ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init() ALSA: emu10k1: minor optimizations ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init() ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads ALSA: emu10k1: remove apparently pointless FPGA reads ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init() ...
2023-03-16powerpc: Make generic_calibrate_decr() the defaultChristophe Leroy
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never checked so it must be non null on all platforms. Most platforms define generic_calibrate_decr() as their ppc_md.calibrate_decr(). Have time_init() call generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL, and remove default assignment from all machines. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-15powerpc/platforms: Use 'compatible' property for simple casesChristophe Leroy
Use the new 'compatible' property for simple cases. checkpatch complains about the new compatible being undocumented but in reality nothing is new so just ignore it for the time being. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-06gpiolib: split of_mm_gpio_chip out of linux/of_gpio.hArnd Bergmann
This is a rarely used feature that has nothing to do with the client-side of_gpio.h. Split it out with a separate header file and Kconfig option so it can be removed on its own timeline aside from removing the of_gpio consumer interfaces. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-05powerpc/8xx: Use a larger CPM1 command check maskHerve Codina
The CPM1 command mask is defined for use with the standard CPM1 command register as described in the user's manual: 0 |1 3|4 7|8 11|12 14| 15| RST| - |OPCODE|CH_NUM| - |FLG| In the QMC extension the CPM1 command register is redefined (QMC supplement user's manuel) with the following mapping: 0 |1 3|4 7|8 13|14| 15| RST|QMC OPCODE| 1110|CHANNEL_NUMBER| -|FLG| Extend the check command mask in order to support both the standard CH_NUM field and the QMC extension CHANNEL_NUMBER field. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230217145645.1768659-5-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-05powerpc/8xx: Add missing of_node_put() in tqm8xx_setup.cLiang He
In init_ioports(), of_find_node_by_name() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220618024930.4056825-1-windhl@126.com
2022-05-11powerpc/8xx: Use kmalloced data structure instead of global staticChristophe Leroy
Use a kmalloced data structure to store interrupt controller internal data instead of static global variables. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c8f0866ee013113d5e28948943cf0586e49f5353.1649226186.git.christophe.leroy@csgroup.eu
2022-05-11powerpc/8xx: Remove mpc8xx_pics_init()Christophe Leroy
mpc8xx_pics_init() is now only a trampoline to mpc8xx_pic_init(). Remove mpc8xx_pics_init() and use mpc8xx_pic_init() directly. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9c55a698adb5ba3b7b77023170fcaf0acb5d2d81.1649226186.git.christophe.leroy@csgroup.eu
2022-05-11powerpc/8xx: Convert CPM1 interrupt controller to platform_deviceChristophe Leroy
In the same logic as commit be7ecbd240b2 ("soc: fsl: qe: convert QE interrupt controller to platform_device"), convert CPM1 interrupt controller to platform_device. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/fb80d0b2077312079c49da0296e25591578771cd.1649226186.git.christophe.leroy@csgroup.eu
2022-05-11powerpc/8xx: Convert CPM1 error interrupt handler to platform driverChristophe Leroy
Add CPM error interrupt as a standalone platform driver, to simplify the init of CPM interrupt handler. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/375a72df6e4a26c5959cc81a6c6d46152efa2306.1649226186.git.christophe.leroy@csgroup.eu
2022-05-11powerpc/8xx: Move CPM interrupt controller into a dedicated fileChristophe Leroy
CPM interrupt controller is quite standalone. Move it into a dedicated file. It will help for next step which will change it to a platform driver. This is pure code move, checkpatch report is ignored at this point, except one parenthesis alignment which would remain at the end of the series. All other points fly away with following patches. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d3a7dc832d905bed14b35d83410cdb69a7ba20e8.1649226186.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Add missing headersChristophe Leroy
Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h, asm/pci.h etc... Include the needed headers, and remove asm/prom.h when it was needed exclusively for pulling necessary headers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Remove asm/prom.h from all files that don't need itChristophe Leroy
Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
2022-05-02powerpc/8xx: export 'cpm_setbrg' for modulesRandy Dunlap
Fix missing export for a loadable module build: ERROR: modpost: "cpm_setbrg" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined! Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> [chleroy: Changed Fixes: tag] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210122010819.30986-1-rdunlap@infradead.org
2022-03-09powerpc: 8xx: fix a return value error in mpc8xx_pic_initHangyu Hua
mpc8xx_pic_init() should return -ENOMEM instead of 0 when irq_domain_add_linear() return NULL. This cause mpc8xx_pics_init to continue executing even if mpc8xx_pic_host is NULL. Fixes: cc76404feaed ("powerpc/8xx: Fix possible device node reference leak") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220223070223.26845-1-hbh25y@gmail.com
2021-02-09powerpc: bad_page_fault get registers from regsNicholas Piggin
Similar to the previous patch this makes interrupt handler function types more regular so they can be wrapped with the next patch. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210130130852.2952424-12-npiggin@gmail.com
2020-12-09powerpc/8xx: Always pin kernel text TLBChristophe Leroy
There is no big poing in not pinning kernel text anymore, as now we can keep pinned TLB even with things like DEBUG_PAGEALLOC. Remove CONFIG_PIN_TLB_TEXT, making it always right. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop ifdef around mmu_pin_tlb() to fix build errors] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/203b89de491e1379f1677a2685211b7c32adfff0.1606231483.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/8xx: Fix early debug when SMC1 is relocatedChristophe Leroy
When SMC1 is relocated and early debug is selected, the board hangs is ppc_md.setup_arch(). This is because ones the microcode has been loaded and SMC1 relocated, early debug writes in the weed. To allow smooth continuation, the SMC1 parameter RAM set up by the bootloader have to be copied into the new location. Fixes: 43db76f41824 ("powerpc/8xx: Add microcode patch to move SMC parameter RAM.") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b2f71f39eca543f1e4ec06596f09a8b12235c701.1607076683.git.christophe.leroy@csgroup.eu
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-26powerpc/8xx: Allow large TLBs with DEBUG_PAGEALLOCChristophe Leroy
DEBUG_PAGEALLOC only manages RW data. Text and RO data can still be mapped with hugepages and pinned TLB. In order to map with hugepages, also enforce a 512kB data alignment minimum. That's a trade-off between size of speed, taking into account that DEBUG_PAGEALLOC is a debug option. Anyway the alignment is still tunable. We also allow tuning of alignment for book3s to limit the complexity of the test in Kconfig that will anyway disappear in the following patches once DEBUG_PAGEALLOC is handled together with BATs. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c13256f2d356a316715da61fe089b3623ef217a5.1589866984.git.christophe.leroy@csgroup.eu
2020-05-26powerpc/8xx: Allow STRICT_KERNEL_RwX with pinned TLBChristophe Leroy
Pinned TLB are 8M. Now that there is no strict boundary anymore between text and RO data, it is possible to use 8M pinned executable TLB that covers both text and RO data. When PIN_TLB_DATA or PIN_TLB_TEXT is selected, enforce 8M RW data alignment and allow STRICT_KERNEL_RWX. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c535fc97bf0dd8693192e25feeed8088701e00c6.1589866984.git.christophe.leroy@csgroup.eu
2020-05-26powerpc/8xx: Don't set IMMR map anymore at bootChristophe Leroy
Only early debug requires IMMR to be mapped early. No need to set it up and pin it in assembly. Map it through page tables at udbg init when necessary. If CONFIG_PIN_TLB_IMMR is selected, pin it once we don't need the 32 Mb pinned RAM anymore. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/13c1e8539fdf363d3146f4884e5c3c76c6c308b5.1589866984.git.christophe.leroy@csgroup.eu
2020-05-26powerpc/8xx: Move PPC_PIN_TLB options into 8xx KconfigChristophe Leroy
PPC_PIN_TLB options are dedicated to the 8xx, move them into the 8xx Kconfig. While we are at it, add some text to explain what it does. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1ece39fac6312e1d14e6a67b3f9d9f9f91990a7b.1589866984.git.christophe.leroy@csgroup.eu
2020-05-26powerpc/8xx: Drop CONFIG_8xx_COPYBACK optionChristophe Leroy
CONFIG_8xx_COPYBACK was there to help disabling copyback cache mode for debuging hardware. But nobody will design new boards with 8xx now. All 8xx platforms select it, so make it the default and remove the option. Also remove the Mx_RESETVAL values which are pretty useless and hide the real value while reading code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bcc968cda075516eb76e2f25e09821f582c566b4.1589866984.git.christophe.leroy@csgroup.eu
2020-03-25powerpc: Replace setup_irq() by request_irq()afzal mohammed
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200312064256.18735-1-afzal.mohd.ma@gmail.com
2019-11-19powerpc/8xx: use the fixmapped IMMR in cpm_reset()Christophe Leroy
Since commit f86ef74ed919 ("powerpc/8xx: Fix vaddr for IMMR early remap"), the IMMR area has been mapped at startup with fixmap. Use that fixmap directly instead of calling ioremap(), this avoids calling ioremap() early before the slab is available. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f816ccdbd15b97cf43c5a8c7cc8dfa8db58ff036.1568294935.git.christophe.leroy@c-s.fr
2019-11-19powerpc/8xx: add __init to cpm1 init functionsChristophe Leroy
Functions cpm1_clk_setup(), cpm1_set_pin(), cpm_pic_init() and mpc8xx_pic_init() are only called from __init functions, so mark them __init as well. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c27168ef054f3a52edcf0ff91652700d53b3e32d.1568294563.git.christophe.leroy@c-s.fr
2019-07-13Merge tag 'powerpc-5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...
2019-07-05powerpc/8xx: Add microcode patch to move SMC parameter RAM.Christophe Leroy
Some SCC functions like the QMC requires an extended parameter RAM. On modern 8xx (ie 866 and 885), SPI area can already be relocated, allowing the use of those functions on SCC2. But SCC3 and SCC4 parameter RAM collide with SMC1 and SMC2 parameter RAMs. This patch adds microcode to allow the relocation of both SMC1 and SMC2, and relocate them at offsets 0x1ec0 and 0x1fc0. Those offsets are by default for the CPM1 DSP1 and DSP2, but there is no kernel driver using them at the moment so this area can be reused. This microcode is provided by Freescale/NXP in Engineering Bulletin EB662 ("MPC8xx I2C/SPI and SMC Relocation Microcode Packages") dated 2006. The binary code is public. The source is not available. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/8xx: Use IO accessors in microcode programming.Christophe Leroy
Change microcode functions to use IO accessors and get rid of volatile attributes. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.cChristophe Leroy
Reduce #ifdef mess by using IS_ENABLED() instead. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/8xx: refactor programming of microcode CPM params.Christophe Leroy
The CPM registers RCCR and CPMCR1..4 registers has to be set in accordance with the microcode patch beeing programmed. Lets define them as part of the patch set and refactor their programming from that definition. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/8xx: refactor printing of microcode patch name.Christophe Leroy
Define patch name together with the patch code, and refactor the associated printk() while replacing it by a pr_info() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/8xx: Refactor microcode writeChristophe Leroy
Add empty microcode tables so that all tables are defined all the time. Regroup the writing of the 3 tables regardless of the selected microcode. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/8xx: refactor writing of CPM microcode arraysChristophe Leroy
Create a function to refactor the writing of CPM microcode arrays. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/8xx: compact microcode arraysChristophe Leroy
Compact obscure microcode arrays by putting 4 values per line in order to reduce number of lines in the file to increase readability. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/8xx: drop verify_patch()Christophe Leroy
verify_patch() has been opted out since many years, and the comment suggests it doesn't work. So drop it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05powerpc/8xx: move CPM1 related files from sysdev/ to platforms/8xxChristophe Leroy
Only 8xx selects CPM1 and related CONFIG options are already in platforms/8xx/Kconfig Move the related C files to platforms/8xx/. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Minor formatting fixes] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-03-19 08:21:36 +0000