summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/powermac
AgeCommit message (Collapse)Author
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-01-21powerpc: Fix old-style function definitionMathieu Malaterre
Fix warnings such as: arch/powerpc/platforms/powermac/backlight.c: In function ‘pmac_backlight_get_legacy_brightness’: arch/powerpc/platforms/powermac/backlight.c:189:5: error: old-style function definition [-Werror=old-style-definition] int pmac_backlight_get_legacy_brightness() ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16powerpc: make use of for_each_node_by_type() instead of open-coding itDmitry Torokhov
Instead of manually coding the loop with of_find_node_by_type(), let's switch to the standard macro for iterating over nodes with given type. Also fixed a couple of refcount leaks in the aforementioned loops. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-11powerpc/PCI: Deprecate pci_get_bus_and_slot()Sinan Kaya
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot(). Use pci_get_domain_bus_and_slot() with a domain number of 0 as the code is not ready to consume multiple domains and existing code used domain number 0. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-04powerpc: Use of for_each_node_by_name() instead of open-coding itDmitry Torokhov
Instead of manually coding the loop with of_find_node_by_name(), let's switch to the standard macro for iterating over nodes with given name. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [mpe: Fix build failures due to typo in mpc832x_mds.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-04powerpc/powermac: drop useless call to of_find_node_by_nameDmitry Torokhov
We are not using result, so this simply results in a leaked refcount. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-04powerpc/powermac: fix OF node refcount leakDmitry Torokhov
We need to call of_node_put() for device nodes obtained with of_find_node_by_name(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-16Merge tag 'powerpc-4.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "A bit of a small release, I suspect in part due to me travelling for KS. But my backlog of patches to review is smaller than usual, so I think in part folks just didn't send as much this cycle. Non-highlights: - Five fixes for the >128T address space handling, both to fix bugs in our implementation and to bring the semantics exactly into line with x86. Highlights: - Support for a new OPAL call on bare metal machines which gives us a true NMI (ie. is not masked by MSR[EE]=0) for debugging etc. - Support for Power9 DD2 in the CXL driver. - Improvements to machine check handling so that uncorrectable errors can be reported into the generic memory_failure() machinery. - Some fixes and improvements for VPHN, which is used under PowerVM to notify the Linux partition of topology changes. - Plumbing to enable TM (transactional memory) without suspend on some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND). - Support for emulating vector loads form cache-inhibited memory, on some Power9 revisions. - Disable the fast-endian switch "syscall" by default (behind a CONFIG), we believe it has never had any users. - A major rework of the API drivers use when initiating and waiting for long running operations performed by OPAL firmware, and changes to the powernv_flash driver to use the new API. - Several fixes for the handling of FP/VMX/VSX while processes are using transactional memory. - Optimisations of TLB range flushes when using the radix MMU on Power9. - Improvements to the VAS facility used to access coprocessors on Power9, and related improvements to the way the NX crypto driver handles requests. - Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit. Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard, Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley, Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu, Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee, Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A. Kennington III" * tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits) powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature powerpc/64s: Fix masking of SRR1 bits on instruction fault powerpc/64s: mm_context.addr_limit is only used on hash powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary powerpc/64s/hash: Fix fork() with 512TB process address space powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Fix 512T hint detection to use >= 128T powerpc: Fix DABR match on hash based systems powerpc/signal: Properly handle return value from uprobe_deny_signal() powerpc/fadump: use kstrtoint to handle sysfs store powerpc/lib: Implement UACCESS_FLUSHCACHE API powerpc/lib: Implement PMEM API powerpc/powernv/npu: Don't explicitly flush nmmu tlb powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm() powerpc/powernv/idle: Round up latency and residency values powerpc/kprobes: refactor kprobe_lookup_name for safer string operations powerpc/kprobes: Blacklist emulate_update_regs() from kprobes powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace powerpc/kprobes: Disable preemption before invoking probe handler for optprobes ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04powerpc/powermac: Use setup_timer() helperAllen Pais
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-23powerpc: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Anatolij Gustschin <agust@denx.de> Cc: Scott Wood <oss@buserror.net> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28powerpc: Add struct smp_ops_t.cause_nmi_ipi operationNicholas Piggin
Have the NMI IPI code use this op when the platform defines it. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-13powerpc: Change the doorbell IPI calling conventionNicholas Piggin
Change the doorbell callers to know about their msgsnd addressing, rather than have them set a per-cpu target data tag at boot that gets sent to the cause_ipi functions. The data is only used for doorbell IPI functions, no other IPI types, so it makes sense to keep that detail local to doorbell. Have the platform code understand doorbell IPIs, rather than the interrupt controller code understand them. Platform code can look at capabilities it has available and decide which to use. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/hotplug.h> We are going to split <linux/sched/hotplug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/hotplug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-14i2c_powermac: shut up lockdep warningDenis Kirjanov
That's unclear why lockdep shows the following warning but adding a lockdep class to struct pmac_i2c_bus solves it [ 20.507795] ====================================================== [ 20.507796] [ INFO: possible circular locking dependency detected ] [ 20.507800] 4.8.0-rc7-00037-gd2ffb01 #21 Not tainted [ 20.507801] ------------------------------------------------------- [ 20.507803] swapper/0/1 is trying to acquire lock: [ 20.507818] (&bus->mutex){+.+.+.}, at: [<c000000000052830>] .pmac_i2c_open+0x30/0x100 [ 20.507819] [ 20.507819] but task is already holding lock: [ 20.507829] (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0 [ 20.507830] [ 20.507830] which lock already depends on the new lock. [ 20.507830] [ 20.507832] [ 20.507832] the existing dependency chain (in reverse order) is: [ 20.507837] [ 20.507837] -> #4 (&policy->rwsem){+.+.+.}: [ 20.507844] [<c00000000082385c>] .down_write+0x6c/0x110 [ 20.507849] [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0 [ 20.507855] [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110 [ 20.507860] [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250 [ 20.507866] [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28 [ 20.507872] [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0 [ 20.507878] [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c [ 20.507883] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.507887] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.507894] [ 20.507894] -> #3 (subsys mutex#2){+.+.+.}: [ 20.507899] [<c000000000820448>] .mutex_lock_nested+0xa8/0x590 [ 20.507903] [<c0000000004d7f24>] .bus_probe_device+0x44/0xe0 [ 20.507907] [<c0000000004d5208>] .device_add+0x508/0x730 [ 20.507911] [<c0000000004dd528>] .register_cpu+0x118/0x190 [ 20.507916] [<c000000000b14450>] .topology_init+0x148/0x248 [ 20.507921] [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0 [ 20.507925] [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c [ 20.507929] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.507934] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.507939] [ 20.507939] -> #2 (cpu_add_remove_lock){+.+.+.}: [ 20.507944] [<c000000000820448>] .mutex_lock_nested+0xa8/0x590 [ 20.507950] [<c000000000087a9c>] .register_cpu_notifier+0x2c/0x70 [ 20.507955] [<c000000000b267e0>] .spawn_ksoftirqd+0x18/0x4c [ 20.507959] [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0 [ 20.507964] [<c000000000b0f770>] .kernel_init_freeable+0xb0/0x28c [ 20.507968] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.507972] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.507978] [ 20.507978] -> #1 (&host->mutex){+.+.+.}: [ 20.507982] [<c000000000820448>] .mutex_lock_nested+0xa8/0x590 [ 20.507987] [<c0000000000527e8>] .kw_i2c_open+0x18/0x30 [ 20.507991] [<c000000000052894>] .pmac_i2c_open+0x94/0x100 [ 20.507995] [<c000000000b220a0>] .smp_core99_probe+0x260/0x410 [ 20.507999] [<c000000000b185bc>] .smp_prepare_cpus+0x280/0x2ac [ 20.508003] [<c000000000b0f748>] .kernel_init_freeable+0x88/0x28c [ 20.508008] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.508012] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.508018] [ 20.508018] -> #0 (&bus->mutex){+.+.+.}: [ 20.508023] [<c0000000000ed5b4>] .lock_acquire+0x84/0x100 [ 20.508027] [<c000000000820448>] .mutex_lock_nested+0xa8/0x590 [ 20.508032] [<c000000000052830>] .pmac_i2c_open+0x30/0x100 [ 20.508037] [<c000000000052e14>] .pmac_i2c_do_begin+0x34/0x120 [ 20.508040] [<c000000000056bc0>] .pmf_call_one+0x50/0xd0 [ 20.508045] [<c00000000068ff1c>] .g5_pfunc_switch_volt+0x2c/0xc0 [ 20.508050] [<c00000000068fecc>] .g5_pfunc_switch_freq+0x1cc/0x1f0 [ 20.508054] [<c00000000068fc2c>] .g5_cpufreq_target+0x2c/0x40 [ 20.508058] [<c0000000006873ec>] .__cpufreq_driver_target+0x23c/0x840 [ 20.508062] [<c00000000068c798>] .cpufreq_gov_performance_limits+0x18/0x30 [ 20.508067] [<c00000000068915c>] .cpufreq_start_governor+0xac/0x100 [ 20.508071] [<c00000000068a788>] .cpufreq_set_policy+0x208/0x260 [ 20.508076] [<c00000000068abdc>] .cpufreq_init_policy+0x6c/0xb0 [ 20.508081] [<c00000000068ae70>] .cpufreq_online+0x250/0x9d0 [ 20.508085] [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110 [ 20.508090] [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250 [ 20.508094] [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28 [ 20.508099] [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0 [ 20.508103] [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c [ 20.508107] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.508112] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.508113] [ 20.508113] other info that might help us debug this: [ 20.508113] [ 20.508121] Chain exists of: [ 20.508121] &bus->mutex --> subsys mutex#2 --> &policy->rwsem [ 20.508121] [ 20.508123] Possible unsafe locking scenario: [ 20.508123] [ 20.508124] CPU0 CPU1 [ 20.508125] ---- ---- [ 20.508128] lock(&policy->rwsem); [ 20.508132] lock(subsys mutex#2); [ 20.508135] lock(&policy->rwsem); [ 20.508138] lock(&bus->mutex); [ 20.508139] [ 20.508139] *** DEADLOCK *** [ 20.508139] [ 20.508141] 3 locks held by swapper/0/1: [ 20.508150] #0: (cpu_hotplug.lock){++++++}, at: [<c000000000087838>] .get_online_cpus+0x48/0xc0 [ 20.508159] #1: (subsys mutex#2){+.+.+.}, at: [<c0000000004d7670>] .subsys_interface_register+0x50/0x110 [ 20.508168] #2: (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0 [ 20.508169] [ 20.508169] stack backtrace: [ 20.508173] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc7-00037-gd2ffb01 #21 [ 20.508175] Call Trace: [ 20.508180] [c0000000790c2b90] [c00000000082cc70] .dump_stack+0xe0/0x14c (unreliable) [ 20.508184] [c0000000790c2c20] [c000000000828c88] .print_circular_bug+0x350/0x388 [ 20.508188] [c0000000790c2cd0] [c0000000000ecb0c] .__lock_acquire+0x196c/0x1d30 [ 20.508192] [c0000000790c2e50] [c0000000000ed5b4] .lock_acquire+0x84/0x100 [ 20.508196] [c0000000790c2f20] [c000000000820448] .mutex_lock_nested+0xa8/0x590 [ 20.508201] [c0000000790c3030] [c000000000052830] .pmac_i2c_open+0x30/0x100 [ 20.508206] [c0000000790c30c0] [c000000000052e14] .pmac_i2c_do_begin+0x34/0x120 [ 20.508209] [c0000000790c3150] [c000000000056bc0] .pmf_call_one+0x50/0xd0 [ 20.508213] [c0000000790c31e0] [c00000000068ff1c] .g5_pfunc_switch_volt+0x2c/0xc0 [ 20.508217] [c0000000790c3250] [c00000000068fecc] .g5_pfunc_switch_freq+0x1cc/0x1f0 [ 20.508221] [c0000000790c3320] [c00000000068fc2c] .g5_cpufreq_target+0x2c/0x40 [ 20.508226] [c0000000790c3390] [c0000000006873ec] .__cpufreq_driver_target+0x23c/0x840 [ 20.508230] [c0000000790c3440] [c00000000068c798] .cpufreq_gov_performance_limits+0x18/0x30 [ 20.508235] [c0000000790c34b0] [c00000000068915c] .cpufreq_start_governor+0xac/0x100 [ 20.508239] [c0000000790c3530] [c00000000068a788] .cpufreq_set_policy+0x208/0x260 [ 20.508244] [c0000000790c35d0] [c00000000068abdc] .cpufreq_init_policy+0x6c/0xb0 [ 20.508249] [c0000000790c3940] [c00000000068ae70] .cpufreq_online+0x250/0x9d0 [ 20.508253] [c0000000790c3a30] [c0000000004d76d8] .subsys_interface_register+0xb8/0x110 [ 20.508258] [c0000000790c3ad0] [c000000000689bb0] .cpufreq_register_driver+0x1d0/0x250 [ 20.508262] [c0000000790c3b60] [c000000000b4f8f4] .g5_cpufreq_init+0x9cc/0xa28 [ 20.508267] [c0000000790c3c20] [c00000000000a98c] .do_one_initcall+0x5c/0x1d0 [ 20.508271] [c0000000790c3d00] [c000000000b0f86c] .kernel_init_freeable+0x1ac/0x28c [ 20.508276] [c0000000790c3db0] [c00000000000b3bc] .kernel_init+0x1c/0x140 [ 20.508280] [c0000000790c3e30] [c0000000000098f4] .ret_from_kernel_thread+0x58/0x64 Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-07Merge tag 'powerpc-4.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Major rework of Book3S 64-bit exception vectors (Nicholas Piggin) - Use gas sections for arranging exception vectors et. al. - Large set of TM cleanups and selftests (Cyril Bur) - Enable transactional memory (TM) lazily for userspace (Cyril Bur) - Support for XZ compression in the zImage wrapper (Oliver O'Halloran) - Add support for bpf constant blinding (Naveen N. Rao) - Beginnings of upstream support for PA Semi Nemo motherboards (Darren Stevens) Fixes: - Ensure .mem(init|exit).text are within _stext/_etext (Michael Ellerman) - xmon: Don't use ld on 32-bit (Michael Ellerman) - vdso64: Use double word compare on pointers (Anton Blanchard) - powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui) - powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy) - powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K (Aneesh Kumar K.V) - Fix memory leak in queue_hotplug_event() error path (Andrew Donnellan) - Replay hypervisor maintenance interrupt first (Nicholas Piggin) Various performance optimisations (Anton Blanchard): - Align hot loops of memset() and backwards_memcpy() - During context switch, check before setting mm_cpumask - Remove static branch prediction in atomic{, 64}_add_unless - Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little endian - Set default CPU type to POWER8 for little endian builds Cleanups & features: - Sparse fixes/cleanups (Daniel Axtens) - Preserve CFAR value on SLB miss caused by access to bogus address (Paul Mackerras) - Radix MMU fixups for POWER9 (Aneesh Kumar K.V) - Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU) (Simon Guo) - Optimise syscall entry for virtual, relocatable case (Nicholas Piggin) - Optimise MSR handling in exception handling (Nicholas Piggin) - Support for kexec with Radix MMU (Benjamin Herrenschmidt) - powernv EEH fixes (Russell Currey) - Suprise PCI hotplug support for powernv (Gavin Shan) - Endian/sparse fixes for powernv PCI (Gavin Shan) - Defconfig updates (Anton Blanchard) - KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh) - cxl: Flush PSL cache before resetting the adapter (Frederic Barrat) - cxl: replace loop with for_each_child_of_node(), remove unneeded of_node_put() (Andrew Donnellan) - Fix HV facility unavailable to use correct handler (Nicholas Piggin) - Remove unnecessary syscall trampoline (Nicholas Piggin) - fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael Ellerman) - Quieten EEH message when no adapters are found (Anton Blanchard) - powernv: Add PHB register dump debugfs handle (Russell Currey) - Use kprobe blacklist for exception handlers & asm functions (Nicholas Piggin) - Document the syscall ABI (Nicholas Piggin) - MAINTAINERS: Update cxl maintainers (Michael Neuling) - powerpc: Remove all usages of NO_IRQ (Michael Ellerman) Minor cleanups: - Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur, Frederic Barrat, Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng, Simon Guo" * tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits) powerpc/bpf: Add support for bpf constant blinding powerpc/bpf: Implement support for tail calls powerpc/bpf: Introduce accessors for using the tmp local stack space powerpc/fadump: Fix build break when CONFIG_PROC_VMCORE=n powerpc: tm: Enable transactional memory (TM) lazily for userspace powerpc/tm: Add TM Unavailable Exception powerpc: Remove do_load_up_transact_{fpu,altivec} powerpc: tm: Rename transct_(*) to ck(\1)_state powerpc: tm: Always use fp_state and vr_state to store live registers selftests/powerpc: Add checks for transactional VSXs in signal contexts selftests/powerpc: Add checks for transactional VMXs in signal contexts selftests/powerpc: Add checks for transactional FPUs in signal contexts selftests/powerpc: Add checks for transactional GPRs in signal contexts selftests/powerpc: Check that signals always get delivered selftests/powerpc: Add TM tcheck helpers in C selftests/powerpc: Allow tests to extend their kill timeout selftests/powerpc: Introduce GPR asm helper header file selftests/powerpc: Move VMX stack frame macros to header file selftests/powerpc: Rework FPU stack placement macros and move to header file selftests/powerpc: Check for VSX preservation across userspace preemption ...
2016-09-20powerpc: Remove all usages of NO_IRQMichael Ellerman
NO_IRQ has been == 0 on powerpc for just over ten years (since commit 0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change platforms to use it")). It's also 0 on most other arches. Although it's fairly harmless, every now and then it causes confusion when a driver is built on powerpc and another arch which doesn't define NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least some of which are to work around that problem. So we'd like to remove it. This is fairly trivial in the arch code, we just convert: if (irq == NO_IRQ) to if (!irq) if (irq != NO_IRQ) to if (irq) irq = NO_IRQ; to irq = 0; return NO_IRQ; to return 0; And a few other odd cases as well. At least for now we keep the #define NO_IRQ, because there is driver code that uses NO_IRQ and the fixes to remove those will go via other trees. Note we also change some occurrences in PPC sound drivers, drivers/ps3, and drivers/macintosh. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13powerpc/sparse: Make a bunch of things staticDaniel Axtens
Squash a bunch of sparse warnings by making things static. Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-06powerpc/powermac: Convert to hotplug state machineSebastian Andrzej Siewior
Install the callbacks via the state machine. I assume here that the powermac has two CPUs and so only one can go up or down at a time. The variable smp_core99_host_open is here to ensure that we do not try to open or close the i2c host twice if something goes wrong and we invoke the prepare or online callback twice due to rollback. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: rt@linutronix.de Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160818125731.27256-16-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-02treewide: replace obsolete _refok by __refFabian Frederick
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-21powerpc: Get rid of ppc_md.init_early()Benjamin Herrenschmidt
It is now called right after platform probe, so the probe function can just do the job. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Move 32-bit probe() machine to later in the boot processBenjamin Herrenschmidt
This converts all the 32-bit platforms to use the expanded device-tree which is a pretty mechanical change. Unlike 64-bit, the 32-bit kernel didn't rely on platform initializations to setup the MMU since it sets it up entirely before probe_machine() so the move has comparatively less consequences though it's a bigger patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/64: Move 64-bit probe_machine() to later in the boot processBenjamin Herrenschmidt
We no long need the machine type that early, so we can move probe_machine() to after the device-tree has been expanded. This will allow further consolidation. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/pmac: Remove spurrious machine type testBenjamin Herrenschmidt
pmac_declare_of_platform_devices() is already a machine initcall, thus it won't be called on a non-powermac machine. Testing for chrp there is pointless. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/64: Move MMU backend selection out of platform codeBenjamin Herrenschmidt
We move it into early_mmu_init() based on firmware features. For PS3, we have to move the setting of these into early_init_devtree(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/pmac: Remove early allocation of the SMU command bufferBenjamin Herrenschmidt
The SMU command buffer needs to be allocated below 2G using memblock. In the past, this had to be done very early from the arch code as memblock wasn't available past that point. That is no longer the case though, smu_init() is called from setup_arch() when memblock is still functional these days. So move the allocation to the SMU driver itself. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc/dart: Use a cachable DARTBenjamin Herrenschmidt
Instead of punching a hole in the linear mapping, just use normal cachable memory, and apply the flush sequence documented in the CPC625 (aka U3) user manual. This allows us to remove quite a bit of code related to the early allocation of the DART and the hole in the linear mapping. We can also get rid of the copy of the DART for suspend/resume as the original memory can just be saved/restored now, as long as we properly sync the caches. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Integrate dart_init() fix to return ENODEV when DART disabled] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14powerpc: Make ppc_md.{halt, restart} __noreturnDaniel Axtens
powernv marks it's halt and restart calls as __noreturn. However, ppc_md does not have this annotation. Add the annotation to ppc_md, and then to every halt/restart function that is missing it. Additionally, I have verified that all of these functions do not return. Occasionally I have added a spin loop to be sure. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14powerpc/pmac/smp: Add missing FROZEN hotplug notifier transitionsAnna-Maria Gleixner
The FROZEN transitions are used when a CPU suspends/resumes. In case of a suspend/resume, only the up prepare (CPU_UP_PREPARE_FROZEN) is handled. The error handling transition CPU_UP_CANCELED_FROZEN as well as the CPU_ONLINE_FROZEN transition are not handled. Masking the switch case action argument with ~CPU_TASKS_FROZEN, to handle all FROZEN tasks the same way than the corresponding non frozen tasks. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-21powerpc/pci: Delay populating pdnGavin Shan
The pdn (struct pci_dn) instances are allocated from memblock or bootmem when creating PCI controller (hoses) in setup_arch(). PCI hotplug, which will be supported by proceeding patches, releases PCI device nodes and their corresponding pdn on unplugging event. The memory chunks for pdn instances allocated from memblock or bootmem are hard to reused after being released. This delays creating pdn by pci_devs_phb_init() from setup_arch() to core_initcall() so that they are allocated from slab. The memory consumed by pdn can be released to system without problem during PCI unplugging time. It indicates that pci_dn is unavailable in setup_arch() and the the fixup on pdn (like AGP's) can't be carried out that time. We have to do that in pcibios_root_bridge_prepare() on maple/pasemi/powermac platforms where/when the pdn is available. pcibios_root_bridge_prepare is called from subsys_initcall() which is executed after core_initcall() so the code flow does not change. At the mean while, the EEH device is created when pdn is populated, meaning pdn and EEH device have same life cycle. In turn, we needn't call eeh_dev_init() to create EEH device explicitly. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-14powerpc: Various typo fixesMichael Ellerman
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-11Merge branch 'topic/mprofile-kernel' into nextMichael Ellerman
Merge the ftrace changes to support -mprofile-kernel on ppc64le. This is a prerequisite for live patching, the support for which will be merged via the livepatch tree based on this topic branch.
2016-03-07powerpc/ftrace: Use $(CC_FLAGS_FTRACE) when disabling ftraceTorsten Duwe
Rather than open-coding -pg whereever we want to disable ftrace, use the existing $(CC_FLAGS_FTRACE) variable. This has the advantage that it will work in future when we use a different set of flags to enable ftrace. Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-01powerpc: Fix misspellings in comments.Adam Buchbinder
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-17powerpc: Add missing calls to va_end()Daniel Axtens
cppcheck picked up that there were a couple of missing va_end() calls in functions using va_start(). Signed-off-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-26powerpc/powermac: set IRQF_NO_THREAD for xmon/cascade handlersJohn Ogness
The xmon and cascade irq handlers must not run as threads. pmac_pic_lock is already a raw_spinlock, but the irq flag IRQF_NO_THREAD needs to be set as well. Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-29powerpc: Kconfig: remove BE-only platforms from LE kernel buildBoqun Feng
Currently, little endian is only supported on powernv and pseries, however, Kconfigs still allow us to include other platforms in a LE kernel, this may result in space wasting or even build error if some BE-only platforms always assume they are built for a BE kernel. So just modify the Kconfigs of BE-only platforms to remove them from being built for a LE kernel. For 32bit only platforms, nothing needs to be done, because CPU_LITTLE_ENDIAN depends on PPC64. For 64bit supported platforms, add CPU_BIG_ENDIAN to dependencies explicitly, so that these platforms will be disabled for LE [Suggested-by: Cédric Le Goater <clg@fr.ibm.com>]. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-07-30genirq/irqdomain: Allow irq domain aliasingMarc Zyngier
It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-15powerpc/powermac: Fix build error seen with powermac smp buildsGuenter Roeck
powermac smp builds fail with arch/powerpc/platforms/powermac/smp.c: In function 'smp_psurge_probe': arch/powerpc/platforms/powermac/smp.c:278:3: error: 'return' with a value, in function returning void There are several instances of this error. Fixes: a7f4ee1fe93a ("powerpc: Drop return value of smp_ops->probe()") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-11powerpc/powermac: Move controller ops from ppc_md to controller_opsDaniel Axtens
This moves the Power Mac platform to use the pci_controller_ops structure rather than ppc_md for PCI controller operations. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-11powerpc: dart_iommu: optionally populate controller_ops on initDaniel Axtens
If a pci_controller_ops struct is provided to iommu_init_early_dart, populate that with the DMA setup ops, rather than ppc_md. If NULL is provided, populate ppc_md as before. This also patches the call sites for Maple and Power Mac to pass NULL, so existing behaviour is preserved. The benefit of making this optional is that it means we don't have to change dart, Maple and Power Mac over to the controller_ops system in one fell swoop. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-11powerpc: pcibios_enable_device_hook: return bool rather than intDaniel Axtens
pcibios_enable_device_hook returned an int. Every implementation returned either -EINVAL or 0. The return value wasn't propagated by the caller: any non-zero return value caused pcibios_enable_device to return -EINVAL itself. Therefore, make the hook return a bool. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-11powerpc/powermac: move pmac_pci_probe_mode from setup.c to pci.cDaniel Axtens
Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-10powerpc: Drop return value of smp_ops->probe()Michael Ellerman
smp_ops->probe() is currently supposed to return the number of cpus in the system. The last actual usage of the value was removed in May 2007 in e147ec8f1808 "[POWERPC] Simplify smp_space_timers". We still passed the value around until June 2010 when even that was finally removed in c1aa687d499a "powerpc: Clean up obsolete code relating to decrementer and timebase". So drop that requirement, probe() now returns void, and update all implementations. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-25powerpc/pmac: Fix DT refcount imbalance in pmac_pic_probe_oldstyleGeert Uytterhoeven
Internally, of_find_node_by_name() calls of_node_put() on its "from" parameter, which must not be done on "master", as it's still in use, and will be released manually later. This may cause a zero kref refcount. Call of_node_get() before to compensate for this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-17powerpc/powermac: Cleaning up missing null-terminate in conjunction with strncpyRickard Strandqvist
Replacing strncpy with strlcpy to avoid strings that lacks null terminate. And removed unnecessary magic numbers. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-01-30powerpc/powermac: Convert PCI to use generic config accessorsRob Herring
Convert the powermac PCI driver to use the generic config access functions. This changes accesses from (in|out)_(8|le16|le32) to readX/writeX variants. I believe these should be equivalent for PCI config space accesses, but confirmation would be nice. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: linuxppc-dev@lists.ozlabs.org
2014-11-19powerpc: Remove more traces of bootmemMichael Ellerman
Although we are now selecting NO_BOOTMEM, we still have some traces of bootmem lying around. That is because even with NO_BOOTMEM there is still a shim that converts bootmem calls into memblock calls, but ultimately we want to remove all traces of bootmem. Most of the patch is conversions from alloc_bootmem() to memblock_virt_alloc(). In general a call such as: p = (struct foo *)alloc_bootmem(x); Becomes: p = memblock_virt_alloc(x, 0); We don't need the cast because memblock_virt_alloc() returns a void *. The alignment value of zero tells memblock to use the default alignment, which is SMP_CACHE_BYTES, the same value alloc_bootmem() uses. We remove a number of NULL checks on the result of memblock_virt_alloc(). That is because memblock_virt_alloc() will panic if it can't allocate, in exactly the same way as alloc_bootmem(), so the NULL checks are and always have been redundant. The memory returned by memblock_virt_alloc() is already zeroed, so we remove several memsets of the result of memblock_virt_alloc(). Finally we convert a few uses of __alloc_bootmem(x, y, MAX_DMA_ADDRESS) to just plain memblock_virt_alloc(). We don't use memblock_alloc_base() because MAX_DMA_ADDRESS is ~0ul on powerpc, so limiting the allocation to that is pointless, 16XB ought to be enough for anyone. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove superfluous bootmem includesAnton Blanchard
Lots of places included bootmem.h even when not using bootmem. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2024-06-06 16:51:42 +0000