| Age | Commit message (Collapse) | Author |
|---|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel from powersave_nap_ctl_table and nmi_wd_lpm_factor_ctl_table.
This removal is safe because register_sysctl implicitly uses ARRAY_SIZE()
in addition to checking for the sentinel.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
In the plpar_hcall trace code, currently we use r0
to store the value of r4. But this value is not
used subsequently in the code. Hence remove this unused
save to r0 in plpar_hcall and plpar_hcall9
Suggested-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230929172337.7906-2-atrajeev@linux.vnet.ibm.com
|
|
In powerpc pseries system, below behaviour is observed while
enabling tracing on hcall:
# cd /sys/kernel/debug/tracing/
# cat events/powerpc/hcall_exit/enable
0
# echo 1 > events/powerpc/hcall_exit/enable
# ls
-bash: fork: Bad address
Above is from power9 lpar with latest kernel. Past this, softlockup
is observed. Initially while attempting via perf_event_open to
use "PERF_TYPE_TRACEPOINT", kernel panic was observed.
perf config used:
================
memset(&pe[1],0,sizeof(struct perf_event_attr));
pe[1].type=PERF_TYPE_TRACEPOINT;
pe[1].size=96;
pe[1].config=0x26ULL; /* 38 raw_syscalls/sys_exit */
pe[1].sample_type=0; /* 0 */
pe[1].read_format=PERF_FORMAT_TOTAL_TIME_ENABLED|PERF_FORMAT_TOTAL_TIME_RUNNING|PERF_FORMAT_ID|PERF_FORMAT_GROUP|0x10ULL; /* 1f */
pe[1].inherit=1;
pe[1].precise_ip=0; /* arbitrary skid */
pe[1].wakeup_events=0;
pe[1].bp_type=HW_BREAKPOINT_EMPTY;
pe[1].config1=0x1ULL;
Kernel panic logs:
==================
Kernel attempted to read user page (8) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000008
Faulting instruction address: 0xc0000000004c2814
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: nfnetlink bonding tls rfkill sunrpc dm_service_time dm_multipath pseries_rng xts vmx_crypto xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ibmvfc scsi_transport_fc ibmveth dm_mirror dm_region_hash dm_log dm_mod fuse
CPU: 0 PID: 1431 Comm: login Not tainted 6.4.0+ #1
Hardware name: IBM,8375-42A POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.30 (VL950_892) hv:phyp pSeries
NIP page_remove_rmap+0x44/0x320
LR wp_page_copy+0x384/0xec0
Call Trace:
0xc00000001416e400 (unreliable)
wp_page_copy+0x384/0xec0
__handle_mm_fault+0x9d4/0xfb0
handle_mm_fault+0xf0/0x350
___do_page_fault+0x48c/0xc90
hash__do_page_fault+0x30/0x70
do_hash_fault+0x1a4/0x330
data_access_common_virt+0x198/0x1f0
--- interrupt: 300 at 0x7fffae971abc
git bisect tracked this down to below commit:
'commit baa49d81a94b ("powerpc/pseries: hvcall stack frame overhead")'
This commit changed STACK_FRAME_OVERHEAD (112 ) to
STACK_FRAME_MIN_SIZE (32 ) since 32 bytes is the minimum size
for ELFv2 stack. With the latest kernel, when running on ELFv2,
STACK_FRAME_MIN_SIZE is used to allocate stack size.
During plpar_hcall_trace, first call is made to HCALL_INST_PRECALL
which saves the registers and allocates new stack frame. In the
plpar_hcall_trace code, STK_PARAM is accessed at two places.
1. To save r4: std r4,STK_PARAM(R4)(r1)
2. To access r4 back: ld r12,STK_PARAM(R4)(r1)
HCALL_INST_PRECALL precall allocates a new stack frame. So all
the stack parameter access after the precall, needs to be accessed
with +STACK_FRAME_MIN_SIZE. So the store instruction should be:
std r4,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1)
If the "std" is not updated with STACK_FRAME_MIN_SIZE, we will
end up with overwriting stack contents and cause corruption.
But instead of updating 'std', we can instead remove it since
HCALL_INST_PRECALL already saves it to the correct location.
similarly load instruction should be:
ld r12,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1)
Fix the load instruction to correctly access the stack parameter
with +STACK_FRAME_MIN_SIZE and remove the store of r4 since the
precall saves it correctly.
Cc: stable@vger.kernel.org # v6.2+
Fixes: baa49d81a94b ("powerpc/pseries: hvcall stack frame overhead")
Co-developed-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230929172337.7906-1-atrajeev@linux.vnet.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
|
|
When JUMP_LABEL=n, the tracepoint refcount test in the pre-call stores
the refcount value to the stack, so the same value can be used for the
post-call (presumably to avoid racing with the value concurrently
changing).
On little-endian (ELFv2) that might have just worked by luck, because
32(r1) is STK_PARAM(R3) there and so the value save gets clobbered by
the tracing code when it's non-zero, but fortunately r3 is the hcall
number and 0 is an invalid hcall number so it should get clobbered by
another non-zero value. In any case, commit cc1adb5f32557
("powerpc/pseries: Use jump labels for hcall tracepoints") removed the
code that actually used the value stored, so now it's just dead code.
It's fragile to be storing to the stack like this, and confusing. Better
remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230509091600.70994-2-npiggin@gmail.com
|
|
With JUMP_LABEL=n, hcall_tracepoint_refcount's address is being tested
instead of its value. This results in the tracing slowpath always being
taken unnecessarily.
Fixes: 9a10ccb29c0a2 ("powerpc/pseries: move hcall_tracepoint_refcount out of .toc")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230509091600.70994-1-npiggin@gmail.com
|
|
lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:
BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693
caller is lparcfg_data+0x408/0x19a0
CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
Call Trace:
dump_stack_lvl+0x154/0x200 (unreliable)
check_preemption_disabled+0x214/0x220
lparcfg_data+0x408/0x19a0
...
This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.
Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.
Fixes: f13c13a00512 ("powerpc: Stop using non-architected shared_proc field in lppaca")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au
|
|
These don't have any particularly good reason to belong in lppaca.h,
move them into their own header.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-1-mpe@ellerman.id.au
|
|
Radix vmemmap mapping can map things correctly at the PMD level or PTE
level based on different device boundary checks. Hence we skip the
restrictions w.r.t vmemmap size to be multiple of PMD_SIZE. This also
makes the feature widely useful because to use PMD_SIZE vmemmap area we
require a memory block size of 2GiB
We can also use MHP_RESERVE_PAGES_MEMMAP_ON_MEMORY to that the feature can
work with a memory block size of 256MB. Using altmap.reserve feature to
align things correctly at pageblock granularity. We can end up losing
some pages in memory with this. For ex: with a 256MiB memory block size,
we require 4 pages to map vmemmap pages, In order to align things
correctly we end up adding a reserve of 28 pages. ie, for every 4096
pages 28 pages get reserved.
Link: https://lkml.kernel.org/r/20230808091501.287660-6-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid redefining the same value in multiple source.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817162411.429-1-msuchanek@suse.de
|
|
Parse the device tree in early init to find the memory block size to be
used by the kernel. Consolidate the memory block size device tree parsing
to one helper and use that on both powernv and pseries. We still want to
use machine-specific callback because on all machine types other than
powernv and pseries we continue to return MIN_MEMORY_BLOCK_SIZE.
pseries_memory_block_size used to look for the second memory
block (memory@x) to determine the memory_block_size value. This patch
changed that to look at all memory blocks and make sure we can map them all
correctly using the computed memory block size value.
Add workaround to force 256MB memory block size if device driver managed
memory such as GPU memory is present. This helps to add GPU memory
that is not aligned to 1G.
Co-developed-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801044447.11275-1-aneesh.kumar@linux.ibm.com
|
|
If device_register() returns error in ibmebus_bus_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com
|
|
Don't use kernel-doc "/**" comment format for non-kernel-doc comments.
This prevents a kernel-doc warning:
arch/powerpc/platforms/pseries/plpks.c:186: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Label is combination of label attributes + name.
Fixes: 2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202308040430.GxmPAnwZ-lkp@intel.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810000740.23756-1-rdunlap@infradead.org
|
|
Merge SMT changes we are sharing with the tip tree.
|
|
Integrate with the generic SMT support, so that when a CPU is DLPAR
onlined it is brought up with the correct SMT mode.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230705145143.40545-11-ldufour@linux.ibm.com
|
|
As part of the generic HOTPLUG_SMT code, there is support for disabling
secondary SMT threads at boot time, by passing "nosmt" on the kernel
command line.
The way that is implemented is the secondary threads are brought partly
online, and then taken back offline again. That is done to support x86
CPUs needing certain initialisation done on all threads. However powerpc
has similar needs, see commit d70a54e2d085 ("powerpc/powernv: Ignore
smt-enabled on Power8 and later").
For that to work the powerpc CPU hotplug callbacks need to be registered
before secondary CPUs are brought online, otherwise __cpu_disable()
fails due to smp_ops->cpu_disable being NULL.
So split the basic initialisation into pseries_cpu_hotplug_init() which
can be called early from setup_arch(). The DLPAR related initialisation
can still be done later, because it needs to do allocations.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230705145143.40545-9-ldufour@linux.ibm.com
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Fixup maple/setup.c which needs platform_device]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230724210247.778034-1-robh@kernel.org
|
|
Commit 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR
core removal") unmaps the window paste address and issues HCALL to
close window in the hypervisor for migration or DLPAR core removal
events. So holds mmap_mutex and then mmap lock before unmap the
paste address. But if the user space issue mmap paste address at
the same time with the migration event, coproc_mmap() is called
after holding the mmap lock which can trigger deadlock when trying
to acquire mmap_mutex in coproc_mmap().
t1: mmap() call to mmap t2: Migration event
window paste address
do_mmap2() migration_store()
ksys_mmap_pgoff() pseries_migrate_partition()
vm_mmap_pgoff() vas_migration_handler()
Acquire mmap lock reconfig_close_windows()
do_mmap() lock mmap_mutex
mmap_region() Acquire mmap lock
call_mmap() //Wait for mmap lock
coproc_mmap() unmap vma
lock mmap_mutex update window status
//wait for mmap_mutex Release mmap lock
mmap vma unlock mmap_mutex
update window status
unlock mmap_mutex
...
Release mmap lock
Fix this deadlock issue by holding mmap lock first before mmap_mutex
in reconfig_close_windows().
Fixes: 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR core removal")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230716100506.7833-1-haren@linux.ibm.com
|
|
watchdog_hardlockup_set_timeout_pct()
The powerpc/platforms/pseries/mobility.c calls
watchdog_hardlockup_set_timeout_pct(), which is declared in
<asm/nmi.h>. We used to automatically get <asm/nmi.h> included, but
that changed as of commit 7ca8fe94aa92 ("watchdog/hardlockup: define
HARDLOCKUP_DETECTOR_ARCH"). Let's add the explicit include.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/r/af19b76d-aa4b-6c88-9cac-eae4b2072497@infradead.org
Fixes: 7ca8fe94aa92 ("watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
use the -mprofile-kernel option (kernel specific ftrace ABI) for big
endian ELFv2 kernels
- Add initial Dynamic Execution Control Register (DEXCR) support, and
allow the ROP protection instructions to be used on Power 10
- Various other small features and fixes
Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.
* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
powerpc: remove checks for binutils older than 2.25
powerpc: Fail build if using recordmcount with binutils v2.37
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
powerpc/iommu: Only build sPAPR access functions on pSeries
powerpc: powernv: Annotate data races in opal events
powerpc: Mark writes registering ipi to host cpu through kvm and polling
powerpc: Annotate accesses to ipi message flags
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
powerpc: qspinlock: Mark accesses to qnode lock checks
powerpc/powernv/pci: Remove last IODA1 defines
powerpc/powernv/pci: Remove MVE code
powerpc/powernv/pci: Remove ioda1 support
powerpc: 52xx: Make immr_id DT match tables static
powerpc: mpc512x: Remove open coded "ranges" parsing
powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
powerpc: fsl: Use of_property_read_reg() to parse "reg"
powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
macintosh: Use of_property_read_reg() to parse "reg"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull ordered workqueue creation updates from Tejun Heo:
"For historical reasons, unbound workqueues with max concurrency limit
of 1 are considered ordered, even though the concurrency limit hasn't
been system-wide for a long time.
This creates ambiguity around whether ordered execution is actually
required for correctness, which was actually confusing for e.g. btrfs
(btrfs updates are being routed through the btrfs tree).
There aren't that many users in the tree which use the combination and
there are pending improvements to unbound workqueue affinity handling
which will make inadvertent use of ordered workqueue a bigger loss.
This clarifies the situation for most of them by updating the ones
which require ordered execution to use alloc_ordered_workqueue().
There are some conversions being routed through subsystem-specific
trees and likely a few stragglers. Once they're all converted,
workqueue can trigger a warning on unbound + @max_active==1 usages and
eventually drop the implicit ordered behavior"
* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
scsi: NCR5380: Use default @max_active for hostdata->work_q
media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: mwifiex: Use default @max_active for workqueues
wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
greybus: Use alloc_ordered_workqueue() to create ordered workqueues
powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
|
|
When memory is dynamically added/removed, iommu_mem_notifier() is invoked. This
routine traverses through all the DMA windows (DDW only, not default windows)
to add/remove "direct" TCE mappings. The routines for this purpose are
tce_clearrange_multi_pSeriesLP() and tce_clearrange_multi_pSeriesLP().
Both these routines are designed for Direct mapped DMA windows only.
The issue is that there could be some DMA windows in the list which are not
"direct" mapped. Calling these routines will either,
1) remove some dynamically mapped TCEs, Or
2) try to add TCEs which are out of bounds and HCALL returns H_PARAMETER
Here are the side affects when these routines are incorrectly invoked for
"dynamically" mapped DMA windows.
tce_setrange_multi_pSeriesLP()
This adds direct mapped TCEs. Now, this could invoke HCALL to add TCEs with
out-of-bound range. In this scenario, HCALL will return H_PARAMETER and DLAR
ADD of memory will fail.
tce_clearrange_multi_pSeriesLP()
This will remove range of TCEs. The TCE range that is calculated, depending on
the memory range being added, could infact be mapping some other memory
address (for dynamic DMA window scenario). This will wipe out those TCEs.
The solution is for iommu_mem_notifier() to only invoke these routines for
"direct" mapped DMA windows.
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
[mpe: Initialise direct at allocation time in ddw_list_new_entry()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230613171641.15641-1-gbatra@linux.vnet.ibm.com
|
|
The refcount on mm is dropped before the coprocessor is detached.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 7bc6f71bdff5f ("powerpc/vas: Define and use common vas_window struct")
Fixes: b22f2d88e435c ("powerpc/pseries/vas: Integrate API with open/close windows")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230607101024.14559-1-npiggin@gmail.com
|
|
Do a search and replace of:
- NMI_WATCHDOG_ENABLED => WATCHDOG_HARDLOCKUP_ENABLED
- SOFT_WATCHDOG_ENABLED => WATCHDOG_SOFTOCKUP_ENABLED
- watchdog_nmi_ => watchdog_hardlockup_
- nmi_watchdog_available => watchdog_hardlockup_available
- nmi_watchdog_user_enabled => watchdog_hardlockup_user_enabled
- soft_watchdog_user_enabled => watchdog_softlockup_user_enabled
- NMI_WATCHDOG_DEFAULT => WATCHDOG_HARDLOCKUP_DEFAULT
Then update a few comments near where names were changed.
This is specifically to make it less confusing when we want to introduce
the buddy hardlockup detector, which isn't using NMIs. As part of this,
we sanitized a few names for consistency.
[trix@redhat.com: make variables static]
Link: https://lkml.kernel.org/r/20230525162822.1.I0fb41d138d158c9230573eaa37dc56afa2fb14ee@changeid
Link: https://lkml.kernel.org/r/20230519101840.v5.12.I91f7277bab4bf8c0cb238732ed92e7ce7bbd71a6@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently in tce_freemulti_pSeriesLP() there is no limit on how many
TCEs are passed to the H_STUFF_TCE hcall. This has not caused an issue
until now, but newer firmware releases have started enforcing a limit of
512 TCEs per call.
The limit is correct per the specification (PAPR v2.12 § 14.5.4.2.3).
The code has been in it's current form since it was initially merged.
Cc: stable@vger.kernel.org
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
[mpe: Tweak change log wording & add PAPR reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230525143454.56878-1-gbatra@linux.vnet.ibm.com
|
|
For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).
1. When adding DDW
This issue is exposed with "slub_debug". Error thrown out from
dma_iommu_dma_supported()
Warning: IOMMU offset too big for device mask
mask: 0xffffffff, table offset: 0x800000000000000
2. During Dynamic removal of the PCI device.
Error is from iommu_tce_table_put() since a NULL table pointer is
passed in.
Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com
|
|
Now that power calls iommu_device_register() and populates its groups
using iommu_ops->device_group it should not be calling
iommu_group_remove_device().
The core code owns the groups and all the other related iommu data, it
will clean it up automatically.
Remove the bus notifiers and explicit calls to
iommu_group_remove_device().
Fixes: a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0-v1-1421774b874b+167-ppc_device_group_jgg@nvidia.com
|
|
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c74 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for building the kernel using PC-relative addressing on
Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine
description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.
* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
powerpc/64s: Disable pcrel code model on Clang
powerpc: Fix merge conflict between pcrel and copy_thread changes
powerpc/configs/powernv: Add IGB=y
powerpc/configs/64s: Drop JFS Filesystem
powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
powerpc/configs: Make pseries_le an alias for ppc64le_guest
powerpc/configs: Incorporate generic kvm_guest.config into guest configs
powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
powerpc/configs/64s: Enable Device Mapper options
powerpc/configs/64s: Enable PSTORE
powerpc/configs/64s: Enable VLAN support
powerpc/configs/64s: Enable BLK_DEV_NVME
powerpc/configs/64s: Drop REISERFS
powerpc/configs/64s: Use SHA512 for module signatures
powerpc/configs/64s: Enable IO_STRICT_DEVMEM
powerpc/configs/64s: Enable SCHEDSTATS
powerpc/configs/64s: Enable DEBUG_VM & other options
powerpc/configs/64s: Enable EMULATED_STATS
powerpc/configs/64s: Enable KUNIT and most tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators
PCIe native device hotplug:
- Fix AB-BA deadlock between reset_lock and device_lock
Power management:
- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices
- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset
Error handling:
- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native
ASPM:
- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0
Freescale i.MX6 PCIe controller driver:
- Install imprecise external abort handler only when DT indicates
PCIe support
Freescale Layerscape PCIe controller driver:
- Add ls1028a endpoint mode support
Qualcomm PCIe controller driver:
- Add SM8550 DT binding and driver support
- Add SDX55 DT binding and driver support
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0
- Add DT "mhi" register region for supported SoCs
- Expose link transition counts via debugfs to help debug low power
issues
- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices
- Enable async probe by default to reduce boot time
Miscellaneous:
- Sort controller Kconfig entries by vendor"
* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...
|
|
Add a firmware feature flag, FW_FEATURE_PLPKS, to indicate availability of
Platform KeyStore related hcalls.
Check this flag in plpks_is_available() and pseries_plpks_init() before
trying to make an hcall.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230224041012.772648-1-ajd@linux.ibm.com
|
|
This macro is to be used in assembly where C functions are called.
pcrel addressing mode requires branches to functions with a
localentry value of 1 to have either a trailing nop or @notoc.
This macro permits the latter without changing callers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add dummy definitions to fix selftests build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-5-npiggin@gmail.com
|
|
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails. Copied from "x86/mm: try
VMA lock-based page fault handling first"
[ldufour@linux.ibm.com: powerpc/mm: fix mmap_lock bad unlock]
Link: https://lkml.kernel.org/r/20230306154244.17560-1-ldufour@linux.ibm.com
Link: https://lore.kernel.org/linux-mm/842502FB-F99C-417C-9648-A37D0ECDC9CE@linux.ibm.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-32-surenb@google.com
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of open-coding it everywhere introduce a tiny helper that can be
used to iterate over each resource of a PCI device, and convert the most
obvious users into it.
While at it drop doubled empty line before pdev_sort_resources().
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230330162434.35055-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
|
|
Replace open coded reading of "reg" or of_get_address()/
of_translate_address() calls with a single call to
of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230329220337.141295-1-robh@kernel.org
|
|
Platform device helper routines won't update the NUMA distance table
while creating a platform device, even if the device is present on a
NUMA node that doesn't have memory or CPU. This is especially true for
pmem devices. If the target node of the pmem device is not online, we
find the nearest online node to the device and associate the pmem device
with that online node. To find the nearest online node, we should have
the numa distance table updated correctly. Update the distance
information during the device probe.
For a papr scm device on NUMA node 3 distance_lookup_table value for
distance_ref_points_depth = 2 before and after fix is below:
Before fix:
node 3 distance depth 0 - 0
node 3 distance depth 1 - 0
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
After fix
node 3 distance depth 0 - 3
node 3 distance depth 1 - 1
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
Without the fix, the nearest numa node to the pmem device (NUMA node 3)
will be picked as 4. After the fix, we get the correct numa node which
is 5.
Fixes: da1115fdbd6e ("powerpc/nvdimm: Pick nearby online node if the device node is not online")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230404041433.1781804-1-aneesh.kumar@linux.ibm.com
|
|
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144659.1541127-1-robh@kernel.org
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Drop change in ppc4xx_probe_pci_bridge(), formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144657.1541039-1-robh@kernel.org
|
|
This is follow up change after 14b5d59a261b ("powerpc/pseries: Fix
formatting to make code look more beautiful") to conform to kernel
coding style.
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230324220041.11378-1-arkamar@atlas.cz
|
|
The hypervisor supports user-mode NX from Power10.
pseries_vas_dlpar_cpu() is called from lparcfg_write() to update VAS
windows for DLPAR event in shared processor mode and the kernel gets
-ENOTSUPP for HCALLs if the user-mode NX is not supported. The current
VAS implementation also supports only with Radix page tables. Whereas in
dedicated processor mode, pseries_vas_notifier() is registered only if
the copy/paste feature is enabled. So instead of displaying HCALL error
messages, update VAS capabilities if the copy/paste feature is
available.
This patch ignores updating VAS capabilities in pseries_vas_dlpar_cpu()
and returns success if the copy/paste feature is not enabled. Then
lparcfg_write() completes the processor DLPAR operations without any
failures.
Fixes: 2147783d6bf0 ("powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1d0e727e7dbd9a28627ef08ca9df9c86a50175e2.camel@linux.ibm.com
|
|
struct class should never be modified in a sysfs callback as there is
nothing in the structure to modify, and frankly, the structure is almost
never used in a sysfs callback, so mark it as constant to allow struct
class to be moved to read-only memory.
While we are touching all class sysfs callbacks also mark the attribute
as constant as it can not be modified. The bonding code still uses this
structure so it can not be removed from the function callbacks.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steve French <sfrench@samba.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-cifs@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230325084537.3622280-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct bus_type should never be modified in a sysfs callback as there is
nothing in the structure to modify, and frankly, the structure is almost
never used in a sysfs callback, so mark it as constant to allow struct
bus_type to be moved to read-only memory.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hu Haowen <src.res@email.cn>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # rbd
Acked-by: Ira Weiny <ira.weiny@intel.com> # cxl
Reviewed-by: Alex Shi <alexs@kernel.org>
Acked-by: Iwona Winiarska <iwona.winiarska@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi
Link: https://lore.kernel.org/r/20230313182918.1312597-23-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310232850.3960676-3-mcgrof@kernel.org
|
|
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230313182918.1312597-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never
checked so it must be non null on all platforms.
Most platforms define generic_calibrate_decr() as their
ppc_md.calibrate_decr(). Have time_init() call
generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL,
and remove default assignment from all machines.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
|
|
Up until now PPC64 managed to avoid using iommu_ops. The VFIO driver
uses a SPAPR TCE sub-driver and all iommu_ops uses were kept in the
Type1 VFIO driver. Recent development added 2 uses of iommu_ops to the
generic VFIO which broke POWER:
- a coherency capability check;
- blocking IOMMU domain - iommu_group_dma_owner_claimed()/...
This adds a simple iommu_ops which reports support for cache coherency
and provides a basic support for blocking domains. No other domain types
are implemented so the default domain is NULL.
Since now iommu_ops controls the group ownership, this takes it out of
VFIO.
This adds an IOMMU device into a pci_controller (=PHB) and registers it
in the IOMMU subsystem, iommu_ops is registered at this point. This
setup is done in postcore_initcall_sync.
This replaces iommu_group_add_device() with iommu_probe_device() as the
former misses necessary steps in connecting PCI devices to IOMMU
devices. This adds a comment about why explicit iommu_probe_device() is
still needed.
The previous discussion is here:
https://lore.kernel.org/r/20220707135552.3688927-1-aik@ozlabs.ru/
https://lore.kernel.org/r/20220701061751.1955857-1-aik@ozlabs.ru/
Fixes: e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence")
Fixes: 70693f470848 ("vfio: Set DMA ownership for VFIO devices")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[mpe: Fix CONFIG_IOMMU_API=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2000135730.16998523.1678123860135.JavaMail.zimbra@raptorengineeringinc.com
|
