| Age | Commit message (Collapse) | Author |
|---|
|
PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits
guest control of one or more virtual watchdog timers.
These timers do not conform to PowerPC device conventions. They are
not affixed to any extant bus, nor do they have full representation in
the device tree.
As a workaround we represent them as platform devices.
This patch registers a single platform device, "pseries-wdt", with the
platform bus if the FW_FEATURE_WATCHDOG flag is set.
A driver for this device, "pseries-wdt", will be introduced in a
subsequent patch.
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713202335.1217647-4-cheloha@linux.ibm.com
|
|
PAPR v2.12 specifies a new optional function set, "hcall-watchdog",
for the /rtas/ibm,hypertas-functions property. The presence of this
function set indicates support for the H_WATCHDOG hypercall.
Check for this function set and, if present, set the new
FW_FEATURE_WATCHDOG flag.
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713202335.1217647-3-cheloha@linux.ibm.com
|
|
Returning an error code (here -EBUSY) from a remove callback doesn't
prevent the driver from being unloaded. The only effect is that an error
message is emitted and the driver is removed anyhow.
So instead drop the remove function (which is equivalent to returning zero)
and set the suppress_bind_attrs property to make it impossible to unload
the driver via sysfs.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220612213400.159257-1-u.kleine-koenig@pengutronix.de
|
|
When RDRAND was introduced, there was much discussion on whether it
should be trusted and how the kernel should handle that. Initially, two
mechanisms cropped up, CONFIG_ARCH_RANDOM, a compile time switch, and
"nordrand", a boot-time switch.
Later the thinking evolved. With a properly designed RNG, using RDRAND
values alone won't harm anything, even if the outputs are malicious.
Rather, the issue is whether those values are being *trusted* to be good
or not. And so a new set of options were introduced as the real
ones that people use -- CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu".
With these options, RDRAND is used, but it's not always credited. So in
the worst case, it does nothing, and in the best case, maybe it helps.
Along the way, CONFIG_ARCH_RANDOM's meaning got sort of pulled into the
center and became something certain platforms force-select.
The old options don't really help with much, and it's a bit odd to have
special handling for these instructions when the kernel can deal fine
with the existence or untrusted existence or broken existence or
non-existence of that CPU capability.
Simplify the situation by removing CONFIG_ARCH_RANDOM and using the
ordinary asm-generic fallback pattern instead, keeping the two options
that are actually used. For now it leaves "nordrand" for now, as the
removal of that will take a different route.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Merge our fixes branch. In particular this brings in commit
986481618023 ("powerpc/book3e: Fix PUD allocation size in
map_kernel_page()") which fixes a build failure in next, because commit
2db2008e6363 ("powerpc/64e: Rewrite p4d_populate() as a static inline
function") depends on it.
|
|
The platform device for the rng must be created much later in boot.
Otherwise it tries to connect to a parent that doesn't yet exist,
resulting in this splat:
[ 0.000478] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called.
[ 0.002925] [c000000002a0fb30] [c00000000073b0bc] kobject_get+0x8c/0x100 (unreliable)
[ 0.003071] [c000000002a0fba0] [c00000000087e464] device_add+0xf4/0xb00
[ 0.003194] [c000000002a0fc80] [c000000000a7f6e4] of_device_add+0x64/0x80
[ 0.003321] [c000000002a0fcb0] [c000000000a800d0] of_platform_device_create_pdata+0xd0/0x1b0
[ 0.003476] [c000000002a0fd00] [c00000000201fa44] pnv_get_random_long_early+0x240/0x2e4
[ 0.003623] [c000000002a0fe20] [c000000002060c38] random_init+0xc0/0x214
This patch fixes the issue by doing the platform device creation inside
of machine_subsys_initcall.
Fixes: f3eac426657d ("powerpc/powernv: wire up rng during setup_arch")
Cc: stable@vger.kernel.org
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Change "of node" to "platform device" in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630121654.1939181-1-Jason@zx2c4.com
|
|
Replace single quotes with double quotes which seems to be the convention
for strings.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220520115229.147368-1-juergh@canonical.com
|
|
PowerVM has a stricter policy about allocating TCEs for LPARs and
often there is not enough TCEs for 1:1 mapping, this adds the supported
numbers into dev_info() to help analyzing bugreports.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220601040117.1467710-1-aik@ozlabs.ru
|
|
There is no need to read the H_BLOCK_REMOVE characteristics when running in
Radix mode because this hcall is never called.
Furthermore since the commit 387e220a2e5e ("powerpc/64s: Move hash MMU
support code under CONFIG_PPC_64S_HASH_MMU") define
pseries_lpar_read_hblkrm_characteristics as un empty function if
CONFIG_PPC_64S_HASH_MMU is not set, the #ifdef block can be removed.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220523164353.26441-1-ldufour@linux.ibm.com
|
|
Eliminate direct accesses to the driver_data field.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1653988790-19999-1-git-send-email-baihaowen@meizu.com
|
|
We now have memory organised in a way that allows
implementing KASAN.
Unlike book3s/64, book3e always has translation active so the only
thing needed to use KASAN is to setup an early zero shadow mapping
just after setting a stack pointer and before calling early_setup().
The memory layout is now as follows
+------------------------+ Kernel virtual map end (0xc000200000000000)
| |
| 16TB of KASAN map |
| |
+------------------------+ Kernel KASAN shadow map start
| |
| 16TB of IO map |
| |
+------------------------+ Kernel IO map start
| |
| 16TB of vmemmap |
| |
+------------------------+ Kernel vmemmap start
| |
| 16TB of vmap |
| |
+------------------------+ Kernel virt start (0xc000100000000000)
| |
| 64TB of linear mem |
| |
+------------------------+ Kernel linear (0xc.....)
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0bef8beda27baf71e3b9e8b13e620fba6e19499b.1656427701.git.christophe.leroy@csgroup.eu
|
|
Mapping without BATs doesn't bring any added value to the user.
Remove that option.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6977314c823cfb728bc0273cea634b41807bfb64.1655202721.git.christophe.leroy@csgroup.eu
|
|
Trying to remove asm/ppc_asm.h from all places that don't need it
leads to several failures linked to firmware_has_feature().
To fix it, include asm/firmware.h in all files using
firmware_has_feature()
All users found with:
git grep -L "firmware\.h" ` git grep -l "firmware_has_feature("`
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/11956ec181a034b51a881ac9c059eea72c679a73.1651828453.git.christophe.leroy@csgroup.eu
|
|
note_scsi_host() has been an empty function since
commit 6ee0d9f744d4 ("[POWERPC] Remove unused old code
from powermac setup code").
Remove it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/26f8b72a4276c0bd8ed63860c7316f6361c351b4.1655978907.git.christophe.leroy@csgroup.eu
|
|
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call.
Complicating things, however, is that POWER8 systems need some per-cpu
state and kmalloc, which isn't available at this stage. So we split
things up into an early phase and a later opportunistic phase. This
commit also removes some noisy log messages that don't add much.
Fixes: a4da0d50b2a0 ("powerpc: Implement arch_get_random_long/int() for powernv")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add of_node_put(), use pnv naming, minor change log editing]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621140849.127227-1-Jason@zx2c4.com
|
|
Let GPIO library assign of_node from the parent device.
This allows to move GPIO library and drivers to use fwnode
APIs instead of being stuck with OF-only interfaces.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220507100147.5802-3-andriy.shevchenko@linux.intel.com
|
|
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help
cleaning up other parts of the kernel from OF specific code.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # for i2c-mpc
Acked-by: Wolfram Sang <wsa@kernel.org> # for the I2C part
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for mscan/mpc5xxx_can
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220507100147.5802-2-andriy.shevchenko@linux.intel.com
|
|
It seems mpc52xx_get_xtal_freq() is not used anywhere. Remove dead code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220507100147.5802-1-andriy.shevchenko@linux.intel.com
|
|
asm/machdep.h doesn't need asm/setup.h
Remove it.
Add it directly in files that needs it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3b1dfb19a2c3265fb4abc2bfc7b6eae9261a998b.1654966508.git.christophe.leroy@csgroup.eu
|
|
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com
|
|
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: c25769fddaec ("powerpc/microwatt: Add support for hardware random number generator")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-2-Jason@zx2c4.com
|
|
Sachin reported [1] that on a POWER-10 lpar he is seeing a kernel panic being
reported with vPMEM when papr_scm probe is being called. The panic is of the
form below and is observed only with following option disabled(profile) for the
said LPAR 'Enable Performance Information Collection' in the HMC:
Kernel attempted to write user page (1c) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on write at 0x0000001c
Faulting instruction address: 0xc008000001b90844
Oops: Kernel access of bad area, sig: 11 [#1]
<snip>
NIP [c008000001b90844] drc_pmem_query_stats+0x5c/0x270 [papr_scm]
LR [c008000001b92794] papr_scm_probe+0x2ac/0x6ec [papr_scm]
Call Trace:
0xc00000000941bca0 (unreliable)
papr_scm_probe+0x2ac/0x6ec [papr_scm]
platform_probe+0x98/0x150
really_probe+0xfc/0x510
__driver_probe_device+0x17c/0x230
<snip>
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception
On investigation looks like this panic was caused due to a 'stat_buffer' of
size==0 being provided to drc_pmem_query_stats() to fetch all performance
stats-ids of an NVDIMM. However drc_pmem_query_stats() shouldn't have been called
since the vPMEM NVDIMM doesn't support and performance stat-id's. This was caused
due to missing check for 'p->stat_buffer_len' at the beginning of
papr_scm_pmu_check_events() which indicates that the NVDIMM doesn't support
performance-stats.
Fix this by introducing the check for 'p->stat_buffer_len' at the beginning of
papr_scm_pmu_check_events().
[1] https://lore.kernel.org/all/6B3A522A-6A5F-4CC9-B268-0C63AA6E07D3@linux.ibm.com
Fixes: 0e0946e22f3665d2732 ("powerpc/papr_scm: Fix leaking nvdimm_events_map elements")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220524112353.1718454-1-vaibhav@linux.ibm.com
|
|
This marks more files and functions that can possibly be called in
real mode as not to be instrumented by KASAN. Most were found by
inspection, except for get_pseries_errorlog() which was reported as
causing a crash in testing.
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoX1kZPnmUX4RZEK@cleo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Borislav Petkov:
- Remove all the code around GS switching on 32-bit now that it is not
needed anymore
- Other misc improvements
* tag 'x86_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bug: Use normal relative pointers in 'struct bug_entry'
x86/nmi: Make register_nmi_handler() more robust
x86/asm: Merge load_gs_index()
x86/32: Remove lazy GS macros
ELF: Remove elf_core_copy_kernel_regs()
x86/32: Simplify ELF_CORE_COPY_REGS
|
|
The MPS field in the VF config space is marked as reserved in current
versions of the SR-IOV spec. In other words, this fixup doesn't do
anything.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902035159.1762596-1-oohall@gmail.com
|
|
Currently only FSP based powernv systems supports firmware update
interfaces. Hence check that the token OPAL_FLASH_VALIDATE exists
before initalising the flash driver.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210914101630.30613-1-hegdevasant@linux.vnet.ibm.com
|
|
The of_irq_parse_oldworld() does not modify passed device_node so make
it a pointer to const for safety. Drop the extern while modifying the
line.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210924105653.46963-2-krzysztof.kozlowski@canonical.com
|
|
g5_phy_disable_cpu1() is used outside of platforms/powermac/feature.c,
so it should have a declaration to fix W=1 warning:
arch/powerpc/platforms/powermac/feature.c:1533:6:
error: no previous prototype for ‘g5_phy_disable_cpu1’ [-Werror=missing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210924105653.46963-1-krzysztof.kozlowski@canonical.com
|
|
Rather than waiting for the bots to fix these one-by-one, fix all
occurences of "the the" throughout arch/powerpc.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220518142629.513007-1-mpe@ellerman.id.au
|
|
Use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220225010737.2038781-1-chi.minghao@zte.com.cn
|
|
slot_errbuf_lock has declared and initialized by DEFINE_SPINLOCK,
so we don't need to spin_lock_init again, drop it.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1652232476-9696-1-git-send-email-baihaowen@meizu.com
|
|
Undo effects of misc_register if sysfs init fails after
misc_register.
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220511033507.2745992-1-zhengbin13@huawei.com
|
|
Right now 'char *' elements allocated for individual 'stat_id' in
'papr_scm_priv.nvdimm_events_map[]' during papr_scm_pmu_check_events(), get
leaked in papr_scm_remove() and papr_scm_pmu_register(),
papr_scm_pmu_check_events() error paths.
Also individual 'stat_id' arent NULL terminated 'char *' instead they are fixed
8-byte sized identifiers. However papr_scm_pmu_register() assumes it to be a
NULL terminated 'char *' and at other places it assumes it to be a
'papr_scm_perf_stat.stat_id' sized string which is 8-byes in size.
Fix this by allocating the memory for papr_scm_priv.nvdimm_events_map to also
include space for 'stat_id' entries. This is possible since number of available
events/stat_ids are known upfront. This saves some memory and one extra level of
indirection from 'nvdimm_events_map' to 'stat_id'. Also rest of the code
can continue to call 'kfree(papr_scm_priv.nvdimm_events_map)' without needing to
iterate over the array and free up individual elements.
Fixes: 4c08d4bbc089 ("powerpc/papr_scm: Add perf interface support")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220511082637.646714-1-vaibhav@linux.ibm.com
|
|
powerpc is the only platform that do not rely on
cpu_up()->try_online_node() to bring up a numa node,
and special cases it, instead, deep in its own machinery:
dlpar_online_cpu
find_and_online_cpu_nid
try_online_node
This should not be needed, but the thing is that the try_online_node()
from cpu_up() will not apply on the right node, because cpu_to_node()
will return the old mapping numa<->cpu that gets set on boot stage
for all possible cpus.
That can be seen easily if we try to print out the numa node passed
to try_online_node() in cpu_up().
The thing is that the numa<->cpu mapping does not get updated till a much
later stage in start_secondary:
start_secondary:
set_numa_node(numa_cpu_lookup_table[cpu])
But we do not really care, as we already now the
CPU <-> NUMA associativity back in find_and_online_cpu_nid(),
so let us make use of that and set the proper numa<->cpu mapping,
so cpu_to_node() in cpu_up() returns the right node and
try_online_node() can do its work.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220411074934.4632-1-osalvador@suse.de
|
|
of_find_compatible_node() returns node pointer with refcount incremented,
use of_node_put() on it when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220407090043.2491854-1-lv.ruyi@zte.com.cn
|
|
CONFIG_FSL_85XX_CACHE_SRAM is an option that is not
user selectable and which is not selected by any driver
nor any defconfig.
Remove it and all associated code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9949813a6b758903b7bee910f798ba2ca82ff8ee.1648720908.git.christophe.leroy@csgroup.eu
|
|
Implement a limited form of KASAN for Book3S 64-bit machines running under
the Radix MMU, supporting only outline mode.
- Enable the compiler instrumentation to check addresses and maintain the
shadow region. (This is the guts of KASAN which we can easily reuse.)
- Require kasan-vmalloc support to handle modules and anything else in
vmalloc space.
- KASAN needs to be able to validate all pointer accesses, but we can't
instrument all kernel addresses - only linear map and vmalloc. On boot,
set up a single page of read-only shadow that marks all iomap and
vmemmap accesses as valid.
- Document KASAN in powerpc docs.
Background
----------
KASAN support on Book3S is a bit tricky to get right:
- It would be good to support inline instrumentation so as to be able to
catch stack issues that cannot be caught with outline mode.
- Inline instrumentation requires a fixed offset.
- Book3S runs code with translations off ("real mode") during boot,
including a lot of generic device-tree parsing code which is used to
determine MMU features.
[ppc64 mm note: The kernel installs a linear mapping at effective
address c000...-c008.... This is a one-to-one mapping with physical
memory from 0000... onward. Because of how memory accesses work on
powerpc 64-bit Book3S, a kernel pointer in the linear map accesses the
same memory both with translations on (accessing as an 'effective
address'), and with translations off (accessing as a 'real
address'). This works in both guests and the hypervisor. For more
details, see s5.7 of Book III of version 3 of the ISA, in particular
the Storage Control Overview, s5.7.3, and s5.7.5 - noting that this
KASAN implementation currently only supports Radix.]
- Some code - most notably a lot of KVM code - also runs with translations
off after boot.
- Therefore any offset has to point to memory that is valid with
translations on or off.
One approach is just to give up on inline instrumentation. This way
boot-time checks can be delayed until after the MMU is set is up, and we
can just not instrument any code that runs with translations off after
booting. Take this approach for now and require outline instrumentation.
Previous attempts allowed inline instrumentation. However, they came with
some unfortunate restrictions: only physically contiguous memory could be
used and it had to be specified at compile time. Maybe we can do better in
the future.
[paulus@ozlabs.org - Rebased onto 5.17. Note that a kernel with
CONFIG_KASAN=y will crash during boot on a machine using HPT
translation because not all the entry points to the generic
KASAN code are protected with a call to kasan_arch_is_ready().]
Originally-by: Balbir Singh <bsingharora@gmail.com> # ppc64 out-of-line radix version
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Update copyright year and comment formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTE69OQwiG7z+Gu@cleo
|
|
The kexec code paths involve code that necessarily run in real mode, as
CPUs are disabled and control is transferred to the new kernel. Disable
address sanitization for the kexec code and the functions called in real
mode on CPUs being disabled.
[paulus@ozlabs.org: combined a few work-in-progress commits of
Daniel's and wrote the commit message.]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Move pseries_machine_kexec() into kexec.c so setup.c can be instrumented]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTFSQ2TUSEaDdVC@cleo
|
|
Disable address sanitization for raw and non-maskable interrupt
handlers, because they can run in real mode, where we cannot access
the shadow memory. (Note that kasan_arch_is_ready() doesn't test for
real mode, since it is a static branch for speed, and in any case not
all the entry points to the generic KASAN code are protected by
kasan_arch_is_ready guards.)
The changes to interrupt_nmi_enter/exit_prepare() look larger than
they actually are. The changes are equivalent to adding
!IS_ENABLED(CONFIG_KASAN) to the conditions for calling nmi_enter() or
nmi_exit() in real mode. That is, the code is equivalent to using the
following condition for calling nmi_enter/exit:
if (((!IS_ENABLED(CONFIG_PPC_BOOK3S_64) ||
!firmware_has_feature(FW_FEATURE_LPAR) ||
radix_enabled()) &&
!IS_ENABLED(CONFIG_KASAN) ||
(mfmsr() & MSR_DR))
That unwieldy condition has been split into several statements with
comments, for easier reading.
The nmi_ipi_lock functions that call atomic functions (i.e.,
nmi_ipi_lock_start(), nmi_ipi_lock() and nmi_ipi_unlock()), besides
being marked noinstr, now call arch_atomic_* functions instead of
atomic_* functions because with KASAN enabled, the atomic_* functions
are wrappers which explicitly do address sanitization on their
arguments. Since we are trying to avoid address sanitization, we have
to use the lower-level arch_atomic_* versions.
In hv_nmi_check_nonrecoverable(), the regs_set_unrecoverable() call
has been open-coded so as to avoid having to either trust the inlining
or mark regs_set_unrecoverable() as noinstr.
[paulus@ozlabs.org: combined a few work-in-progress commits of
Daniel's and wrote the commit message.]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTFGaKM8Pd46PIK@cleo
|
|
The device-tree property no-need-store-drain-on-priv-state-switch is
equivalent to H_CPU_BEHAV_NO_STF_BARRIER from the
H_CPU_GET_CHARACTERISTICS hcall on pseries.
Since commit 84ed26fd00c5 ("powerpc/security: Add a security feature for
STF barrier") powernv systems with this device-tree property have been
enabling the STF barrier when they have no need for it. This patch
fixes this by clearing the STF barrier feature on those systems.
Fixes: 84ed26fd00c5 ("powerpc/security: Add a security feature for STF barrier")
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220404101536.104794-2-ruscur@russell.cc
|
|
The device-tree properties no-need-l1d-flush-msr-pr-1-to-0 and
no-need-l1d-flush-kernel-on-user-access are the equivalents of
H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY and H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS
from the H_GET_CPU_CHARACTERISTICS hcall on pseries respectively.
In commit d02fa40d759f ("powerpc/powernv: Remove POWER9 PVR version
check for entry and uaccess flushes") the condition for disabling the
L1D flush on kernel entry and user access was changed from any non-P9
CPU to only checking P7 and P8. Without the appropriate device-tree
checks for newer processors on powernv, these flushes are unnecessarily
enabled on those systems. This patch corrects this.
Fixes: d02fa40d759f ("powerpc/powernv: Remove POWER9 PVR version check for entry and uaccess flushes")
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220404101536.104794-1-ruscur@russell.cc
|
|
VAS entry is created as a misc device and the sysfs comments
should list the proper entries
Reported-by: Matheus Castanho <mscastanho@ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6dee950c7b72a4965c102208041f14a063cf5a8c.camel@linux.ibm.com
|
|
In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com
|
|
At the time being, we use CONFIG_CPU_LITTLE_ENDIAN and
CONFIG_CPU_BIG_ENDIAN to pass -mabi=elfv1 or elfv2 to
compiler, then define a PPC64_ELF_ABI_v1 or PPC64_ELF_ABI_v2
macro in asm/types.h based on _CALL_ELF define set by the compiler.
Make it more straight forward with a CONFIG option that
is directly usable.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1eca1addbc550167da9841c7340a010d0c4b2200.1652074503.git.christophe.leroy@csgroup.eu
|
|
Merge our KVM topic branch.
|
|
LoPAPR defines guest visible IOMMU with hypercalls to use it -
H_PUT_TCE/etc. Implemented first on POWER7 where hypercalls would trap
in the KVM in the real mode (with MMU off). The problem with the real mode
is some memory is not available and some API usage crashed the host but
enabling MMU was an expensive operation.
The problems with the real mode handlers are:
1. Occasionally these cannot complete the request so the code is
copied+modified to work in the virtual mode, very little is shared;
2. The real mode handlers have to be linked into vmlinux to work;
3. An exception in real mode immediately reboots the machine.
If the small DMA window is used, the real mode handlers bring better
performance. However since POWER8, there has always been a bigger DMA
window which VMs use to map the entire VM memory to avoid calling
H_PUT_TCE. Such 1:1 mapping happens once and uses H_PUT_TCE_INDIRECT
(a bulk version of H_PUT_TCE) which virtual mode handler is even closer
to its real mode version.
On POWER9 hypercalls trap straight to the virtual mode so the real mode
handlers never execute on POWER9 and later CPUs.
So with the current use of the DMA windows and MMU improvements in
POWER9 and later, there is no point in duplicating the code.
The 32bit passed through devices may slow down but we do not have many
of these in practice. For example, with this applied, a 1Gbit ethernet
adapter still demostrates above 800Mbit/s of actual throughput.
This removes the real mode handlers from KVM and related code from
the powernv platform.
This updates the list of implemented hcalls in KVM-HV as the realmode
handlers are removed.
This changes ABI - kvmppc_h_get_tce() moves to the KVM module and
kvmppc_find_table() is static now.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506053755.3820702-1-aik@ozlabs.ru
|
|
Merge our fixes branch from this cycle. In particular this brings in a
papr_scm.c change which a subsequent patch has a dependency on.
|
|
Use a kmalloced data structure to store interrupt controller internal
data instead of static global variables.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c8f0866ee013113d5e28948943cf0586e49f5353.1649226186.git.christophe.leroy@csgroup.eu
|
