summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)Author
2019-09-28Merge tag 'powerpc-5.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "An assortment of fixes that were either missed by me, or didn't arrive quite in time for the first v5.4 pull. - Most notable is a fix for an issue with tlbie (broadcast TLB invalidation) on Power9, when using the Radix MMU. The tlbie can race with an mtpid (move to PID register, essentially MMU context switch) on another thread of the core, which can cause stores to continue to go to a page after it's unmapped. - A fix in our KVM code to add a missing barrier, the lack of which has been observed to cause missed IPIs and subsequently stuck CPUs in the host. - A change to the way we initialise PCR (Processor Compatibility Register) to make it forward compatible with future CPUs. - On some older PowerVM systems our H_BLOCK_REMOVE support could oops, fix it to detect such systems and fallback to the old invalidation method. - A fix for an oops seen on some machines when using KASAN on 32-bit. - A handful of other minor fixes, and two new selftests. Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy, Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael Roth, Oliver O'Halloran" * tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error powerpc/nvdimm: Use HCALL error as the return value selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9 powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions powerpc/pseries: Call H_BLOCK_REMOVE when supported powerpc/pseries: Read TLB Block Invalidate Characteristics KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag powerpc/mm: Fix an Oops in kasan_mmu_init() powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY powerpc/64s: Set reserved PCR bits powerpc: Fix definition of PCR bits to work with old binutils powerpc/book3s64/radix: Remove WARN_ON in destroy_context() powerpc/tm: Add tm-poison test
2019-09-25powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP errorAneesh Kumar K.V
Right now we force an unbind of SCM memory at drcindex on H_OVERLAP error. This really slows down operations like kexec where we get the H_OVERLAP error because we don't go through a full hypervisor re init. H_OVERLAP error for a H_SCM_BIND_MEM hcall indicates that SCM memory at drc index is already bound. Since we don't specify a logical memory address for bind hcall, we can use the H_SCM_QUERY hcall to query the already bound logical address. Boot time difference with and without patch is: [ 5.583617] IOMMU table initialized, virtual merging enabled [ 5.603041] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Retrying bind after unbinding [ 301.514221] papr_scm ibm,persistent-memory:ibm,pmemory@44108001: Retrying bind after unbinding [ 340.057238] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs after fix [ 5.101572] IOMMU table initialized, virtual merging enabled [ 5.116984] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Querying SCM details [ 5.117223] papr_scm ibm,persistent-memory:ibm,pmemory@44108001: Querying SCM details [ 5.120530] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903123452.28620-2-aneesh.kumar@linux.ibm.com
2019-09-25powerpc/nvdimm: Use HCALL error as the return valueAneesh Kumar K.V
This simplifies the error handling and also enable us to switch to H_SCM_QUERY hcall in a later patch on H_OVERLAP error. We also do some kernel print formatting fixup in this patch. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903123452.28620-1-aneesh.kumar@linux.ibm.com
2019-09-24Merge branch 'work.mount3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more mount API conversions from Al Viro: "Assorted conversions of options parsing to new API. gfs2 is probably the most serious one here; the rest is trivial stuff. Other things in what used to be #work.mount are going to wait for the next cycle (and preferably go via git trees of the filesystems involved)" * 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: gfs2: Convert gfs2 to fs_context vfs: Convert spufs to use the new mount API vfs: Convert hypfs to use the new mount API hypfs: Fix error number left in struct pointer member vfs: Convert functionfs to use the new mount API vfs: Convert bpf to use the new mount API
2019-09-24powerpc/pseries: Call H_BLOCK_REMOVE when supportedLaurent Dufour
Depending on the hardware and the hypervisor, the hcall H_BLOCK_REMOVE may not be able to process all the page sizes for a segment base page size, as reported by the TLB Invalidate Characteristics. For each pair of base segment page size and actual page size, this characteristic tells us the size of the block the hcall supports. In the case, the hcall is not supporting a pair of base segment page size, actual page size, it is returning H_PARAM which leads to a panic like this: kernel BUG at /home/srikar/work/linux.git/arch/powerpc/platforms/pseries/lpar.c:466! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 28 PID: 583 Comm: modprobe Not tainted 5.2.0-master #5 NIP: c0000000000be8dc LR: c0000000000be880 CTR: 0000000000000000 REGS: c0000007e77fb130 TRAP: 0700 Not tainted (5.2.0-master) MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 42224824 XER: 20000000 CFAR: c0000000000be8fc IRQMASK: 0 GPR00: 0000000022224828 c0000007e77fb3c0 c000000001434d00 0000000000000005 GPR04: 9000000004fa8c00 0000000000000000 0000000000000003 0000000000000001 GPR08: c0000007e77fb450 0000000000000000 0000000000000001 ffffffffffffffff GPR12: c0000007e77fb450 c00000000edfcb80 0000cd7d3ea30000 c0000000016022b0 GPR16: 00000000000000b0 0000cd7d3ea30000 0000000000000001 c080001f04f00105 GPR20: 0000000000000003 0000000000000004 c000000fbeb05f58 c000000001602200 GPR24: 0000000000000000 0000000000000004 8800000000000000 c000000000c5d148 GPR28: c000000000000000 8000000000000000 a000000000000000 c0000007e77fb580 NIP [c0000000000be8dc] .call_block_remove+0x12c/0x220 LR [c0000000000be880] .call_block_remove+0xd0/0x220 Call Trace: 0xc000000fb8c00240 (unreliable) .pSeries_lpar_flush_hash_range+0x578/0x670 .flush_hash_range+0x44/0x100 .__flush_tlb_pending+0x3c/0xc0 .zap_pte_range+0x7ec/0x830 .unmap_page_range+0x3f4/0x540 .unmap_vmas+0x94/0x120 .exit_mmap+0xac/0x1f0 .mmput+0x9c/0x1f0 .do_exit+0x388/0xd60 .do_group_exit+0x54/0x100 .__se_sys_exit_group+0x14/0x20 system_call+0x5c/0x70 Instruction dump: 39400001 38a00000 4800003c 60000000 60420000 7fa9e800 38e00000 419e0014 7d29d278 7d290074 7929d182 69270001 <0b070000> 7d495378 394a0001 7fa93040 The call to H_BLOCK_REMOVE should only be made for the supported pair of base segment page size, actual page size and using the correct maximum block size. Due to the required complexity in do_block_remove() and call_block_remove(), and the fact that currently a block size of 8 is returned by the hypervisor, we are only supporting 8 size block to the H_BLOCK_REMOVE hcall. In order to identify this limitation easily in the code, a local define HBLKR_SUPPORTED_SIZE defining the currently supported block size, and a dedicated checking helper is_supported_hlbkr() are introduced. For regular pages and hugetlb, the assumption is made that the page size is equal to the base page size. For THP the page size is assumed to be 16M. Fixes: ba2dd8a26baa ("powerpc/pseries/mm: call H_BLOCK_REMOVE") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190920130523.20441-3-ldufour@linux.ibm.com
2019-09-24powerpc/pseries: Read TLB Block Invalidate CharacteristicsLaurent Dufour
The PAPR document specifies the TLB Block Invalidate Characteristics which tells for each pair of segment base page size, actual page size, the size of the block the hcall H_BLOCK_REMOVE supports. These characteristics are loaded at boot time in a new table hblkr_size. The table is separate from the mmu_psize_def because this is specific to the pseries platform. A new init function, pseries_lpar_read_hblkrm_characteristics() is added to read the characteristics. It is called from pSeries_setup_arch(). Fixes: ba2dd8a26baa ("powerpc/pseries/mm: call H_BLOCK_REMOVE") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190920130523.20441-2-ldufour@linux.ibm.com
2019-09-24KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flagMichael Roth
On a 2-socket Power9 system with 32 cores/128 threads (SMT4) and 1TB of memory running the following guest configs: guest A: - 224GB of memory - 56 VCPUs (sockets=1,cores=28,threads=2), where: VCPUs 0-1 are pinned to CPUs 0-3, VCPUs 2-3 are pinned to CPUs 4-7, ... VCPUs 54-55 are pinned to CPUs 108-111 guest B: - 4GB of memory - 4 VCPUs (sockets=1,cores=4,threads=1) with the following workloads (with KSM and THP enabled in all): guest A: stress --cpu 40 --io 20 --vm 20 --vm-bytes 512M guest B: stress --cpu 4 --io 4 --vm 4 --vm-bytes 512M host: stress --cpu 4 --io 4 --vm 2 --vm-bytes 256M the below soft-lockup traces were observed after an hour or so and persisted until the host was reset (this was found to be reliably reproducible for this configuration, for kernels 4.15, 4.18, 5.0, and 5.3-rc5): [ 1253.183290] rcu: INFO: rcu_sched self-detected stall on CPU [ 1253.183319] rcu: 124-....: (5250 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=1941 [ 1256.287426] watchdog: BUG: soft lockup - CPU#105 stuck for 23s! [CPU 52/KVM:19709] [ 1264.075773] watchdog: BUG: soft lockup - CPU#24 stuck for 23s! [worker:19913] [ 1264.079769] watchdog: BUG: soft lockup - CPU#31 stuck for 23s! [worker:20331] [ 1264.095770] watchdog: BUG: soft lockup - CPU#45 stuck for 23s! [worker:20338] [ 1264.131773] watchdog: BUG: soft lockup - CPU#64 stuck for 23s! [avocado:19525] [ 1280.408480] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791] [ 1316.198012] rcu: INFO: rcu_sched self-detected stall on CPU [ 1316.198032] rcu: 124-....: (21003 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=8243 [ 1340.411024] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791] [ 1379.212609] rcu: INFO: rcu_sched self-detected stall on CPU [ 1379.212629] rcu: 124-....: (36756 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=14714 [ 1404.413615] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791] [ 1442.227095] rcu: INFO: rcu_sched self-detected stall on CPU [ 1442.227115] rcu: 124-....: (52509 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=21403 [ 1455.111787] INFO: task worker:19907 blocked for more than 120 seconds. [ 1455.111822] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1 [ 1455.111833] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1455.111884] INFO: task worker:19908 blocked for more than 120 seconds. [ 1455.111905] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1 [ 1455.111925] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1455.111966] INFO: task worker:20328 blocked for more than 120 seconds. [ 1455.111986] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1 [ 1455.111998] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1455.112048] INFO: task worker:20330 blocked for more than 120 seconds. [ 1455.112068] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1 [ 1455.112097] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1455.112138] INFO: task worker:20332 blocked for more than 120 seconds. [ 1455.112159] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1 [ 1455.112179] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1455.112210] INFO: task worker:20333 blocked for more than 120 seconds. [ 1455.112231] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1 [ 1455.112242] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1455.112282] INFO: task worker:20335 blocked for more than 120 seconds. [ 1455.112303] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1 [ 1455.112332] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1455.112372] INFO: task worker:20336 blocked for more than 120 seconds. [ 1455.112392] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1 CPUs 45, 24, and 124 are stuck on spin locks, likely held by CPUs 105 and 31. CPUs 105 and 31 are stuck in smp_call_function_many(), waiting on target CPU 42. For instance: # CPU 105 registers (via xmon) R00 = c00000000020b20c R16 = 00007d1bcd800000 R01 = c00000363eaa7970 R17 = 0000000000000001 R02 = c0000000019b3a00 R18 = 000000000000006b R03 = 000000000000002a R19 = 00007d537d7aecf0 R04 = 000000000000002a R20 = 60000000000000e0 R05 = 000000000000002a R21 = 0801000000000080 R06 = c0002073fb0caa08 R22 = 0000000000000d60 R07 = c0000000019ddd78 R23 = 0000000000000001 R08 = 000000000000002a R24 = c00000000147a700 R09 = 0000000000000001 R25 = c0002073fb0ca908 R10 = c000008ffeb4e660 R26 = 0000000000000000 R11 = c0002073fb0ca900 R27 = c0000000019e2464 R12 = c000000000050790 R28 = c0000000000812b0 R13 = c000207fff623e00 R29 = c0002073fb0ca808 R14 = 00007d1bbee00000 R30 = c0002073fb0ca800 R15 = 00007d1bcd600000 R31 = 0000000000000800 pc = c00000000020b260 smp_call_function_many+0x3d0/0x460 cfar= c00000000020b270 smp_call_function_many+0x3e0/0x460 lr = c00000000020b20c smp_call_function_many+0x37c/0x460 msr = 900000010288b033 cr = 44024824 ctr = c000000000050790 xer = 0000000000000000 trap = 100 CPU 42 is running normally, doing VCPU work: # CPU 42 stack trace (via xmon) [link register ] c00800001be17188 kvmppc_book3s_radix_page_fault+0x90/0x2b0 [kvm_hv] [c000008ed3343820] c000008ed3343850 (unreliable) [c000008ed33438d0] c00800001be11b6c kvmppc_book3s_hv_page_fault+0x264/0xe30 [kvm_hv] [c000008ed33439d0] c00800001be0d7b4 kvmppc_vcpu_run_hv+0x8dc/0xb50 [kvm_hv] [c000008ed3343ae0] c00800001c10891c kvmppc_vcpu_run+0x34/0x48 [kvm] [c000008ed3343b00] c00800001c10475c kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm] [c000008ed3343b90] c00800001c0f5a78 kvm_vcpu_ioctl+0x470/0x7c8 [kvm] [c000008ed3343d00] c000000000475450 do_vfs_ioctl+0xe0/0xc70 [c000008ed3343db0] c0000000004760e4 ksys_ioctl+0x104/0x120 [c000008ed3343e00] c000000000476128 sys_ioctl+0x28/0x80 [c000008ed3343e20] c00000000000b388 system_call+0x5c/0x70 --- Exception: c00 (System Call) at 00007d545cfd7694 SP (7d53ff7edf50) is in userspace It was subsequently found that ipi_message[PPC_MSG_CALL_FUNCTION] was set for CPU 42 by at least 1 of the CPUs waiting in smp_call_function_many(), but somehow the corresponding call_single_queue entries were never processed by CPU 42, causing the callers to spin in csd_lock_wait() indefinitely. Nick Piggin suggested something similar to the following sequence as a possible explanation (interleaving of CALL_FUNCTION/RESCHEDULE IPI messages seems to be most common, but any mix of CALL_FUNCTION and !CALL_FUNCTION messages could trigger it): CPU X: smp_muxed_ipi_set_message(): X: smp_mb() X: message[RESCHEDULE] = 1 X: doorbell_global_ipi(42): X: kvmppc_set_host_ipi(42, 1) X: ppc_msgsnd_sync()/smp_mb() X: ppc_msgsnd() -> 42 42: doorbell_exception(): // from CPU X 42: ppc_msgsync() 105: smp_muxed_ipi_set_message(): 105: smb_mb() // STORE DEFERRED DUE TO RE-ORDERING --105: message[CALL_FUNCTION] = 1 | 105: doorbell_global_ipi(42): | 105: kvmppc_set_host_ipi(42, 1) | 42: kvmppc_set_host_ipi(42, 0) | 42: smp_ipi_demux_relaxed() | 42: // returns to executing guest | // RE-ORDERED STORE COMPLETES ->105: message[CALL_FUNCTION] = 1 105: ppc_msgsnd_sync()/smp_mb() 105: ppc_msgsnd() -> 42 42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored 105: // hangs waiting on 42 to process messages/call_single_queue This can be prevented with an smp_mb() at the beginning of kvmppc_set_host_ipi(), such that stores to message[<type>] (or other state indicated by the host_ipi flag) are ordered vs. the store to to host_ipi. However, doing so might still allow for the following scenario (not yet observed): CPU X: smp_muxed_ipi_set_message(): X: smp_mb() X: message[RESCHEDULE] = 1 X: doorbell_global_ipi(42): X: kvmppc_set_host_ipi(42, 1) X: ppc_msgsnd_sync()/smp_mb() X: ppc_msgsnd() -> 42 42: doorbell_exception(): // from CPU X 42: ppc_msgsync() // STORE DEFERRED DUE TO RE-ORDERING -- 42: kvmppc_set_host_ipi(42, 0) | 42: smp_ipi_demux_relaxed() | 105: smp_muxed_ipi_set_message(): | 105: smb_mb() | 105: message[CALL_FUNCTION] = 1 | 105: doorbell_global_ipi(42): | 105: kvmppc_set_host_ipi(42, 1) | // RE-ORDERED STORE COMPLETES -> 42: kvmppc_set_host_ipi(42, 0) 42: // returns to executing guest 105: ppc_msgsnd_sync()/smp_mb() 105: ppc_msgsnd() -> 42 42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored 105: // hangs waiting on 42 to process messages/call_single_queue Fixing this scenario would require an smp_mb() *after* clearing host_ipi flag in kvmppc_set_host_ipi() to order the store vs. subsequent processing of IPI messages. To handle both cases, this patch splits kvmppc_set_host_ipi() into separate set/clear functions, where we execute smp_mb() prior to setting host_ipi flag, and after clearing host_ipi flag. These functions pair with each other to synchronize the sender and receiver sides. With that change in place the above workload ran for 20 hours without triggering any lock-ups. Fixes: 755563bc79c7 ("powerpc/powernv: Fixes for hypervisor doorbell handling") # v4.0 Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190911223155.16045-1-mdroth@linux.vnet.ibm.com
2019-09-20Merge tag 'powerpc-5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This is a bit late, partly due to me travelling, and partly due to a power outage knocking out some of my test systems *while* I was travelling. - Initial support for running on a system with an Ultravisor, which is software that runs below the hypervisor and protects guests against some attacks by the hypervisor. - Support for building the kernel to run as a "Secure Virtual Machine", ie. as a guest capable of running on a system with an Ultravisor. - Some changes to our DMA code on bare metal, to allow devices with medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space. - Support for firmware assisted crash dumps on bare metal (powernv). - Two series fixing bugs in and refactoring our PCI EEH code. - A large series refactoring our exception entry code to use gas macros, both to make it more readable and also enable some future optimisations. As well as many cleanups and other minor features & fixups. Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar, Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde" * tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits) powerpc/mm/mce: Keep irqs disabled during lockless page table walk powerpc: Use ftrace_graph_ret_addr() when unwinding powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR ftrace: Look up the address of return_to_handler() using helpers powerpc: dump kernel log before carrying out fadump or kdump docs: powerpc: Add missing documentation reference powerpc/xmon: Fix output of XIVE IPI powerpc/xmon: Improve output of XIVE interrupts powerpc/mm/radix: remove useless kernel messages powerpc/fadump: support holes in kernel boot memory area powerpc/fadump: remove RMA_START and RMA_END macros powerpc/fadump: update documentation about option to release opalcore powerpc/fadump: consider f/w load area powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel powerpc/fadump: improve how crashed kernel's memory is reserved powerpc/fadump: consider reserved ranges while releasing memory powerpc/fadump: make crash memory ranges array allocation generic ...
2019-09-18vfs: Convert spufs to use the new mount APIDavid Howells
Convert the spufs filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeremy Kerr <jk@ozlabs.org> cc: Arnd Bergmann <arnd@arndb.de> cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-14powerpc/fadump: support holes in kernel boot memory areaHari Bathini
With support to copy multiple kernel boot memory regions owing to copy size limitation, also handle holes in the memory area to be preserved. Support as many as 128 kernel boot memory regions. This allows having an adequate FADump capture kernel size for different scenarios. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821385448.5656.6124791213910877759.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: remove RMA_START and RMA_END macrosHari Bathini
RMA_START is defined as '0' and there is even a BUILD_BUG_ON() to make sure it is never anything else. Remove this macro and use '0' instead as code change is needed anyway when it has to be something else. Also, remove unused RMA_END macro. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821384096.5656.15026984053970204652.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: consider f/w load areaHari Bathini
OPAL loads kernel & initrd at 512MB offset (256MB size), also exported as ibm,opal/dump/fw-load-area. So, if boot memory size of FADump is less than 768MB, kernel memory to be exported as '/proc/vmcore' would be overwritten by f/w while loading kernel & initrd. To avoid such a scenario, enforce a minimum boot memory size of 768MB on OPAL platform and skip using FADump if a newer F/W version loads kernel & initrd above 768MB. Also, irrespective of RMA size, set the minimum boot memory size expected on pseries platform at 320MB. This is to avoid inflating the minimum memory requirements on systems with 512M/1024M RMA size. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821381414.5656.1592867278535469652.stgit@hbathini.in.ibm.com
2019-09-14powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core fileHari Bathini
Writing '1' to /sys/kernel/fadump_release_opalcore would release the memory held by kernel in exporting /sys/firmware/opal/core file. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821380161.5656.17827032108471421830.stgit@hbathini.in.ibm.com
2019-09-14powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashesHari Bathini
Export /sys/firmware/opal/core file to analyze opal crashes. Since OPAL core can be generated independent of CONFIG_FA_DUMP support in kernel, add this support under a new kernel config option CONFIG_OPAL_CORE. Also, avoid code duplication by moving common code used while exporting /proc/vmcore and/or /sys/firmware/opal/core file(s). Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821378503.5656.3693769384945087756.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: add support to preserve crash data on FADUMP disabled kernelHari Bathini
Add a new kernel config option, CONFIG_PRESERVE_FA_DUMP that ensures that crash data, from previously crash'ed kernel, is preserved. This helps in cases where FADump is not enabled but the subsequent memory preserving kernel boot is likely to process this crash data. One typical usecase for this config option is petitboot kernel. As OPAL allows registering address with it in the first kernel and retrieving it after MPIPL, use it to store the top of boot memory. A kernel that intends to preserve crash data retrieves it and avoids using memory beyond this address. Move arch_reserved_kernel_pages() function as it is needed for both FA_DUMP and PRESERVE_FA_DUMP configurations. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821375751.5656.11459483669542541602.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: process architected register state data provided by firmwareHari Bathini
Firmware provides architected register state data at the time of crash. Process this data and build CPU notes to append to ELF core. In case this data is missing or in unsupported format, at least append crashing CPU's register data, to have something to work with in the vmcore file. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821367702.5656.5546683836236508389.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: handle invalidation of crashdump and re-registraionHari Bathini
Make OPAL call to indicate that the dump is processed and the metadata area in OPAL can be cleared/released. Also, setup/initialize FADump for re-registration. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821356046.5656.12270927048195494911.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: Warn before processing partial crashdumpHari Bathini
If all kernel boot memory regions are not registered for MPIPL before system crashes, try processing the partial crashdump but warn the user before proceeding. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821352793.5656.1734051341024721407.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: process the crashdump by exporting it as /proc/vmcoreHari Bathini
Add support in the kernel to process the crash'ed kernel's memory preserved during MPIPL and export it as /proc/vmcore file for the userland scripts to filter and analyze it later. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821351482.5656.6255805804744333073.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: support copying multiple kernel boot memory regionsHari Bathini
Firmware uses a 32-bit field for size while copying/backing-up memory during MPIPL. So, the maximum value that could be represented with a PAGE_SIZE aligned 32-bit field will be the maximum copy size for a region but FADump capture kernel usually needs more memory than that to be preserved to avoid running into out of memory errors. So, request firmware to copy multiple kernel boot memory regions instead of just one (which worked fine for pseries as 64-bit field was used for size there). Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821350193.5656.3664853158523582019.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: define OPAL register/un-register callback functionsHari Bathini
Make OPAL calls to register and un-register with firmware for MPIPL. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821348482.5656.13646250851483648241.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: reset metadata address during clean upHari Bathini
During kexec boot, metadata address needs to be reset to avoid running into errors interpreting stale metadata address, in case the kexec'ed kernel crashes before metadata address could be setup again. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821346629.5656.10783321582005237813.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: register kernel metadata address with opalHari Bathini
OPAL allows registering address with it in the first kernel and retrieving it after MPIPL. Setup kernel metadata and register its address with OPAL to use it for processing the crash dump. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821345011.5656.13567765019032928471.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: add fadump support on powernvHari Bathini
Add basic callback functions for FADump on PowerNV platform. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821342072.5656.4346362203141486452.stgit@hbathini.in.ibm.com
2019-09-14powerpc/opal: add MPIPL interface definitionsHari Bathini
MPIPL is Memory Preserving IPL supported from POWER9. This enables the kernel to reset the system with memory 'preserved'. Also, it supports copying memory from a source address to some destination address during MPIPL boot. Add MPIPL interface definitions here to leverage these f/w features in adding FADump support for PowerNV platform. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821340710.5656.10071829040515662624.stgit@hbathini.in.ibm.com
2019-09-14pseries/fadump: move out platform specific support from generic codeHari Bathini
Move code that supports processing the crash'ed kernel's memory preserved by firmware to platform specific callback functions. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821337690.5656.13050665924800177744.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: add source info while displaying region contentsHari Bathini
Improve how fadump_region contents are displayed by adding source information of memory regions that are to be dumped by f/w. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821334740.5656.5897097884010195405.stgit@hbathini.in.ibm.com
2019-09-14pseries/fadump: define RTAS register/un-register callback functionsHari Bathini
Move platform specific register/un-register code, the RTAS calls, to register/un-register callback functions. This would also mean moving code that initializes and prints the platform specific FADump data. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821332856.5656.16380417702046411631.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: introduce callbacks for platform specific operationsHari Bathini
Introduce callback functions for platform specific operations like register, unregister, invalidate & such. Also, define place-holders for the same on pSeries platform. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821330286.5656.15538934400074110770.stgit@hbathini.in.ibm.com
2019-09-14powerpc/fadump: move rtas specific definitions to platform codeHari Bathini
Currently, FADump is only supported on pSeries but that is going to change soon with FADump support being added on PowerNV platform. So, move rtas specific definitions to platform code to allow FADump to have multiple platforms support. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821328494.5656.16219929140866195511.stgit@hbathini.in.ibm.com
2019-09-14powerpc/powernv: Fix build with IOMMU_API=nMichael Ellerman
The builds breaks when IOMMU_API=n, eg. skiroot_defconfig: arch/powerpc/platforms/powernv/npu-dma.c:96:28: error: 'get_gpu_pci_dev_and_pe' defined but not used arch/powerpc/platforms/powernv/npu-dma.c:126:13: error: 'pnv_npu_set_window' defined but not used Fixes: b4d37a7b6934 ("powerpc/powernv: Remove unused pnv_npu_try_dma_set_bypass() function") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-09-12powerpc/xive: Fix bogus error code returned by OPALGreg Kurz
There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call to return the 32-bit value 0xffffffff when OPAL has run out of IRQs. Unfortunatelty, OPAL return values are signed 64-bit entities and errors are supposed to be negative. If that happens, the linux code confusingly treats 0xffffffff as a valid IRQ number and panics at some point. A fix was recently merged in skiboot: e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()") but we need a workaround anyway to support older skiboots already in the field. Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error returned upon resource exhaustion. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821713818.1985334.14123187368108582810.stgit@bahia.lan
2019-09-12powerpc/pseries: correctly track irq state in default idleNathan Lynch
prep_irq_for_idle() is intended to be called before entering H_CEDE (and it is used by the pseries cpuidle driver). However the default pseries idle routine does not call it, leading to mismanaged lazy irq state when the cpuidle driver isn't in use. Manifestations of this include: * Dropped IPIs in the time immediately after a cpu comes online (before it has installed the cpuidle handler), making the online operation block indefinitely waiting for the new cpu to respond. * Hitting this WARN_ON in arch_local_irq_restore(): /* * We should already be hard disabled here. We had bugs * where that wasn't the case so let's dbl check it and * warn if we are wrong. Only do that when IRQ tracing * is enabled as mfmsr() can be costly. */ if (WARN_ON_ONCE(mfmsr() & MSR_EE)) __hard_irq_disable(); Call prep_irq_for_idle() from pseries_lpar_idle() and honor its result. Fixes: 363edbe2614a ("powerpc: Default arch idle could cede processor on pseries") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.com
2019-09-12powerpc/powernv: Add new opal message typeVasant Hegde
We have OPAL_MSG_PRD message type to pass prd related messages from OPAL to `opal-prd`. It can handle messages upto 64 bytes. We have a requirement to send bigger than 64 bytes of data from OPAL to `opal-prd`. Lets add new message type (OPAL_MSG_PRD2) to pass bigger data. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Make the error string clear that it's the PRD2 event that failed] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190826065701.8853-2-hegdevasant@linux.vnet.ibm.com
2019-09-12powerpc/powernv: Enhance opal message read interfaceVasant Hegde
Use "opal-msg-size" device tree property to allocate memory for "opal_msg". Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: s/uint32_t/u32/ and mark opal_msg_size as __ro_after_init] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190826065701.8853-1-hegdevasant@linux.vnet.ibm.com
2019-09-12powerpc/powernv: Remove unused pnv_npu_try_dma_set_bypass() functionChristoph Hellwig
Neither pnv_npu_try_dma_set_bypass() nor the pnv_npu_dma_set_32() and pnv_npu_dma_set_bypass() helpers called by it are used anywhere in the kernel tree, so remove them. mpe: They're unused since 2d6ad41b2c21 ("powerpc/powernv: use the generic iommu bypass code") removed the last usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903165147.11099-1-hch@lst.de
2019-09-05powerpc/imc: Dont create debugfs files for cpu-less nodesMadhavan Srinivasan
Commit <684d984038aa> ('powerpc/powernv: Add debugfs interface for imc-mode and imc') added debugfs interface for the nest imc pmu devices to support changing of different ucode modes. Primarily adding this capability for debug. But when doing so, the code did not consider the case of cpu-less nodes. So when reading the _cmd_ or _mode_ file of a cpu-less node will create this crash. Faulting instruction address: 0xc0000000000d0d58 Oops: Kernel access of bad area, sig: 11 [#1] ... CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-20190627+ #19 NIP: c0000000000d0d58 LR: c00000000049aa18 CTR:c0000000000d0d50 REGS: c00020194548f9e0 TRAP: 0300 Not tainted (5.2.0-rc6-next-20190627+) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:28022822 XER: 00000000 CFAR: c00000000049aa14 DAR: 000000000003fc08 DSISR:40000000 IRQMASK: 0 ... NIP imc_mem_get+0x8/0x20 LR simple_attr_read+0x118/0x170 Call Trace: simple_attr_read+0x70/0x170 (unreliable) debugfs_attr_read+0x6c/0xb0 __vfs_read+0x3c/0x70 vfs_read+0xbc/0x1a0 ksys_read+0x7c/0x140 system_call+0x5c/0x70 Patch fixes the issue with a more robust check for vbase to NULL. Before patch, ls output for the debugfs imc directory # ls /sys/kernel/debug/powerpc/imc/ imc_cmd_0 imc_cmd_251 imc_cmd_253 imc_cmd_255 imc_mode_0 imc_mode_251 imc_mode_253 imc_mode_255 imc_cmd_250 imc_cmd_252 imc_cmd_254 imc_cmd_8 imc_mode_250 imc_mode_252 imc_mode_254 imc_mode_8 After patch, ls output for the debugfs imc directory # ls /sys/kernel/debug/powerpc/imc/ imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8 Actual bug here is that, we have two loops with potentially different loop counts. That is, in imc_get_mem_addr_nest(), loop count is obtained from the dt entries. But in case of export_imc_mode_and_cmd(), loop was based on for_each_nid() count. Patch fixes the loop count in latter based on the struct mem_info. Ideally it would be better to have array size in struct imc_pmu. Fixes: 684d984038aa ('powerpc/powernv: Add debugfs interface for imc-mode and imc') Reported-by: Qian Cai <cai@lca.pw> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190827101635.6942-1-maddy@linux.vnet.ibm.com
2019-09-05powerpc/64s: remove unnecessary translation cache flushes at bootNicholas Piggin
The various translation structure invalidations performed in early boot when the MMU is off are not required, because everything is invalidated immediately before a CPU first enables its MMU (see early_init_mmu and early_init_mmu_secondary). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190902152931.17840-6-npiggin@gmail.com
2019-09-05powerpc/64s: remove register_process_table callbackNicholas Piggin
This callback is only required because the partition table init comes before process table allocation on powernv (aka bare metal aka native). Change the order to allocate the process table first, and remove the callback. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190902152931.17840-2-npiggin@gmail.com
2019-09-05pci-hotplug/pnv_php: Add support for IODA3 Power9 PHBsOliver O'Halloran
Currently we check that an IODA2 compatible PHB is upstream of this slot. This is mainly to avoid pnv_php creating slots for the various "virtual PHBs" that we create for NVLink. There's no real need for this restriction so allow it on IODA3. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-10-oohall@gmail.com
2019-09-05powernv/eeh: Use generic code to handle hot resetsOliver O'Halloran
When we reset PCI devices managed by a hotplug driver the reset may generate spurious hotplug events that cause the PCI device we're resetting to be torn down accidently. This is a problem for EEH (when the driver is EEH aware) since we want to leave the OS PCI device state intact so that the device can be re-set without losing any resources (network, disks, etc) provided by the driver. Generic PCI code provides the pci_bus_error_reset() function to handle resetting a PCI Device (or bus) by using the reset method provided by the hotplug slot driver. We can use this function if the EEH core has requested a hot reset (common case) without tripping over the hotplug driver. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-8-oohall@gmail.com
2019-09-05powerpc/eeh: Remove stale CAPI commentOliver O'Halloran
Support for switching CAPI cards into and out of CAPI mode was removed a while ago. Drop the comment since it's no longer relevant. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-7-oohall@gmail.com
2019-09-04dma-mapping: provide a better default ->get_required_maskChristoph Hellwig
Most dma_map_ops instances are IOMMUs that work perfectly fine in 32-bits of IOVA space, and the generic direct mapping code already provides its own routines that is intelligent based on the amount of memory actually present. Wire up the dma-direct routine for the ARM direct mapping code as well, and otherwise default to the constant 32-bit mask. This way we only need to override it for the occasional odd IOMMU that requires 64-bit IOVA support, or IOMMU drivers that are more efficient if they can fall back to the direct mapping. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04dma-mapping: explicitly wire up ->mmap and ->get_sgtableChristoph Hellwig
While the default ->mmap and ->get_sgtable implementations work for the majority of our dma_map_ops impementations they are inherently safe for others that don't use the page allocator or CMA and/or use their own way of remapping not covered by the common code. So remove the defaults if these methods are not wired up, but instead wire up the default implementations for all safe instances. Fixes: e1c7e324539a ("dma-mapping: always provide the dma_map_ops based implementation") Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-30powerpc/64s/pseries: machine check convert to use common event codeNicholas Piggin
The common machine_check_event data structures and queues are mostly platform independent, with powernv decoding SRR1/DSISR/etc., into machine_check_event objects. This patch converts pseries to use this infrastructure by decoding fwnmi/rtas data into machine_check_event objects. This allows queueing to be used by a subsequent change to delay the virtual mode handling of machine checks that occur in kernel space where it is unsafe to switch immediately to virtual mode, similarly to powernv. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix implicit fallthrough warnings in mce_handle_error()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-10-npiggin@gmail.com
2019-08-30powerpc/64s/powernv: machine check dump SLB contentsNicholas Piggin
Re-use the code introduced in pseries to save and dump the contents of the SLB in the case of an SLB involved machine check exception. This patch also avoids allocating the SLB save array on pseries radix. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-9-npiggin@gmail.com
2019-08-30powerpc/pseries/svm: Force SWIOTLB for secure guestsAnshuman Khandual
SWIOTLB checks range of incoming CPU addresses to be bounced and sees if the device can access it through its DMA window without requiring bouncing. In such cases it just chooses to skip bouncing. But for cases like secure guests on powerpc platform all addresses need to be bounced into the shared pool of memory because the host cannot access it otherwise. Hence the need to do the bouncing is not related to device's DMA window and use of bounce buffers is forced by setting swiotlb_force. Also, connect the shared memory conversion functions into the ARCH_HAS_MEM_ENCRYPT hooks and call swiotlb_update_mem_attributes() to convert SWIOTLB's memory pool to shared memory. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [ bauerman: Use ARCH_HAS_MEM_ENCRYPT hooks to share swiotlb memory pool. ] Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-15-bauerman@linux.ibm.com
2019-08-30powerpc/pseries/iommu: Don't use dma_iommu_ops on secure guestsThiago Jung Bauermann
Secure guest memory is inacessible to devices so regular DMA isn't possible. In that case set devices' dma_map_ops to NULL so that the generic DMA code path will use SWIOTLB to bounce buffers for DMA. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-14-bauerman@linux.ibm.com
2019-08-30powerpc/pseries/svm: Disable doorbells in SVM guestsSukadev Bhattiprolu
Normally, the HV emulates some instructions like MSGSNDP, MSGCLRP from a KVM guest. To emulate the instructions, it must first read the instruction from the guest's memory and decode its parameters. However for a secure guest (aka SVM), the page containing the instruction is in secure memory and the HV cannot access directly. It would need the Ultravisor (UV) to facilitate accessing the instruction and parameters but the UV currently does not have the support for such accesses. Until the UV has such support, disable doorbells in SVMs. This might incur a performance hit but that is yet to be quantified. With this patch applied (needed only in SVMs not needed for HV) we are able to launch SVM guests with multi-core support. Eg: qemu -smp sockets=2,cores=2,threads=2. Fix suggested by Benjamin Herrenschmidt. Thanks to input from Paul Mackerras, Ram Pai and Michael Anderson. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-13-bauerman@linux.ibm.com
2019-08-30powerpc/pseries/svm: Use shared memory for Debug Trace Log (DTL)Anshuman Khandual
Secure guests need to share the DTL buffers with the hypervisor. To that end, use a kmem_cache constructor which converts the underlying buddy allocated SLUB cache pages into shared memory. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-10-bauerman@linux.ibm.com
generated by cgit (git 2.34.1) at 2024-05-29 12:11:00 +0000