summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2018-06-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more kvm updates from Paolo Bonzini: "Mostly the PPC part of the release, but also switching to Arnd's fix for the hyperv config issue and a typo fix. Main PPC changes: - reimplement the MMIO instruction emulation - transactional memory support for PR KVM - improve radix page table handling" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits) KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV KVM: x86: fix typo at kvm_arch_hardware_setup comment KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts KVM: PPC: Book3S PR: Handle additional interrupt types KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state KVM: PPC: Book3S PR: Add emulation for trechkpt. KVM: PPC: Book3S PR: Add emulation for treclaim. KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs KVM: PPC: Book3S PR: Always fail transactions in guest privileged state ...
2018-06-15treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAXStefan Agner
With PHYS_ADDR_MAX there is now a type safe variant for all bits set. Make use of it. Patch created using a semantic patch as follows: // <smpl> @@ typedef phys_addr_t; @@ -(phys_addr_t)ULLONG_MAX +PHYS_ADDR_MAX // </smpl> Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-14Merge tag 'kvm-ppc-next-4.18-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
2018-06-13Merge tag 'kbuild-v4.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix some bugs introduced by the recent Kconfig syntax extension - add some symbols about compiler information in Kconfig, such as CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc. - test compiler capability for the stack protector in Kconfig, and clean-up Makefile - test compiler capability for GCC-plugins in Kconfig, and clean-up Makefile - allow to enable GCC-plugins for COMPILE_TEST - test compiler capability for KCOV in Kconfig and correct dependency - remove auto-detect mode of the GCOV format, which is now more nicely handled in Kconfig - test compiler capability for mprofile-kernel on PowerPC, and clean-up Makefile - misc cleanups * tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify() kconfig: fix localmodconfig sh: remove no-op macro VMLINUX_SYMBOL() powerpc/kbuild: move -mprofile-kernel check to Kconfig Documentation: kconfig: add recommended way to describe compiler support gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST gcc-plugins: test plugin support in Kconfig and clean up Makefile gcc-plugins: move GCC version check for PowerPC to Kconfig kcov: test compiler capability in Kconfig and correct dependency gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig kconfig: add CC_IS_CLANG and CLANG_VERSION kconfig: add CC_IS_GCC and GCC_VERSION stack-protector: test compiler capability in Kconfig and drop AUTO mode kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-13KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulationSimon Guo
tabort. will perform transaction failure recording and the recording depends on TEXASR FS bit. Currently the TEXASR FS bit is retrieved after tabort., when the TEXASR FS bit is already been updated by tabort. itself. This patch corrects this behavior by retrieving TEXASR val before tabort. tabort. will not immediately leads to transaction failure handling in suspend state. So this patch also remove the mtspr on TEXASR/TFIAR registers to avoid TM bad thing exception. Fixes: 26798f88d58d ("KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state") Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-13KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT modePaul Mackerras
It turns out that PR KVM has no dependency on the format of HPTEs, because it uses functions pointed to by mmu_hash_ops which do all the formatting and interpretation of HPTEs. Thus we can allow PR KVM to load on POWER9 bare-metal hosts as long as they are running in HPT mode. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-13KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bitPaul Mackerras
PAPR guests run in supervisor mode and should not be able to set the MSR HV (hypervisor mode) bit or clear the ME (machine check enable) bit by mtmsrd or any other means. To enforce this, we force MSR_HV off and MSR_ME on in kvmppc_set_msr_pr. Without this, the guest can appear to be in hypervisor mode to itself and to userspace. This has been observed to cause a crash in QEMU when it tries to deliver a system reset interrupt to the guest. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-13KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulationPaul Mackerras
The treclaim. emulation needs to record failure status in the TEXASR register if the transaction had not previously failed. However, the current code first does kvmppc_save_tm_pr() (which does a treclaim. itself) and then checks the failure summary bit in TEXASR after that. Since treclaim. itself causes transaction failure, the FS bit is always set, so we were never updating TEXASR with the failure cause supplied by the guest as the RA parameter to the treclaim. instruction. This caused the tm-unavailable test in tools/testing/selftests/powerpc/tm to fail. To fix this, we need to read TEXASR before calling kvmppc_save_tm_pr(), and base the final value of TEXASR on that value. Fixes: 03c81682a90b ("KVM: PPC: Book3S PR: Add emulation for treclaim.") Reviewed-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-13KVM: PPC: Book3S PR: Fix MSR setting when delivering interruptsPaul Mackerras
This makes sure that MSR "partial-function" bits are not transferred to SRR1 when delivering an interrupt. This was causing failures in guests running kernels that include commit f3d96e698ed0 ("powerpc/mm: Overhaul handling of bad page faults", 2017-07-19), which added code to check bits of SRR1 on instruction storage interrupts (ISIs) that indicate a bad page fault. The symptom was that a guest user program that handled a signal and attempted to return from the signal handler would get a SIGBUS signal and die. The code that generated ISIs and some other interrupts would previously set bits in the guest MSR to indicate the interrupt status and then call kvmppc_book3s_queue_irqprio(). This technique no longer works now that kvmppc_inject_interrupt() is masking off those bits. Instead we make kvmppc_core_queue_data_storage() and kvmppc_core_queue_inst_storage() call kvmppc_inject_interrupt() directly, and make sure that all the places that generate ISIs or DSIs call kvmppc_core_queue_{data,inst}_storage instead of kvmppc_book3s_queue_irqprio(). Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-13KVM: PPC: Book3S PR: Handle additional interrupt typesCameron Kaiser
This adds trivial handling for additional interrupt types that KVM-PR must support for proper virtualization on a POWER9 host in HPT mode, as a further prerequisite to enabling KVM-PR on that configuration. Signed-off-by: Cameron Kaiser <spectre@floodgap.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small update for KVM: ARM: - lazy context-switching of FPSIMD registers on arm64 - "split" regions for vGIC redistributor s390: - cleanups for nested - clock handling - crypto - storage keys - control register bits x86: - many bugfixes - implement more Hyper-V super powers - implement lapic_timer_advance_ns even when the LAPIC timer is emulated using the processor's VMX preemption timer. - two security-related bugfixes at the top of the branch" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits) kvm: fix typo in flag name kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system KVM: x86: introduce linear_{read,write}_system kvm: nVMX: Enforce cpl=0 for VMX instructions kvm: nVMX: Add support for "VMWRITE to any supported field" kvm: nVMX: Restrict VMX capability MSR changes KVM: VMX: Optimize tscdeadline timer latency KVM: docs: nVMX: Remove known limitations as they do not exist now KVM: docs: mmu: KVM support exposing SLAT to guests kvm: no need to check return value of debugfs_create functions kvm: Make VM ioctl do valloc for some archs kvm: Change return type to vm_fault_t KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008 kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation KVM: introduce kvm_make_vcpus_request_mask() API KVM: x86: hyperv: do rep check for each hypercall separately ...
2018-06-11powerpc/kbuild: move -mprofile-kernel check to KconfigNicholas Piggin
This eliminates the workaround that requires disabling -mprofile-kernel by default in Kconfig. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-11gcc-plugins: move GCC version check for PowerPC to KconfigMasahiro Yamada
For PowerPC, GCC 5.2 is the requirement for GCC plugins. Move the version check to Kconfig so that the GCC plugin menus will be hidden if an older compiler is in use. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-06-10Merge branch 'core-rseq-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull restartable sequence support from Thomas Gleixner: "The restartable sequences syscall (finally): After a lot of back and forth discussion and massive delays caused by the speculative distraction of maintainers, the core set of restartable sequences has finally reached a consensus. It comes with the basic non disputed core implementation along with support for arm, powerpc and x86 and a full set of selftests It was exposed to linux-next earlier this week, so it does not fully comply with the merge window requirements, but there is really no point to drag it out for yet another cycle" * 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: Provide Makefile, scripts, gitignore rseq/selftests: Provide parametrized tests rseq/selftests: Provide basic percpu ops test rseq/selftests: Provide basic test rseq/selftests: Provide rseq library selftests/lib.mk: Introduce OVERRIDE_TARGETS powerpc: Wire up restartable sequences system call powerpc: Add syscall detection for restartable sequences powerpc: Add support for restartable sequences x86: Wire up restartable sequence system call x86: Add support for restartable sequences arm: Wire up restartable sequences system call arm: Add syscall detection for restartable sequences arm: Add restartable sequences support rseq: Introduce restartable sequences system call uapi/headers: Provide types_32_64.h
2018-06-07mm: introduce ARCH_HAS_PTE_SPECIALLaurent Dufour
Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07Merge tag 'powerpc-4.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for split PMD page table lock on 64-bit Book3S (Power8/9). - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live patching again. - Add support for patching barrier_nospec in copy_from_user() and syscall entry. - A couple of fixes for our data breakpoints on Book3S. - A series from Nick optimising TLB/mm handling with the Radix MMU. - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre. - Several series optimising various parts of the 32-bit code from Christophe Leroy. - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"), which is why the diffstat has so many deletions. And many other small improvements & fixes. There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details around pkey support. It was ack'ed/reviewed by Ingo & Dave and has been in next for several weeks. Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing" * tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits) powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap cpuidle: powernv: Fix promotion from snooze if next state disabled powerpc: fix build failure by disabling attribute-alias warning in pci_32 ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait() powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted" powerpc: fix spelling mistake: "Usupported" -> "Unsupported" powerpc/pkeys: Detach execute_only key on !PROT_EXEC powerpc/powernv: copy/paste - Mask SO bit in CR powerpc: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove support for Marvell mv64x60 i2c controller powerpc/boot: Remove support for Marvell MPSC serial controller powerpc/embedded6xx: Remove C2K board support powerpc/lib: optimise PPC32 memcmp powerpc/lib: optimise 32 bits __clear_user() powerpc/time: inline arch_vtime_task_switch() powerpc/Makefile: set -mcpu=860 flag for the 8xx powerpc: Implement csum_ipv6_magic in assembly powerpc/32: Optimise __csum_partial() powerpc/lib: Adjust .balign inside string functions for PPC32 ...
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-06Merge tag 'kbuild-v4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - improve fixdep to coalesce consecutive slashes in dep-files - fix some issues of the maintainer string generation in deb-pkg script - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up several tools and linker scripts - clean-up modpost - allow to enable the dead code/data elimination for PowerPC in EXPERT mode - improve two coccinelle scripts for better performance - pass endianness and machine size flags to sparse for all architecture - misc fixes * tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add machine size to CHECKFLAGS kbuild: add endianness flag to CHEKCFLAGS kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice scripts: Fixed printf format mismatch scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation coccinelle: deref_null: improve performance coccinelle: mini_lock: improve performance powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION modpost: constify *modname function argument where possible modpost: remove redundant is_vmlinux() test modpost: use strstarts() helper more widely modpost: pass struct elf_info pointer to get_modinfo() checkpatch: remove VMLINUX_SYMBOL() check vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL() kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX export.h: remove code for prefixing symbols with underscore depmod.sh: remove symbol prefix support ...
2018-06-06powerpc: Wire up restartable sequences system callBoqun Feng
Wire up the rseq system call on powerpc. This provides an ABI improving the speed of a user-space getcpu operation on powerpc by skipping the getcpu system call on the fast path, as well as improving the speed of user-space operations on per-cpu data compared to using load-reservation/store-conditional atomics. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joel Fernandes <joelaf@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Chris Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Hunter <ahh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Maurer <bmaurer@fb.com> Cc: linux-api@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20180602124408.8430-11-mathieu.desnoyers@efficios.com
2018-06-06powerpc: Add syscall detection for restartable sequencesBoqun Feng
Syscalls are not allowed inside restartable sequences, so add a call to rseq_syscall() at the very beginning of system call exiting path for CONFIG_DEBUG_RSEQ=y kernel. This could help us to detect whether there is a syscall issued inside restartable sequences. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joel Fernandes <joelaf@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Chris Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Hunter <ahh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Maurer <bmaurer@fb.com> Cc: linux-api@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20180602124408.8430-10-mathieu.desnoyers@efficios.com
2018-06-06powerpc: Add support for restartable sequencesBoqun Feng
Call the rseq_handle_notify_resume() function on return to userspace if TIF_NOTIFY_RESUME thread flag is set. Perform fixup on the pre-signal when a signal is delivered on top of a restartable sequence critical section. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joel Fernandes <joelaf@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Chris Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Hunter <ahh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Maurer <bmaurer@fb.com> Cc: linux-api@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20180602124408.8430-9-mathieu.desnoyers@efficios.com
2018-06-06powerpc/64s/radix: Fix missing ptesync in flush_cache_vmapNicholas Piggin
There is a typo in f1cb8f9beb ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags") config ifdef, which results in the necessary ptesync not being issued after vmalloc. This causes random kernel faults in module load, bpf load, anywhere that vmalloc mappings are used. After correcting the code, this survives a guest kernel booting hundreds of times where previously there would be a crash every few boots (I haven't noticed the crash on host, perhaps due to different TLB and page table walking behaviour in hardware). A memory clobber is also added to the flush, just to be sure it won't be reordered with the pte set or the subsequent mapping access. Fixes: f1cb8f9beb ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-05Merge tag 'char-misc-4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the "big" char and misc driver patches for 4.18-rc1. It's not a lot of stuff here, but there are some highlights: - coreboot driver updates - soundwire driver updates - android binder updates - fpga big sync, mostly documentation - lots of minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits) vmw_balloon: fixing double free when batching mode is off MAINTAINERS: Add driver-api/fpga path fpga: clarify that unregister functions also free documentation: fpga: move fpga-region.txt to driver-api documentation: fpga: add bridge document to driver-api documentation: fpga: move fpga-mgr.txt to driver-api Documentation: fpga: move fpga overview to driver-api fpga: region: kernel-doc fixes fpga: bridge: kernel-doc fixes fpga: mgr: kernel-doc fixes fpga: use SPDX fpga: region: change api, add fpga_region_create/free fpga: bridge: change api, don't use drvdata fpga: manager: change api, don't use drvdata fpga: region: don't use drvdata in common fpga code Drivers: hv: vmbus: Removed an unnecessary cast from void * ver_linux: Drop redundant calls to system() to test if file is readable ver_linux: Move stderr redirection from function parameter to function body misc: IBM Virtual Management Channel Driver (VMC) rpmsg: Correct support for MODULE_DEVICE_TABLE() ...
2018-06-05powerpc: fix build failure by disabling attribute-alias warning in pci_32Christophe Leroy
Commit 2479bfc9bc600 ("powerpc: Fix build by disabling attribute-alias warning for SYSCALL_DEFINEx") forgot arch/powerpc/kernel/pci_32.c Latest GCC version emit the following warnings As arch/powerpc code is built with -Werror, this breaks build with GCC 8.1 This patch inhibits this warning In file included from arch/powerpc/kernel/pci_32.c:14: ./include/linux/syscalls.h:233:18: error: 'sys_pciconfig_iobase' alias between functions of incompatible types 'long int(long int, long unsigned int, long unsigned int)' and 'long int(long int, long int, long int)' [-Werror=attribute-alias] asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ ^~~ ./include/linux/syscalls.h:222:2: note: in expansion of macro '__SYSCALL_DEFINEx' __SYSCALL_DEFINEx(x, sname, __VA_ARGS__) ^~~~~~~~~~~~~~~~~ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04Merge branch 'timers-2038-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull time/Y2038 updates from Thomas Gleixner: - Consolidate SySV IPC UAPI headers - Convert SySV IPC to the new COMPAT_32BIT_TIME mechanism - Cleanup the core interfaces and standardize on the ktime_get_* naming convention. - Convert the X86 platform ops to timespec64 - Remove the ugly temporary timespec64 hack * 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86: Convert x86_platform_ops to timespec64 timekeeping: Add more coarse clocktai/boottime interfaces timekeeping: Add ktime_get_coarse_with_offset timekeeping: Standardize on ktime_get_*() naming timekeeping: Clean up ktime_get_real_ts64 timekeeping: Remove timespec64 hack y2038: ipc: Redirect ipc(SEMTIMEDOP, ...) to compat_ksys_semtimedop y2038: ipc: Enable COMPAT_32BIT_TIME y2038: ipc: Use __kernel_timespec y2038: ipc: Report long times to user space y2038: ipc: Use ktime_get_real_seconds consistently y2038: xtensa: Extend sysvipc data structures y2038: powerpc: Extend sysvipc data structures y2038: sparc: Extend sysvipc data structures y2038: parisc: Extend sysvipc data structures y2038: mips: Extend sysvipc data structures y2038: arm64: Extend sysvipc compat data structures y2038: s390: Remove unneeded ipc uapi header files y2038: ia64: Remove unneeded ipc uapi header files y2038: alpha: Remove unneeded ipc uapi header files ...
2018-06-04Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timers and timekeeping updates from Thomas Gleixner: - Core infrastucture work for Y2038 to address the COMPAT interfaces: + Add a new Y2038 safe __kernel_timespec and use it in the core code + Introduce config switches which allow to control the various compat mechanisms + Use the new config switch in the posix timer code to control the 32bit compat syscall implementation. - Prevent bogus selection of CPU local clocksources which causes an endless reselection loop - Remove the extra kthread in the clocksource code which has no value and just adds another level of indirection - The usual bunch of trivial updates, cleanups and fixlets all over the place - More SPDX conversions * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) clocksource/drivers/mxs_timer: Switch to SPDX identifier clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Remove outdated file path clocksource/drivers/arc_timer: Add comments about locking while read GFRC clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages clocksource/drivers/sprd: Fix Kconfig dependency clocksource: Move inline keyword to the beginning of function declarations timer_list: Remove unused function pointer typedef timers: Adjust a kernel-doc comment tick: Prefer a lower rating device only if it's CPU local device clocksource: Remove kthread time: Change nanosleep to safe __kernel_* types time: Change types to new y2038 safe __kernel_* types time: Fix get_timespec64() for y2038 safe compat interfaces time: Add new y2038 safe __kernel_timespec posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_64BIT_TIME in architectures compat: Enable compat_get/put_timespec64 always ...
2018-06-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: - Consolidation of softirq pending: The softirq mask and its accessors/mutators have many implementations scattered around many architectures. Most do the same things consisting in a field in a per-cpu struct (often irq_cpustat_t) accessed through per-cpu ops. We can provide instead a generic efficient version that most of them can use. In fact s390 is the only exception because the field is stored in lowcore. - Support for level!?! triggered MSI (ARM) Over the past couple of years, we've seen some SoCs coming up with ways of signalling level interrupts using a new flavor of MSIs, where the MSI controller uses two distinct messages: one that raises a virtual line, and one that lowers it. The target MSI controller is in charge of maintaining the state of the line. This allows for a much simplified HW signal routing (no need to have hundreds of discrete lines to signal level interrupts if you already have a memory bus), but results in a departure from the current idea the kernel has of MSIs. - Support for Meson-AXG GPIO irqchip - Large stm32 irqchip rework (suspend/resume, hierarchical domains) - More SPDX conversions * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) ARM: dts: stm32: Add exti support to stm32mp157 pinctrl ARM: dts: stm32: Add exti support for stm32mp157c pinctrl/stm32: Add irq_eoi for stm32gpio irqchip irqchip/stm32: Add suspend/resume support for hierarchy domain irqchip/stm32: Add stm32mp1 support with hierarchy domain irqchip/stm32: Prepare common functions irqchip/stm32: Add host and driver data structures irqchip/stm32: Add suspend support irqchip/stm32: Add falling pending register support irqchip/stm32: Checkpatch fix irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain irqchip/meson-gpio: Add support for Meson-AXG SoCs dt-bindings: interrupt-controller: New binding for Meson-AXG SoC dt-bindings: interrupt-controller: Fix the double quotes softirq/s390: Move default mutators of overwritten softirq mask to s390 softirq/x86: Switch to generic local_softirq_pending() implementation softirq/sparc: Switch to generic local_softirq_pending() implementation softirq/powerpc: Switch to generic local_softirq_pending() implementation softirq/parisc: Switch to generic local_softirq_pending() implementation softirq/ia64: Switch to generic local_softirq_pending() implementation ...
2018-06-05powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"Colin Ian King
Trivial fix to spelling mistake in hmi_error_types text Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Stewart Smith <stewart@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-05powerpc: fix spelling mistake: "Usupported" -> "Unsupported"Colin Ian King
Trivial fix to spelling mistake in bootx_printf message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-05powerpc/pkeys: Detach execute_only key on !PROT_EXECRam Pai
Disassociate the exec_key from a VMA if the VMA permission is not PROT_EXEC anymore. Otherwise the exec_only key continues to be associated with the vma, causing unexpected behavior. The problem was reported on x86 by Shakeel Butt, which is also applicable on powerpc. Fixes: 5586cf61e108 ("powerpc: introduce execute-only pkey") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "This set of changes close the known issues with setting si_code to an invalid value, and with not fully initializing struct siginfo. There remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64 and x86 to get the code that generates siginfo into a simpler and more maintainable state. Most of that work involves refactoring the signal handling code and thus careful code review. Also not included is the work to shrink the in kernel version of struct siginfo. That depends on getting the number of places that directly manipulate struct siginfo under control, as it requires the introduction of struct kernel_siginfo for the in kernel things. Overall this set of changes looks like it is making good progress, and with a little luck I will be wrapping up the siginfo work next development cycle" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits) signal/sh: Stop gcc warning about an impossible case in do_divide_error signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions signal/um: More carefully relay signals in relay_signal. signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code signal/signalfd: Add support for SIGSYS signal/signalfd: Remove __put_user from signalfd_copyinfo signal/xtensa: Use force_sig_fault where appropriate signal/xtensa: Consistenly use SIGBUS in do_unaligned_user signal/um: Use force_sig_fault where appropriate signal/sparc: Use force_sig_fault where appropriate signal/sparc: Use send_sig_fault where appropriate signal/sh: Use force_sig_fault where appropriate signal/s390: Use force_sig_fault where appropriate signal/riscv: Replace do_trap_siginfo with force_sig_fault signal/riscv: Use force_sig_fault where appropriate signal/parisc: Use force_sig_fault where appropriate signal/parisc: Use force_sig_mceerr where appropriate signal/openrisc: Use force_sig_fault where appropriate signal/nios2: Use force_sig_fault where appropriate ...
2018-06-04Merge tag 'docs-4.18' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "There's been a fair amount of work in the docs tree this time around, including: - Extensive RST conversions and organizational work in the memory-management docs thanks to Mike Rapoport. - An update of Documentation/features from Andrea Parri and a script to keep it updated. - Various LICENSES updates from Thomas, along with a script to check SPDX tags. - Work to fix dangling references to documentation files; this involved a fair number of one-liner comment changes outside of Documentation/ ... and the usual list of documentation improvements, typo fixes, etc" * tag 'docs-4.18' of git://git.lwn.net/linux: (103 commits) Documentation: document hung_task_panic kernel parameter docs/admin-guide/mm: add high level concepts overview docs/vm: move ksm and transhuge from "user" to "internals" section. docs: Use the kerneldoc comments for memalloc_no*() doc: document scope NOFS, NOIO APIs docs: update kernel versions and dates in tables docs/vm: transhuge: split userspace bits to admin-guide/mm/transhuge docs/vm: transhuge: minor updates docs/vm: transhuge: change sections order Documentation: arm: clean up Marvell Berlin family info Documentation: gpio: driver: Fix a typo and some odd grammar docs: ranoops.rst: fix location of ramoops.txt scripts/documentation-file-ref-check: rewrite it in perl with auto-fix mode docs: uio-howto.rst: use a code block to solve a warning mm, THP, doc: Add document for thp_swpout/thp_swpout_fallback w1: w1_io.c: fix a kernel-doc warning Documentation/process/posting: wrap text at 80 cols docs: admin-guide: add cgroup-v2 documentation Revert "Documentation/features/vm: Remove arch support status file for 'pte_special'" Documentation: refcount-vs-atomic: Update reference to LKMM doc. ...
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-06-04powerpc/powernv: copy/paste - Mask SO bit in CRHaren Myneni
NX can set the 3rd bit in CR register for XER[SO] (Summary overflow) which is not related to paste request. The current paste function returns failure for a successful request when this bit is set. So mask this bit and check the proper return status. Fixes: 2392c8c8c045 ("powerpc/powernv/vas: Define copy/paste interfaces") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc: Remove core support for Marvell mv64x60 hostbridgesMark Greer
There are no longer any platforms that use Marvell's mv64x60 hostbridges so remove the supporting kernel code. CC: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/boot: Remove core support for Marvell mv64x60 hostbridgesMark Greer
There are no longer any platforms that use Marvell's mv64x60 hostbridges so remove the supporting boot code. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/boot: Remove support for Marvell mv64x60 i2c controllerMark Greer
There are no longer any platforms that use Marvell's mv64x60's i2c controller so remove its driver. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Mark Greer &lt;<a href="mailto:mgreer@animalcreek.com">mgreer@animalcreek.com</a>&gt;<br> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/boot: Remove support for Marvell MPSC serial controllerMark Greer
There are no longer any platforms that use Marvell's MPSC serial controller so remove its driver. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/embedded6xx: Remove C2K board supportMark Greer
The C2K platform appears to be orphaned so remove code supporting it. CC: Remi Machet <rmachet@nvidia.com> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Remi Machet <remi@machet.us> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/lib: optimise PPC32 memcmpChristophe Leroy
At the time being, memcmp() compares two chunks of memory byte per byte. This patch optimises the comparison by comparing word by word. On the same way as commit 15c2d45d17418 ("powerpc: Add 64bit optimised memcmp"), this patch moves memcmp() into a dedicated file named memcmp_32.S A small benchmark performed on an 8xx comparing two chuncks of 512 bytes performed 100000 times gives: Before : 5852274 TB ticks After: 1488638 TB ticks This is almost 4 times faster Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/lib: optimise 32 bits __clear_user()Christophe Leroy
Rewrite clear_user() on the same principle as memset(0), making use of dcbz to clear complete cache lines. This code is a copy/paste of memset(), with some modifications in order to retrieve remaining number of bytes to be cleared, as it needs to be returned in case of error. On the same way as done on PPC64 in commit 17968fbbd19f1 ("powerpc: 64bit optimised __clear_user"), the patch moves __clear_user() into a dedicated file string_32.S On a MPC885, throughput is almost doubled: Before: ~# dd if=/dev/zero of=/dev/null bs=1M count=1000 1048576000 bytes (1000.0MB) copied, 18.990779 seconds, 52.7MB/s After: ~# dd if=/dev/zero of=/dev/null bs=1M count=1000 1048576000 bytes (1000.0MB) copied, 9.611468 seconds, 104.0MB/s On a MPC8321, throughput is multiplied by 2.12: Before: root@vgoippro:~# dd if=/dev/zero of=/dev/null bs=1M count=1000 1048576000 bytes (1000.0MB) copied, 6.844352 seconds, 146.1MB/s After: root@vgoippro:~# dd if=/dev/zero of=/dev/null bs=1M count=1000 1048576000 bytes (1000.0MB) copied, 3.218854 seconds, 310.7MB/s Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/time: inline arch_vtime_task_switch()Christophe Leroy
arch_vtime_task_switch() is a small function which is called only from vtime_common_task_switch(), so it is worth inlining Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/Makefile: set -mcpu=860 flag for the 8xxChristophe Leroy
When compiled with GCC 8.1, vmlinux is significantly bigger than with GCC 4.8. When looking at the generated code with objdump, we notice that all functions and loops when a 16 bytes alignment. This significantly increases the size of the kernel. It is pointless and even counterproductive as on the 8xx 'nop' also consumes one clock cycle. Size of vmlinux with GCC 4.8: text data bss dec hex filename 5801948 1626076 457796 7885820 7853fc vmlinux Size of vmlinux with GCC 8.1: text data bss dec hex filename 6764592 1630652 456476 8851720 871108 vmlinux Size of vmlinux with GCC 8.1 and this patch: text data bss dec hex filename 6331544 1631756 456476 8419776 8079c0 vmlinux Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc: Implement csum_ipv6_magic in assemblyChristophe Leroy
The generic csum_ipv6_magic() generates a pretty bad result 00000000 <csum_ipv6_magic>: (PPC32) 0: 81 23 00 00 lwz r9,0(r3) 4: 81 03 00 04 lwz r8,4(r3) 8: 7c e7 4a 14 add r7,r7,r9 c: 7d 29 38 10 subfc r9,r9,r7 10: 7d 4a 51 10 subfe r10,r10,r10 14: 7d 27 42 14 add r9,r7,r8 18: 7d 2a 48 50 subf r9,r10,r9 1c: 80 e3 00 08 lwz r7,8(r3) 20: 7d 08 48 10 subfc r8,r8,r9 24: 7d 4a 51 10 subfe r10,r10,r10 28: 7d 29 3a 14 add r9,r9,r7 2c: 81 03 00 0c lwz r8,12(r3) 30: 7d 2a 48 50 subf r9,r10,r9 34: 7c e7 48 10 subfc r7,r7,r9 38: 7d 4a 51 10 subfe r10,r10,r10 3c: 7d 29 42 14 add r9,r9,r8 40: 7d 2a 48 50 subf r9,r10,r9 44: 80 e4 00 00 lwz r7,0(r4) 48: 7d 08 48 10 subfc r8,r8,r9 4c: 7d 4a 51 10 subfe r10,r10,r10 50: 7d 29 3a 14 add r9,r9,r7 54: 7d 2a 48 50 subf r9,r10,r9 58: 81 04 00 04 lwz r8,4(r4) 5c: 7c e7 48 10 subfc r7,r7,r9 60: 7d 4a 51 10 subfe r10,r10,r10 64: 7d 29 42 14 add r9,r9,r8 68: 7d 2a 48 50 subf r9,r10,r9 6c: 80 e4 00 08 lwz r7,8(r4) 70: 7d 08 48 10 subfc r8,r8,r9 74: 7d 4a 51 10 subfe r10,r10,r10 78: 7d 29 3a 14 add r9,r9,r7 7c: 7d 2a 48 50 subf r9,r10,r9 80: 81 04 00 0c lwz r8,12(r4) 84: 7c e7 48 10 subfc r7,r7,r9 88: 7d 4a 51 10 subfe r10,r10,r10 8c: 7d 29 42 14 add r9,r9,r8 90: 7d 2a 48 50 subf r9,r10,r9 94: 7d 08 48 10 subfc r8,r8,r9 98: 7d 4a 51 10 subfe r10,r10,r10 9c: 7d 29 2a 14 add r9,r9,r5 a0: 7d 2a 48 50 subf r9,r10,r9 a4: 7c a5 48 10 subfc r5,r5,r9 a8: 7c 63 19 10 subfe r3,r3,r3 ac: 7d 29 32 14 add r9,r9,r6 b0: 7d 23 48 50 subf r9,r3,r9 b4: 7c c6 48 10 subfc r6,r6,r9 b8: 7c 63 19 10 subfe r3,r3,r3 bc: 7c 63 48 50 subf r3,r3,r9 c0: 54 6a 80 3e rotlwi r10,r3,16 c4: 7c 63 52 14 add r3,r3,r10 c8: 7c 63 18 f8 not r3,r3 cc: 54 63 84 3e rlwinm r3,r3,16,16,31 d0: 4e 80 00 20 blr 0000000000000000 <.csum_ipv6_magic>: (PPC64) 0: 81 23 00 00 lwz r9,0(r3) 4: 80 03 00 04 lwz r0,4(r3) 8: 81 63 00 08 lwz r11,8(r3) c: 7c e7 4a 14 add r7,r7,r9 10: 7f 89 38 40 cmplw cr7,r9,r7 14: 7d 47 02 14 add r10,r7,r0 18: 7d 30 10 26 mfocrf r9,1 1c: 55 29 f7 fe rlwinm r9,r9,30,31,31 20: 7d 4a 4a 14 add r10,r10,r9 24: 7f 80 50 40 cmplw cr7,r0,r10 28: 7d 2a 5a 14 add r9,r10,r11 2c: 80 03 00 0c lwz r0,12(r3) 30: 81 44 00 00 lwz r10,0(r4) 34: 7d 10 10 26 mfocrf r8,1 38: 55 08 f7 fe rlwinm r8,r8,30,31,31 3c: 7d 29 42 14 add r9,r9,r8 40: 81 04 00 04 lwz r8,4(r4) 44: 7f 8b 48 40 cmplw cr7,r11,r9 48: 7d 29 02 14 add r9,r9,r0 4c: 7d 70 10 26 mfocrf r11,1 50: 55 6b f7 fe rlwinm r11,r11,30,31,31 54: 7d 29 5a 14 add r9,r9,r11 58: 7f 80 48 40 cmplw cr7,r0,r9 5c: 7d 29 52 14 add r9,r9,r10 60: 7c 10 10 26 mfocrf r0,1 64: 54 00 f7 fe rlwinm r0,r0,30,31,31 68: 7d 69 02 14 add r11,r9,r0 6c: 7f 8a 58 40 cmplw cr7,r10,r11 70: 7c 0b 42 14 add r0,r11,r8 74: 81 44 00 08 lwz r10,8(r4) 78: 7c f0 10 26 mfocrf r7,1 7c: 54 e7 f7 fe rlwinm r7,r7,30,31,31 80: 7c 00 3a 14 add r0,r0,r7 84: 7f 88 00 40 cmplw cr7,r8,r0 88: 7d 20 52 14 add r9,r0,r10 8c: 80 04 00 0c lwz r0,12(r4) 90: 7d 70 10 26 mfocrf r11,1 94: 55 6b f7 fe rlwinm r11,r11,30,31,31 98: 7d 29 5a 14 add r9,r9,r11 9c: 7f 8a 48 40 cmplw cr7,r10,r9 a0: 7d 29 02 14 add r9,r9,r0 a4: 7d 70 10 26 mfocrf r11,1 a8: 55 6b f7 fe rlwinm r11,r11,30,31,31 ac: 7d 29 5a 14 add r9,r9,r11 b0: 7f 80 48 40 cmplw cr7,r0,r9 b4: 7d 29 2a 14 add r9,r9,r5 b8: 7c 10 10 26 mfocrf r0,1 bc: 54 00 f7 fe rlwinm r0,r0,30,31,31 c0: 7d 29 02 14 add r9,r9,r0 c4: 7f 85 48 40 cmplw cr7,r5,r9 c8: 7c 09 32 14 add r0,r9,r6 cc: 7d 50 10 26 mfocrf r10,1 d0: 55 4a f7 fe rlwinm r10,r10,30,31,31 d4: 7c 00 52 14 add r0,r0,r10 d8: 7f 80 30 40 cmplw cr7,r0,r6 dc: 7d 30 10 26 mfocrf r9,1 e0: 55 29 ef fe rlwinm r9,r9,29,31,31 e4: 7c 09 02 14 add r0,r9,r0 e8: 54 03 80 3e rotlwi r3,r0,16 ec: 7c 03 02 14 add r0,r3,r0 f0: 7c 03 00 f8 not r3,r0 f4: 78 63 84 22 rldicl r3,r3,48,48 f8: 4e 80 00 20 blr This patch implements it in assembly for both PPC32 and PPC64 Link: https://github.com/linuxppc/linux/issues/9 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>