| Age | Commit message (Collapse) | Author |
|---|
|
The msr check in kvmppc_handle_exit_hv() is not needed for nestedv2 hosts,
skip the check to avoid a H_GUEST_GET_STATE hcall.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-9-vaibhav@linux.ibm.com
|
|
There is no need to inject an external interrupt in
kvmppc_book3s_irqprio_deliver() as the test for BOOK3S_IRQPRIO_EXTERNAL
in kvmhv_run_single_vcpu() before guest entry will raise LPCR_MER if
needed. There is also no need to inject the decrementer interrupt as
this will be raised within the L2 if needed. Avoiding these injections
reduces H_GUEST_GET_STATE hcalls by the L1.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-8-vaibhav@linux.ibm.com
|
|
Commit 026728dc5d41 ("KVM: PPC: Book3S HV P9: Inject pending xive
interrupts at guest entry") changed guest entry so that if external
interrupts are enabled, BOOK3S_IRQPRIO_EXTERNAL is not tested for. Test
for this regardless of MSR_EE.
For an L1 host, do not inject an interrupt, but always
use LPCR_MER. If the L0 desires it can inject an interrupt.
Fixes: 026728dc5d41 ("KVM: PPC: Book3S HV P9: Inject pending xive interrupts at guest entry")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[jpn: use kvmpcc_get_msr(), write commit message]
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-7-vaibhav@linux.ibm.com
|
|
LPCR_MER is conditionally set during entry to a guest if there is a
pending external interrupt. In the nestedv2 case, this change is not
being communicated to the L0, which means it is not being set in the L2.
Ensure the updated LPCR value is passed to the L0.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-6-vaibhav@linux.ibm.com
|
|
kvmhv_copy_tofrom_guest_radix() gets the PID at the start of the
function. If pid is not used, then this is a wasteful H_GUEST_GET_STATE
hcall for nestedv2 hosts. Move the assignment to where pid will be used.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-5-vaibhav@linux.ibm.com
|
|
The check for a hcall coming from userspace is done for KVM-PR. This is
not supported for nestedv2 and the L0 will directly inject the necessary
exception to the L2 if userspace performs a hcall. Avoid checking the
MSR and thus avoid a H_GUEST_GET_STATE hcall in the L1.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-4-vaibhav@linux.ibm.com
|
|
The kvmppc_get_tb_offset() getter reloads KVMPPC_GSID_TB_OFFSET from the
L0 for nestedv2 host. This is unnecessary as the value does not change.
KVMPPC_GSID_TB_OFFSET also need not be reloaded in
kvmppc_{s,g}et_dec_expires().
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-3-vaibhav@linux.ibm.com
|
|
An L0 must invalidate the L2's RPT during H_GUEST_DELETE if this has not
already been done. This is a slow operation that means H_GUEST_DELETE
must return H_BUSY multiple times before completing. Invalidating the
tables before deleting the guest so there is less work for the L0 to do.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-2-vaibhav@linux.ibm.com
|
|
Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix
stack unwind") added use of a new stack frame on ftrace entry to fix
stack unwind. However, the commit missed updating the offset used while
tearing down the ftrace stack when ftrace is disabled. Fix the same.
In addition, the commit missed saving the correct stack pointer in
pt_regs. Update the same.
Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org
|
|
Replace 0x7f literals with PCI_HEADER_TYPE_MASK.
Link: https://lore.kernel.org/r/20231124090919.23687-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When an add operation for multiple LMBs fails, there is currently
little indication from the kernel of what went wrong. Be a little more
verbose about error conditions in the add paths.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-3-fb8f2bb7c557@linux.ibm.com
|
|
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
dump_stack_lvl+0xa4/0xfc (unreliable)
print_report+0x214/0x63c
kasan_report+0x140/0x2e0
__asan_load8+0xa8/0xe0
dlpar_memory+0x298/0x1658
handle_dlpar_errorlog+0x130/0x1d0
dlpar_store+0x18c/0x3e0
kobj_attr_store+0x68/0xa0
sysfs_kf_write+0xc4/0x110
kernfs_fop_write_iter+0x26c/0x390
vfs_write+0x2d4/0x4e0
ksys_write+0xac/0x1a0
system_call_exception+0x268/0x530
system_call_vectored_common+0x15c/0x2ec
Allocated by task 1:
kasan_save_stack+0x48/0x80
kasan_set_track+0x34/0x50
kasan_save_alloc_info+0x34/0x50
__kasan_kmalloc+0xd0/0x120
__kmalloc+0x8c/0x320
kmalloc_array.constprop.0+0x48/0x5c
drmem_init+0x2a0/0x41c
do_one_initcall+0xe0/0x5c0
kernel_init_freeable+0x4ec/0x5a0
kernel_init+0x30/0x1e0
ret_from_kernel_user_thread+0x14/0x1c
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com
|
|
Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is
not set). Fixes these build errors:
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system':
ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data'
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe':
ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver'
Fixes: 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202312010820.cmdwF5X9-lkp@intel.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201055159.8371-1-rdunlap@infradead.org
|
|
s/singals/signals/
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231124100241.660374-1-dario.binacchi@amarulasolutions.com
|
|
HeXin Tech Co. has applied for a new PVN from the OpenPower Community
for its new processor C2000. The OpenPower has assigned a new PVN
and this newly assigned PVN is 0x0066, add pvr register related
support for this PVN.
Signed-off-by: Zhao Ke <ke.zhao@shingroup.cn>
Link: https://discuss.openpower.foundation/t/how-to-get-a-new-pvr-for-processors-follow-power-isa/477/10
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129075845.57976-1-ke.zhao@shingroup.cn
|
|
With CONFIG_GENERIC_BUG=n the build fails with:
arch/powerpc/kernel/traps.c:1442:5: error: no previous prototype for ‘is_valid_bugaddr’ [-Werror=missing-prototypes]
1442 | int is_valid_bugaddr(unsigned long addr)
| ^~~~~~~~~~~~~~~~
The prototype is only defined, and the function is only needed, when
CONFIG_GENERIC_BUG=y, so move the implementation under that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130114433.3053544-2-mpe@ellerman.id.au
|
|
With NUMA=n and FA_DUMP=y or PRESERVE_FA_DUMP=y the build fails with:
arch/powerpc/kernel/fadump.c:1739:22: error: no previous prototype for ‘arch_reserved_kernel_pages’ [-Werror=missing-prototypes]
1739 | unsigned long __init arch_reserved_kernel_pages(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
The prototype for arch_reserved_kernel_pages() is in include/linux/mm.h,
but it's guarded by __HAVE_ARCH_RESERVED_KERNEL_PAGES. The powerpc
headers define __HAVE_ARCH_RESERVED_KERNEL_PAGES in asm/mmzone.h, which
is not included into the generic headers when NUMA=n.
Move the definition of __HAVE_ARCH_RESERVED_KERNEL_PAGES into asm/mmu.h
which is included regardless of NUMA=n.
Additionally the ifdef around __HAVE_ARCH_RESERVED_KERNEL_PAGES needs to
also check for CONFIG_PRESERVE_FA_DUMP.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130114433.3053544-1-mpe@ellerman.id.au
|
|
The compiler doesn't know that `32` is an offset into the Hash table:
56 struct Hash_ctx {
57 u8 H[16]; /* subkey */
58 u8 Htable[256]; /* Xi, Hash table(offset 32) */
59 };
So, it legitimately complains about a potential out-of-bounds issue
if `256 bytes` are accessed in `htable` (this implies going
`32 bytes` beyond the boundaries of `Htable`):
arch/powerpc/crypto/aes-gcm-p10-glue.c: In function 'gcmp10_init':
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: error: 'gcm_init_htable' accessing 256 bytes in a region of size 224 [-Werror=stringop-overflow=]
120 | gcm_init_htable(hash->Htable+32, hash->H);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 1 of type 'unsigned char[256]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 2 of type 'unsigned char[16]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:40:17: note: in a call to function 'gcm_init_htable'
40 | asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]);
| ^~~~~~~~~~~~~~~
Address this by avoiding specifying the size of `htable` in the function
prototype; and just for consistency, do the same for parameter `Xi`.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20231121131903.68a37932@canb.auug.org.au/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
KVM_CAP_DEVICE_CTRL allows userspace to check if the kvm_device
framework (e.g. KVM_CREATE_DEVICE) is supported by KVM. Move
KVM_CAP_DEVICE_CTRL to the generic check for the two reasons:
1) it already supports arch agnostic usages (i.e. KVM_DEV_TYPE_VFIO).
For example, userspace VFIO implementation may needs to create
KVM_DEV_TYPE_VFIO on x86, riscv, or arm etc. It is simpler to have it
checked at the generic code than at each arch's code.
2) KVM_CREATE_DEVICE has been added to the generic code.
Link: https://lore.kernel.org/all/20221215115207.14784-1-wei.w.wang@intel.com
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Acked-by: Anup Patel <anup@brainfault.org> (riscv)
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230315101606.10636-1-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
With CONFIG_NUMA=n the build fails with:
arch/powerpc/mm/book3s64/pgtable.c:275:15: error: no previous prototype for ‘create_section_mapping’ [-Werror=missing-prototypes]
275 | int __meminit create_section_mapping(unsigned long start, unsigned long end,
| ^~~~~~~~~~~~~~~~~~~~~~
That happens because the prototype for create_section_mapping() is in
asm/mmzone.h, but asm/mmzone.h is only included by linux/mmzone.h
when CONFIG_NUMA=y.
In fact the prototype is only needed by arch/powerpc/mm code, so move
the prototype into arch/powerpc/mm/mmu_decl.h, which also fixes the
build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-5-mpe@ellerman.id.au
|
|
The 44x/fsp2_defconfig build fails with:
arch/powerpc/platforms/44x/idle.c:30:12: error: no previous prototype for ‘ppc44x_idle_init’ [-Werror=missing-prototypes]
30 | int __init ppc44x_idle_init(void)
| ^~~~~~~~~~~~~~~~
Fix it by making ppc44x_idle_init() static.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-4-mpe@ellerman.id.au
|
|
The mpc512x_defconfig build fails with:
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c:142:1: error: no previous prototype for ‘mpc5121_ads_cpld_map’ [-Werror=missing-prototypes]
142 | mpc5121_ads_cpld_map(void)
| ^~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c:157:1: error: no previous prototype for ‘mpc5121_ads_cpld_pic_init’ [-Werror=missing-prototypes]
157 | mpc5121_ads_cpld_pic_init(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
There are prototypes for these functions but the header they are in is
not included by mpc5121_ads_cpld.c. Include it to fix the build error.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-3-mpe@ellerman.id.au
|
|
The mpc512x_defconfig config fails with:
arch/powerpc/platforms/512x/pdm360ng.c:104:13: error: no previous prototype for ‘pdm360ng_init’ [-Werror=missing-prototypes]
104 | void __init pdm360ng_init(void)
| ^~~~~~~~~~~~~
Fix it by making pdm360ng_init() static.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-2-mpe@ellerman.id.au
|
|
With HIBERNATION=y the build breaks with:
arch/powerpc/kernel/swsusp_64.c:14:6: error: no previous prototype for ‘do_after_copyback’ [-Werror=missing-prototypes]
14 | void do_after_copyback(void)
| ^~~~~~~~~~~~~~~~~
do_after_copyback() is only called from asm, so there is no prototype,
nor any header where it makes sense to place one. Just add a prototype
in the C file to fix the build error.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-1-mpe@ellerman.id.au
|
|
Before running a guest, the host process (e.g., QEMU) FP/VEC registers
are saved if they were being used, similarly to when the kernel uses FP
registers. The guest values are then loaded into regs, and the host
process registers will be restored lazily when it uses FP/VEC.
KVM HV has a bug here: the host process registers do get saved, but the
user MSR bits remain enabled, which indicates the registers are valid
for the process. After they are clobbered by running the guest, this
valid indication causes the host process to take on the FP/VEC register
values of the guest.
Fixes: 34e119c96b2b ("KVM: PPC: Book3S HV P9: Reduce mtmsrd instructions required to save host SPRs")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231122025811.2973-1-npiggin@gmail.com
|
|
As part of my quest to enable -Wmissing-prototypes by default,
these patches clean up some of the prototypes that are needed by all
architectures but are handled inconsistently.
The duplicate prototypes are moved into common code, which helps both
to clean up the existing warnings and simplifies the logic.
* asm-generic-prototypes:
arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
csky: fix arch_jump_label_transform_static override
arch: add do_page_fault prototypes
arch: add missing prepare_ftrace_return() prototypes
arch: vdso: consolidate gettime prototypes
arch: include linux/cpu.h for trap_init() prototype
arch: fix asm-offsets.c building with -Wmissing-prototypes
arch: consolidate arch_irq_work_raise prototypes
|
|
During floating point and vector save to thread data f0/vs0 are
clobbered by the FPSCR/VSCR store routine. This has been obvserved to
lead to userspace register corruption and application data corruption
with io-uring.
Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for
all the FP, altivec, VMX register save paths.
Tested under QEMU in kvm mode, running on a Talos II workstation with
dual POWER9 DD2.2 CPUs.
Additional detail (mpe):
Typically save_fpu() is called from __giveup_fpu() which saves the FP
regs and also *turns off FP* in the tasks MSR, meaning the kernel will
reload the FP regs from the thread struct before letting the task use FP
again. So in that case save_fpu() is free to clobber f0 because the FP
regs no longer hold live values for the task.
There is another case though, which is the path via:
sys_clone()
...
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
That path saves the FP regs but leaves them live. That's meant as an
optimisation for a process that's using FP/VSX and then calls fork(),
leaving the regs live means the parent process doesn't have to take a
fault after the fork to get its FP regs back. The optimisation was added
in commit 8792468da5e1 ("powerpc: Add the ability to save FPU without
giving it up").
That path does clobber f0, but f0 is volatile across function calls,
and typically programs reach copy_process() from userspace via a syscall
wrapper function. So in normal usage f0 being clobbered across a
syscall doesn't cause visible data corruption.
But there is now a new path, because io-uring can call copy_process()
via create_io_thread() from the signal handling path. That's OK if the
signal is handled as part of syscall return, but it's not OK if the
signal is handled due to some other interrupt.
That path is:
interrupt_return_srr_user()
interrupt_exit_user_prepare()
interrupt_exit_user_prepare_main()
do_notify_resume()
get_signal()
task_work_run()
create_worker_cb()
create_io_worker()
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
if (tsk->thread.regs->msr & MSR_FP)
save_fpu()
# f0 is clobbered and potentially live in userspace
Note the above discussion applies equally to save_altivec().
Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up")
Cc: stable@vger.kernel.org # v4.6+
Closes: https://lore.kernel.org/all/480932026.45576726.1699374859845.JavaMail.zimbra@raptorengineeringinc.com/
Closes: https://lore.kernel.org/linuxppc-dev/480221078.47953493.1700206777956.JavaMail.zimbra@raptorengineeringinc.com/
Tested-by: Timothy Pearson <tpearson@raptorengineering.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[mpe: Reword change log to describe exact path of corruption & other minor tweaks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1921539696.48534988.1700407082933.JavaMail.zimbra@raptorengineeringinc.com
|
|
The rtas_read_config() and rtas_write_config() functions in
kernel/rtas_pci.c have external linkage and two users in arch/powerpc:
the rtas_pci code itself and the pseries platform's "enhanced error
handling" (EEH) support code.
The prototypes for these functions in asm/ppc-pci.h have until now
been guarded by CONFIG_EEH since the only external caller is the
pseries EEH code. However, this presumably has always generated
warnings when built with !CONFIG_EEH and -Wmissing-prototypes:
arch/powerpc/kernel/rtas_pci.c:46:5: error: no previous prototype for
function 'rtas_read_config' [-Werror,-Wmissing-prototypes]
46 | int rtas_read_config(struct pci_dn *pdn, int where,
int size, u32 *val)
arch/powerpc/kernel/rtas_pci.c:98:5: error: no previous prototype for
function 'rtas_write_config' [-Werror,-Wmissing-prototypes]
98 | int rtas_write_config(struct pci_dn *pdn, int where,
int size, u32 val)
The introduction of commit c6345dfa6e3e ("Makefile.extrawarn: turn on
missing-prototypes globally") forces the issue.
The efika and chrp platform code have (static) functions with the same
names but different signatures. We may as well eliminate the potential
for conflicts and confusion by renaming the globally visible versions
as their prototypes get moved out of the CONFIG_EEH-guarded region;
their current names are too generic anyway. Since they operate on
objects of the type 'struct pci_dn *', give them the slightly more
verbose prefix "rtas_pci_dn_" and fix up all the call sites.
Fixes: c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linuxppc-dev/CA+G9fYt0LLXtjSz+Hkf3Fhm-kf0ZQanrhUS+zVZGa3O+Wt2+vg@mail.gmail.com/
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127-rtas-pci-rw-config-v1-1-385d29ace3df@linux.ibm.com
|
|
The linux-next build of powerpc64 allnoconfig fails with:
arch/powerpc/mm/book3s64/pgtable.c:557:5: error: no previous prototype for 'pmd_move_must_withdraw'
557 | int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
| ^~~~~~~~~~~~~~~~~~~~~~
Caused by commit:
c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally")
Fix it by moving the function definition under
CONFIG_TRANSPARENT_HUGEPAGE like the prototype. The function is only
called when CONFIG_TRANSPARENT_HUGEPAGE=y.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[mpe: Flesh out change log from linux-next patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127132809.45c2b398@canb.auug.org.au
|
|
Some of the fp/vmx code in sstep.c assume a certain maximum size for the
instructions being emulated. The size of those operations however is
determined separately in analyse_instr().
Add a check to validate the assumption on the maximum size of the
operations, so as to prevent any unintended kernel stack corruption.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231123071705.397625-1-naveen@kernel.org
|
|
Building with GCC with -Warray-bounds enabled there are several warnings
in sstep.c along the lines of:
In function ‘do_byte_reverse’,
inlined from ‘do_vec_load’ at arch/powerpc/lib/sstep.c:691:3,
inlined from ‘emulate_loadstore’ at arch/powerpc/lib/sstep.c:3439:9:
arch/powerpc/lib/sstep.c:289:23: error: array subscript 2 is outside array bounds of ‘u8[16]’ {aka ‘unsigned char[16]’} [-Werror=array-bounds=]
289 | up[2] = byterev_8(up[1]);
| ~~~~~~^~~~~~~~~~~~~~~~~~
arch/powerpc/lib/sstep.c: In function ‘emulate_loadstore’:
arch/powerpc/lib/sstep.c:681:11: note: at offset 16 into object ‘u’ of size 16
681 | } u = {};
| ^
do_byte_reverse() supports a size up to 32 bytes, but in these cases the
caller is only passing a 16 byte buffer. In practice there is no bug,
do_vec_load() is only called from the LOAD_VMX case in emulate_loadstore().
That in turn is only reached when analyse_instr() recognises VMX ops,
and in all cases the size is no greater than 16:
$ git grep -w LOAD_VMX arch/powerpc/lib/sstep.c
arch/powerpc/lib/sstep.c: op->type = MKOP(LOAD_VMX, 0, 1);
arch/powerpc/lib/sstep.c: op->type = MKOP(LOAD_VMX, 0, 2);
arch/powerpc/lib/sstep.c: op->type = MKOP(LOAD_VMX, 0, 4);
arch/powerpc/lib/sstep.c: op->type = MKOP(LOAD_VMX, 0, 16);
Similarly for do_vec_store().
Although the warning is incorrect, the code would be safer if it clamped
the size from the caller to the known size of the buffer. Do that using
min_t().
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Closes: https://lore.kernel.org/linuxppc-dev/YpbUcPrm61RLIiZF@debian.me/
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Closes: https://lore.kernel.org/linuxppc-dev/20221212215117.aa7255t7qd6yefk4@lug-owl.de/
Reported-by: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Closes: https://lore.kernel.org/linuxppc-dev/6a8bf78c-aedb-4d5a-b0aa-82a51a17b884@embeddedor.com/
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Build-tested-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231120235436.1569255-1-mpe@ellerman.id.au
|
|
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231122030651.3818-1-chentao@kylinos.cn
|
|
crtsavres.o is linked to modules. However, as explained in commit
d0e628cd817f ("kbuild: doc: clarify the difference between extra-y
and always-y"), 'make modules' does not build extra-y.
For example, the following command fails:
$ make ARCH=powerpc LLVM=1 KBUILD_MODPOST_WARN=1 mrproper ps3_defconfig modules
[snip]
LD [M] arch/powerpc/platforms/cell/spufs/spufs.ko
ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory
make[3]: *** [scripts/Makefile.modfinal:56: arch/powerpc/platforms/cell/spufs/spufs.ko] Error 1
make[2]: *** [Makefile:1844: modules] Error 2
make[1]: *** [/home/masahiro/workspace/linux-kbuild/Makefile:350: __build_one_by_one] Error 2
make: *** [Makefile:234: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa25b571a16 ("powerpc/64: Do not link crtsavres.o in vmlinux")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231120232332.4100288-1-masahiroy@kernel.org
|
|
The call to grackle_set_stg() ("Store Gathering") has always been inside
an #ifdef 0, since the code was first merged in v2.3.43pre7.
Apparently it was suspected of causing problems on some hardware so was
disabled. No one has ever proved otherwise so drop the code as unused
for now.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://lore.kernel.org/all/20231031145600.GA9161@bhelgaas/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231113051929.1952351-1-mpe@ellerman.id.au
|
|
Commit fb5a515704d7 ("powerpc: Remove platforms/wsp and associated
pieces") removed the A2 CPU support, but missed removal of reg_a2.h.
None of the defines contained in it are used, with the exception of the
SPRN_TEN* values, but they are also defined in reg_booke.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231113043947.1931831-1-mpe@ellerman.id.au
|
|
The cpu_spec is a struct holding various information about the CPU the
kernel is executing on. It's populated early in boot and must not change
after that.
In particular the cpu_features and mmu_features hold the set of
discovered CPU/MMU features and are used to set static keys for each
feature, and do binary patching of assembly. So any change to the
cpu_features/mmu_features later in boot will not be reflected in
the state of the static keys or patched code.
There is already logic to check that cpu_features/mmu_features don't
change, see check_features() in feature-fixups.c.
But as another layer of protection the entire cpu_spec should be read
only after init, annotate it as such.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231025012452.1985680-1-mpe@ellerman.id.au
|
|
Enable CONFIG_MEM_SOFT_DIRTY to get some test coverage. Distros enable
it, and it has been broken previously. See commit 66b2ca086210
("powerpc/64s/radix: Fix soft dirty tracking").
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231024112726.1819795-1-mpe@ellerman.id.au
|
|
Saves a pointer per struct dentry and actually makes the things less
clumsy. Cleaned the d_walk() and dcache_readdir() a bit by use
of hlist_for_... iterators.
A couple of new helpers - d_first_child() and d_next_sibling(),
to make the expressions less awful.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The prototype was hidden in an #ifdef on x86, which causes a warning:
kernel/irq_work.c:72:13: error: no previous prototype for 'arch_irq_work_raise' [-Werror=missing-prototypes]
Some architectures have a working prototype, while others don't.
Fix this by providing it in only one place that is always visible.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The asm-generic/io.h already has default definition, remove unnecessary
arch's defination.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Brian Cain <bcain@quicinc.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ioremap_uc() is only meaningful on old x86-32 systems with the PAT
extension, and on ia64 with its slightly unconventional ioremap()
behavior. So remove the ioremap_uc() definition in architecutures
other than x86 and ia64. These architectures all have asm-generic/io.h
included and will have the default ioremap_uc() definition which
returns NULL.
This changes the existing behaviour, while no need to worry about
any breakage because in the only callsite of ioremap_uc(), code
has been adjusted to eliminate the impact. Please see
atyfb_setup_generic() of drivers/video/fbdev/aty/atyfb_base.c.
If any new invocation of ioremap_uc() need be added, please consider
using ioremap() intead or adding a ARCH specific version if necessary.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> (SuperH)
Cc: linux-alpha@vger.kernel.org
Cc: linux-hexagon@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This header occasionally gains new function declarations without the
leading extern in accordance with current style rules. Leaving the
legacy externs in place is making the header more difficult to read
over time because of the inconsistency. Remove them.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Add names to rtas_call() parameters]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-7-61847655c51f@linux.ibm.com
|
|
Use scripts/cleanfile to remove instances of trailing space in the
core RTAS code and header.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-6-61847655c51f@linux.ibm.com
|
|
This is a pseries-specific function declaration that doesn't belong in
rtas.h. Move it to the pseries platform code and adjust
pseries/suspend.c accordingly.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-5-61847655c51f@linux.ibm.com
|
|
rtas_service_present() has no more users.
rtas_function_implemented() is now the appropriate API for determining
whether a given RTAS function is available to call.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-4-61847655c51f@linux.ibm.com
|
|
The call_rtas() function has never been a part of arch/powerpc, and
its implementation was removed from arch/ppc by 0a26b1364f14 ("ppc:
Remove CHRP, POWER3 and POWER4 support from arch/ppc").
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-3-61847655c51f@linux.ibm.com
|
|
These functions are only called locally and should be static like the
other corresponding functions are:
arch/powerpc/platforms/powermac/smp.c:416:13: error: no previous prototype for 'smp_psurge_take_timebase' [-Werror=missing-prototypes]
416 | void __init smp_psurge_take_timebase(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/powermac/smp.c:432:13: error: no previous prototype for 'smp_psurge_give_timebase' [-Werror=missing-prototypes]
432 | void __init smp_psurge_give_timebase(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231108125843.3806765-20-arnd@kernel.org
|
|
Allmodconfig builds show a warning about one function that is accidentally
marked global:
arch/powerpc/platforms/pasemi/setup.c:67:6: error: no previous prototype for 'pas_shutdown' [-Werror=missing-prototypes]
Fixes: 656fdf3ad8e0 ("powerpc/pasemi: Add Nemo board device init code.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231108125843.3806765-19-arnd@kernel.org
|
|
Allmodconfig kernels produce a missing-prototypes warning:
arch/powerpc/platforms/ps3/gelic_udbg.c:239:6: error: no previous prototype for 'udbg_shutdown_ps3gelic' [-Werror=missing-prototypes]
Move the declaration from a local header to asm/ps3.h where it can be
seen from both the caller and the definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
[mpe: Drop CONFIG_PS3GELIC_UDBG to fix build error]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231108125843.3806765-18-arnd@kernel.org
|
|
Avoid conflicts, base on fixes.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
