| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Ryan's been hard at work finding and fixing mm bugs in the arm64 code,
so here's a small crop of fixes for -rc5.
The main changes are to fix our zapping of non-present PTEs for
hugetlb entries created using the contiguous bit in the page-table
rather than a block entry at the level above. Prior to these fixes, we
were pulling the contiguous bit back out of the PTE in order to
determine the size of the hugetlb page but this is clearly bogus if
the thing isn't present and consequently both the clearing of the
PTE(s) and the TLB invalidation were unreliable.
Although the problem was found by code inspection, we really don't
want this sitting around waiting to trigger and the changes are CC'd
to stable accordingly.
Note that the diffstat looks a lot worse than it really is;
huge_ptep_get_and_clear() now takes a size argument from the core code
and so all the arch implementations of that have been updated in a
pretty mechanical fashion.
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the
TLB) of hugetlb PTEs constructed using the contiguous bit"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Fix flush_hugetlb_tlb_range() invalidation level
arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes
mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()
arm64/mm: Fix Boot panic on Ampere Altra
|
|
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the huge_pte is being cleared in huge_ptep_get_and_clear().
Provide for this by adding an `unsigned long sz` parameter to the
function. This follows the same pattern as huge_pte_clear() and
set_huge_pte_at().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, loongarch, mips,
parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed
in a separate commit.
Cc: stable@vger.kernel.org
Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Make sure the compare value in the lr/sc loop is sign extended to match
what lr.w does. Fortunately, due to the compiler keeping the register
contents sign extended anyway the lack of the explicit extension didn't
result in wrong code so far, but this cannot be relied upon.
Fixes: b90edb33010b ("RISC-V: Add futex support.")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/mvmfrkv2vhz.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sign extend also an unsigned compare value to match what lr.w is doing.
Otherwise try_cmpxchg may spuriously return true when used on a u32 value
that has the sign bit set, as it happens often in inode_set_ctime_current.
Do this in three conversion steps. The first conversion to long is needed
to avoid a -Wpointer-to-int-cast warning when arch_cmpxchg is used with a
pointer type. Then convert to int and back to long to always sign extend
the 32-bit value to 64-bit.
Fixes: 6c58f25e6938 ("riscv/atomic: Fix sign extension for RV64I")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/mvmed0k4prh.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The PH1520 pinctrl and dwmac drivers are enabeled in defconfig
- A redundant AQRL barrier has been removed from the futex cmpxchg
implementation
- Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them
- Some more page table information is now printed on die() and systems
that cause PA overflows
* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add a warning when physical memory address overflows
riscv/mm/fault: add show_pte() before die()
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
RISC-V: Mark riscv_v_init() as __init
riscv: defconfig: drop RT_GROUP_SCHED=y
riscv/futex: Optimize atomic cmpxchg
riscv: defconfig: enable pinctrl and dwmac support for TH1520
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
|
|
Pull bitmap updates from Yury Norov:
"This includes const_true() series from Vincent Mailhol, another
__always_inline rework from Nathan Chancellor for RISCV, and a couple
of random fixes from Dr. David Alan Gilbert and I Hsin Cheng"
* tag 'bitmap-for-6.14' of https://github.com:/norov/linux:
cpumask: Rephrase comments for cpumask_any*() APIs
cpu: Remove unused init_cpu_online
riscv: Always inline bitops
linux/bits.h: simplify GENMASK_INPUT_CHECK()
compiler.h: add const_true()
|
|
We already have a generic implementation of alloc/free up to P4D level, as
well as pgd_free(). Let's finish the work and add a generic PGD-level
alloc helper as well.
Unlike at lower levels, almost all architectures need some specific magic
at PGD level (typically initialising PGD entries), so introducing a
generic pgd_alloc() isn't worth it. Instead we introduce two new helpers,
__pgd_alloc() and __pgd_free(), and make use of them in the arch-specific
pgd_alloc() and pgd_free() wherever possible. To accommodate as many arch
as possible, __pgd_alloc() takes a page allocation order.
Because pagetable_alloc() allocates zeroed pages, explicit zeroing in
pgd_alloc() becomes redundant and we can get rid of it. Some trivial
implementations of pgd_free() also become unnecessary once __pgd_alloc()
is used; remove them.
Another small improvement is consistent accounting of PGD pages by using
GFP_PGTABLE_{USER,KERNEL} as appropriate.
Not all PGD allocations can be handled by the generic helpers. In
particular, multiple architectures allocate PGDs from a kmem_cache, and
those PGDs may not be page-sized.
Link: https://lkml.kernel.org/r/20250103184415.2744423-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several architectures (arm, arm64, riscv and x86) define exactly the same
__tlb_remove_table(), just introduce generic __tlb_remove_table() to
eliminate these duplications.
The s390 __tlb_remove_table() is nearly the same, so also make s390
__tlb_remove_table() version generic.
Link: https://lkml.kernel.org/r/ea372633d94f4d3f9f56a7ec5994bf050bf77e39.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Acked-by: Arnd Bergmann <arnd@arndb.de> [asm-generic]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move pagetable_dtor() to __tlb_remove_table(), so that ptlock and page
table pages can be freed together (regardless of whether RCU is used).
This prevents the use-after-free problem where the ptlock is freed
immediately but the page table pages is freed later via RCU.
Page tables shouldn't have swap cache, so use pagetable_free() instead of
free_page_and_swap_cache() to free page table pages.
By the way, move the comment above __tlb_remove_table() to
riscv_tlb_remove_ptdesc(), it will be more appropriate.
Link: https://lkml.kernel.org/r/b89d77c965507b1b102cbabe988e69365cb288b6.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The pagetable_p*_dtor() are exactly the same except for the handling of
ptlock. If we make ptlock_free() handle the case where ptdesc->ptl is
NULL and remove VM_BUG_ON_PAGE() from pmd_ptlock_free(), we can unify
pagetable_p*_dtor() into one function. Let's introduce pagetable_dtor()
to do this.
Later, pagetable_dtor() will be moved to tlb_remove_ptdesc(), so that
ptlock and page table pages can be freed together (regardless of whether
RCU is used). This prevents the use-after-free problem where the ptlock
is freed immediately but the page table pages is freed later via RCU.
Link: https://lkml.kernel.org/r/47f44fff9dc68d9d9e9a0d6c036df275f820598a.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Like other levels of page tables, add statistics for P4D level page table.
Link: https://lkml.kernel.org/r/d55fe3c286305aae84457da9e1066df99b3de125.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Four architectures currently implement 5-level pgtables: arm64, riscv, x86
and s390. The first three have essentially the same implementation for
p4d_alloc_one() and p4d_free(), so we've got an opportunity to reduce
duplication like at the lower levels.
Provide a generic version of p4d_alloc_one() and p4d_free(), and make use
of it on those architectures.
Their implementation is the same as at PUD level, except that p4d_free()
performs a runtime check by calling mm_p4d_folded(). 5-level pgtables
depend on a runtime-detected hardware feature on all supported
architectures, so we might as well include this check in the generic
implementation. No runtime check is required in p4d_alloc_one() as the
top-level p4d_alloc() already does the required check.
Link: https://lkml.kernel.org/r/26d69c74a29183ecc335b9b407040d8e4cd70c6a.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [asm-generic]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "move pagetable_*_dtor() to __tlb_remove_table()", v5.
As proposed [1] by Peter Zijlstra below, this patch series aims to move
pagetable_*_dtor() into __tlb_remove_table(). This will cleanup
pagetable_*_dtor() a bit and more gracefully fix the UAF issue [2]
reported by syzbot.
: Notably:
:
: - s390 pud isn't calling the existing pagetable_pud_[cd]tor()
: - none of the p4d things have pagetable_p4d_[cd]tor() (x86,arm64,s390,riscv)
: and they have inconsistent accounting
: - while much of the _ctor calls are in generic code, many of the _dtor
: calls are in arch code for hysterial raisins, this could easily be
: fixed
: - if we fix ptlock_free() to handle NULL, then all the _dtor()
: functions can use it, and we can observe they're all identical
: and can be folded
:
: after all that cleanup, you can move the _dtor from *_free_tlb() into
: tlb_remove_table() -- which for the above case, would then have it called
: from __tlb_remove_table_free().
This patch (of 16):
{pmd,pud,p4d}_alloc_one() is never called if the corresponding page table
level is folded, as {pmd,pud,p4d}_alloc() already does the required check.
We can therefore remove the runtime page table level checks in
{pud,p4d}_alloc_one. The PUD helper becomes equivalent to the generic
version, so we remove it altogether.
This is consistent with the way arm64 and x86 handle this situation
(runtime check in p4d_free() only).
Link: https://lkml.kernel.org/r/cover.1736317725.git.zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/93a1c6bddc0ded9f1a9f15658c1e4af5c93d1194.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- samsung: add gs101-mbox driver
- microchip: add sbi-ipc driver
- zynqmp: fix invalid __percpu annotation
- qcom: add IPQ5424 APCS compatible
- mpfs fix copy and paste bug
- th1520: Fix NULL vs IS_ERR() and a memory corruption bug
- tegra-hsp: clear mailbox before using message
* tag 'mailbox-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
riscv: export __cpuid_to_hartid_map
riscv: sbi: vendorid_list: Add Microchip Technology to the vendor list
mailbox: th1520: Fix memory corruption due to incorrect array size
mailbox: zynqmp: Remove invalid __percpu annotation in zynqmp_ipi_probe()
MAINTAINERS: add entry for Samsung Exynos mailbox driver
mailbox: add Samsung Exynos driver
dt-bindings: mailbox: add google,gs101-mbox
mailbox: qcom: Add support for IPQ5424 APCS IPC
dt-bindings: mailbox: qcom: Add IPQ5424 APCS compatible
mailbox: qcom-ipcc: Reset CLEAR_ON_RECV_RD if set from boot firmware
mailbox: add Microchip IPC support
dt-bindings: mailbox: add binding for Microchip IPC mailbox controller
mailbox: tegra-hsp: Clear mailbox before using message
mailbox: mpfs: fix copy and paste bug in probe
mailbox: th1520: Fix a NULL vs IS_ERR() bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Have fprobes built on top of function graph infrastructure
The fprobe logic is an optimized kprobe that uses ftrace to attach to
functions when a probe is needed at the start or end of the function.
The fprobe and kretprobe logic implements a similar method as the
function graph tracer to trace the end of the function. That is to
hijack the return address and jump to a trampoline to do the trace
when the function exits. To do this, a shadow stack needs to be
created to store the original return address. Fprobes and function
graph do this slightly differently. Fprobes (and kretprobes) has
slots per callsite that are reserved to save the return address. This
is fine when just a few points are traced. But users of fprobes, such
as BPF programs, are starting to add many more locations, and this
method does not scale.
The function graph tracer was created to trace all functions in the
kernel. In order to do this, when function graph tracing is started,
every task gets its own shadow stack to hold the return address that
is going to be traced. The function graph tracer has been updated to
allow multiple users to use its infrastructure. Now have fprobes be
one of those users. This will also allow for the fprobe and kretprobe
methods to trace the return address to become obsolete. With new
technologies like CFI that need to know about these methods of
hijacking the return address, going toward a solution that has only
one method of doing this will make the kernel less complex.
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Remove disabling of interrupts in the function graph tracer
When function graph tracer was first introduced, it could race with
interrupts and NMIs. To prevent that race, it would disable
interrupts and not trace NMIs. But the code has changed to allow NMIs
and also interrupts. This change was done a long time ago, but the
disabling of interrupts was never removed. Remove the disabling of
interrupts in the function graph tracer is it is not needed. This
greatly improves its performance.
- Allow the :mod: command to enable tracing module functions on the
kernel command line.
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Because enabling function tracing can be done very early at boot up
(before scheduling is enabled), the commands that can be done when
function tracing is started is limited. Having the ":mod:" command to
trace module functions as they are loaded is very useful. Update the
kernel command line function filtering to allow it.
* tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ftrace: Implement :mod: cache filtering on kernel command line
tracing: Adopt __free() and guard() for trace_fprobe.c
bpf: Use ftrace_get_symaddr() for kprobe_multi probes
ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr
Documentation: probes: Update fprobe on function-graph tracer
selftests/ftrace: Add a test case for repeating register/unregister fprobe
selftests: ftrace: Remove obsolate maxactive syntax check
tracing/fprobe: Remove nr_maxactive from fprobe
fprobe: Add fprobe_header encoding feature
fprobe: Rewrite fprobe on function-graph tracer
s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC
ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC
bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled
tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS
tracing: Add ftrace_fill_perf_regs() for perf event
tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs
fprobe: Use ftrace_regs in fprobe exit handler
fprobe: Use ftrace_regs in fprobe entry handler
fgraph: Pass ftrace_regs to retfunc
fgraph: Replace fgraph_ret_regs with ftrace_regs
...
|
|
Add Microchip Technology to the RISC-V vendor list.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
KVM/riscv changes for 6.14
- Svvptc, Zabha, and Ziccrse extension support for Guest/VM
- Virtualize SBI system suspend extension for Guest/VM
- Trap related exit statstics as SBI PMU firmware counters for Guest/VM
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
xtheadvector is a custom extension that is based upon riscv vector
version 0.7.1 [1]. All of the vector routines have been modified to
support this alternative vector version based upon whether xtheadvector
was determined to be supported at boot.
vlenb is not supported on the existing xtheadvector hardware, so a
devicetree property thead,vlenb is added to provide the vlenb to Linux.
There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is
used to request which thead vendor extensions are supported on the
current platform. This allows future vendors to allocate hwprobe keys
for their vendor.
Support for xtheadvector is also added to the vector kselftests.
[1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361c61d335e03d3134b14133f/xtheadvector.adoc
* b4-shazam-merge:
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-0-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Follow the patterns of the other architectures that use
GENERIC_CPU_VULNERABILITIES for riscv to introduce the ghostwrite
vulnerability and mitigation. The mitigation is to disable all vector
which is accomplished by clearing the bit from the cpufeature field.
Ghostwrite only affects thead c9xx CPUs that impelment xtheadvector, so
the vulerability will only be mitigated on these CPUs.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-14-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a new hwprobe key "RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0" which
allows userspace to probe for the new RISCV_ISA_VENDOR_EXT_XTHEADVECTOR
vendor extension.
This new key will allow userspace code to probe for which thead vendor
extensions are supported. This API is modeled to be consistent with
RISCV_HWPROBE_KEY_IMA_EXT_0. The bitmask returned will have each bit
corresponding to a supported thead vendor extension of the cpumask set.
Just like RISCV_HWPROBE_KEY_IMA_EXT_0, this allows a userspace program
to determine all of the supported thead vendor extensions in one call.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-10-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Use alternatives to add support for xtheadvector vector save/restore
routines.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-9-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
xtheadvector uses different encodings than standard vector for
vsetvli and vector loads/stores. Write the instruction formats to be
used in assembly code.
Co-developed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-8-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The VXRM vector csr for xtheadvector has an encoding of 0xa and VXSAT
has an encoding of 0x9.
Co-developed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-7-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The VCSR CSR contains two elements VXRM[2:1] and VXSAT[0].
Define constants for those to access the elements in a readable way.
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-6-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If thead,vlenb is provided in the device tree, prefer that over reading
the vlenb csr.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-5-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add support to the kernel for THead vendor extensions with the target of
the new extension xtheadvector.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-4-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.14
1. Clear LLBCTL if secondary mmu mapping changed.
2. Add hypercall service support for usermode VMM.
This is a really small changeset, because the Chinese New Year
(Spring Festival) is coming. Happy New Year!
|
|
Atish Patra <atishp@rivosinc.com> says:
Here are two minor improvement/fixes in the PMU event path. The first patch
was part of the series[1]. The 2nd patch was suggested during the series
review.
While the series can only be merged once SBI v3.0 is frozen, these two
patches can be independent of SBI v3.0 and can be merged sooner. Hence, these
two patches are sent as a separate series.
* b4-shazam-merge:
drivers/perf: riscv: Do not allow invalid raw event config
drivers/perf: riscv: Return error for default case
drivers/perf: riscv: Fix Platform firmware event data
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-0-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Platform firmware event data field is allowed to be 62 bits for
Linux as uppper most two bits are reserved to indicate SBI fw or
platform specific firmware events.
However, the event data field is masked as per the hardware raw
event mask which is not correct.
Fix the platform firmware event data field with proper mask.
Fixes: f0c9363db2dd ("perf/riscv-sbi: Add platform specific firmware event handling")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-1-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When CONFIG_RISCV_QUEUED_SPINLOCKS=y, the _Q_PENDING_LOOPS
definition is missing. Add the _Q_PENDING_LOOPS definition for
pure qspinlock usage.
Fixes: ab83647fadae ("riscv: Add qspinlock support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241215135252.201983-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In sparse vmemmap model, the virtual address of vmemmap is calculated as:
((struct page *)VMEMMAP_START - (phys_ram_base >> PAGE_SHIFT)).
And the struct page's va can be calculated with an offset:
(vmemmap + (pfn)).
However, when initializing struct pages, kernel actually starts from the
first page from the same section that phys_ram_base belongs to. If the
first page's physical address is not (phys_ram_base >> PAGE_SHIFT), then
we get an va below VMEMMAP_START when calculating va for it's struct page.
For example, if phys_ram_base starts from 0x82000000 with pfn 0x82000, the
first page in the same section is actually pfn 0x80000. During
init_unavailable_range(), we will initialize struct page for pfn 0x80000
with virtual address ((struct page *)VMEMMAP_START - 0x2000), which is
below VMEMMAP_START as well as PCI_IO_END.
This commit fixes this bug by introducing a new variable
'vmemmap_start_pfn' which is aligned with memory section size and using
it to calculate vmemmap address instead of phys_ram_base.
Fixes: a11dd49dcb93 ("riscv: Sparse-Memory/vmemmap out-of-bounds fix")
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20241209122617.53341-1-luxu.kernel@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When building allmodconfig + ThinLTO with certain versions of clang,
arch_set_bit() may not be inlined, resulting in a modpost warning:
WARNING: modpost: vmlinux: section mismatch in reference: arch_set_bit+0x58 (section: .text.arch_set_bit) -> numa_nodes_parsed (section: .init.data)
acpi_numa_rintc_affinity_init() calls arch_set_bit() via __node_set()
with numa_nodes_parsed, which is marked as __initdata. If arch_set_bit()
is not inlined, modpost will flag that it is being called with data that
will be freed after init.
As acpi_numa_rintc_affinity_init() is marked as __init, there is not
actually a functional issue here. However, the bitop functions should be
marked as __always_inline, so that they work consistently for init and
non-init code, which the comment in include/linux/nodemask.h alludes to.
This matches s390 and x86's implementations.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Currently, kvm doesn't delegate the few traps such as misaligned
load/store, illegal instruction and load/store access faults because it
is not expected to occur in the guest very frequently. Thus, kvm gets a
chance to act upon it or collect statistics about it before redirecting
the traps to the guest.
Collect both guest and host visible statistics during the traps.
Enable them so that both guest and host can collect the stats about
them if required.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241224-kvm_guest_stat-v2-3-08a77ac36b02@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Ziccrse extension for Guest/VM.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/d10e746d165074174f830aa3d89bf3c92017acee.1732854096.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zabha extension for Guest/VM.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/4074feb27819e23bab05b0fd6441a38bf0b6a5e2.1732854096.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Svvptc extension for Guest/VM.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/133509ffe5783b62cf95e8f675cc3e327bee402e.1732854096.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Implement a KVM SBI SUSP extension handler. The handler only
validates the system suspend entry criteria and prepares for resuming
in the appropriate state at the resume_addr (as specified by the SBI
spec), but then it forwards the call to the VMM where any system
suspend behavior may be implemented. Since VMM support is needed, KVM
disables the extension by default.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241017074538.18867-5-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Fprobe store its data structure address and size on the fgraph return stack
by __fprobe_header. But most 64bit architecture can combine those to
one unsigned long value because 4 MSB in the kernel address are the same.
With this encoding, fprobe can consume less space on ret_stack.
This introduces asm/fprobe.h to define arch dependent encode/decode
macros. Note that since fprobe depends on CONFIG_HAVE_FUNCTION_GRAPH_FREGS,
currently only arm64, loongarch, riscv, s390 and x86 are supported.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173519005783.391279.5307910947400277525.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Rewrite fprobe implementation on function-graph tracer.
Major API changes are:
- 'nr_maxactive' field is deprecated.
- This depends on CONFIG_DYNAMIC_FTRACE_WITH_ARGS or
!CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS, and
CONFIG_HAVE_FUNCTION_GRAPH_FREGS. So currently works only
on x86_64.
- Currently the entry size is limited in 15 * sizeof(long).
- If there is too many fprobe exit handler set on the same
function, it will fail to probe.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/173519003970.391279.14406792285453830996.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add ftrace_partial_regs() which converts the ftrace_regs to pt_regs.
This is for the eBPF which needs this to keep the same pt_regs interface
to access registers.
Thus when replacing the pt_regs with ftrace_regs in fprobes (which is
used by kprobe_multi eBPF event), this will be used.
If the architecture defines its own ftrace_regs, this copies partial
registers to pt_regs and returns it. If not, ftrace_regs is the same as
pt_regs and ftrace_partial_regs() will return ftrace_regs::regs.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Florent Revest <revest@chromium.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Link: https://lore.kernel.org/173518996761.391279.4987911298206448122.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Use ftrace_regs instead of fgraph_ret_regs for tracing return value
on function_graph tracer because of simplifying the callback interface.
The CONFIG_HAVE_FUNCTION_GRAPH_RETVAL is also replaced by
CONFIG_HAVE_FUNCTION_GRAPH_FREGS.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173518991508.391279.16635322774382197642.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
into HEAD
KVM selftests "tree"-wide changes for 6.14:
- Rework vcpu_get_reg() to return a value instead of using an out-param, and
update all affected arch code accordingly.
- Convert the max_guest_memory_test into a more generic mmu_stress_test.
The basic gist of the "conversion" is to have the test do mprotect() on
guest memory while vCPUs are accessing said memory, e.g. to verify KVM
and mmu_notifiers are working as intended.
- Play nice with treewrite builds of unsupported architectures, e.g. arm
(32-bit), as KVM selftests' Makefile doesn't do anything to ensure the
target architecture is actually one KVM selftests supports.
- Use the kernel's $(ARCH) definition instead of the target triple for arch
specific directories, e.g. arm64 instead of aarch64, mainly so as not to
be different from the rest of the kernel.
|
|
Define KVM_REG_SIZE() in the common kvm.h header, and delete the arm64 and
RISC-V versions. As evidenced by the surrounding definitions, all aspects
of the register size encoding are generic, i.e. RISC-V should have moved
arm64's definition to common code instead of copy+pasting.
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
flush_tlb_kernel_range() may use IPIs to flush the TLBs of all the
cores, which triggers the following warning when the irqs are disabled:
[ 3.455330] WARNING: CPU: 1 PID: 0 at kernel/smp.c:815 smp_call_function_many_cond+0x452/0x520
[ 3.456647] Modules linked in:
[ 3.457218] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7-00010-g91d3de7240b8 #1
[ 3.457416] Hardware name: QEMU QEMU Virtual Machine, BIOS
[ 3.457633] epc : smp_call_function_many_cond+0x452/0x520
[ 3.457736] ra : on_each_cpu_cond_mask+0x1e/0x30
[ 3.457786] epc : ffffffff800b669a ra : ffffffff800b67c2 sp : ff2000000000bb50
[ 3.457824] gp : ffffffff815212b8 tp : ff6000008014f080 t0 : 000000000000003f
[ 3.457859] t1 : ffffffff815221e0 t2 : 000000000000000f s0 : ff2000000000bc10
[ 3.457920] s1 : 0000000000000040 a0 : ffffffff815221e0 a1 : 0000000000000001
[ 3.457953] a2 : 0000000000010000 a3 : 0000000000000003 a4 : 0000000000000000
[ 3.458006] a5 : 0000000000000000 a6 : ffffffffffffffff a7 : 0000000000000000
[ 3.458042] s2 : ffffffff815223be s3 : 00fffffffffff000 s4 : ff600001ffe38fc0
[ 3.458076] s5 : ff600001ff950d00 s6 : 0000000200000120 s7 : 0000000000000001
[ 3.458109] s8 : 0000000000000001 s9 : ff60000080841ef0 s10: 0000000000000001
[ 3.458141] s11: ffffffff81524812 t3 : 0000000000000001 t4 : ff60000080092bc0
[ 3.458172] t5 : 0000000000000000 t6 : ff200000000236d0
[ 3.458203] status: 0000000200000100 badaddr: ffffffff800b669a cause: 0000000000000003
[ 3.458373] [<ffffffff800b669a>] smp_call_function_many_cond+0x452/0x520
[ 3.458593] [<ffffffff800b67c2>] on_each_cpu_cond_mask+0x1e/0x30
[ 3.458625] [<ffffffff8000e4ca>] __flush_tlb_range+0x118/0x1ca
[ 3.458656] [<ffffffff8000e6b2>] flush_tlb_kernel_range+0x1e/0x26
[ 3.458683] [<ffffffff801ea56a>] kfence_protect+0xc0/0xce
[ 3.458717] [<ffffffff801e9456>] kfence_guarded_free+0xc6/0x1c0
[ 3.458742] [<ffffffff801e9d6c>] __kfence_free+0x62/0xc6
[ 3.458764] [<ffffffff801c57d8>] kfree+0x106/0x32c
[ 3.458786] [<ffffffff80588cf2>] detach_buf_split+0x188/0x1a8
[ 3.458816] [<ffffffff8058708c>] virtqueue_get_buf_ctx+0xb6/0x1f6
[ 3.458839] [<ffffffff805871da>] virtqueue_get_buf+0xe/0x16
[ 3.458880] [<ffffffff80613d6a>] virtblk_done+0x5c/0xe2
[ 3.458908] [<ffffffff8058766e>] vring_interrupt+0x6a/0x74
[ 3.458930] [<ffffffff800747d8>] __handle_irq_event_percpu+0x7c/0xe2
[ 3.458956] [<ffffffff800748f0>] handle_irq_event+0x3c/0x86
[ 3.458978] [<ffffffff800786cc>] handle_simple_irq+0x9e/0xbe
[ 3.459004] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a
[ 3.459027] [<ffffffff804bf87c>] imsic_handle_irq+0xba/0x120
[ 3.459056] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a
[ 3.459080] [<ffffffff804bdb76>] riscv_intc_aia_irq+0x24/0x34
[ 3.459103] [<ffffffff809d0452>] handle_riscv_irq+0x2e/0x4c
[ 3.459133] [<ffffffff809d923e>] call_on_irq_stack+0x32/0x40
So only flush the local TLB and let the lazy kfence page fault handling
deal with the faults which could happen when a core has an old protected
pte version cached in its TLB. That leads to potential inaccuracies which
can be tolerated when using kfence.
Fixes: 47513f243b45 ("riscv: Enable KFENCE for riscv64")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241209074125.52322-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Remove redundant release/acquire barriers, optimizing the lr/sc sequence
to provide conditional RCsc synchronization, per the RVWMO.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20241113183321.491113-1-dave@stgolabs.net
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull more kvm updates from Paolo Bonzini:
- ARM fixes
- RISC-V Svade and Svadu (accessed and dirty bit) extension support for
host and guest
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test
RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM
dt-bindings: riscv: Add Svade and Svadu Entries
RISC-V: Add Svade and Svadu Extensions Support
KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status
KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure
KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes
KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition
KVM: arm64: vgic: Make vgic_get_irq() more robust
KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-v updates from Palmer Dabbelt:
- Support for pointer masking in userspace
- Support for probing vector misaligned access performance
- Support for qspinlock on systems with Zacas and Zabha
* tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
RISC-V: Remove unnecessary include from compat.h
riscv: Fix default misaligned access trap
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
...
|
|
KVM/riscv changes for 6.13 part #2
- Svade and Svadu extension support for Host and Guest/VM
|
