| Age | Commit message (Collapse) | Author |
|---|
|
The macro GET_RM defined twice in this file, one can be removed.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241008094141.549248-3-zhangchunyan@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The macro is not used in the current version of kernel, it looks like
can be removed to avoid a build warning:
../arch/riscv/kernel/asm-offsets.c: At top level:
../arch/riscv/kernel/asm-offsets.c:7: warning: macro "GENERATING_ASM_OFFSETS" is not used [-Wunused-macros]
7 | #define GENERATING_ASM_OFFSETS
Fixes: 9639a44394b9 ("RISC-V: Provide a cleaner raw_smp_processor_id()")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20241008094141.549248-2-zhangchunyan@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
'cpu' is an unsigned integer, so its conversion specifier should
be %u, not %d.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/all/alpine.DEB.2.21.2409122309090.40372@angie.orcam.me.uk/
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: f1e58583b9c7 ("RISC-V: Support cpu hotplug")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4C127DEECDA287C8+20241017032010.96772-1-wangyuli@uniontech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When populating cache leaves we previously fetched the CPU device node
at the very beginning. But when ACPI is enabled we go through a
specific branch which returns early and does not call 'of_node_put' for
the node that was acquired.
Since we are not using a CPU device node for the ACPI code anyways, we
can simply move the initialization of it just passed the ACPI block, and
we are guaranteed to have an 'of_node_put' call for the acquired node.
This prevents a bad reference count of the CPU device node.
Moreover, the previous function did not check for errors when acquiring
the device node, so a return -ENOENT has been added for that case.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 604f32ea6909 ("riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240913080053.36636-1-mikisabate@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The IMAGE_DLLCHARACTERISTICS_NX_COMPAT informs the firmware that the
EFI binary does not rely on pages that are both executable and
writable.
The flag is used by some distro versions of GRUB to decide if the EFI
binary may be executed.
As the Linux kernel neither has RWX sections nor needs RWX pages for
relocation we should set the flag.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Fixes: cb7d2dd5612a ("RISC-V: Add PE/COFF header for EFI stub")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240929140233.211800-1-heinrich.schuchardt@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Early code designates the code executed when the MMU is not yet enabled,
and this comes with some limitations (see
Documentation/arch/riscv/boot.rst, section "Pre-MMU execution").
FORTIFY_SOURCE must be disabled then since it can trigger kernel panics
as reported in [1].
Reported-by: Jason Montleon <jmontleo@redhat.com>
Closes: https://lore.kernel.org/linux-riscv/CAJD_bPJes4QhmXY5f63GHV9B9HFkSCoaZjk-qCT2NGS7Q9HODg@mail.gmail.com/ [1]
Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head")
Fixes: 26e7aacb83df ("riscv: Allow to downgrade paging mode from the command line")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241009072749.45006-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When SVPBMT is enabled, __acpi_map_table() will directly access the
data in DDR through the IO attribute, rather than through hardware
cache consistency, resulting in incorrect data in the obtained ACPI
table.
The log: ACPI: [ACPI:0x18] Invalid zero length.
We do not assume whether the bootloader flushes or not. We should
access in a cacheable way instead of maintaining cache consistency
by software.
Fixes: 3b426d4b5b14 ("RISC-V: ACPI : Fix for usage of pointers in different address space")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20241014130141.86426-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Samuel Holland <samuel.holland@sifive.com> says:
RISC-V defines three extensions for pointer masking[1]:
- Smmpm: configured in M-mode, affects M-mode
- Smnpm: configured in M-mode, affects the next lower mode (S or U-mode)
- Ssnpm: configured in S-mode, affects the next lower mode (VS, VU, or U-mode)
This series adds support for configuring Smnpm or Ssnpm (depending on
which privilege mode the kernel is running in) to allow pointer masking
in userspace (VU or U-mode), extending the PR_SET_TAGGED_ADDR_CTRL API
from arm64. Unlike arm64 TBI, userspace pointer masking is not enabled
by default on RISC-V. Additionally, the tag width (referred to as PMLEN)
is variable, so userspace needs to ask the kernel for a specific tag
width, which is interpreted as a lower bound on the number of tag bits.
This series also adds support for a tagged address ABI similar to arm64
and x86. Since accesses from the kernel to user memory use the kernel's
pointer masking configuration, not the user's, the kernel must untag
user pointers in software before dereferencing them. And since the tag
width is variable, as with LAM on x86, it must be kept the same across
all threads in a process so untagged_addr_remote() can work.
[1]: https://github.com/riscv/riscv-j-extension/raw/d70011dde6c2/zjpm-spec.pdf
* b4-shazam-merge:
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
riscv: Add support for the tagged address ABI
riscv: Add support for userspace pointer masking
riscv: Add CSR definitions for pointer masking
riscv: Add ISA extension parsing for pointer masking
dt-bindings: riscv: Add pointer masking ISA extensions
Link: https://lore.kernel.org/r/20241016202814.4061541-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Supm is a virtual ISA extension defined in the RISC-V Pointer Masking
specification, which indicates that pointer masking is available in
U-mode. It can be provided by either Smnpm or Ssnpm, depending on which
mode the kernel runs in. Userspace should not care about this
distinction, so export Supm instead of either underlying extension.
Hide the extension if the kernel was compiled without support for the
pointer masking prctl() interface.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-9-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This allows a tracer to control the ABI of the tracee, as on arm64.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-7-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When pointer masking is enabled for userspace, the kernel can accept
tagged pointers as arguments to some system calls. Allow this by
untagging the pointers in access_ok() and the uaccess routines. The
uaccess routines must peform untagging in software because U-mode and
S-mode have entirely separate pointer masking configurations. In fact,
hardware may not even implement pointer masking for S-mode.
Since the number of tag bits is variable, untagged_addr_remote() needs
to know what PMLEN to use for the remote mm. Therefore, the pointer
masking mode must be the same for all threads sharing an mm. Enforce
this with a lock flag in the mm context, as x86 does for LAM. The flag
gets reset in init_new_context() during fork(), as the new mm is no
longer multithreaded.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-6-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISC-V supports pointer masking with a variable number of tag bits
(which is called "PMLEN" in the specification) and which is configured
at the next higher privilege level.
Wire up the PR_SET_TAGGED_ADDR_CTRL and PR_GET_TAGGED_ADDR_CTRL prctls
so userspace can request a lower bound on the number of tag bits and
determine the actual number of tag bits. As with arm64's
PR_TAGGED_ADDR_ENABLE, the pointer masking configuration is
thread-scoped, inherited on clone() and fork() and cleared on execve().
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-5-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The RISC-V Pointer Masking specification defines three extensions:
Smmpm, Smnpm, and Ssnpm. Add support for parsing each of them. The
specific extension which provides pointer masking support to userspace
(Supm) depends on the kernel's privilege mode, so provide a macro to
abstract this selection.
Smmpm implies the existence of the mseccfg CSR. As it is the only user
of this CSR so far, there is no need for an Xlinuxmseccfg extension.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The first is a fix and the second a check to make sure we don't
regress on the relocations, so I'm picking this up as a series to get
the fix into fixes.
* b4-shazam-merge:
riscv: Check that vdso does not contain any dynamic relocations
riscv: vdso: Prevent the compiler from inserting calls to memset()
Link: https://lore.kernel.org/r/20241016083625.136311-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Like other architectures, use the common cmd_vdso_check to make sure of
that.
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20241016083625.136311-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The compiler is smart enough to insert a call to memset() in
riscv_vdso_get_cpus(), which generates a dynamic relocation.
So prevent this by using -fno-builtin option.
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20241016083625.136311-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
accesses"
Charlie Jenkins <charlie@rivosinc.com> says:
Adds support for detecting and reporting the speed of unaligned vector
accesses on RISC-V CPUs. Adds vec_misaligned_speed key to the hwprobe
adds Zicclsm to cpufeature and fixes the check for scalar unaligned
emulated all CPUs. The vec_misaligned_speed key keeps the same format
as the scalar unaligned access speed key.
This set does not emulate unaligned vector accesses on CPUs that do not
support them. Only reports if userspace can run them and speed of
unaligned vector accesses if supported.
* b4-shazam-merge:
RISC-V: hwprobe: Document unaligned vector perf key
RISC-V: Report vector unaligned access speed hwprobe
RISC-V: Detect unaligned vector accesses supported
RISC-V: Replace RISCV_MISALIGNED with RISCV_SCALAR_MISALIGNED
RISC-V: Scalar unaligned access emulated on hotplug CPUs
RISC-V: Check scalar unaligned access on all CPUs
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-0-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Detect if vector misaligned accesses are faster or slower than
equivalent vector byte accesses. This is useful for usermode to know
whether vector byte accesses or vector misaligned accesses have a better
bandwidth for operations like memcpy.
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-5-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Run an unaligned vector access to test if the system supports
vector unaligned access. Add the result to a new key in hwprobe.
This is useful for usermode to know if vector misaligned accesses are
supported and if they are faster or slower than equivalent byte accesses.
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-4-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Replace RISCV_MISALIGNED with RISCV_SCALAR_MISALIGNED to allow
for the addition of RISCV_VECTOR_MISALIGNED in a later patch.
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-3-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The check_unaligned_access_emulated() function should have been called
during CPU hotplug to ensure that if all CPUs had emulated unaligned
accesses, the new CPU also does.
This patch adds the call to check_unaligned_access_emulated() in
the hotplug path.
Fixes: 55e0bf49a0d0 ("RISC-V: Probe misaligned access speed in parallel")
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-2-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Originally, the check_unaligned_access_emulated_all_cpus function
only checked the boot hart. This fixes the function to check all
harts.
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-1-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Now that the [ms]envcfg CSR value is maintained per thread, not per
hart, riscv_user_isa_enable() only needs to be called once during boot,
to set the value for the init task. This also allows it to be marked as
__init.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240814081126.956287-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Some bits in the [ms]envcfg CSR, such as the CFI state and pointer
masking mode, need to be controlled on a per-thread basis. Support this
by keeping a copy of the CSR value in struct thread_struct and writing
it during context switches. It is safe to discard the old CSR value
during the context switch because the CSR is modified only by software,
so the CSR will remain in sync with the copy in thread_struct.
Use ALTERNATIVE directly instead of riscv_has_extension_unlikely() to
minimize branchiness in the context switching code.
Since thread_struct is copied during fork(), setting the value for the
init task sets the default value for all other threads.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240814081126.956287-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, we enable cbo.zero for usermode on each hart that supports
the Zicboz extension. This means that the [ms]envcfg CSR value may
differ between harts. Other features, such as pointer masking and CFI,
require setting [ms]envcfg bits on a per-thread basis. The combination
of these two adds quite some complexity and overhead to context
switching, as we would need to maintain two separate masks for the
per-hart and per-thread bits. Andrew Jones, who originally added Zicboz
support, writes[1][2]:
I've approached Zicboz the same way I would approach all
extensions, which is to be per-hart. I'm not currently aware of
a platform that is / will be composed of harts where some have
Zicboz and others don't, but there's nothing stopping a platform
like that from being built.
So, how about we add code that confirms Zicboz is on all harts.
If any hart does not have it, then we complain loudly and disable
it on all the other harts. If it was just a hardware description
bug, then it'll get fixed. If there's actually a platform which
doesn't have Zicboz on all harts, then, when the issue is reported,
we can decide to not support it, support it with defconfig, or
support it under a Kconfig guard which must be enabled by the user.
Let's follow his suggested solution and require the extension to be
available on all harts, so the envcfg CSR value does not need to change
when a thread migrates between harts. Since we are doing this for all
extensions with fields in envcfg, the CSR itself only needs to be saved/
restored when it is present on all harts.
This should not be a regression as no known hardware has asymmetric
Zicboz support, but if anyone reports seeing the warning, we will
re-evaluate our solution.
Link: https://lore.kernel.org/linux-riscv/20240322-168f191eeb8479b2ea169a5e@orel/ [1]
Link: https://lore.kernel.org/linux-riscv/20240323-28943722feb57a41fb0ff488@orel/ [2]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240814081126.956287-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support using Zkr to seed KASLR
- Support IPI-triggered CPU backtracing
- Support for generic CPU vulnerabilities reporting to userspace
- A few cleanups for missing licenses
- The size limit on the XIP kernel has been removed
- Support for tracing userspace stacks
- Support for the Svvptc extension
- Various cleanups and fixes throughout the tree
* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
crash: Fix riscv64 crash memory reserve dead loop
perf/riscv-sbi: Add platform specific firmware event handling
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
ACPI: RISCV: Make acpi_numa_get_nid() to be static
riscv: Randomize lower bits of stack address
selftests: riscv: Allow mmap test to compile on 32-bit
riscv: Make riscv_isa_vendor_ext_andes array static
riscv: Use LIST_HEAD() to simplify code
riscv: defconfig: Disable RZ/Five peripheral support
RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
riscv: avoid Imbalance in RAS
riscv: cacheinfo: Add back init_cache_level() function
riscv: Remove unused _TIF_WORK_MASK
drivers/perf: riscv: Remove redundant macro check
riscv: define ILLEGAL_POINTER_VALUE for 64bit
...
|
|
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> (arm64 platform)
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240729035958.1957185-1-haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Samuel Holland <samuel.holland@sifive.com> says:
This series fixes two areas where uninstrumented assembly routines
caused gaps in KASAN coverage on RISC-V, which were caught by KUnit
tests. The KASAN KUnit test suite passes after applying this series.
This series fixes the following test failures:
# kasan_strings: EXPECTATION FAILED at mm/kasan/kasan_test.c:1520
KASAN failure expected in "kasan_int_result = strcmp(ptr, "2")", but none occurred
# kasan_strings: EXPECTATION FAILED at mm/kasan/kasan_test.c:1524
KASAN failure expected in "kasan_int_result = strlen(ptr)", but none occurred
not ok 60 kasan_strings
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1531
KASAN failure expected in "set_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1533
KASAN failure expected in "clear_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1535
KASAN failure expected in "clear_bit_unlock(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1536
KASAN failure expected in "__clear_bit_unlock(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1537
KASAN failure expected in "change_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1543
KASAN failure expected in "test_and_set_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1545
KASAN failure expected in "test_and_set_bit_lock(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1546
KASAN failure expected in "test_and_clear_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1548
KASAN failure expected in "test_and_change_bit(nr, addr)", but none occurred
not ok 61 kasan_bitops_generic
Samuel Holland (2):
riscv: Omit optimized string routines when using KASAN
riscv: Enable bitops instrumentation
arch/riscv/include/asm/bitops.h | 43 ++++++++++++++++++---------------
arch/riscv/include/asm/string.h | 2 ++
arch/riscv/kernel/riscv_ksyms.c | 3 ---
arch/riscv/lib/Makefile | 2 ++
arch/riscv/lib/strcmp.S | 1 +
arch/riscv/lib/strlen.S | 1 +
arch/riscv/lib/strncmp.S | 1 +
arch/riscv/purgatory/Makefile | 2 ++
8 files changed, 32 insertions(+), 23 deletions(-)
* b4-shazam-merge:
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
Link: https://lore.kernel.org/r/20240801033725.28816-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The optimized string routines are implemented in assembly, so they are
not instrumented for use with KASAN. Fall back to the C version of the
routines in order to improve KASAN coverage. This fixes the
kasan_strings() unit test.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240801033725.28816-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
acpi_numa_get_nid() is only called in acpi_numa.c for riscv,
no need to add it in head file, so make it static and remove
related functions in the asm/acpi.h.
Spotted by doing some cleanup for arm64 ACPI.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Link: https://lore.kernel.org/r/20240811031804.3347298-1-guohanjun@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Implement arch_align_stack() to randomize the lower bits
of the stack address.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240625030502.68988-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since this array is only used in this file, it should be static.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407241530.ej5SVgX1-lkp@intel.com/
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240807-make_andes_static-v1-1-b64bf4c3d941@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240904013344.2026738-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Until now, the generic weak kgdb_roundup_cpus() has been used for kgdb on
RISCV. A custom one allows to debug CPUs that are stuck with interrupts
disabled with NMI support in the future. And using an IPI is better than
the generic one since it avoids the potential situation described in the
generic kgdb_call_nmi_hook(). As Andrew pointed out, once there is NMI
support, we can easily extend this and the CPU backtrace support
to use NMIs.
After this patch, the kgdb test show that:
# echo g > /proc/sysrq-trigger
[2]kdb> btc
btc: cpu status: Currently on cpu 2
Available cpus: 0-1(-), 2, 3(-)
Stack traceback for pid 0
0xffffffff81c13a40 0 0 1 0 - 0xffffffff81c14510 swapper/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-g3120273055b6-dirty #51
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80006c48>] dump_backtrace+0x28/0x30
[<ffffffff80fceb38>] show_stack+0x38/0x44
[<ffffffff80fe6a04>] dump_stack_lvl+0x58/0x7a
[<ffffffff80fe6a3e>] dump_stack+0x18/0x20
[<ffffffff801143fa>] kgdb_cpu_enter+0x682/0x6b2
[<ffffffff801144ca>] kgdb_nmicallback+0xa0/0xac
[<ffffffff8000a392>] handle_IPI+0x9c/0x120
[<ffffffff800a2baa>] handle_percpu_devid_irq+0xa4/0x1e4
[<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
[<ffffffff800a9e5c>] ipi_mux_process+0xe8/0x110
[<ffffffff806e1e30>] imsic_handle_irq+0xf8/0x13a
[<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
[<ffffffff806dff12>] riscv_intc_aia_irq+0x2e/0x40
[<ffffffff80fe6ab0>] handle_riscv_irq+0x54/0x86
[<ffffffff80ff2e4a>] call_on_irq_stack+0x32/0x40
Rebased on Ryo Takakura's "RISC-V: Enable IPI CPU Backtrace" patch.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240727063438.886155-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Inspired by[1], modify the code to remove the code of modifying ra to
avoid imbalance RAS (return address stack) which may lead to incorret
predictions on return.
Link: https://lore.kernel.org/linux-riscv/20240607061335.2197383-1-cyrilbur@tenstorrent.com/ [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Cyril Bur <cyrilbur@tenstorrent.com>
Link: https://lore.kernel.org/r/20240720170659.1522-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
In RISC-V, after a new mapping is established, a sfence.vma needs to be
emitted for different reasons:
- if the uarch caches invalid entries, we need to invalidate it otherwise
we would trap on this invalid entry,
- if the uarch does not cache invalid entries, a reordered access could fail
to see the new mapping and then trap (sfence.vma acts as a fence).
We can actually avoid emitting those (mostly) useless and costly sfence.vma
by handling the traps instead:
- for new kernel mappings: only vmalloc mappings need to be taken care of,
other new mapping are rare and already emit the required sfence.vma if
needed.
That must be achieved very early in the exception path as explained in
patch 3, and this also fixes our fragile way of dealing with vmalloc faults.
- for new user mappings: Svvptc makes update_mmu_cache() a no-op but we can
take some gratuitous page faults (which are very unlikely though).
Patch 1 and 2 introduce Svvptc extension probing.
On our uarch that does not cache invalid entries and a 6.5 kernel, the
gains are measurable:
* Kernel boot: 6%
* ltp - mmapstress01: 8%
* lmbench - lat_pagefault: 20%
* lmbench - lat_mmap: 5%
Here are the corresponding numbers of sfence.vma emitted:
* Ubuntu boot to login:
Before: ~630k sfence.vma
After: ~200k sfence.vma
* ltp - mmapstress01
Before: ~45k
After: ~6.3k
* lmbench - lat_pagefault
Before: ~665k
After: 832 (!)
* lmbench - lat_mmap
Before: ~546k
After: 718 (!)
Thanks to Ved and Matt Evans for triggering the discussion that led to
this patchset!
* b4-shazam-merge:
riscv: Stop emitting preventive sfence.vma for new userspace mappings with Svvptc
riscv: Stop emitting preventive sfence.vma for new vmalloc mappings
dt-bindings: riscv: Add Svvptc ISA extension description
riscv: Add ISA extension parsing for Svvptc
Link: https://lore.kernel.org/r/20240717060125.139416-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
commit 5944ce092b97 (arch_topology: Build cacheinfo from primary CPU)
removed the init_cache_level() function from arch/riscv/kernel/cacheinfo.c
and relies on the init_cpu_topology() function in drivers/base/arch_topology.c
to call fetch_cache_info() which in turn calls init_of_cache_level() to
populate the cache hierarchy information. However, init_cpu_topology() is only
called from smpboot.c:smp_prepare_cpus() and thus only available when
CONFIG_SMP is defined.
To support non-SMP enabled kernels to still detect cache hierarchy, we add back
the init_cache_level() function. The init_level_allocate_ci() function handles
this gracefully on SMP-enabled kernels anyway where fetch_cache_info() is
called from init_cpu_topology() earlier in the boot phase.
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
Link: https://lore.kernel.org/r/20240707003515.5058-1-spersvold@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Jinjie Ruan <ruanjinjie@huawei.com> says:
Add RISC-V USER_STACKTRACE support, and fix the fp alignment bug
in perf_callchain_user() by the way as Björn pointed out.
* b4-shazam-merge:
riscv: stacktrace: Add USER_STACKTRACE support
riscv: Fix fp alignment bug in perf_callchain_user()
Link: https://lore.kernel.org/r/20240708032847.2998158-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In 6.5, we removed the vmalloc fault path because that can't work (see
[1] [2]). Then in order to make sure that new page table entries were
seen by the page table walker, we had to preventively emit a sfence.vma
on all harts [3] but this solution is very costly since it relies on IPI.
And even there, we could end up in a loop of vmalloc faults if a vmalloc
allocation is done in the IPI path (for example if it is traced, see
[4]), which could result in a kernel stack overflow.
Those preventive sfence.vma needed to be emitted because:
- if the uarch caches invalid entries, the new mapping may not be
observed by the page table walker and an invalidation may be needed.
- if the uarch does not cache invalid entries, a reordered access
could "miss" the new mapping and traps: in that case, we would actually
only need to retry the access, no sfence.vma is required.
So this patch removes those preventive sfence.vma and actually handles
the possible (and unlikely) exceptions. And since the kernel stacks
mappings lie in the vmalloc area, this handling must be done very early
when the trap is taken, at the very beginning of handle_exception: this
also rules out the vmalloc allocations in the fault path.
Link: https://lore.kernel.org/linux-riscv/20230531093817.665799-1-bjorn@kernel.org/ [1]
Link: https://lore.kernel.org/linux-riscv/20230801090927.2018653-1-dylan@andestech.com [2]
Link: https://lore.kernel.org/linux-riscv/20230725132246.817726-1-alexghiti@rivosinc.com/ [3]
Link: https://lore.kernel.org/lkml/20200508144043.13893-1-joro@8bytes.org/ [4]
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240717060125.139416-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add support to parse the Svvptc string in the riscv,isa string.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240717060125.139416-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, userstacktrace is unsupported for riscv. So use the
perf_callchain_user() code as blueprint to implement the
arch_stack_walk_user() which add userstacktrace support on riscv.
Meanwhile, we can use arch_stack_walk_user() to simplify the implementation
of perf_callchain_user().
A ftrace test case is shown as below:
# cd /sys/kernel/debug/tracing
# echo 1 > options/userstacktrace
# echo 1 > options/sym-userobj
# echo 1 > events/sched/sched_process_fork/enable
# cat trace
......
bash-178 [000] ...1. 97.968395: sched_process_fork: comm=bash pid=178 child_comm=bash child_pid=231
bash-178 [000] ...1. 97.970075: <user stack trace>
=> /lib/libc.so.6[+0xb5090]
Also a simple perf test is ok as below:
# perf record -e cpu-clock --call-graph fp top
# perf report --call-graph
.....
[[31m 66.54%[[m 0.00% top [kernel.kallsyms] [k] ret_from_exception
|
---ret_from_exception
|
|--[[31m58.97%[[m--do_trap_ecall_u
| |
| |--[[31m17.34%[[m--__riscv_sys_read
| | ksys_read
| | |
| | --[[31m16.88%[[m--vfs_read
| | |
| | |--[[31m10.90%[[m--seq_read
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Tested-by: Jinjie Ruan <ruanjinjie@huawei.com>
Cc: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240708032847.2998158-3-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The standard RISC-V calling convention said:
"The stack grows downward and the stack pointer is always
kept 16-byte aligned".
So perf_callchain_user() should check whether 16-byte aligned for fp.
Link: https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf
Fixes: dbeb90b0c1eb ("riscv: Add perf callchain support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Cc: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240708032847.2998158-2-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The vdso.so.dbg is a debug version of vdso and could be used for debugging
purpose. For example, perf-annotate requires debugging info to show source
lines. So let's keep its debugging info.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Cyril Bur <cyrilbur@tenstorrent.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240611040947.3024710-1-changbin.du@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Nam Cao <namcao@linutronix.de> says:
Hi,
For XIP kernel, the writable data section is always at offset specified in
XIP_OFFSET, which is hard-coded to 32MB.
Unfortunately, this means the read-only section (placed before the
writable section) is restricted in size. This causes build failure if the
kernel gets too large.
This series remove the use of XIP_OFFSET one by one, then remove this
macro entirely at the end, with the goal of lifting this size restriction.
Also some cleanup and documentation along the way.
* b4-shazam-merge
riscv: remove limit on the size of read-only section for XIP kernel
riscv: drop the use of XIP_OFFSET in create_kernel_page_table()
riscv: drop the use of XIP_OFFSET in kernel_mapping_va_to_pa()
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_OFFSET
riscv: replace misleading va_kernel_pa_offset on XIP kernel
riscv: don't export va_kernel_pa_offset in vmcoreinfo for XIP kernel
riscv: cleanup XIP_FIXUP macro
riscv: change XIP's kernel_map.size to be size of the entire kernel
...
Link: https://lore.kernel.org/r/cover.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size. This causes
build failures if the kernel gets too big [1].
Remove this limit.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404211031.J6l2AfJk-lkp@intel.com [1]
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/3bf3a77be10ebb0d8086c028500baa16e7a8e648.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The crash utility uses va_kernel_pa_offset to translate virtual addresses.
This is incorrect in the case of XIP kernel, because va_kernel_pa_offset is
not the virtual-physical address offset (yes, the name is misleading; this
variable will be removed for XIP in a following commit).
Stop exporting this variable for XIP kernel. The replacement is to be
determined, note it as a TODO for now.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/8f8760d3f9a11af4ea0acbc247e4f49ff5d317e9.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Merge ACPI and irqchip updates related to external interrupt controller
support on RISC-V:
- Add ACPI device enumeration support for interrupt controller probing
including taking dependencies into account (Sunil V L).
- Implement ACPI-based interrupt controller probing on RISC-V (Sunil V L).
- Add ACPI support for AIA in riscv-intc and add ACPI support to
riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L).
* acpi-riscv:
irqchip/sifive-plic: Add ACPI support
irqchip/riscv-aplic: Add ACPI support
irqchip/riscv-imsic: Add ACPI support
irqchip/riscv-imsic-state: Create separate function for DT
irqchip/riscv-intc: Add ACPI support for AIA
ACPI: RISC-V: Implement function to add implicit dependencies
ACPI: RISC-V: Initialize GSI mapping structures
ACPI: RISC-V: Implement function to reorder irqchip probe entries
ACPI: RISC-V: Implement PCI related functionality
ACPI: pci_link: Clear the dependencies after probe
ACPI: bus: Add RINTC IRQ model for RISC-V
ACPI: scan: Define weak function to populate dependencies
ACPI: scan: Add RISC-V interrupt controllers to honor list
ACPI: scan: Refactor dependency creation
ACPI: bus: Add acpi_riscv_init() function
ACPI: scan: Add a weak arch_sort_irqchip_probe() to order the IRQCHIP probe
arm64: PCI: Migrate ACPI related functions to pci-acpi.c
|
|
RISCV_ALTERNATIVE_EARLY will issue sbi_ecall() very early in the boot
process, before the first memory mapping is setup so we can't have any
instrumentation happening here.
In addition, when the kernel is relocatable, we must also not issue any
relocation this early since they would have been patched virtually only.
So, instead of disabling instrumentation for the whole kernel/sbi.c file
and compiling it with -fno-pie, simply move __sbi_ecall() and
__sbi_base_ecall() into their own file where this is fixed.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/linux-riscv/20240813-pony-truck-3e7a83e9759e@spud/
Reported-by: syzbot+cfbcb82adf6d7279fd35@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-riscv/00000000000065062c061fcec37b@google.com/
Fixes: 1745cfafebdf ("riscv: don't use global static vars to store alternative data")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240829165048.49756-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
raw_copy_{to,from}_user() do not call access_ok(), so this code allowed
userspace to access any virtual memory address.
Cc: stable@vger.kernel.org
Fixes: 7c83232161f6 ("riscv: add support for misaligned trap handling in S-mode")
Fixes: 441381506ba7 ("riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240815005714.1163136-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
