summaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)Author
2024-01-31riscv: dts: starfive: beaglev-starlight: Setup phy reset gpioCristian Ciocaltea
The BeagleV Starlight SBC uses a Microchip KSZ9031RNXCA PHY supporting RGMII-ID which doesn't require any particular setup, other than defining a reset gpio, as opposed to VisionFive V1 for which the RX internal delay had to be adjusted. Co-developed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-01-31riscv: dts: starfive: visionfive-v1: Setup ethernet phyCristian Ciocaltea
The StarFive VisionFive V1 SBC uses a Motorcomm YT8521 PHY supporting RGMII-ID, but requires manual adjustment of the RX internal delay to work properly. The default RX delay provided by the driver is 1.95 ns, which proves to be too high. Applying a 50% reduction seems to mitigate the issue. Also note this adjustment is not necessary on BeagleV Starlight SBC, which uses a Microchip PHY. Hence, there is no indication of a misbehaviour on the GMAC side, but most likely the issue stems from the Motorcomm PHY. While at it, drop the redundant gpio include, which is already provided by jh7100-common.dtsi. Co-developed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-01-31riscv: dts: starfive: jh7100-common: Setup pinmux and enable gmacCristian Ciocaltea
Add pinmux configuration for DWMAC found on the JH7100 based boards and enable the related DT node, providing a basic PHY configuration. Co-developed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-01-31riscv: dts: starfive: jh7100: Add sysmain and gmac DT nodesCristian Ciocaltea
Provide the sysmain and gmac DT nodes supporting the DWMAC found on the StarFive JH7100 SoC. Co-developed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-01-29riscv, bpf: Optimize bswap insns with Zbb supportPu Lehui
Optimize bswap instructions by rev8 Zbb instruction conbined with srli instruction. And Optimize 16-bit zero-extension with Zbb support. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240115131235.2914289-7-pulehui@huaweicloud.com
2024-01-29riscv, bpf: Optimize sign-extention mov insns with Zbb supportPu Lehui
Add 8-bit and 16-bit sign-extention wraper with Zbb support to optimize sign-extension mov instructions. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240115131235.2914289-6-pulehui@huaweicloud.com
2024-01-29riscv, bpf: Add necessary Zbb instructionsPu Lehui
Add necessary Zbb instructions introduced by [0] to reduce code size and improve performance of RV64 JIT. Meanwhile, a runtime deteted helper is added to check whether the CPU supports Zbb instructions. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://github.com/riscv/riscv-bitmanip/releases/download/1.0.0/bitmanip-1.0.0-38-g865e7a7.pdf [0] Link: https://lore.kernel.org/bpf/20240115131235.2914289-5-pulehui@huaweicloud.com
2024-01-29riscv, bpf: Simplify sext and zext logics in branch instructionsPu Lehui
There are many extension helpers in the current branch instructions, and the implementation is a bit complicated. We simplify this logic through two simple extension helpers with alternate register. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240115131235.2914289-4-pulehui@huaweicloud.com
2024-01-29riscv, bpf: Unify 32-bit zero-extension to emit_zextwPu Lehui
For code unification, add emit_zextw wrapper to unify all the 32-bit zero-extension operations. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240115131235.2914289-3-pulehui@huaweicloud.com
2024-01-29riscv, bpf: Unify 32-bit sign-extension to emit_sextwPu Lehui
For code unification, add emit_sextw wrapper to unify all the 32-bit sign-extension operations. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240115131235.2914289-2-pulehui@huaweicloud.com
2024-01-29riscv: Fix wrong size passed to local_flush_tlb_range_asid()Alexandre Ghiti
local_flush_tlb_range_asid() takes the size as argument, not the end of the range to flush, so fix this by computing the size from the end and the start of the range. Fixes: 7a92fc8b4d20 ("mm: Introduce flush_cache_vmap_early()") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Dennis Zhou <dennis@kernel.org>
2024-01-26Merge tag 'arm-fixes-6.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull arm SoC fixes from Arnd Bergmann: "There are a couple of devicetree fixes for samsung, riscv/sophgo, and for TPM device nodes on a couple of platforms. Both the Arm FF-A and the SCMI firmware drivers get a number of code fixes, addressing minor implementation bugs and compatibility with firmware implementations. Most of these bugs relate to the usage of xarray and rwlock structures and are fixed by Cristian Marussi" * tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint format arm64: dts: Fix TPM schema violations ARM: dts: Fix TPM schema violations ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd arm64: dts: exynos: gs101: comply with the new cmu_misc clock names firmware: arm_ffa: Handle partitions setup failures firmware: arm_ffa: Use xa_insert() and check for result firmware: arm_ffa: Simplify ffa_partitions_cleanup() firmware: arm_ffa: Check xa_load() return value firmware: arm_ffa: Add missing rwlock_init() for the driver partition firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions() firmware: arm_scmi: Fix the clock protocol supported version firmware: arm_scmi: Fix the clock protocol version for v3.2 firmware: arm_scmi: Use xa_insert() when saving raw queues firmware: arm_scmi: Use xa_insert() to store opps firmware: arm_scmi: Replace asm-generic/bug.h with linux/bug.h firmware: arm_scmi: Check mailbox/SMT channel for consistency
2024-01-26Merge tag 'kvm-riscv-6.8-2' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini
KVM/riscv changes for 6.8 part #2 - Zbc extension support for Guest/VM - Scalar crypto extensions support for Guest/VM - Vector crypto extensions support for Guest/VM - Zfh[min] extensions support for Guest/VM - Zihintntl extension support for Guest/VM - Zvfh[min] extensions support for Guest/VM - Zfa extension support for Guest/VM
2024-01-26riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint formatInochi Amaoto
Change the timer layout in the dtb to fit the format that needed by the SBI. Fixes: 967a94a92aaa ("riscv: dts: add initial Sophgo SG2042 SoC device tree") Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-01-25Merge tag 'net-6.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter and WiFi. Jakub is doing a lot of work to include the self-tests in our CI, as a result a significant amount of self-tests related fixes is flowing in (and will likely continue in the next few weeks). Current release - regressions: - bpf: fix a kernel crash for the riscv 64 JIT - bnxt_en: fix memory leak in bnxt_hwrm_get_rings() - revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb" Previous releases - regressions: - core: fix removing a namespace with conflicting altnames - tc/flower: fix chain template offload memory leak - tcp: - make sure init the accept_queue's spinlocks once - fix autocork on CPUs with weak memory model - udp: fix busy polling - mlx5e: - fix out-of-bound read in port timestamping - fix peer flow lists corruption - iwlwifi: fix a memory corruption Previous releases - always broken: - netfilter: - nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain - nft_limit: reject configurations that cause integer overflow - bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a NULL pointer dereference upon shrinking - llc: make llc_ui_sendmsg() more robust against bonding changes - smc: fix illegal rmb_desc access in SMC-D connection dump - dpll: fix pin dump crash for rebound module - bnxt_en: fix possible crash after creating sw mqprio TCs - hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB Misc: - several self-tests fixes for better integration with the netdev CI - added several missing modules descriptions" * tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring tsnep: Remove FCS for XDP data path net: fec: fix the unhandled context fault from smmu selftests: bonding: do not test arp/ns target with mode balance-alb/tlb fjes: fix memleaks in fjes_hw_setup i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full net: fill in MODULE_DESCRIPTION()s for rvu_mbox net: fill in MODULE_DESCRIPTION()s for litex net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio net: fill in MODULE_DESCRIPTION()s for fec ...
2024-01-24riscv: Avoid code duplication with generic bitops implementationXiao Wang
There's code duplication between the fallback implementation for bitops __ffs/__fls/ffs/fls API and the generic C implementation in include/asm-generic/bitops/. To avoid this duplication, this patch renames the generic C implementation by adding a "generic_" prefix to them, then we can use these generic APIs as fallback. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Xiao Wang <xiao.w.wang@intel.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20231112094421.4014931-1-xiao.w.wang@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24riscv: Support RANDOMIZE_KSTACK_OFFSETSong Shuai
Inspired from arm64's implement -- commit 70918779aec9 ("arm64: entry: Enable random_kstack_offset support") Add support of kernel stack offset randomization while handling syscall, the offset is defaultly limited by KSTACK_OFFSET_MAX() (i.e. 10 bits). In order to avoid trigger stack canaries (due to __builtin_alloca) and slowing down the entry path, use __no_stack_protector attribute to disable stack protector for do_trap_ecall_u() at the function level. Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Song Shuai <songshuaishuai@tinylab.org> Link: https://lore.kernel.org/r/20231109133751.212079-1-songshuaishuai@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24RISC-V: Remove duplicated include in smpboot.cYang Li
./arch/riscv/kernel/smpboot.c: asm/cpufeature.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7086 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20231031004018.45074-1-yang.lee@linux.alibaba.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24riscv: blacklist assembly symbols for kprobeClément Léger
Adding kprobes on some assembly functions (mainly exception handling) will result in crashes (either recursive trap or panic). To avoid such errors, add ASM_NOKPROBE() macro which allow adding specific symbols into the __kprobe_blacklist section and use to blacklist the following symbols that showed to be problematic: - handle_exception() - ret_from_exception() - handle_kernel_stack_overflow() Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20231004131009.409193-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24Merge patch series "riscv: support fast gup"Palmer Dabbelt
Jisheng Zhang <jszhang@kernel.org> says: This series adds fast gup support to riscv. The First patch fixes a bug in __p*d_free_tlb(). Per the riscv privileged spec, if non-leaf PTEs I.E pmd, pud or p4d is modified, a sfence.vma is a must. The 2nd patch is a preparation patch. The last two patches do the real work: In order to implement fast gup we need to ensure that the page table walker is protected from page table pages being freed from under it. riscv situation is more complicated than other architectures: some riscv platforms may use IPI to perform TLB shootdown, for example, those platforms which support AIA, usually the riscv_ipi_for_rfence is true on these platforms; some riscv platforms may rely on the SBI to perform TLB shootdown, usually the riscv_ipi_for_rfence is false on these platforms. To keep software pagetable walkers safe in this case we switch to RCU based table free (MMU_GATHER_RCU_TABLE_FREE). See the comment below 'ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE' in include/asm-generic/tlb.h for more details. This patch enables MMU_GATHER_RCU_TABLE_FREE, then use *tlb_remove_page_ptdesc() for those platforms which use IPI to perform TLB shootdown; *tlb_remove_ptdesc() for those platforms which use SBI to perform TLB shootdown; Both case mean that disabling interrupts will block the free and protect the fast gup page walker. So after the 3rd patch, everything is well prepared, let's select HAVE_FAST_GUP if MMU. * b4-shazam-merge: riscv: enable HAVE_FAST_GUP if MMU riscv: enable MMU_GATHER_RCU_TABLE_FREE for SMP && MMU riscv: tlb: convert __p*d_free_tlb() to inline functions riscv: tlb: fix __p*d_free_tlb() Link: https://lore.kernel.org/r/20231219175046.2496-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24riscv: enable HAVE_FAST_GUP if MMUJisheng Zhang
Activate the fast gup for riscv mmu platforms. Here are some GUP_FAST_BENCHMARK performance numbers: Before the patch: GUP_FAST_BENCHMARK: Time: get:53203 put:5085 us After the patch: GUP_FAST_BENCHMARK: Time: get:17711 put:5060 us The get time is reduced by 66.7%! IOW, 3x get speed! Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20231219175046.2496-5-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24riscv: enable MMU_GATHER_RCU_TABLE_FREE for SMP && MMUJisheng Zhang
In order to implement fast gup we need to ensure that the page table walker is protected from page table pages being freed from under it. riscv situation is more complicated than other architectures: some riscv platforms may use IPI to perform TLB shootdown, for example, those platforms which support AIA, usually the riscv_ipi_for_rfence is true on these platforms; some riscv platforms may rely on the SBI to perform TLB shootdown, usually the riscv_ipi_for_rfence is false on these platforms. To keep software pagetable walkers safe in this case we switch to RCU based table free (MMU_GATHER_RCU_TABLE_FREE). See the comment below 'ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE' in include/asm-generic/tlb.h for more details. This patch enables MMU_GATHER_RCU_TABLE_FREE, then use *tlb_remove_page_ptdesc() for those platforms which use IPI to perform TLB shootdown; *tlb_remove_ptdesc() for those platforms which use SBI to perform TLB shootdown; Both case mean that disabling interrupts will block the free and protect the fast gup page walker. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20231219175046.2496-4-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24riscv: tlb: convert __p*d_free_tlb() to inline functionsJisheng Zhang
This is to prepare for enabling MMU_GATHER_RCU_TABLE_FREE. No functionality changes. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20231219175046.2496-3-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24riscv: tlb: fix __p*d_free_tlb()Jisheng Zhang
If non-leaf PTEs I.E pmd, pud or p4d is modified, a sfence.vma is a must for safe, imagine if an implementation caches the non-leaf translation in TLB, although I didn't meet this HW so far, but it's possible in theory. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Fixes: c5e9b2c2ae82 ("riscv: Improve tlb_flush()") Link: https://lore.kernel.org/r/20231219175046.2496-2-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24Merge patch series "riscv: Increase mmap_rnd_bits_max on Sv48/57"Palmer Dabbelt
Sami Tolvanen <samitolvanen@google.com> says: We noticed that 64-bit RISC-V kernels limit mmap_rnd_bits to 24 even if the hardware supports a larger virtual address space size [1]. These two patches allow mmap_rnd_bits_max to be changed during init, and bumps up the maximum randomness if we end up setting up 4/5-level paging at boot. * b4-shazam-merge: riscv: mm: Update mmap_rnd_bits_max mm: Change mmap_rnd_bits_max to __ro_after_init Link: https://lore.kernel.org/r/20230929211155.3910949-4-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24riscv: mm: Update mmap_rnd_bits_maxSami Tolvanen
ARCH_MMAP_RND_BITS_MAX is based on Sv39, which leaves a few potential bits of mmap randomness on the table if we end up enabling 4/5-level paging. Update mmap_rnd_bits_max to take the final address space size into account. This increases mmap_rnd_bits_max from 24 to 33 with Sv48/57. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230929211155.3910949-6-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23riscv, bpf: Fix unpredictable kernel crash about RV64 struct_opsPu Lehui
We encountered a kernel crash triggered by the bpf_tcp_ca testcase as show below: Unable to handle kernel paging request at virtual address ff60000088554500 Oops [#1] ... CPU: 3 PID: 458 Comm: test_progs Tainted: G OE 6.8.0-rc1-kselftest_plain #1 Hardware name: riscv-virtio,qemu (DT) epc : 0xff60000088554500 ra : tcp_ack+0x288/0x1232 epc : ff60000088554500 ra : ffffffff80cc7166 sp : ff2000000117ba50 gp : ffffffff82587b60 tp : ff60000087be0040 t0 : ff60000088554500 t1 : ffffffff801ed24e t2 : 0000000000000000 s0 : ff2000000117bbc0 s1 : 0000000000000500 a0 : ff20000000691000 a1 : 0000000000000018 a2 : 0000000000000001 a3 : ff60000087be03a0 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000000021 a7 : ffffffff8263f880 s2 : 000000004ac3c13b s3 : 000000004ac3c13a s4 : 0000000000008200 s5 : 0000000000000001 s6 : 0000000000000104 s7 : ff2000000117bb00 s8 : ff600000885544c0 s9 : 0000000000000000 s10: ff60000086ff0b80 s11: 000055557983a9c0 t3 : 0000000000000000 t4 : 000000000000ffc4 t5 : ffffffff8154f170 t6 : 0000000000000030 status: 0000000200000120 badaddr: ff60000088554500 cause: 000000000000000c Code: c796 67d7 0000 0000 0052 0002 c13b 4ac3 0000 0000 (0001) 0000 ---[ end trace 0000000000000000 ]--- The reason is that commit 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") changes the func_addr of arch_prepare_bpf_trampoline in struct_ops from NULL to non-NULL, while we use func_addr on RV64 to differentiate between struct_ops and regular trampoline. When the struct_ops testcase is triggered, it emits wrong prologue and epilogue, and lead to unpredictable issues. After commit 2cd3e3772e41, we can use BPF_TRAMP_F_INDIRECT to distinguish them as it always be set in struct_ops. Fixes: 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240123023207.1917284-1-pulehui@huaweicloud.com
2024-01-23Revert "RISC-V: mark hibernation as nonportable"Conor Dooley
Revert commit ed309ce52218 ("RISC-V: mark hibernation as nonportable") as it appears the broken versions of OpenSBI have not made it to production on any systems that support hibernation. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230802-chef-throng-d9de8b672a49@wendy Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22Merge patch series "RISC-V crypto with reworked asm files"Palmer Dabbelt
Eric Biggers <ebiggers@kernel.org> says: This patchset, which applies to v6.8-rc1, adds cryptographic algorithm implementations accelerated using the RISC-V vector crypto extensions (https://github.com/riscv/riscv-crypto/releases/download/v1.0.0/riscv-crypto-spec-vector.pdf) and RISC-V vector extension (https://github.com/riscv/riscv-v-spec/releases/download/v1.0/riscv-v-spec-1.0.pdf). The following algorithms are included: AES in ECB, CBC, CTR, and XTS modes; ChaCha20; GHASH; SHA-2; SM3; and SM4. In general, the assembly code requires a 64-bit RISC-V CPU with VLEN >= 128, little endian byte order, and vector unaligned access support. The ECB, CTR, XTS, and ChaCha20 code is designed to naturally scale up to larger VLEN values. Building the assembly code requires tip-of-tree binutils (future 2.42) or tip-of-tree clang (future 18.x). All algorithms pass testing in QEMU, using CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y. Much of the assembly code is derived from OpenSSL code that was added by https://github.com/openssl/openssl/pull/21923. It's been cleaned up for integration with the kernel, e.g. reducing code duplication, eliminating use of .inst and perlasm, and fixing a few bugs. This patchset incorporates the work of multiple people, including Jerry Shih, Heiko Stuebner, Christoph Müllner, Phoebe Chen, Charalampos Mitrodimas, and myself. This patchset went through several versions from Heiko (last version https://lore.kernel.org/linux-crypto/20230711153743.1970625-1-heiko@sntech.de), then several versions from Jerry (last version: https://lore.kernel.org/linux-crypto/20231231152743.6304-1-jerry.shih@sifive.com), then finally several versions from me. Thanks to everyone who has contributed to this patchset or its prerequisites. * b4-shazam-merge: crypto: riscv - add vector crypto accelerated SM4 crypto: riscv - add vector crypto accelerated SM3 crypto: riscv - add vector crypto accelerated SHA-{512,384} crypto: riscv - add vector crypto accelerated SHA-{256,224} crypto: riscv - add vector crypto accelerated GHASH crypto: riscv - add vector crypto accelerated ChaCha20 crypto: riscv - add vector crypto accelerated AES-{ECB,CBC,CTR,XTS} RISC-V: hook new crypto subdir into build-system RISC-V: add TOOLCHAIN_HAS_VECTOR_CRYPTO RISC-V: add helper function to read the vector VLEN Link: https://lore.kernel.org/r/20240122002024.27477-1-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22crypto: riscv - add vector crypto accelerated SM4Jerry Shih
Add an implementation of SM4 using the Zvksed extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and greatly reducing code duplication. Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-11-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22crypto: riscv - add vector crypto accelerated SM3Jerry Shih
Add an implementation of SM3 using the Zvksh extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and greatly reducing code duplication. Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-10-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22crypto: riscv - add vector crypto accelerated SHA-{512,384}Jerry Shih
Add an implementation of SHA-512 and SHA-384 using the Zvknhb extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and greatly reducing code duplication. Co-developed-by: Charalampos Mitrodimas <charalampos.mitrodimas@vrull.eu> Signed-off-by: Charalampos Mitrodimas <charalampos.mitrodimas@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Co-developed-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-9-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22crypto: riscv - add vector crypto accelerated SHA-{256,224}Jerry Shih
Add an implementation of SHA-256 and SHA-224 using the Zvknha or Zvknhb extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and greatly reducing code duplication. Co-developed-by: Charalampos Mitrodimas <charalampos.mitrodimas@vrull.eu> Signed-off-by: Charalampos Mitrodimas <charalampos.mitrodimas@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Co-developed-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-8-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22crypto: riscv - add vector crypto accelerated GHASHJerry Shih
Add an implementation of GHASH using the zvkg extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', reducing code duplication, and eliminating unnecessary endianness conversions. Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-7-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22crypto: riscv - add vector crypto accelerated ChaCha20Jerry Shih
Add an implementation of ChaCha20 using the Zvkb extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and reducing code duplication. Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-6-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22crypto: riscv - add vector crypto accelerated AES-{ECB,CBC,CTR,XTS}Jerry Shih
Add implementations of AES-ECB, AES-CBC, AES-CTR, and AES-XTS, as well as bare (single-block) AES, using the RISC-V vector crypto extensions. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using regular .S files instead of the so-called perlasm, using the assembler instead of bare '.inst', greatly reducing code duplication, supporting AES-192, and making the code use the same AES key structure as the C code. Co-developed-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-5-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22RISC-V: hook new crypto subdir into build-systemHeiko Stuebner
Create a crypto subdirectory for added accelerated cryptography routines and hook it into the riscv Kbuild and the main crypto Kconfig. Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-4-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22RISC-V: add TOOLCHAIN_HAS_VECTOR_CRYPTOEric Biggers
Add a kconfig symbol that indicates whether the toolchain supports the vector crypto extensions. This is needed by the RISC-V crypto code. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-3-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22RISC-V: add helper function to read the vector VLENHeiko Stuebner
VLEN describes the length of each vector register and some instructions need specific minimal VLENs to work correctly. The vector code already includes a variable riscv_v_vsize that contains the value of "32 vector registers with vlenb length" that gets filled during boot. vlenb is the value contained in the CSR_VLENB register and the value represents "VLEN / 8". So add riscv_vector_vlen() to return the actual VLEN value for in-kernel users when they need to check the available VLEN. Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-2-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22riscv: dts: starfive: jh7110: Add PWM node and pins configurationWilliam Qiu
Add OpenCores PWM controller node and add PWM pins configuration on VisionFive 2 board. Signed-off-by: William Qiu <william.qiu@starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-01-22riscv: dts: starfive: jh7100: Add PWM node and pins configurationWilliam Qiu
Add OpenCores PWM controller node and add PWM pins configuration on VisionFive 1 board. Signed-off-by: William Qiu <william.qiu@starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-01-22RISC-V: build: Allow LTO to be selectedWende Tan
Allow LTO to be selected for RISC-V, only when LLD >= 14, since there is an issue [1] in prior LLD versions that prevents LLD to generate proper machine code for RISC-V when writing `nop`s. To avoid boot failures in QEMU [2], '-mattr=+c' and '-mattr=+relax' need to be passed via '-mllvm' to ld.lld, as there appears to be an issue with LLVM's target-features and LTO [3], which can result in incorrect relocations to branch targets [4]. Once this is fixed in LLVM, it can be made conditional on affected ld.lld versions. Disable LTO for arch/riscv/kernel/pi, as llvm-objcopy expects an ELF object file when manipulating the files in that subfolder, rather than LLVM bitcode. [1] https://github.com/llvm/llvm-project/issues/50505, resolved by LLVM commit e63455d5e0e5 ("[MC] Use local MCSubtargetInfo in writeNops") [2] https://github.com/ClangBuiltLinux/linux/issues/1942 [3] https://github.com/llvm/llvm-project/issues/59350 [4] https://github.com/llvm/llvm-project/issues/65090 Tested-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Wende Tan <twd2.me@gmail.com> Co-developed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231017-riscv-lto-v4-1-e7810b24e805@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-21riscv: remove unneeded #include <asm-generic/export.h>Masahiro Yamada
Commit 62694797f56b ("use linux/export.h rather than asm-generic/export.h") replaced deprecated <asm-generic/export.h> inclusions. Commit c2a658d41924 ("riscv: lib: vectorize copy_to_user/copy_from_user") introduced a new instance of #include <asm-generic/export.h>. arch/riscv/lib/uaccess_vector.S does not use EXPORT_SYMBOL, hence this include directive is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240120213312.3033528-1-masahiroy@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-20Merge tag 'riscv-for-linus-6.8-mw4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for tuning for systems with fast misaligned accesses. - Support for SBI-based suspend. - Support for the new SBI debug console extension. - The T-Head CMOs now use PA-based flushes. - Support for enabling the V extension in kernel code. - Optimized IP checksum routines. - Various ftrace improvements. - Support for archrandom, which depends on the Zkr extension. - The build is no longer broken under NET=n, KUNIT=y for ports that don't define their own ipv6 checksum. * tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits) lib: checksum: Fix build with CONFIG_NET=n riscv: lib: Check if output in asm goto supported riscv: Fix build error on rv32 + XIP riscv: optimize ELF relocation function in riscv RISC-V: Implement archrandom when Zkr is available riscv: Optimize hweight API with Zbb extension riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI] riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support riscv: ftrace: Make function graph use ftrace directly riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name riscv: Restrict DWARF5 when building with LLVM to known working versions riscv: Hoist linker relaxation disabling logic into Kconfig kunit: Add tests for csum_ipv6_magic and ip_fast_csum riscv: Add checksum library riscv: Add checksum header riscv: Add static key for misaligned accesses asm-generic: Improve csum_fold RISC-V: selftests: cbo: Ensure asm operands match constraints ...
2024-01-19RISC-V: KVM: Allow Zfa extension for Guest/VMAnup Patel
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zfa extension for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VMAnup Patel
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zvfh[min] extensions for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow Zihintntl extension for Guest/VMAnup Patel
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zihintntl extension for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow Zfh[min] extensions for Guest/VMAnup Patel
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zfh[min] extensions for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow vector crypto extensions for Guest/VMAnup Patel
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable vector crypto extensions for Guest/VM. This includes extensions Zvbb, Zvbc, Zvkb, Zvkg, Zvkned, Zvknha, Zvknhb, Zvksed, Zvksh, and Zvkt. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow scalar crypto extensions for Guest/VMAnup Patel
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable scalar crypto extensions for Guest/VM. This includes extensions Zbkb, Zbkc, Zbkx, Zknd, Zkne, Zknh, Zkr, Zksed, Zksh, and Zkt. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
generated by cgit (git 2.34.1) at 2025-09-23 08:28:07 +0000