summaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)Author
2025-03-14KVM: s390: pv: fix race when making a page secureClaudio Imbrenda
Holding the pte lock for the page that is being converted to secure is needed to avoid races. A previous commit removed the locking, which caused issues. Fix by locking the pte again. Fixes: 5cbe24350b7d ("KVM: s390: move pv gmap functions into kvm") Reported-by: David Hildenbrand <david@redhat.com> Tested-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [david@redhat.com: replace use of get_locked_pte() with folio_walk_start()] Link: https://lore.kernel.org/r/20250312184912.269414-2-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250312184912.269414-2-imbrenda@linux.ibm.com>
2025-03-07Merge tag 's390-6.14-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix return address recovery of traced function in ftrace to ensure reliable stack unwinding - Fix compiler warnings and runtime crashes of vDSO selftests on s390 by introducing a dedicated GNU hash bucket pointer with correct 32-bit entry size - Fix test_monitor_call() inline asm, which misses CC clobber, by switching to an instruction that doesn't modify CC * tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ftrace: Fix return address recovery of traced function selftests/vDSO: Fix GNU hash table entry size for s390x s390/traps: Fix test_monitor_call() inline assembly
2025-03-04s390/ftrace: Fix return address recovery of traced functionSumanth Korikkar
When fgraph is enabled the traced function return address is replaced with trampoline return_to_handler(). The original return address of the traced function is saved in per task return stack along with a stack pointer for reliable stack unwinding via function_graph_enter_regs(). During stack unwinding e.g. for livepatching, ftrace_graph_ret_addr() identifies the original return address of the traced function with the saved stack pointer. With a recent change, the stack pointers passed to ftrace_graph_ret_addr() and function_graph_enter_regs() do not match anymore, and therefore the original return address is not found. Pass the correct stack pointer to function_graph_enter_regs() to fix this. Fixes: 7495e179b478 ("s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04s390/traps: Fix test_monitor_call() inline assemblyHeiko Carstens
The test_monitor_call() inline assembly uses the xgr instruction, which also modifies the condition code, to clear a register. However the clobber list of the inline assembly does not specify that the condition code is modified, which may lead to incorrect code generation. Use the lhi instruction instead to clear the register without that the condition code is modified. Furthermore this limits clearing to the lower 32 bits of val, since its type is int. Fixes: 17248ea03674 ("s390: fix __EMIT_BUG() macro") Cc: stable@vger.kernel.org Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-01Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Ryan's been hard at work finding and fixing mm bugs in the arm64 code, so here's a small crop of fixes for -rc5. The main changes are to fix our zapping of non-present PTEs for hugetlb entries created using the contiguous bit in the page-table rather than a block entry at the level above. Prior to these fixes, we were pulling the contiguous bit back out of the PTE in order to determine the size of the hugetlb page but this is clearly bogus if the thing isn't present and consequently both the clearing of the PTE(s) and the TLB invalidation were unreliable. Although the problem was found by code inspection, we really don't want this sitting around waiting to trigger and the changes are CC'd to stable accordingly. Note that the diffstat looks a lot worse than it really is; huge_ptep_get_and_clear() now takes a size argument from the core code and so all the arch implementations of that have been updated in a pretty mechanical fashion. - Fix a sporadic boot failure due to incorrect randomization of the linear map on systems that support it - Fix the zapping (both clearing the entries *and* invalidating the TLB) of hugetlb PTEs constructed using the contiguous bit" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hugetlb: Fix flush_hugetlb_tlb_range() invalidation level arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear() arm64/mm: Fix Boot panic on Ampere Altra
2025-02-27mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()Ryan Roberts
In order to fix a bug, arm64 needs to be told the size of the huge page for which the huge_pte is being cleared in huge_ptep_get_and_clear(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear() and set_huge_pte_at(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, loongarch, mips, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. Cc: stable@vger.kernel.org Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit") Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390 Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2025-02-18s390/boot: Fix ESSA detectionHeiko Carstens
The cmma_test_essa() inline assembly uses tmp as input and output, however tmp is specified as output only, which allows the compiler to optimize the initialization of tmp away. Therefore the ESSA detection may or may not work depending on previous contents of the register that the compiler selected for tmp. Fix this by using the correct constraint modifier. Fixes: 468a3bc2b7b9 ("s390/cmma: move parsing of cmma kernel parameter to early boot code") Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-02-18s390/purgatory: Use -D__DISABLE_EXPORTSSami Tolvanen
The object files in purgatory do not export symbols, so disable exports for all the object files, not only sha256.o, with -D__DISABLE_EXPORTS. This fixes a build failure with CONFIG_GENDWARFKSYMS, where we would otherwise attempt to calculate symbol versions for purgatory objects and fail because they're not built with debugging information: error: gendwarfksyms: process_module: dwarf_get_units failed: no debugging information? make[5]: *** [../scripts/Makefile.build:207: arch/s390/purgatory/string.o] Error 1 make[5]: *** Deleting file 'arch/s390/purgatory/string.o' Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502120752.U3fOKScQ-lkp@intel.com/ Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20250213211614.3537605-2-samitolvanen@google.com Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-02-18s390: Update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-02-11s390/pci: Fix handling of isolated VFsNiklas Schnelle
In contrast to the commit message of the fixed commit VFs whose parent PF is not configured are not always isolated, that is put on their own PCI domain. This is because for VFs to be added to an existing PCI domain it is enough for that PCI domain to share the same topology ID or PCHID. Such a matching PCI domain without a parent PF may exist when a PF from the same PCI card created the domain with the VF being a child of a different, non accessible, PF. While not causing technical issues it makes the rules which VFs are isolated inconsistent. Fix this by explicitly checking that the parent PF exists on the PCI domain determined by the topology ID or PCHID before registering the VF. This works because a parent PF which is under control of this Linux instance must be enabled and configured at the point where its child VFs appear because otherwise SR-IOV could not have been enabled on the parent. Fixes: 25f39d3dcb48 ("s390/pci: Ignore RID for isolated VFs") Cc: stable@vger.kernel.org Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-02-11s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn()Niklas Schnelle
This creates a new zpci_iov_find_parent_pf() function which a future commit can use to find if a VF has a configured parent PF. Use zdev->rid instead of zdev->devfn such that the new function can be used before it has been decided if the RID will be exposed and zdev->devfn is set. Also handle the hypotheical case that the RID is not available but there is an otherwise matching zbus. Fixes: 25f39d3dcb48 ("s390/pci: Ignore RID for isolated VFs") Cc: stable@vger.kernel.org Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-02-11s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHESHeiko Carstens
With PROFILE_ALL_BRANCHES enabled gcc sometimes fails to handle __builtin_constant_p() correctly: In function 'arch_test_bit', inlined from 'node_state' at include/linux/nodemask.h:423:9, inlined from 'warn_if_node_offline' at include/linux/gfp.h:252:2, inlined from '__alloc_pages_node_noprof' at include/linux/gfp.h:267:2, inlined from 'alloc_pages_node_noprof' at include/linux/gfp.h:296:9, inlined from 'vm_area_alloc_pages.constprop' at mm/vmalloc.c:3591:11: >> arch/s390/include/asm/bitops.h:60:17: warning: 'asm' operand 2 probably does not match constraints 60 | asm volatile( | ^~~ >> arch/s390/include/asm/bitops.h:60:17: error: impossible constraint in 'asm' Therefore disable the optimization for this case. This is similar to commit 63678eecec57 ("s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES") Fixes: b2bc1b1a77c0 ("s390/bitops: Provide optimized arch_test_bit()") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502091912.xL2xTCGw-lkp@intel.com/ Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-02-11s390/configs: Remove CONFIG_LSMIlya Leoshkevich
s390 defconfig does not have BPF LSM, resulting in systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported. with the respective kernels. The other architectures do not explicitly set it, and the default values have BPF in them, so just drop it. Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-02-04Merge tag 'kvm-s390-next-6.14-2' of ↵Paolo Bonzini
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD - some selftest fixes - move some kvm-related functions from mm into kvm - remove all usage of page->index and page->lru from kvm - fixes and cleanups for vsie
2025-01-31Merge tag 'kbuild-v6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support multiple hook locations for maint scripts of Debian package - Remove 'cpio' from the build tool requirement - Introduce gendwarfksyms tool, which computes CRCs for export symbols based on the DWARF information - Support CONFIG_MODVERSIONS for Rust - Resolve all conflicts in the genksyms parser - Fix several syntax errors in genksyms * tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits) kbuild: fix Clang LTO with CONFIG_OBJTOOL=n kbuild: Strip runtime const RELA sections correctly kconfig: fix memory leak in sym_warn_unmet_dep() kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST genksyms: fix syntax error for attribute before init-declarator genksyms: fix syntax error for builtin (u)int*x*_t types genksyms: fix syntax error for attribute after 'union' genksyms: fix syntax error for attribute after 'struct' genksyms: fix syntax error for attribute after abstact_declarator genksyms: fix syntax error for attribute before nested_declarator genksyms: fix syntax error for attribute before abstract_declarator genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier genksyms: record attributes consistently for init-declarator genksyms: restrict direct-declarator to take one parameter-type-list genksyms: restrict direct-abstract-declarator to take one parameter-type-list genksyms: remove Makefile hack genksyms: fix last 3 shift/reduce conflicts genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts genksyms: reduce type_qualifier directly to decl_specifier genksyms: rename cvar_qualifier to type_qualifier ...
2025-02-01kbuild: Strip runtime const RELA sections correctlyArd Biesheuvel
Due to the fact that runtime const ELF sections are named without a leading period or double underscore, the RSTRIP logic that removes the static RELA sections from vmlinux fails to identify them. This results in a situation like below, where some sections that were supposed to get removed are left behind. [Nr] Name Type Address Off Size ES Flg Lk Inf Al [58] runtime_shift_d_hash_shift PROGBITS ffffffff83500f50 2900f50 000014 00 A 0 0 1 [59] .relaruntime_shift_d_hash_shift RELA 0000000000000000 55b6f00 000078 18 I 70 58 8 [60] runtime_ptr_dentry_hashtable PROGBITS ffffffff83500f68 2900f68 000014 00 A 0 0 1 [61] .relaruntime_ptr_dentry_hashtable RELA 0000000000000000 55b6f78 000078 18 I 70 60 8 [62] runtime_ptr_USER_PTR_MAX PROGBITS ffffffff83500f80 2900f80 000238 00 A 0 0 1 [63] .relaruntime_ptr_USER_PTR_MAX RELA 0000000000000000 55b6ff0 000d50 18 I 70 62 8 So tweak the match expression to strip all sections starting with .rel. While at it, consolidate the logic used by RISC-V, s390 and x86 into a single shared Makefile library command. Link: https://lore.kernel.org/all/CAHk-=wjk3ynjomNvFN8jf9A1k=qSc=JFF591W00uXj-qqNUxPQ@mail.gmail.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-01-31KVM: s390: remove the last user of page->indexClaudio Imbrenda
Shadow page tables use page->index to keep the g2 address of the guest page table being shadowed. Instead of keeping the information in page->index, split the address and smear it over the 16-bit softbits areas of 4 PGSTEs. This removes the last s390 user of page->index. Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-16-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-16-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: move PGSTE softbitsClaudio Imbrenda
Move the softbits in the PGSTEs to the other usable area. This leaves the 16-bit block of usable bits free, which will be used in the next patch for something else. Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-15-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-15-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: remove useless page->index usageClaudio Imbrenda
The page->index field for VSIE dat tables is only used for segment tables. Stop setting the field for all region tables. Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-14-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-14-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: move gmap_shadow_pgt_lookup() into kvmClaudio Imbrenda
Move gmap_shadow_pgt_lookup() from mm/gmap.c into kvm/gaccess.c . Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-13-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-13-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: stop using lists to keep track of used dat tablesClaudio Imbrenda
Until now, every dat table allocated to map a guest was put in a linked list. The page->lru field of struct page was used to keep track of which pages were being used, and when the gmap is torn down, the list was walked and all pages freed. This patch gets rid of the usage of page->lru. Page tables are now freed by recursively walking the dat table tree. Since s390_unlist_old_asce() becomes useless now, remove it. Acked-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-12-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-12-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: stop using page->index for non-shadow gmapsClaudio Imbrenda
The host_to_guest radix tree will now map userspace addresses to guest addresses, instead of userspace addresses to segment tables. When segment tables and page tables are needed, they are found using an additional gmap_table_walk(). This gets rid of all usage of page->index for non-shadow gmaps. Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-11-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-11-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: move some gmap shadowing functions away from mm/gmap.cClaudio Imbrenda
Move some gmap shadowing functions from mm/gmap.c to kvm/kvm-s390.c and the newly created kvm/gmap-vsie.c This is a step toward removing gmap from mm. Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-10-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-10-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: get rid of gmap_translate()Claudio Imbrenda
Add gpa_to_hva(), which uses memslots, and use it to replace all uses of gmap_translate(). Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-9-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-9-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: get rid of gmap_fault()Claudio Imbrenda
All gmap page faults are already handled in kvm by the function kvm_s390_handle_dat_fault(); only few users of gmap_fault remained, all within kvm. Convert those calls to use kvm_s390_handle_dat_fault() instead. Remove gmap_fault() entirely since it has no more users. Acked-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-8-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-8-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: use __kvm_faultin_pfn()Claudio Imbrenda
Refactor the existing page fault handling code to use __kvm_faultin_pfn(). This possible now that memslots are always present. Acked-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-7-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-7-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: move pv gmap functions into kvmClaudio Imbrenda
Move gmap related functions from kernel/uv into kvm. Create a new file to collect gmap-related functions. Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> [fixed unpack_one(), thanks mhartmay@linux.ibm.com] Link: https://lore.kernel.org/r/20250123144627.312456-6-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-6-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: fake memslot for ucontrol VMsClaudio Imbrenda
Create a fake memslot for ucontrol VMs. The fake memslot identity-maps userspace. Now memslots will always be present, and ucontrol is not a special case anymore. Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20250123144627.312456-4-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-4-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: wrapper for KVM_BUGClaudio Imbrenda
Wrap the call to KVM_BUG; this reduces code duplication and improves readability. Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20250123144627.312456-3-imbrenda@linux.ibm.com Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20250123144627.312456-3-imbrenda@linux.ibm.com>
2025-01-31KVM: s390: vsie: stop using "struct page" for vsie pageDavid Hildenbrand
Now that we no longer use page->index and the page refcount explicitly, let's avoid messing with "struct page" completely. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Tested-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Message-ID: <20250107154344.1003072-5-david@redhat.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
2025-01-31KVM: s390: vsie: stop messing with page refcountDavid Hildenbrand
Let's stop messing with the page refcount, and use a flag that is set / cleared atomically to remember whether a vsie page is currently in use. Note that we could use a page flag, or a lower bit of the scb_gpa. Let's keep it simple for now, we have sufficient space. While at it, stop passing "struct kvm *" to put_vsie_page(), it's unused. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Tested-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Message-ID: <20250107154344.1003072-4-david@redhat.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
2025-01-31KVM: s390: vsie: stop using page->indexDavid Hildenbrand
Let's stop using page->index, and instead use a field inside "struct vsie_page" to hold that value. We have plenty of space left in there. This is one part of stopping using "struct page" when working with vsie pages. We place the "page_to_virt(page)" strategically, so the next cleanups requires less churn. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Tested-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Message-ID: <20250107154344.1003072-3-david@redhat.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
2025-01-31KVM: s390: vsie: fix some corner-cases when grabbing vsie pagesDavid Hildenbrand
We try to reuse the same vsie page when re-executing the vsie with a given SCB address. The result is that we use the same shadow SCB -- residing in the vsie page -- and can avoid flushing the TLB when re-running the vsie on a CPU. So, when we allocate a fresh vsie page, or when we reuse a vsie page for a different SCB address -- reusing the shadow SCB in different context -- we set ihcpu=0xffff to trigger the flush. However, after we looked up the SCB address in the radix tree, but before we grabbed the vsie page by raising the refcount to 2, someone could reuse the vsie page for a different SCB address, adjusting page->index and the radix tree. In that case, we would be reusing the vsie page with a wrong page->index. Another corner case is that we might set the SCB address for a vsie page, but fail the insertion into the radix tree. Whoever would reuse that page would remove the corresponding radix tree entry -- which might now be a valid entry pointing at another page, resulting in the wrong vsie page getting removed from the radix tree. Let's handle such races better, by validating that the SCB address of a vsie page didn't change after we grabbed it (not reuse for a different SCB; the alternative would be performing another tree lookup), and by setting the SCB address to invalid until the insertion in the tree succeeded (SCB addresses are aligned to 512, so ULONG_MAX is invalid). These scenarios are rare, the effects a bit unclear, and these issues were only found by code inspection. Let's CC stable to be safe. Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization") Cc: stable@vger.kernel.org Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Tested-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Message-ID: <20250107154344.1003072-2-david@redhat.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
2025-01-30Merge tag 's390-6.14-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Alexander Gordeev: - Architecutre-specific ftrace recursion trylock tests were removed in favour of the generic function_graph_enter(), but s390 got missed. Remove this test for s390 as well. - Add ftrace_get_symaddr() for s390, which returns the symbol address from ftrace 'ip' parameter * tag 's390-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/tracing: Define ftrace_get_symaddr() for s390 s390/fgraph: Fix to remove ftrace_test_recursion_trylock()
2025-01-30Merge tag 's390-6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - The rework that uncoupled physical and virtual address spaces inadvertently prevented KASAN shadow mappings from using large pages. Restore large page mappings for KASAN shadows - Add decompressor routine physmem_alloc() that may fail, unlike physmem_alloc_or_die(). This allows callers to implement fallback paths - Allow falling back from large pages to smaller pages (1MB or 4KB) if the allocation of 2GB pages in the decompressor can not be fulfilled - Add to the decompressor boot print support of "%%" format string, width and padding hadnling, length modifiers and decimal conversion specifiers - Add to the decompressor message severity levels similar to kernel ones. Support command-line options that control console output verbosity - Replaces boot_printk() calls with appropriate loglevel- specific helpers such as boot_emerg(), boot_warn(), and boot_debug(). - Collect all boot messages into a ring buffer independent of the current log level. This is particularly useful for early crash analysis - If 'earlyprintk' command line parameter is not specified, store decompressor boot messages in a ring buffer to be printed later by the kernel, once the console driver is registered - Add 'bootdebug' command line parameter to enable printing of decompressor debug messages when needed. That parameters allows message suppressing and filtering - Dump boot messages on a decompressor crash, but only if 'bootdebug' command line parameter is enabled - When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages in the same format as regular printk() - Dump physical memory tracking information on boot: online ranges, reserved areas and vmem allocations - Dump virtual memory layout and randomization details - Improve decompression error reporting and dump the message ring buffer in case the boot failed and system halted - Add an exception handler which handles exceptions when FPU control register is attempted to be set to an invalid value. Remove '.fixup' section as result of this change - Use 'A', 'O', and 'R' inline assembly format flags, which allows recent Clang compilers to generate better FPU code - Rework uaccess code so it reads better and generates more efficient code - Cleanup futex inline assembly code - Disable KMSAN instrumention for futex inline assemblies, which contain dereferenced user pointers. Otherwise, shadows for the user pointers would be accessed - PFs which are not initially configured but in standby create only a single-function PCI domain. If they are configured later on, sibling PFs and their child VFs will not be added to their PCI domain breaking SR-IOV expectations. Fix that by allowing initially configured but in standby PFs create multi-function PCI domains - Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid compile errors caused by kernel's own definitions of 'bool', 'false', and 'true' conflicting with the C23 reserved keywords - Fix sclp subsystem failure when a sclp console is not present - Fix misuse of non-NULL terminated strings in vmlogrdr driver - Various other small improvements, cleanups and fixes * tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits) s390/vmlogrdr: Use array instead of string initializer s390/vmlogrdr: Use internal_name for error messages s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init() s390/tools: Use array instead of string initializer s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init() s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS s390/bitops: Use correct constraint for arch_test_bit() inline assembly s390/pci: Fix SR-IOV for PFs initially in standby s390/futex: Avoid KMSAN instrumention for user pointers s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline s390/futex: Cleanup futex_atomic_cmpxchg_inatomic() s390/futex: Generate futex atomic op functions s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER s390/uaccess: Use asm goto for put_user()/get_user() s390/uaccess: Remove usage of the oac specifier s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers s390/uaccess: Move put_user() / __put_user() close to put_user() asm code s390/uaccess: Use asm goto for __mvc_kernel_nofault() ...
2025-01-29s390/tracing: Define ftrace_get_symaddr() for s390Masami Hiramatsu (Google)
Add ftrace_get_symaddr() for s390, which returns the symbol address from ftrace's 'ip' parameter. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/173807818869.1854334.15474589105952793986.stgit@devnote2 Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-29s390/fgraph: Fix to remove ftrace_test_recursion_trylock()Masami Hiramatsu (Google)
Fix to remove ftrace_test_recursion_trylock() from ftrace_graph_func() because commit d576aec24df9 ("fgraph: Get ftrace recursion lock in function_graph_enter") has been moved it to function_graph_enter_regs() already. Reported-by: Jiri Olsa <olsajiri@gmail.com> Closes: https://lore.kernel.org/all/Z5O0shrdgeExZ2kF@krava/ Fixes: d576aec24df9 ("fgraph: Get ftrace recursion lock in function_graph_enter") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/173807817692.1854334.2985776940754607459.stgit@devnote2 Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-28s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()Heiko Carstens
With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem was added to smp_prepare_cpus(). This will usually succeed since the sclp subsystem is implicitly initialized early enough if an sclp based console is present. If no such console is present the initialization happens with an arch_initcall(); in such cases calls to the sclp subsystem will fail. For CPU detection this means that the fallback sigp loop will be used permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp request. Fix this by adding an explicit early sclp_init() call via arch_cpu_finalize_init(). Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com> Fixes: 4a39f12e753d ("s390/smp: Switch to GENERIC_CPU_DEVICES") Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-28s390/tools: Use array instead of string initializerHeiko Carstens
The in-kernel disassembler intentionally uses nun-null terminated strings in order to keep the arrays which contain mnemonics as small as possible. GCC 15 however warns about this: ./arch/s390/include/generated/asm/dis-defs.h:1662:71: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization] 1662 | [1261] = { .opfrag = 0xea, .format = INSTR_SS_L0RDRD, .name = "unpka" }, \ Get rid of this warning by using array initializers. Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-28treewide: const qualify ctl_tables where applicableJoel Granados
Add the const qualifier to all the ctl_tables in the tree except for watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls, loadpin_sysctl_table and the ones calling register_net_sysctl (./net, drivers/inifiniband dirs). These are special cases as they use a registration function with a non-const qualified ctl_table argument or modify the arrays before passing them on to the registration function. Constifying ctl_table structs will prevent the modification of proc_handler function pointers as the arrays would reside in .rodata. This is made possible after commit 78eb4ea25cd5 ("sysctl: treewide: constify the ctl_table argument of proc_handlers") constified all the proc_handlers. Created this by running an spatch followed by a sed command: Spatch: virtual patch @ depends on !(file in "net") disable optional_qualifier @ identifier table_name != { watchdog_hardlockup_sysctl, iwcm_ctl_table, ucma_ctl_table, memory_allocation_profiling_sysctls, loadpin_sysctl_table }; @@ + const struct ctl_table table_name [] = { ... }; sed: sed --in-place \ -e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \ kernel/utsname_sysctl.c Reviewed-by: Song Liu <song@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/ Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Bill O'Donnell <bodonnel@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Acked-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Joel Granados <joel.granados@kernel.org>
2025-01-28s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init()Vasily Gorbik
Fixes the following clang warning introduced by commit d7bebcb4a898 ("s390: Optimize __pa/__va when RANDOMIZE_IDENTITY_BASE is off") arch/s390/mm/vmem.c:665:36: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 665 | __set_memory_4k(__va(0), __va(0) + ident_map_size); | ~~~~~~~ ^ Fixes: d7bebcb4a898 ("s390: Optimize __pa/__va when RANDOMIZE_IDENTITY_BASE is off") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501270309.HzsVNo3o-lkp@intel.com/ Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-28s390: Add '-std=gnu11' to decompressor and purgatory CFLAGSNathan Chancellor
GCC changed the default C standard dialect from gnu17 to gnu23, which should not have impacted the kernel because it explicitly requests the gnu11 standard in the main Makefile. However, there are certain places in the s390 code that use their own CFLAGS without a '-std=' value, which break with this dialect change because of the kernel's own definitions of bool, false, and true conflicting with the C23 reserved keywords. include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant 11 | false = 0, | ^~~~~ include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef' 35 | typedef _Bool bool; | ^~~~ include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards Add '-std=gnu11' to the decompressor and purgatory CFLAGS to eliminate these errors and make the C standard version of these areas match the rest of the kernel. Cc: stable@vger.kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20250122-s390-fix-std-for-gcc-15-v1-1-8b00cadee083@kernel.org Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-27Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "A small number of improvements all over the place: - vdpa/octeon support for multiple interrupts - virtio-pci support for error recovery - vp_vdpa support for notification with data - vhost/net fix to set num_buffers for spec compliance - virtio-mem now works with kdump on s390 And small cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (23 commits) virtio_blk: Add support for transport error recovery virtio_pci: Add support for PCIe Function Level Reset vhost/net: Set num_buffers for virtio 1.0 vdpa/octeon_ep: read vendor-specific PCI capability virtio-pci: define type and header for PCI vendor data vdpa/octeon_ep: handle device config change events vdpa/octeon_ep: enable support for multiple interrupts per device vdpa: solidrun: Replace deprecated PCI functions s390/kdump: virtio-mem kdump support (CONFIG_PROC_VMCORE_DEVICE_RAM) virtio-mem: support CONFIG_PROC_VMCORE_DEVICE_RAM virtio-mem: remember usable region size virtio-mem: mark device ready before registering callbacks in kdump mode fs/proc/vmcore: introduce PROC_VMCORE_DEVICE_RAM to detect device RAM ranges in 2nd kernel fs/proc/vmcore: factor out freeing a list of vmcore ranges fs/proc/vmcore: factor out allocating a vmcore range and adding it to a list fs/proc/vmcore: move vmcore definitions out of kcore.h fs/proc/vmcore: prefix all pr_* with "vmcore:" fs/proc/vmcore: disallow vmcore modifications while the vmcore is open fs/proc/vmcore: replace vmcoredd_mutex by vmcore_mutex fs/proc/vmcore: convert vmcore_cb_lock into vmcore_mutex ...
2025-01-27s390/kdump: virtio-mem kdump support (CONFIG_PROC_VMCORE_DEVICE_RAM)David Hildenbrand
Let's add support for including virtio-mem device RAM in the crash dump, setting NEED_PROC_VMCORE_DEVICE_RAM, and implementing elfcorehdr_fill_device_ram_ptload_elf64(). To avoid code duplication, factor out the code to fill a PT_LOAD entry. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20241204125444.1734652-13-david@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-01-26Merge tag 'mm-stable-2025-01-26-14-59' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "The various patchsets are summarized below. Plus of course many indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated: https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/ Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED) - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation - "Cleanup for memfd_create()" from Isaac Manjarres does that thing - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests" * tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits) mm/compaction: fix UBSAN shift-out-of-bounds warning s390/mm: add missing ctor/dtor on page table upgrade kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() tools: add VM_WARN_ON_VMG definition mm/damon/core: use str_high_low() helper in damos_wmark_wait_us() seqlock: add missing parameter documentation for raw_seqcount_try_begin() mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh mm/page_alloc: remove the incorrect and misleading comment zram: remove zcomp_stream_put() from write_incompressible_page() mm: separate move/undo parts from migrate_pages_batch() mm/kfence: use str_write_read() helper in get_access_type() selftests/mm/mkdirty: fix memory leak in test_uffdio_copy() kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags() selftests/mm: virtual_address_range: avoid reading from VM_IO mappings selftests/mm: vm_util: split up /proc/self/smaps parsing selftests/mm: virtual_address_range: unmap chunks after validation selftests/mm: virtual_address_range: mmap() without PROT_WRITE selftests/memfd/memfd_test: fix possible NULL pointer dereference mm: add FGP_DONTCACHE folio creation flag mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue ...
2025-01-26Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Mainly individually changelogged singleton patches. The patch series in this pull are: - "lib min_heap: Improve min_heap safety, testing, and documentation" from Kuan-Wei Chiu provides various tightenings to the min_heap library code - "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some cleanup and Rust preparation in the xarray library code - "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes pathnames in some code comments - "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the new secs_to_jiffies() in various places where that is appropriate - "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen switches two filesystems to the new mount API - "Convert ocfs2 to use folios" from Matthew Wilcox does that - "Remove get_task_comm() and print task comm directly" from Yafang Shao removes now-unneeded calls to get_task_comm() in various places - "squashfs: reduce memory usage and update docs" from Phillip Lougher implements some memory savings in squashfs and performs some maintainability work - "lib: clarify comparison function requirements" from Kuan-Wei Chiu tightens the sort code's behaviour and adds some maintenance work - "nilfs2: protect busy buffer heads from being force-cleared" from Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a corrupted image - "nilfs2: fix kernel-doc comments for function return values" from Ryusuke Konishi fixes some nilfs kerneldoc - "nilfs2: fix issues with rename operations" from Ryusuke Konishi addresses some nilfs BUG_ONs which syzbot was able to trigger - "minmax.h: Cleanups and minor optimisations" from David Laight does some maintenance work on the min/max library code - "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work on the xarray library code" * tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits) ocfs2: use str_yes_no() and str_no_yes() helper functions include/linux/lz4.h: add some missing macros Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent Xarray: remove repeat check in xas_squash_marks() Xarray: distinguish large entries correctly in xas_split_alloc() Xarray: move forward index correctly in xas_pause() Xarray: do not return sibling entries from xas_find_marked() ipc/util.c: complete the kernel-doc function descriptions gcov: clang: use correct function param names latencytop: use correct kernel-doc format for func params minmax.h: remove some #defines that are only expanded once minmax.h: simplify the variants of clamp() minmax.h: move all the clamp() definitions after the min/max() ones minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp() minmax.h: reduce the #define expansion of min(), max() and clamp() minmax.h: update some comments minmax.h: add whitespace around operators and after commas nilfs2: do not update mtime of renamed directory that is not moved nilfs2: handle errors that nilfs_prepare_chunk() may return CREDITS: fix spelling mistake ...
2025-01-26s390/bitops: Use correct constraint for arch_test_bit() inline assemblyHeiko Carstens
Use the "Q" instead of "R" constraint to correctly reflect the instruction format of the tm instruction: the first operand is a memory reference without index register and short displacement. The "R" constraint indicates a memory reference with index register instead. This may lead to compile errors like: arch/s390/include/asm/bitops.h: Assembler messages: arch/s390/include/asm/bitops.h:60: Error: operand 1: syntax error; missing ')' after base register arch/s390/include/asm/bitops.h:60: Error: operand 2: syntax error; ')' not allowed here arch/s390/include/asm/bitops.h:60: Error: junk at end of line: `,4' Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/r/20250122-s390-fix-std-for-gcc-15-v1-1-8b00cadee083@kernel.org Fixes: b2bc1b1a77c0 ("s390/bitops: Provide optimized arch_test_bit()") Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-26s390/pci: Fix SR-IOV for PFs initially in standbyNiklas Schnelle
Since commit 25f39d3dcb48 ("s390/pci: Ignore RID for isolated VFs") PFs which are not initially configured but in standby are considered isolated. That is they create only a single function PCI domain. Due to the PCI domains being created on discovery, this means that even if they are configured later on, sibling PFs and their child VFs will not be added to their PCI domain breaking SR-IOV expectations. The reason the referenced commit ignored standby PFs for the creation of multi-function PCI subhierarchies, was to work around a PCI domain renumbering scenario on reboot. The renumbering would occur after removing a previously in standby PF, whose domain number is used for its configured sibling PFs and their child VFs, but which itself remained in standby. When this is followed by a reboot, the sibling PF is used instead to determine the PCI domain number of it and its child VFs. In principle it is not possible to know which standby PFs will be configured later and which may be removed. The PCI domain and root bus are pre-requisites for hotplug slots so the decision of which functions belong to which domain can not be postponed. With the renumbering occurring only in rare circumstances and being generally benign, accept it as an oddity and fix SR-IOV for initially standby PFs simply by allowing them to create PCI domains. Cc: stable@vger.kernel.org Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com> Fixes: 25f39d3dcb48 ("s390/pci: Ignore RID for isolated VFs") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-26s390/futex: Avoid KMSAN instrumention for user pointersHeiko Carstens
Similar to commit eb6efdfeaeca ("s390/uaccess: add KMSAN support to put_user() and get_user()") disable KMSAN instrumention for futex inline assemblies, which contain dereferenced user pointers. With KMSAN instrumentation this would lead to accesses of shadows for user pointers, which should not happen. Handle the futex operations like they copy a value (old) from user space to kernel space. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-26s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inlineHeiko Carstens
Rename get_put_user_noinstr_attributes to a more generic uaccess_kmsan_or_inline name. This allows to use it for other non put_user()/get_user() uaccess functions withour causing confusion. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
generated by cgit (git 2.34.1) at 2025-06-12 17:13:00 +0000