summaryrefslogtreecommitdiff
path: root/arch/sh/Kconfig
AgeCommit message (Collapse)Author
2016-08-05sh: add SMP support for J2Rich Felker
Support is hooked up via a cpu start method specified in the device tree, and also depends on DT nodes that describe the interfaces for performing IPI and identifying which cpu execution is taking place on. The currently used method is a form of spin table, where secondary cpus are unblocked by writing to a special address. Signed-off-by: Rich Felker <dalias@libc.org>
2016-08-05sh: add support for J-Core J2 processorRich Felker
At the CPU/ISA level, the J2 is compatible with SH-2, and thus the changes to add J2 support build on existing SH-2 support. However, J2 does not duplicate the memory-mapped SH-2 features like the cache interface. Instead, the cache interfaces is described in the device tree, and new code is added to be able to access the flat device tree at early boot before it is unflattened. Support is also added for receiving interrupts on trap numbers in the range 16 to 31, since the J-Core aic1 interrupt controller generates these traps. This range was unused but nominally for hardware exceptions on SH-2, and a few values in this range were used for exceptions on SH-2A, but SH-2A has its own version of the relevant code. No individual cpu subtypes are added for J2 since the intent moving forward is to represent SoCs with device tree rather than as hard-coded subtypes in the kernel. The CPU_SUBTYPE_J2 Kconfig item exists only to fit into the existing cpu selection mechanism until it is overhauled. Signed-off-by: Rich Felker <dalias@libc.org>
2016-07-31sh: allow clocksource drivers to register sched_clock backendsRich Felker
There is no arch-specific sched_clock implementation for sh, resulting in use of the old default jiffies-based implementation. Instead, use the modern generic sched_clock framework so that drivers can register better backends. Signed-off-by: Rich Felker <dalias@libc.org>
2016-07-31sh: fix futex/robust_list on nommu modelsRich Felker
The futex cmpxchg runtime testing in kernel/futex.c depends on accesses to address 0 producing EFAULT, which obviously does not work on nommu. Since SH always has cmpxchg, disable the broken runtime detection. At some point this should be fixed at the kernel/futex.c level. UP machines can always provide a working cmpxchg with interrupt masking, and SMP cannot function without a working cmpxchg anyway. Signed-off-by: Rich Felker <dalias@libc.org>
2016-07-31sh: add support for linking a builtin device tree blob in the kernelRich Felker
Signed-off-by: Rich Felker <dalias@libc.org>
2016-06-08sh: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-20lib/GCD.c: use binary GCD algorithm instead of EuclideanZhaoxiu Zeng
The binary GCD algorithm is based on the following facts: 1. If a and b are all evens, then gcd(a,b) = 2 * gcd(a/2, b/2) 2. If a is even and b is odd, then gcd(a,b) = gcd(a/2, b) 3. If a and b are all odds, then gcd(a,b) = gcd((a-b)/2, b) = gcd((a+b)/2, b) Even on x86 machines with reasonable division hardware, the binary algorithm runs about 25% faster (80% the execution time) than the division-based Euclidian algorithm. On platforms like Alpha and ARMv6 where division is a function call to emulation code, it's even more significant. There are two variants of the code here, depending on whether a fast __ffs (find least significant set bit) instruction is available. This allows the unpredictable branches in the bit-at-a-time shifting loop to be eliminated. If fast __ffs is not available, the "even/odd" GCD variant is used. I use the following code to benchmark: #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <string.h> #include <time.h> #include <unistd.h> #define swap(a, b) \ do { \ a ^= b; \ b ^= a; \ a ^= b; \ } while (0) unsigned long gcd0(unsigned long a, unsigned long b) { unsigned long r; if (a < b) { swap(a, b); } if (b == 0) return a; while ((r = a % b) != 0) { a = b; b = r; } return b; } unsigned long gcd1(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); for (;;) { a >>= __builtin_ctzl(a); if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd2(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; for (;;) { while (!(a & r)) a >>= 1; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } unsigned long gcd3(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); if (b == 1) return r & -r; for (;;) { a >>= __builtin_ctzl(a); if (a == 1) return r & -r; if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd4(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; if (b == r) return r; for (;;) { while (!(a & r)) a >>= 1; if (a == r) return r; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } static unsigned long (*gcd_func[])(unsigned long a, unsigned long b) = { gcd0, gcd1, gcd2, gcd3, gcd4, }; #define TEST_ENTRIES (sizeof(gcd_func) / sizeof(gcd_func[0])) #if defined(__x86_64__) #define rdtscll(val) do { \ unsigned long __a,__d; \ __asm__ __volatile__("rdtsc" : "=a" (__a), "=d" (__d)); \ (val) = ((unsigned long long)__a) | (((unsigned long long)__d)<<32); \ } while(0) static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { unsigned long long start, end; unsigned long long ret; unsigned long gcd_res; rdtscll(start); gcd_res = gcd(a, b); rdtscll(end); if (end >= start) ret = end - start; else ret = ~0ULL - start + 1 + end; *res = gcd_res; return ret; } #else static inline struct timespec read_time(void) { struct timespec time; clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time); return time; } static inline unsigned long long diff_time(struct timespec start, struct timespec end) { struct timespec temp; if ((end.tv_nsec - start.tv_nsec) < 0) { temp.tv_sec = end.tv_sec - start.tv_sec - 1; temp.tv_nsec = 1000000000ULL + end.tv_nsec - start.tv_nsec; } else { temp.tv_sec = end.tv_sec - start.tv_sec; temp.tv_nsec = end.tv_nsec - start.tv_nsec; } return temp.tv_sec * 1000000000ULL + temp.tv_nsec; } static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { struct timespec start, end; unsigned long gcd_res; start = read_time(); gcd_res = gcd(a, b); end = read_time(); *res = gcd_res; return diff_time(start, end); } #endif static inline unsigned long get_rand() { if (sizeof(long) == 8) return (unsigned long)rand() << 32 | rand(); else return rand(); } int main(int argc, char **argv) { unsigned int seed = time(0); int loops = 100; int repeats = 1000; unsigned long (*res)[TEST_ENTRIES]; unsigned long long elapsed[TEST_ENTRIES]; int i, j, k; for (;;) { int opt = getopt(argc, argv, "n:r:s:"); /* End condition always first */ if (opt == -1) break; switch (opt) { case 'n': loops = atoi(optarg); break; case 'r': repeats = atoi(optarg); break; case 's': seed = strtoul(optarg, NULL, 10); break; default: /* You won't actually get here. */ break; } } res = malloc(sizeof(unsigned long) * TEST_ENTRIES * loops); memset(elapsed, 0, sizeof(elapsed)); srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); /* Do we have args? */ unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); unsigned long long min_elapsed[TEST_ENTRIES]; for (k = 0; k < repeats; k++) { for (i = 0; i < TEST_ENTRIES; i++) { unsigned long long tmp = benchmark_gcd_func(gcd_func[i], a, b, &res[j][i]); if (k == 0 || min_elapsed[i] > tmp) min_elapsed[i] = tmp; } } for (i = 0; i < TEST_ENTRIES; i++) elapsed[i] += min_elapsed[i]; } for (i = 0; i < TEST_ENTRIES; i++) printf("gcd%d: elapsed %llu\n", i, elapsed[i]); k = 0; srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); for (i = 1; i < TEST_ENTRIES; i++) { if (res[j][i] != res[j][0]) break; } if (i < TEST_ENTRIES) { if (k == 0) { k = 1; fprintf(stderr, "Error:\n"); } fprintf(stderr, "gcd(%lu, %lu): ", a, b); for (i = 0; i < TEST_ENTRIES; i++) fprintf(stderr, "%ld%s", res[j][i], i < TEST_ENTRIES - 1 ? ", " : "\n"); } } if (k == 0) fprintf(stderr, "PASS\n"); free(res); return 0; } Compiled with "-O2", on "VirtualBox 4.4.0-22-generic #38-Ubuntu x86_64" got: zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 10174 gcd1: elapsed 2120 gcd2: elapsed 2902 gcd3: elapsed 2039 gcd4: elapsed 2812 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9309 gcd1: elapsed 2280 gcd2: elapsed 2822 gcd3: elapsed 2217 gcd4: elapsed 2710 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9589 gcd1: elapsed 2098 gcd2: elapsed 2815 gcd3: elapsed 2030 gcd4: elapsed 2718 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9914 gcd1: elapsed 2309 gcd2: elapsed 2779 gcd3: elapsed 2228 gcd4: elapsed 2709 PASS [akpm@linux-foundation.org: avoid #defining a CONFIG_ variable] Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20printk/nmi: generic solution for safe printk in NMIPetr Mladek
printk() takes some locks and could not be used a safe way in NMI context. The chance of a deadlock is real especially when printing stacks from all CPUs. This particular problem has been addressed on x86 by the commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). The patchset brings two big advantages. First, it makes the NMI backtraces safe on all architectures for free. Second, it makes all NMI messages almost safe on all architectures (the temporary buffer is limited. We still should keep the number of messages in NMI context at minimum). Note that there already are several messages printed in NMI context: WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE handlers. These are not easy to avoid. This patch reuses most of the code and makes it generic. It is useful for all messages and architectures that support NMI. The alternative printk_func is set when entering and is reseted when leaving NMI context. It queues IRQ work to copy the messages into the main ring buffer in a safe context. __printk_nmi_flush() copies all available messages and reset the buffer. Then we could use a simple cmpxchg operations to get synchronized with writers. There is also used a spinlock to get synchronized with other flushers. We do not longer use seq_buf because it depends on external lock. It would be hard to make all supported operations safe for a lockless use. It would be confusing and error prone to make only some operations safe. The code is put into separate printk/nmi.c as suggested by Steven Rostedt. It needs a per-CPU buffer and is compiled only on architectures that call nmi_enter(). This is achieved by the new HAVE_NMI Kconfig flag. The are MN10300 and Xtensa architectures. We need to clean up NMI handling there first. Let's do it separately. The patch is heavily based on the draft from Peter Zijlstra, see https://lkml.org/lkml/2015/6/10/327 [arnd@arndb.de: printk-nmi: use %zu format string for size_t] [akpm@linux-foundation.org: min_t->min - all types are size_t here] Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part] Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Kosina <jkosina@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20exit_thread: remove empty bodiesJiri Slaby
Define HAVE_EXIT_THREAD for archs which want to do something in exit_thread. For others, let's define exit_thread as an empty inline. This is a cleanup before we change the prototype of exit_thread to accept a task parameter. [akpm@linux-foundation.org: fix mips] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-19Merge tag 'tag-sh-for-4.6' of git://git.libc.org/linux-shLinus Torvalds
Pull arch/sh updates from Rich Felker: "This includes minor cleanups, a fix for a crash that likely affects all sh models with MMU, and introduction of a framework for boards described by device tree, which sets the stage for future J2 support" * tag 'tag-sh-for-4.6' of git://git.libc.org/linux-sh: sched/preempt, sh: kmap_coherent relies on disabled preemption sh: add SMP method selection to device tree pseudo-board sh: add device tree support and generic board using device tree sh: remove arch-specific localtimer and use generic one sh: make MMU-specific SMP code conditional on CONFIG_MMU sh: provide unified syscall trap compatible with all SH models sh: New gcc support sh: Disable trace for kernel uncompressing. sh: Use generic clkdev.h header
2016-03-17sh: remove arch-specific localtimer and use generic oneRich Felker
The code being removed was copied from arm, where the corresponding code was removed in 2013. The only functional change should be that the rating of the dummy local timer changes from 400 to 100. Signed-off-by: Rich Felker <dalias@libc.org>
2016-03-08PCI: Include pci/hotplug Kconfig directly from pci/KconfigBjorn Helgaas
Include pci/hotplug/Kconfig directly from pci/Kconfig, so arches don't have to source both pci/Kconfig and pci/hotplug/Kconfig. Note that this effectively adds pci/hotplug/Kconfig to the following arches, because they already sourced drivers/pci/Kconfig but they previously did not source drivers/pci/hotplug/Kconfig: alpha arm avr32 frv m68k microblaze mn10300 sparc unicore32 Inspired-by-patch-from: Bogicevic Sasa <brutallesale@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: Include pci/pcie/Kconfig directly from pci/KconfigBogicevic Sasa
Include pci/pcie/Kconfig directly from pci/Kconfig, so arches don't have to source both pci/Kconfig and pci/pcie/Kconfig. Note that this effectively adds pci/pcie/Kconfig to the following arches, because they already sourced drivers/pci/Kconfig but they previously did not source drivers/pci/pcie/Kconfig: alpha avr32 blackfin frv m32r m68k microblaze mn10300 parisc sparc unicore32 xtensa [bhelgaas: changelog, source pci/pcie/Kconfig at top of pci/Kconfig, whitespace] Signed-off-by: Sasa Bogicevic <brutallesale@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-20dma-mapping: always provide the dma_map_ops based implementationChristoph Hellwig
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16Kconfig: remove HAVE_LATENCYTOP_SUPPORTWill Deacon
As illustrated by commit a3afe70b83fd ("[S390] latencytop s390 support."), HAVE_LATENCYTOP_SUPPORT is defined by an architecture to advertise an implementation of save_stack_trace_tsk. However, as of 9212ddb5eada ("stacktrace: provide save_stack_trace_tsk() weak alias") a dummy implementation is provided if STACKTRACE=y. Given that LATENCYTOP already depends on STACKTRACE_SUPPORT and selects STACKTRACE, we can remove HAVE_LATENCYTOP_SUPPORT altogether. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Helge Deller <deller@gmx.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10kexec: split kexec_load syscall from kexec core codeDave Young
There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14sh: expose number of page table levelsKirill A. Shutemov
We would want to use number of page table level to define mm_struct. Let's expose it as CONFIG_PGTABLE_LEVELS. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-sh@vger.kernel.org Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10sh: build superh without CONFIG_EXPERTRob Landley
What sh4 actually wants is HAVE_PATA_PLATFORM, so select that instead. Signed-off-by: Rob Landley <rob@landley.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-19PM: Eliminate CONFIG_PM_RUNTIMERafael J. Wysocki
Having switched over all of the users of CONFIG_PM_RUNTIME to use CONFIG_PM directly, turn the latter into a user-selectable option and drop the former entirely from the tree. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org>
2014-12-13gcov: enable GCOV_PROFILE_ALL from ARCH KconfigsRiku Voipio
Following the suggestions from Andrew Morton and Stephen Rothwell, Dont expand the ARCH list in kernel/gcov/Kconfig. Instead, define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures can enable. set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was previously allowed + ARM64 which I tested. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-04PM / Kconfig: Do not select PM directly from Kconfig filesRafael J. Wysocki
It is not valid to select CONFIG_PM directly without selecting CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME too, because that breaks dependencies (ia64 does that) and it is not necessary to select CONFIG_PM directly if CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is selected, because CONFIG_PM will be set automatically in that case (sh does that). Fix those mistakes. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-29kexec: remove CONFIG_KEXEC dependency on cryptoVivek Goyal
New system call depends on crypto. As it did not have a separate config option, CONFIG_KEXEC was modified to select CRYPTO and CRYPTO_SHA256. But now previous patch introduced a new config option for new syscall. So CONFIG_KEXEC does not require crypto. Remove that dependency. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-22sh: intc: Confine SH_INTC to platforms that need itGeert Uytterhoeven
Currently the sh-intc driver is compiled on all SuperH and non-multiplatform SH-Mobile platforms, while it's only used on a limited number of platforms: - SuperH: SH2(A), SH3(A), SH4(A)(L) (all but SH5) - ARM: sh7372, sh73a0 Drop the "default y" on SH_INTC, make all CPU platforms that use it select it, and protect all sub-options by "if SH_INTC" to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-08kexec: load and relocate purgatory at kernel load timeVivek Goyal
Load purgatory code in RAM and relocate it based on the location. Relocation code has been inspired by module relocation code and purgatory relocation code in kexec-tools. Also compute the checksums of loaded kexec segments and store them in purgatory. Arch independent code provides this functionality so that arch dependent bootloaders can make use of it. Helper functions are provided to get/set symbol values in purgatory which are used by bootloaders later to set things like stack and entry point of second kernel etc. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-18sh: ftrace: Remove check of obsolete variable function_trace_stopSteven Rostedt (Red Hat)
Nothing sets function_trace_stop to disable function tracing anymore. Remove the check for it in the arch code. [ Please test this on your arch ] Cc: Matt Fleming <matt@console-pimps.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-12Merge git://git.infradead.org/users/eparis/auditLinus Torvalds
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
2014-04-07Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAPUwe Kleine-König
If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-01Merge tag 'usb-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big USB pull request for 3.15-rc1. The normal set of patches, lots of controller driver updates, and a smattering of individual USB driver updates as well. All have been in linux-next for a while" * tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits) xhci: Transition maintainership to Mathias Nyman. USB: disable reset-resume when USB_QUIRK_RESET is set USB: unbind all interfaces before rebinding any usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210 usb: gadget: tcm_usb_gadget: stop format strings usb: gadget: f_fs: add missing spinlock and mutex unlock usb: gadget: composite: switch over to ERR_CAST() usb: gadget: inode: switch over to memdup_user() usb: gadget: f_subset: switch over to PTR_RET usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence USB: keyspan: remove dead debugging code USB: serial: add missing newlines to dev_<level> messages. USB: serial: add missing braces USB: serial: continue to write on errors USB: serial: continue to read on errors USB: serial: make bulk_out_size a lower limit USB: cypress_m8: fix potential scheduling while atomic devicetree: bindings: document lsi,zevio-usb usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs ...
2014-03-20audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALLAKASHI Takahiro
Currently AUDITSYSCALL has a long list of architecture depencency: depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA) The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL for simplicity. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> (arm) Acked-by: Richard Guy Briggs <rgb@redhat.com> (audit) Acked-by: Matt Turner <mattst88@gmail.com> (alpha) Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Eric Paris <eparis@redhat.com>
2014-03-11sh: Remove Kconfig entries for TMU, CMT and MTU2Magnus Damm
Now when drivers/clocksource/Kconfig has been updated with entires for CMT, TMU and MTU2 it is safe to remove these from SH. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-18usb: host: remove selects of USB_ARCH_HAS_?HCIPaul Bolle
USB_ARCH_HAS_EHCI, USB_ARCH_HAS_OHCI, and USB_ARCH_HAS_XHCI were just removed. Selecting them is a nop. The select statements for these symbols can be removed too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-23Kconfig: update flightly outdated CONFIG_SMP documentationRobert Graffham
Remove an outdated reference to "most personal computers" having only one CPU, and change the use of "singleprocessor" and "single processor" in CONFIG_SMP's documentation to "uniprocessor" across all arches where that documentation is present. Signed-off-by: Robert Graffham <psquid@psquid.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-20stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architecturesKees Cook
Instead of duplicating the CC_STACKPROTECTOR Kconfig and Makefile logic in each architecture, switch to using HAVE_CC_STACKPROTECTOR and keep everything in one place. This retains the x86-specific bug verification scripts. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-15Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds
Pull Kconfig cleanups from Mark Salter: "Remove some unused config options from C6X and clean up PC_PARPORT dependencies. The latter was discussed here: https://lkml.org/lkml/2013/10/8/12" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: c6x: remove unused COMMON_CLKDEV Kconfig parameter Kconfig cleanup (PARPORT_PC dependencies) x86: select ARCH_MIGHT_HAVE_PC_PARPORT unicore32: select ARCH_MIGHT_HAVE_PC_PARPORT sparc: select ARCH_MIGHT_HAVE_PC_PARPORT sh: select ARCH_MIGHT_HAVE_PC_PARPORT powerpc: select ARCH_MIGHT_HAVE_PC_PARPORT parisc: select ARCH_MIGHT_HAVE_PC_PARPORT mips: select ARCH_MIGHT_HAVE_PC_PARPORT microblaze: select ARCH_MIGHT_HAVE_PC_PARPORT m68k: select ARCH_MIGHT_HAVE_PC_PARPORT ia64: select ARCH_MIGHT_HAVE_PC_PARPORT arm: select ARCH_MIGHT_HAVE_PC_PARPORT alpha: select ARCH_MIGHT_HAVE_PC_PARPORT c6x: remove unused parameter in Kconfig
2013-11-15kernel: remove CONFIG_USE_GENERIC_SMP_HELPERSChristoph Hellwig
We've switched over every architecture that supports SMP to it, so remove the new useless config variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-23sh: select ARCH_MIGHT_HAVE_PC_PARPORTMark Salter
Architectures which support CONFIG_PARPORT_PC should select ARCH_MIGHT_HAVE_PC_PARPORT. Signed-off-by: Mark Salter <msalter@redhat.com> CC: Paul Mundt <lethal@linux-sh.org> CC: linux-sh@vger.kernel.org
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-22Kconfig: Remove hotplug enable hints in CONFIG_KEXEC help textsGeert Uytterhoeven
commit 40b313608ad4ea655addd2ec6cdd106477ae8e15 ("Finally eradicate CONFIG_HOTPLUG") removed remaining references to CONFIG_HOTPLUG, but missed a few plain English references in the CONFIG_KEXEC help texts. Remove them, too. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03Finally eradicate CONFIG_HOTPLUGStephen Rothwell
Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"), it has been basically impossible to build a kernel with CONFIG_HOTPLUG turned off. Remove all the remaining references to it. Cc: Russell King <linux@arm.linux.org.uk> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-04-30Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
2013-04-17idle: Remove GENERIC_IDLE_LOOP config switchThomas Gleixner
All archs are converted over. Remove the config switch and the fallback code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-16Remove GENERIC_GPIO config optionAlexandre Courbot
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-10idle: Remove unused ARCH_HAS_DEFAULT_IDLEPaul Bolle
The Kconfig symbol ARCH_HAS_DEFAULT_IDLE is unused. Commit a0bfa1373859e9d11dc92561a8667588803e42d8 ("cpuidle: stop depending on pm_idle") removed the only place were it was actually used. But it did not remove its Kconfig entries (for sh and x86). Remove those two entries now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Len Brown <len.brown@intel.com> Cc: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/1363869683.1390.134.camel@x61.thuisdomein Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-10cpufreq: sh: move cpufreq driver to drivers/cpufreqViresh Kumar
This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08sh: Use generic idle loopThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/20130321215235.216323644@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-27arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUSStephen Rothwell
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull signal handling cleanups from Al Viro: "This is the first pile; another one will come a bit later and will contain SYSCALL_DEFINE-related patches. - a bunch of signal-related syscalls (both native and compat) unified. - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE (fixing several potential problems with missing argument validation, while we are at it) - a lot of now-pointless wrappers killed - a couple of architectures (cris and hexagon) forgot to save altstack settings into sigframe, even though they used the (uninitialized) values in sigreturn; fixed. - microblaze fixes for delivery of multiple signals arriving at once - saner set of helpers for signal delivery introduced, several architectures switched to using those." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits) x86: convert to ksignal sparc: convert to ksignal arm: switch to struct ksignal * passing alpha: pass k_sigaction and siginfo_t using ksignal pointer burying unused conditionals make do_sigaltstack() static arm64: switch to generic old sigaction() (compat-only) arm64: switch to generic compat rt_sigaction() arm64: switch compat to generic old sigsuspend arm64: switch to generic compat rt_sigqueueinfo() arm64: switch to generic compat rt_sigpending() arm64: switch to generic compat rt_sigprocmask() arm64: switch to generic sigaltstack sparc: switch to generic old sigsuspend sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE sparc: kill sign-extending wrappers for native syscalls kill sparc32_open() sparc: switch to use of generic old sigaction sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE mips: switch to generic sys_fork() and sys_clone() ...
2013-02-21Merge tag 'sh-pinmux' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sh-mobile pinctrl conversion from Arnd Bergmann: "This is another cleanup series, containing the move of the Renesas SH-Mobile pin controller code from arch/arm/mach-shmobile over to the generic pinctrl subsystem, changing it over to the common interfaces in the process. Based on agreement between Olof, Paul Mundt, Linus Walleij and Simon, we're merging this large branch of pinctrl conversion through arm-soc, even though it contains the corresponding conversions for arch/sh. Main reason for this is tight dependencies (that will now mostly be broken) between the arch/sh and mach-shmobile implementations. There will be more of this in 3.10 to do device-tree bindings, but this is the initial conversion." * tag 'sh-pinmux' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (81 commits) sh-pfc: sh_pfc_probe() sizeof() fix sh-pfc: Move sh_pfc.h from include/linux/ to driver directory sh-pfc: Remove pinmux_info definition sh: Remove unused sh_pfc_register_info() function sh: shx3: pinmux: Use driver-provided pinmux info sh: sh7786: pinmux: Use driver-provided pinmux info sh: sh7785: pinmux: Use driver-provided pinmux info sh: sh7757: pinmux: Use driver-provided pinmux info sh: sh7734: pinmux: Use driver-provided pinmux info sh: sh7724: pinmux: Use driver-provided pinmux info sh: sh7723: pinmux: Use driver-provided pinmux info sh: sh7722: pinmux: Use driver-provided pinmux info sh: sh7720: pinmux: Use driver-provided pinmux info sh: sh7269: pinmux: Use driver-provided pinmux info sh: sh7264: pinmux: Use driver-provided pinmux info sh: sh7203: pinmux: Use driver-provided pinmux info ARM: shmobile: sh73a0: Use driver-provided pinmux info ARM: shmobile: sh7372: Use driver-provided pinmux info ARM: shmobile: r8a7779: Use driver-provided pinmux info ARM: shmobile: r8a7740: Use driver-provided pinmux info ...
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...