| Age | Commit message (Collapse) | Author |
|---|
|
smp_text_poke_sync_each_cpu()
Missed this UML wrapper in the rename.
Fixes: 6e4955a9d73e ("x86/alternatives: Rename 'text_poke_sync()' to 'smp_text_poke_sync_each_cpu()'")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/202504141003.kc69fVoj-lkp@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
- proper nofault accesses and read-only rodata
- hostfs fix for host inode number reuse
- fixes for host errno handling
- various cleanups/small fixes
* tag 'uml-for-linux-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Rewrite the sigio workaround based on epoll and tgkill
um: Prohibit the VM_CLONE flag in run_helper_thread()
um: Switch to the pthread-based helper in sigio workaround
um: ubd: Switch to the pthread-based helper
um: Add pthread-based helper support
um: x86: clean up elf specific definitions
um: Store full CSGSFS and SS register from mcontext
um: virt-pci: Refactor virtio_pcidev into its own module
um: work around sched_yield not yielding in time-travel mode
um/locking: Remove semicolon from "lock" prefix
um: Update min_low_pfn to match changes in uml_reserved
um: use str_yes_no() to remove hardcoded "yes" and "no"
um: hostfs: avoid issues on inode number reuse by host
um: Allocate vdso page pointer statically
um: remove copy_from_kernel_nofault_allowed
um: mark rodata read-only and implement _nofault accesses
um: Pass the correct Rust target and options with gcc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
Remove hard-coded strings by using the str_yes_no() helper function
provided by <linux/string_choices.h>.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Link: https://patch.msgid.link/20250220-um_yes_no-v1-1-2a355ed2d225@ethancedwards.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
high_memory defines upper bound on the directly mapped memory. This bound
is defined by the beginning of ZONE_HIGHMEM when a system has high memory
and by the end of memory otherwise.
All this is known to generic memory management initialization code that
can set high_memory while initializing core mm structures.
Add a generic calculation of high_memory to free_area_init() and remove
per-architecture calculation except for the architectures that set and use
high_memory earlier than that.
Link: https://lkml.kernel.org/r/20250313135003.836600-11-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
max_mapnr is essentially the size of the memory map for systems that use
FLATMEM. There is no reason to calculate it in each and every architecture
when it's anyway calculated in alloc_node_mem_map().
Drop setting of max_mapnr from architecture code and set it once in
alloc_node_mem_map().
While on it, move definition of mem_map and max_mapnr to mm/mm_init.c so
there won't be two copies for MMU and !MMU variants.
Link: https://lkml.kernel.org/r/20250313135003.836600-10-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The module code does not create a writable copy of the executable memory
anymore so there is no need to handle it in module relocation and
alternatives patching.
This reverts commit 9bfc4824fd4836c16bb44f922bfaffba5da3e4f3.
Signed-off-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250126074733.1384926-8-rppt@kernel.org
|
|
It's only invoked during boot from linux_main().
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241128083137.2219830-4-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It's only invoked during boot from get_host_cpu_features().
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241128083137.2219830-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It's only invoked during boot from get_host_cpu_features().
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241128083137.2219830-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When calculating max_physmem, we've already factored in the space
used by iomem. We don't need to subtract it again.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241128081939.2216246-4-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Lots of cleanups, mostly from Benjamin Berg and Tiwei Bie
- Removal of unused code
- Fix for sparse warnings
- Cleanup around stub_exe()
* tag 'uml-for-linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (68 commits)
hostfs: Fix the NULL vs IS_ERR() bug for __filemap_get_folio()
um: move thread info into task
um: Always dump trace for specified task in show_stack
um: vector: Do not use drvdata in release
um: net: Do not use drvdata in release
um: ubd: Do not use drvdata in release
um: ubd: Initialize ubd's disk pointer in ubd_add
um: virtio_uml: query the number of vqs if supported
um: virtio_uml: fix call_fd IRQ allocation
um: virtio_uml: send SET_MEM_TABLE message with the exact size
um: remove broken double fault detection
um: remove duplicate UM_NSEC_PER_SEC definition
um: remove file sync for stub data
um: always include kconfig.h and compiler-version.h
um: set DONTDUMP and DONTFORK flags on KASAN shadow memory
um: fix sparse warnings in signal code
um: fix sparse warnings from regset refactor
um: Remove double zero check
um: fix stub exe build with CONFIG_GCOV
um: Use os_set_pdeathsig helper in winch thread/process
...
|
|
This selects the THREAD_INFO_IN_TASK option for UM and changes the way
that the current task is discovered. This is trivial though, as UML
already tracks the current task in cpu_tasks[] and this can be used to
retrieve it.
Also remove the signal handler code that copies the thread information
into the IRQ stack. It is obsolete now, which also means that the
mentioned race condition cannot happen anymore.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Hajime Tazaki <thehajime@gmail.com>
Link: https://patch.msgid.link/20241111102910.46512-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When module text memory will be allocated with ROX permissions, the memory
at the actual address where the module will live will contain invalid
instructions and there will be a writable copy that contains the actual
module code.
Update relocations and alternatives patching to deal with it.
[rppt@kernel.org: fix writable address in cfi_rewrite_endbr()]
Link: https://lkml.kernel.org/r/ZysRwR29Ji8CcbXc@kernel.org
Link: https://lkml.kernel.org/r/20241023162711.2579610-7-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several architectures support text patching, but they name the header
files that declare patching functions differently.
Make all such headers consistently named text-patching.h and add an empty
header in asm-generic for architectures that do not support text patching.
Link: https://lkml.kernel.org/r/20241023162711.2579610-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The PTRACE_GETREGSET API has now existed since Linux 2.6.33. The XSAVE
CPU feature should also be sufficiently common to be able to rely on it.
With this, define our internal FP state to be the hosts XSAVE data. Add
discovery for the hosts XSAVE size and place the FP registers at the end
of task_struct so that we can adjust the size at runtime.
Next we can implement the regset API on top and update the signal
handling as well as ptrace APIs to use them. Also switch coredump
creation to use the regset API and finally set HAVE_ARCH_TRACEHOOK.
This considerably improves the signal frames. Previously they might not
have contained all the registers (i386) and also did not have the
sizes and magic values set to the correct values to permit userspace to
decode the frame.
As a side effect, this will permit UML to run on hosts with newer CPU
extensions (such as AMX) that need even more register state.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241023094120.4083426-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It does nothing but emit a warning when 'debug' is provided in the
kernel command line. It can be a bit annoying, as 'debug' is also a
valid kernel parameter to enable kernel debugging.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When loading the UML binary, the host kernel will place the stack at the
highest possible address. It will then map the program name and
environment variables onto the start of the stack.
As such, an easy way to figure out the host_task_size is to use the
highest pointer to an environment variable as a reference.
Ensure that this works by disabling address layout randomization and
re-executing UML in case it was enabled.
This increases the available TASK_SIZE for 64 bit UML considerably.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-9-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We may have a TASK_SIZE from the host that is bigger than UML is able to
address with a three-level pagetable on 64-bit. Guard against that by
clipping the maximum TASK_SIZE to the maximum addressable area.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-8-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead of using the current stack pointer, we can also use the current
instruction to calculate where the stub data is. With this the stub data
only needs to be aligned to a full page boundary.
Changing this has the advantage that we do not have a hole in the memory
space above the stub data (which would need to be explicitly cleared).
Another motivation to do this is that with the planned addition of a
SECCOMP based userspace the stack pointer may not be fully trustworthy.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-7-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently physmem_size is defined as long long but declared locally
as unsigned long long before using it in separate .c files. Make them
match by defining physmem_size as unsigned long long and also move
the declaration to a common header to allow the compiler to check it.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-5-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Highmem was only supported on UML/i386. And the support has been
removed by commit a98a6d864d3b ("um: Remove broken highmem support").
Remove the leftovers and stop UML from trying to setup highmem when
the sum of physmem_size and iomem_size exceeds max_physmem.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-4-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It's no longer used. And uml_ncpus_setup doesn't exist anymore.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240527134024.1539848-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The prototypes for text_poke* are declared in asm/text-patching.h
under arch/x86/include/. It's safe to include this header, as it's
UML-aware (by checking CONFIG_UML_X86).
This will address below -Wmissing-prototypes warnings:
arch/um/kernel/um_arch.c:461:7: warning: no previous prototype for ‘text_poke’ [-Wmissing-prototypes]
arch/um/kernel/um_arch.c:473:6: warning: no previous prototype for ‘text_poke_sync’ [-Wmissing-prototypes]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current name doesn't reflect what it does very well.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lkml.kernel.org/r/20230622144321.427441595%40infradead.org
|
|
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230613224545.493148694@linutronix.de
|
|
There's a lot of code here that hard-codes that the
data is a single page, and right now that seems to
be sufficient, but to make it easier to change this
in the future, add a new STUB_DATA_PAGES constant
and use it throughout the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Match the x86 implementation to improve build errors.
Noticed when building allyesconfig.
e.g.
../arch/um/include/asm/processor-generic.h:94:19: error: called object is not a function or function pointer
94 | #define cpu_data (&boot_cpu_data)
| ~^~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:2157:16: note: in expansion of macro ‘cpu_data’
2157 | return cpu_data(first_cpu_of_numa_node).apicid;
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Implement an alternative CFI scheme that merges both the fine-grained
nature of kCFI but also takes full advantage of the coarse grained
hardware CFI as provided by IBT.
To contrast:
kCFI is a pure software CFI scheme and relies on being able to read
text -- specifically the instruction *before* the target symbol, and
does the hash validation *before* doing the call (otherwise control
flow is compromised already).
FineIBT is a software and hardware hybrid scheme; by ensuring every
branch target starts with a hash validation it is possible to place
the hash validation after the branch. This has several advantages:
o the (hash) load is avoided; no memop; no RX requirement.
o IBT WAIT-FOR-ENDBR state is a speculation stop; by placing
the hash validation in the immediate instruction after
the branch target there is a minimal speculation window
and the whole is a viable defence against SpectreBHB.
o Kees feels obliged to mention it is slightly more vulnerable
when the attacker can write code.
Obviously this patch relies on kCFI, but additionally it also relies
on the padding from the call-depth-tracking patches. It uses this
padding to place the hash-validation while the call-sites are
re-written to modify the indirect target to be 16 bytes in front of
the original target, thus hitting this new preamble.
Notably, there is no hardware that needs call-depth-tracking (Skylake)
and supports IBT (Tigerlake and onwards).
Suggested-by: Joao Moreira (Intel) <joao@overdrivepizza.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221027092842.634714496@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Move to strscpy()
- Improve panic notifiers
- Fix NR_CPUS usage
- Fixes for various comments
- Fixes for virtio driver
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
uml: Remove the initialization of statics to 0
um: Do not initialise statics to 0.
um: Fix comment typo
um: Improve panic notifiers consistency and ordering
um: remove unused reactivate_chan() declaration
um: mmaper: add __exit annotations to module exit funcs
um: virt-pci: add __init/__exit annotations to module init/exit funcs
hostfs: move from strlcpy with unused retval to strscpy
um: move from strlcpy with unused retval to strscpy
um: increase default virtual physical memory to 64 MiB
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
um: read multiple msg from virtio slave request fd
|
|
Currently the panic notifiers from user mode linux don't follow
the convention for most of the other notifiers present in the
kernel (indentation, priority setting, numeric return).
More important, the priorities could be improved, since it's a
special case (userspace), hence we could run the notifiers earlier;
user mode linux shouldn't care much with other panic notifiers but
the ordering among the mconsole and arch notifier is important,
given that the arch one effectively triggers a core dump.
Fix that by running the mconsole notifier as the first panic
notifier, followed by the architecture one (that coredumps).
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
V3:
- No changes.
V2:
- Kept the notifier header to avoid implicit usage - thanks
Johannes for the suggestion!
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The current 32 MiB of RAM causes OOMs to appear shortly after
booting in a minimal OpenWrt 22.03 configuration with a
5.10.134 kernel.
Of course, passing a "mem=64M" (from the --help text) parameter
works too, but it produces the following (info) message:
| [ 0.000000] Unknown kernel command line parameters "mem=64M", will be passed to user space.
That's why, I think it would be nicer, if this is working out
of the box again :).
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
OpenWrt's UML with 5.15 was producing odd errors/warnings during preinit
part of the early userspace portion:
|[ 0.000000] Kernel command line: ubd0=root.img root=98:0 console=tty
|[...]
|[ 0.440000] random: jshn: uninitialized urandom read (4 bytes read)
|[ 0.460000] random: jshn: uninitialized urandom read (4 bytes read)
|/etc/preinit: line 47: can't create /dev/tty: No such device or address
|/etc/preinit: line 48: can't create /dev/tty: No such device or address
|/etc/preinit: line 58: can't open /dev/tty: No such device or address
|[...] repeated many times
That "/dev/tty" came from the command line (which is automatically
added if no console= parameter was specified for the uml binary).
The TLDP project tells the following about the /dev/tty:
<https://tldp.org/HOWTO/Text-Terminal-HOWTO-7.html#ss7.3>
| /dev/tty stands for the controlling terminal (if any) for the current
| process.[...]
| /dev/tty is something like a link to the actually terminal device[..]
The "(if any)" is important here, since it's possible for processes to
not have a controlling terminal.
I think this was a simple typo and the author wanted tty0 there.
CC: Thomas Meyer <thomas@m3y3r.de>
Fixes: d7ffac33631b ("um: stdio_console: Make preferred console")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
[ 3.052463] ------------[ cut here ]------------
[ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[ 3.070072] Modules linked in: efivarfs autofs4
[ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000
[ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[ 3.195868] ...
[ 3.199917] Call Trace:
[ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[ 3.217625] [<900000000023d268>] __warn+0xd0/0x100
[ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[ 3.281824] ---[ end trace 8b484262b4b8c24c ]---
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Though there's been a decent amount of RNG-related development during
this last cycle, not all of it is coming through this tree, as this
cycle saw a shift toward tackling early boot time seeding issues,
which took place in other trees as well.
Here's a summary of the various patches:
- The CONFIG_ARCH_RANDOM .config option and the "nordrand" boot
option have been removed, as they overlapped with the more widely
supported and more sensible options, CONFIG_RANDOM_TRUST_CPU and
"random.trust_cpu". This change allowed simplifying a bit of arch
code.
- x86's RDRAND boot time test has been made a bit more robust, with
RDRAND disabled if it's clearly producing bogus results. This would
be a tip.git commit, technically, but I took it through random.git
to avoid a large merge conflict.
- The RNG has long since mixed in a timestamp very early in boot, on
the premise that a computer that does the same things, but does so
starting at different points in wall time, could be made to still
produce a different RNG state. Unfortunately, the clock isn't set
early in boot on all systems, so now we mix in that timestamp when
the time is actually set.
- User Mode Linux now uses the host OS's getrandom() syscall to
generate a bootloader RNG seed and later on treats getrandom() as
the platform's RDRAND-like faculty.
- The arch_get_random_{seed_,}_long() family of functions is now
arch_get_random_{seed_,}_longs(), which enables certain platforms,
such as s390, to exploit considerable performance advantages from
requesting multiple CPU random numbers at once, while at the same
time compiling down to the same code as before on platforms like
x86.
- A small cleanup changing a cmpxchg() into a try_cmpxchg(), from
Uros.
- A comment spelling fix"
More info about other random number changes that come in through various
architecture trees in the full commentary in the pull request:
https://lore.kernel.org/all/20220731232428.2219258-1-Jason@zx2c4.com/
* tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: correct spelling of "overwrites"
random: handle archrandom with multiple longs
um: seed rng using host OS rng
random: use try_cmpxchg in _credit_init_bits
timekeeping: contribute wall clock to rng on time change
x86/rdrand: Remove "nordrand" flag in favor of "random.trust_cpu"
random: remove CONFIG_ARCH_RANDOM
|
|
UML generally does not provide access to special CPU instructions like
RDRAND, and execution tends to be rather deterministic, with no real
hardware interrupts, making good randomness really very hard, if not
all together impossible. Not only is this a security eyebrow raiser, but
it's also quite annoying when trying to do various pieces of UML-based
automation that takes a long time to boot, if ever.
Fix this by trivially calling getrandom() in the host and using that
seed as "bootloader randomness", which initializes the rng immediately
at UML boot.
The old behavior can be restored the same way as on any other arch, by
way of CONFIG_TRUST_BOOTLOADER_RANDOMNESS=n or
random.trust_bootloader=0. So seen from that perspective, this just
makes UML act like other archs, which is positive in its own right.
Additionally, wire up arch_get_random_{int,long}() in the same way, so
that reseeds can also make use of the host RNG, controllable by
CONFIG_TRUST_CPU_RANDOMNESS and random.trust_cpu, per usual.
Cc: stable@vger.kernel.org
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Implement apply_returns() stub for UM, just like all the other patching
routines.
Fixes: 15e67227c49a ("x86: Undo return-thunk damage")
Reported-by: Randy Dunlap <rdunlap@infradead.org)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/Ys%2Ft45l%2FgarIrD0u@worktop.programming.kicks-ass.net
|
|
Objtool's --ibt option generates .ibt_endbr_seal which lists
superfluous ENDBR instructions. That is those instructions for which
the function is never indirectly called.
Overwrite these ENDBR instructions with a NOP4 such that these
function can never be indirect called, reducing the number of viable
ENDBR targets in the kernel.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.822545231@infradead.org
|
|
Add a dtb=<filename> option to boot UML with a devicetree blob. This
can be used for testing driver code using UML.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
[rw: Add dependency on CONFIG_OF]
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Rewrite retpoline thunk call sites to be indirect calls for
spectre_v2=off. This ensures spectre_v2=off is as near to a
RETPOLINE=n build as possible.
This is the replacement for objtool writing alternative entries to
ensure the same and achieves feature-parity with the previous
approach.
One noteworthy feature is that it relies on the thunks to be in
machine order to compute the register index.
Specifically, this does not yet address the Jcc __x86_indirect_thunk_*
calls generated by clang, a future patch will add this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20211026120310.232495794@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Support for optimized routines based on the host CPU
- Support for PCI via virtio
- Various fixes
* tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: remove unneeded semicolon in um_arch.c
um: Remove the repeated declaration
um: fix error return code in winch_tramp()
um: fix error return code in slip_open()
um: Fix stack pointer alignment
um: implement flush_cache_vmap/flush_cache_vunmap
um: add a UML specific futex implementation
um: enable the use of optimized xor routines in UML
um: Add support for host CPU flags and alignment
um: allow not setting extra rpaths in the linux binary
um: virtio/pci: enable suspend/resume
um: add PCI over virtio emulation driver
um: irqs: allow invoking time-travel handler multiple times
um: time-travel/signals: fix ndelay() in interrupt
um: expose time-travel mode to userspace side
um: export signals_enabled directly
um: remove unused smp_sigio_handler() declaration
lib: add iomem emulation (logic_iomem)
um: allow disabling NO_IOMEM
|
|
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix following coccicheck warning:
./arch/um/kernel/um_arch.c:284:34-35: Unneeded semicolon
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
1. Reflect host cpu flags into the UML instance so they can
be used to select the correct implementations for xor, crypto, etc.
2. Reflect host cache alignment into UML instance. This is
important when running 32 bit on a 64 bit host as 32 bit by
default aligns to 32 while the actual alignment should be 64.
Ditto for some Xeons which align at 128.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This mostly reverts the old commit 3963333fe676 ("uml: cover stubs
with a VMA") which had added a VMA to the existing PTEs. However,
there's no real reason to have the PTEs in the first place and the
VMA cannot be 'fixed' in place, which leads to bugs that userspace
could try to unmap them and be forcefully killed, or such. Also,
there's a bit of an ugly hole in userspace's address space.
Simplify all this: just install the stub code/page at the top of
the (inner) address space, i.e. put it just above TASK_SIZE. The
pages are simply hard-coded to be mapped in the userspace process
we use to implement an mm context, and they're out of reach of the
inner mmap/munmap/mprotect etc. since they're above TASK_SIZE.
Getting rid of the VMA also makes vma_merge() no longer hit one of
the VM_WARN_ON()s there because we installed a VMA while the code
assumes the stack VMA is the first one.
It also removes a lockdep warning about mmap_sem usage since we no
longer have uml_setup_stubs() and thus no longer need to do any
manipulation that would require mmap_sem in activate_mm().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The addition of the "ttynull" console driver did break the ordering of the
UML stdio console driver.
The UML stdio console driver is added in late_initcall (7), whereby the
ttynull driver is added in device_initcall (6), which always does make the
ttynull driver the default console.
Fix it by explicitly adding the UML stdio console as the preferred console,
in case no 'console=' command line option was specified.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
uml_pm_wake() is unconditionally called from the SIGUSR1 wakeup
handler since that's in the userspace portion of UML, and thus
a bit tricky to ifdef out. Since pm_system_wakeup() can always
be called (but may be an empty inline), also simply always have
uml_pm_wake() to fix the build.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
With all the previous bits in place, we can now also support
suspend to RAM, in the sense that everything is suspended,
not just most, including userspace, processes like in s2idle.
Since um_idle_sleep() now waits forever, we can simply call
that to "suspend" the system.
As before, you can wake it up using SIGUSR1 since we're just
in a pause() call that only needs to return.
In order to implement selective resume from certain devices,
and not have any arbitrary device interrupt wake up, suspend
interrupts by removing SIGIO notification (O_ASYNC) from all
the FDs that are not supposed to wake up the system. However,
swap out the handler so we don't actually handle the SIGIO as
an interrupt.
Since we're in pause(), the mere act of receiving SIGIO wakes
us up, and then after things have been restored enough, re-set
O_ASYNC for all previously suspended FDs, reinstall the proper
SIGIO handler, and send SIGIO to self to process anything that
might now be pending.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
