summaryrefslogtreecommitdiff
path: root/arch/x86/Kbuild
AgeCommit message (Collapse)Author
2019-05-30treewide: Add SPDX license identifier - KbuildGreg Kroah-Hartman
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0 Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13KVM: x86: Allow Qemu/KVM to use PVH entry pointMaran Wilson
For certain applications it is desirable to rapidly boot a KVM virtual machine. In cases where legacy hardware and software support within the guest is not needed, Qemu should be able to boot directly into the uncompressed Linux kernel binary without the need to run firmware. There already exists an ABI to allow this for Xen PVH guests and the ABI is supported by Linux and FreeBSD: https://xenbits.xen.org/docs/unstable/misc/pvh.html This patch enables Qemu to use that same entry point for booting KVM guests. Signed-off-by: Maran Wilson <maran.wilson@oracle.com> Suggested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-12-13xen/pvh: Move PVH entry code out of Xen specific treeMaran Wilson
Once hypervisors other than Xen start using the PVH entry point for starting VMs, we would like the option of being able to compile PVH entry capable kernels without enabling CONFIG_XEN and all the code that comes along with that. To allow that, we are moving the PVH code out of Xen and into files sitting at a higher level in the tree. This patch is not introducing any code or functional changes, just moving files from one location to another. Signed-off-by: Maran Wilson <maran.wilson@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-09-07Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes include various Hyper-V optimizations such as faster hypercalls and faster/better TLB flushes - and there's also some Intel-MID cleanups" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/hyper-v: Trace hyperv_mmu_flush_tlb_others() x86/hyper-v: Support extended CPU ranges for TLB flush hypercalls x86/platform/intel-mid: Make several arrays static, to make code smaller MAINTAINERS: Add missed file for Hyper-V x86/hyper-v: Use hypercall for remote TLB flush hyper-v: Globalize vp_index x86/hyper-v: Implement rep hypercalls hyper-v: Use fast hypercall for HVCALL_SIGNAL_EVENT x86/hyper-v: Introduce fast hypercall implementation x86/hyper-v: Make hv_do_hypercall() inline x86/hyper-v: Include hyperv/ only when CONFIG_HYPERV is set x86/platform/intel-mid: Make 'bt_sfi_data' const x86/platform/intel-mid: Make IRQ allocation a bit more flexible x86/platform/intel-mid: Group timers callbacks together
2017-08-24x86/lguest: Remove lguest supportJuergen Gross
Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10x86/hyper-v: Include hyperv/ only when CONFIG_HYPERV is setVitaly Kuznetsov
Code is arch/x86/hyperv/ is only needed when CONFIG_HYPERV is set, the 'basic' support and detection lives in arch/x86/kernel/cpu/mshyperv.c which is included when CONFIG_HYPERVISOR_GUEST is set. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20170802160921.21791-2-vkuznets@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-19Drivers: hv vmbus: Move Hypercall page setup out of common codeK. Y. Srinivasan
As part of the effort to separate out architecture specific code, move the hypercall page setup to an architecture specific file. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-09perf/x86: Move perf_event.c ............... => x86/events/core.cBorislav Petkov
Also, keep the churn at minimum by adjusting the include "perf_event.h" when each file gets moved. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1454947748-28629-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-03x86/asm/entry, x86/vdso: Move the vDSO code to arch/x86/entry/vdso/Ingo Molnar
Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-03x86/asm/entry: Move entry_64.S and entry_32.S to arch/x86/entry/Ingo Molnar
Create a new directory hierarchy for the low level x86 entry code: arch/x86/entry/* This will host all the low level glue that is currently scattered all across arch/x86/. Start with entry_64.S and entry_32.S. Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-29kexec: create a new config option CONFIG_KEXEC_FILE for new syscallVivek Goyal
Currently new system call kexec_file_load() and all the associated code compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory code which currently uses gcc option -mcmodel=large. This option seems to be available only gcc 4.4 onwards. Hiding new functionality behind a new config option will not break existing users of old gcc. Those who wish to enable new functionality will require new gcc. Having said that, I am trying to figure out how can I move away from using -mcmodel=large but that can take a while. I think there are other advantages of introducing this new config option. As this option will be enabled only on x86_64, other arches don't have to compile generic kexec code which will never be used. This new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had to do this for CONFIG_KEXEC. Now with introduction of new config option, we can remove crypto dependency from other arches. Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had CONFIG_X86_64 defined, I got rid of that. For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to "depends on CRYPTO=y". This should be safer as "select" is not recursive. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Tested-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08purgatory: core purgatory functionalityVivek Goyal
Create a stand alone relocatable object purgatory which runs between two kernels. This name, concept and some code has been taken from kexec-tools. Idea is that this code runs after a crash and it runs in minimal environment. So keep it separate from rest of the kernel and in long term we will have to practically do no maintenance of this code. This code also has the logic to do verify sha256 hashes of various segments which have been loaded into memory. So first we verify that the kernel we are jumping to is fine and has not been corrupted and make progress only if checsums are verified. This code also takes care of copying some memory contents to backup region. [sfr@canb.auug.org.au: run host built programs from objtree] Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-08x86, realmode: realmode.bin infrastructureJarkko Sakkinen
Create realmode.bin and realmode.relocs files. Piggy pack them into relocatable object that will be included into .init.data section of the main kernel image. The first file includes binary image of the real-mode code. The latter file includes all relocations. The layout of the binary image is specified in realmode.lds.S. The makefile generates pa_ prefixed symbols for each exported global. These are used in 32-bit code and in realmode header to define symbols that need to be relocated. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-3-git-send-email-jarkko.sakkinen@intel.com Originally-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-04-27net: filter: Just In Time compiler for x86-64Eric Dumazet
In order to speedup packet filtering, here is an implementation of a JIT compiler for x86_64 It is disabled by default, and must be enabled by the admin. echo 1 >/proc/sys/net/core/bpf_jit_enable It uses module_alloc() and module_free() to get memory in the 2GB text kernel range since we call helpers functions from the generated code. EAX : BPF A accumulator EBX : BPF X accumulator RDI : pointer to skb (first argument given to JIT function) RBP : frame pointer (even if CONFIG_FRAME_POINTER=n) r9d : skb->len - skb->data_len (headlen) r8 : skb->data To get a trace of generated code, use : echo 2 >/proc/sys/net/core/bpf_jit_enable Example of generated code : # tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24 flen=18 proglen=147 pass=3 image=ffffffffa00b5000 JIT code: ffffffffa00b5000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 60 JIT code: ffffffffa00b5010: 44 2b 4f 64 4c 8b 87 b8 00 00 00 be 0c 00 00 00 JIT code: ffffffffa00b5020: e8 24 7b f7 e0 3d 00 08 00 00 75 28 be 1a 00 00 JIT code: ffffffffa00b5030: 00 e8 fe 7a f7 e0 24 00 3d 00 14 a8 c0 74 49 be JIT code: ffffffffa00b5040: 1e 00 00 00 e8 eb 7a f7 e0 24 00 3d 00 14 a8 c0 JIT code: ffffffffa00b5050: 74 36 eb 3b 3d 06 08 00 00 74 07 3d 35 80 00 00 JIT code: ffffffffa00b5060: 75 2d be 1c 00 00 00 e8 c8 7a f7 e0 24 00 3d 00 JIT code: ffffffffa00b5070: 14 a8 c0 74 13 be 26 00 00 00 e8 b5 7a f7 e0 24 JIT code: ffffffffa00b5080: 00 3d 00 14 a8 c0 75 07 b8 ff ff 00 00 eb 02 31 JIT code: ffffffffa00b5090: c0 c9 c3 BPF program is 144 bytes long, so native program is almost same size ;) (000) ldh [12] (001) jeq #0x800 jt 2 jf 8 (002) ld [26] (003) and #0xffffff00 (004) jeq #0xc0a81400 jt 16 jf 5 (005) ld [30] (006) and #0xffffff00 (007) jeq #0xc0a81400 jt 16 jf 17 (008) jeq #0x806 jt 10 jf 9 (009) jeq #0x8035 jt 10 jf 17 (010) ld [28] (011) and #0xffffff00 (012) jeq #0xc0a81400 jt 16 jf 13 (013) ld [38] (014) and #0xffffff00 (015) jeq #0xc0a81400 jt 16 jf 17 (016) ret #65535 (017) ret #0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27x86: Add platform directoryThomas Gleixner
x86 has finally arrived in the embedded nightmare and will rapidly grow SoC platform support in various flavours. So we need a place for the platform support files. That also allows us to clean up the dumpground which arch/x86/kernel has become over time. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-16x86: standardize Kbuild rulesSam Ravnborg
Introducing this Kbuild file allow us to: make arch/x86/ And thus building all the core part of x86. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Jaswinder Singh Rajput <jaswinder@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>