summaryrefslogtreecommitdiff
path: root/arch/x86/Kconfig.debug
AgeCommit message (Collapse)Author
2018-10-17x86/kconfig: Remove redundant 'default n' lines from all x86 Kconfig'sBartlomiej Zolnierkiewicz
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also, since commit: f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") ... the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Juergen Gross <jgross@suse.co> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181016134217eucas1p2102984488b89178a865162553369025b%7EeGpI5NlJo0851008510eucas1p2D@eucas1p2.samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-08-02Kconfig: consolidate the "Kernel hacking" menuChristoph Hellwig
Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to the top-level Kconfig. For two architectures that means moving their arch-specific symbols in that menu into a new arch Kconfig.debug file, and for a few more creating a dummy file so that we can include it unconditionally. Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where it belongs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-22x86, nfit_test: Add unit test for memcpy_mcsafe()Dan Williams
Given the fact that the ACPI "EINJ" (error injection) facility is not universally available, implement software infrastructure to validate the memcpy_mcsafe() exception handling implementation. For each potential read exception point in memcpy_mcsafe(), inject a emulated exception point at the address identified by 'mcsafe_inject' variable. With this infrastructure implement a test to validate that the 'bytes remaining' calculation is correct for a range of various source buffer alignments. This code is compiled out by default. The CONFIG_MCSAFE_DEBUG configuration symbol needs to be manually enabled by editing Kconfig.debug. I.e. this functionality can not be accidentally enabled by a user / distro, it's only for development. Cc: <x86@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-01-30Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Misc cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove unused IOMMU_STRESS Kconfig x86/extable: Mark exception handler functions visible x86/timer: Don't inline __const_udelay x86/headers: Remove duplicate #includes
2018-01-25x86: Remove unused IOMMU_STRESS KconfigCorentin Labbe
Last use of IOMMU_STRESS was removed in commit 29b68415e335 ("x86: amd_iommu: move to drivers/iommu/"). 6 years later the Kconfig entry is definitely due for removal. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/1516825754-28415-1-git-send-email-clabbe@baylibre.com
2017-12-11x86/unwinder/guess: Prevent using CONFIG_UNWINDER_GUESS=y with ↵Andrey Ryabinin
CONFIG_STACKDEPOT=y Stackdepot doesn't work well with CONFIG_UNWINDER_GUESS=y. The 'guess' unwinder generate awfully large and inaccurate stacktraces, thus stackdepot can't deduplicate stacktraces because they all look like unique. Eventually stackdepot reaches its capacity limit: WARNING: CPU: 0 PID: 545 at lib/stackdepot.c:119 depot_save_stack+0x28e/0x550 Call Trace: ? kasan_kmalloc+0x144/0x160 ? depot_save_stack+0x1f5/0x550 ? do_raw_spin_unlock+0xda/0xf0 ? preempt_count_sub+0x13/0xc0 <...90 lines...> ? do_raw_spin_unlock+0xda/0xf0 Add a STACKDEPOT=n dependency to UNWINDER_GUESS to avoid the problem. Reported-by: kernel test robot <xiaolong.ye@intel.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171130123554.4330-1-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflictsIngo Molnar
Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-14x86/unwind: Make CONFIG_UNWINDER_ORC=y the default in kconfig for 64-bitJosh Poimboeuf
The ORC unwinder has been stable in testing so far. Give it much wider testing by making it the default in kconfig for x86_64. It's not yet supported for 32-bit, so leave frame pointers as the default there. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9b1237bbe7244ed9cdf8db2dcb1253e37e1c341e.1507924831.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-14x86/unwind: Rename unwinder config options to 'CONFIG_UNWINDER_*'Josh Poimboeuf
Rename the unwinder config options from: CONFIG_ORC_UNWINDER CONFIG_FRAME_POINTER_UNWINDER CONFIG_GUESS_UNWINDER to: CONFIG_UNWINDER_ORC CONFIG_UNWINDER_FRAME_POINTER CONFIG_UNWINDER_GUESS ... in order to give them a more logical config namespace. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/73972fc7e2762e91912c6b9584582703d6f1b8cc.1507924831.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10Merge branch 'x86/urgent' into x86/asm, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-26x86/kconfig: Consolidate unwinders into multiple choice selectionJosh Poimboeuf
There are three mutually exclusive unwinders. Make that more obvious by combining them into a multiple-choice selection: CONFIG_FRAME_POINTER_UNWINDER CONFIG_ORC_UNWINDER CONFIG_GUESS_UNWINDER (if CONFIG_EXPERT=y) Frame pointers are still the default (for now). The old CONFIG_FRAME_POINTER option is still used in some arch-independent places, so keep it around, but make it invisible to the user on x86 - it's now selected by CONFIG_FRAME_POINTER_UNWINDER=y. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20170725135424.zukjmgpz3plf5pmt@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-26x86/kconfig: Make it easier to switch to the new ORC unwinderJosh Poimboeuf
A couple of Kconfig changes which make it much easier to switch to the new CONFIG_ORC_UNWINDER: 1) Remove x86 dependencies on CONFIG_FRAME_POINTER for lockdep, latencytop, and fault injection. x86 has a 'guess' unwinder which just scans the stack for kernel text addresses. It's not 100% accurate but in many cases it's good enough. This allows those users who don't want the text overhead of the frame pointer or ORC unwinders to still use these features. More importantly, this also makes it much more straightforward to disable frame pointers. 2) Make CONFIG_ORC_UNWINDER depend on !CONFIG_FRAME_POINTER. While it would be possible to have both enabled, it doesn't really make sense to do so. So enforce a sane configuration to prevent the user from making a dumb mistake. With these changes, when you disable CONFIG_FRAME_POINTER, "make oldconfig" will ask if you want to enable CONFIG_ORC_UNWINDER. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/9985fb91ce5005fe33ea5cc2a20f14bd33c61d03.1500938583.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-26x86/unwind: Add the ORC unwinderJosh Poimboeuf
Add the new ORC unwinder which is enabled by CONFIG_ORC_UNWINDER=y. It plugs into the existing x86 unwinder framework. It relies on objtool to generate the needed .orc_unwind and .orc_unwind_ip sections. For more details on why ORC is used instead of DWARF, see Documentation/x86/orc-unwinder.txt - but the short version is that it's a simplified, fundamentally more robust debugninfo data structure, which also allows up to two orders of magnitude faster lookups than the DWARF unwinder - which matters to profiling workloads like perf. Thanks to Andy Lutomirski for the performance improvement ideas: splitting the ORC unwind table into two parallel arrays and creating a fast lookup table to search a subset of the unwind table. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/0a6cbfb40f8da99b7a45a1a8302dc6aef16ec812.1500938583.git.jpoimboe@redhat.com [ Extended the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-20x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUGArnd Bergmann
The IOSF_MBI option requires PCI support, without it we get a harmless Kconfig warning when it gets selected by PUNIT_ATOM_DEBUG: warning: (X86_INTEL_LPSS && SND_SST_IPC_ACPI && MMC_SDHCI_ACPI && PUNIT_ATOM_DEBUG) selects IOSF_MBI which has unmet direct dependencies (PCI) This adds another dependency to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170719125310.2487451-8-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18x86/entry/64: Refactor IRQ stacks and make them NMI-safeAndy Lutomirski
This will allow IRQ stacks to nest inside NMIs or similar entries that can happen during IRQ stack setup or teardown. The new macros won't work correctly if they're invoked with IRQs on. Add a check under CONFIG_DEBUG_ENTRY to detect that. Signed-off-by: Andy Lutomirski <luto@kernel.org> [ Use %r10 instead of %r11 in xen_do_hypervisor_callback to make objtool and ORC unwinder's lives a little easier. ] Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/b0b2ff5fb97d2da2e1d7e1f380190c92545c8bb5.1499786555.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21usb/early: Add driver for xhci debug capabilityLu Baolu
XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27mm: add arch-independent testcases for RODATAJinbum Park
This patch makes arch-independent testcases for RODATA. Both x86 and x86_64 already have testcases for RODATA, But they are arch-specific because using inline assembly directly. And cacheflush.h is not a suitable location for rodata-test related things. Since they were in cacheflush.h, If someone change the state of CONFIG_DEBUG_RODATA_TEST, It cause overhead of kernel build. To solve the above issues, write arch-independent testcases and move it to shared location. [jinb.park7@gmail.com: fix config dependency] Link: http://lkml.kernel.org/r/20170209131625.GA16954@pjb1027-Latitude-E5410 Link: http://lkml.kernel.org/r/20170129105436.GA9303@pjb1027-Latitude-E5410 Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-21Merge tag 'rodata-v4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull rodata updates from Kees Cook: "This renames the (now inaccurate) DEBUG_RODATA and related SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and STRICT_MODULE_RWX" * tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
2017-02-07arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be commonLaura Abbott
There are multiple architectures that support CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX. These options also now have the ability to be turned off at runtime. Move these to an architecture independent location and make these options def_bool y for almost all of those arches. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-01-31x86/mm: Remove CONFIG_DEBUG_NX_TESTKees Cook
CONFIG_DEBUG_NX_TEST has been broken since CONFIG_DEBUG_SET_MODULE_RONX=y was added in v2.6.37 via: 84e1c6bb38eb ("x86: Add RO/NX protection for loadable kernel modules") since the exception table was then made read-only. Additionally, the manually constructed extables were never fixed when relative extables were introduced in v3.5 via: 706276543b69 ("x86, extable: Switch to relative exception table entries") However, relative extables won't work for test_nx.c, since test instruction memory areas may be more than INT_MAX away from an executable fixup (e.g. stack and heap too far away from executable memory with the fixup). Since clearly no one has been using this code for a while now, and similar tests exist in LKDTM, this should just be removed entirely. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170131003711.GA74048@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-15Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "This is another big update. Main changes are: - lots of x86 system call (and other traps/exceptions) entry code enhancements. In particular the complex parts of the 64-bit entry code have been migrated to C code as well, and a number of dusty corners have been refreshed. (Andy Lutomirski) - vDSO special mapping robustification and general cleanups (Andy Lutomirski) - cpufeature refactoring, cleanups and speedups (Borislav Petkov) - lots of other changes ..." * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits) x86/cpufeature: Enable new AVX-512 features x86/entry/traps: Show unhandled signal for i386 in do_trap() x86/entry: Call enter_from_user_mode() with IRQs off x86/entry/32: Change INT80 to be an interrupt gate x86/entry: Improve system call entry comments x86/entry: Remove TIF_SINGLESTEP entry work x86/entry/32: Add and check a stack canary for the SYSENTER stack x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup x86/entry: Only allocate space for tss_struct::SYSENTER_stack if needed x86/entry: Vastly simplify SYSENTER TF (single-step) handling x86/entry/traps: Clear DR6 early in do_debug() and improve the comment x86/entry/traps: Clear TIF_BLOCKSTEP on all debug exceptions x86/entry/32: Restore FLAGS on SYSEXIT x86/entry/32: Filter NT and speed up AC filtering in SYSENTER x86/entry/compat: In SYSENTER, sink AC clearing below the existing FLAGS test selftests/x86: In syscall_nt, test NT|TF as well x86/asm-offsets: Remove PARAVIRT_enabled x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled uprobes: __create_xol_area() must nullify xol_mapping.fault x86/cpufeature: Create a new synthetic cpu capability for machine check recovery ...
2016-02-22x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig optionKees Cook
This removes the CONFIG_DEBUG_RODATA option and makes it always enabled. This simplifies the code and also makes it clearer that read-only mapped memory is just as fundamental a security feature in kernel-space as it is in user-space. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Brown <david.brown@linaro.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: PaX Team <pageexec@freemail.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-hardening@lists.openwall.com Cc: linux-arch <linux-arch@vger.kernel.org> Link: http://lkml.kernel.org/r/1455748879-21872-4-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-30x86/cpufeature: Replace the old static_cpu_has() with safe variantBorislav Petkov
So the old one didn't work properly before alternatives had run. And it was supposed to provide an optimized JMP because the assumption was that the offset it is jumping to is within a signed byte and thus a two-byte JMP. So I did an x86_64 allyesconfig build and dumped all possible sites where static_cpu_has() was used. The optimization amounted to all in all 12(!) places where static_cpu_has() had generated a 2-byte JMP. Which has saved us a whopping 36 bytes! This clearly is not worth the trouble so we can remove it. The only place where the optimization might count - in __switch_to() - we will handle differently. But that's not subject of this patch. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1453842730-28463-6-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-13Merge tag 'libnvdimm-for-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this has appeared in -next and independently received a build success notification from the kbuild robot. The 'for-4.5/block- dax' topic branch was rebased over the weekend to drop the "block device end-of-life" rework that Al would like to see re-implemented with a notifier, and to address bug reports against the badblocks integration. There is pending feedback against "libnvdimm: Add a poison list and export badblocks" received last week. Linda identified some localized fixups that we will handle incrementally. Summary: - Media error handling: The 'badblocks' implementation that originated in md-raid is up-levelled to a generic capability of a block device. This initial implementation is limited to being consulted in the pmem block-i/o path. Later, 'badblocks' will be consulted when creating dax mappings. - Raw block device dax: For virtualization and other cases that want large contiguous mappings of persistent memory, add the capability to dax-mmap a block device directly. - Increased /dev/mem restrictions: Add an option to treat all io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is actively using an address range. This behavior is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the existing "iomem=relaxed" kernel command line option. - Miscellaneous fixes include a 'pfn'-device huge page alignment fix, block device shutdown crash fix, and other small libnvdimm fixes" * tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits) block: kill disk_{check|set|clear|alloc}_badblocks libnvdimm, pmem: nvdimm_read_bytes() badblocks support pmem, dax: disable dax in the presence of bad blocks pmem: fail io-requests to known bad blocks libnvdimm: convert to statically allocated badblocks libnvdimm: don't fail init for full badblocks list block, badblocks: introduce devm_init_badblocks block: clarify badblocks lifetime badblocks: rename badblocks_free to badblocks_exit libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h libnvdimm: Add a poison list and export badblocks nfit_test: Enable DSMs for all test NFITs md: convert to use the generic badblocks code block: Add badblock management for gendisks badblocks: Add core badblock management code block: fix del_gendisk() vs blkdev_ioctl crash block: enable dax for raw block devices block: introduce bdev_file_inode() restrict /dev/mem to idle io memory ranges arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug ...
2016-01-09arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debugDan Williams
Let all the archs that implement devmem_is_allowed() opt-in to a common definition of CONFIG_STRICT_DEVM in lib/Kconfig.debug. Cc: Kees Cook <keescook@chromium.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [heiko: drop 'default y' for s390] Acked-by: Ingo Molnar <mingo@redhat.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-23x86/mm: Turn CONFIG_X86_PTDUMP into a moduleKees Cook
Being able to examine page tables is handy, so make this a module that can be loaded as needed. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20151120010755.GA9060@www.outflux.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-06x86: don't make DEBUG_WX default to 'y' even with DEBUG_RODATALinus Torvalds
It turns out that we still have issues with the EFI memory map that ends up polluting our kernel page tables with writable executable pages. That will get sorted out, but in the meantime let's not make the scary complaint about them be on by default. The code is useful for developers, but not ready for end user testing yet. Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-06x86/mm: Warn on W^X mappingsStephen Smalley
Warn on any residual W+X mappings after setting NX if DEBUG_WX is enabled. Introduce a separate X86_PTDUMP_CORE config that enables the code for dumping the page tables without enabling the debugfs interface, so that DEBUG_WX can be enabled without exposing the debugfs interface. Switch EFI_PGT_DUMP to using X86_PTDUMP_CORE so that it also does not require enabling the debugfs interface. On success it prints this to the kernel log: x86/mm: Checked W+X mappings: passed, no W+X pages found. On failure it prints a warning and a count of the failed pages: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:226 note_page+0x610/0x7b0() x86/mm: Found insecure W+X mapping at address ffffffff81755000/__stop___ex_table+0xfa8/0xabfa8 [...] Call Trace: [<ffffffff81380a5f>] dump_stack+0x44/0x55 [<ffffffff8109d3f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff8109d48c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff8106cfc9>] ? note_page+0x5c9/0x7b0 [<ffffffff8106d010>] note_page+0x610/0x7b0 [<ffffffff8106d409>] ptdump_walk_pgd_level_core+0x259/0x3c0 [<ffffffff8106d5a7>] ptdump_walk_pgd_level_checkwx+0x17/0x20 [<ffffffff81063905>] mark_rodata_ro+0xf5/0x100 [<ffffffff817415a0>] ? rest_init+0x80/0x80 [<ffffffff817415bd>] kernel_init+0x1d/0xe0 [<ffffffff8174cd1f>] ret_from_fork+0x3f/0x70 [<ffffffff817415a0>] ? rest_init+0x80/0x80 ---[ end trace a1f23a1e42a2ac76 ]--- x86/mm: Checked W+X mappings: FAILED, 171 W+X pages found. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1444064120-11450-1-git-send-email-sds@tycho.nsa.gov [ Improved the Kconfig help text and made the new option default-y if CONFIG_DEBUG_RODATA=y, because it already found buggy mappings, so we really want people to have this on by default. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-17x86/entry/64, x86/nmi/64: Add CONFIG_DEBUG_ENTRY NMI testing codeAndy Lutomirski
It turns out to be rather tedious to test the NMI nesting code. Make it easier: add a new CONFIG_DEBUG_ENTRY option that causes the NMI handler to pre-emptively unmask NMIs. With this option set, errors in the repeat_nmi logic or failures to detect that we're in a nested NMI will result in quick panics under perf (especially if multiple counters are running at high frequency) instead of requiring an unusual workload that generates page faults or breakpoints inside NMIs. I called it CONFIG_DEBUG_ENTRY instead of CONFIG_DEBUG_NMI_ENTRY because I want to add new non-NMI checks elsewhere in the entry code in the future, and I'd rather not add too many new config options or add this option and then immediately rename it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-22Merge branch 'x86-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Ingo Molnar: "There were so many changes in the x86/asm, x86/apic and x86/mm topics in this cycle that the topical separation of -tip broke down somewhat - so the result is a more traditional architecture pull request, collected into the 'x86/core' topic. The topics were still maintained separately as far as possible, so bisectability and conceptual separation should still be pretty good - but there were a handful of merge points to avoid excessive dependencies (and conflicts) that would have been poorly tested in the end. The next cycle will hopefully be much more quiet (or at least will have fewer dependencies). The main changes in this cycle were: * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas Gleixner) - This is the second and most intrusive part of changes to the x86 interrupt handling - full conversion to hierarchical interrupt domains: [IOAPIC domain] ----- | [MSI domain] --------[Remapping domain] ----- [ Vector domain ] | (optional) | [HPET MSI domain] ----- | | [DMAR domain] ----------------------------- | [Legacy domain] ----------------------------- This now reflects the actual hardware and allowed us to distangle the domain specific code from the underlying parent domain, which can be optional in the case of interrupt remapping. It's a clear separation of functionality and removes quite some duct tape constructs which plugged the remap code between ioapic/msi/hpet and the vector management. - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt injection into guests (Feng Wu) * x86/asm changes: - Tons of cleanups and small speedups, micro-optimizations. This is in preparation to move a good chunk of the low level entry code from assembly to C code (Denys Vlasenko, Andy Lutomirski, Brian Gerst) - Moved all system entry related code to a new home under arch/x86/entry/ (Ingo Molnar) - Removal of the fragile and ugly CFI dwarf debuginfo annotations. Conversion to C will reintroduce many of them - but meanwhile they are only getting in the way, and the upstream kernel does not rely on them (Ingo Molnar) - NOP handling refinements. (Borislav Petkov) * x86/mm changes: - Big PAT and MTRR rework: making the code more robust and preparing to phase out exposing direct MTRR interfaces to drivers - in favor of using PAT driven interfaces (Toshi Kani, Luis R Rodriguez, Borislav Petkov) - New ioremap_wt()/set_memory_wt() interfaces to support Write-Through cached memory mappings. This is especially important for good performance on NVDIMM hardware (Toshi Kani) * x86/ras changes: - Add support for deferred errors on AMD (Aravind Gopalakrishnan) This is an important RAS feature which adds hardware support for poisoned data. That means roughly that the hardware marks data which it has detected as corrupted but wasn't able to correct, as poisoned data and raises an APIC interrupt to signal that in the form of a deferred error. It is the OS's responsibility then to take proper recovery action and thus prolonge system lifetime as far as possible. - Add support for Intel "Local MCE"s: upcoming CPUs will support CPU-local MCE interrupts, as opposed to the traditional system- wide broadcasted MCE interrupts (Ashok Raj) - Misc cleanups (Borislav Petkov) * x86/platform changes: - Intel Atom SoC updates ... and lots of other cleanups, fixlets and other changes - see the shortlog and the Git log for details" * 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits) x86/hpet: Use proper hpet device number for MSI allocation x86/hpet: Check for irq==0 when allocating hpet MSI interrupts x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail genirq: Prevent crash in irq_move_irq() genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain iommu, x86: Properly handle posted interrupts for IOMMU hotplug iommu, x86: Provide irq_remapping_cap() interface iommu, x86: Setup Posted-Interrupts capability for Intel iommu iommu, x86: Add cap_pi_support() to detect VT-d PI capability iommu, x86: Avoid migrating VT-d posted interrupts iommu, x86: Save the mode (posted or remapped) of an IRTE iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip iommu: dmar: Provide helper to copy shared irte fields iommu: dmar: Extend struct irte for VT-d Posted-Interrupts iommu: Add new member capability to struct irq_remap_ops x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry() ...
2015-05-19x86/fpu: Add CONFIG_X86_DEBUG_FPU=y FPU debugging codeIngo Molnar
There are various internal FPU state debugging checks that never trigger in practice, but which are useful for FPU code development. Separate these out into CONFIG_X86_DEBUG_FPU=y, and also add a couple of new ones. The size difference is about 0.5K of code on defconfig: text data bss filename 15028906 2578816 1638400 vmlinux 15029430 2578816 1638400 vmlinux ( Keep this enabled by default until the new FPU code is debugged. ) Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-07x86/platform/atom/punit: Add Punit device state debug driverSrinivas Pandruvada
The patch adds a debug driver, which dumps the power states of all the North complex (NC) devices. This debug interface is useful to figure out the devices, which blocks the S0ix transitions on the platform. This is extremely useful during enabling PM on customer platforms and derivatives. This submission is based on the submission from Mahesh Kumar P: https://lkml.org/lkml/2014/11/5/367 Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Mahesh Kumar P <mahesh.kumar.p@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1430939754-6900-2-git-send-email-srinivas.pandruvada@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-07x86, intel-mid: remove Intel MID specific serial supportAndy Shevchenko
Since we have a native 8250 driver carrying the Intel MID serial devices the specific support is not needed anymore. This patch removes it for Intel MID. Note that the console device name is changed from ttyMFDx to ttySx. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-18x86/intel/quark: Add Isolated Memory Regions for Quark X1000Bryan O'Donoghue
Intel's Quark X1000 SoC contains a set of registers called Isolated Memory Regions. IMRs are accessed over the IOSF mailbox interface. IMRs are areas carved out of memory that define read/write access rights to the various system agents within the Quark system. For a given agent in the system it is possible to specify if that agent may read or write an area of memory defined by an IMR with a granularity of 1 KiB. Quark_SecureBootPRM_330234_001.pdf section 4.5 details the concept of IMRs quark-x1000-datasheet.pdf section 12.7.4 details the implementation of IMRs in silicon. eSRAM flush, CPU Snoop write-only, CPU SMM Mode, CPU non-SMM mode, RMU and PCIe Virtual Channels (VC0 and VC1) can have individual read/write access masks applied to them for a given memory region in Quark X1000. This enables IMRs to treat each memory transaction type listed above on an individual basis and to filter appropriately based on the IMR access mask for the memory region. Quark supports eight IMRs. Since all of the DMA capable SoC components in the X1000 are mapped to VC0 it is possible to define sections of memory as invalid for DMA write operations originating from Ethernet, USB, SD and any other DMA capable south-cluster component on VC0. Similarly it is possible to mark kernel memory as non-SMM mode read/write only or to mark BIOS runtime memory as SMM mode accessible only depending on the particular memory footprint on a given system. On an IMR violation Quark SoC X1000 systems are configured to reset the system, so ensuring that the IMR memory map is consistent with the EFI provided memory map is critical to ensure no IMR violations reset the system. The API for accessing IMRs is based on MTRR code but doesn't provide a /proc or /sys interface to manipulate IMRs. Defining the size and extent of IMRs is exclusively the domain of in-kernel code. Quark firmware sets up a series of locked IMRs around pieces of memory that firmware owns such as ACPI runtime data. During boot a series of unlocked IMRs are placed around items in memory to guarantee no DMA modification of those items can take place. Grub also places an unlocked IMR around the kernel boot params data structure and compressed kernel image. It is necessary for the kernel to tear down all unlocked IMRs in order to ensure that the kernel's view of memory passed via the EFI memory map is consistent with the IMR memory map. Without tearing down all unlocked IMRs on boot transitory IMRs such as those used to protect the compressed kernel image will cause IMR violations and system reboots. The IMR init code tears down all unlocked IMRs and sets a protective IMR around the kernel .text and .rodata as one contiguous block. This sanitizes the IMR memory map with respect to the EFI memory map and protects the read-only portions of the kernel from unwarranted DMA access. Tested-by: Ong, Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Andy Shevchenko <andy.schevchenko@gmail.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Ong, Boon Leong <boon.leong.ong@intel.com> Cc: andy.shevchenko@gmail.com Cc: dvhart@infradead.org Link: http://lkml.kernel.org/r/1422635379-12476-2-git-send-email-pure.logic@nexus-software.ie Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-04x86/efi: Dump the EFI page tableBorislav Petkov
This is very useful for debugging issues with the recently added pagetable switching code for EFI virtual mode. Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-02-05x86: Disable CONFIG_X86_DECODER_SELFTEST in allmod/allyesconfigsIngo Molnar
It can take some time to validate the image, make sure {allyes|allmod}config doesn't enable it. I'd say randconfig will cover it often enough, and the failure is also borderline build coverage related: you cannot really make the decoder test fail via source level changes, only with changes in the build environment, so I agree with Andi that we can disable this one too. Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Paul Gortmaker paul.gortmaker@windriver.com> Suggested-and-acked-by: Andi Kleen andi@firstfloor.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-28x86/efi: Add EFI framebuffer earlyprintk supportMatt Fleming
It's incredibly difficult to diagnose early EFI boot issues without special hardware because earlyprintk=vga doesn't work on EFI systems. Add support for writing to the EFI framebuffer, via earlyprintk=efi, which will actually give users a chance of providing debug output. Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Jones <pjones@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-07-04Merge branch 'kconfig-diet' from Dave HansenLinus Torvalds
Merge Kconfig menu diet patches from Dave Hansen: "I think the "Kernel Hacking" menu has gotten a bit out of hand. It is over 120 lines long on my system with everything enabled and options are scattered around it haphazardly. http://sr71.net/~dave/linux/kconfig-horror.png Let's try to introduce some sanity. This set takes that 120 lines down to 55 and makes it vastly easier to find some things. It's a start. This set stands on its own, but there is plenty of room for follow-up patches. The arch-specific debug options still end up getting stuck in the top-level "kernel hacking" menu. OPTIMIZE_INLINING, for instance, could obviously go in to the "compiler options" menu, but the fact that it is defined in arch/ in a separate Kconfig file keeps it on its own for the moment. The Signed-off-by's in here look funky. I changed employers while working on this set, so I have signoffs from both email addresses" * emailed patches from Dave Hansen <dave@sr71.net>: hang and lockup detection menu kconfig: consolidate printk options group locking debugging options consolidate compilation option configs consolidate runtime testing configs order memory debugging Kconfig options consolidate per-arch stack overflow debugging options
2013-07-04consolidate per-arch stack overflow debugging optionsDave Hansen
Original posting: http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com Several architectures have similar stack debugging config options. They all pretty much do the same thing, some with slightly differing help text. This patch changes the architectures to instead enable a Kconfig boolean, and then use that boolean in the generic Kconfig.debug to present the actual menu option. This removes a bunch of duplication and adds consistency across arches. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile] Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-02Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 FPU changes from Ingo Molnar: "There are two bigger changes in this tree: - Add an [early-use-]safe static_cpu_has() variant and other robustness improvements, including the new X86_DEBUG_STATIC_CPU_HAS configurable debugging facility, motivated by recent obscure FPU code bugs, by Borislav Petkov - Reimplement FPU detection code in C and drop the old asm code, by Peter Anvin." * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, fpu: Use static_cpu_has_safe before alternatives x86: Add a static_cpu_has_safe variant x86: Sanity-check static_cpu_has usage x86, cpu: Add a synthetic, always true, cpu feature x86: Get rid of ->hard_math and all the FPU asm fu
2013-06-20x86: Sanity-check static_cpu_has usageBorislav Petkov
static_cpu_has may be used only after alternatives have run. Before that it always returns false if constant folding with __builtin_constant_p() doesn't happen. And you don't want that. This patch is the result of me debugging an issue where I overzealously put static_cpu_has in code which executed before alternatives have run and had to spend some time with scratching head and cursing at the monitor. So add a jump to a warning which screams loudly when we use this function too early. The alternatives patch that check away in conjunction with patching the rest of the kernel image. [ hpa: factored this into its own configuration option. If we want to have an overarching option, it should be an option which selects other options, not as a group option in the source code. ] Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1370772454-6106-4-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-13x86: Extend #DF debugging aid to 64-bitBorislav Petkov
It is sometimes very helpful to be able to pinpoint the location which causes a double fault before it turns into a triple fault and the machine reboots. We have this for 32-bit already so extend it to 64-bit. On 64-bit we get the register snapshot at #DF time and not from the first exception which actually causes the #DF. It should be close enough, though. [ hpa: and definitely better than nothing, which is what we have now. ] Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1368093749-31296-1-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-30Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKSStephen Boyd
The help text for this config is duplicated across the x86, parisc, and s390 Kconfig.debug files. Arnd Bergman noted that the help text was slightly misleading and should be fixed to state that enabling this option isn't a problem when using pre 4.4 gcc. To simplify the rewording, consolidate the text into lib/Kconfig.debug and modify it there to be more explicit about when you should say N to this config. Also, make the text a bit more generic by stating that this option enables compile time checks so we can cover architectures which emit warnings vs. ones which emit errors. The details of how an architecture decided to implement the checks isn't as important as the concept of compile time checking of copy_from_user() calls. While we're doing this, remove all the copy_from_user_overflow() code that's duplicated many times and place it into lib/ so that any architecture supporting this option can get the function for free. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Helge Deller <deller@gmx.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-10x86/mm: Re-enable DEBUG_TLBFLUSH for X86_32Paul Bolle
CONFIG_INVLPG got removed in commit 094ab1db7cb7833cd4c820acd868fc26acf3f08e ("x86, 386 removal: Remove CONFIG_INVLPG"). That commit left one instance of CONFIG_INVLPG untouched, effectively disabling DEBUG_TLBFLUSH for X86_32. Since all currently supported x86 CPUs should now be able to support that option, just drop the entire sub-dependency. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Link: http://lkml.kernel.org/r/1363262077.1335.71.camel@x61.thuisdomein Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-27x86/tlb: add tlb_flushall_shift knob into debugfsAlex Shi
kernel will replace cr3 rewrite with invlpg when tlb_flush_entries <= active_tlb_entries / 2^tlb_flushall_factor if tlb_flushall_factor is -1, kernel won't do this replacement. User can modify its value according to specific CPU/applications. Thanks for Borislav providing the help message of CONFIG_DEBUG_TLBFLUSH. Signed-off-by: Alex Shi <alex.shi@intel.com> Link: http://lkml.kernel.org/r/1340845344-27557-6-git-send-email-alex.shi@intel.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-01-11Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel config: Fix the APB_TIMER selection x86/mrst: Add additional debug prints for pb_keys x86/intel config: Revamp configuration to allow for Moorestown and Medfield x86/intel/scu/ipc: Match the changes in the x86 configuration x86/apb: Fix configuration constraints x86: Fix INTEL_MID silly x86/Kconfig: Cyclone-timer depends on x86-summit x86: Reduce clock calibration time during slave cpu startup x86/config: Revamp configuration for MID devices x86/sfi: Kill the IRQ as id hack
2011-12-07x86, NMI: NMI selftest depends on the local apicDon Zickus
The selftest doesn't work with out a local apic for now. Reported-by: Randy Durlap <rdunlap@xenotime.net> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20111207210630.GI1669@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86/config: Revamp configuration for MID devicesAlan Cox
This follows on from the patch applied in 3.2rc1 which creates an INTEL_MID configuration. We can now add the entry for Medfield specific code. After this is merged the final patch will be submitted which moves the rest of the device Kconfig dependancies to MRST/MEDFIELD/INTEL_MID as appropriate. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86, NMI: Add NMI IPI selftestDon Zickus
The previous patch modified the stop cpus path to use NMI instead of IRQ as the way to communicate to the other cpus to shutdown. There were some concerns that various machines may have problems with using an NMI IPI. This patch creates a selftest to check if NMI is working at boot. The idea is to help catch any issues before the machine panics and we learn the hard way. Loosely based on the locking-selftest.c file, this separate file runs a couple of simple tests and reports the results. The output looks like: ... Brought up 4 CPUs ---------------- | NMI testsuite: -------------------- remote IPI: ok | local IPI: ok | -------------------- Good, all 2 testcases passed! | --------------------------------- Total of 4 processors activated (21330.61 BogoMIPS). ... Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: seiji.aguchi@hds.com Cc: vgoyal@redhat.com Cc: mjg@redhat.com Cc: tony.luck@intel.com Cc: gong.chen@intel.com Cc: satoru.moriya@hds.com Cc: avi@redhat.com Cc: Andi Kleen <andi@firstfloor.org> Link: http://lkml.kernel.org/r/1318533267-18880-3-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>