summaryrefslogtreecommitdiff
path: root/arch/x86/boot
AgeCommit message (Collapse)Author
2018-05-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "An unfortunately larger set of fixes, but a large portion is selftests: - Fix the missing clusterid initializaiton for x2apic cluster management which caused boot failures due to IPIs being sent to the wrong cluster - Drop TX_COMPAT when a 64bit executable is exec()'ed from a compat task - Wrap access to __supported_pte_mask in __startup_64() where clang compile fails due to a non PC relative access being generated. - Two fixes for 5 level paging fallout in the decompressor: - Handle GOT correctly for paging_prepare() and cleanup_trampoline() - Fix the page table handling in cleanup_trampoline() to avoid page table corruption. - Stop special casing protection key 0 as this is inconsistent with the manpage and also inconsistent with the allocation map handling. - Override the protection key wen moving away from PROT_EXEC to prevent inaccessible memory. - Fix and update the protection key selftests to address breakage and to cover the above issue - Add a MOV SS self test" [ Part of the x86 fixes were in the earlier core pull due to dependencies ] * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/mm: Drop TS_COMPAT on 64-bit exec() syscall x86/apic/x2apic: Initialize cluster ID properly x86/boot/compressed/64: Fix moving page table out of trampoline memory x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline() x86/pkeys: Do not special case protection key 0 x86/pkeys/selftests: Add a test for pkey 0 x86/pkeys/selftests: Save off 'prot' for allocations x86/pkeys/selftests: Fix pointer math x86/pkeys: Override pkey when moving away from PROT_EXEC x86/pkeys/selftests: Fix pkey exhaustion test off-by-one x86/pkeys/selftests: Add PROT_EXEC test x86/pkeys/selftests: Factor out "instruction page" x86/pkeys/selftests: Allow faults on unknown keys x86/pkeys/selftests: Avoid printf-in-signal deadlocks x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal x86/pkeys/selftests: Stop using assert() x86/pkeys/selftests: Give better unexpected fault error messages x86/selftests: Add mov_to_ss test x86/mpx/selftests: Adjust the self-test to fresh distros that export the MPX ABI x86/pkeys/selftests: Adjust the self-test to fresh distros that export the pkeys ABI ...
2018-05-16x86/boot/compressed/64: Fix moving page table out of trampoline memoryKirill A. Shutemov
cleanup_trampoline() relocates the top-level page table out of trampoline memory. We use 'top_pgtable' as our new top-level page table. But if the 'top_pgtable' would be referenced from C in a usual way, the address of the table will be calculated relative to RIP. After kernel gets relocated, the address will be in the middle of decompression buffer and the page table may get overwritten. This leads to a crash. We calculate the address of other page tables relative to the relocation address. It makes them safe. We should do the same for 'top_pgtable'. Calculate the address of 'top_pgtable' in assembly and pass down to cleanup_trampoline(). Move the page table to .pgtable section where the rest of page tables are. The section is @nobits so we save 4k in kernel image. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: e9d0e6330eb8 ("x86/boot/compressed/64: Prepare new top-level page table for trampoline") Link: http://lkml.kernel.org/r/20180516080131.27913-3-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-16x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline()Kirill A. Shutemov
Eric and Hugh have reported instant reboot due to my recent changes in decompression code. The root cause is that I didn't realize that we need to adjust GOT to be able to run C code that early. The problem is only visible with an older toolchain. Binutils >= 2.24 is able to eliminate GOT references by replacing them with RIP-relative address loads: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=80d873266dec We need to adjust GOT two times: - before calling paging_prepare() using the initial load address - before calling C code from the relocated kernel Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 194a9749c73d ("x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G") Link: http://lkml.kernel.org/r/20180516080131.27913-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-14efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' ↵Ard Biesheuvel
definition for mixed mode Mixed mode allows a kernel built for x86_64 to interact with 32-bit EFI firmware, but requires us to define all struct definitions carefully when it comes to pointer sizes. 'struct efi_pci_io_protocol_32' currently uses a 'void *' for the 'romimage' field, which will be interpreted as a 64-bit field on such kernels, potentially resulting in bogus memory references and subsequent crashes. Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180504060003.19618-13-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-12x86/mm: Do not auto-massage page protectionsDave Hansen
A PTE is constructed from a physical address and a pgprotval_t. __PAGE_KERNEL, for instance, is a pgprot_t and must be converted into a pgprotval_t before it can be used to create a PTE. This is done implicitly within functions like pfn_pte() by massage_pgprot(). However, this makes it very challenging to set bits (and keep them set) if your bit is being filtered out by massage_pgprot(). This moves the bit filtering out of pfn_pte() and friends. For users of PAGE_KERNEL*, filtering will be done automatically inside those macros but for users of __PAGE_KERNEL*, they need to do their own filtering now. Note that we also just move pfn_pte/pmd/pud() over to check_pgprot() instead of massage_pgprot(). This way, we still *look* for unsupported bits and properly warn about them if we find them. This might happen if an unfiltered __PAGE_KERNEL* value was passed in, for instance. - printk format warning fix from: Arnd Bergmann <arnd@arndb.de> - boot crash fix from: Tom Lendacky <thomas.lendacky@amd.com> - crash bisected by: Mike Galbraith <efault@gmx.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-and-fixed-by: Arnd Bergmann <arnd@arndb.de> Fixed-by: Tom Lendacky <thomas.lendacky@amd.com> Bisected-by: Mike Galbraith <efault@gmx.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180406205509.77E1D7F6@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-02Merge branch 'efi-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The main EFI changes in this cycle were: - Fix the apple-properties code (Andy Shevchenko) - Add WARN() on arm64 if UEFI Runtime Services corrupt the reserved x18 register (Ard Biesheuvel) - Use efi_switch_mm() on x86 instead of manipulating %cr3 directly (Sai Praneeth) - Fix early memremap leak in ESRT code (Ard Biesheuvel) - Switch to L"xxx" notation for wide string literals (Ard Biesheuvel) - ... plus misc other cleanups and bugfixes" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Use efi_switch_mm() rather than manually twiddling with %cr3 x86/efi: Replace efi_pgd with efi_mm.pgd efi: Use string literals for efi_char16_t variable initializers efi/esrt: Fix handling of early ESRT table mapping efi: Use efi_mm in x86 as well as ARM efi: Make const array 'apple' static efi/apple-properties: Use memremap() instead of ioremap() efi: Reorder pr_notice() with add_device_randomness() call x86/efi: Replace GFP_ATOMIC with GFP_KERNEL in efi_query_variable_store() efi/arm64: Check whether x18 is preserved by runtime services calls efi/arm*: Stop printing addresses of virtual mappings efi/apple-properties: Remove redundant attribute initialization from unmarshal_key_value_pairs() efi/arm*: Only register page tables when they exist
2018-04-02Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: - Extend the memmap= boot parameter syntax to allow the redeclaration and dropping of existing ranges, and to support all e820 range types (Jan H. Schönherr) - Improve the W+X boot time security checks to remove false positive warnings on Xen (Jan Beulich) - Support booting as Xen PVH guest (Juergen Gross) - Improved 5-level paging (LA57) support, in particular it's possible now to have a single kernel image for both 4-level and 5-level hardware (Kirill A. Shutemov) - AMD hardware RAM encryption support (SME/SEV) fixes (Tom Lendacky) - Preparatory commits for hardware-encrypted RAM support on Intel CPUs. (Kirill A. Shutemov) - Improved Intel-MID support (Andy Shevchenko) - Show EFI page tables in page_tables debug files (Andy Lutomirski) - ... plus misc fixes and smaller cleanups * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits) x86/cpu/tme: Fix spelling: "configuation" -> "configuration" x86/boot: Fix SEV boot failure from change to __PHYSICAL_MASK_SHIFT x86/mm: Update comment in detect_tme() regarding x86_phys_bits x86/mm/32: Remove unused node_memmap_size_bytes() & CONFIG_NEED_NODE_MEMMAP_SIZE logic x86/mm: Remove pointless checks in vmalloc_fault x86/platform/intel-mid: Add special handling for ACPI HW reduced platforms ACPI, x86/boot: Introduce the ->reduced_hw_early_init() ACPI callback ACPI, x86/boot: Split out acpi_generic_reduce_hw_init() and export x86/pconfig: Provide defines and helper to run MKTME_KEY_PROG leaf x86/pconfig: Detect PCONFIG targets x86/tme: Detect if TME and MKTME is activated by BIOS x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G x86/boot/compressed/64: Use page table in trampoline memory x86/boot/compressed/64: Use stack from trampoline memory x86/boot/compressed/64: Make sure we have a 32-bit code segment x86/mm: Do not use paravirtualized calls in native_set_p4d() kdump, vmcoreinfo: Export pgtable_l5_enabled value x86/boot/compressed/64: Prepare new top-level page table for trampoline x86/boot/compressed/64: Set up trampoline memory x86/boot/compressed/64: Save and restore trampoline memory ...
2018-04-02Merge branch 'x86-build-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build updates from Ingo Molnar: "The biggest change is the forcing of asm-goto support on x86, which effectively increases the GCC minimum supported version to gcc-4.5 (on x86)" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Don't pass in -D__KERNEL__ multiple times x86: Remove FAST_FEATURE_TESTS x86: Force asm-goto x86/build: Drop superfluous ALIGN from the linker script
2018-03-31x86/build: Don't pass in -D__KERNEL__ multiple timesCao jin
Some .<target>.cmd files under arch/x86 are showing two instances of -D__KERNEL__, like arch/x86/boot/ and arch/x86/realmode/rm/. __KERNEL__ is already defined in KBUILD_CPPFLAGS in the top Makefile, so it can be dropped safely. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/20180316084944.3997-1-caoj.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-28x86/boot: Fix SEV boot failure from change to __PHYSICAL_MASK_SHIFTTom Lendacky
In arch/x86/boot/compressed/kaslr_64.c, CONFIG_AMD_MEM_ENCRYPT support was initially #undef'd to support SME with minimal effort. When support for SEV was added, the #undef remained and some minimal support for setting the encryption bit was added for building identity mapped pagetable entries. Commit b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52") changed __PHYSICAL_MASK_SHIFT from 46 to 52 in support of 5-level paging. This change resulted in SEV guests failing to boot because the encryption bit was no longer being automatically masked out. The compressed boot path now requires sme_me_mask to be defined in order for the pagetable functions, such as pud_present(), to properly mask out the encryption bit (currently bit 47) when evaluating pagetable entries. Add an sme_me_mask variable in arch/x86/boot/compressed/mem_encrypt.S, which is set when SEV is active, delete the #undef CONFIG_AMD_MEM_ENCRYPT from arch/x86/boot/compressed/kaslr_64.c and use sme_me_mask when building the identify mapped pagetable entries. Fixes: b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180327220711.8702.55842.stgit@tlendack-t1.amdoffice.net
2018-03-27Merge tag 'v4.16-rc7' into x86/mm, to fix up conflictIngo Molnar
Conflicts: arch/x86/mm/init_64.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-25Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 and PTI fixes from Ingo Molnar: "Misc fixes: - fix EFI pagetables freeing - fix vsyscall pagetable setting on Xen PV guests - remove ancient CONFIG_X86_PPRO_FENCE=y - x86 is TSO again - fix two binutils (ld) development version related incompatibilities - clean up breakpoint handling - fix an x86 self-test" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Don't use IST entry for #BP stack x86/efi: Free efi_pgd with free_pages() x86/vsyscall/64: Use proper accessor to update P4D entry x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk x86/boot/64: Verify alignment of the LOAD segment x86/build/64: Force the linker to use 2MB page size selftests/x86/ptrace_syscall: Fix for yet more glibc interference
2018-03-20x86/boot/64: Verify alignment of the LOAD segmentH.J. Lu
Since the x86-64 kernel must be aligned to 2MB, refuse to boot the kernel if the alignment of the LOAD segment isn't a multiple of 2MB. Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CAMe9rOrR7xSJgUfiCoZLuqWUwymRxXPoGBW38%2BpN%3D9g%2ByKNhZw@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4GKirill A. Shutemov
This patch addresses a shortcoming in current boot process on machines that supports 5-level paging. If a bootloader enables 64-bit mode with 4-level paging, we might need to switch over to 5-level paging. The switching requires the disabling paging. It works fine if kernel itself is loaded below 4G. But if the bootloader put the kernel above 4G (not sure if anybody does this), we would lose control as soon as paging is disabled, because the code becomes unreachable to the CPU. This patch implements a trampoline in lower memory to handle this situation. We only need the memory for a very short time, until the main kernel image sets up own page tables. We go through the trampoline even if we don't have to: if we're already in 5-level paging mode or if we don't need to switch to it. This way the trampoline gets tested on every boot. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180312100246.89175-5-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/boot/compressed/64: Use page table in trampoline memoryKirill A. Shutemov
If a bootloader enables 64-bit mode with 4-level paging, we might need to switch over to 5-level paging. The switching requires the disabling paging. It works fine if kernel itself is loaded below 4G. But if the bootloader put the kernel above 4G (i.e. in kexec() case), we would lose control as soon as paging is disabled, because the code becomes unreachable to the CPU. To handle the situation, we need a trampoline in lower memory that would take care of switching on 5-level paging. Apart from the trampoline code itself we also need a place to store top-level page table in lower memory as we don't have a way to load 64-bit values into CR3 in 32-bit mode. We only really need 8 bytes there as we only use the very first entry of the page table. But we allocate a whole page anyway. This patch switches 32-bit code to use page table in trampoline memory. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180312100246.89175-4-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/boot/compressed/64: Use stack from trampoline memoryKirill A. Shutemov
As the first step on using trampoline memory, let's make 32-bit code use stack there. Separate stack is required to return back from trampoline and we cannot user stack from 64-bit mode as it may be above 4G. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180312100246.89175-3-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/boot/compressed/64: Make sure we have a 32-bit code segmentKirill A. Shutemov
When kernel starts in 64-bit mode we inherit the GDT from the bootloader. It may cause a problem if the GDT doesn't have a 32-bit code segment where we expect it to be. Load our own GDT with known segments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180312100246.89175-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12efi: Use string literals for efi_char16_t variable initializersArd Biesheuvel
Now that we unambiguously build the entire kernel with -fshort-wchar, it is no longer necessary to open code efi_char16_t[] initializers as arrays of characters, and we can move to the L"xxx" notation instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180312084500.10764-6-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/boot/compressed/64: Prepare new top-level page table for trampolineKirill A. Shutemov
If trampoline code would need to switch between 4- and 5-level paging modes, we have to use a page table in trampoline memory. Having it in trampoline memory guarantees that it's below 4G and we can point CR3 to it from 32-bit trampoline code. We only use the page table if the desired paging mode doesn't match the mode we are in. Otherwise the page table is unused and trampoline code wouldn't touch CR3. For 4- to 5-level paging transition, we set up current (4-level paging) CR3 as the first and the only entry in a new top-level page table. For 5- to 4-level paging transition, copy page table pointed by first entry in the current top-level page table as our new top-level page table. If the page table is used by trampoline we would need to copy it to new page table outside trampoline and update CR3 before restoring trampoline memory. Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180226180451.86788-6-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/boot/compressed/64: Set up trampoline memoryKirill A. Shutemov
This patch clears up trampoline memory and copies trampoline code in place. It's not yet used though. Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180226180451.86788-5-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/boot/compressed/64: Save and restore trampoline memoryKirill A. Shutemov
The memory area we found for trampoline shouldn't contain anything useful. But let's preserve the data anyway. Just to be on safe side. paging_prepare() would save the data into a buffer. cleanup_trampoline() would restore it back once we are done with the trampoline. Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180226180451.86788-4-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/boot/compressed/64: Find a place for 32-bit trampolineKirill A. Shutemov
If a bootloader enables 64-bit mode with 4-level paging, we might need to switch over to 5-level paging. The switching requires the disabling of paging, which works fine if kernel itself is loaded below 4G. But if the bootloader puts the kernel above 4G (not sure if anybody does this), we would lose control as soon as paging is disabled, because the code becomes unreachable to the CPU. To handle the situation, we need a trampoline in lower memory that would take care of switching on 5-level paging. This patch finds a spot in low memory for a trampoline. The heuristic is based on code in reserve_bios_regions(). We find the end of low memory based on BIOS and EBDA start addresses. The trampoline is put just before end of low memory. It's mimic approach taken to allocate memory for realtime trampoline. Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180226180451.86788-3-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/boot/compressed/64: Describe the logic behind the LA57 checkKirill A. Shutemov
The patch explains the LA57 check in more details. Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180226180451.86788-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09efi: Make const array 'apple' staticColin Ian King
Don't populate the const read-only array 'buf' on the stack but instead make it static. Makes the object code smaller by 64 bytes: Before: text data bss dec hex filename 9264 1 16 9281 2441 arch/x86/boot/compressed/eboot.o After: text data bss dec hex filename 9200 1 16 9217 2401 arch/x86/boot/compressed/eboot.o (GCC version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180308080020.22828-13-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-26Merge branch 'x86/boot' into x86/mm, to unify branchesIngo Molnar
Both x86/mm and x86/boot contain 5-level paging related patches, unify them to have a single tree to work against. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-26Merge tag 'v4.16-rc3' into x86/mm, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-22treewide/trivial: Remove ';;$' typo noiseIngo Molnar
On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/mm: Optimize boot-time paging mode switching costKirill A. Shutemov
By this point we have functioning boot-time switching between 4- and 5-level paging mode. But naive approach comes with cost. Numbers below are for kernel build, allmodconfig, 5 times. CONFIG_X86_5LEVEL=n: Performance counter stats for 'sh -c make -j100 -B -k >/dev/null' (5 runs): 17308719.892691 task-clock:u (msec) # 26.772 CPUs utilized ( +- 0.11% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 331,993,164 page-faults:u # 0.019 M/sec ( +- 0.01% ) 43,614,978,867,455 cycles:u # 2.520 GHz ( +- 0.01% ) 39,371,534,575,126 stalled-cycles-frontend:u # 90.27% frontend cycles idle ( +- 0.09% ) 28,363,350,152,428 instructions:u # 0.65 insn per cycle # 1.39 stalled cycles per insn ( +- 0.00% ) 6,316,784,066,413 branches:u # 364.948 M/sec ( +- 0.00% ) 250,808,144,781 branch-misses:u # 3.97% of all branches ( +- 0.01% ) 646.531974142 seconds time elapsed ( +- 1.15% ) CONFIG_X86_5LEVEL=y: Performance counter stats for 'sh -c make -j100 -B -k >/dev/null' (5 runs): 17411536.780625 task-clock:u (msec) # 26.426 CPUs utilized ( +- 0.10% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 331,868,663 page-faults:u # 0.019 M/sec ( +- 0.01% ) 43,865,909,056,301 cycles:u # 2.519 GHz ( +- 0.01% ) 39,740,130,365,581 stalled-cycles-frontend:u # 90.59% frontend cycles idle ( +- 0.05% ) 28,363,358,997,959 instructions:u # 0.65 insn per cycle # 1.40 stalled cycles per insn ( +- 0.00% ) 6,316,784,937,460 branches:u # 362.793 M/sec ( +- 0.00% ) 251,531,919,485 branch-misses:u # 3.98% of all branches ( +- 0.00% ) 658.886307752 seconds time elapsed ( +- 0.92% ) The patch tries to fix the performance regression by using cpu_feature_enabled(X86_FEATURE_LA57) instead of pgtable_l5_enabled in all hot code paths. These will statically patch the target code for additional performance. CONFIG_X86_5LEVEL=y + the patch: Performance counter stats for 'sh -c make -j100 -B -k >/dev/null' (5 runs): 17381990.268506 task-clock:u (msec) # 26.907 CPUs utilized ( +- 0.19% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 331,862,625 page-faults:u # 0.019 M/sec ( +- 0.01% ) 43,697,726,320,051 cycles:u # 2.514 GHz ( +- 0.03% ) 39,480,408,690,401 stalled-cycles-frontend:u # 90.35% frontend cycles idle ( +- 0.05% ) 28,363,394,221,388 instructions:u # 0.65 insn per cycle # 1.39 stalled cycles per insn ( +- 0.00% ) 6,316,794,985,573 branches:u # 363.410 M/sec ( +- 0.00% ) 251,013,232,547 branch-misses:u # 3.97% of all branches ( +- 0.01% ) 645.991174661 seconds time elapsed ( +- 1.19% ) Unfortunately, this approach doesn't help with text size: vmlinux.before .text size: 8190319 vmlinux.after .text size: 8200623 The .text section is increased by about 4k. Not sure if we can do anything about this. Signed-off-by: Kirill A. Shuemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180216114948.68868-4-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-16x86/mm: Allow to boot without LA57 if CONFIG_X86_5LEVEL=yKirill A. Shutemov
All pieces of the puzzle are in place and we can now allow to boot with CONFIG_X86_5LEVEL=y on a machine without LA57 support. Kernel will detect that LA57 is missing and fold p4d at runtime. Update the documentation and the Kconfig option description to reflect the change. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180214182542.69302-10-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-16x86/mm: Initialize 'pgdir_shift' and 'ptrs_per_p4d' at boot-timeKirill A. Shutemov
Switching between paging modes requires the folding of the p4d page table level when we only have 4 paging levels, which means we need to adjust 'pgdir_shift' and 'ptrs_per_p4d' during early boot according to paging mode. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180214182542.69302-3-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-16x86/mm: Initialize 'pgtable_l5_enabled' at boot-timeKirill A. Shutemov
'pgtable_l5_enabled' indicates which paging mode we are using. We need to initialize it at boot-time according to machine capability. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180214182542.69302-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-14x86/mm: Make PGDIR_SHIFT and PTRS_PER_P4D variableKirill A. Shutemov
For boot-time switching between 4- and 5-level paging we need to be able to fold p4d page table level at runtime. It requires variable PGDIR_SHIFT and PTRS_PER_P4D. The change doesn't affect the kernel image size much: text data bss dec hex filename 8628091 4734304 1368064 14730459 e0c4db vmlinux.before 8628393 4734340 1368064 14730797 e0c62d vmlinux.after Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180214111656.88514-7-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-14x86/mm: Introduce 'pgtable_l5_enabled'Kirill A. Shutemov
The new flag would indicate what paging mode we are in. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180214111656.88514-5-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-11x86/boot/compressed/64: Introduce paging_prepare()Kirill A. Shutemov
Rename l5_paging_required() to paging_prepare() and change the interface of the function. This is a preparation for the next patch, which would make the function also allocate memory for the 32-bit trampoline. The function now returns a 128-bit structure. RAX would return trampoline memory address (zero for now) and RDX would indicate if we need to enable 5-level paging. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [ Typo fixes and general clarification. ] Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@suse.de> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180209142228.21231-3-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-11x86/boot/compressed/64: Rename pagetable.c to kaslr_64.cKirill A. Shutemov
The name of the file -- pagetable.c -- is misleading: it only contains helpers used for KASLR in 64-bit mode. Let's rename the file to reflect its content. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@suse.de> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180209142228.21231-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-31Merge branch 'next-tpm' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull tpm updates from James Morris: - reduce polling delays in tpm_tis - support retrieving TPM 2.0 Event Log through EFI before ExitBootServices - replace tpm-rng.c with a hwrng device managed by the driver for each TPM device - TPM resource manager synthesizes TPM_RC_COMMAND_CODE response instead of returning -EINVAL for unknown TPM commands. This makes user space more sound. - CLKRUN fixes: * Keep #CLKRUN disable through the entier TPM command/response flow * Check whether #CLKRUN is enabled before disabling and enabling it again because enabling it breaks PS/2 devices on a system where it is disabled * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: remove unused variables tpm: remove unused data fields from I2C and OF device ID tables tpm: only attempt to disable the LPC CLKRUN if is already enabled tpm: follow coding style for variable declaration in tpm_tis_core_init() tpm: delete the TPM_TIS_CLK_ENABLE flag tpm: Update MAINTAINERS for Jason Gunthorpe tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd() tpm_tis: Move ilb_base_addr to tpm_tis_data tpm2-cmd: allow more attempts for selftest execution tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented tpm: Move Linux RNG connection to hwrng tpm: use struct tpm_chip for tpm_chip_find_get() tpm: parse TPM event logs based on EFI table efi: call get_event_log before ExitBootServices tpm: add event log format version tpm: rename event log provider files tpm: move tpm_eventlog.h outside of drivers folder tpm: use tpm_msleep() value as max delay tpm: reduce tpm polling delay in tpm_tis_core tpm: move wait_for_tpm_stat() to respective driver files
2018-01-08efi: call get_event_log before ExitBootServicesThiebaud Weksteen
With TPM 2.0 specification, the event logs may only be accessible by calling an EFI Boot Service. Modify the EFI stub to copy the log area to a new Linux-specific EFI configuration table so it remains accessible once booted. When calling this service, it is possible to specify the expected format of the logs: TPM 1.2 (SHA1) or TPM 2.0 ("Crypto Agile"). For now, only the first format is retrieved. Signed-off-by: Thiebaud Weksteen <tweek@google.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-12-31Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of fixlets for x86: - Fix the ESPFIX double fault handling for 5-level pagetables - Fix the commandline parsing for 'apic=' on 32bit systems and update documentation - Make zombie stack traces reliable - Fix kexec with stack canary - Fix the delivery mode for APICs which was missed when the x86 vector management was converted to single target delivery. Caused a regression due to the broken hardware which ignores affinity settings in lowest prio delivery mode. - Unbreak modules when AMD memory encryption is enabled - Remove an unused parameter of prepare_switch_to" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Switch all APICs to Fixed delivery mode x86/apic: Update the 'apic=' description of setting APIC driver x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR) x86: Remove unused parameter of prepare_switch_to x86/stacktrace: Make zombie stack traces reliable x86/mm: Unbreak modules that use the DMA API x86/build: Make isoimage work on Debian x86/espfix/64: Fix espfix double-fault handling on 5-level systems
2017-12-29Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 page table isolation updates from Thomas Gleixner: "This is the final set of enabling page table isolation on x86: - Infrastructure patches for handling the extra page tables. - Patches which map the various bits and pieces which are required to get in and out of user space into the user space visible page tables. - The required changes to have CR3 switching in the entry/exit code. - Optimizations for the CR3 switching along with documentation how the ASID/PCID mechanism works. - Updates to dump pagetables to cover the user space page tables for W+X scans and extra debugfs files to analyze both the kernel and the user space visible page tables The whole functionality is compile time controlled via a config switch and can be turned on/off on the command line as well" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) x86/ldt: Make the LDT mapping RO x86/mm/dump_pagetables: Allow dumping current pagetables x86/mm/dump_pagetables: Check user space page table for WX pages x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy x86/mm/pti: Add Kconfig x86/dumpstack: Indicate in Oops whether PTI is configured and enabled x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming x86/mm: Use INVPCID for __native_flush_tlb_single() x86/mm: Optimize RESTORE_CR3 x86/mm: Use/Fix PCID to optimize user/kernel switches x86/mm: Abstract switching CR3 x86/mm: Allow flushing for future ASID switches x86/pti: Map the vsyscall page if needed x86/pti: Put the LDT in its own PGD if PTI is on x86/mm/64: Make a full PGD-entry size hole in the memory map x86/events/intel/ds: Map debug buffers in cpu_entry_area x86/cpu_entry_area: Add debugstore entries to cpu_entry_area x86/mm/pti: Map ESPFIX into user space x86/mm/pti: Share entry text PMD x86/entry: Align entry text section to PMD boundary ...
2017-12-23x86/mm/pti: Add infrastructure for page table isolationThomas Gleixner
Add the initial files for kernel page table isolation, with a minimal init function and the boot time detection for this misfeature. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-16x86/build: Make isoimage work on DebianMatthew Wilcox
Debian does not ship a 'mkisofs' symlink to genisoimage. All modern distros ship genisoimage, so just use that directly. That requires renaming the 'genisoimage' function. Also neaten up the 'for' loop while I'm in here. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-11x86/build: Don't verify mtools configuration file for isoimageChangbin Du
If mtools.conf is not generated before, 'make isoimage' could complain: Kernel: arch/x86/boot/bzImage is ready (#597) GENIMAGE arch/x86/boot/image.iso *** Missing file: arch/x86/boot/mtools.conf arch/x86/boot/Makefile:144: recipe for target 'isoimage' failed mtools.conf is not used for isoimage generation, so do not check it. Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4366d57af1 ("x86/build: Factor out fdimage/isoimage generation commands to standalone script") Link: http://lkml.kernel.org/r/1512053480-8083-1-git-send-email-changbin.du@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-07x86/boot/compressed/64: Print error if 5-level paging is not supportedKirill A. Shutemov
If the machine does not support the paging mode for which the kernel was compiled, the boot process cannot continue. It's not possible to let the kernel detect the mismatch as it does not even reach the point where cpu features can be evaluted due to a triple fault in the KASLR setup. Instead of instantaneous silent reboot, emit an error message which gives the user the information why the boot fails. Fixes: 77ef56e4f0fb ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y") Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: linux-mm@kvack.org Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20171204124059.63515-3-kirill.shutemov@linux.intel.com
2017-12-07x86/boot/compressed/64: Detect and handle 5-level paging at boot-timeKirill A. Shutemov
Prerequisite for fixing the current problem of instantaneous reboots when a 5-level paging kernel is booted on 4-level paging hardware. At the same time this change prepares the decompression code to boot-time switching between 4- and 5-level paging. [ tglx: Folded the GCC < 5 fix. ] Fixes: 77ef56e4f0fb ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: linux-mm@kvack.org Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20171204124059.63515-2-kirill.shutemov@linux.intel.com
2017-11-23x86/boot/KASLR: Remove unused variableChao Fan
There are two variables "rc" in mem_avoid_memmap. One at the top of the function and another one inside the while() loop. Drop the outer one as it is unused. Cleanup some whitespace damage while at it. Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: n-horiguchi@ah.jp.nec.com Cc: keescook@chromium.org Link: https://lkml.kernel.org/r/20171123090847.15293-1-fanc.fnst@cn.fujitsu.com
2017-11-13Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Two changes: Propagate const/__initconst, and use ARRAY_SIZE() some more" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/events/amd/iommu: Make iommu_pmu const and __initconst x86: Use ARRAY_SIZE
2017-11-13Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "Three smaller changes: - clang fix - boot message beautification - unnecessary header inclusion removal" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Disable Clang warnings about GNU extensions x86/boot: Remove unnecessary #include <generated/utsrelease.h> x86/boot: Spell out "boot CPU" for BP
2017-11-09x86/build: Make the boot image generation less verboseChangbin Du
This change suppresses the 'dd' output and adds the '-quiet' parameter to mkisofs tool. It also removes the 'Using ...' messages, as none of the messages matter to the user normally. "make V=1" can still be used for a more verbose build. The new build messages are now a streamlined set of: $ make isoimage ... Kernel: arch/x86/boot/bzImage is ready (#75) GENIMAGE arch/x86/boot/image.iso Kernel: arch/x86/boot/image.iso is ready Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1510207751-22166-1-git-send-email-changbin.du@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07x86/boot: Add early boot support when running with SEV activeTom Lendacky
Early in the boot process, add checks to determine if the kernel is running with Secure Encrypted Virtualization (SEV) active. Checking for SEV requires checking that the kernel is running under a hypervisor (CPUID 0x00000001, bit 31), that the SEV feature is available (CPUID 0x8000001f, bit 1) and then checking a non-interceptable SEV MSR (0xc0010131, bit 0). This check is required so that during early compressed kernel booting the pagetables (both the boot pagetables and KASLR pagetables (if enabled) are updated to include the encryption mask so that when the kernel is decompressed into encrypted memory, it can boot properly. After the kernel is decompressed and continues booting the same logic is used to check if SEV is active and set a flag indicating so. This allows to distinguish between SME and SEV, each of which have unique differences in how certain things are handled: e.g. DMA (always bounce buffered with SEV) or EFI tables (always access decrypted with SME). Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Laura Abbott <labbott@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: kvm@vger.kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20171020143059.3291-13-brijesh.singh@amd.com
2017-11-07x86/build: Add more generated files to the .gitignore fileChangbin Du
Some of the files generated by the build process were not listed. Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: yamada.masahiro@socionext.com Link: http://lkml.kernel.org/r/1509939179-7556-5-git-send-email-changbin.du@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-15 09:10:55 +0000