| Age | Commit message (Collapse) | Author |
|---|
|
Hyper-V cleanup code comes under panic path where preemption and irq
is already disabled. So calling of unregister_syscore_ops might schedule
out the thread even for the case where mutex lock is free.
hyperv_cleanup
unregister_syscore_ops
mutex_lock(&syscore_ops_lock)
might_sleep
Here might_sleep might schedule out this thread, where voluntary preemption
config is on and this thread will never comes back. And also this was added
earlier to maintain the symmetry which is not required as this can comes
during crash shutdown path only.
To prevent the same, removing unregister_syscore_ops function call.
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1669443291-2575-1-git-send-email-gauravkohli@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Microsoft Hypervisor root partition has to map the TSC page specified
by the hypervisor, instead of providing the page to the hypervisor like
it's done in the guest partitions.
However, it's too early to map the page when the clock is initialized, so, the
actual mapping is happening later.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-hyperv@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166759443644.385891.15921594265843430260.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Commit e5d9b714fe40 ("x86/hyperv: fix root partition faults when writing
to VP assist page MSR") moved 'wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE)' under
'if (*hvp)' condition. This works for root partition as hv_cpu_die()
does memunmap() and sets 'hv_vp_assist_page[cpu]' to NULL but breaks
non-root partitions as hv_cpu_die() doesn't free 'hv_vp_assist_page[cpu]'
for them. This causes VP assist page to remain unset after CPU
offline/online cycle:
$ rdmsr -p 24 0x40000073
10212f001
$ echo 0 > /sys/devices/system/cpu/cpu24/online
$ echo 1 > /sys/devices/system/cpu/cpu24/online
$ rdmsr -p 24 0x40000073
0
Fix the issue by always writing to HV_X64_MSR_VP_ASSIST_PAGE in
hv_cpu_init(). Note, checking 'if (!*hvp)', for root partition is
pointless as hv_cpu_die() always sets 'hv_vp_assist_page[cpu]' to
NULL (and it's also NULL initially).
Note: the fact that 'hv_vp_assist_page[cpu]' is reset to NULL may
present a (potential) issue for KVM. While Hyper-V uses
CPUHP_AP_ONLINE_DYN stage in CPU hotplug, KVM uses CPUHP_AP_KVM_STARTING
which comes earlier in CPU teardown sequence. It is theoretically
possible that Enlightened VMCS is still in use. It is unclear if the
issue is real and if using KVM with Hyper-V root partition is even
possible.
While on it, drop the unneeded smp_processor_id() call from hv_cpu_init().
Fixes: e5d9b714fe40 ("x86/hyperv: fix root partition faults when writing to VP assist page MSR")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221103190601.399343-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
hyperv_cleanup resets the hypercall page by setting the MSR to 0. However,
the root partition is not allowed to write to the GPA bits of the MSR.
Instead, it uses the hypercall page provided by the MSR. Similar is the
case with the reference TSC MSR.
Clear only the enable bit instead of zeroing the entire MSR to make
the code valid for root partition too.
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221027095729.1676394-3-anrayabh@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The commit 154fb14df7a3c ("x86/hyperv: Replace kmap() with
kmap_local_page()") keeps the BUG_ON() to check if kmap_local_page()
fails.
But in fact, kmap_local_page() always returns a valid kernel address
and won't return NULL here. It will BUG on its own if it fails. [1]
So directly use memcpy_to_page() which creates local mapping to copy.
[1]: https://lore.kernel.org/lkml/YztFEyUA48et0yTt@iweiny-mobl/
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20221020083820.2341088-1-zhao1.liu@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
kmap() is being deprecated in favor of kmap_local_page()[1].
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
In the fuction hyperv_init() of hyperv/hv_init.c, the mapping is used in a
single thread and is short live. So, in this case, it's safe to simply use
kmap_local_page() to create mapping, and this avoids the wasted cost of
kmap() for global synchronization.
In addtion, the fuction hyperv_init() checks if kmap() fails by BUG_ON().
From the original discussion[2], the BUG_ON() here is just used to
explicitly panic NULL pointer. So still keep the BUG_ON() in place to check
if kmap_local_page() fails. Based on this consideration, memcpy_to_page()
is not selected here but only kmap_local_page() is used.
Therefore, replace kmap() with kmap_local_page() in hyperv/hv_init.c.
[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com
[2]: https://lore.kernel.org/lkml/20200915103710.cqmdvzh5lys4wsqo@liuwe-devbox-debian-v2/
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20220928095640.626350-1-zhao1.liu@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The generate_guest_id function is more suitable for use after the
following modifications.
1. The return value of the function is modified to u64.
2. Remove the d_info1 and d_info2 parameters from the function, keep the
u64 type kernel_version parameter.
3. Rename the function to make it clearly a Hyper-V related function,
and modify it to hv_generate_guest_id.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220928064046.3545-1-kunyu@nfschina.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Hyper-V Isolation VM current code uses sev_es_ghcb_hv_call()
to read/write MSR via GHCB page and depends on the sev code.
This may cause regression when sev code changes interface
design.
The latest SEV-ES code requires to negotiate GHCB version before
reading/writing MSR via GHCB page and sev_es_ghcb_hv_call() doesn't
work for Hyper-V Isolation VM. Add Hyper-V ghcb related implementation
to decouple SEV and Hyper-V code. Negotiate GHCB version in the
hyperv_init() and use the version to communicate with Hyper-V
in the ghcb hv call function.
Fixes: 2ea29c5abbc2 ("x86/sev: Save the negotiated GHCB version")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220614014553.1915929-1-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The percpu variable hv_ghcb_pg is incorrectly defined. The __percpu
qualifier should be associated with the union hv_ghcb * (i.e.,
a pointer), not with the target of the pointer. This distinction
makes no difference to gcc and the generated code, but sparse
correctly complains. Fix the definition in the interest of
general correctness in addition to making sparse happy.
No functional change.
Fixes: 0cc4f6d9f0b9 ("x86/hyperv: Initialize GHCB page in Isolation VM")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1640662315-22260-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
hyperv Isolation VM requires bounce buffer support to copy
data from/to encrypted memory and so enable swiotlb force
mode to use swiotlb bounce buffer for DMA transaction.
In Isolation VM with AMD SEV, the bounce buffer needs to be
accessed via extra address space which is above shared_gpa_boundary
(E.G 39 bit address line) reported by Hyper-V CPUID ISOLATION_CONFIG.
The access physical address will be original physical address +
shared_gpa_boundary. The shared_gpa_boundary in the AMD SEV SNP
spec is called virtual top of memory(vTOM). Memory addresses below
vTOM are automatically treated as private while memory above
vTOM is treated as shared.
Swiotlb bounce buffer code calls set_memory_decrypted()
to mark bounce buffer visible to host and map it in extra
address space via memremap. Populate the shared_gpa_boundary
(vTOM) via swiotlb_unencrypted_base variable.
The map function memremap() can't work in the early place
(e.g ms_hyperv_init_platform()) and so call swiotlb_update_mem_
attributes() in the hyperv_init().
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-4-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Explicitly check for MSR_HYPERCALL and MSR_VP_INDEX support when probing
for running as a Hyper-V guest instead of waiting until hyperv_init() to
detect the bogus configuration. Add messages to give the admin a heads
up that they are likely running on a broken virtual machine setup.
At best, silently disabling Hyper-V is confusing and difficult to debug,
e.g. the kernel _says_ it's using all these fancy Hyper-V features, but
always falls back to the native versions. At worst, the half baked setup
will crash/hang the kernel.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20211104182239.1302956-3-seanjc@google.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Check for a valid hv_vp_index array prior to derefencing hv_vp_index when
setting Hyper-V's TSC change callback. If Hyper-V setup failed in
hyperv_init(), the kernel will still report that it's running under
Hyper-V, but will have silently disabled nearly all functionality.
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc2+ #75
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:set_hv_tscchange_cb+0x15/0xa0
Code: <8b> 04 82 8b 15 12 17 85 01 48 c1 e0 20 48 0d ee 00 01 00 f6 c6 08
...
Call Trace:
kvm_arch_init+0x17c/0x280
kvm_init+0x31/0x330
vmx_init+0xba/0x13a
do_one_initcall+0x41/0x1c0
kernel_init_freeable+0x1f2/0x23b
kernel_init+0x16/0x120
ret_from_fork+0x22/0x30
Fixes: 93286261de1b ("x86/hyperv: Reenlightenment notifications support")
Cc: stable@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211104182239.1302956-2-seanjc@google.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The following issue is observed with CONFIG_DEBUG_PREEMPT when KVM loads:
KVM: vmx: using Hyper-V Enlightened VMCS
BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/488
caller is set_hv_tscchange_cb+0x16/0x80
CPU: 1 PID: 488 Comm: systemd-udevd Not tainted 5.15.0-rc5+ #396
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019
Call Trace:
dump_stack_lvl+0x6a/0x9a
check_preemption_disabled+0xde/0xe0
? kvm_gen_update_masterclock+0xd0/0xd0 [kvm]
set_hv_tscchange_cb+0x16/0x80
kvm_arch_init+0x23f/0x290 [kvm]
kvm_init+0x30/0x310 [kvm]
vmx_init+0xaf/0x134 [kvm_intel]
...
set_hv_tscchange_cb() can get preempted in between acquiring
smp_processor_id() and writing to HV_X64_MSR_REENLIGHTENMENT_CONTROL. This
is not an issue by itself: HV_X64_MSR_REENLIGHTENMENT_CONTROL is a
partition-wide MSR and it doesn't matter which particular CPU will be
used to receive reenlightenment notifications. The only real problem can
(in theory) be observed if the CPU whose id was acquired with
smp_processor_id() goes offline before we manage to write to the MSR,
the logic in hv_cpu_die() won't be able to reassign it correctly.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211012155005.1613352-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Fix following checkinclude.pl warning:
./arch/x86/hyperv/hv_init.c: linux/io.h is included more than once.
The include is in line 13. Remove the duplicated here.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211026113249.30481-1-wanjiabing@vivo.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Hyperv provides GHCB protocol to write Synthetic Interrupt
Controller MSR registers in Isolation VM with AMD SEV SNP
and these registers are emulated by hypervisor directly.
Hyperv requires to write SINTx MSR registers twice. First
writes MSR via GHCB page to communicate with hypervisor
and then writes wrmsr instruction to talk with paravisor
which runs in VMPL0. Guest OS ID MSR also needs to be set
via GHCB page.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-7-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add new hvcall guest address host visibility support to mark
memory visible to host. Call it inside set_memory_decrypted
/encrypted(). Add HYPERVISOR feature check in the
hv_is_isolation_supported() to optimize in non-virtualization
environment.
Acked-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-4-ltykernel@gmail.com
[ wei: fix conflicts with tip ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Hyperv exposes GHCB page via SEV ES GHCB MSR for SNP guest
to communicate with hypervisor. Map GHCB page for all
cpus to read/write MSR register and submit hvcall request
via ghcb page.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-2-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
For root partition the VP assist pages are pre-determined by the
hypervisor. The root kernel is not allowed to change them to
different locations. And thus, we are getting below stack as in
current implementation root is trying to perform write to specific
MSR.
[ 2.778197] unchecked MSR access error: WRMSR to 0x40000073 (tried to write 0x0000000145ac5001) at rIP: 0xffffffff810c1084 (native_write_msr+0x4/0x30)
[ 2.784867] Call Trace:
[ 2.791507] hv_cpu_init+0xf1/0x1c0
[ 2.798144] ? hyperv_report_panic+0xd0/0xd0
[ 2.804806] cpuhp_invoke_callback+0x11a/0x440
[ 2.811465] ? hv_resume+0x90/0x90
[ 2.818137] cpuhp_issue_call+0x126/0x130
[ 2.824782] __cpuhp_setup_state_cpuslocked+0x102/0x2b0
[ 2.831427] ? hyperv_report_panic+0xd0/0xd0
[ 2.838075] ? hyperv_report_panic+0xd0/0xd0
[ 2.844723] ? hv_resume+0x90/0x90
[ 2.851375] __cpuhp_setup_state+0x3d/0x90
[ 2.858030] hyperv_init+0x14e/0x410
[ 2.864689] ? enable_IR_x2apic+0x190/0x1a0
[ 2.871349] apic_intr_mode_init+0x8b/0x100
[ 2.878017] x86_late_time_init+0x20/0x30
[ 2.884675] start_kernel+0x459/0x4fb
[ 2.891329] secondary_startup_64_no_verify+0xb0/0xbb
Since the hypervisor already provides the VP assist pages for root
partition, we need to memremap the memory from hypervisor for root
kernel to use. The mapping is done in hv_cpu_init during bringup and is
unmapped in hv_cpu_die during teardown.
Signed-off-by: Praveen Kumar <kumarpraveen@linux.microsoft.com>
Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Link: https://lore.kernel.org/r/20210731120519.17154-1-kumarpraveen@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The check for whether hibernation is possible, and the enabling of
Hyper-V panic notification during kexec, are both architecture neutral.
Move the code from under arch/x86 and into drivers/hv/hv_common.c where
it can also be used for ARM64.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-4-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Architecture independent Hyper-V code calls various arch-specific handlers
when needed. To aid in supporting multiple architectures, provide weak
defaults that can be overridden by arch-specific implementations where
appropriate. But when arch-specific overrides aren't needed or haven't
been implemented yet for a particular architecture, these stubs reduce
the amount of clutter under arch/.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The code to allocate and initialize the hv_vp_index array is
architecture neutral. Similarly, the code to allocate and
populate the hypercall input and output arg pages is architecture
neutral. Move both sets of code out from arch/x86 and into
utility functions in drivers/hv/hv_common.c that can be shared
by Hyper-V initialization on ARM64.
No functional changes. However, the allocation of the hypercall
input and output arg pages is done differently so that the
size is always the Hyper-V page size, even if not the same as
the guest page size (such as with ARM64's 64K page size).
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The extended capability query code is currently under arch/x86, but it
is architecture neutral, and is used by arch neutral code in the Hyper-V
balloon driver. Hence the balloon driver fails to build on other
architectures.
Fix by moving the ext cap code out from arch/x86. Because it is also
called from built-in architecture specific code, it can't be in a module,
so the Makefile treats as built-in even when CONFIG_HYPERV is "m". Also
drivers/Makefile is tweaked because this is the first occurrence of a
Hyper-V file that is built-in even when CONFIG_HYPERV is "m".
While here, update the hypercall status check to use the new helper
function instead of open coding. No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Link: https://lore.kernel.org/r/1622669804-2016-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- VMBus enhancement
- Free page reporting support for Hyper-V balloon driver
- Some patches for running Linux as Arm64 Hyper-V guest
- A few misc clean-up patches
* tag 'hyperv-next-signed-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (30 commits)
drivers: hv: Create a consistent pattern for checking Hyper-V hypercall status
x86/hyperv: Move hv_do_rep_hypercall to asm-generic
video: hyperv_fb: Add ratelimit on error message
Drivers: hv: vmbus: Increase wait time for VMbus unload
Drivers: hv: vmbus: Initialize unload_event statically
Drivers: hv: vmbus: Check for pending channel interrupts before taking a CPU offline
Drivers: hv: vmbus: Drivers: hv: vmbus: Introduce CHANNELMSG_MODIFYCHANNEL_RESPONSE
Drivers: hv: vmbus: Introduce and negotiate VMBus protocol version 5.3
Drivers: hv: vmbus: Use after free in __vmbus_open()
Drivers: hv: vmbus: remove unused function
Drivers: hv: vmbus: Remove unused linux/version.h header
x86/hyperv: remove unused linux/version.h header
x86/Hyper-V: Support for free page reporting
x86/hyperv: Fix unused variable 'hi' warning in hv_apic_read
x86/hyperv: Fix unused variable 'msr_val' warning in hv_qlock_wait
hv: hyperv.h: a few mundane typo fixes
drivers: hv: Fix EXPORT_SYMBOL and tab spaces issue
Drivers: hv: vmbus: Drop error message when 'No request id available'
asm-generic/hyperv: Add missing function prototypes per -W1 warnings
clocksource/drivers/hyper-v: Move handling of STIMER0 interrupts
...
|
|
There is not a consistent pattern for checking Hyper-V hypercall status.
Existing code uses a number of variants. The variants work, but a consistent
pattern would improve the readability of the code, and be more conformant
to what the Hyper-V TLFS says about hypercall status.
Implemented new helper functions hv_result(), hv_result_success(), and
hv_repcomp(). Changed the places where hv_do_hypercall() and related variants
are used to use the helper functions.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Linux has support for free page reporting now (36e66c554b5c) for
virtualized environment. On Hyper-V when virtually backed VMs are
configured, Hyper-V will advertise cold memory discard capability,
when supported. This patch adds the support to hook into the free
page reporting infrastructure and leverage the Hyper-V cold memory
discard hint hypercall to report/free these pages back to the host.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Tested-by: Matheus Castello <matheus@castello.eng.br>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/SN4PR2101MB0880121FA4E2FEC67F35C1DCC0649@SN4PR2101MB0880.namprd21.prod.outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Fix ~144 single-word typos in arch/x86/ code comments.
Doing this in a single commit should reduce the churn.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
|
|
STIMER0 interrupts are most naturally modeled as per-cpu IRQs. But
because x86/x64 doesn't have per-cpu IRQs, the core STIMER0 interrupt
handling machinery is done in code under arch/x86 and Linux IRQs are
not used. Adding support for ARM64 means adding equivalent code
using per-cpu IRQs under arch/arm64.
A better model is to treat per-cpu IRQs as the normal path (which it is
for modern architectures), and the x86/x64 path as the exception. Do this
by incorporating standard Linux per-cpu IRQ allocation into the main
SITMER0 driver code, and bypass it in the x86/x64 exception case. For
x86/x64, special case code is retained under arch/x86, but no STIMER0
interrupt handling code is needed under arch/arm64.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1614721102-2241-11-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
With the new Hyper-V MSR set function, hyperv_report_panic_msg() can be
architecture neutral, so move it out from under arch/x86 and merge into
hv_kmsg_dump(). This move also avoids needing a separate implementation
under arch/arm64.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-5-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Current code defines a separate get and set macro for each Hyper-V
synthetic MSR used by the VMbus driver. Furthermore, the get macro
can't be converted to a standard function because the second argument
is modified in place, which is somewhat bad form.
Redo this by providing a single get and a single set function that
take a parameter specifying the MSR to be operated on. Fixup usage
of the get function. Calling locations are no more complex than before,
but the code under arch/x86 and the upcoming code under arch/arm64
is significantly simplified.
Also standardize the names of Hyper-V synthetic MSRs that are
architecture neutral. But keep the old x86-specific names as aliases
that can be removed later when all references (particularly in KVM
code) have been cleaned up in a separate patch series.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-4-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The Hyper-V page allocator functions are implemented in an architecture
neutral way. Move them into the architecture neutral VMbus module so
a separate implementation for ARM64 is not needed.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When Linux runs as the root partition on Microsoft Hypervisor, its
interrupts are remapped. Linux will need to explicitly map and unmap
interrupts for hardware.
Implement an MSI domain to issue the correct hypercalls. And initialize
this irq domain as the default MSI irq domain.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-16-wei.liu@kernel.org
|
|
When Linux is running as the root partition, the hypercall page will
have already been setup by Hyper-V. Copy the content over to the
allocated page.
Add checks to hv_suspend & co to bail early because they are not
supported in this setup yet.
Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Co-Developed-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Co-Developed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-8-wei.liu@kernel.org
|
|
We will need the partition ID for executing some hypercalls later.
Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-7-wei.liu@kernel.org
|
|
When Linux runs as the root partition, it will need to make hypercalls
which return data from the hypervisor.
Allocate pages for storing results when Linux runs as the root
partition.
Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Co-Developed-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-6-wei.liu@kernel.org
|
|
If bit 22 of Group B Features is set, the guest has access to the
Isolation Configuration CPUID leaf. On x86, the first four bits
of EAX in this leaf provide the isolation type of the partition;
we entail three isolation types: 'SNP' (hardware-based isolation),
'VBS' (software-based isolation), and 'NONE' (no isolation).
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: x86@kernel.org
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20210201144814.2701-2-parri.andrea@gmail.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
With commit 4df4cb9e99f8, the Hyper-V direct-mode STIMER is actually
initialized before LAPIC is initialized: see
apic_intr_mode_init()
x86_platform.apic_post_init()
hyperv_init()
hv_stimer_alloc()
apic_bsp_setup()
setup_local_APIC()
setup_local_APIC() temporarily disables LAPIC, initializes it and
re-eanble it. The direct-mode STIMER depends on LAPIC, and when it's
registered, it can be programmed immediately and the timer can fire
very soon:
hv_stimer_init
clockevents_config_and_register
clockevents_register_device
tick_check_new_device
tick_setup_device
tick_setup_periodic(), tick_setup_oneshot()
clockevents_program_event
When the timer fires in the hypervisor, if the LAPIC is in the
disabled state, new versions of Hyper-V ignore the event and don't inject
the timer interrupt into the VM, and hence the VM hangs when it boots.
Note: when the VM starts/reboots, the LAPIC is pre-enabled by the
firmware, so the window of LAPIC being temporarily disabled is pretty
small, and the issue can only happen once out of 100~200 reboots for
a 40-vCPU VM on one dev host, and on another host the issue doesn't
reproduce after 2000 reboots.
The issue is more noticeable for kdump/kexec, because the LAPIC is
disabled by the first kernel, and stays disabled until the kdump/kexec
kernel enables it. This is especially an issue to a Generation-2 VM
(for which Hyper-V doesn't emulate the PIT timer) when CONFIG_HZ=1000
(rather than CONFIG_HZ=250) is used.
Fix the issue by moving hv_stimer_alloc() to a later place where the
LAPIC timer is initialized.
Fixes: 4df4cb9e99f8 ("x86/hyperv: Initialize clockevents earlier in CPU onlining")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210116223136.13892-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Currently the kexec kernel can panic or hang due to 2 causes:
1) hv_cpu_die() is not called upon kexec, so the hypervisor corrupts the
old VP Assist Pages when the kexec kernel runs. The same issue is fixed
for hibernation in commit 421f090c819d ("x86/hyperv: Suspend/resume the
VP assist page for hibernation"). Now fix it for kexec.
2) hyperv_cleanup() is called too early. In the kexec path, the other CPUs
are stopped in hv_machine_shutdown() -> native_machine_shutdown(), so
between hv_kexec_handler() and native_machine_shutdown(), the other CPUs
can still try to access the hypercall page and cause panic. The workaround
"hv_hypercall_pg = NULL;" in hyperv_cleanup() is unreliabe. Move
hyperv_cleanup() to a better place.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20201222065541.24312-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
In the architecture independent version of hyperv-tlfs.h, commit c55a844f46f958b
removed the "X64" in the symbol names so they would make sense for both x86 and
ARM64. That commit added aliases with the "X64" in the x86 version of hyperv-tlfs.h
so that existing x86 code would continue to compile.
As a cleanup, update the x86 code to use the symbols without the "X64", then remove
the aliases. There's no functional change.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/1601130386-11111-1-git-send-email-jsalisbury@linux.microsoft.com
|
|
Fix the recently added new __vmalloc_node_range callers to pass the
correct values as the owner for display in /proc/vmallocinfo.
Fixes: 800e26b81311 ("x86/hyperv: allocate the hypercall page with only read and execute bits")
Fixes: 10d5e97c1bf8 ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Fixes: 7a0e27b2a0ce ("mm: remove vmalloc_exec")
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200627075649.2455097-1-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "fix a hyperv W^X violation and remove vmalloc_exec"
Dexuan reported a W^X violation due to the fact that the hyper hypercall
page due switching it to be allocated using vmalloc_exec.
The problem is that PAGE_KERNEL_EXEC as used by vmalloc_exec actually
sets writable permissions in the pte. This series fixes the issue by
switching to the low-level __vmalloc_node_range interface that allows
specifing more detailed permissions instead. It then also open codes
the other two callers and removes the somewhat confusing vmalloc_exec
interface.
Peter noted that the hyper hypercall page allocation also has another
long standing issue in that it shouldn't use the full vmalloc but just
the module space. This issue is so far theoretical as the allocation is
done early in the boot process. I plan to fix it with another bigger
series for 5.9.
This patch (of 3):
Avoid a W^X violation cause by the fact that PAGE_KERNEL_EXEC includes
the writable bit.
For this resurrect the removed PAGE_KERNEL_RX definition, but as
PAGE_KERNEL_ROX to match arm64 and powerpc.
Link: http://lkml.kernel.org/r/20200618064307.32739-2-hch@lst.de
Fixes: 78bb17f76edc ("x86/hyperv: use vmalloc_exec for the hypercall page")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert various hypervisor vectors to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.647997594@linutronix.de
|
|
The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com> [hyperv]
Acked-by: Gao Xiang <xiang@kernel.org> [erofs]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "decruft the vmalloc API", v2.
Peter noticed that with some dumb luck you can toast the kernel address
space with exported vmalloc symbols.
I used this as an opportunity to decruft the vmalloc.c API and make it
much more systematic. This also removes any chance to create vmalloc
mappings outside the designated areas or using executable permissions
from modules. Besides that it removes more than 300 lines of code.
This patch (of 29):
Use the designated helper for allocating executable kernel memory, and
remove the now unused PAGE_KERNEL_RX define.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lkml.kernel.org/r/20200414131348.444715-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200414131348.444715-2-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Errors during hibernation with reenlightenment notifications enabled were
reported:
[ 51.730435] PM: hibernation entry
[ 51.737435] PM: Syncing filesystems ...
...
[ 54.102216] Disabling non-boot CPUs ...
[ 54.106633] smpboot: CPU 1 is now offline
[ 54.110006] unchecked MSR access error: WRMSR to 0x40000106 (tried to
write 0x47c72780000100ee) at rIP: 0xffffffff90062f24
native_write_msr+0x4/0x20)
[ 54.110006] Call Trace:
[ 54.110006] hv_cpu_die+0xd9/0xf0
...
Normally, hv_cpu_die() just reassigns reenlightenment notifications to some
other CPU when the CPU receiving them goes offline. Upon hibernation, there
is no other CPU which is still online so cpumask_any_but(cpu_online_mask)
returns >= nr_cpu_ids and using it as hv_vp_index index is incorrect.
Disable the feature when cpumask_any_but() fails.
Also, as we now disable reenlightenment notifications upon hibernation we
need to restore them on resume. Check if hv_reenlightenment_cb was
previously set and restore from hv_resume().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200512160153.134467-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Unlike the other CPUs, CPU0 is never offlined during hibernation, so in the
resume path, the "new" kernel's VP assist page is not suspended (i.e. not
disabled), and later when we jump to the "old" kernel, the page is not
properly re-enabled for CPU0 with the allocated page from the old kernel.
So far, the VP assist page is used by hv_apic_eoi_write(), and is also
used in the case of nested virtualization (running KVM atop Hyper-V).
For hv_apic_eoi_write(), when the page is not properly re-enabled,
hvp->apic_assist is always 0, so the HV_X64_MSR_EOI MSR is always written.
This is not ideal with respect to performance, but Hyper-V can still
correctly handle this according to the Hyper-V spec; nevertheless, Linux
still must update the Hyper-V hypervisor with the correct VP assist page
to prevent Hyper-V from writing to the stale page, which causes guest
memory corruption and consequently may have caused the hangs and triple
faults seen during non-boot CPUs resume.
Fix the issue by calling hv_cpu_die()/hv_cpu_init() in the syscore ops.
Without the fix, hibernation can fail at a rate of 1/300 ~ 1/500.
With the fix, hibernation can pass a long-haul test of 2000 runs.
In the case of nested virtualization, disabling/reenabling the assist
page upon hibernation may be unsafe if there are active L2 guests.
It looks KVM should be enhanced to abort the hibernation request if
there is any active L2 guest.
Fixes: 05bd330a7fd8 ("x86/hyperv: Suspend/resume the hypercall page for hibernation")
Cc: stable@vger.kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1587437171-2472-1-git-send-email-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When oops happens with panic_on_oops unset, the oops
thread is killed by die() and system continues to run.
In such case, guest should not report crash register
data to host since system still runs. Check panic_on_oops
and return directly in hyperv_report_panic() when the function
is called in the die() and panic_on_oops is unset. Fix it.
Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-7-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
For hibernation the hypercall page must be disabled before the hibernation
image is created so that subsequent hypercall operations fail safely. On
resume the hypercall page has to be restored and reenabled to ensure proper
operation of the resumed kernel.
Implement the necessary suspend/resume callbacks.
[ tglx: Decrypted changelog ]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1578350559-130275-1-git-send-email-decui@microsoft.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- support for new VMBus protocols (Andrea Parri)
- hibernation support (Dexuan Cui)
- latency testing framework (Branden Bonaby)
- decoupling Hyper-V page size from guest page size (Himadri Pandya)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
drivers/hv: Replace binary semaphore with mutex
drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
HID: hyperv: Add the support of hibernation
hv_balloon: Add the support of hibernation
x86/hyperv: Implement hv_is_hibernation_supported()
Drivers: hv: balloon: Remove dependencies on guest page size
Drivers: hv: vmbus: Remove dependencies on guest page size
x86: hv: Add function to allocate zeroed page for Hyper-V
Drivers: hv: util: Specify ring buffer size using Hyper-V page size
Drivers: hv: Specify receive buffer size using Hyper-V page size
tools: hv: add vmbus testing tool
drivers: hv: vmbus: Introduce latency testing
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
hv_netvsc: Add the support of hibernation
hv_sock: Add the support of hibernation
video: hyperv_fb: Add the support of hibernation
scsi: storvsc: Add the support of hibernation
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
...
|
|
The API will be used by the hv_balloon and hv_vmbus drivers.
Balloon up/down and hot-add of memory must not be active if the user
wants the Linux VM to support hibernation, because they are incompatible
with hibernation according to Hyper-V team, e.g. upon suspend the
balloon VSP doesn't save any info about the ballooned-out pages (if any);
so, after Linux resumes, Linux balloon VSC expects that the VSP will
return the pages if Linux is under memory pressure, but the VSP will
never do that, since the VSP thinks it never stole the pages from the VM.
So, if the user wants Linux VM to support hibernation, Linux must forbid
balloon up/down and hot-add, and the only functionality of the balloon VSC
driver is reporting the VM's memory pressure to the host.
Ideally, when Linux detects that the user wants it to support hibernation,
the balloon VSC should tell the VSP that it does not support ballooning
and hot-add. However, the current version of the VSP requires the VSC
should support these capabilities, otherwise the capability negotiation
fails and the VSC can not load at all, so with the later changes to the
VSC driver, Linux VM still reports to the VSP that the VSC supports these
capabilities, but the VSC ignores the VSP's requests of balloon up/down
and hot add, and reports an error to the VSP, when applicable. BTW, in
the future the balloon VSP driver will allow the VSC to not support the
capabilities of balloon up/down and hot add.
The ACPI S4 state is not a must for hibernation to work, because Linux is
able to hibernate as long as the system can shut down. However in practice
we decide to artificially use the presence of the virtual ACPI S4 state as
an indicator of the user's intent of using hibernation, because Linux VM
must find a way to know if the user wants to use the hibernation feature
or not.
By default, Hyper-V does not enable the virtual ACPI S4 state; on recent
Hyper-V hosts (e.g. RS5, 19H1), the administrator is able to enable the
state for a VM by WMI commands.
Once all the vmbus and VSC patches for the hibernation feature are
accepted, an extra patch will be submitted to forbid hibernation if the
virtual ACPI S4 state is absent, i.e. hv_is_hibernation_supported() is
false.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Hyper-V assumes page size to be 4K. While this assumption holds true on
x86 architecture, it might not be true for ARM64 architecture. Hence
define hyper-v specific function to allocate a zeroed page which can
have a different implementation on ARM64 architecture to handle the
conflict between hyper-v's assumed page size and actual guest page size.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
