| Age | Commit message (Collapse) | Author |
|---|
|
The current method for signaling the compatibility of a Hyper-V host
with MSIs featuring 15-bit APIC IDs relies on a synthetic cpuid leaf.
However, for higher VTLs, this leaf is not reported, due to the absence
of an IO-APIC.
As an alternative, assume that when running at a high VTL, the host
supports 15-bit APIC IDs. This assumption is safe, as Hyper-V does not
employ any architectural MSIs at higher VTLs
This unblocks startup of VTL2 environments with more than 256 CPUs.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com>
|
|
In a CoCo VM, when transitioning memory from encrypted to decrypted, or
vice versa, the caller of set_memory_encrypted() or set_memory_decrypted()
is responsible for ensuring the memory isn't in use and isn't referenced
while the transition is in progress. The transition has multiple steps,
and the memory is in an inconsistent state until all steps are complete.
A reference while the state is inconsistent could result in an exception
that can't be cleanly fixed up.
However, the kernel load_unaligned_zeropad() mechanism could cause a stray
reference that can't be prevented by the caller of set_memory_encrypted()
or set_memory_decrypted(), so there's specific code to handle this case.
But a CoCo VM running on Hyper-V may be configured to run with a paravisor,
with the #VC or #VE exception routed to the paravisor. There's no
architectural way to forward the exceptions back to the guest kernel, and
in such a case, the load_unaligned_zeropad() specific code doesn't work.
To avoid this problem, mark pages as "not present" while a transition
is in progress. If load_unaligned_zeropad() causes a stray reference, a
normal page fault is generated instead of #VC or #VE, and the
page-fault-based fixup handlers for load_unaligned_zeropad() resolve the
reference. When the encrypted/decrypted transition is complete, mark the
pages as "present" again.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-4-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-4-mhklinux@outlook.com>
|
|
In preparation for temporarily marking pages not present during a
transition between encrypted and decrypted, use slow_virt_to_phys()
in the hypervisor callback. As long as the PFN is correct,
slow_virt_to_phys() works even if the leaf PTE is not present.
The existing functions that depend on vmalloc_to_page() all
require that the leaf PTE be marked present, so they don't work.
Update the comments for slow_virt_to_phys() to note this broader usage
and the requirement to work even if the PTE is not marked present.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-2-mhklinux@outlook.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
- Change global variables to local
- Add missing kernel-doc function parameter descriptions
- Remove unused parameter from a macro
- Remove obsolete Kconfig entry
- Fix comments
- Fix typos, mostly scripted, manually reviewed
and a micro-optimization got misplaced as a cleanup:
- Micro-optimize the asm code in secondary_startup_64_no_verify()
* tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arch/x86: Fix typos
x86/head_64: Use TESTB instead of TESTL in secondary_startup_64_no_verify()
x86/docs: Remove reference to syscall trampoline in PTI
x86/Kconfig: Remove obsolete config X86_32_SMP
x86/io: Remove the unused 'bw' parameter from the BUILDIO() macro
x86/mtrr: Document missing function parameters in kernel-doc
x86/setup: Make relocated_ramdisk a local variable of relocate_initrd()
|
|
Fix typos, most reported by "codespell arch/x86". Only touches comments,
no code changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240103004011.1758650-1-helgaas@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- One fix for the KVP daemon (Ani Sinha)
- Fix for the detection of E820_TYPE_PRAM in a Gen2 VM (Saurabh Sengar)
- Micro-optimization for hv_nmi_unknown() (Uros Bizjak)
* tag 'hyperv-fixes-signed-20231121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Use atomic_try_cmpxchg() to micro-optimize hv_nmi_unknown()
x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM
hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles
|
|
A Gen2 VM doesn't support legacy PCI/PCIe, so both raw_pci_ops and
raw_pci_ext_ops are NULL, and pci_subsys_init() -> pcibios_init()
doesn't call pcibios_resource_survey() -> e820__reserve_resources_late();
as a result, any emulated persistent memory of E820_TYPE_PRAM (12) via
the kernel parameter memmap=nn[KMG]!ss is not added into iomem_resource
and hence can't be detected by register_e820_pmem().
Fix this by directly calling e820__reserve_resources_late() in
hv_pci_init(), which is called from arch_initcall(pci_arch_init).
It's ok to move a Gen2 VM's e820__reserve_resources_late() from
subsys_initcall(pci_subsys_init) to arch_initcall(pci_arch_init) because
the code in-between doesn't depend on the E820 resources.
e820__reserve_resources_late() depends on e820__reserve_resources(),
which has been called earlier from setup_arch().
For a Gen-2 VM, the new hv_pci_init() also adds any memory of
E820_TYPE_PMEM (7) into iomem_resource, and acpi_nfit_register_region() ->
acpi_nfit_insert_resource() -> region_intersects() returns
REGION_INTERSECTS, so the memory of E820_TYPE_PMEM won't get added twice.
Changed the local variable "int gen2vm" to "bool gen2vm".
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1699691867-9827-1-git-send-email-ssengar@linux.microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The majority of this is a rework of the assembly and C wrappers that
are used to talk to the TDX module and VMM. This is a nice cleanup in
general but is also clearing the way for using this code when Linux is
the TDX VMM.
There are also some tidbits to make TDX guests play nicer with Hyper-V
and to take advantage the hardware TSC.
Summary:
- Refactor and clean up TDX hypercall/module call infrastructure
- Handle retrying/resuming page conversion hypercalls
- Make sure to use the (shockingly) reliable TSC in TDX guests"
[ TLA reminder: TDX is "Trust Domain Extensions", Intel's guest VM
confidentiality technology ]
* tag 'x86_tdx_for_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Mark TSC reliable
x86/tdx: Fix __noreturn build warning around __tdx_hypercall_failed()
x86/virt/tdx: Make TDX_MODULE_CALL handle SEAMCALL #UD and #GP
x86/virt/tdx: Wire up basic SEAMCALL functions
x86/tdx: Remove 'struct tdx_hypercall_args'
x86/tdx: Reimplement __tdx_hypercall() using TDX_MODULE_CALL asm
x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL
x86/tdx: Extend TDX_MODULE_CALL to support more TDCALL/SEAMCALL leafs
x86/tdx: Pass TDCALL/SEAMCALL input/output registers via a structure
x86/tdx: Rename __tdx_module_call() to __tdcall()
x86/tdx: Make macros of TDCALLs consistent with the spec
x86/tdx: Skip saving output regs when SEAMCALL fails with VMFailInvalid
x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro
x86/tdx: Retry partially-completed page conversion hypercalls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
|
|
The data type for APIC IDs was standardized to 'u32' in the
following recent commit:
db4a4086a223 ("x86/apic: Use u32 for wakeup_secondary_cpu[_64]()")
Which changed the function arguments type signature of the
apic->wakeup_secondary_cpu() APIC driver function.
Propagate this to hv_snp_boot_ap() as well, which also addresses a
'assignment from incompatible pointer type' build warning that triggers
under the -Werror=incompatible-pointer-types GCC warning.
Fixes: db4a4086a223 ("x86/apic: Use u32 for wakeup_secondary_cpu[_64]()")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230814085113.233274223@linutronix.de
|
|
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085113.233274223@linutronix.de
|
|
Add "#define pr_fmt()" in hv_init.c to use "Hyper-V:" as common
print prefix for all pr_*() statements in this file.
Remove the "Hyper-V:" already prefixed in couple of prints.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1695123361-8877-1-git-send-email-ssengar@linux.microsoft.com
|
|
There has been cases reported where HYPERV_VTL_MODE is enabled by mistake,
on a non Hyper-V platforms. This causes the hv_vtl_early_init function to
be called in an non Hyper-V/VTL platforms which results the memory
corruption.
Remove the early_initcall for hv_vtl_early_init and call it at the end of
hyperv_init to make sure it is never called in a non Hyper-V platform by
mistake.
Reported-by: Mathias Krause <minipli@grsecurity.net>
Closes: https://lore.kernel.org/lkml/40467722-f4ab-19a5-4989-308225b1f9f0@grsecurity.net/
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1695358720-27681-1-git-send-email-ssengar@linux.microsoft.com
|
|
When Linux runs in a non-default VTL (CONFIG_HYPERV_VTL_MODE=y),
get_vtl() must never fail as its return value is used in negotiations
with the host. In the more generic case, (CONFIG_HYPERV_VTL_MODE=n) the
VTL is always zero so there's no need to do the hypercall.
Make get_vtl() BUG() in case of failure and put the implementation under
"if IS_ENABLED(CONFIG_HYPERV_VTL_MODE)" to avoid the call altogether in
the most generic use case.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1695182675-13405-1-git-send-email-ssengar@linux.microsoft.com
|
|
Now 'struct tdx_hypercall_args' is basically 'struct tdx_module_args'
minus RCX. Although from __tdx_hypercall()'s perspective RCX isn't
used as shared register thus not part of input/output registers, it's
not worth to have a separate structure just due to one register.
Remove the 'struct tdx_hypercall_args' and use 'struct tdx_module_args'
instead in __tdx_hypercall() related code. This also saves the memory
copy between the two structures within __tdx_hypercall().
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/798dad5ce24e9d745cf0e16825b75ccc433ad065.1692096753.git.kai.huang%40intel.com
|
|
Now the 'struct tdx_hypercall_args' and 'struct tdx_module_args' are
almost the same, and the TDX_HYPERCALL and TDX_MODULE_CALL asm macro
share similar code pattern too. The __tdx_hypercall() and __tdcall()
should be unified to use the same assembly code.
As a preparation to unify them, simplify the TDX_HYPERCALL to make it
more like the TDX_MODULE_CALL.
The TDX_HYPERCALL takes the pointer of 'struct tdx_hypercall_args' as
function call argument, and does below extra things comparing to the
TDX_MODULE_CALL:
1) It sets RAX to 0 (TDG.VP.VMCALL leaf) internally;
2) It sets RCX to the (fixed) bitmap of shared registers internally;
3) It calls __tdx_hypercall_failed() internally (and panics) when the
TDCALL instruction itself fails;
4) After TDCALL, it moves R10 to RAX to return the return code of the
VMCALL leaf, regardless the '\ret' asm macro argument;
Firstly, change the TDX_HYPERCALL to take the same function call
arguments as the TDX_MODULE_CALL does: TDCALL leaf ID, and the pointer
to 'struct tdx_module_args'. Then 1) and 2) can be moved to the
caller:
- TDG.VP.VMCALL leaf ID can be passed via the function call argument;
- 'struct tdx_module_args' is 'struct tdx_hypercall_args' + RCX, thus
the bitmap of shared registers can be passed via RCX in the
structure.
Secondly, to move 3) and 4) out of assembly, make the TDX_HYPERCALL
always save output registers to the structure. The caller then can:
- Call __tdx_hypercall_failed() when TDX_HYPERCALL returns error;
- Return R10 in the structure as the return code of the VMCALL leaf;
With above changes, change the asm function from __tdx_hypercall() to
__tdcall_hypercall(), and reimplement __tdx_hypercall() as the C wrapper
of it. This avoids having to add another wrapper of __tdx_hypercall()
(_tdx_hypercall() is already taken).
The __tdcall_hypercall() will be replaced with a __tdcall() variant
using TDX_MODULE_CALL in a later commit as the final goal is to have one
assembly to handle both TDCALL and TDVMCALL.
Currently, the __tdx_hypercall() asm is in '.noinstr.text'. To keep
this unchanged, annotate __tdx_hypercall(), which is a C function now,
as 'noinstr'.
Remove the __tdx_hypercall_ret() as __tdx_hypercall() already does so.
Implement __tdx_hypercall() in tdx-shared.c so it can be shared with the
compressed code.
Opportunistically fix a checkpatch error complaining using space around
parenthesis '(' and ')' while moving the bitmap of shared registers to
<asm/shared/tdx.h>.
[ dhansen: quash new calls of __tdx_hypercall_ret() that showed up ]
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/0cbf25e7aee3256288045023a31f65f0cef90af4.1692096753.git.kai.huang%40intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for SEV-SNP guests on Hyper-V (Tianyu Lan)
- Support for TDX guests on Hyper-V (Dexuan Cui)
- Use SBRM API in Hyper-V balloon driver (Mitchell Levy)
- Avoid dereferencing ACPI root object handle in VMBus driver (Maciej
Szmigiero)
- A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh
Sengar)
* tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: Remove duplicate include
x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's
x86/hyperv: Remove hv_isolation_type_en_snp
x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor
Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor
x86/hyperv: Introduce a global variable hyperv_paravisor_present
Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM
x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests
Drivers: hv: vmbus: Support fully enlightened TDX guests
x86/hyperv: Support hypercalls for fully enlightened TDX guests
x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests
x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV
x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub
hv: hyperv.h: Replace one-element array with flexible-array member
Drivers: hv: vmbus: Don't dereference ACPI root object handle
x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES
x86/hyperv: Add smp support for SEV-SNP guest
clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest
x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest
drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
|
|
./arch/x86/hyperv/ivm.c: asm/sev.h is included more than once.
./arch/x86/hyperv/ivm.c: asm/coco.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6212
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080352.98945-1-jiapeng.chong@linux.alibaba.com
|
|
Group the code this way so that we can avoid too many ifdef's:
Data only used in an SNP VM with the paravisor;
Functions only used in an SNP VM with the paravisor;
Data only used in an SNP VM without the paravisor;
Functions only used in an SNP VM without the paravisor;
Functions only used in a TDX VM, with and without the paravisor;
Functions used in an SNP or TDX VM, when the paravisor is present;
Functions always used, even in a regular non-CoCo VM.
No functional change.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-11-decui@microsoft.com
|
|
In ms_hyperv_init_platform(), do not distinguish between a SNP VM with
the paravisor and a SNP VM without the paravisor.
Replace hv_isolation_type_en_snp() with
!ms_hyperv.paravisor_present && hv_isolation_type_snp().
The hv_isolation_type_en_snp() in drivers/hv/hv.c and
drivers/hv/hv_common.c can be changed to hv_isolation_type_snp() since
we know !ms_hyperv.paravisor_present is true there.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-10-decui@microsoft.com
|
|
When the paravisor is present, a SNP VM must use GHCB to access some
special MSRs, including HV_X64_MSR_GUEST_OS_ID and some SynIC MSRs.
Similarly, when the paravisor is present, a TDX VM must use TDX GHCI
to access the same MSRs.
Implement hv_tdx_msr_write() and hv_tdx_msr_read(), and use the helper
functions hv_ivm_msr_read() and hv_ivm_msr_write() to access the MSRs
in a unified way for SNP/TDX VMs with the paravisor.
Do not export hv_tdx_msr_write() and hv_tdx_msr_read(), because we never
really used hv_ghcb_msr_write() and hv_ghcb_msr_read() in any module.
Update arch/x86/include/asm/mshyperv.h so that the kernel can still build
if CONFIG_AMD_MEM_ENCRYPT or CONFIG_INTEL_TDX_GUEST is not set, or
neither is set.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-9-decui@microsoft.com
|
|
The post_msg_page was removed in
commit 9a6b1a170ca8 ("Drivers: hv: vmbus: Remove the per-CPU post_msg_page")
However, it turns out that we need to bring it back, but only for a TDX VM
with the paravisor: in such a VM, the hyperv_pcpu_input_arg is not decrypted,
but the HVCALL_POST_MESSAGE in such a VM needs a decrypted page as the
hypercall input page: see the comments in hyperv_init() for a detailed
explanation.
Except for HVCALL_POST_MESSAGE and HVCALL_SIGNAL_EVENT, the other hypercalls
in a TDX VM with the paravisor still use hv_hypercall_pg and must use the
hyperv_pcpu_input_arg (which is encrypted in such a VM), when a hypercall
input page is used.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-8-decui@microsoft.com
|
|
The new variable hyperv_paravisor_present is set only when the VM
is a SNP/TDX VM with the paravisor running: see ms_hyperv_init_platform().
We introduce hyperv_paravisor_present because we can not use
ms_hyperv.paravisor_present in arch/x86/include/asm/mshyperv.h:
struct ms_hyperv_info is defined in include/asm-generic/mshyperv.h, which
is included at the end of arch/x86/include/asm/mshyperv.h, but at the
beginning of arch/x86/include/asm/mshyperv.h, we would already need to use
struct ms_hyperv_info in hv_do_hypercall().
We use hyperv_paravisor_present only in include/asm-generic/mshyperv.h,
and use ms_hyperv.paravisor_present elsewhere. In the future, we'll
introduce a hypercall function structure for different VM types, and
at boot time, the right function pointers would be written into the
structure so that runtime testing of TDX vs. SNP vs. normal will be
avoided and hyperv_paravisor_present will no longer be needed.
Call hv_vtom_init() when it's a VBS VM or when ms_hyperv.paravisor_present
is true, i.e. the VM is a SNP VM or TDX VM with the paravisor.
Enhance hv_vtom_init() for a TDX VM with the paravisor.
In hv_common_cpu_init(), don't decrypt the hyperv_pcpu_input_arg
for a TDX VM with the paravisor, just like we don't decrypt the page
for a SNP VM with the paravisor.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-7-decui@microsoft.com
|
|
Add Hyper-V specific code so that a fully enlightened TDX guest (i.e.
without the paravisor) can run on Hyper-V:
Don't use hv_vp_assist_page. Use GHCI instead.
Don't try to use the unsupported HV_REGISTER_CRASH_CTL.
Don't trust (use) Hyper-V's TLB-flushing hypercalls.
Don't use lazy EOI.
Share the SynIC Event/Message pages with the hypervisor.
Don't use the Hyper-V TSC page for now, because non-trivial work is
required to share the page with the hypervisor.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-4-decui@microsoft.com
|
|
A fully enlightened TDX guest on Hyper-V (i.e. without the paravisor) only
uses the GHCI call rather than hv_hypercall_pg. Do not initialize
hypercall_pg for such a guest.
In hv_common_cpu_init(), the hyperv_pcpu_input_arg page needs to be
decrypted in such a guest.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-3-decui@microsoft.com
|
|
No logic change to SNP/VBS guests.
hv_isolation_type_tdx() will be used to instruct a TDX guest on Hyper-V to
do some TDX-specific operations, e.g. for a fully enlightened TDX guest
(i.e. without the paravisor), hv_do_hypercall() should use
__tdx_hypercall() and such a guest on Hyper-V should handle the Hyper-V
Event/Message/Monitor pages specially.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-2-decui@microsoft.com
|
|
In the AMD SEV-SNP guest, AP needs to be started up via sev es
save area and Hyper-V requires to call HVCALL_START_VP hypercall
to pass the gpa of sev es save area with AP's vp index and VTL(Virtual
trust level) parameters. Override wakeup_secondary_cpu_64 callback
with hv_snp_boot_ap.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-8-ltykernel@gmail.com
|
|
hv vp assist page needs to be shared between SEV-SNP guest and Hyper-V.
So mark the page unencrypted in the SEV-SNP guest.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-4-ltykernel@gmail.com
|
|
SEV-SNP guests on Hyper-V can run at multiple Virtual Trust
Levels (VTL). During boot, get the VTL at which we're running
using the GET_VP_REGISTERs hypercall, and save the value
for future use. Then during VMBus initialization, set the VTL
with the saved value as required in the VMBus init message.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-3-ltykernel@gmail.com
|
|
Introduce static key isolation_type_en_snp for enlightened
sev-snp guest check.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-2-ltykernel@gmail.com
|
|
Move them to one place so the static call conversion gets simpler.
No functional change.
[ dhansen: merge against recent x86/apic changes ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Convert all places which just assign a new function directly to the apic
callback to use apic_update_callback() which prepares for using static
calls.
Mark snp_set_wakeup_secondary_cpu() and kvm_setup_pv_ipi() __init, as they
are only invoked from init code and otherwise trigger a section mismatch as
they are now invoking a __init function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Switch them over to apic_update_callback() and remove the code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Yet another wrapper of a wrapper gone along with the outdated comment
that this compiles to a single instruction.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Every callsite hands in the same constants which is a pointless exercise
and cannot be optimized by the compiler due to the indirect calls.
Use the constants in the eoi() callbacks and remove the arguments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix a bug in a python script for Hyper-V (Ani Sinha)
- Workaround a bug in Hyper-V when IBT is enabled (Michael Kelley)
- Fix an issue parsing MP table when Linux runs in VTL2 (Saurabh
Sengar)
- Several cleanup patches (Nischala Yelchuri, Kameron Carr, YueHaibing,
ZhiHu)
* tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer()
x86/hyperv: add noop functions to x86_init mpparse functions
vmbus_testing: fix wrong python syntax for integer value comparison
x86/hyperv: fix a warning in mshyperv.h
x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg
Drivers: hv: Change hv_free_hyperv_page() to take void * argument
|
|
Hyper-V can run VMs at different privilege "levels" known as Virtual
Trust Levels (VTL). Sometimes, it chooses to run two different VMs
at different levels but they share some of their address space. In
such setups VTL2 (higher level VM) has visibility of all of the
VTL0 (level 0) memory space.
When the CONFIG_X86_MPPARSE is enabled for VTL2, the VTL2 kernel
performs a search within the low memory to locate MP tables. However,
in systems where VTL0 manages the low memory and may contain valid
tables, this scanning can result in incorrect MP table information
being provided to the VTL2 kernel, mistakenly considering VTL0's MP
table as its own
Add noop functions to avoid MP parse scan by VTL2.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/1687537688-5397-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs
with ConfigVersion 9.3 or later support IBT in the guest. However,
current versions of Hyper-V have a bug in that there's not an ENDBR64
instruction at the beginning of the hypercall page. Since hypercalls are
made with an indirect call to the hypercall page, all hypercall attempts
fail with an exception and Linux panics.
A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux
panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start
with ENDBR. The VM will boot and run without IBT.
If future Linux 32-bit kernels were to support IBT, additional hypercall
page hackery would be needed to make IBT work for such kernels in a
Hyper-V VM.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1690001476-98594-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Several places in code for Hyper-V reference the
per-CPU variable hyperv_pcpu_input_arg. Older code uses a multi-line
sequence to reference the variable, and usually includes a cast.
Newer code does a much simpler direct assignment. The latter is
preferable as the complexity of the older code is unnecessary.
Update older code to use the simpler direct assignment.
Signed-off-by: Nischala Yelchuri <niyelchu@linux.microsoft.com>
Link: https://lore.kernel.org/r/1687286438-9421-1-git-send-email-niyelchu@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Some SEV and CC platform helpers cleanup and simplifications now that
the usage patterns are becoming apparent
[ I'm sure I'm the only one that has gets confused by all the TLAs, but
in case there are others: here SEV is AMD's "Secure Encrypted
Virtualization" and CC is generic "Confidential Computing".
There's also Intel SGX (Software Guard Extensions) and TDX (Trust
Domain Extensions), along with all the vendor memory encryption
extensions (SME, TSME, TME, and WTF).
And then we have arm64 with RMA and CCA, and I probably forgot another
dozen or so related acronyms - Linus ]
* tag 'x86_sev_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/coco: Get rid of accessor functions
x86/sev: Get rid of special sev_es_enable_key
x86/coco: Mark cc_platform_has() and descendants noinstr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mtrr updates from Borislav Petkov:
"A serious scrubbing of the MTRR code including adding a new map
mechanism in order to look up the memory type of a region easily.
Also address memory range lookup issues like returning an invalid
memory type. Furthermore, this handles the decoupling of PAT from MTRR
more naturally.
All work by Juergen Gross"
* tag 'x86_mtrr_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Set default memory type for PV guests to WB
x86/mtrr: Unify debugging printing
x86/mtrr: Remove unused code
x86/mm: Only check uniform after calling mtrr_type_lookup()
x86/mtrr: Don't let mtrr_type_lookup() return MTRR_TYPE_INVALID
x86/mtrr: Use new cache_map in mtrr_type_lookup()
x86/mtrr: Add mtrr=debug command line option
x86/mtrr: Construct a memory map with cache modes
x86/mtrr: Add get_effective_type() service function
x86/mtrr: Allocate mtrr_value array dynamically
x86/mtrr: Move 32-bit code from mtrr.c to legacy.c
x86/mtrr: Have only one set_mtrr() variant
x86/mtrr: Replace vendor tests in MTRR code
x86/xen: Set MTRR state when running as Xen PV initial domain
x86/hyperv: Set MTRR state when running as SEV-SNP Hyper-V guest
x86/mtrr: Support setting MTRR state for software defined MTRRs
x86/mtrr: Replace size_or_mask and size_and_mask with a much easier concept
x86/mtrr: Remove physical address size calculation
|
|
These commits
a494aef23dfc ("PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg")
2c6ba4216844 ("PCI: hv: Enable PCI pass-thru devices in Confidential VMs")
update the Hyper-V virtual PCI driver to use the hyperv_pcpu_input_arg
because that memory will be correctly marked as decrypted or encrypted
for all VM types (CoCo or normal). But problems ensue when CPUs in the
VM go online or offline after virtual PCI devices have been configured.
When a CPU is brought online, the hyperv_pcpu_input_arg for that CPU is
initialized by hv_cpu_init() running under state CPUHP_AP_ONLINE_DYN.
But this state occurs after state CPUHP_AP_IRQ_AFFINITY_ONLINE, which
may call the virtual PCI driver and fault trying to use the as yet
uninitialized hyperv_pcpu_input_arg. A similar problem occurs in a CoCo
VM if the MMIO read and write hypercalls are used from state
CPUHP_AP_IRQ_AFFINITY_ONLINE.
When a CPU is taken offline, IRQs may be reassigned in state
CPUHP_TEARDOWN_CPU. Again, the virtual PCI driver may fault trying to
use the hyperv_pcpu_input_arg that has already been freed by a
higher state.
Fix the onlining problem by adding state CPUHP_AP_HYPERV_ONLINE
immediately after CPUHP_AP_ONLINE_IDLE (similar to CPUHP_AP_KVM_ONLINE)
and before CPUHP_AP_IRQ_AFFINITY_ONLINE. Use this new state for
Hyper-V initialization so that hyperv_pcpu_input_arg is allocated
early enough.
Fix the offlining problem by not freeing hyperv_pcpu_input_arg when
a CPU goes offline. Retain the allocated memory, and reuse it if
the CPU comes back online later.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1684862062-51576-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
In order to avoid mappings using the UC- cache attribute, set the
MTRR state to use WB caching as the default.
This is needed in order to cope with the fact that PAT is enabled,
while MTRRs are not supported by the hypervisor.
Fixes: 90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-5-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
cc_vendor is __ro_after_init and thus can be used directly.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230508121957.32341-1-bp@alien8.de
|
|
Assign the realmode pointers to noop, instead of NULL to fix kernel panic.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1682331016-22561-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
|
Virtual Trust Levels (VTL) helps enable Hyper-V Virtual Secure Mode (VSM)
feature. VSM is a set of hypervisor capabilities and enlightenments
offered to host and guest partitions which enable the creation and
management of new security boundaries within operating system software.
VSM achieves and maintains isolation through VTLs.
Add early initialization for Virtual Trust Levels (VTL). This includes
initializing the x86 platform for VTL and enabling boot support for
secondary CPUs to start in targeted VTL context. For now, only enable
the code for targeted VTL level as 2.
When starting an AP at a VTL other than VTL0, the AP must start directly
in 64-bit mode, bypassing the usual 16-bit -> 32-bit -> 64-bit mode
transition sequence that occurs after waking up an AP with SIPI whose
vector points to the 16-bit AP startup trampoline code.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Link: https://lore.kernel.org/r/1681192532-15460-6-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
In the case where page tables are not freed, native_flush_tlb_multi()
does not do a remote TLB flush on CPUs in lazy TLB mode because the
CPU will flush itself at the next context switch. By comparison, the
Hyper-V enlightened TLB flush does not exclude CPUs in lazy TLB mode
and so performs unnecessary flushes.
If we're not freeing page tables, add logic to test for lazy TLB
mode when adding CPUs to the input argument to the Hyper-V TLB
flush hypercall. Exclude lazy TLB mode CPUs so the behavior
matches native_flush_tlb_multi() and the unnecessary flushes are
avoided. Handle both the <=64 vCPU case and the _ex case for >64
vCPUs.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679922967-26582-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When copying CPUs from a Linux cpumask to a Hyper-V VPset,
cpumask_to_vpset() currently has a "_noself" variant that doesn't copy
the current CPU to the VPset. Generalize this variant by replacing it
with a "_skip" variant having a callback function that is invoked for
each CPU to decide if that CPU should be copied. Update the one caller
of cpumask_to_vpset_noself() to use the new "_skip" variant instead.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679922967-26582-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
