summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/microcode.h
AgeCommit message (Collapse)Author
2023-10-24x86/microcode/intel: Add a minimum required revision for late loadingAshok Raj
In general users, don't have the necessary information to determine whether late loading of a new microcode version is safe and does not modify anything which the currently running kernel uses already, e.g. removal of CPUID bits or behavioural changes of MSRs. To address this issue, Intel has added a "minimum required version" field to a previously reserved field in the microcode header. Microcode updates should only be applied if the current microcode version is equal to, or greater than this minimum required version. Thomas made some suggestions on how meta-data in the microcode file could provide Linux with information to decide if the new microcode is suitable candidate for late loading. But even the "simpler" option requires a lot of metadata and corresponding kernel code to parse it, so the final suggestion was to add the 'minimum required version' field in the header. When microcode changes visible features, microcode will set the minimum required version to its own revision which prevents late loading. Old microcode blobs have the minimum revision field always set to 0, which indicates that there is no information and the kernel considers it unsafe. This is a pure OS software mechanism. The hardware/firmware ignores this header field. For early loading there is no restriction because OS visible features are enumerated after the early load and therefore a change has no effect. The check is always enabled, but by default not enforced. It can be enforced via Kconfig or kernel command line. If enforced, the kernel refuses to late load microcode with a minimum required version field which is zero or when the currently loaded microcode revision is smaller than the minimum required revision. If not enforced the load happens independent of the revision check to stay compatible with the existing behaviour, but it influences the decision whether the kernel is tainted or not. If the check signals that the late load is safe, then the kernel is not tainted. Early loading is not affected by this. [ tglx: Massaged changelog and fixed up the implementation ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231002115903.776467264@linutronix.de
2023-10-24x86/microcode: Handle "offline" CPUs correctlyThomas Gleixner
Offline CPUs need to be parked in a safe loop when microcode update is in progress on the primary CPU. Currently, offline CPUs are parked in mwait_play_dead(), and for Intel CPUs, its not a safe instruction, because the MWAIT instruction can be patched in the new microcode update that can cause instability. - Add a new microcode state 'UCODE_OFFLINE' to report status on per-CPU basis. - Force NMI on the offline CPUs. Wake up offline CPUs while the update is in progress and then return them back to mwait_play_dead() after microcode update is complete. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231002115903.660850472@linutronix.de
2023-10-24x86/microcode: Rendezvous and load in NMIThomas Gleixner
stop_machine() does not prevent the spin-waiting sibling from handling an NMI, which is obviously violating the whole concept of rendezvous. Implement a static branch right in the beginning of the NMI handler which is nopped out except when enabled by the late loading mechanism. The late loader enables the static branch before stop_machine() is invoked. Each CPU has an nmi_enable in its control structure which indicates whether the CPU should go into the update routine. This is required to bridge the gap between enabling the branch and actually being at the point where it is required to enter the loader wait loop. Each CPU which arrives in the stopper thread function sets that flag and issues a self NMI right after that. If the NMI function sees the flag clear, it returns. If it's set it clears the flag and enters the rendezvous. This is safe against a real NMI which hits in between setting the flag and sending the NMI to itself. The real NMI will be swallowed by the microcode update and the self NMI will then let stuff continue. Otherwise this would end up with a spurious NMI. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231002115903.489900814@linutronix.de
2023-10-18x86/microcode/32: Move early loading after paging enableThomas Gleixner
32-bit loads microcode before paging is enabled. The commit which introduced that has zero justification in the changelog. The cover letter has slightly more content, but it does not give any technical justification either: "The problem in current microcode loading method is that we load a microcode way, way too late; ideally we should load it before turning paging on. This may only be practical on 32 bits since we can't get to 64-bit mode without paging on, but we should still do it as early as at all possible." Handwaving word salad with zero technical content. Someone claimed in an offlist conversation that this is required for curing the ATOM erratum AAE44/AAF40/AAG38/AAH41. That erratum requires an microcode update in order to make the usage of PSE safe. But during early boot, PSE is completely irrelevant and it is evaluated way later. Neither is it relevant for the AP on single core HT enabled CPUs as the microcode loading on the AP is not doing anything. On dual core CPUs there is a theoretical problem if a split of an executable large page between enabling paging including PSE and loading the microcode happens. But that's only theoretical, it's practically irrelevant because the affected dual core CPUs are 64bit enabled and therefore have paging and PSE enabled before loading the microcode on the second core. So why would it work on 64-bit but not on 32-bit? The erratum: "AAG38 Code Fetch May Occur to Incorrect Address After a Large Page is Split Into 4-Kbyte Pages Problem: If software clears the PS (page size) bit in a present PDE (page directory entry), that will cause linear addresses mapped through this PDE to use 4-KByte pages instead of using a large page after old TLB entries are invalidated. Due to this erratum, if a code fetch uses this PDE before the TLB entry for the large page is invalidated then it may fetch from a different physical address than specified by either the old large page translation or the new 4-KByte page translation. This erratum may also cause speculative code fetches from incorrect addresses." The practical relevance for this is exactly zero because there is no splitting of large text pages during early boot-time, i.e. between paging enable and microcode loading, and neither during CPU hotplug. IOW, this load microcode before paging enable is yet another voodoo programming solution in search of a problem. What's worse is that it causes at least two serious problems: 1) When stackprotector is enabled, the microcode loader code has the stackprotector mechanics enabled. The read from the per CPU variable __stack_chk_guard is always accessing the virtual address either directly on UP or via %fs on SMP. In physical address mode this results in an access to memory above 3GB. So this works by chance as the hardware returns the same value when there is no RAM at this physical address. When there is RAM populated above 3G then the read is by chance the same as nothing changes that memory during the very early boot stage. That's not necessarily true during runtime CPU hotplug. 2) When function tracing is enabled, the relevant microcode loader functions and the functions invoked from there will call into the tracing code and evaluate global and per CPU variables in physical address mode. What could potentially go wrong? Cure this and move the microcode loading after the early paging enable, use the new temporary initrd mapping and remove the gunk in the microcode loader which is required to handle physical address mode. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231017211722.348298216@linutronix.de
2023-10-18x86/boot/32: Temporarily map initrd for microcode loadingThomas Gleixner
Early microcode loading on 32-bit runs in physical address mode because the initrd is not covered by the initial page tables. That results in a horrible mess all over the microcode loader code. Provide a temporary mapping for the initrd in the initial page tables by appending it to the actual initial mapping starting with a new PGD or PMD depending on the configured page table levels ([non-]PAE). The page table entries are located after _brk_end so they are not permanently using memory space. The mapping is invalidated right away in i386_start_kernel() after the early microcode loader has run. This prepares for removing the physical address mode oddities from all over the microcode loader code, which in turn allows further cleanups. Provide the map and unmap code and document the place where the microcode loader needs to be invoked with a comment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231017211722.292291436@linutronix.de
2023-08-28Merge tag 'x86-cleanups-2023-08-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 cleanups from Ingo Molnar: "The following commit deserves special mention: 22dc02f81cddd Revert "sched/fair: Move unused stub functions to header" This is in x86/cleanups, because the revert is a re-application of a number of cleanups that got removed inadvertedly" [ This also effectively undoes the amd_check_microcode() microcode declaration change I had done in my microcode loader merge in commit 42a7f6e3ffe0 ("Merge tag 'x86_microcode_for_v6.6_rc1' [...]"). I picked the declaration change by Arnd from this branch instead, which put it in <asm/processor.h> instead of <asm/microcode.h> like I had done in my merge resolution - Linus ] * tag 'x86-cleanups-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Refactor code using deprecated strncpy() interface to use strscpy() x86/hpet: Refactor code using deprecated strncpy() interface to use strscpy() x86/platform/uv: Refactor code using deprecated strcpy()/strncpy() interfaces to use strscpy() x86/qspinlock-paravirt: Fix missing-prototype warning x86/paravirt: Silence unused native_pv_lock_init() function warning x86/alternative: Add a __alt_reloc_selftest() prototype x86/purgatory: Include header for warn() declaration x86/asm: Avoid unneeded __div64_32 function definition Revert "sched/fair: Move unused stub functions to header" x86/apic: Hide unused safe_smp_processor_id() on 32-bit UP x86/cpu: Fix amd_check_microcode() declaration
2023-08-28Merge tag 'x86_microcode_for_v6.6_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loading updates from Borislav Petkov: "The first, cleanup part of the microcode loader reorg tglx has been working on. The other part wasn't fully ready in time so it will follow on later. This part makes the loader core code as it is practically enabled on pretty much every baremetal machine so there's no need to have the Kconfig items. In addition, there are cleanups which prepare for future feature enablement" * tag 'x86_microcode_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Remove remaining references to CONFIG_MICROCODE_AMD x86/microcode/intel: Remove pointless mutex x86/microcode/intel: Remove debug code x86/microcode: Move core specific defines to local header x86/microcode/intel: Rename get_datasize() since its used externally x86/microcode: Make reload_early_microcode() static x86/microcode: Include vendor headers into microcode.h x86/microcode/intel: Move microcode functions out of cpu/intel.c x86/microcode: Hide the config knob x86/mm: Remove unused microcode.h include x86/microcode: Remove microcode_mutex x86/microcode/AMD: Rip out static buffers
2023-08-13x86/microcode: Move core specific defines to local headerThomas Gleixner
There is no reason to expose all of this globally. Move everything which is not required outside of the microcode specific code to local header files and into the respective source files. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230812195727.952876381@linutronix.de
2023-08-13x86/microcode: Make reload_early_microcode() staticThomas Gleixner
fe055896c040 ("x86/microcode: Merge the early microcode loader") left this needlessly public. Git archaeology provided by Borislav. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230812195727.834943153@linutronix.de
2023-08-13x86/microcode: Include vendor headers into microcode.hAshok Raj
Currently vendor specific headers are included explicitly when used in common code. Instead, include the vendor specific headers in microcode.h, and include that in all usages. No functional change. Suggested-by: Boris Petkov <bp@alien8.de> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230812195727.776541545@linutronix.de
2023-08-13x86/microcode: Hide the config knobThomas Gleixner
In reality CONFIG_MICROCODE is enabled in any reasonable configuration when Intel or AMD support is enabled. Accommodate to reality. Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230812195727.660453052@linutronix.de
2023-07-17x86/cpu/amd: Add a Zenbleed fixBorislav Petkov (AMD)
Add a fix for the Zen2 VZEROUPPER data corruption bug where under certain circumstances executing VZEROUPPER can cause register corruption or leak data. The optimal fix is through microcode but in the case the proper microcode revision has not been applied, enable a fallback fix using a chicken bit. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
2023-02-06x86/microcode/AMD: Add a @cpu parameter to the reloading functionsBorislav Petkov (AMD)
Will be used in a subsequent change. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230130161709.11615-3-bp@alien8.de
2022-11-02x86/microcode: Drop struct ucode_cpu_info.validBorislav Petkov
It is not needed anymore. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/20221028142638.28498-6-bp@alien8.de
2022-11-02x86/microcode: Kill refresh_fwBorislav Petkov
request_microcode_fw() can always request firmware now so drop this superfluous argument. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/20221028142638.28498-4-bp@alien8.de
2022-09-23x86/microcode/AMD: Track patch allocation size explicitlyKees Cook
In preparation for reducing the use of ksize(), record the actual allocation size for later memcpy(). This avoids copying extra (uninitialized!) bytes into the patch buffer when the requested allocation size isn't exactly the size of a kmalloc bucket. Additionally, fix potential future issues where runtime bounds checking will notice that the buffer was allocated to a smaller value than returned by ksize(). Fixes: 757885e94a22 ("x86, microcode, amd: Early microcode patch loading support for AMD") Suggested-by: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/lkml/CA+DvKQ+bp7Y7gmaVhacjv9uF6Ar-o4tet872h4Q8RPYPJjcJQA@mail.gmail.com/
2022-08-26x86/microcode: Remove ->request_microcode_user()Borislav Petkov
181b6f40e9ea ("x86/microcode: Rip out the OLD_INTERFACE") removed the old microcode loading interface but forgot to remove the related ->request_microcode_user() functionality which it uses. Rip it out now too. Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220825075445.28171-1-bp@alien8.de
2022-04-19x86/cpu: Load microcode during restore_processor_state()Borislav Petkov
When resuming from system sleep state, restore_processor_state() restores the boot CPU MSRs. These MSRs could be emulated by microcode. If microcode is not loaded yet, writing to emulated MSRs leads to unchecked MSR access error: ... PM: Calling lapic_suspend+0x0/0x210 unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr) Call Trace: <TASK> ? restore_processor_state x86_acpi_suspend_lowlevel acpi_suspend_enter suspend_devices_and_enter pm_suspend.cold state_store kobj_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write __x64_sys_write do_syscall_64 entry_SYSCALL_64_after_hwframe RIP: 0033:0x7fda13c260a7 To ensure microcode emulated MSRs are available for restoration, load the microcode on the boot CPU before restoring these MSRs. [ Pawan: write commit message and productize it. ] Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume") Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841 Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
2021-10-22x86/microcode: Use the firmware_loader built-in APIBorislav Petkov
The microcode loader has been looping through __start_builtin_fw down to __end_builtin_fw to look for possibly built-in firmware for microcode updates. Now that the firmware loader code has exported an API for looping through the kernel's built-in firmware section, use it and drop the x86 implementation in favor. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211021155843.1969401-4-mcgrof@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-31x86/microcode: Make microcode_init() staticBorislav Petkov
No functional changes. Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201230122147.26938-1-bp@alien8.de
2018-04-02Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups and msr updates from Ingo Molnar: "The main change is a performance/latency improvement to /dev/msr access. The rest are misc cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msr: Make rdmsrl_safe_on_cpu() scheduling safe as well x86/cpuid: Allow cpuid_read() to schedule x86/msr: Allow rdmsr_safe_on_cpu() to schedule x86/rtc: Stop using deprecated functions x86/dumpstack: Unify show_regs() x86/fault: Do not print IP in show_fault_oops() x86/MSR: Move native_* variants to msr.h
2018-03-16x86/microcode: Attempt late loading only when new microcode is presentBorislav Petkov
Return UCODE_NEW from the scanning functions to denote that new microcode was found and only then attempt the expensive synchronization dance. Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20180314183615.17629-1-bp@alien8.de
2018-03-08x86/MSR: Move native_* variants to msr.hBorislav Petkov
... where they belong. No functional change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/20180301151336.12948-1-bp@alien8.de
2018-02-17x86/microcode: Propagate return value from updating functionsBorislav Petkov
... so that callers can know when microcode was updated and act accordingly. Tested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180216112640.11554-2-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31Merge branch 'x86/urgent' into x86/microcode, to resolve conflictsIngo Molnar
Conflicts: arch/x86/kernel/cpu/microcode/amd.c arch/x86/kernel/cpu/microcode/core.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-30x86/microcode: Do not access the initrd after it has been freedBorislav Petkov
When we look for microcode blobs, we first try builtin and if that doesn't succeed, we fallback to the initrd supplied to the kernel. However, at some point doing boot, that initrd gets jettisoned and we shouldn't access it anymore. But we do, as the below KASAN report shows. That's because find_microcode_in_initrd() doesn't check whether the initrd is still valid or not. So do that. ================================================================== BUG: KASAN: use-after-free in find_cpio_data Read of size 1 by task swapper/1/0 page:ffffea0000db9d40 count:0 mapcount:0 mapping: (null) index:0x1 flags: 0x100000000000000() raw: 0100000000000000 0000000000000000 0000000000000001 00000000ffffffff raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.10.0-rc5-debug-00075-g2dbde22 #3 Hardware name: Dell Inc. XPS 13 9360/0839Y6, BIOS 1.2.3 12/01/2016 Call Trace: dump_stack ? _atomic_dec_and_lock ? __dump_page kasan_report_error ? pointer ? find_cpio_data __asan_report_load1_noabort ? find_cpio_data find_cpio_data ? vsprintf ? dump_stack ? get_ucode_user ? print_usage_bug find_microcode_in_initrd __load_ucode_intel ? collect_cpu_info_early ? debug_check_no_locks_freed load_ucode_intel_ap ? collect_cpu_info ? trace_hardirqs_on ? flat_send_IPI_mask_allbutself load_ucode_ap ? get_builtin_firmware ? flush_tlb_func ? do_raw_spin_trylock ? cpumask_weight cpu_init ? trace_hardirqs_off ? play_dead_common ? native_play_dead ? hlt_play_dead ? syscall_init ? arch_cpu_idle_dead ? do_idle start_secondary start_cpu Memory state around the buggy address: ffff880036e74f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e74f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff880036e75000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880036e75080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e75100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Tested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170126165833.evjemhbqzaepirxo@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-23x86/microcode: Convert to bare minimum MSR accessorsBorislav Petkov
Having tracepoints to the MSR accessors makes them unsuitable for early microcode loading: think 32-bit before paging is enabled and us chasing pointers to test whether a tracepoint is enabled or not. Results in a reliable triple fault. Convert to the bare ones. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170120202955.4091-4-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-25x86/microcode: Rework microcode loadingBorislav Petkov
Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25x86/microcode: Export the microcode cache linked listBorislav Petkov
It will be used by both drivers so move it to core.c. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-6-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25x86/microcode: Remove one #ifdef clauseBorislav Petkov
Move the function declaration to the other #ifdef CONFIG_MICROCODE together with the other functions. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-5-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08x86/microcode: Fix suspend to RAM with builtin microcodeBorislav Petkov
Usually, after we have found the proper microcode blob for the current machine, we stash it away for later use with save_microcode_in_initrd(). However, with builtin microcode which doesn't come from the initrd, we don't call that function because CONFIG_BLK_DEV_INITRD=n and even if set, we don't have a valid initrd. In order to fix this, let's make save_microcode_in_initrd() an fs_initcall which runs before rootfs_initcall() as this was the time it was called previously through: rootfs_initcall(populate_rootfs) |-> free_initrd() |-> free_initrd_mem() |-> save_microcode_in_initrd() Also, we make it run independently from initrd functionality being present or not. And since it is called in the microcode loader only now, we can also make it static. Reported-and-tested-by: Jim Bos <jim876@xs4all.nl> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # v4.6 Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1465225850-7352-3-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08x86/microcode: Fix loading precedenceBorislav Petkov
So it can happen that even with builtin microcode, CONFIG_BLK_DEV_INITRD=y gets forgotten enabled. Or, even with that disabled, an initrd image gets supplied by the boot loader, by omission or is simply forgotten there. And since we do look at boot_params.hdr.ramdisk_* to know whether we have received an initrd, we might get puzzled. So let's just make the loader look for builtin microcode first and if found, ignore the ramdisk image. If no builtin found, it falls back to scanning the supplied initrd, of course. For that, we move all the initrd scanning in a separate __scan_microcode_initrd() function and fall back to it only if load_builtin_intel_microcode() has failed. Reported-and-tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1465225850-7352-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-09x86/microcode: Untangle from BLK_DEV_INITRDBorislav Petkov
Thomas Voegtle reported that doing oldconfig with a .config which has CONFIG_MICROCODE enabled but BLK_DEV_INITRD disabled prevents the microcode loading mechanism from being built. So untangle it from the BLK_DEV_INITRD dependency so that oldconfig doesn't turn it off and add an explanatory text to its Kconfig help what the supported methods for supplying microcode are. Reported-by: Thomas Voegtle <tv@lio96.de> Tested-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.4 Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1454499225-21544-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-24x86/cpu: Unify CPU family, model, stepping calculationBorislav Petkov
Add generic functions which calc family, model and stepping from the CPUID_1.EAX leaf and stick them into the library we have. Rename those which do call CPUID with the prefix "x86_cpuid" as suggested by Paolo Bonzini. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1448273546-2567-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-21x86/microcode: Remove modularization leftoversBorislav Petkov
Remove the remaining module functionality leftovers. Make "dis_ucode_ldr" an early_param and make it static again. Drop module aliases, autoloading table, description, etc. Bump version number, while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1445334889-300-4-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-21x86/microcode: Merge the early microcode loaderBorislav Petkov
Merge the early loader functionality into the driver proper. The diff is huge but logically, it is simply moving code from the _early.c files into the main driver. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1445334889-300-3-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-21x86/microcode: Unmodularize the microcode driverBorislav Petkov
Make CONFIG_MICROCODE a bool. It was practically a bool already anyway, since early loader was forcing it to =y. Regardless, there's no real reason to have something be a module which gets built-in on the majority of installations out there. And its not like there's noticeable change in functionality - we still can load late microcode - just the module glue disappears. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1445334889-300-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06x86/microcode: Parse built-in microcode earlyBorislav Petkov
Apparently, people do build microcode into the kernel image, i.e. CONFIG_FIRMWARE_IN_KERNEL=y. Make that work in the early loader which is where microcode should be preferably loaded anyway. Note that you need to specify the microcode filename with the path relative to the toplevel firmware directory (the same like the late loading method) in CONFIG_EXTRA_FIRMWARE=y so that early loader can find it. I.e., something like this (Intel variant): CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09" CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware/" While at it, add me to the loader copyright boilerplate. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Daniel J Blueman <daniel@numascale.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-02x86/microcode: Consolidate family,model, ... codeBorislav Petkov
... to the header. Split the family acquiring function into a main one, doing CPUID and a helper which computes the extended family and is used in multiple places. Get rid of the locally-grown get_x86_{family,model}(). While at it, rename local variables to something more descriptive and vertically align assignments for better readability. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-12-06x86, microcode: Reload microcode on resumeBorislav Petkov
Normally, we do reapply microcode on resume. However, in the cases where that microcode comes from the early loader and the late loader hasn't been utilized yet, there's no easy way for us to go and apply the patch applied during boot by the early loader. Thus, reuse the patch stashed by the early loader for the BSP. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-05-20x86, microcode: Add a disable chicken bitBorislav Petkov
Add a cmdline param which disables the microcode loader. This is useful mostly in debugging situations where we want to turn off microcode loading, both early from the initrd and late, as a means to be able to rule out its influence on the machine. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1400525957-11525-3-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-01-13x86, microcode: Share native MSR accessing variantsBorislav Petkov
We want to use those in AMD's early loading path too. Also, add a native_wrmsrl variant. Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
2013-07-14x86: delete __cpuinit usage from all x86 filesPaul Gortmaker
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19x86: Fix section mismatch on load_ucode_apPaul Gortmaker
We are in the process of removing all the __cpuinit annotations. While working on making that change, an existing problem was made evident: WARNING: arch/x86/kernel/built-in.o(.text+0x198f2): Section mismatch in reference from the function cpu_init() to the function .init.text:load_ucode_ap() The function cpu_init() references the function __init load_ucode_ap(). This is often because cpu_init lacks a __init annotation or the annotation of load_ucode_ap is wrong. This now appears because in my working tree, cpu_init() is no longer tagged as __cpuinit, and so the audit picks up the mismatch. The 2nd hypothesis from the audit is the correct one, as there was an incorrect __init tag on the prototype in the header (but __cpuinit was used on the function itself.) The audit is telling us that the prototype's __init annotation took effect and the function did land in the .init.text section. Checking with objdump on a mainline tree that still has __cpuinit shows that the __cpuinit on the function takes precedence over the __init on the prototype, but that won't be true once we make __cpuinit a no-op. Even though we are removing __cpuinit, we temporarily align both the function and the prototype on __cpuinit so that the changeset can be applied to stable trees if desired. [ hpa: build fix only, no object code change ] Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable <stable@vger.kernel.org> # 3.9+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1371654926-11729-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-31x86/microcode_core_early.c: Define interfaces for early loading ucodeFenghua Yu
Define interfaces load_ucode_bsp() and load_ucode_ap() to load ucode on BSP and AP in early boot time. These are generic interfaces. Internally they call vendor specific implementations. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1356075872-3054-6-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-08-22x86, microcode: Add a refresh firmware flag to ->request_microcode_fwBorislav Petkov
This is done in preparation for teaching the ucode driver to either load a new ucode patches container from userspace or use an already cached version. No functionality change in this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/1344361461-10076-10-git-send-email-bp@amd64.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-08-22x86, microcode, AMD: Remove useless get_ucode_data wrapperBorislav Petkov
get_ucode_data was a trivial memcpy wrapper. Remove it so as not to obfuscate code unnecessarily with no obvious gain. No functional change. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/1344361461-10076-7-git-send-email-bp@amd64.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-14x86, microcode, AMD: Add a vendor-specific exit functionBorislav Petkov
This will be used to do cleanup work before the driver exits. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-11-10x86, microcode, AMD: Cleanup code a bitBorislav Petkov
get_ucode_data is a memcpy() wrapper which always returns 0. Move it into the header and make it an inline. Remove all code checking its return value and turn it into a void. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>