summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/xen
AgeCommit message (Collapse)Author
2017-02-14xen/privcmd: Add IOCTL_PRIVCMD_DM_OPPaul Durrant
Recently a new dm_op[1] hypercall was added to Xen to provide a mechanism for restricting device emulators (such as QEMU) to a limited set of hypervisor operations, and being able to audit those operations in the kernel of the domain in which they run. This patch adds IOCTL_PRIVCMD_DM_OP as gateway for __HYPERVISOR_dm_op. NOTE: There is no requirement for user-space code to bounce data through locked memory buffers (as with IOCTL_PRIVCMD_HYPERCALL) since privcmd has enough information to lock the original buffers directly. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=524a98c2 Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30xen: Remove event channel notification through Xen PCI platform deviceKarimAllah Ahmed
Ever since commit 254d1a3f02eb ("xen/pv-on-hvm kexec: shutdown watches from old kernel") using the INTx interrupt from Xen PCI platform device for event channel notification would just lockup the guest during bootup. postcore_initcall now calls xs_reset_watches which will eventually try to read a value from XenStore and will get stuck on read_reply at XenBus forever since the platform driver is not probed yet and its INTx interrupt handler is not registered yet. That means that the guest can not be notified at this moment of any pending event channels and none of the per-event handlers will ever be invoked (including the XenStore one) and the reply will never be picked up by the kernel. The exact stack where things get stuck during xenbus_init: -xenbus_init -xs_init -xs_reset_watches -xenbus_scanf -xenbus_read -xs_single -xs_single -xs_talkv Vector callbacks have always been the favourite event notification mechanism since their introduction in commit 38e20b07efd5 ("x86/xen: event channels delivery on HVM.") and the vector callback feature has always been advertised for quite some time by Xen that's why INTx was broken for several years now without impacting anyone. Luckily this also means that event channel notification through INTx is basically dead-code which can be safely removed without impacting anybody since it has been effectively disabled for more than 4 years with nobody complaining about it (at least as far as I'm aware of). This commit removes event channel notification through Xen PCI platform device. Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Julien Grall <julien.grall@citrix.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: xen-devel@lists.xenproject.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-25x86/xen: update cpuid.h from Xen-4.7Vitaly Kuznetsov
Update cpuid.h header from xen hypervisor tree to get XEN_HVM_CPUID_VCPU_ID_PRESENT definition. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-03-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - fix hotplug bugs - fix irq live lock - fix various topology handling bugs - fix APIC ACK ordering - fix PV iopl handling - fix speling - fix/tweak memcpy_mcsafe() return value - fix fbcon bug - remove stray prototypes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msr: Remove unused native_read_tscp() x86/apic: Remove declaration of unused hw_nmi_is_cpu_stuck x86/oprofile/nmi: Add missing hotplug FROZEN handling x86/hpet: Use proper mask to modify hotplug action x86/apic/uv: Fix the hotplug notifier x86/apb/timer: Use proper mask to modify hotplug action x86/topology: Use total_cpus not nr_cpu_ids for logical packages x86/topology: Fix Intel HT disable x86/topology: Fix logical package mapping x86/irq: Cure live lock in fixup_irqs() x86/tsc: Prevent NULL pointer deref in calibrate_delay_is_known() x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt() x86/iopl: Fix iopl capability check on Xen PV x86/iopl/64: Properly context-switch IOPL on Xen PV selftests/x86: Add an iopl test x86/mm, x86/mce: Fix return type/value for memcpy_mcsafe() x86/video: Don't assume all FB devices are PCI devices arch/x86/irq: Purge useless handler declarations from hw_irq.h x86: Fix misspellings in comments
2016-03-17x86/iopl/64: Properly context-switch IOPL on Xen PVAndy Lutomirski
On Xen PV, regs->flags doesn't reliably reflect IOPL and the exit-to-userspace code doesn't change IOPL. We need to context switch it manually. I'm doing this without going through paravirt because this is specific to Xen PV. After the dust settles, we can merge this with the 32-bit code, tidy up the iopl syscall implementation, and remove the set_iopl pvop entirely. Fixes XSA-171. Reviewewd-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/693c3bd7aeb4d3c27c92c622b7d0f554a458173c.1458162709.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-25Merge branch 'x86/debug' into core/objtool, to pick up frame pointer fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-24x86/xen: Add stack frame dependency to hypercall inline asm callsJosh Poimboeuf
If a hypercall is inlined at the beginning of a function, gcc can insert the call instruction before setting up a stack frame, which breaks frame pointer convention if CONFIG_FRAME_POINTER is enabled and can result in a bad stack trace. Force a stack frame to be created if CONFIG_FRAME_POINTER is enabled by listing the stack pointer as an output operand for the hypercall inline asm statements. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/c6face5a46713108bded9c4c103637222abc4528.1453405861.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-15xen/pcifront: Report the errors better.Konrad Rzeszutek Wilk
The messages should be different depending on the type of error. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-12-21xen: rename dom0_op to platform_opStefano Stabellini
The dom0_op hypercall has been renamed to platform_op since Xen 3.2, which is ancient, and modern upstream Linux kernels cannot run as dom0 and it anymore anyway. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-10-23xen/arm: Enable cpu_hotplug.cStefano Stabellini
Build cpu_hotplug for ARM and ARM64 guests. Rename arch_(un)register_cpu to xen_(un)register_cpu and provide an empty implementation on ARM and ARM64. On x86 just call arch_(un)register_cpu as we are already doing. Initialize cpu_hotplug on ARM. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-10-23xen/swiotlb: Pass addresses rather than frame numbers to xen_arch_need_swiotlbJulien Grall
With 64KB page granularity support, the frame number will be different. It will be easier to modify the behavior in a single place rather than in each caller. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/grant: Introduce helpers to split a page into grantJulien Grall
Currently, a grant is always based on the Xen page granularity (i.e 4KB). When Linux is using a different page granularity, a single page will be split between multiple grants. The new helpers will be in charge of splitting the Linux page into grants and call a function given by the caller on each grant. Also provide an helper to count the number of grants within a given contiguous region. Note that the x86/include/asm/xen/page.h is now including xen/interface/grant_table.h rather than xen/grant_table.h. It's necessary because xen/grant_table.h depends on asm/xen/page.h and will break the compilation. Furthermore, only definition in interface/grant_table.h is required. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23x86/xen: export xen_alloc_p2m_entry()David Vrabel
Rename alloc_p2m() to xen_alloc_p2m_entry() and export it. This is useful for ensuring that a p2m entry is allocated (i.e., not a shared missing or identity entry) so that subsequent set_phys_to_machine() calls will require no further allocations. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Make xen_alloc_p2m_entry() a nop on auto-xlate guests.
2015-09-28xen: use correct type for HYPERVISOR_memory_op()Juergen Gross
HYPERVISOR_memory_op() is defined to return an "int" value. This is wrong, as the Xen hypervisor will return "long". The sub-function XENMEM_maximum_reservation returns the maximum number of pages for the current domain. An int will overflow for a domain configured with 8TB of memory or more. Correct this by using the correct type. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: Use correctly the Xen memory terminologiesJulien Grall
Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN is meant, I suspect this is because the first support for Xen was for PV. This resulted in some misimplementation of helpers on ARM and confused developers about the expected behavior. For instance, with pfn_to_mfn, we expect to get an MFN based on the name. Although, if we look at the implementation on x86, it's returning a GFN. For clarity and avoid new confusion, replace any reference to mfn with gfn in any helpers used by PV drivers. The x86 code will still keep some reference of pfn_to_mfn which may be used by all kind of guests No changes as been made in the hypercall field, even though they may be invalid, in order to keep the same as the defintion in xen repo. Note that page_to_mfn has been renamed to xen_page_to_gfn to avoid a name to close to the KVM function gfn_to_page. Take also the opportunity to simplify simple construction such as pfn_to_mfn(page_to_pfn(page)) into xen_page_to_gfn. More complex clean up will come in follow-up patches. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=e758ed14f390342513405dd766e874934573e6cb Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: Make clear that swiotlb and biomerge are dealing with DMA addressJulien Grall
The swiotlb is required when programming a DMA address on ARM when a device is not protected by an IOMMU. In this case, the DMA address should always be equal to the machine address. For DOM0 memory, Xen ensure it by have an identity mapping between the guest address and host address. However, when mapping a foreign grant reference, the 1:1 model doesn't work. For ARM guest, most of the callers of pfn_to_mfn expects to get a GFN (Guest Frame Number), i.e a PFN (Page Frame Number) from the Linux point of view given that all ARM guest are auto-translated. Even though the name pfn_to_mfn is misleading, we need to ensure that those caller get a GFN and not by mistake a MFN. In pratical, I haven't seen error related to this but we should fix it for the sake of correctness. In order to fix the implementation of pfn_to_mfn on ARM in a follow-up patch, we have to introduce new helpers to return the DMA from a PFN and the invert. On x86, the new helpers will be an alias of pfn_to_mfn and mfn_to_pfn. The helpers will be used in swiotlb and xen_biovec_phys_mergeable. This is necessary in the latter because we have to ensure that the biovec code will not try to merge a biovec using foreign page and another using Linux memory. Lastly, the helper mfn_to_local_pfn has been renamed to bfn_to_local_pfn given that the only usage was in swiotlb. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/PMU: Initialization code for Xen PMUBoris Ostrovsky
Map shared data structure that will hold CPU registers, VPMU context, V/PCPU IDs of the CPU interrupted by PMU interrupt. Hypervisor fills this information in its handler and passes it to the guest for further processing. Set up PMU VIRQ. Now that perf infrastructure will assume that PMU is available on a PV guest we need to be careful and make sure that accesses via RDPMC instruction don't cause fatal traps by the hypervisor. Provide a nop RDPMC handler. For the same reason avoid issuing a warning on a write to APIC's LVTPC. Both of these will be made functional in later patches. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/PMU: Sysfs interface for setting Xen PMU modeBoris Ostrovsky
Set Xen's PMU mode via /sys/hypervisor/pmu/pmu_mode. Add XENPMU hypercall. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen: remove no longer needed p2m.hJuergen Gross
Cleanup by removing arch/x86/xen/p2m.h as it isn't needed any more. Most definitions in this file are used in p2m.c only. Move those into p2m.c. set_phys_range_identity() is already declared in arch/x86/include/asm/xen/page.h, add __init annotation there. MAX_REMAP_RANGES isn't used at all, just delete it. The only define left is P2M_PER_PAGE which is moved to page.h as well. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen: allow more than 512 GB of RAM for 64 bit pv-domainsJuergen Gross
64 bit pv-domains under Xen are limited to 512 GB of RAM today. The main reason has been the 3 level p2m tree, which was replaced by the virtual mapped linear p2m list. Parallel to the p2m list which is being used by the kernel itself there is a 3 level mfn tree for usage by the Xen tools and eventually for crash dump analysis. For this tree the linear p2m list can serve as a replacement, too. As the kernel can't know whether the tools are capable of dealing with the p2m list instead of the mfn tree, the limit of 512 GB can't be dropped in all cases. This patch replaces the hard limit by a kernel parameter which tells the kernel to obey the 512 GB limit or not. The default is selected by a configuration parameter which specifies whether the 512 GB limit should be active per default for domUs (domain save/restore/migration and crash dump analysis are affected). Memory above the domain limit is returned to the hypervisor instead of being identity mapped, which was wrong anyway. The kernel configuration parameter to specify the maximum size of a domain can be deleted, as it is not relevant any more. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen: sync with xen headersJuergen Gross
Use the newest headers from the xen tree to get some new structure layouts. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/events: Support event channel rebind on ARMJulien Grall
Currently, the event channel rebind code is gated with the presence of the vector callback. The virtual interrupt controller on ARM has the concept of per-CPU interrupt (PPI) which allow us to support per-VCPU event channel. Therefore there is no need of vector callback for ARM. Xen is already using a free PPI to notify the guest VCPU of an event. Furthermore, the xen code initialization in Linux (see arch/arm/xen/enlighten.c) is requesting correctly a per-CPU IRQ. Introduce new helper xen_support_evtchn_rebind to allow architecture decide whether rebind an event is support or not. It will always return true on ARM and keep the same behavior on x86. This is also allow us to drop the usage of xen_have_vector_callback entirely in the ARM code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-05-06xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARMStefano Stabellini
Make sure that xen_swiotlb_init allocates buffers that are DMA capable when at least one memblock is available below 4G. Otherwise we assume that all devices on the SoC can cope with >4G addresses. We do this on ARM and ARM64, where dom0 is mapped 1:1, so pfn == mfn in this case. No functional changes on x86. From: Chen Baozi <baozich@gmail.com> Signed-off-by: Chen Baozi <baozich@gmail.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Chen Baozi <baozich@gmail.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-28xen: remove scratch frames for ballooned pages and m2p overrideDavid Vrabel
The scratch frame mappings for ballooned pages and the m2p override are broken. Remove them in preparation for replacing them with simpler mechanisms that works. The scratch pages did not ensure that the page was not in use. In particular, the foreign page could still be in use by hardware. If the guest reused the frame the hardware could read or write that frame. The m2p override did not handle the same frame being granted by two different grant references. Trying an M2P override lookup in this case is impossible. With the m2p override removed, the grant map/unmap for the kernel mappings (for x86 PV) can be easily batched in set_foreign_p2m_mapping() and clear_foreign_p2m_mapping(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-01-28xen/grant-table: pre-populate kernel unmap ops for xen_gnttab_unmap_refs()David Vrabel
When unmapping grants, instead of converting the kernel map ops to unmap ops on the fly, pre-populate the set of unmap ops. This allows the grant unmap for the kernel mappings to be trivially batched in the future. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-12-08xen: introduce helper functions to do safe read and write accessesJuergen Gross
Introduce two helper functions to safely read and write unsigned long values from or to memory when the access may fault because the mapping is non-present or read-only. These helpers can be used instead of open coded uses of __get_user() and __put_user() avoiding the need to do casts to fix sparse warnings. Use the helpers in page.h and p2m.c. This will fix the sparse warnings when doing "make C=1". Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen: switch to linear virtual mapped sparse p2m listJuergen Gross
At start of the day the Xen hypervisor presents a contiguous mfn list to a pv-domain. In order to support sparse memory this mfn list is accessed via a three level p2m tree built early in the boot process. Whenever the system needs the mfn associated with a pfn this tree is used to find the mfn. Instead of using a software walked tree for accessing a specific mfn list entry this patch is creating a virtual address area for the entire possible mfn list including memory holes. The holes are covered by mapping a pre-defined page consisting only of "invalid mfn" entries. Access to a mfn entry is possible by just using the virtual base address of the mfn list and the pfn as index into that list. This speeds up the (hot) path of determining the mfn of a pfn. Kernel build on a Dell Latitude E6440 (2 cores, HT) in 64 bit Dom0 showed following improvements: Elapsed time: 32:50 -> 32:35 System: 18:07 -> 17:47 User: 104:00 -> 103:30 Tested with following configurations: - 64 bit dom0, 8GB RAM - 64 bit dom0, 128 GB RAM, PCI-area above 4 GB - 32 bit domU, 512 MB, 8 GB, 43 GB (more wouldn't work even without the patch) - 32 bit domU, ballooning up and down - 32 bit domU, save and restore - 32 bit domU with PCI passthrough - 64 bit domU, 8 GB, 2049 MB, 5000 MB - 64 bit domU, ballooning up and down - 64 bit domU, save and restore - 64 bit domU with PCI passthrough Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen: Hide get_phys_to_machine() to be able to tune common pathJuergen Gross
Today get_phys_to_machine() is always called when the mfn for a pfn is to be obtained. Add a wrapper __pfn_to_mfn() as inline function to be able to avoid calling get_phys_to_machine() when possible as soon as the switch to a linear mapped p2m list has been done. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen: Delay invalidating extra memoryJuergen Gross
When the physical memory configuration is initialized the p2m entries for not pouplated memory pages are set to "invalid". As those pages are beyond the hypervisor built p2m list the p2m tree has to be extended. This patch delays processing the extra memory related p2m entries during the boot process until some more basic memory management functions are callable. This removes the need to create new p2m entries until virtual memory management is available. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen: Delay remapping memory of pv-domainJuergen Gross
Early in the boot process the memory layout of a pv-domain is changed to match the E820 map (either the host one for Dom0 or the Xen one) regarding placement of RAM and PCI holes. This requires removing memory pages initially located at positions not suitable for RAM and adding them later at higher addresses where no restrictions apply. To be able to operate on the hypervisor supported p2m list until a virtual mapped linear p2m list can be constructed, remapping must be delayed until virtual memory management is initialized, as the initial p2m list can't be extended unlimited at physical memory initialization time due to it's fixed structure. A further advantage is the reduction in complexity and code volume as we don't have to be careful regarding memory restrictions during p2m updates. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen: Make functions staticJuergen Gross
Some functions in arch/x86/xen/p2m.c are used locally only. Make them static. Rearrange the functions in p2m.c to avoid forward declarations. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen/pci: Use APIC directly when APIC virtualization hardware is availableBoris Ostrovsky
When hardware supports APIC/x2APIC virtualization we don't need to use pirqs for MSI handling and instead use APIC since most APIC accesses (MMIO or MSR) will now be processed without VMEXITs. As an example, netperf on the original code produces this profile (collected wih 'xentrace -e 0x0008ffff -T 5'): 342 cpu_change 260 CPUID 34638 HLT 64067 INJ_VIRQ 28374 INTR 82733 INTR_WINDOW 10 NPF 24337 TRAP 370610 vlapic_accept_pic_intr 307528 VMENTRY 307527 VMEXIT 140998 VMMCALL 127 wrap_buffer After applying this patch the same test shows 230 cpu_change 260 CPUID 36542 HLT 174 INJ_VIRQ 27250 INTR 222 INTR_WINDOW 20 NPF 24999 TRAP 381812 vlapic_accept_pic_intr 166480 VMENTRY 166479 VMEXIT 77208 VMMCALL 81 wrap_buffer ApacheBench results (ab -n 10000 -c 200) improve by about 10% Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen/arm/arm64: introduce xen_arch_need_swiotlbStefano Stabellini
Introduce an arch specific function to find out whether a particular dma mapping operation needs to bounce on the swiotlb buffer. On ARM and ARM64, if the page involved is a foreign page and the device is not coherent, we need to bounce because at unmap time we cannot execute any required cache maintenance operations (we don't know how to find the pfn from the mfn). No change of behaviour for x86. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-12-04xen: add a dma_addr_t dev_addr argument to xen_dma_map_pageStefano Stabellini
dev_addr is the machine address of the page. The new parameter can be used by the ARM and ARM64 implementations of xen_dma_map_page to find out if the page is a local page (pfn == mfn) or a foreign page (pfn != mfn). dev_addr could be retrieved again from the physical address, using pfn_to_mfn, but it requires accessing an rbtree. Since we already have the dev_addr in our hands at the call site there is no need to get the mfn twice. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-04-24arm: xen: implement multicall hypercall support.Ian Campbell
As part of this make the usual change to xen_ulong_t in place of unsigned long. This change has no impact on x86. The Linux definition of struct multicall_entry.result differs from the Xen definition, I think for good reasons, and used a long rather than an unsigned long. Therefore introduce a xen_long_t, which is a long on x86 architectures and a signed 64-bit integer on ARM. Use uint32_t nr_calls on x86 for consistency with the ARM definition. Build tested on amd64 and i386 builds. Runtime tested on ARM. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-03-18xen/grant-table: Refactor gnttab_[un]map_refs to avoid m2p_overrideZoltan Kiss
The grant mapping API does m2p_override unnecessarily: only gntdev needs it, for blkback and future netback patches it just cause a lock contention, as those pages never go to userspace. Therefore this series does the following: - the bulk of the original function (everything after the mapping hypercall) is moved to arch-dependent set/clear_foreign_p2m_mapping - the "if (xen_feature(XENFEAT_auto_translated_physmap))" branch goes to ARM - therefore the ARM function could be much smaller, the m2p_override stubs could be also removed - on x86 the set_phys_to_machine calls were moved up to this new funcion from m2p_override functions - and m2p_override functions are only called when there is a kmap_ops param It also removes a stray space from arch/x86/include/asm/xen/page.h. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Suggested-by: Anthony Liguori <aliguori@amazon.com> Suggested-by: David Vrabel <david.vrabel@citrix.com> Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-02-03Revert "xen/grant-table: Avoid m2p_override during mapping"Konrad Rzeszutek Wilk
This reverts commit 08ece5bb2312b4510b161a6ef6682f37f4eac8a1. As it breaks ARM builds and needs more attention on the ARM side. Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-31xen/grant-table: Avoid m2p_override during mappingZoltan Kiss
The grant mapping API does m2p_override unnecessarily: only gntdev needs it, for blkback and future netback patches it just cause a lock contention, as those pages never go to userspace. Therefore this series does the following: - the original functions were renamed to __gnttab_[un]map_refs, with a new parameter m2p_override - based on m2p_override either they follow the original behaviour, or just set the private flag and call set_phys_to_machine - gnttab_[un]map_refs are now a wrapper to call __gnttab_[un]map_refs with m2p_override false - a new function gnttab_[un]map_refs_userspace provides the old behaviour It also removes a stray space from page.h and change ret to 0 if XENFEAT_auto_translated_physmap, as that is the only possible return value there. v2: - move the storing of the old mfn in page->index to gnttab_map_refs - move the function header update to a separate patch v3: - a new approach to retain old behaviour where it needed - squash the patches into one v4: - move out the common bits from m2p* functions, and pass pfn/mfn as parameter - clear page->private before doing anything with the page, so m2p_find_override won't race with this v5: - change return value handling in __gnttab_[un]map_refs - remove a stray space in page.h - add detail why ret = 0 now at some places v6: - don't pass pfn to m2p* functions, just get it locally Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Suggested-by: David Vrabel <david.vrabel@citrix.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-06xen/grant: Implement an grant frame array struct (v3).Konrad Rzeszutek Wilk
The 'xen_hvm_resume_frames' used to be an 'unsigned long' and contain the virtual address of the grants. That was OK for most architectures (PVHVM, ARM) were the grants are contiguous in memory. That however is not the case for PVH - in which case we will have to do a lookup for each virtual address for the PFN. Instead of doing that, lets make it a structure which will contain the array of PFNs, the virtual address and the count of said PFNs. Also provide a generic functions: gnttab_setup_auto_xlat_frames and gnttab_free_auto_xlat_frames to populate said structure with appropriate values for PVHVM and ARM. To round it off, change the name from 'xen_hvm_resume_frames' to a more descriptive one - 'xen_auto_xlat_grant_frames'. For PVH, in patch "xen/pvh: Piggyback on PVHVM for grant driver" we will populate the 'xen_auto_xlat_grant_frames' by ourselves. v2 moves the xen_remap in the gnttab_setup_auto_xlat_frames and also introduces xen_unmap for gnttab_free_auto_xlat_frames. Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v3: Based on top of 'asm/xen/page.h: remove redundant semicolon'] Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/p2m: Check for auto-xlat when doing mfn_to_local_pfn.Mukesh Rathor
Most of the functions in page.h are prefaced with if (xen_feature(XENFEAT_auto_translated_physmap)) return mfn; Except the mfn_to_local_pfn. At a first sight, the function should work without this patch - as the 'mfn_to_mfn' has a similar check. But there are no such check in the 'get_phys_to_machine' function - so we would crash in there. This fixes it by following the convention of having the check for auto-xlat in these static functions. Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-10-25xen: introduce xen_dma_map/unmap_page and xen_dma_sync_single_for_cpu/deviceStefano Stabellini
Introduce xen_dma_map_page, xen_dma_unmap_page, xen_dma_sync_single_for_cpu and xen_dma_sync_single_for_device. They have empty implementations on x86 and ia64 but they call the corresponding platform dma_ops function on arm and arm64. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Changes in v9: - xen_dma_map_page return void, avoid page_to_phys.
2013-10-09xen: introduce xen_alloc/free_coherent_pagesStefano Stabellini
xen_swiotlb_alloc_coherent needs to allocate a coherent buffer for cpu and devices. On native x86 is sufficient to call __get_free_pages in order to get a coherent buffer, while on ARM (and potentially ARM64) we need to call the native dma_ops->alloc implementation. Introduce xen_alloc_coherent_pages to abstract the arch specific buffer allocation. Similarly introduce xen_free_coherent_pages to free a coherent buffer: on x86 is simply a call to free_pages while on ARM and ARM64 is arm_dma_ops.free. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Changes in v7: - rename __get_dma_ops to __generic_dma_ops; - call __generic_dma_ops(hwdev)->alloc/free on arm64 too. Changes in v6: - call __get_dma_ops to get the native dma_ops pointer on arm.
2013-09-25Merge tag 'stable/for-linus-3.12-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from Konrad Rzeszutek Wilk: "Bug-fixes and one update to the kernel-paramters.txt documentation. - Fix PV spinlocks triggering jump_label code bug - Remove extraneous code in the tpm front driver - Fix ballooning out of pages when non-preemptible - Fix deadlock when using a 32-bit initial domain with large amount of memory - Add xen_nopvpsin parameter to the documentation" * tag 'stable/for-linus-3.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/spinlock: Document the xen_nopvspin parameter. xen/p2m: check MFN is in range before using the m2p table xen/balloon: don't alloc page while non-preemptible xen: Do not enable spinlocks before jump_label_init() has executed tpm: xen-tpmfront: Remove the locality sysfs attribute tpm: xen-tpmfront: Fix default durations
2013-09-25xen/p2m: check MFN is in range before using the m2p tableDavid Vrabel
On hosts with more than 168 GB of memory, a 32-bit guest may attempt to grant map an MFN that is error cannot lookup in its mapping of the m2p table. There is an m2p lookup as part of m2p_add_override() and m2p_remove_override(). The lookup falls off the end of the mapped portion of the m2p and (because the mapping is at the highest virtual address) wraps around and the lookup causes a fault on what appears to be a user space address. do_page_fault() (thinking it's a fault to a userspace address), tries to lock mm->mmap_sem. If the gntdev device is used for the grant map, m2p_add_override() is called from from gnttab_mmap() with mm->mmap_sem already locked. do_page_fault() then deadlocks. The deadlock would most commonly occur when a 64-bit guest is started and xenconsoled attempts to grant map its console ring. Introduce mfn_to_pfn_no_overrides() which checks the MFN is within the mapped portion of the m2p table before accessing the table and use this in m2p_add_override(), m2p_remove_override(), and mfn_to_pfn() (which already had the correct range check). All faults caused by accessing the non-existant parts of the m2p are thus within the kernel address space and exception_fixup() is called without trying to lock mm->mmap_sem. This means that for MFNs that are outside the mapped range of the m2p then mfn_to_pfn() will always look in the m2p overrides. This is correct because it must be a foreign MFN (and the PFN in the m2p in this case is only relevant for the other domain). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@citrix.com> Cc: Jan Beulich <JBeulich@suse.com> -- v3: check for auto_translated_physmap in mfn_to_pfn_no_overrides() v2: in mfn_to_pfn() look in m2p_overrides if the MFN is out of range as it's probably foreign. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-09-04Merge tag 'stable/for-linus-3.12-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from Konrad Rzeszutek Wilk: "A couple of features and a ton of bug-fixes. There is also some maintership changes. Jeremy is enjoying the full-time work at the startup and as much as he would love to help - he can't find the time. I have a bunch of other things that I promised to work on - paravirt diet, get SWIOTLB working everywhere, etc, but haven't been able to find the time. As such both David Vrabel and Boris Ostrovsky have graciously volunteered to help with the maintership role. They will keep the lid on regressions, bug-fixes, etc. I will be in the background to help - but eventually there will be less of me doing the Xen GIT pulls and more of them. Stefano is still doing the ARM/ARM64 and will continue on doing so. Features: - Xen Trusted Platform Module (TPM) frontend driver - with the backend in MiniOS. - Scalability improvements in event channel. - Two extra Xen co-maintainers (David, Boris) and one going away (Jeremy) Bug-fixes: - Make the 1:1 mapping work during early bootup on selective regions. - Add scratch page to balloon driver to deal with unexpected code still holding on stale pages. - Allow NMIs on PV guests (64-bit only) - Remove unnecessary TLB flush in M2P code. - Fixes duplicate callbacks in Xen granttable code. - Fixes in PRIVCMD_MMAPBATCH ioctls to allow retries - Fix for events being lost due to rescheduling on different VCPUs. - More documentation" * tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (23 commits) hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc drivers/xen-tpmfront: Fix compile issue with missing option. xen/balloon: don't set P2M entry for auto translated guest xen/evtchn: double free on error Xen: Fix retry calls into PRIVCMD_MMAPBATCH*. xen/pvhvm: Initialize xen panic handler for PVHVM guests xen/m2p: use GNTTABOP_unmap_and_replace to reinstate the original mapping xen: fix ARM build after 6efa20e4 MAINTAINERS: Remove Jeremy from the Xen subsystem. xen/events: document behaviour when scanning the start word for events x86/xen: during early setup, only 1:1 map the ISA region x86/xen: disable premption when enabling local irqs swiotlb-xen: replace dma_length with sg_dma_len() macro swiotlb: replace dma_length with sg_dma_len() macro xen/balloon: set a mapping for ballooned out pages xen/evtchn: improve scalability by using per-user locks xen/p2m: avoid unneccesary TLB flush in m2p_remove_override() MAINTAINERS: Add in two extra co-maintainers of the Xen tree. MAINTAINERS: Update the Xen subsystem's with proper mailing list. xen: replace strict_strtoul() with kstrtoul() ...
2013-08-09xen: Support 64-bit PV guest receiving NMIsKonrad Rzeszutek Wilk
This is based on a patch that Zhenzhong Duan had sent - which was missing some of the remaining pieces. The kernel has the logic to handle Xen-type-exceptions using the paravirt interface in the assembler code (see PARAVIRT_ADJUST_EXCEPTION_FRAME - pv_irq_ops.adjust_exception_frame and and INTERRUPT_RETURN - pv_cpu_ops.iret). That means the nmi handler (and other exception handlers) use the hypervisor iret. The other changes that would be neccessary for this would be to translate the NMI_VECTOR to one of the entries on the ipi_vector and make xen_send_IPI_mask_allbutself use different events. Fortunately for us commit 1db01b4903639fcfaec213701a494fe3fb2c490b (xen: Clean up apic ipi interface) implemented this and we piggyback on the cleanup such that the apic IPI interface will pass the right vector value for NMI. With this patch we can trigger NMIs within a PV guest (only tested x86_64). For this to work with normal PV guests (not initial domain) we need the domain to be able to use the APIC ops - they are already implemented to use the Xen event channels. For that to be turned on in a PV domU we need to remove the masking of X86_FEATURE_APIC. Incidentally that means kgdb will also now work within a PV guest without using the 'nokgdbroundup' workaround. Note that the 32-bit version is different and this patch does not enable that. CC: Lisa Nguyen <lisa@xenapiadmin.com> CC: Ben Guthro <benjamin.guthro@citrix.com> CC: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v1: Fixed up per David Vrabel comments] Reviewed-by: Ben Guthro <benjamin.guthro@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2013-08-05xen: Switch to use hypervisor_cpuid_base()Jason Wang
Switch to use hypervisor_cpuid_base() to detect Xen. Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: http://lkml.kernel.org/r/1374742475-2485-2-git-send-email-jasowang@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-03-22xen-pciback: notify hypervisor about devices intended to be assigned to guestsJan Beulich
For MSI-X capable devices the hypervisor wants to write protect the MSI-X table and PBA, yet it can't assume that resources have been assigned to their final values at device enumeration time. Thus have pciback do that notification, as having the device controlled by it is a prerequisite to assigning the device to guests anyway. This is the kernel part of hypervisor side commit 4245d33 ("x86/MSI: add mechanism to fully protect MSI-X table from PV guest accesses") on the master branch of git://xenbits.xen.org/xen.git. CC: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
generated by cgit (git 2.34.1) at 2024-06-09 14:04:32 +0000