summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/acpi/boot.c
AgeCommit message (Collapse)Author
2023-12-18x86/acpi: Handle bogus MADT APIC tables gracefullyThomas Gleixner
The recent fix to ignore invalid x2APIC entries inadvertently broke systems with creative MADT APIC tables. The affected systems have APIC MADT tables where all entries have invalid APIC IDs (0xFF), which means they register exactly zero CPUs. But the condition to ignore the entries of APIC IDs < 255 in the X2APIC MADT table is solely based on the count of MADT APIC table entries. As a consequence, the affected machines enumerate no secondary CPUs at all because the APIC table has entries and therefore the X2APIC table entries with APIC IDs < 255 are ignored. Change the condition so that the APIC table preference for APIC IDs < 255 only becomes effective when the APIC table has valid APIC ID entries. IOW, an APIC table full of invalid APIC IDs is considered to be empty which in consequence enables the X2APIC table entries with a APIC ID < 255 and restores the expected behaviour. Fixes: ec9aedb2aa1a ("x86/acpi: Ignore invalid x2APIC entries") Reported-by: John Sperbeck <jsperbeck@google.com> Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/169953729188.3135.6804572126118798018.tip-bot2@tip-bot2
2023-11-19Merge tag 'x86_urgent_for_v6.7_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Ignore invalid x2APIC entries in order to not waste per-CPU data - Fix a back-to-back signals handling scenario when shadow stack is in use - A documentation fix - Add Kirill as TDX maintainer * tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/acpi: Ignore invalid x2APIC entries x86/shstk: Delay signal entry SSP write until after user accesses x86/Documentation: Indent 'note::' directive for protocol version number note MAINTAINERS: Add Intel TDX entry
2023-11-09x86/acpi: Ignore invalid x2APIC entriesZhang Rui
Currently, the kernel enumerates the possible CPUs by parsing both ACPI MADT Local APIC entries and x2APIC entries. So CPUs with "valid" APIC IDs, even if they have duplicated APIC IDs in Local APIC and x2APIC, are always enumerated. Below is what ACPI MADT Local APIC and x2APIC describes on an Ivebridge-EP system, [02Ch 0044 1] Subtable Type : 00 [Processor Local APIC] [02Fh 0047 1] Local Apic ID : 00 ... [164h 0356 1] Subtable Type : 00 [Processor Local APIC] [167h 0359 1] Local Apic ID : 39 [16Ch 0364 1] Subtable Type : 00 [Processor Local APIC] [16Fh 0367 1] Local Apic ID : FF ... [3ECh 1004 1] Subtable Type : 09 [Processor Local x2APIC] [3F0h 1008 4] Processor x2Apic ID : 00000000 ... [B5Ch 2908 1] Subtable Type : 09 [Processor Local x2APIC] [B60h 2912 4] Processor x2Apic ID : 00000077 As a result, kernel shows "smpboot: Allowing 168 CPUs, 120 hotplug CPUs". And this wastes significant amount of memory for the per-cpu data. Plus this also breaks https://lore.kernel.org/all/87edm36qqb.ffs@tglx/, because __max_logical_packages is over-estimated by the APIC IDs in the x2APIC entries. According to https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#processor-local-x2apic-structure: "[Compatibility note] On some legacy OSes, Logical processors with APIC ID values less than 255 (whether in XAPIC or X2APIC mode) must use the Processor Local APIC structure to convey their APIC information to OSPM, and those processors must be declared in the DSDT using the Processor() keyword. Logical processors with APIC ID values 255 and greater must use the Processor Local x2APIC structure and be declared using the Device() keyword." Therefore prevent the registration of x2APIC entries with an APIC ID less than 255 if the local APIC table enumerates valid APIC IDs. [ tglx: Simplify the logic ] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230702162802.344176-1-rui.zhang@intel.com
2023-10-30Merge tag 'x86-core-2023-10-29-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Thomas Gleixner: - Limit the hardcoded topology quirk for Hygon CPUs to those which have a model ID less than 4. The newer models have the topology CPUID leaf 0xB correctly implemented and are not affected. - Make SMT control more robust against enumeration failures SMT control was added to allow controlling SMT at boottime or runtime. The primary purpose was to provide a simple mechanism to disable SMT in the light of speculation attack vectors. It turned out that the code is sensible to enumeration failures and worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration which means the primary thread mask is not set up correctly. By chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes the hotplug control stay at its default value "enabled". So the mask is never evaluated. The ongoing rework of the topology evaluation caused XEN/PV to end up with smp_num_siblings == 1, which sets the SMT control to "not supported" and the empty primary thread mask causes the hotplug core to deny the bringup of the APS. Make the decision logic more robust and take 'not supported' and 'not implemented' into account for the decision whether a CPU should be booted or not. - Fake primary thread mask for XEN/PV Pretend that all XEN/PV vCPUs are primary threads, which makes the usage of the primary thread mask valid on XEN/PV. That is consistent with because all of the topology information on XEN/PV is fake or even non-existent. - Encapsulate topology information in cpuinfo_x86 Move the randomly scattered topology data into a separate data structure for readability and as a preparatory step for the topology evaluation overhaul. - Consolidate APIC ID data type to u32 It's fixed width hardware data and not randomly u16, int, unsigned long or whatever developers decided to use. - Cure the abuse of cpuinfo for persisting logical IDs. Per CPU cpuinfo is used to persist the logical package and die IDs. That's really not the right place simply because cpuinfo is subject to be reinitialized when a CPU goes through an offline/online cycle. Use separate per CPU data for the persisting to enable the further topology management rework. It will be removed once the new topology management is in place. - Provide a debug interface for inspecting topology information Useful in general and extremly helpful for validating the topology management rework in terms of correctness or "bug" compatibility. * tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too x86/cpu: Provide debug interface x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids x86/apic: Use u32 for wakeup_secondary_cpu[_64]() x86/apic: Use u32 for [gs]et_apic_id() x86/apic: Use u32 for phys_pkg_id() x86/apic: Use u32 for cpu_present_to_apicid() x86/apic: Use u32 for check_apicid_used() x86/apic: Use u32 for APIC IDs in global data x86/apic: Use BAD_APICID consistently x86/cpu: Move cpu_l[l2]c_id into topology info x86/cpu: Move logical package and die IDs into topology info x86/cpu: Remove pointless evaluation of x86_coreid_bits x86/cpu: Move cu_id into topology info x86/cpu: Move cpu_core_id into topology info hwmon: (fam15h_power) Use topology_core_id() scsi: lpfc: Use topology_core_id() x86/cpu: Move cpu_die_id into topology info x86/cpu: Move phys_proc_id into topology info x86/cpu: Encapsulate topology information in cpuinfo_x86 ...
2023-10-27x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibilityThomas Gleixner
David and a few others reported that on certain newer systems some legacy interrupts fail to work correctly. Debugging revealed that the BIOS of these systems leaves the legacy PIC in uninitialized state which makes the PIC detection fail and the kernel switches to a dummy implementation. Unfortunately this fallback causes quite some code to fail as it depends on checks for the number of legacy PIC interrupts or the availability of the real PIC. In theory there is no reason to use the PIC on any modern system when IO/APIC is available, but the dependencies on the related checks cannot be resolved trivially and on short notice. This needs lots of analysis and rework. The PIC detection has been added to avoid quirky checks and force selection of the dummy implementation all over the place, especially in VM guest scenarios. So it's not an option to revert the relevant commit as that would break a lot of other scenarios. One solution would be to try to initialize the PIC on detection fail and retry the detection, but that puts the burden on everything which does not have a PIC. Fortunately the ACPI/MADT table header has a flag field, which advertises in bit 0 that the system is PCAT compatible, which means it has a legacy 8259 PIC. Evaluate that bit and if set avoid the detection routine and keep the real PIC installed, which then gets initialized (for nothing) and makes the rest of the code with all the dependencies work again. Fixes: e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately") Reported-by: David Lazar <dlazar@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: David Lazar <dlazar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003 Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
2023-10-10x86/apic: Use u32 for wakeup_secondary_cpu[_64]()Thomas Gleixner
APIC IDs are used with random data types u16, u32, int, unsigned int, unsigned long. Make it all consistently use u32 because that reflects the hardware register width. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085113.233274223@linutronix.de
2023-10-10x86/apic: Use BAD_APICID consistentlyThomas Gleixner
APIC ID checks compare with BAD_APICID all over the place, but some initializers and some code which fiddles with global data structure use -1[U] instead. That simply cannot work at all. Fix it up and use BAD_APICID consistently all over the place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.862835121@linutronix.de
2023-08-30Merge tag 'x86_apic_for_6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Dave Hansen: "This includes a very thorough rework of the 'struct apic' handlers. Quite a variety of them popped up over the years, especially in the 32-bit days when odd apics were much more in vogue. The end result speaks for itself, which is a removal of a ton of code and static calls to replace indirect calls. If there's any breakage here, it's likely to be around the 32-bit museum pieces that get light to no testing these days. Summary: - Rework apic callbacks, getting rid of unnecessary ones and coalescing lots of silly duplicates. - Use static_calls() instead of indirect calls for apic->foo() - Tons of cleanups an crap removal along the way" * tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits) x86/apic: Turn on static calls x86/apic: Provide static call infrastructure for APIC callbacks x86/apic: Wrap IPI calls into helper functions x86/apic: Mark all hotpath APIC callback wrappers __always_inline x86/xen/apic: Mark apic __ro_after_init x86/apic: Convert other overrides to apic_update_callback() x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb() x86/apic: Provide apic_update_callback() x86/xen/apic: Use standard apic driver mechanism for Xen PV x86/apic: Provide common init infrastructure x86/apic: Wrap apic->native_eoi() into a helper x86/apic: Nuke ack_APIC_irq() x86/apic: Remove pointless arguments from [native_]eoi_write() x86/apic/noop: Tidy up the code x86/apic: Remove pointless NULL initializations x86/apic: Sanitize APIC ID range validation x86/apic: Prepare x2APIC for using apic::max_apic_id x86/apic: Simplify X2APIC ID validation x86/apic: Add max_apic_id member x86/apic: Wrap APIC ID validation into an inline ...
2023-08-09ACPI: resource: Honor MADT INT_SRC_OVR settings for IRQ1 on AMD ZenHans de Goede
On AMD Zen acpi_dev_irq_override() by default prefers the DSDT IRQ 1 settings over the MADT settings. This causes the keyboard to malfunction on some laptop models (see Links), all models from the Links have an INT_SRC_OVR MADT entry for IRQ 1. Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217336 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217406 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-09x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()Thomas Gleixner
Switch them over to apic_update_callback() and remove the code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
2023-08-09x86/apic: Wrap APIC ID validation into an inlineThomas Gleixner
Prepare for removing the callback and making this as simple comparison to an upper limit, which is the obvious solution to do for limit checks... Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
2023-08-09x86/apic: Remove the pointless APIC version checkThomas Gleixner
This historical leftover is really uninteresting today. Whatever MPTABLE or MADT delivers we only trust the hardware anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
2023-08-09x86/apic/ioapic: Rename skip_ioapic_setupThomas Gleixner
Another variable name which is confusing at best. Convert to bool. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
2023-04-25Merge tag 'x86_acpi_for_v6.4_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 ACPI update from Borislav Petkov: - Improve code generation in ACPI's global lock's acquisition function * tag 'x86_acpi_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ACPI/boot: Improve __acpi_acquire_global_lock
2023-03-30x86/acpi/boot: Correct acpi_is_processor_usable() checkEric DeVolder
The logic in acpi_is_processor_usable() requires the online capable bit be set for hotpluggable CPUs. The online capable bit has been introduced in ACPI 6.3. However, for ACPI revisions < 6.3 which do not support that bit, CPUs should be reported as usable, not the other way around. Reverse the check. [ bp: Rewrite commit message. ] Fixes: e2869bd7af60 ("x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC") Suggested-by: Miguel Luis <miguel.luis@oracle.com> Suggested-by: Boris Ostrovsky <boris.ovstrosky@oracle.com> Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: David R <david@unsolicited.net> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20230327191026.3454-2-eric.devolder@oracle.com
2023-03-30x86/ACPI/boot: Use FADT version to check support for online capableMario Limonciello
ACPI 6.3 introduced the online capable bit, and also introduced MADT version 5. Latter was used to distinguish whether the offset storing online capable could be used. However ACPI 6.2b has MADT version "45" which is for an errata version of the ACPI 6.2 spec. This means that the Linux code for detecting availability of MADT will mistakenly flag ACPI 6.2b as supporting online capable which is inaccurate as it's an ACPI 6.3 feature. Instead use the FADT major and minor revision fields to distinguish this. [ bp: Massage. ] Fixes: aa06e20f1be6 ("x86/ACPI: Don't add CPUs that are not online capable") Reported-by: Eric DeVolder <eric.devolder@oracle.com> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/943d2445-84df-d939-f578-5d8240d342cc@unsolicited.net
2023-03-22x86/ACPI/boot: Improve __acpi_acquire_global_lockUros Bizjak
Improve __acpi_acquire_global_lock by using a temporary variable. This enables compiler to perform if-conversion and improves generated code from: ... 72a: d1 ea shr %edx 72c: 83 e1 fc and $0xfffffffc,%ecx 72f: 83 e2 01 and $0x1,%edx 732: 09 ca or %ecx,%edx 734: 83 c2 02 add $0x2,%edx 737: f0 0f b1 17 lock cmpxchg %edx,(%rdi) 73b: 75 e9 jne 726 <__acpi_acquire_global_lock+0x6> 73d: 83 e2 03 and $0x3,%edx 740: 31 c0 xor %eax,%eax 742: 83 fa 03 cmp $0x3,%edx 745: 0f 95 c0 setne %al 748: f7 d8 neg %eax to: ... 72a: d1 e9 shr %ecx 72c: 83 e2 fc and $0xfffffffc,%edx 72f: 83 e1 01 and $0x1,%ecx 732: 09 ca or %ecx,%edx 734: 83 c2 02 add $0x2,%edx 737: f0 0f b1 17 lock cmpxchg %edx,(%rdi) 73b: 75 e9 jne 726 <__acpi_acquire_global_lock+0x6> 73d: 8d 41 ff lea -0x1(%rcx),%eax BTW: the compiler could generate: lea 0x2(%rcx,%rdx,1),%edx instead of: or %ecx,%edx add $0x2,%edx but unwated conversion from add to or when bits are known to be zero prevents this improvement. This is GCC PR108477. No functional change intended. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/all/20230320212012.12704-1-ubizjak%40gmail.com
2023-02-20Merge tag 'x86-boot-2023-02-20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: - Robustify/fix calling startup_{32,64}() from the decompressor code, and removing x86 quirk from scripts/head-object-list.txt as a result. - Do not register processors that cannot be onlined for x2APIC * tag 'x86-boot-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC scripts/head-object-list: Remove x86 from the list x86/boot: Robustify calling startup_{32,64}() from the decompressor code
2023-01-26x86/ACPI/boot: Use try_cmpxchg() in __acpi_{acquire,release}_global_lock()Uros Bizjak
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in __acpi_{acquire,release}_global_lock(). x86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after CMPXCHG (and related MOV instruction in front of CMPXCHG). Also, try_cmpxchg() implicitly assigns old *ptr value to "old" when CMPXCHG fails. There is no need to re-read the value in the loop. Note that the value from *ptr should be read using READ_ONCE() to prevent the compiler from merging, refetching or reordering the read. No functional change intended. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20230116162522.4072-1-ubizjak@gmail.com
2023-01-10x86/acpi/boot: Do not register processors that cannot be onlined for x2APICKishon Vijay Abraham I
Section 5.2.12.12 Processor Local x2APIC Structure in the ACPI v6.5 spec mandates that both "enabled" and "online capable" Local APIC Flags should be used to determine if the processor is usable or not. However, Linux doesn't use the "online capable" flag for x2APIC to determine if the processor is usable. As a result, cpu_possible_mask has incorrect value and results in more memory getting allocated for per_cpu variables than it is going to be used. Make sure Linux parses both "enabled" and "online capable" flags for x2APIC to correctly determine if the processor is usable. Fixes: aa06e20f1be6 ("x86/ACPI: Don't add CPUs that are not online capable") Reported-by: Leo Duran <leo.duran@amd.com> Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20230105041059.39366-1-kvijayab@amd.com
2022-05-24Merge tag 'pm-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add support for 'artificial' Energy Models in which power numbers for different entities may be in different scales, add support for some new hardware, fix bugs and clean up code in multiple places. Specifics: - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add CPU-based scaling support to passive devfreq governor (Saravana Kannan, Chanwoo Choi). - Update the rk3399_dmc devfreq driver (Brian Norris). - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). - Fix cpufreq governor clean up code to avoid using kfree() directly to free kobject-based items (Kevin Hao). - Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy). - Make intel_pstate notify frequency invariance code when no_turbo is turned on and off (Chen Yu). - Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas Pandruvada). - Make cpufreq avoid unnecessary frequency updates due to mismatch between hardware and the frequency table (Viresh Kumar). - Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify code (Viresh Kumar). - Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the calling convention for some driver callbacks consistent (Rafael Wysocki). - Avoid accessing half-initialized cpufreq policies from the show() and store() sysfs functions (Schspa Shi). - Rearrange cpufreq_offline() to make the calling convention for some driver callbacks consistent (Schspa Shi). - Update CPPC handling in cpufreq (Pierre Gondois). - Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski). - Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf Hansson). - Improve the way genpd deals with its governors (Ulf Hansson). - Update the turbostat utility to version 2022.04.16 (Len Brown, Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)" * tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits) PM: domains: Trust domain-idle-states from DT to be correct by genpd PM: domains: Measure power-on/off latencies in genpd based on a governor PM: domains: Allocate governor data dynamically based on a genpd governor PM: domains: Clean up some code in pm_genpd_init() and genpd_remove() PM: domains: Fix initialization of genpd's next_wakeup PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd PM: domains: Measure suspend/resume latencies in genpd based on governor PM: domains: Move the next_wakeup variable into the struct gpd_timing_data PM: domains: Allocate gpd_timing_data dynamically based on governor PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain() PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd PM: domains: Drop redundant code for genpd always-on governor PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor powercap: intel_rapl: remove redundant store to value after multiply cpufreq: CPPC: Enable dvfs_possible_from_any_cpu cpufreq: CPPC: Enable fast_switch ACPI: CPPC: Assume no transition latency if no PCCT ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported ACPI: CPPC: Check _OSC for flexible address space ...
2022-05-24Merge tag 'acpi-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA kernel code to upstream revision 20220331, improve handling of PCI devices that are in D3cold during system initialization, add support for a few features, fix bugs and clean up code. Specifics: - Update ACPICA code in the kernel to upstream revision 20220331 including the following changes: - Add support for the Windows 11 _OSI string (Mario Limonciello) - Add the CFMWS subtable to the CEDT table (Lawrence Hileman). - iASL: NHLT: Treat Terminator as specific_config (Piotr Maziarz). - iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint Descriptor (Piotr Maziarz). - iASL: NHLT: Rename linux specific strucures to device_info (Piotr Maziarz). - Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob Moore). - Clean up double word in comment (Tom Rix). - Update copyright notices to the year 2022 (Bob Moore). - Remove some tabs and // comments - automated cleanup (Bob Moore). - Replace zero-length array with flexible-array member (Gustavo A. R. Silva). - Interpreter: Add units to time variable names (Paul Menzel). - Add support for ARM Performance Monitoring Unit Table (Besar Wicaksono). - Inform users about ACPI spec violation related to sleep length (Paul Menzel). - iASL/MADT: Add OEM-defined subtable (Bob Moore). - Interpreter: Fix some typo mistakes (Selvarasu Ganesan). - Updates for revision E.d of IORT (Shameer Kolothum). - Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore). - Improve debug messages in the ACPI device PM code (Rafael Wysocki). - Block ASUS B1400CEAE from suspend to idle by default (Mario Limonciello). - Improve handling of PCI devices that are in D3cold during system initialization (Rafael Wysocki). - Fix BERT error region memory mapping (Lorenzo Pieralisi). - Add support for NVIDIA 16550-compatible port subtype to the SPCR parsing code (Jeff Brasen). - Use static for BGRT_SHOW kobj_attribute defines (Tom Rix). - Fix missing prototype warning for acpi_agdi_init() (Ilkka Koskinen). - Fix missing ERST record ID in the APEI code (Liu Xinpeng). - Make APEI error injection to refuse to inject into the zero page (Tony Luck). - Correct description of INT3407 / INT3532 DPTF attributes in sysfs (Sumeet Pawnikar). - Add support for high frequency impedance notification to the DPTF driver (Sumeet Pawnikar). - Make mp_config_acpi_gsi() a void function (Li kunyu). - Unify Package () representation for properties in the ACPI device properties documentation (Andy Shevchenko). - Include UUID in _DSM evaluation warning (Michael Niewöhner)" * tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (41 commits) Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms" ACPI: utils: include UUID in _DSM evaluation warning ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default x86: ACPI: Make mp_config_acpi_gsi() a void function ACPI: DPTF: Add support for high frequency impedance notification ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init() ACPI: bus: Avoid non-ACPI device objects in walks over children ACPI: DPTF: Correct description of INT3407 / INT3532 attributes ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines ACPI, APEI, EINJ: Refuse to inject into the zero page ACPI: PM: Always print final debug message in acpi_device_set_power() ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype ACPI: docs: enumeration: Unify Package () for properties (part 2) ACPI: APEI: Fix missing ERST record id ACPICA: Update version to 20220331 ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output ACPICA: IORT: Updates for revision E.d ACPICA: executer/exsystem: Fix some typo mistakes ACPICA: iASL/MADT: Add OEM-defined subtable ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms ...
2022-05-11x86: ACPI: Make mp_config_acpi_gsi() a void functionLi kunyu
Because the return value of mp_config_acpi_gsi() is not use, change it into a void function. Signed-off-by: Li kunyu <kunyu@nfschina.com> [ rjw: Subject and changelog rewrite ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13x86/ACPI: Preserve ACPI-table override during hibernationAmadeusz Sławiński
When overriding NHLT ACPI-table tests show that on some platforms there is problem that NHLT contains garbage after hibernation/resume cycle. Problem stems from the fact that ACPI override performs early memory allocation using memblock_phys_alloc_range() in memblock_phys_alloc_range(). This memory block is later being marked as ACPI memory block in arch_reserve_mem_area(). Later when memory areas are considered for hibernation it is being marked as nosave in e820__register_nosave_regions(). Fix this by marking ACPI override memory area as ACPI NVS (Non-Volatile-Sleeping), which according to specification needs to be saved on entering S4 and restored when leaving and is implemented as such in kernel. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-07x86/acpi/x86/boot: Add multiprocessor wake-up supportKuppuswamy Sathyanarayanan
Secondary CPU startup is currently performed with something called the "INIT/SIPI protocol". This protocol requires assistance from VMMs to boot guests. As should be a familiar story by now, that support can not be provded to TDX guests because TDX VMMs are not trusted by guests. To remedy this situation a new[1] "Multiprocessor Wakeup Structure" has been added to to an existing ACPI table (MADT). This structure provides the physical address of a "mailbox". A write to the mailbox then steers the secondary CPU to the boot code. Add ACPI MADT wake structure parsing support and wake support. Use this support to wake CPUs whenever it is present instead of INIT/SIPI. While this structure can theoretically be used on 32-bit kernels, there are no 32-bit TDX guest kernels. It has not been tested and can not practically *be* tested on 32-bit. Make it 64-bit only. 1. Details about the new structure can be found in ACPI v6.4, in the "Multiprocessor Wakeup Structure" section. Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220405232939.73860-22-kirill.shutemov@linux.intel.com
2022-03-08ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 boardMark Cilissen
On this board the ACPI RSDP structure points to both a RSDT and an XSDT, but the XSDT points to a truncated FADT. This causes all sorts of trouble and usually a complete failure to boot after the following error occurs: ACPI Error: Unsupported address space: 0x20 (*/hwregs-*) ACPI Error: AE_SUPPORT, Unable to initialize fixed events (*/evevent-*) ACPI: Unable to start ACPI Interpreter This leaves the ACPI implementation in such a broken state that subsequent kernel subsystem initialisations go wrong, resulting in among others mismapped PCI memory, SATA and USB enumeration failures, and freezes. As this is an older embedded platform that will likely never see any BIOS updates to address this issue and its default shipping OS only complies to ACPI 1.0, work around this by forcing `acpi=rsdt`. This patch, applied on top of Linux 5.10.102, was confirmed on real hardware to fix the issue. Signed-off-by: Mark Cilissen <mark@yotsuba.nl> Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-09-13x86/ACPI: Don't add CPUs that are not online capableMario Limonciello
A number of systems are showing "hotplug capable" CPUs when they are not really hotpluggable. This is because the MADT has extra CPU entries to support different CPUs that may be inserted into the socket with different numbers of cores. Starting with ACPI 6.3 the spec has an Online Capable bit in the MADT used to determine whether or not a CPU is hotplug capable when the enabled bit is not set. Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html?#local-apic-flags Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-10x86: Fix typo s/ECLR/ELCR/ for the PIC registerMaciej W. Rozycki
The proper spelling for the acronym referring to the Edge/Level Control Register is ELCR rather than ECLR. Adjust references accordingly. No functional change. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107200251080.9461@angie.orcam.me.uk
2021-08-10x86: Avoid magic number with ELCR register accessesMaciej W. Rozycki
Define PIC_ELCR1 and PIC_ELCR2 macros for accesses to the ELCR registers implemented by many chipsets in their embedded 8259A PIC cores, avoiding magic numbers that are difficult to handle, and complementing the macros we already have for registers originally defined with discrete 8259A PIC implementations. No functional change. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107200237300.9461@angie.orcam.me.uk
2021-05-17x86/acpi: Switch to pr_xxx log functionsHeiner Kallweit
Switching to pr_debug et al has two benefits: - We don't have to add PREFIX to each log statement - Debug output is suppressed except DEBUG is defined or dynamic debugging is enabled for the respective code piece. In addition ensure that longer messages aren't split to multiple lines in source code, checkpatch complains otherwise. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-26Merge tag 'x86_cleanups_for_v5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 cleanups from Borislav Petkov: "Trivial cleanups and fixes all over the place" * tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Remove me from IDE/ATAPI section x86/pat: Do not compile stubbed functions when X86_PAT is off x86/asm: Ensure asm/proto.h can be included stand-alone x86/platform/intel/quark: Fix incorrect kernel-doc comment syntax in files x86/msr: Make locally used functions static x86/cacheinfo: Remove unneeded dead-store initialization x86/process/64: Move cpu_current_top_of_stack out of TSS tools/turbostat: Unmark non-kernel-doc comment x86/syscalls: Fix -Wmissing-prototypes warnings from COND_SYSCALL() x86/fpu/math-emu: Fix function cast warning x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes x86: Fix various typos in comments, take #2 x86: Remove unusual Unicode characters from comments x86/kaslr: Return boolean values from a function returning bool x86: Fix various typos in comments x86/setup: Remove unused RESERVE_BRK_ARRAY() stacktrace: Move documentation for arch_stack_walk_reliable() to header x86: Remove duplicate TSC DEADLINE MSR definitions
2021-03-29ACPI: tables: x86: Reserve memory occupied by ACPI tablesRafael J. Wysocki
The following problem has been reported by George Kennedy: Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy <george.kennedy@oracle.com> Tested-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
2021-03-18x86: Fix various typos in commentsIngo Molnar
Fix ~144 single-word typos in arch/x86/ code comments. Doing this in a single commit should reduce the churn. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-kernel@vger.kernel.org
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-08ACPI, x86/boot: make acpi_nobgrt staticJason Yan
Fix the following sparse warning: arch/x86/kernel/acpi/boot.c:48:5: warning: symbol 'acpi_nobgrt' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14acpi/x86: ignore unspecified bit positions in the ACPI global lock fieldJan Engelhardt
The value in "new" is constructed from "old" such that all bits defined as reserved by the ACPI spec[1] are left untouched. But if those bits do not happen to be all zero, "new < 3" will not evaluate to true. The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with garbage inside the "FACS" ACPI table. The starting value is old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off the reserved bits. [1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14acpi/x86: add a kernel parameter to disable ACPI BGRTAlex Hung
BGRT is for displaying seamless OEM logo from booting to login screen; however, this mechanism does not always work well on all configurations and the OEM logo can be displayed multiple times. This looks worse than without BGRT enabled. This patch adds a kernel parameter to disable BGRT in boot time. This is easier than re-compiling a kernel with CONFIG_ACPI_BGRT disabled. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-19acpi: Ignore acpi_rsdp kernel param when the kernel has been locked downJosh Boyer
This option allows userspace to pass the RSDP address to the kernel, which makes it possible for a user to modify the workings of hardware. Reject the option when the kernel is locked down. This requires some reworking of the existing RSDP command line logic, since the early boot code also makes use of a command-line passed RSDP when locating the SRAT table before the lockdown code has been initialised. This is achieved by separating the command line RSDP path in the early boot code from the generic RSDP path, and then copying the command line RSDP into boot params in the kernel proper if lockdown is not enabled. If lockdown is enabled and an RSDP is provided on the command line, this will only be used when parsing SRAT (which shouldn't permit kernel code execution) and will be ignored in the rest of the kernel. (Modified by Matthew Garrett in order to handle the early boot RSDP environment) Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> cc: Dave Young <dyoung@redhat.com> cc: linux-acpi@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04acpi: Create subtable parsing infrastructureKeith Busch
Parsing entries in an ACPI table had assumed a generic header structure. There is no standard ACPI header, though, so less common layouts with different field sizes required custom parsers to go through their subtable entry list. Create the infrastructure for adding different table types so parsing the entries array may be more reused for all ACPI system tables and the common code doesn't need to be duplicated. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-03x86: Fix various typos in commentsIngo Molnar
Go over arch/x86/ and fix common typos in comments, and a typo in an actual function argument name. No change in functionality intended. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-20x86/acpi, x86/boot: Take RSDP address from boot params if availableJuergen Gross
In case the RSDP address in struct boot_params is specified don't try to find the table by searching, but take the address directly as set by the boot loader. Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: bp@alien8.de Cc: daniel.kiper@oracle.com Cc: sstabellini@kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181120072529.5489-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-20x86/boot: Mostly revert commit ae7e1238e68f2a ("Add ACPI RSDP address to ↵Juergen Gross
setup_header") Peter Anvin pointed out that commit: ae7e1238e68f2a ("x86/boot: Add ACPI RSDP address to setup_header") should be reverted as setup_header should only contain items set by the legacy BIOS. So revert said commit. Instead of fully reverting the dependent commit of: e7b66d16fe4172 ("x86/acpi, x86/boot: Take RSDP address for boot params if available") just remove the setup_header reference in order to replace it by a boot_params in a followup patch. Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: bp@alien8.de Cc: daniel.kiper@oracle.com Cc: sstabellini@kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181120072529.5489-2-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-31memblock: stop using implicit alignment to SMP_CACHE_BYTESMike Rapoport
When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: replace alloc_bootmem with memblock_allocMike Rapoport
The alloc_bootmem(size) is a shortcut for allocation of SMP_CACHE_BYTES aligned memory. When the align parameter of memblock_alloc() is 0, the alignment is implicitly set to SMP_CACHE_BYTES and thus alloc_bootmem(size) and memblock_alloc(size, 0) are equivalent. The conversion is done using the following semantic patch: @@ expression size; @@ - alloc_bootmem(size) + memblock_alloc(size, 0) Link: http://lkml.kernel.org/r/1536927045-23536-22-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-10x86/acpi, x86/boot: Take RSDP address for boot params if availableJuergen Gross
In case the RSDP address in struct boot_params is specified don't try to find the table by searching, but take the address directly as set by the boot loader. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jia Zhang <qianyue.zj@alibaba-inc.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181010061456.22238-4-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-17x86/acpi: Prevent X2APIC id 0xffffffff from being accountedDou Liyang
RongQing reported that there are some X2APIC id 0xffffffff in his machine's ACPI MADT table, which makes the number of possible CPU inaccurate. The reason is that the ACPI X2APIC parser has no sanity check for APIC ID 0xffffffff, which is an invalid id in all APIC types. See "Intel® 64 Architecture x2APIC Specification", Chapter 2.4.1. Add a sanity check to acpi_parse_x2apic() which ignores the invalid id. Reported-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180412014052.25186-1-douly.fnst@cn.fujitsu.com
generated by cgit (git 2.34.1) at 2024-06-13 10:31:10 +0000