| Age | Commit message (Collapse) | Author |
|---|
|
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
APIC detection is currently limited to a few specific Families and will
not match the upcoming Families >=18.
Extend the check to include all Families 6 or greater. Also convert it
to a VFM check to make it simpler.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-2-sohil.mehta@intel.com
|
|
The x86-32 kernel used to support multiple platforms with more than eight
logical CPUs, from the 1999-2003 timeframe: Sequent NUMA-Q, IBM Summit,
Unisys ES7000 and HP F8. Support for all except the latter was dropped
back in 2014, leaving only the F8 based DL740 and DL760 G2 machines in
this catery, with up to eight single-core Socket-603 Xeon-MP processors
with hyperthreading.
Like the already removed machines, the HP F8 servers at the time cost
upwards of $100k in typical configurations, but were quickly obsoleted
by their 64-bit Socket-604 cousins and the AMD Opteron.
Earlier servers with up to 8 Pentium Pro or Xeon processors remain
fully supported as they had no hyperthreading. Similarly, the more
common 4-socket Xeon-MP machines with hyperthreading using Intel
or ServerWorks chipsets continue to work without this, and all the
multi-core Xeon processors also run 64-bit kernels.
While the "bigsmp" support can also be used to run on later 64-bit
machines (including VM guests), it seems best to discourage that
and get any remaining users to update their kernels to 64-bit builds
on these. As a side-effect of this, there is also no more need to
support NUMA configurations on 32-bit x86, as all true 32-bit
NUMA platforms are already gone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-3-arnd@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Miscellaneous x86 cleanups and typo fixes, and also the removal of
the 'disablelapic' boot parameter"
* tag 'x86-cleanups-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Remove a stray tab in the IO-APIC type string
x86/cpufeatures: Remove "AMD" from the comments to the AMD-specific leaf
Documentation/kernel-parameters: Fix a typo in kvm.enable_virt_at_load text
x86/cpu: Fix typo in x86_match_cpu()'s doc
x86/apic: Remove "disablelapic" cmdline option
Documentation: Merge x86-specific boot options doc into kernel-parameters.txt
x86/ioremap: Remove unused size parameter in remapping functions
x86/ioremap: Simplify setup_data mapping variants
x86/boot/compressed: Remove unused header includes from kaslr.c
|
|
The x86_match_cpu() infrastructure can match CPU steppings. Since
there are only 16 possible steppings, the matching infrastructure goes
all out and stores the stepping match as a bitmap. That means it can
match any possible steppings in a single list entry. Fun.
But it exposes this bitmap to each of the X86_MATCH_*() helpers when
none of them really need a bitmap. It makes up for this by exporting a
helper (X86_STEPPINGS()) which converts a contiguous stepping range
into the bitmap which every single user leverages.
Instead of a bitmap, have the main helper for this sort of thing
(X86_MATCH_VFM_STEPS()) just take a stepping range. This ends up
actually being even more compact than before.
Leave the helper in place (renamed to __X86_STEPPINGS()) to make it
more clear what is going on instead of just having a random GENMASK()
in the middle of an already complicated macro.
One oddity that I hit was this macro:
X86_MATCH_VFM_STEPS(vfm, X86_STEPPING_MIN, max_stepping, issues)
It *could* have been converted over to take a min/max stepping value
for each entry. But that would have been a bit too verbose and would
prevent the one oddball in the list (INTEL_COMETLAKE_L stepping 0)
from sticking out.
Instead, just have it take a *maximum* stepping and imply that the match
is from 0=>max_stepping. This is functional for all the cases now and
also retains the nice property of having INTEL_COMETLAKE_L stepping 0
stick out like a sore thumb.
skx_cpuids[] is goofy. It uses the stepping match but encodes all
possible steppings. Just use a normal, non-stepping match helper.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213185129.65527B2A%40davehans-spike.ostc.intel.com
|
|
The convention is "no<something>" and there already is "nolapic". Drop
the disable one.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20241202190011.11979-2-bp@kernel.org
|
|
New processors have become pickier about the local APIC timer state
before entering low power modes. These low power modes are used (for
example) when you close your laptop lid and suspend. If you put your
laptop in a bag and it is not in this low power mode, it is likely
to get quite toasty while it quickly sucks the battery dry.
The problem boils down to some CPUs' inability to power down until the
CPU recognizes that the local APIC timer is shut down. The current
kernel code works in one-shot and periodic modes but does not work for
deadline mode. Deadline mode has been the supported and preferred mode
on Intel CPUs for over a decade and uses an MSR to drive the timer
instead of an APIC register.
Disable the TSC Deadline timer in lapic_timer_shutdown() by writing to
MSR_IA32_TSC_DEADLINE when in TSC-deadline mode. Also avoid writing
to the initial-count register (APIC_TMICT) which is ignored in
TSC-deadline mode.
Note: The APIC_LVTT|=APIC_LVT_MASKED operation should theoretically be
enough to tell the hardware that the timer will not fire in any of the
timer modes. But mitigating AMD erratum 411[1] also requires clearing
out APIC_TMICT. Solely setting APIC_LVT_MASKED is also ineffective in
practice on Intel Lunar Lake systems, which is the motivation for this
change.
1. 411 Processor May Exit Message-Triggered C1E State Without an Interrupt if Local APIC Timer Reaches Zero - https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/revision-guides/41322_10h_Rev_Gd.pdf
Fixes: 279f1461432c ("x86: apic: Use tsc deadline for oneshot when available")
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241015061522.25288-1-rui.zhang%40intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
- Handle an allocation failure in the IO/APIC code gracefully instead
of crashing the machine.
- Remove support for APIC local destination mode on 64bit
Logical destination mode of the local APIC is used for systems with
up to 8 CPUs. It has an advantage over physical destination mode as
it allows to target multiple CPUs at once with IPIs. That advantage
was definitely worth it when systems with up to 8 CPUs were state of
the art for servers and workstations, but that's history.
In the recent past there were quite some reports of new laptops
failing to boot with logical destination mode, but they work fine
with physical destination mode. That's not a suprise because physical
destination mode is guaranteed to work as it's the only way to get a
CPU up and running via the INIT/INIT/STARTUP sequence. Some of the
affected systems were cured by BIOS updates, but not all OEMs provide
them.
As the number of CPUs keep increasing, logical destination mode
becomes less used and the benefit for small systems, like laptops, is
not really worth the trouble. So just remove logical destination mode
support for 64bit and be done with it.
- Code and comment cleanups in the APIC area.
* tag 'x86-apic-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Fix comment on IRQ vector layout
x86/apic: Remove unused extern declarations
x86/apic: Remove logical destination mode for 64-bit
x86/apic: Remove unused inline function apic_set_eoi_cb()
x86/ioapic: Cleanup remaining coding style issues
x86/ioapic: Cleanup line breaks
x86/ioapic: Cleanup bracket usage
x86/ioapic: Cleanup comments
x86/ioapic: Move replace_pin_at_irq_node() to the call site
iommu/vt-d: Cleanup apic_printk()
x86/mpparse: Cleanup apic_printk()s
x86/ioapic: Cleanup guarded debug printk()s
x86/ioapic: Cleanup apic_printk()s
x86/apic: Cleanup apic_printk()s
x86/apic: Provide apic_printk() helpers
x86/ioapic: Use guard() for locking where applicable
x86/ioapic: Cleanup structs
x86/ioapic: Mark mp_alloc_timer_irq() __init
x86/ioapic: Handle allocation failures gracefully
|
|
x2apic_disable() clears x2apic_state and x2apic_mode unconditionally, even
when the state is X2APIC_ON_LOCKED, which prevents the kernel to disable
it thereby creating inconsistent state.
Due to the early state check for X2APIC_ON, the code path which warns about
a locked X2APIC cannot be reached.
Test for state < X2APIC_ON instead and move the clearing of the state and
mode variables to the place which actually disables X2APIC.
[ tglx: Massaged change log. Added Fixes tag. Moved clearing so it's at the
right place for back ports ]
Fixes: a57e456a7b28 ("x86/apic: Fix fallout from x2apic cleanup")
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240813014827.895381-1-yuntao.wang@linux.dev
|
|
Use the new apic_pr_*() helpers and cleanup the apic_printk() maze.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/all/20240802155440.589821068@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC update from Dave Hansen:
"Coccinelle complained about some 64-bit divisions, but the divisor was
really just a 32-bit value being stored as 'unsigned long'.
Fixing the types fixes the warning"
* tag 'x86_apic_for_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Improve data types to fix Coccinelle warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar:
- Rework the x86 CPU vendor/family/model code: introduce the 'VFM'
value that is an 8+8+8 bit concatenation of the vendor/family/model
value, and add macros that work on VFM values. This simplifies the
addition of new Intel models & families, and simplifies existing
enumeration & quirk code.
- Add support for the AMD 0x80000026 leaf, to better parse topology
information
- Optimize the NUMA allocation layout of more per-CPU data structures
- Improve the workaround for AMD erratum 1386
- Clear TME from /proc/cpuinfo as well, when disabled by the firmware
- Improve x86 self-tests
- Extend the mce_record tracepoint with the ::ppin and ::microcode fields
- Implement recovery for MCE errors in TDX/SEAM non-root mode
- Misc cleanups and fixes
* tag 'x86-cpu-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
x86/mm: Switch to new Intel CPU model defines
x86/tsc_msr: Switch to new Intel CPU model defines
x86/tsc: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
x86/resctrl: Switch to new Intel CPU model defines
x86/microcode/intel: Switch to new Intel CPU model defines
x86/mce: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
x86/cpu/intel_epb: Switch to new Intel CPU model defines
x86/aperfmperf: Switch to new Intel CPU model defines
x86/apic: Switch to new Intel CPU model defines
perf/x86/msr: Switch to new Intel CPU model defines
perf/x86/intel/uncore: Switch to new Intel CPU model defines
perf/x86/intel/pt: Switch to new Intel CPU model defines
perf/x86/lbr: Switch to new Intel CPU model defines
perf/x86/intel/cstate: Switch to new Intel CPU model defines
x86/bugs: Switch to new Intel CPU model defines
x86/bugs: Switch to new Intel CPU model defines
x86/cpu/vfm: Update arch/x86/include/asm/intel-family.h
x86/cpu/vfm: Add new macros to work with (vendor/family/model) values
...
|
|
With 'iommu=off' on the kernel command line and x2APIC enabled by the BIOS
the code which disables the x2APIC triggers an unchecked MSR access error:
RDMSR from 0x802 at rIP: 0xffffffff94079992 (native_apic_msr_read+0x12/0x50)
This is happens because default_acpi_madt_oem_check() selects an x2APIC
driver before the x2APIC is disabled.
When the x2APIC is disabled because interrupt remapping cannot be enabled
due to 'iommu=off' on the command line, x2apic_disable() invokes
apic_set_fixmap() which in turn tries to read the APIC ID. This triggers
the MSR warning because x2APIC is disabled, but the APIC driver is still
x2APIC based.
Prevent that by adding an argument to apic_set_fixmap() which makes the
APIC ID read out conditional and set it to false from the x2APIC disable
path. That's correct as the APIC ID has already been read out during early
discovery.
Fixes: d10a904435fa ("x86/apic: Consolidate boot_cpu_physical_apicid initialization sites")
Reported-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/875xw5t6r7.ffs@tglx
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181504.41634-1-tony.luck%40intel.com
|
|
So we are using the 'ia32_cap' value in a number of places,
which got its name from MSR_IA32_ARCH_CAPABILITIES MSR register.
But there's very little 'IA32' about it - this isn't 32-bit only
code, nor does it originate from there, it's just a historic
quirk that many Intel MSR names are prefixed with IA32_.
This is already clear from the helper method around the MSR:
x86_read_arch_cap_msr(), which doesn't have the IA32 prefix.
So rename 'ia32_cap' to 'x86_arch_cap_msr' to be consistent with
its role and with the naming of the helper function.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/9592a18a814368e75f8f4b9d74d3883aa4fd1eaf.1712813475.git.jpoimboe@kernel.org
|
|
Given that acpi_pm_read_early() returns a u32 (masked to 24 bits), several
variables that store its return value are improved by adjusting their data
types from unsigned long to u32. Specifically, change deltapm's type from
long to u32 because its value fits into 32 bits and it cannot be negative.
These data type improvements resolve the following two Coccinelle/
coccicheck warnings reported by do_div.cocci:
arch/x86/kernel/apic/apic.c:734:1-7: WARNING: do_div() does a 64-by-32
division, please consider using div64_long instead.
arch/x86/kernel/apic/apic.c:742:2-8: WARNING: do_div() does a 64-by-32
division, please consider using div64_long instead.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240318104721.117741-3-thorsten.blum%40toblux.com
|
|
Now that all external fiddling with num_processors and disabled_cpus is
gone, move the last user prefill_possible_map() into the topology code too
and remove the global visibility of these variables.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210251.994756960@linutronix.de
|
|
The APIC/CPU registration sits in the middle of the APIC code. In fact this
is a topology evaluation function and has nothing to do with the inner
workings of the local APIC.
Move it out into a file which reflects what this is about.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210251.543948812@linutronix.de
|
|
The ACPI ID for CPUs is preset with U32_MAX which is completely non
obvious. Use a proper define for it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154640.177504138@linutronix.de
|
|
Paranoia is not wrong, but having an APIC callback which is in most
implementations a complete NOOP and in one actually looking whether the
APICID of an upcoming CPU has been registered. The same APICID which was
used to bring the CPU out of wait for startup.
That's paranoia for the paranoia sake. Remove the voodoo.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154640.116510935@linutronix.de
|
|
There is absolutely no point to write the APIC ID which was read from the
local APIC earlier, back into the local APIC for the 64-bit UP case.
Remove that along with the apic callback which is solely there for this
pointless exercise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154640.055288922@linutronix.de
|
|
physid_t is a wrapper around bitmap. Just remove the onion layer and use
bitmap functionality directly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.994904510@linutronix.de
|
|
There is no point for this function. The only case where this is used is
when there is no XAPIC available, which means the broadcast address is 0xF.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.057209154@linutronix.de
|
|
Fix typos, most reported by "codespell arch/x86". Only touches comments,
no code changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240103004011.1758650-1-helgaas@kernel.org
|
|
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width and fixup the most obvious usage sites of that.
The APIC callbacks will be addressed separately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.922905727@linutronix.de
|
|
APIC ID checks compare with BAD_APICID all over the place, but some
initializers and some code which fiddles with global data structure use
-1[U] instead. That simply cannot work at all.
Fix it up and use BAD_APICID consistently all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.862835121@linutronix.de
|
|
The SMT control mechanism got added as speculation attack vector
mitigation. The implemented logic relies on the primary thread mask to
be set up properly.
This turns out to be an issue with XEN/PV guests because their CPU hotplug
mechanics do not enumerate APICs and therefore the mask is never correctly
populated.
This went unnoticed so far because by chance XEN/PV ends up with
smp_num_siblings == 2. So cpu_smt_control stays at its default value
CPU_SMT_ENABLED and the primary thread mask is never evaluated in the
context of CPU hotplug.
This stopped "working" with the upcoming overhaul of the topology
evaluation which legitimately provides a fake topology for XEN/PV. That
sets smp_num_siblings to 1, which causes the core CPU hot-plug core to
refuse to bring up the APs.
This happens because cpu_smt_control is set to CPU_SMT_NOT_SUPPORTED which
causes cpu_bootable() to evaluate the unpopulated primary thread mask with
the conclusion that all non-boot CPUs are not valid to be plugged.
The core code has already been made more robust against this kind of fail,
but the primary thread mask really wants to be populated to avoid other
issues all over the place.
Just fake the mask by pretending that all XEN/PV vCPUs are primary threads,
which is consistent because all of XEN/PVs topology is fake or non-existent.
Fixes: 6a4d2657e048 ("x86/smp: Provide topology_is_primary_thread()")
Fixes: f54d4434c281 ("x86/apic: Provide cpu_primary_thread mask")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.210011520@linutronix.de
|
|
Move them to one place so the static call conversion gets simpler.
No functional change.
[ dhansen: merge against recent x86/apic changes ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
In preparation for converting the hotpath APIC callbacks to static keys,
provide common initialization infrastructure.
Lift apic_install_drivers() from probe_64.c and convert all places which
switch the apic instance by storing the pointer to use apic_install_driver()
as a first step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Yet another wrapper of a wrapper gone along with the outdated comment
that this compiles to a single instruction.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Every callsite hands in the same constants which is a pointless exercise
and cannot be optimized by the compiler due to the indirect calls.
Use the constants in the eoi() callbacks and remove the arguments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Move it next to apic_mem_wait_icr_idle(), rename it so that it's clear what
it does and rewrite it in readable form.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Two copies and also needlessly public. Move it into ipi.c so it can be
inlined. Rename it to apic_mem_wait_icr_idle().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Really not a hotpath and again no reason for having a gazillion of empty
callbacks returning 1. Make it return bool and provide one shared
implementation for the remaining users.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
default_setup_apic_routing() is a complete misnomer. On 64bit it does the
actual APIC probing and on 32bit it is used to force select the bigsmp APIC
and to emit a redundant message in the apic::setup_apic_routing() callback.
Rename the 64bit and 32bit function so they reflect what they are doing and
remove the useless APIC callback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
apic::init_apic_ldr() is only invoked when the APIC is initialized. So
there is really no point in having:
- Default empty callbacks all over the place
- Two implementations of the actual LDR init function where one is
just unreadable gunk but does exactly the same as the other.
Make the apic::init_apic_ldr() invocation conditional, remove the empty
callbacks and consolidate the two implementation into one.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
If the system has more than 8 CPUs then XAPIC and the bigsmp APIC driver is
required. This is ensured via:
1) Enumerating all possible CPUs up to NR_CPUS
2) Checking at boot CPU APIC setup time whether the system has more than
8 CPUs and has an XAPIC.
If that's the case then it's attempted to install the bigsmp APIC
driver and a magic variable 'def_to_bigsmp' is set to one.
3) If that magic variable is set and CONFIG_X86_BIGSMP=n and the system
has more than 8 CPUs smp_sanity_check() removes all CPUs >= #8 from
the present and possible mask in the most convoluted way.
This logic is completely broken for the case where the bigsmp driver is
enabled, but not selected due to a command line option specifying the
default APIC. In that case the system boots with default APIC in logical
destination mode and fails to reduce the number of CPUs.
That aside the above which is sprinkled over 3 different places is yet
another piece of art.
It would have been too obvious to check the requirements upfront and limit
nr_cpu_ids _before_ enumerating tons of CPUs and then removing them again.
Implement exactly this. Check the bigsmp requirement when the boot APIC is
registered which happens _before_ ACPI/MPTABLE parsing and limit the number
of CPUs to 8 if it can't be used. Switch it over when the boot CPU apic is
set up if necessary.
[ dhansen: fix nr_cpu_ids off-by-one in default_setup_apic_routing() ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
This per CPU variable is just yet another form of voodoo programming. The
boot ordering is:
per_cpu(x86_cpu_to_logical_apicid, cpu) = 1U << cpu;
.....
setup_apic()
apic->init_apic_ldr()
default_init_apic_ldr()
apic_write(SET_APIC_LOGICAL_ID(1UL << smp_processor_id(), APIC_LDR);
id = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR);
WARN_ON(id != per_cpu(x86_cpu_to_logical_apicid, cpu));
per_cpu(x86_cpu_to_logical_apicid, cpu) = id;
So first write the default into LDR and then validate it against the same default
which was set up during early boot APIC enumeration.
Brilliant, isn't it?
The comment above the per CPU variable declaration describes it well:
'Let's keep it ugly for now.'
Remove the useless gunk and use '1U << cpu' consistently all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
apic::x86_32_early_logical_apicid() is yet another historical joke.
It is used to preset the x86_cpu_to_logical_apicid per CPU variable during
APIC enumeration with:
- 1 shifted left by the CPU number
- the physical APIC ID in case of bigsmp
The latter is hillarious because bigsmp uses physical destination mode
which never can use the logical APIC ID.
It gets even worse. As bigsmp can be enforced late in the boot process the
probe function overwrites the per CPU variable which is never used for this
APIC type once again.
Remove that gunk and store 1 << cpunr unconditionally if and only if the
CPU number is less than 8, because the default logical destination mode
only allows up to 8 CPUs.
This is just an intermediate step before removing the per CPU insanity
completely. Stay tuned.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
No need for an extra variable to find out whether the APIC has been mapped
or is accessible (X2APIC mode).
Provide an inline for this and check apic_mmio_base which is only set when
the local APIC has been mapped.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
num_processors is 0 by default and only gets incremented when local APICs
are registered.
Make init_apic_mappings(), which tries to enable the local APIC in the case
that no SMP configuration was found set num_processors to 1.
This allows to remove yet another check for the local APIC and yet another
place which registers the boot CPUs local APIC ID.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Convert places which just write mp_lapic_addr and let them register the
local APIC address directly instead of relying on magic other code to do
so.
Add a WARN_ON() into register_lapic_address() which is raised when
register_lapic_address() is invoked more than once during boot.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Split the fixmap setup out of register_lapic_address() and reuse it when
the X2APIC is disabled during setup.
This avoids registering the APIC ID (setting 'mp_lapic_addr') twice.
[ dhansen: changelog wording tweak ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Quite some APIC init functions are pure boolean, but use the success = 0,
fail < 0 model. That's confusing as hell when reading through the code.
Convert them to boolean.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
This historical leftover is really uninteresting today. Whatever MPTABLE or
MADT delivers we only trust the hardware anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Register the boot CPU APIC right when the boot CPUs APIC is read from the
hardware. No point is doing this on random places and having wild
heuristics to save the boot CPU APIC ID slot and CPU number 0 reserved.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
boot_cpu_physical_apicid is written in random places and in the last
consequence filled with the APIC ID read from the local APIC. That causes
it to have inconsistent state when the MPTABLE is broken. As a consequence
tons of moronic checks are sprinkled all over the place.
Consolidate the code and read it exactly once when either X2APIC mode is
detected early or when the APIC mapping is established.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
max_physical_apicid is assigned but never read.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
