summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
AgeCommit message (Collapse)Author
2018-01-18x86/intel_rdt: Enable L2 CDP in MSR IA32_L2_QOS_CFGFenghua Yu
Bit 0 in MSR IA32_L2_QOS_CFG (0xc82) is L2 CDP enable bit. By default, the bit is zero, i.e. L2 CAT is enabled, and L2 CDP is disabled. When the resctrl mount parameter "cdpl2" is given, the bit is set to 1 and L2 CDP is enabled. In L2 CDP mode, the L2 CAT mask MSRs are re-mapped into interleaved pairs of mask MSRs for code (referenced by an odd CLOSID) and data (referenced by an even CLOSID). Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: Vikas" <vikas.shivappa@intel.com> Cc: Sai Praneeth" <sai.praneeth.prakhya@intel.com> Cc: Reinette" <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/1513810644-78015-6-git-send-email-fenghua.yu@intel.com
2017-10-21x86/intel_rdt: Fix potential deadlock during resctrl mountReinette Chatre
Sai reported a warning during some MBA tests: [ 236.755559] ====================================================== [ 236.762443] WARNING: possible circular locking dependency detected [ 236.769328] 4.14.0-rc4-yocto-standard #8 Not tainted [ 236.774857] ------------------------------------------------------ [ 236.781738] mount/10091 is trying to acquire lock: [ 236.787071] (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8117f892>] static_key_enable+0x12/0x30 [ 236.797058] but task is already holding lock: [ 236.803552] (&type->s_umount_key#37/1){+.+.}, at: [<ffffffff81208b2f>] sget_userns+0x32f/0x520 [ 236.813247] which lock already depends on the new lock. [ 236.822353] the existing dependency chain (in reverse order) is: [ 236.830686] -> #4 (&type->s_umount_key#37/1){+.+.}: [ 236.837756] __lock_acquire+0x1100/0x11a0 [ 236.842799] lock_acquire+0xdf/0x1d0 [ 236.847363] down_write_nested+0x46/0x80 [ 236.852310] sget_userns+0x32f/0x520 [ 236.856873] kernfs_mount_ns+0x7e/0x1f0 [ 236.861728] rdt_mount+0x30c/0x440 [ 236.866096] mount_fs+0x38/0x150 [ 236.870262] vfs_kern_mount+0x67/0x150 [ 236.875015] do_mount+0x1df/0xd50 [ 236.879286] SyS_mount+0x95/0xe0 [ 236.883464] entry_SYSCALL_64_fastpath+0x18/0xad [ 236.889183] -> #3 (rdtgroup_mutex){+.+.}: [ 236.895292] __lock_acquire+0x1100/0x11a0 [ 236.900337] lock_acquire+0xdf/0x1d0 [ 236.904899] __mutex_lock+0x80/0x8f0 [ 236.909459] mutex_lock_nested+0x1b/0x20 [ 236.914407] intel_rdt_online_cpu+0x3b/0x4a0 [ 236.919745] cpuhp_invoke_callback+0xce/0xb80 [ 236.925177] cpuhp_thread_fun+0x1c5/0x230 [ 236.930222] smpboot_thread_fn+0x11a/0x1e0 [ 236.935362] kthread+0x152/0x190 [ 236.939536] ret_from_fork+0x27/0x40 [ 236.944097] -> #2 (cpuhp_state-up){+.+.}: [ 236.950199] __lock_acquire+0x1100/0x11a0 [ 236.955241] lock_acquire+0xdf/0x1d0 [ 236.959800] cpuhp_issue_call+0x12e/0x1c0 [ 236.964845] __cpuhp_setup_state_cpuslocked+0x13b/0x2f0 [ 236.971242] __cpuhp_setup_state+0xa7/0x120 [ 236.976483] page_writeback_init+0x43/0x67 [ 236.981623] pagecache_init+0x38/0x3b [ 236.986281] start_kernel+0x3c6/0x41a [ 236.990931] x86_64_start_reservations+0x2a/0x2c [ 236.996650] x86_64_start_kernel+0x72/0x75 [ 237.001793] verify_cpu+0x0/0xfb [ 237.005966] -> #1 (cpuhp_state_mutex){+.+.}: [ 237.012364] __lock_acquire+0x1100/0x11a0 [ 237.017408] lock_acquire+0xdf/0x1d0 [ 237.021969] __mutex_lock+0x80/0x8f0 [ 237.026527] mutex_lock_nested+0x1b/0x20 [ 237.031475] __cpuhp_setup_state_cpuslocked+0x54/0x2f0 [ 237.037777] __cpuhp_setup_state+0xa7/0x120 [ 237.043013] page_alloc_init+0x28/0x30 [ 237.047769] start_kernel+0x148/0x41a [ 237.052425] x86_64_start_reservations+0x2a/0x2c [ 237.058145] x86_64_start_kernel+0x72/0x75 [ 237.063284] verify_cpu+0x0/0xfb [ 237.067456] -> #0 (cpu_hotplug_lock.rw_sem){++++}: [ 237.074436] check_prev_add+0x401/0x800 [ 237.079286] __lock_acquire+0x1100/0x11a0 [ 237.084330] lock_acquire+0xdf/0x1d0 [ 237.088890] cpus_read_lock+0x42/0x90 [ 237.093548] static_key_enable+0x12/0x30 [ 237.098496] rdt_mount+0x406/0x440 [ 237.102862] mount_fs+0x38/0x150 [ 237.107035] vfs_kern_mount+0x67/0x150 [ 237.111787] do_mount+0x1df/0xd50 [ 237.116058] SyS_mount+0x95/0xe0 [ 237.120233] entry_SYSCALL_64_fastpath+0x18/0xad [ 237.125952] other info that might help us debug this: [ 237.134867] Chain exists of: cpu_hotplug_lock.rw_sem --> rdtgroup_mutex --> &type->s_umount_key#37/1 [ 237.148425] Possible unsafe locking scenario: [ 237.155015] CPU0 CPU1 [ 237.160057] ---- ---- [ 237.165100] lock(&type->s_umount_key#37/1); [ 237.169952] lock(rdtgroup_mutex); [ 237.176641] lock(&type->s_umount_key#37/1); [ 237.184287] lock(cpu_hotplug_lock.rw_sem); [ 237.189041] *** DEADLOCK *** When the resctrl filesystem is mounted the locks must be acquired in the same order as was done when the cpus came online: cpu_hotplug_lock before rdtgroup_mutex. This also requires to switch the static_branch_enable() calls to the _cpulocked variant because now cpu hotplug lock is held already. [ tglx: Switched to cpus_read_[un]lock ] Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Acked-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Link: https://lkml.kernel.org/r/9c41b91bc2f47d9e95b62b213ecdb45623c47a9f.1508490116.git.reinette.chatre@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-10-21x86/intel_rdt: Fix potential deadlock during resctrl unmountReinette Chatre
Lockdep warns about a potential deadlock: [ 66.782842] ====================================================== [ 66.782888] WARNING: possible circular locking dependency detected [ 66.782937] 4.14.0-rc2-test-test+ #48 Not tainted [ 66.782983] ------------------------------------------------------ [ 66.783052] umount/336 is trying to acquire lock: [ 66.783117] (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff81032395>] rdt_kill_sb+0x215/0x390 [ 66.783193] but task is already holding lock: [ 66.783244] (rdtgroup_mutex){+.+.}, at: [<ffffffff810321b6>] rdt_kill_sb+0x36/0x390 [ 66.783305] which lock already depends on the new lock. [ 66.783364] the existing dependency chain (in reverse order) is: [ 66.783419] -> #3 (rdtgroup_mutex){+.+.}: [ 66.783467] __lock_acquire+0x1293/0x13f0 [ 66.783509] lock_acquire+0xaf/0x220 [ 66.783543] __mutex_lock+0x71/0x9b0 [ 66.783575] mutex_lock_nested+0x1b/0x20 [ 66.783610] intel_rdt_online_cpu+0x3b/0x430 [ 66.783649] cpuhp_invoke_callback+0xab/0x8e0 [ 66.783687] cpuhp_thread_fun+0x7a/0x150 [ 66.783722] smpboot_thread_fn+0x1cc/0x270 [ 66.783764] kthread+0x16e/0x190 [ 66.783794] ret_from_fork+0x27/0x40 [ 66.783825] -> #2 (cpuhp_state){+.+.}: [ 66.783870] __lock_acquire+0x1293/0x13f0 [ 66.783906] lock_acquire+0xaf/0x220 [ 66.783938] cpuhp_issue_call+0x102/0x170 [ 66.783974] __cpuhp_setup_state_cpuslocked+0x154/0x2a0 [ 66.784023] __cpuhp_setup_state+0xc7/0x170 [ 66.784061] page_writeback_init+0x43/0x67 [ 66.784097] pagecache_init+0x43/0x4a [ 66.784131] start_kernel+0x3ad/0x3f7 [ 66.784165] x86_64_start_reservations+0x2a/0x2c [ 66.784204] x86_64_start_kernel+0x72/0x75 [ 66.784241] verify_cpu+0x0/0xfb [ 66.784270] -> #1 (cpuhp_state_mutex){+.+.}: [ 66.784319] __lock_acquire+0x1293/0x13f0 [ 66.784355] lock_acquire+0xaf/0x220 [ 66.784387] __mutex_lock+0x71/0x9b0 [ 66.784419] mutex_lock_nested+0x1b/0x20 [ 66.784454] __cpuhp_setup_state_cpuslocked+0x52/0x2a0 [ 66.784497] __cpuhp_setup_state+0xc7/0x170 [ 66.784535] page_alloc_init+0x28/0x30 [ 66.784569] start_kernel+0x148/0x3f7 [ 66.784602] x86_64_start_reservations+0x2a/0x2c [ 66.784642] x86_64_start_kernel+0x72/0x75 [ 66.784678] verify_cpu+0x0/0xfb [ 66.784707] -> #0 (cpu_hotplug_lock.rw_sem){++++}: [ 66.784759] check_prev_add+0x32f/0x6e0 [ 66.784794] __lock_acquire+0x1293/0x13f0 [ 66.784830] lock_acquire+0xaf/0x220 [ 66.784863] cpus_read_lock+0x3d/0xb0 [ 66.784896] rdt_kill_sb+0x215/0x390 [ 66.784930] deactivate_locked_super+0x3e/0x70 [ 66.784968] deactivate_super+0x40/0x60 [ 66.785003] cleanup_mnt+0x3f/0x80 [ 66.785034] __cleanup_mnt+0x12/0x20 [ 66.785070] task_work_run+0x8b/0xc0 [ 66.785103] exit_to_usermode_loop+0x94/0xa0 [ 66.786804] syscall_return_slowpath+0xe8/0x150 [ 66.788502] entry_SYSCALL_64_fastpath+0xab/0xad [ 66.790194] other info that might help us debug this: [ 66.795139] Chain exists of: cpu_hotplug_lock.rw_sem --> cpuhp_state --> rdtgroup_mutex [ 66.800035] Possible unsafe locking scenario: [ 66.803267] CPU0 CPU1 [ 66.804867] ---- ---- [ 66.806443] lock(rdtgroup_mutex); [ 66.808002] lock(cpuhp_state); [ 66.809565] lock(rdtgroup_mutex); [ 66.811110] lock(cpu_hotplug_lock.rw_sem); [ 66.812608] *** DEADLOCK *** [ 66.816983] 2 locks held by umount/336: [ 66.818418] #0: (&type->s_umount_key#35){+.+.}, at: [<ffffffff81229738>] deactivate_super+0x38/0x60 [ 66.819922] #1: (rdtgroup_mutex){+.+.}, at: [<ffffffff810321b6>] rdt_kill_sb+0x36/0x390 When the resctrl filesystem is unmounted the locks should be obtain in the locks in the same order as was done when the cpus came online: cpu_hotplug_lock before rdtgroup_mutex. This also requires to switch the static_branch_disable() calls to the _cpulocked variant because now cpu hotplug lock is held already. [ tglx: Switched to cpus_read_[un]lock ] Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Acked-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/cc292e76be073f7260604651711c47b09fd0dc81.1508490116.git.reinette.chatre@intel.com
2017-10-05x86/intel_rdt: Remove redundant assignmentJithu Joseph
The assignment to the 'files' variable is immediately overwritten in the following line. Remove the older assignment, which was meant specifially for creating control groups files. Fixes: c7d9aac61311 ("x86/intel_rdt/cqm: Add mkdir support for RDT monitoring") Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Cc: tony.luck@intel.com Cc: vikas.shivappa@intel.com Link: https://lkml.kernel.org/r/1507157337-18118-1-git-send-email-jithu.joseph@intel.com
2017-09-27x86/intel_rdt: Add diagnostics when making directoriesTony Luck
Mostly this is about running out of RMIDs or CLOSIDs. Other errors are various internal errors. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vikas Shivappa <vikas.shivappa@intel.com> Cc: Boris Petkov <bp@suse.de> Cc: Reinette Chatre <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/027cf1ffb3a3695f2d54525813a1d644887353cf.1506382469.git.tony.luck@intel.com
2017-09-27x86/intel_rdt: Add diagnostics when writing the cpus fileTony Luck
Can't add a cpu to a monitor group unless it belongs to parent group. Can't delete cpus from the default group. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vikas Shivappa <vikas.shivappa@intel.com> Cc: Boris Petkov <bp@suse.de> Cc: Reinette Chatre <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/757a869a25e9fc1b7a2e9bc43e1159455c1964a0.1506382469.git.tony.luck@intel.com
2017-09-27x86/intel_rdt: Add diagnostics when writing the tasks fileTony Luck
About the only tricky case is trying to move a task into a monitor group that is a subdirectory of a different control group. But cover the simple cases too. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vikas Shivappa <vikas.shivappa@intel.com> Cc: Boris Petkov <bp@suse.de> Cc: Reinette Chatre <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/f1841cce6a242aed37cb926dee8942727331bf78.1506382469.git.tony.luck@intel.com
2017-09-27x86/intel_rdt: Add framework for better RDT UI diagnosticsTony Luck
Commands are given to the resctrl file system by making/removing directories, or by writing to files. When something goes wrong the user is generally left wondering why they got: bash: echo: write error: Invalid argument Add a new file "last_cmd_status" to the "info" directory that will give the user some better clues on what went wrong. Provide functions to clear and update last_cmd_status which check that we hold the rdtgroup_mutex. [ tglx: Made last_cmd_status static and folded back the hunk from patch 3 which replaces the open coded access to last_cmd_status with the accessor function ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vikas Shivappa <vikas.shivappa@intel.com> Cc: Boris Petkov <bp@suse.de> Cc: Reinette Chatre <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/edc4e0e9741eee89bba569f0021b1b2662fd9508.1506382469.git.tony.luck@intel.com
2017-08-16x86/intel_rdt: Remove redundant ternary operator on returnColin Ian King
The use of the ternary operator is redundant as ret can never be non-zero at that point. Instead, just return nbytes. Detected by CoverityScan, CID#1452658 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: kernel-janitors@vger.kernel.org Link: http://lkml.kernel.org/r/20170808092859.13021-1-colin.king@canonical.com
2017-08-16x86/intel_rdt/mbm: Fix MBM overflow handler during CPU hotplugVikas Shivappa
When a CPU is dying, the overflow worker is canceled and rescheduled on a different CPU in the same domain. But if the timer is already about to expire this essentially doubles the interval which might result in a non detected overflow. Cancel the overflow worker and reschedule it immediately on a different CPU in same domain. The work could be flushed as well, but that would reschedule it on the same CPU. [ tglx: Rewrote changelog once again ] Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Link: http://lkml.kernel.org/r/1502845243-20454-2-git-send-email-vikas.shivappa@linux.intel.com
2017-08-14x86/intel_rdt: Modify the intel_pqr_state for better performanceVikas Shivappa
Currently we have pqr_state and rdt_default_state which store the cached CLOSID/RMIDs and the user configured cpu default values respectively. We touch both of these during context switch. Put all of them in one structure so that we can spare a cache line. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: sai.praneeth.prakhya@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Link: http://lkml.kernel.org/r/1502304395-7166-3-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt: Show bitmask of shareable resource with other executing unitsFenghua Yu
CPUID.(EAX=0x10, ECX=res#):EBX[31:0] reports a bit mask for a resource. Each set bit within the length of the CBM indicates the corresponding unit of the resource allocation may be used by other entities in the platform (e.g. an integrated graphics engine or hardware units outside the processor core and have direct access to the resource). Each cleared bit within the length of the CBM indicates the corresponding allocation unit can be configured to implement a priority-based allocation scheme without interference with other hardware agents in the system. Bits outside the length of the CBM are reserved. More details on the bit mask are described in x86 Software Developer's Manual. The bitmask is shown in "info" directory for each resource. It's up to user to decide how to use the bitmask within a CBM in a partition to share or isolate a resource with other executing units. Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: vikas.shivappa@linux.intel.com Link: http://lkml.kernel.org/r/20170725223904.12996-1-tony.luck@intel.com
2017-08-01x86/intel_rdt/mbm: Handle counter overflowVikas Shivappa
Set up a delayed work queue for each domain that will read all the MBM counters of active RMIDs once per second to make sure that they don't wrap around between reads from users. [Tony: Added the initializations for the work structure and completed the patch] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-29-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt/mbm: Add mbm counter initializationVikas Shivappa
MBM counters are monotonically increasing counts representing the total memory bytes at a particular time. In order to calculate total_bytes for an rdtgroup, we store the value of the counter when we create an rdtgroup or when a new domain comes online. When the total_bytes(all memory controller bytes) or local_bytes(local memory controller bytes) file in "mon_data" is read it shows the total bytes for that rdtgroup since its creation. User can snapshot this at different time intervals to obtain bytes/second. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-28-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt/cqm: Add CPU hotplug supportVikas Shivappa
Resource groups have a per domain directory under "mon_data". Add or remove these directories as and when domains come online and go offline. Also update the per cpu rmids and cache upon onlining and offlining cpus. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-26-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt/cqm: Add mount,umount supportVikas Shivappa
Add monitoring support during mount and unmount. Since root directory is a "ctrl_mon" directory which can control and monitor resources create the "mon_groups" directory which can hold monitor groups and a "mon_data" directory which would hold all monitoring data like the rest of resource groups. The mount succeeds if either of monitoring or control/allocation is enabled. If only monitoring is enabled user can still create monitor groups under the "/sys/fs/resctrl/mon_groups/" and any mkdir under root would fail. If only control/allocation is enabled all of the monitoring related directories/files would not exist and resctrl would work in legacy mode. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-23-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt/cqm: Add rmdir supportVikas Shivappa
Resource groups (ctrl_mon and monitor groups) are represented by directories in resctrl fs. Add support to remove the directories. When a ctrl_mon directory is removed all the cpus and tasks are assigned back to the root rdtgroup. When a monitor group is removed the cpus and tasks are returned to the parent control group. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-22-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt: Separate the ctrl bits from rmdirVikas Shivappa
Re-factor the code to separate the ctrl group removal from the rmdir to prepare to add RDT monitoring group removal. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-21-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt/cqm: Add mon_dataVikas Shivappa
Add a mon_data directory for the root rdtgroup and all other rdtgroups. The directory holds all of the monitored data for all domains and events of all resources being monitored. The mon_data itself has a list of directories in the format mon_<domain_name>_<domain_id>. Each of these subdirectories contain one file per event in the mode "0444". Reading the file displays a snapshot of the monitored data for the event the file represents. For ex, on a 2 socket Broadwell with llc_occupancy being monitored the mon_data contents look as below: $ ls /sys/fs/resctrl/p1/mon_data/ mon_L3_00 mon_L3_01 Each domain directory has one file per event: $ ls /sys/fs/resctrl/p1/mon_data/mon_L3_00/ llc_occupancy To read current llc_occupancy of ctrl_mon group p1 $ cat /sys/fs/resctrl/p1/mon_data/mon_L3_00/llc_occupancy 33789096 [This patch idea is based on Tony's sample patches to organise data in a per domain directory and have one file per event (and use the fp->priv to store mon data bits)] Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-20-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt/cqm: Add cpus file supportVikas Shivappa
The cpus file is extended to support resource monitoring. This is used to over-ride the RMID of the default group when running on specific CPUs. It works similar to the resource control. The "cpus" and "cpus_list" file is present in default group, ctrl_mon groups and monitor groups. Each "cpus" file or cpu_list file reads a cpumask or list showing which CPUs belong to the resource group. By default all online cpus belong to the default root group. A CPU can be present in one "ctrl_mon" and one "monitor" group simultaneously. They can be added to a resource group by writing the CPU to the file. When a CPU is added to a ctrl_mon group it is automatically removed from the previous ctrl_mon group. A CPU can be added to a monitor group only if it is present in the parent ctrl_mon group and when a CPU is added to a monitor group, it is automatically removed from the previous monitor group. When CPUs go offline, they are automatically removed from the ctrl_mon and monitor groups. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-18-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt: Prepare to add RDT monitor cpus file supportVikas Shivappa
Separate the ctrl cpus file handling from the generic cpus file handling and convert the per cpu closid from u32 to a struct which will be used later to add rmid to the same struct. Also cleanup some name space. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-17-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt/cqm: Add tasks file supportVikas Shivappa
The root directory, ctrl_mon and monitor groups are populated with a read/write file named "tasks". When read, it shows all the task IDs assigned to the resource group. Tasks can be added to groups by writing the PID to the file. A task can be present in one "ctrl_mon" group "and" one "monitor" group. IOW a PID_x can be seen in a ctrl_mon group and a monitor group at the same time. When a task is added to a ctrl_mon group, it is automatically removed from the previous ctrl_mon group where it belonged. Similarly if a task is moved to a monitor group it is removed from the previous monitor group . Also since the monitor groups can only have subset of tasks of parent ctrl_mon group, a task can be moved to a monitor group only if its already present in the parent ctrl_mon group. Task membership is indicated by a new field in the task_struct "u32 rmid" which holds the RMID for the task. RMID=0 is reserved for the default root group where the tasks belong to at mount. [tony: zero the rmid if rdtgroup was deleted when task was being moved] Signed-off-by: Tony Luck <tony.luck@linux.intel.com> Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-16-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt: Change closid type from int to u32Vikas Shivappa
OS associates a CLOSid(Class of service id) to a task by writing the high 32 bits of per CPU IA32_PQR_ASSOC MSR when a task is scheduled in. CPUID.(EAX=10H, ECX=1):EDX[15:0] enumerates the max CLOSID supported and it is zero indexed. Hence change the type to u32 from int. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-15-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt/cqm: Add mkdir support for RDT monitoringVikas Shivappa
Resource control groups can be created using mkdir in resctrl fs(rdtgroup). In order to extend the resctrl interface to support monitoring the control groups, extend the current mkdir to support resource monitoring also. This allows the rdtgroup created under the root directory to be able to both control and monitor resources (ctrl_mon group). The ctrl_mon groups are associated with one CLOSID like the legacy rdtgroups and one RMID(Resource monitoring ID) as well. Hardware uses RMID to track the resource usage. Once either of the CLOSID or RMID are exhausted, the mkdir fails with -ENOSPC. If there are RMIDs in limbo list but not free an -EBUSY is returned. User can also monitor a subset of the ctrl_mon rdtgroup's tasks/cpus using the monitor groups. The monitor groups are created using mkdir under the "mon_groups" directory in every ctrl_mon group. [Merged Tony's code: Removed a lot of common mkdir code, a fix to handling of the list of the child rdtgroups and some cleanups in list traversal. Also the changes to have similar alloc and free for CLOS/RMID and return -EBUSY when RMIDs are in limbo and not free] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-14-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt: Prepare for RDT monitoring mkdir supportVikas Shivappa
Separate the ctrl mkdir code from the rest in order to prepare for adding support for RDT monitoring mkdir support as well. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-13-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt/cqm: Add info files for RDT monitoringVikas Shivappa
Add info directory files specific to RDT monitoring. num_rmids: The number of RMIDs which are valid for the resource. mon_features: Lists the monitoring events if monitoring is enabled for the resource. max_threshold_occupancy: This is specific to llc_occupancy monitoring and is used to determine if an RMID can be reused. Provides an upper bound on the threshold and is shown to the user in bytes though the internal value will be rounded to the scaling factor supported by the h/w. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-12-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt: Simplify info and base file listsTony luck
The info directory files and base files need to be different for each resource like cache and Memory bandwidth. With in each resource, the files would be further different for monitoring and ctrl. This leads to a lot of different static array declarations given that we are adding resctrl monitoring. Simplify this to one common list of files and then declare a set of flags to choose the files based on the resource, whether it is info or base and if it is control type file. This is as a preparation to include monitoring based info and base files. No functional change. [Vikas: Extended the flags to have few bits per category like resource, info/base etc] Signed-off-by: Tony luck <tony.luck@intel.com> Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-11-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt: Cleanup namespace to support RDT monitoringVikas Shivappa
Few of the data-structures have generic names although they are RDT allocation specific. Rename them to be allocation specific to accommodate RDT monitoring. E.g. s/enabled/alloc_enabled/ No functional change. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-7-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt: Mark rdt_root and closid_alloc as staticReinette Chatre
Sparse reports that both of these can be static. Make it so. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Link: http://lkml.kernel.org/r/1501017287-28083-6-git-send-email-vikas.shivappa@linux.intel.com
2017-08-01x86/intel_rdt: Change file names to accommodate RDT monitor codeVikas Shivappa
Because the "perf cqm" and resctrl code were separately added and indivdually configurable, there seem to be separate context switch code and also things on global .h which are not really needed. Move only the scheduling specific code and definitions to <asm/intel_rdt_sched.h> and the put all the other declarations to a local intel_rdt.h. h/t to Reinette Chatre for pointing out that we should separate the public interfaces used by other parts of the kernel from private objects shared between the various files comprising RDT. No functional change. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-5-git-send-email-vikas.shivappa@linux.intel.com
2017-06-30x86/intel_rdt: Fix memory leak on mount failureVikas Shivappa
If mount fails, the kn_info directory is not freed causing memory leak. Add the missing error handling path. Fixes: 4e978d06dedb ("x86/intel_rdt: Add "info" files to resctrl file system") Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: vikas.shivappa@intel.com Cc: andi.kleen@intel.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1498503368-20173-3-git-send-email-vikas.shivappa@linux.intel.com
2017-04-14x86/intel_rdt/mba: Add info directory files for Memory Bandwidth AllocationVikas Shivappa
The files in the info directory for MBA are as follows: num_closids The maximum number of CLOSids available for MBA min_bandwidth The minimum memory bandwidth percentage value bandwidth_gran The granularity of the bandwidth control in percent for the particular CPU SKU. Intermediate values entered are rounded off to the previous control step available. Available bandwidth control steps are minimum_bandwidth + N * bandwidth_gran. delay_linear When set, the OS writes a linear percentage based value to the control MSRs ranging from minimum_bandwidth to 100 percent. This value is informational and has no influence on the values written to the schemata files. The values written to the schemata are always bandwidth percentage that is requested. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: vikas.shivappa@intel.com Link: http://lkml.kernel.org/r/1491611637-20417-7-git-send-email-vikas.shivappa@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-14x86/intel_rdt: Make information files resource specificVikas Shivappa
Cache allocation and memory bandwidth allocation require different information files in the resctrl/info directory, but the current implementation does not allow to have files per resource. Add the necessary fields to the resource struct and assign the files dynamically depending on the resource type. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: vikas.shivappa@intel.com Link: http://lkml.kernel.org/r/1491611637-20417-6-git-send-email-vikas.shivappa@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-14x86/intel_rdt: Move CBM specific data into a structThomas Gleixner
Memory bandwidth allocation requires different information than cache allocation. To avoid a lump of data in struct rdt_resource, move all cache related information into a seperate structure and add that to struct rdt_resource. Sanitize the data types while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: vikas.shivappa@intel.com
2017-04-14x86/intel_rdt: Cleanup namespace to support multiple resource typesVikas Shivappa
Lot of data structures and functions are named after cache specific resources(named after cbm, cache etc). In many cases other non cache resources may need to share the same data structures/functions. Generalize such naming to prepare to add more resources like memory bandwidth. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: vikas.shivappa@intel.com Link: http://lkml.kernel.org/r/1491611637-20417-3-git-send-email-vikas.shivappa@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-11Merge branch 'x86/urgent' into x86/cpu, to resolve conflictIngo Molnar
Conflicts: arch/x86/kernel/cpu/intel_rdt_schemata.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-10x86/intel_rdt: Add cpus_list rdtgroup fileJiri Olsa
The resource control filesystem provides only a bitmask based cpus file for assigning CPUs to a resource group. That's cumbersome with large cpumasks and non-intuitive when modifying the file from the command line. Range based cpu lists are commonly used along with bitmask based cpu files in various subsystems throughout the kernel. Add 'cpus_list' file which is CPU range based. # cd /sys/fs/resctrl/ # echo 1-10 > krava/cpus_list # cat krava/cpus_list 1-10 # cat krava/cpus 0007fe # cat cpus fffff9 # cat cpus_list 0,3-23 [ tglx: Massaged changelog and replaced "bitmask lists" by "CPU ranges" ] Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20170410145232.GF25354@krava Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-14x86/intel_rdt: Put group node in rdtgroup_kn_unlockJiri Olsa
The rdtgroup_kn_unlock waits for the last user to release and put its node. But it's calling kernfs_put on the node which calls the rdtgroup_kn_unlock, which might not be the group's directory node, but another group's file node. This race could be easily reproduced by running 2 instances of following script: mount -t resctrl resctrl /sys/fs/resctrl/ pushd /sys/fs/resctrl/ mkdir krava echo "krava" > krava/schemata rmdir krava popd umount /sys/fs/resctrl It triggers the slub debug error message with following command line config: slub_debug=,kernfs_node_cache. Call kernfs_put on the group's node to fix it. Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Shaohua Li <shli@fb.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1489501253-20248-1-git-send-email-jolsa@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-07Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes and minor updates all over the place: - an SGI/UV fix - a defconfig update - a build warning fix - move the boot_params file to the arch location in debugfs - a pkeys fix - selftests fix - boot message fixes - sparse fixes - a resume warning fix - ioapic hotplug fixes - reboot quirks ... plus various minor cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build/x86_64_defconfig: Enable CONFIG_R8169 x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirk x86/hpet: Prevent might sleep splat on resume x86/boot: Correct setup_header.start_sys name x86/purgatory: Fix sparse warning, symbol not declared x86/purgatory: Make functions and variables static x86/events: Remove last remnants of old filenames x86/pkeys: Check against max pkey to avoid overflows x86/ioapic: Split IOAPIC hot-removal into two steps x86/PCI: Implement pcibios_release_device to release IRQ from IOAPIC x86/intel_rdt: Remove duplicate inclusion of linux/cpu.h x86/vmware: Remove duplicate inclusion of asm/timer.h x86/hyperv: Hide unused label x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk x86/platform/uv/BAU: Fix HUB errors by remove initial write to sw-ack register x86/selftests: Add clobbers for int80 on x86_64 x86/apic: Simplify enable_IR_x2apic(), remove try_to_enable_IR() x86/apic: Fix a warning message in logical CPU IDs allocation x86/kdebugfs: Move boot params hierarchy under (debugfs)/x86/
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-01x86/intel_rdt: Remove duplicate inclusion of linux/cpu.hMasanari Iida
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Cc: fenghua.yu@intel.com Link: http://lkml.kernel.org/r/20170227130703.26968-1-standby24x7@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-09x86/intel_rdt: Implement show_options() for resctrlfsShaohua Li
Implement show_options() callback for intel resource control filesystem to expose the active mount options in /proc/ Signed-off-by: Shaohua Li <shli@fb.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/7dce7c1886ac9289442d254ea18322c92bd968da.1480717072.git.shli@fb.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-02x86/intel_rdt: Call intel_rdt_sched_in() with preemption disabledFenghua Yu
intel_rdt_sched_in() must be called with preemption disabled because the function accesses percpu variables (pqr_state and closid). If a task moves itself via move_myself() preemption is enabled, which violates the calling convention and can result in incorrect closid selection when the task gets preempted or migrated. Add the required protection and a comment about the calling convention. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: "Marcelo Tosatti" <mtosatti@redhat.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1480625714-54246-1-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-28x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmountFenghua Yu
When removing a sub directory/rdtgroup by rmdir or umount, closid in a task in the sub directory is set to default rdtgroup's closid which is 0. If the task is running on a CPU, the PQR_ASSOC MSR is only updated when the task runs through a context switch. Up to the context switch, the task runs with the wrong closid. Make the change immediately effective by invoking a smp function call on all CPUs which are running moved task. If one of the affected tasks was moved or scheduled out before the function call is executed on the CPU the only damage is the extra interruption of the CPU. [ tglx: Reworked it to avoid blindly interrupting all CPUs and extra loops ] Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1479511084-59727-2-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-28x86/intel_rdt: Fix setting of closid when adding CPUs to a groupFenghua Yu
There was a cut & paste error when adding code to update the per-cpu closid when changing the bitmask of CPUs to an rdt group. The update erronously assigns the closid of the default group to the CPUs which are moved to a group instead of assigning the closid of their new group. Use the proper closid. Fixes: f410770293a1 ("x86/intel_rdt: Update percpu closid immeditately on CPUs affected by change") Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1479511084-59727-1-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-15x86/intel_rdt: Update percpu closid immeditately on CPUs affected by changeeFenghua Yu
If CPUs are moved to or removed from a rdtgroup, the percpu closid storage is updated. If tasks running on an affected CPU use the percpu closid then the PQR_ASSOC MSR is only updated when the task runs through a context switch. Up to the context switch the CPUs operate on the wrong closid. This state is potentially unbound. Make the change immediately effective by invoking a smp function call on the affected CPUs which stores the new closid in the perpu storage and calls the rdt_sched_in() function which updates the MSR, if the current task uses the percpu closid. [ tglx: Made it work and massaged changelog once more ] Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1478912558-55514-3-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-15x86/intel_rdt: Reset per cpu closids on unmountFenghua Yu
All CPUs in a rdtgroup are given back to the default rdtgroup before the rdtgroup is removed during umount. After umount, the default rdtgroup contains all online CPUs, but the per cpu closids are not cleared. As a result the stale closid value will be used immediately after the next mount. Move all cpus to the default group and update the percpu closid storage. [ tglx: Massaged changelong ] Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1478912558-55514-2-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-15x86/intel_rdt: Prevent deadlock against hotplug lockThomas Gleixner
The cpu online/offline callbacks of intel_rdt lock rdtgroup_mutex nested inside of cpu hotplug lock. rdtgroup_cpus_write() does it in reverse order. Remove the get/put_online_cpus() calls from rdtgroup_cpus_write(). This is safe against cpu hotplug as the resource group cpumasks are protected by rdtgroup_mutex. Found by review, but should have been found if authors would have bothered to test cpu hotplug with lockdep enabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Shaohua Li <shli@fb.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com>
2016-11-15x86/intel_rdt: Protect info directory from removalFenghua Yu
The info directory and the per-resource subdirectories of the info directory have no reference to a struct rdtgroup in kn->priv. An attempt to remove one of those directories results in a NULL pointer dereference. Protect the directories from removal and return -EPERM instead of -ENOENT. [ tglx: Massaged changelog ] Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1478912558-55514-1-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit (git 2.34.1) at 2024-06-15 06:52:27 +0000