summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/cpu/microcode/core.c
AgeCommit message (Collapse)Author
2018-03-16x86/microcode: Fix CPU synchronization routineBorislav Petkov
Emanuel reported an issue with a hang during microcode update because my dumb idea to use one atomic synchronization variable for both rendezvous - before and after update - was simply bollocks: microcode: microcode_reload_late: late_cpus: 4 microcode: __reload_late: cpu 2 entered microcode: __reload_late: cpu 1 entered microcode: __reload_late: cpu 3 entered microcode: __reload_late: cpu 0 entered microcode: __reload_late: cpu 1 left microcode: Timeout while waiting for CPUs rendezvous, remaining: 1 CPU1 above would finish, leave and the others will still spin waiting for it to join. So do two synchronization atomics instead, which makes the code a lot more straightforward. Also, since the update is serialized and it also takes quite some time per microcode engine, increase the exit timeout by the number of CPUs on the system. That's ok because the moment all CPUs are done, that timeout will be cut short. Furthermore, panic when some of the CPUs timeout when returning from a microcode update: we can't allow a system with not all cores updated. Also, as an optimization, do not do the exit sync if microcode wasn't updated. Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20180314183615.17629-2-bp@alien8.de
2018-03-16x86/microcode: Attempt late loading only when new microcode is presentBorislav Petkov
Return UCODE_NEW from the scanning functions to denote that new microcode was found and only then attempt the expensive synchronization dance. Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20180314183615.17629-1-bp@alien8.de
2018-03-08x86/microcode: Synchronize late microcode loadingAshok Raj
Original idea by Ashok, completely rewritten by Borislav. Before you read any further: the early loading method is still the preferred one and you should always do that. The following patch is improving the late loading mechanism for long running jobs and cloud use cases. Gather all cores and serialize the microcode update on them by doing it one-by-one to make the late update process as reliable as possible and avoid potential issues caused by the microcode update. [ Borislav: Rewrite completely. ] Co-developed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-8-bp@alien8.de
2018-03-08x86/microcode: Request microcode on the BSPBorislav Petkov
... so that any newer version can land in the cache and can later be fished out by the application functions. Do that before grabbing the hotplug lock. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-7-bp@alien8.de
2018-03-08x86/microcode: Do not upload microcode if CPUs are offlineAshok Raj
Avoid loading microcode if any of the CPUs are offline, and issue a warning. Having different microcode revisions on the system at any time is outright dangerous. [ Borislav: Massage changelog. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-4-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-5-bp@alien8.de
2018-03-08x86/microcode: Get rid of struct apply_microcode_ctxBorislav Petkov
It is a useless remnant from earlier times. Use the ucode_state enum directly. No functional change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-2-bp@alien8.de
2018-02-17x86/CPU: Add a microcode loader callbackBorislav Petkov
Add a callback function which the microcode loader calls when microcode has been updated to a newer revision. Do the callback only when no error was encountered during loading. Tested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180216112640.11554-3-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-17x86/microcode: Propagate return value from updating functionsBorislav Petkov
... so that callers can know when microcode was updated and act accordingly. Tested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180216112640.11554-2-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-01-24x86/microcode: Fix again accessing initrd after having been freedBorislav Petkov
Commit 24c2503255d3 ("x86/microcode: Do not access the initrd after it has been freed") fixed attempts to access initrd from the microcode loader after it has been freed. However, a similar KASAN warning was reported (stack trace edited): smpboot: Booting Node 0 Processor 1 APIC 0x11 ================================================================== BUG: KASAN: use-after-free in find_cpio_data+0x9b5/0xa50 Read of size 1 at addr ffff880035ffd000 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.8-slack #7 Hardware name: System manufacturer System Product Name/A88X-PLUS, BIOS 3003 03/10/2016 Call Trace: dump_stack print_address_description kasan_report ? find_cpio_data __asan_report_load1_noabort find_cpio_data find_microcode_in_initrd __load_ucode_amd load_ucode_amd_ap load_ucode_ap After some investigation, it turned out that a merge was done using the wrong side to resolve, leading to picking up the previous state, before the 24c2503255d3 fix. Therefore the Fixes tag below contains a merge commit. Revert the mismerge by catching the save_microcode_in_initrd_amd() retval and thus letting the function exit with the last return statement so that initrd_gone can be set to true. Fixes: f26483eaedec ("Merge branch 'x86/urgent' into x86/microcode, to resolve conflicts") Reported-by: <higuita@gmx.net> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=198295 Link: https://lkml.kernel.org/r/20180123104133.918-2-bp@alien8.de
2018-01-09treewide: Use DEVICE_ATTR_WOJoe Perches
Convert DEVICE_ATTR uses to DEVICE_ATTR_WO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IWUSR\s*|\s*0200\s*)\)?\s*,\s*NULL\s*,\s*\s_store\s*\)/DEVICE_ATTR_WO(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-14x86/microcode: Do the family check firstBorislav Petkov
On CPUs like AMD's Geode, for example, we shouldn't even try to load microcode because they do not support the modern microcode loading interface. However, we do the family check *after* the other checks whether the loader has been disabled on the command line or whether we're running in a guest. So move the family checks first in order to exit early if we're being loaded on an unsupported family. Reported-and-tested-by: Sven Glodowski <glodi1@arcor.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.11.. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://bugzilla.suse.com/show_bug.cgi?id=1061396 Link: http://lkml.kernel.org/r/20171012112316.977-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-18x86: Constify attribute_group structuresArvind Yadav
attribute_groups are not supposed to change at runtime and none of the groups is modified. Mark the non-const structs as const. [ tglx: Folded into one big patch ] Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: tony.luck@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1500550238-15655-2-git-send-email-arvind.yadav.cs@gmail.com
2017-06-20x86/microcode: Look for the initrd at the correct address on 32-bitBorislav Petkov
Early during boot, the BSP finds the ramdisk's position from boot_params but by the time the APs get to boot, the BSP has continued in the mean time and has potentially managed to relocate that ramdisk. And in that case, the APs need to find the ramdisk at its new position, in *physical* memory as they're running before paging has been enabled. Thus, get the updated physical location of the ramdisk which is in the relocated_ramdisk variable. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170614140626.4462-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-12Tigran has movedAndrew Morton
Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-31Merge branch 'x86/urgent' into x86/microcode, to resolve conflictsIngo Molnar
Conflicts: arch/x86/kernel/cpu/microcode/amd.c arch/x86/kernel/cpu/microcode/core.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-30x86/microcode: Do not access the initrd after it has been freedBorislav Petkov
When we look for microcode blobs, we first try builtin and if that doesn't succeed, we fallback to the initrd supplied to the kernel. However, at some point doing boot, that initrd gets jettisoned and we shouldn't access it anymore. But we do, as the below KASAN report shows. That's because find_microcode_in_initrd() doesn't check whether the initrd is still valid or not. So do that. ================================================================== BUG: KASAN: use-after-free in find_cpio_data Read of size 1 by task swapper/1/0 page:ffffea0000db9d40 count:0 mapcount:0 mapping: (null) index:0x1 flags: 0x100000000000000() raw: 0100000000000000 0000000000000000 0000000000000001 00000000ffffffff raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.10.0-rc5-debug-00075-g2dbde22 #3 Hardware name: Dell Inc. XPS 13 9360/0839Y6, BIOS 1.2.3 12/01/2016 Call Trace: dump_stack ? _atomic_dec_and_lock ? __dump_page kasan_report_error ? pointer ? find_cpio_data __asan_report_load1_noabort ? find_cpio_data find_cpio_data ? vsprintf ? dump_stack ? get_ucode_user ? print_usage_bug find_microcode_in_initrd __load_ucode_intel ? collect_cpu_info_early ? debug_check_no_locks_freed load_ucode_intel_ap ? collect_cpu_info ? trace_hardirqs_on ? flat_send_IPI_mask_allbutself load_ucode_ap ? get_builtin_firmware ? flush_tlb_func ? do_raw_spin_trylock ? cpumask_weight cpu_init ? trace_hardirqs_off ? play_dead_common ? native_play_dead ? hlt_play_dead ? syscall_init ? arch_cpu_idle_dead ? do_idle start_secondary start_cpu Memory state around the buggy address: ffff880036e74f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e74f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff880036e75000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880036e75080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e75100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Tested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170126165833.evjemhbqzaepirxo@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-23x86/microcode/AMD: Check patch level only on the BSPBorislav Petkov
Check final patch levels for AMD only on the BSP. This way, we decide early and only once whether to continue loading or to leave the loader disabled on such systems. Simplify a lot. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170120202955.4091-13-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-23x86/microcode: Remove local vendor variableBorislav Petkov
Use x86_cpuid_vendor() directly. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170120202955.4091-12-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-23x86/microcode: Decrease CPUID useBorislav Petkov
Get CPUID(1).EAX value once per CPU and propagate value into the callers instead of conveniently calling it every time. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170120202955.4091-9-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-21x86/microcode/AMD: Reload proper initrd start addressBorislav Petkov
When we switch to virtual addresses and, especially after reserve_initrd()->relocate_initrd() have run, we have the updated initrd address in initrd_start. Use initrd_start then instead of the address which has been passed to us through boot params. (That still gets used when we're running the very early routines on the BSP). Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20161220144012.lc4cwrg6dphqbyqu@pd.tnic Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-19x86/microcode/AMD: Do not load when running on a hypervisorBorislav Petkov
Doing so is completely void of sense for multiple reasons so prevent it. Set dis_ucode_ldr to true and thus disable the microcode loader by default to address xen pv guests which execute the AP path but not the BSP path. By having it turned off by default, the APs won't run into the loader either. Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the xen pv one. That one gets the aforementioned "fix". Also, improve the detection method by caching the final decision whether to continue loading in dis_ucode_ldr and do it once on the BSP. The APs then simply test that value. Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Juergen Gross <jgross@suse.com> Link: http://lkml.kernel.org/r/20161218164414.9649-4-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-25x86/microcode: Bump driver version, update copyrightsBorislav Petkov
Let's increment that number finally: it is long overdue. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-13-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25x86/microcode: Rework microcode loadingBorislav Petkov
Yeah, I know, I know, this is a huuge patch and reviewing it is hard. Sorry but this is the only way I could think of in which I can rewrite the microcode patches loading procedure without breaking (knowingly) the driver. So maybe this patch is easier to review if one looks at the files after the patch has been applied instead at the diff. Because then it becomes pretty obvious: * The BSP-loading path - load_ucode_bsp() is working independently from the AP path now and it doesn't save any pointers or patches anymore - it solely parses the builtin or initrd microcode and applies the patch. That's it. This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly. * The AP-loading path - load_ucode_ap() then goes and scans builtin/initrd *again* for the microcode patches but it caches them this time so that we don't have to do that scan on each AP but only once. This simplifies the code considerably. Then, when we save the microcode from the initrd/builtin, we go and add the relevant patches to our own cache. The AMD side did do that and now the Intel side does it too. So no more pointer copying and blabla, we save the microcode patches ourselves and are independent from initrd/builtin. This whole conversion gives us other benefits like unifying the initrd parsing into a single function: find_microcode_in_initrd() is used by both. The diffstat speaks for itself: 456 insertions(+), 695 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25x86/microcode: Collect CPU info on resumeBorislav Petkov
We need to reread the CPU's microcode revision after resume because applied microcode gets "forgotten" depending on the sleep state. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-9-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25x86/microcode: Issue the debug printk on resume only on successBorislav Petkov
Move it after the patch application function which also checks whether we were successful. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-8-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25x86/microcode/amd: Hand down the CPU familyBorislav Petkov
Will be needed in a following patch. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-7-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25x86/microcode: Export the microcode cache linked listBorislav Petkov
It will be used by both drivers so move it to core.c. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-6-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25x86/microcode: Move driver authors to CREDITSBorislav Petkov
They're not active anymore. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161025095522.11964-3-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-19x86/microcode: Convert to hotplug state machineSebastian Andrzej Siewior
Install the callbacks via the state machine. CPU_UP_CANCELED_FROZEN() is not preserved: It is only there to free memory in an error case because it is assumed if the CPU does show up on resume it won't be seen ever again. As per Borislav: |IOW, you don't need mc_cpu_dead(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160907164523.46a2xnffha4bv63g@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-08x86/microcode: Remove unused symbol exportsBorislav Petkov
It is not a module anymore and those can be retracted. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160704170551.GC7261@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08x86/microcode: Propagate save_microcode_in_initrd() retvalBorislav Petkov
Will be used in a later patch. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1465225850-7352-6-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08x86/microcode: Fix suspend to RAM with builtin microcodeBorislav Petkov
Usually, after we have found the proper microcode blob for the current machine, we stash it away for later use with save_microcode_in_initrd(). However, with builtin microcode which doesn't come from the initrd, we don't call that function because CONFIG_BLK_DEV_INITRD=n and even if set, we don't have a valid initrd. In order to fix this, let's make save_microcode_in_initrd() an fs_initcall which runs before rootfs_initcall() as this was the time it was called previously through: rootfs_initcall(populate_rootfs) |-> free_initrd() |-> free_initrd_mem() |-> save_microcode_in_initrd() Also, we make it run independently from initrd functionality being present or not. And since it is called in the microcode loader only now, we can also make it static. Reported-and-tested-by: Jim Bos <jim876@xs4all.nl> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # v4.6 Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1465225850-7352-3-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-17x86/microcode: Remove unnecessary paravirt_enabled checkBoris Ostrovsky
Commit: a18a0f6850d4 ("x86, microcode: Don't initialize microcode code on paravirt") added a paravirt test in microcode_init(), primarily to avoid making mc_bp_resume()->load_ucode_ap()->check_loader_disabled_ap() calls because on 32-bit kernels this callchain ends up using __pa_nodebug() macro which is invalid for Xen PV guests. A subsequent commit: fbae4ba8c4a3 ("x86, microcode: Reload microcode on resume") eliminated this callchain thus making a18a0f6850d4 unnecessary. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: david.vrabel@citrix.com Cc: konrad.wilk@oracle.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1455612202-14414-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-09x86/microcode: Remove an unneeded NULL checkDan Carpenter
"uci" is an element of the ucode_cpu_info[] array, it can't be NULL. Tested-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Link: http://lkml.kernel.org/r/1454499225-21544-5-git-send-email-bp@alien8.de Link: http://lkml.kernel.org/r/20140120103046.GC14233@elgon.mountain Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-09x86/microcode: Remove redundant __setup() param parsingBorislav Petkov
We do parse for the disable microcode loader chicken bit very early. After the driver merge, the __setup() param parsing method is not needed anymore so get rid of it. In addition, fix a compiler warning from an old SLES11 gcc (4.3.4) reported by Jan Beulich <jbeulich@suse.com>: arch/x86/kernel/cpu/microcode/core.c: In function ‘load_ucode_bsp’: arch/x86/kernel/cpu/microcode/core.c:96: warning: array subscript is above array bounds Tested-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1454499225-21544-4-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-11Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Improved CPU ID handling code and related enhancements (Borislav Petkov) - RDRAND fix (Len Brown)" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Replace RDRAND forced-reseed with simple sanity check x86/MSR: Chop off lower 32-bit value x86/cpu: Fix MSR value truncation issue x86/cpu/amd, kvm: Satisfy guest kernel reads of IC_CFG MSR kvm: Add accessors for guest CPU's family, model, stepping x86/cpu: Unify CPU family, model, stepping calculation
2015-11-24x86/cpu: Unify CPU family, model, stepping calculationBorislav Petkov
Add generic functions which calc family, model and stepping from the CPUID_1.EAX leaf and stick them into the library we have. Rename those which do call CPUID with the prefix "x86_cpuid" as suggested by Paolo Bonzini. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1448273546-2567-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-23x86/microcode: Initialize the driver late when facilities are upBorislav Petkov
Running microcode_init() from setup_arch() is a bad idea because not even kmalloc() is ready at that point and the loader does all kinds of allocations and init/registration with various subsystems. Make it a late initcall when required facilities are initialized so that the microcode driver initialization can succeed too. Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20151120112400.GC4028@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-21x86/microcode: Remove modularization leftoversBorislav Petkov
Remove the remaining module functionality leftovers. Make "dis_ucode_ldr" an early_param and make it static again. Drop module aliases, autoloading table, description, etc. Bump version number, while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1445334889-300-4-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-21x86/microcode: Merge the early microcode loaderBorislav Petkov
Merge the early loader functionality into the driver proper. The diff is huge but logically, it is simply moving code from the _early.c files into the main driver. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1445334889-300-3-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-21x86/microcode: Unmodularize the microcode driverBorislav Petkov
Make CONFIG_MICROCODE a bool. It was practically a bool already anyway, since early loader was forcing it to =y. Regardless, there's no real reason to have something be a module which gets built-in on the majority of installations out there. And its not like there's noticeable change in functionality - we still can load late microcode - just the module glue disappears. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1445334889-300-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-01Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 init code fixlet from Ingo Molnar: "A single change: fix obsolete init code annotations" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Drop bogus __ref / __refdata annotations
2015-08-05bus: subsys: update return type of ->remove_dev() to voidViresh Kumar
Its return value is not used by the subsys core and nothing meaningful can be done with it, even if we want to use it. The subsys device is anyway getting removed. Update prototype of ->remove_dev() to make its return type as void. Fix all usage sites as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-20x86: Drop bogus __ref / __refdata annotationsMathias Krause
The __ref / __refdata annotations used to be needed because of referencing functions / variables annotated __cpuinit / __cpuinitdata. But those annotations vanished during the development of v3.11. Therefore most of the __ref / __refdata annotations are not needed anymore. As they may hide legitimate sections mismatches, we better get rid of them. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437409973-8927-1-git-send-email-minipli@googlemail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11x86/cpu/microcode: Zap changelogBorislav Petkov
It is useless at best and git history has it all detailed anyway. Update copyright while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1431332153-18566-3-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-28x86, microcode: Return error from driver init code when loader is disabledBoris Ostrovsky
Commits 65cef1311d5d ("x86, microcode: Add a disable chicken bit") and a18a0f6850d4 ("x86, microcode: Don't initialize microcode code on paravirt") allow microcode driver skip initialization when microcode loading is not permitted. However, they don't prevent the driver from being loaded since the init code returns 0. If at some point later the driver gets unloaded this will result in an oops while trying to deregister the (never registered) device. To avoid this, make init code return an error on paravirt or when microcode loading is disabled. The driver will then never be loaded. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1422411669-25147-1-git-send-email-boris.ostrovsky@oracle.com Reported-by: James Digwall <james@dingwall.me.uk> Cc: stable@vger.kernel.org # 3.18 Signed-off-by: Borislav Petkov <bp@suse.de>
2014-12-06x86, microcode: Reload microcode on resumeBorislav Petkov
Normally, we do reapply microcode on resume. However, in the cases where that microcode comes from the early loader and the late loader hasn't been utilized yet, there's no easy way for us to go and apply the patch applied during boot by the early loader. Thus, reuse the patch stashed by the early loader for the BSP. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-12-06x86, microcode: Don't initialize microcode code on paravirtBoris Ostrovsky
Paravirtual guests are not expected to load microcode into processors and therefore it is not necessary to initialize microcode loading logic. In fact, under certain circumstances initializing this logic may cause the guest to crash. Specifically, 32-bit kernels use __pa_nodebug() macro which does not work in Xen (the code path that leads to this macro happens during resume when we call mc_bp_resume()->load_ucode_ap() ->check_loader_disabled_ap()) Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1417469264-31470-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-18x86, microcode: Update BSPs microcode on resumeBorislav Petkov
In the situation when we apply early microcode but do *not* apply late microcode, we fail to update the BSP's microcode on resume because we haven't initialized the uci->mc microcode pointer. So, in order to alleviate that, we go and dig out the stashed microcode patch during early boot. It is basically the same thing that is done on the APs early during boot so do that too here. Tested-by: alex.schnaidt@gmail.com Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=88001 Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20141118094657.GA6635@pd.tnic Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit (git 2.34.1) at 2024-06-24 01:52:46 +0000