| Age | Commit message (Collapse) | Author |
|---|
|
Per the discussion about FRED MSR writes with WRMSRNS instruction [1],
use the alternatives mechanism to choose WRMSRNS when it's available,
otherwise fallback to WRMSR.
Remove the dependency on X86_FEATURE_WRMSRNS as WRMSRNS is no longer
dependent on FRED.
[1] https://lore.kernel.org/lkml/15f56e6a-6edd-43d0-8e83-bb6430096514@citrix.com/
Use DS prefix to pad WRMSR instead of a NOP. The prefix is ignored. At
least that's the current information from the hardware folks.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240822073906.2176342-3-xin@zytor.com
|
|
When SGX is not supported by the BIOS, the kernel log contains the error
'SGX disabled by BIOS', which can be confusing since there might not be an
SGX-related option in the BIOS settings.
For the kernel it's difficult to distinguish between the BIOS not
supporting SGX and the BIOS supporting SGX but having it disabled.
Therefore, update the error message to 'SGX disabled or unsupported by
BIOS' to make it easier for those reading kernel logs to understand what's
happening.
Reported-by: Bo Wu <wubo@uniontech.com>
Co-developed-by: Zelong Xiang <xiangzelong@uniontech.com>
Signed-off-by: Zelong Xiang <xiangzelong@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/F8D977CB368423F3+20240825104653.1294624-1-wangyuli@uniontech.com
Closes: https://github.com/linuxdeepin/developer-center/issues/10032
|
|
Building the SGX code with W=1 generates below warning:
arch/x86/kernel/cpu/sgx/main.c:741: warning: Function parameter or
struct member 'low' not described in 'sgx_calc_section_metric'
arch/x86/kernel/cpu/sgx/main.c:741: warning: Function parameter or
struct member 'high' not described in 'sgx_calc_section_metric'
...
The function sgx_calc_section_metric() is a simple helper which is only
used in sgx/main.c. There's no need to use kernel-doc style comment for
it.
Downgrade to a normal comment.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240825080649.145250-1-kai.huang@intel.com
|
|
etc.)
Add defines for the architectural memory types that can be shoved into
various MSRs and registers, e.g. MTRRs, PAT, VMX capabilities MSRs, EPTPs,
etc. While most MSRs/registers support only a subset of all memory types,
the values themselves are architectural and identical across all users.
Leave the goofy MTRR_TYPE_* definitions as-is since they are in a uapi
header, but add compile-time assertions to connect the dots (and sanity
check that the msr-index.h values didn't get fat-fingered).
Keep the VMX_EPTP_MT_* defines so that it's slightly more obvious that the
EPTP holds a single memory type in 3 of its 64 bits; those bits just
happen to be 2:0, i.e. don't need to be shifted.
Opportunistically use X86_MEMTYPE_WB instead of an open coded '6' in
setup_vmcs_config().
No functional change intended.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240605231918.2915961-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
On 64-bit init_mem_mapping() relies on the minimal page fault handler
provided by the early IDT mechanism. The real page fault handler is
installed right afterwards into the IDT.
This is problematic on CPUs which have X86_FEATURE_FRED set because the
real page fault handler retrieves the faulting address from the FRED
exception stack frame and not from CR2, but that does obviously not work
when FRED is not yet enabled in the CPU.
To prevent this enable FRED right after init_mem_mapping() without
interrupt stacks. Those are enabled later in trap_init() after the CPU
entry area is set up.
[ tglx: Encapsulate the FRED details ]
Fixes: 14619d912b65 ("x86/fred: FRED entry/exit and dispatch code")
Reported-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240709154048.3543361-4-xin@zytor.com
|
|
To enable FRED earlier, move the RSP initialization out of
cpu_init_fred_exceptions() into cpu_init_fred_rsps().
This is required as the FRED RSP initialization depends on the availability
of the CPU entry areas which are set up late in trap_init(),
No functional change intended. Marked with Fixes as it's a depedency for
the real fix.
Fixes: 14619d912b65 ("x86/fred: FRED entry/exit and dispatch code")
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240709154048.3543361-3-xin@zytor.com
|
|
Depending on whether FRED is enabled, sysvec_install() installs a system
interrupt handler into either into FRED's system vector dispatch table or
into the IDT.
However FRED can be disabled later in trap_init(), after sysvec_install()
has been invoked already; e.g., the HYPERVISOR_CALLBACK_VECTOR handler is
registered with sysvec_install() in kvm_guest_init(), which is called in
setup_arch() but way before trap_init().
IOW, there is a gap between FRED is available and available but disabled.
As a result, when FRED is available but disabled, early sysvec_install()
invocations fail to install the IDT handler resulting in spurious
interrupts.
Fix it by parsing cmdline param "fred=" in cpu_parse_early_param() to
ensure that FRED is disabled before the first sysvec_install() incovations.
Fixes: 3810da12710a ("x86/fred: Add a fred= cmdline param")
Reported-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240709154048.3543361-2-xin@zytor.com
|
|
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add Bus Lock Detect (called Bus Lock Trap in AMD docs) support for AMD
platforms. Bus Lock Detect is enumerated with CPUID Fn0000_0007_ECX_x0
bit [24 / BUSLOCKTRAP]. It can be enabled through MSR_IA32_DEBUGCTLMSR.
When enabled, hardware clears DR6[11] and raises a #DB exception on
occurrence of Bus Lock if CPL > 0. More detail about the feature can be
found in AMD APM[1].
[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
2023, Vol 2, 13.1.3.6 Bus Lock Trap
https://bugzilla.kernel.org/attachment.cgi?id=304653
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/all/20240808062937.1149-3-ravi.bangoria@amd.com
|
|
Bus Lock Detect functionality on AMD platforms works identical to Intel.
Move split_lock and bus_lock specific code from intel.c to a dedicated
file so that it can be compiled and supported on non-Intel platforms.
Also, introduce CONFIG_X86_BUS_LOCK_DETECT, make it dependent on
CONFIG_CPU_SUP_INTEL and add compilation dependency of the new bus_lock.c
file on CONFIG_X86_BUS_LOCK_DETECT.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/all/20240808062937.1149-2-ravi.bangoria@amd.com
|
|
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this.
Fixes: 2b1f6278d77c ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com
|
|
A Linux guest on Hyper-V gets the TSC frequency from a synthetic MSR, if
available. In this case, set X86_FEATURE_TSC_KNOWN_FREQ so that Linux
doesn't unnecessarily do refined TSC calibration when setting up the TSC
clocksource.
With this change, a message such as this is no longer output during boot
when the TSC is used as the clocksource:
[ 1.115141] tsc: Refined TSC clocksource calibration: 2918.408 MHz
Furthermore, the guest and host will have exactly the same view of the
TSC frequency, which is important for features such as the TSC deadline
timer that are emulated by the Hyper-V host.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240606025559.1631-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240606025559.1631-1-mhklinux@outlook.com>
|
|
According to the data sheet, writing the MODE register should stop the
counter (and thus the interrupts). This appears to work on real hardware,
at least modern Intel and AMD systems. It should also work on Hyper-V.
However, on some buggy virtual machines the mode change doesn't have any
effect until the counter is subsequently loaded (or perhaps when the IRQ
next fires).
So, set MODE 0 and then load the counter, to ensure that those buggy VMs
do the right thing and the interrupts stop. And then write MODE 0 *again*
to stop the counter on compliant implementations too.
Apparently, Hyper-V keeps firing the IRQ *repeatedly* even in mode zero
when it should only happen once, but the second MODE write stops that too.
Userspace test program (mostly written by tglx):
=====
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdint.h>
#include <sys/io.h>
static __always_inline void __out##bwl(type value, uint16_t port) \
{ \
asm volatile("out" #bwl " %" #bw "0, %w1" \
: : "a"(value), "Nd"(port)); \
} \
\
static __always_inline type __in##bwl(uint16_t port) \
{ \
type value; \
asm volatile("in" #bwl " %w1, %" #bw "0" \
: "=a"(value) : "Nd"(port)); \
return value; \
}
BUILDIO(b, b, uint8_t)
#define inb __inb
#define outb __outb
#define PIT_MODE 0x43
#define PIT_CH0 0x40
#define PIT_CH2 0x42
static int is8254;
static void dump_pit(void)
{
if (is8254) {
// Latch and output counter and status
outb(0xC2, PIT_MODE);
printf("%02x %02x %02x\n", inb(PIT_CH0), inb(PIT_CH0), inb(PIT_CH0));
} else {
// Latch and output counter
outb(0x0, PIT_MODE);
printf("%02x %02x\n", inb(PIT_CH0), inb(PIT_CH0));
}
}
int main(int argc, char* argv[])
{
int nr_counts = 2;
if (argc > 1)
nr_counts = atoi(argv[1]);
if (argc > 2)
is8254 = 1;
if (ioperm(0x40, 4, 1) != 0)
return 1;
dump_pit();
printf("Set oneshot\n");
outb(0x38, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
printf("Set periodic\n");
outb(0x34, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set stop (%d counter writes)\n", nr_counts);
outb(0x30, PIT_MODE);
while (nr_counts--)
outb(0xFF, PIT_CH0);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set MODE 0\n");
outb(0x30, PIT_MODE);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
return 0;
}
=====
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-2-dwmw2@infradead.org
|
|
Current AMD systems can report MCA errors using the ACPI Boot Error
Record Table (BERT). The BERT entries for MCA errors will be an x86
Common Platform Error Record (CPER) with an MSR register context that
matches the MCAX/SMCA register space.
However, the BERT will not necessarily be processed on the CPU that
reported the MCA errors. Therefore, the correct CPU number needs to be
determined and the information saved in struct mce.
Use the newly defined mce_prep_record_*() helpers to get the correct
data.
Also, add an explicit check to verify that a valid CPU number was found
from the APIC ID search.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20240730182958.4117158-4-yazen.ghannam@amd.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Generally, MCA information for an error is gathered on the CPU that
reported the error. In this case, CPU-specific information from the
running CPU will be correct.
However, this will be incorrect if the MCA information is gathered while
running on a CPU that didn't report the error. One example is creating
an MCA record using mce_prep_record() for errors reported from ACPI.
Split mce_prep_record() so that there is a helper function to gather
common, i.e. not CPU-specific, information and another helper for
CPU-specific information.
Leave mce_prep_record() defined as-is for the common case when running
on the reporting CPU.
Get MCG_CAP in the global helper even though the register is per-CPU.
This value is not already cached per-CPU like other values. And it does
not assist with any per-CPU decoding or handling.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20240730182958.4117158-3-yazen.ghannam@amd.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
There is no MCE "setup" done in mce_setup(). Rather, this function initializes
and prepares an MCE record.
Rename the function to highlight what it does.
No functional change is intended.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20240730182958.4117158-2-yazen.ghannam@amd.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Add some new Zen5 models for the 0x1A family.
[ bp: Merge the 0x60 and 0x70 ranges. ]
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240729064626.24297-1-bp@kernel.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated, where some
mitigations have entries in Kconfig, and they could be modified, while others
mitigations do not have Kconfig entries, and could not be controlled at build
time.
Create a new kernel config that allows GDS to be completely disabled,
similarly to the "gather_data_sampling=off" or "mitigations=off" kernel
command-line.
Now, there are two options for GDS mitigation:
* CONFIG_MITIGATION_GDS=n -> Mitigation disabled (New)
* CONFIG_MITIGATION_GDS=y -> Mitigation enabled (GDS_MITIGATION_FULL)
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-12-leitao@debian.org
|
|
Remove the MITIGATION_GDS_FORCE Kconfig option, which aggressively disables
AVX as a mitigation for Gather Data Sampling (GDS) vulnerabilities. This
option is not widely used by distros.
While removing the Kconfig option, retain the runtime configuration ability
through the `gather_data_sampling=force` kernel parameter. This allows users
to still enable this aggressive mitigation if needed, without baking it into
the kernel configuration.
Simplify the kernel configuration while maintaining flexibility for runtime
mitigation choices.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Link: https://lore.kernel.org/r/20240729164105.554296-11-leitao@debian.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the SSB CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-10-leitao@debian.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the Spectre V2 CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-9-leitao@debian.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the SRBDS CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-8-leitao@debian.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the Spectre v1 CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-7-leitao@debian.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the RETBLEED CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-6-leitao@debian.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the L1TF CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-5-leitao@debian.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the MMIO Stale data CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-4-leitao@debian.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the TAA CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-3-leitao@debian.org
|
|
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the MDS CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-2-leitao@debian.org
|
|
Initialize equiv_id in order to shut up:
arch/x86/kernel/cpu/microcode/amd.c:714:6: warning: variable 'equiv_id' is \
used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (x86_family(bsp_cpuid_1_eax) < 0x17) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
because clang doesn't do interprocedural analysis for warnings to see
that this variable won't be used uninitialized.
Fixes: 94838d230a6c ("x86/microcode/AMD: Use the family,model,stepping encoded in the patch ID")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407291815.gJBST0P3-lkp@intel.com/
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
The broken patch results in a call to init_freq_invariance_cppc() in a CPU
hotplug handler in both the path for initially present CPUs and those
hotplugged later. That function includes a one time call to
amd_set_max_freq_ratio() which in turn calls freq_invariance_enable() that has
a static_branch_enable() which takes the cpu_hotlug_lock which is already
held.
Avoid the deadlock by using static_branch_enable_cpuslocked() as the lock will
always be already held. The equivalent path on Intel does not already hold
this lock, so take it around the call to freq_invariance_enable(), which
results in it being held over the call to register_syscall_ops, which looks to
be safe to do.
Fixes: c1385c1f0ba3 ("ACPI: processor: Simplify initial onlining to use same path for cold and hotplug")
Closes: https://lore.kernel.org/all/CABXGCsPvqBfL5hQDOARwfqasLRJ_eNPBbCngZ257HOe=xbWDkA@mail.gmail.com/
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240729105504.2170-1-Jonathan.Cameron@huawei.com
|
|
On Zen and newer, the family, model and stepping is part of the
microcode patch ID so that the equivalence table the driver has been
using, is not needed anymore.
So switch the driver to use that from now on.
The equivalence table in the microcode blob should still remain in case
there's need to pass some additional information to the kernel loader.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240725112037.GBZqI1BbUk1KMlOJ_D@fat_crate.local
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.
Specifics:
- Add Loongson-3 CPUFreq driver support (Huacai Chen)
- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)
- Switch cpufreq to new Intel CPU model defines (Tony Luck)
- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)
- Make cpufreq_boost_enabled() return bool (Dhruva Gole)
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)
- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)
- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)
- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)
- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)
- Simplify if condition in the idle_inject driver (Thorsten Blum)
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)
- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"
* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Enable Sub-NUMA clustering to work with resource control on Intel by
teaching resctrl to handle scopes due to the clustering which
partitions the L3 cache into sets. Modify and extend the subsystem to
handle such scopes properly
* tag 'x86_cache_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Update documentation with Sub-NUMA cluster changes
x86/resctrl: Detect Sub-NUMA Cluster (SNC) mode
x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Make __mon_event_count() handle sum domains
x86/resctrl: Fill out rmid_read structure for smp_call*() to read a counter
x86/resctrl: Handle removing directories in Sub-NUMA Cluster (SNC) mode
x86/resctrl: Create Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Allocate a new field in union mon_data_bits
x86/resctrl: Refactor mkdir_mondata_subdir() with a helper function
x86/resctrl: Initialize on-stack struct rmid_read instances
x86/resctrl: Add a new field to struct rmid_read for summation of domains
x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Block use of mba_MBps mount option on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Introduce snc_nodes_per_l3_cache
x86/resctrl: Add node-scope to the options for feature scope
x86/resctrl: Split the rdt_domain and rdt_hw_domain structures
x86/resctrl: Prepare for different scope for control/monitor operations
x86/resctrl: Prepare to split rdt_domain structure
x86/resctrl: Prepare for new domain scope
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu model updates from Borislav Petkov:
- Flip the logic to add feature names to /proc/cpuinfo to having to
explicitly specify the flag if there's a valid reason to show it in
/proc/cpuinfo
- Switch a bunch of Intel x86 model checking code to the new CPU model
defines
- Fixes and cleanups
* tag 'x86_cpu_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/intel: Drop stray FAM6 check with new Intel CPU model defines
x86/cpufeatures: Flip the /proc/cpuinfo appearance logic
x86/CPU/AMD: Always inline amd_clear_divider()
x86/mce/inject: Add missing MODULE_DESCRIPTION() line
perf/x86/rapl: Switch to new Intel CPU model defines
x86/boot: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
perf/x86/intel: Switch to new Intel CPU model defines
x86/virt/tdx: Switch to new Intel CPU model defines
x86/PCI: Switch to new Intel CPU model defines
x86/cpu/intel: Switch to new Intel CPU model defines
x86/platform/intel-mid: Switch to new Intel CPU model defines
x86/pconfig: Remove unused MKTME pconfig code
x86/cpu: Remove useless work in detect_tme_early()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vmware updates from Borislav Petkov:
- Add a unified VMware hypercall API layer which should be used by all
callers instead of them doing homegrown solutions. This will provide
for adding API support for confidential computing solutions like TDX
* tag 'x86_vmware_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Add TDX hypercall support
x86/vmware: Remove legacy VMWARE_HYPERCALL* macros
x86/vmware: Correct macro names
x86/vmware: Use VMware hypercall API
drm/vmwgfx: Use VMware hypercall API
input/vmmouse: Use VMware hypercall API
ptp/vmware: Use VMware hypercall API
x86/vmware: Introduce VMware hypercall API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing updates from Borislav Petkov:
"Unrelated x86/cc changes queued here to avoid ugly cross-merges and
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
Add support to be able to kexec TDX guests:
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a
new kernel
- Cleanup, readjust and massage related code"
* tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
ACPI: tables: Print MULTIPROC_WAKEUP when MADT is parsed
x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
x86/mm: Introduce kernel_ident_mapping_free()
x86/smp: Add smp_ops.stop_this_cpu() callback
x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
x86/mm: Do not zap page table entries mapping unaccepted memory table during kdump
x86/mm: Make e820__end_ram_pfn() cover E820_TYPE_ACPI ranges
x86/tdx: Convert shared memory back to private on kexec
x86/mm: Add callbacks to prepare encrypted memory for kexec
x86/tdx: Account shared memory
x86/mm: Return correct level from lookup_address() if pte is none
x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
x86/kexec: Keep CR4.MCE set during kexec for TDX guest
x86/relocate_kernel: Use named labels for less confusion
cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
cpu/hotplug: Add support for declaring CPU offlining not supported
x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
x86/acpi: Extract ACPI MADT wakeup code into a separate file
x86/kexec: Remove spurious unconditional JMP from from identity_mapped()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- A cleanup and a correction to the error injection driver to inject a
MCA_MISC value only when one has actually been supplied by the user
* tag 'ras_core_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Remove unused variable and return value in machine_check_poll()
x86/mce/inject: Only write MCA_MISC when a value has been supplied
|
|
There isn't a simple hardware bit that indicates whether a CPU is running in
Sub-NUMA Cluster (SNC) mode. Infer the state by comparing the number of CPUs
sharing the L3 cache with CPU0 to the number of CPUs in the same NUMA node as
CPU0.
Add the missing definition of pr_fmt() to monitor.c. This wasn't noticed
before as there are only "can't happen" console messages from this file.
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-19-tony.luck@intel.com
|
|
Hardware has two RMID configuration options for SNC systems. The default
mode divides RMID counters between SNC nodes. E.g. with 200 RMIDs and
two SNC nodes per L3 cache RMIDs 0..99 are used on node 0, and 100..199
on node 1. This isn't compatible with Linux resctrl usage. On this
example system a process using RMID 5 would only update monitor counters
while running on SNC node 0.
The other mode is "RMID Sharing Mode". This is enabled by clearing bit
0 of the RMID_SNC_CONFIG (0xCA0) model specific register. In this mode
the number of logical RMIDs is the number of physical RMIDs (from CPUID
leaf 0xF) divided by the number of SNC nodes per L3 cache instance. A
process can use the same RMID across different SNC nodes.
See the "Intel Resource Director Technology Architecture Specification"
for additional details.
When SNC is enabled, update the MSR when a monitor domain is marked
online. Technically this is overkill. It only needs to be done once
per L3 cache instance rather than per SNC domain. But there is no harm
in doing it more than once, and this is not in a critical path.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240702173820.90368-3-tony.luck@intel.com
|
|
Legacy resctrl monitor files must provide the sum of event values across
all Sub-NUMA Cluster (SNC) domains that share an L3 cache instance.
There are now two cases:
1) A specific domain is provided in struct rmid_read
This is either a non-SNC system, or the request is to read data
from just one SNC node.
2) Domain pointer is NULL. In this case the cacheinfo field in struct
rmid_read indicates that all SNC nodes that share that L3 cache
instance should have the event read and return the sum of all
values.
Update the CPU sanity check. The existing check that an event is read
from a CPU in the requested domain still applies when reading a single
domain. But when summing across domains a more relaxed check that the
current CPU is in the scope of the L3 cache instance is appropriate
since the MSRs to read events are scoped at L3 cache level.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-17-tony.luck@intel.com
|
|
mon_event_read() fills out most fields of the struct rmid_read that is passed
via an smp_call*() function to a CPU that is part of the correct domain to
read the monitor counters.
With Sub-NUMA Cluster (SNC) mode there are now two cases to handle:
1) Reading a file that returns a value for a single domain.
+ Choose the CPU to execute from the domain cpu_mask
2) Reading a file that must sum across domains sharing an L3 cache
instance.
+ Indicate to called code that a sum is needed by passing a NULL
rdt_mon_domain pointer.
+ Choose the CPU from the L3 shared_cpu_map.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-16-tony.luck@intel.com
|
|
In SNC mode, there are multiple subdirectories in each L3 level monitor
directory (one for each SNC node). If all the CPUs in an SNC node are taken
offline, just remove the SNC directory for that node. In non-SNC mode, or when
the last SNC node directory is removed, remove the L3 monitor directory.
Add a helper function to avoid duplicated code.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240702173820.90368-2-tony.luck@intel.com
|
|
When SNC mode is enabled, create subdirectories and files to monitor at the SNC
node granularity. Legacy behavior is preserved by tagging the monitor files at
the L3 granularity with the "sum" attribute. When the user reads these files
the kernel will read monitor data from all SNC nodes that share the same L3
cache instance and return the aggregated value to the user.
Note that the "domid" field for files that must sum across SNC domains has the
L3 cache instance id, while non-summing files use the domain id.
The "sum" files do not need to make a call to mon_event_read() to initialize
the MBM counters. This will be handled by initializing the individual SNC nodes
that share the L3.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-14-tony.luck@intel.com
|
|
When Sub-NUMA Cluster (SNC) mode is enabled, the legacy monitor reporting files
must report the sum of the data from all of the SNC nodes that share the L3
cache that is referenced by the monitor file.
Resctrl squeezes all the attributes of these files into 32 bits so they can be
stored in the "priv" field of struct kernfs_node.
Currently, only three monitor events are defined by enum resctrl_event_id so
reducing it from 8 bits to 7 bits still provides more than enough space to
represent all the known event types.
But note that this choice was arbitrary. The "rid" field is also far wider
than needed for the current number of resource id types. This structure is
purely internal to resctrl, no ABI issues with modifying it. Subsequent changes
may rearrange the allocation of bits between each of the fields as needed.
Give the bit to a new "sum" field that indicates that reading this file must
sum across SNC nodes. This bit also indicates that the domid field is the id of
an L3 cache (instead of a domain id) to find which domains must be summed.
Fix up other issues in the kerneldoc description for mon_data_bits.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-13-tony.luck@intel.com
|
|
In Sub-NUMA Cluster (SNC) mode Linux must create the monitor
files in the original "mon_L3_XX" directories and also in each
of the "mon_sub_L3_YY" directories.
Refactor mkdir_mondata_subdir() to move the creation of monitoring files
into a helper function to avoid the need to duplicate code later.
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-12-tony.luck@intel.com
|
|
New semantics rely on some struct rmid_read members having NULL values to
distinguish between the SNC and non-SNC scenarios. resctrl can thus no longer
rely on this struct not being initialized properly.
Initialize all on-stack declarations of struct rmid_read:
rdtgroup_mondata_show()
mbm_update()
mkdir_mondata_subdir()
to ensure that garbage values from the stack are not passed down to other
functions.
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-11-tony.luck@intel.com
|
|
When a user reads a monitor file rdtgroup_mondata_show() calls mon_event_read()
to package up all the required details into an rmid_read structure which is
passed across the smp_call*() infrastructure to code that will read data from
hardware and return the value (or error status) in the rmid_read structure.
Sub-NUMA Cluster (SNC) mode adds files with new semantics. These require the
smp_call-ed code to sum event data from all domains that share an L3 cache.
Add a pointer to the L3 "cacheinfo" structure to struct rmid_read for the data
collection routines to use to pick the domains to be summed.
[ Reinette: the rmid_read structure has become complex enough so document each
of its fields and provide the kerneldoc documentation for struct rmid_read. ]
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-10-tony.luck@intel.com
|
|
When SNC is enabled, monitoring data is collected at the SNC node granularity,
but must be reported at L3-cache granularity for backwards compatibility in
addition to reporting at the node level.
Add a "ci" field to the rdt_mon_domain structure to save the cache information
about the enclosing L3 cache for the domain. This provides:
1) The cache id which is needed to compose the name of the legacy monitoring
directory, and to determine which domains should be summed to provide
L3-scoped data.
2) The shared_cpu_map which is needed to determine which CPUs can be used to
read the RMID counters with the MSR interface.
This is the first step to an eventual goal of monitor reporting files like this
(for a system with two SNC nodes per L3):
$ cd /sys/fs/resctrl/mon_data
$ tree mon_L3_00
mon_L3_00 <- 00 here is L3 cache id
├── llc_occupancy \ These files provide legacy support
├── mbm_local_bytes > for non-SNC aware monitor apps
├── mbm_total_bytes / that expect data at L3 cache level
├── mon_sub_L3_00 <- 00 here is SNC node id
│ ├── llc_occupancy \ These files are finer grained
│ ├── mbm_local_bytes > data from each SNC node
│ └── mbm_total_bytes /
└── mon_sub_L3_01
├── llc_occupancy \
├── mbm_local_bytes > As above, but for node 1.
└── mbm_total_bytes /
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-9-tony.luck@intel.com
|
|
systems
When SNC is enabled there is a mismatch between the MBA control function
which operates at L3 cache scope and the MBM monitor functions which
measure memory bandwidth on each SNC node.
Block use of the mba_MBps when scopes for MBA/MBM do not match.
Improve user diagnostics by adding invalfc() message when mba_MBps
is not supported.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-8-tony.luck@intel.com
|
