summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/kvmclock.c
AgeCommit message (Collapse)Author
2019-02-20x86: kvmguest: use TSC clocksource if invariant TSC is exposedMarcelo Tosatti
The invariant TSC bit has the following meaning: "The time stamp counter in newer processors may support an enhancement, referred to as invariant TSC. Processor's support for invariant TSC is indicated by CPUID.80000007H:EDX[8]. The invariant TSC will run at a constant rate in all ACPI P-, C-. and T-states. This is the architectural behavior moving forward. On processors with invariant TSC support, the OS may use the TSC for wall clock timer services (instead of ACPI or HPET timers). TSC reads are much more efficient and do not incur the overhead associated with a ring transition or access to a platform resource." IOW, TSC does not change frequency. In such case, and with TSC scaling hardware available to handle migration, it is possible to use the TSC clocksource directly, whose system calls are faster. Reduce the rating of kvmclock clocksource to allow TSC clocksource to be the default if invariant TSC is exposed. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> v2: Use feature bits and tsc_unstable() check (Sean Christopherson) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20x86/kvmclock: set offset for kvm unstable clockPavel Tatashin
VMs may show incorrect uptime and dmesg printk offsets on hypervisors with unstable clock. The problem is produced when VM is rebooted without exiting from qemu. The fix is to calculate clock offset not only for stable clock but for unstable clock as well, and use kvm_sched_clock_read() which substracts the offset for both clocks. This is safe, because pvclock_clocksource_read() does the right thing and makes sure that clock always goes forward, so once offset is calculated with unstable clock, we won't get new reads that are smaller than offset, and thus won't get negative results. Thank you Jon DeVree for helping to reproduce this issue. Fixes: 857baa87b642 ("sched/clock: Enable sched clock early") Cc: stable@vger.kernel.org Reported-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-21x86/kvmclock: convert to SPDX identifiersPeng Hao
Update the verbose license text with the matching SPDX license identifier. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> [Changed deprecated GPL-2.0+ to GPL-2.0-or-later. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-10-23Merge branch 'x86-paravirt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt updates from Ingo Molnar: "Two main changes: - Remove no longer used parts of the paravirt infrastructure and put large quantities of paravirt ops under a new config option PARAVIRT_XXL=y, which is selected by XEN_PV only. (Joergen Gross) - Enable PV spinlocks on Hyperv (Yi Sun)" * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Enable PV qspinlock for Hyper-V x86/hyperv: Add GUEST_IDLE_MSR support x86/paravirt: Clean up native_patch() x86/paravirt: Prevent redefinition of SAVE_FLAGS macro x86/xen: Make xen_reservation_lock static x86/paravirt: Remove unneeded mmu related paravirt ops bits x86/paravirt: Move the Xen-only pv_mmu_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move the pv_irq_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move the Xen-only pv_cpu_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move items in pv_info under PARAVIRT_XXL umbrella x86/paravirt: Introduce new config option PARAVIRT_XXL x86/paravirt: Remove unused paravirt bits x86/paravirt: Use a single ops structure x86/paravirt: Remove clobbers from struct paravirt_patch_site x86/paravirt: Remove clobbers parameter from paravirt patch functions x86/paravirt: Make paravirt_patch_call() and paravirt_patch_jmp() static x86/xen: Add SPDX identifier in arch/x86/xen files x86/xen: Link platform-pci-unplug.o only if CONFIG_XEN_PVHVM x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.c x86/xen: Move pv irq related functions under CONFIG_XEN_PV umbrella
2018-09-15x86/kvm: Use __bss_decrypted attribute in shared variablesBrijesh Singh
The recent removal of the memblock dependency from kvmclock caused a SEV guest regression because the wall_clock and hv_clock_boot variables are no longer mapped decrypted when SEV is active. Use the __bss_decrypted attribute to put the static wall_clock and hv_clock_boot in the .bss..decrypted section so that they are mapped decrypted during boot. In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer assigns either an element of the static array or dynamically allocated memory for the pvclock data pointer. The static array are now mapped decrypted but the dynamically allocated memory is not mapped decrypted. However, when SEV is active this memory range must be mapped decrypted. Add a function which is called after the page allocator is up, and allocate memory for the pvclock data pointers for the all possible cpus. Map this memory range as decrypted when SEV is active. Fixes: 368a540e0232 ("x86/kvmclock: Remove memblock dependency") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com
2018-09-03x86/paravirt: Use a single ops structureJuergen Gross
Instead of using six globally visible paravirt ops structures combine them in a single structure, keeping the original structures as sub-structures. This avoids the need to assemble struct paravirt_patch_template at runtime on the stack each time apply_paravirt() is being called (i.e. when loading a module). [ tglx: Made the struct and the initializer tabular for readability sake ] Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: virtualization@lists.linux-foundation.org Cc: akataria@vmware.com Cc: rusty@rustcorp.com.au Cc: boris.ostrovsky@oracle.com Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180828074026.820-9-jgross@suse.com
2018-08-14Merge branch 'l1tf-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Merge L1 Terminal Fault fixes from Thomas Gleixner: "L1TF, aka L1 Terminal Fault, is yet another speculative hardware engineering trainwreck. It's a hardware vulnerability which allows unprivileged speculative access to data which is available in the Level 1 Data Cache when the page table entry controlling the virtual address, which is used for the access, has the Present bit cleared or other reserved bits set. If an instruction accesses a virtual address for which the relevant page table entry (PTE) has the Present bit cleared or other reserved bits set, then speculative execution ignores the invalid PTE and loads the referenced data if it is present in the Level 1 Data Cache, as if the page referenced by the address bits in the PTE was still present and accessible. While this is a purely speculative mechanism and the instruction will raise a page fault when it is retired eventually, the pure act of loading the data and making it available to other speculative instructions opens up the opportunity for side channel attacks to unprivileged malicious code, similar to the Meltdown attack. While Meltdown breaks the user space to kernel space protection, L1TF allows to attack any physical memory address in the system and the attack works across all protection domains. It allows an attack of SGX and also works from inside virtual machines because the speculation bypasses the extended page table (EPT) protection mechanism. The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646 The mitigations provided by this pull request include: - Host side protection by inverting the upper address bits of a non present page table entry so the entry points to uncacheable memory. - Hypervisor protection by flushing L1 Data Cache on VMENTER. - SMT (HyperThreading) control knobs, which allow to 'turn off' SMT by offlining the sibling CPU threads. The knobs are available on the kernel command line and at runtime via sysfs - Control knobs for the hypervisor mitigation, related to L1D flush and SMT control. The knobs are available on the kernel command line and at runtime via sysfs - Extensive documentation about L1TF including various degrees of mitigations. Thanks to all people who have contributed to this in various ways - patches, review, testing, backporting - and the fruitful, sometimes heated, but at the end constructive discussions. There is work in progress to provide other forms of mitigations, which might be less horrible performance wise for a particular kind of workloads, but this is not yet ready for consumption due to their complexity and limitations" * 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) x86/microcode: Allow late microcode loading with SMT disabled tools headers: Synchronise x86 cpufeatures.h for L1TF additions x86/mm/kmmio: Make the tracer robust against L1TF x86/mm/pat: Make set_memory_np() L1TF safe x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert x86/speculation/l1tf: Invert all not present mappings cpu/hotplug: Fix SMT supported evaluation KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry x86/speculation: Simplify sysfs report of VMX L1TF vulnerability Documentation/l1tf: Remove Yonah processors from not vulnerable list x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr() x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d x86: Don't include linux/irq.h from asm/hardirq.h x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d x86/irq: Demote irq_cpustat_t::__softirq_pending to u16 x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush() x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond' x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush() cpu/hotplug: detect SMT disabled by BIOS ...
2018-07-30x86/kvmclock: Mark kvm_get_preset_lpj() as __initDou Liyang
kvm_get_preset_lpj() is only called from kvmclock_init(), so mark it __init as well. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář<rkrcmar@redhat.com> Cc: <kvm@vger.kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/20180730075421.22830-3-douly.fnst@cn.fujitsu.com
2018-07-20x86/kvmclock: Switch kvmclock data to a PER_CPU variableThomas Gleixner
The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20x86/kvmclock: Move kvmclock vsyscall param and init to kvmclockThomas Gleixner
There is no point to have this in the kvm code itself and call it from there. This can be called from an initcall and the parameter is cleared when the hypervisor is not KVM. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-7-pasha.tatashin@oracle.com
2018-07-20x86/kvmclock: Mark variables __initdata and __ro_after_initThomas Gleixner
The kvmclock parameter is init data and the other variables are not modified after init. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-6-pasha.tatashin@oracle.com
2018-07-20x86/kvmclock: Cleanup the codeThomas Gleixner
- Cleanup the mrs write for wall clock. The type casts to (int) are sloppy because the wrmsr parameters are u32 and aside of that wrmsrl() already provides the high/low split for free. - Remove the pointless get_cpu()/put_cpu() dance from various functions. Either they are called during early init where CPU is guaranteed to be 0 or they are already called from non preemptible context where smp_processor_id() can be used safely - Simplify the convoluted check for kvmclock in the init function. - Mark the parameter parsing function __init. No point in keeping it around. - Convert to pr_info() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-5-pasha.tatashin@oracle.com
2018-07-20x86/kvmclock: Decrapify kvm_register_clock()Thomas Gleixner
The return value is pointless because the wrmsr cannot fail if KVM_FEATURE_CLOCKSOURCE or KVM_FEATURE_CLOCKSOURCE2 are set. kvm_register_clock() is only called locally so wants to be static. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-4-pasha.tatashin@oracle.com
2018-07-20x86/kvmclock: Remove page size requirement from wall_clockThomas Gleixner
There is no requirement for wall_clock data to be page aligned or page sized. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-3-pasha.tatashin@oracle.com
2018-07-20x86/kvmclock: Remove memblock dependencyPavel Tatashin
KVM clock is initialized later compared to other hypervisor clocks because it has a dependency on the memblock allocator. Bring it in line with other hypervisors by using memory from the BSS instead of allocating it. The benefits: - Remove ifdef from common code - Earlier availability of the clock - Remove dependency on memblock, and reduce code The downside: - Static allocation of the per cpu data structures sized NR_CPUS * 64byte Will be addressed in follow up patches. [ tglx: Split out from larger series ] Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-2-pasha.tatashin@oracle.com
2018-07-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Miscellaneous bugfixes, plus a small patchlet related to Spectre v2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvmclock: fix TSC calibration for nested guests KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel. x86/kvmclock: set pvti_cpu0_va after enabling kvmclock x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR
2018-07-18kvmclock: fix TSC calibration for nested guestsPeng Hao
Inside a nested guest, access to hardware can be slow enough that tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work to be called periodically and the nested guest to spend a lot of time reading the ACPI timer. However, if the TSC frequency is available from the pvclock page, we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration. 'refine' operation. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> [Commit message rewritten. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-15x86/kvmclock: set pvti_cpu0_va after enabling kvmclockRadim Krčmář
pvti_cpu0_va is the address of shared kvmclock data structure. pvti_cpu0_va is currently kept unset (1) on 32 bit systems, (2) when kvmclock vsyscall is disabled, and (3) if kvmclock is not stable. This poses a problem, because kvm_ptp needs pvti_cpu0_va, but (1) can work on 32 bit, (2) has little relation to the vsyscall, and (3) does not need stable kvmclock (although kvmclock won't be used for system clock if it's not stable, so kvm_ptp is pointless in that case). Expose pvti_cpu0_va whenever kvmclock is enabled to allow all users to work with it. This fixes a regression found on Gentoo: https://bugs.gentoo.org/658544. Fixes: 9f08890ab906 ("x86/pvclock: add setter for pvclock_pvti_cpu0_va") Cc: stable@vger.kernel.org Reported-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-19x86: Convert x86_platform_ops to timespec64Arnd Bergmann
The x86 platform operations are fairly isolated, so it's easy to change them from using timespec to timespec64. It has been checked that all the users and callers are safe, and there is only one critical function that is broken beyond 2106: pvclock_read_wallclock() uses a 32-bit number of seconds since the epoch to communicate the boot time between host and guest in a virtual environment. This will work until 2106, but fixing this is outside the scope of this change, Add a comment at least. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Radim Krčmář <rkrcmar@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Juergen Gross <jgross@suse.com> Cc: jailhouse-dev@googlegroups.com Cc: Borislav Petkov <bp@suse.de> Cc: kvm@vger.kernel.org Cc: y2038@lists.linaro.org Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: xen-devel@lists.xenproject.org Cc: John Stultz <john.stultz@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Joao Martins <joao.m.martins@oracle.com> Link: https://lkml.kernel.org/r/20180427201435.3194219-1-arnd@arndb.de
2017-11-16Merge tag 'for-linus-4.15-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Xen features and fixes for v4.15-rc1 Apart from several small fixes it contains the following features: - a series by Joao Martins to add vdso support of the pv clock interface - a series by Juergen Gross to add support for Xen pv guests to be able to run on 5 level paging hosts - a series by Stefano Stabellini adding the Xen pvcalls frontend driver using a paravirtualized socket interface" * tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (34 commits) xen/pvcalls: fix potential endless loop in pvcalls-front.c xen/pvcalls: Add MODULE_LICENSE() MAINTAINERS: xen, kvm: track pvclock-abi.h changes x86/xen/time: setup vcpu 0 time info page x86/xen/time: set pvclock flags on xen_time_init() x86/pvclock: add setter for pvclock_pvti_cpu0_va ptp_kvm: probe for kvm guest availability xen/privcmd: remove unused variable pageidx xen: select grant interface version xen: update arch/x86/include/asm/xen/cpuid.h xen: add grant interface version dependent constants to gnttab_ops xen: limit grant v2 interface to the v1 functionality xen: re-introduce support for grant v2 interface xen: support priv-mapping in an HVM tools domain xen/pvcalls: remove redundant check for irq >= 0 xen/pvcalls: fix unsigned less than zero error check xen/time: Return -ENODEV from xen_get_wallclock() xen/pvcalls-front: mark expected switch fall-through xen: xenbus_probe_frontend: mark expected switch fall-throughs xen/time: do not decrease steal time after live migration on xen ...
2017-11-08x86/pvclock: add setter for pvclock_pvti_cpu0_vaJoao Martins
Right now there is only a pvclock_pvti_cpu0_va() which is defined on kvmclock since: commit dac16fba6fc5 ("x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap") The only user of this interface so far is kvm. This commit adds a setter function for the pvti page and moves pvclock_pvti_cpu0_va to pvclock, which is a more generic place to have it; and would allow other PV clocksources to use it, such as Xen. While moving pvclock_pvti_cpu0_va into pvclock, rename also this function to pvclock_get_pvti_cpu0_va (including its call sites) to be symmetric with the setter (pvclock_set_pvti_cpu0_va). Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-07X86/KVM: Clear encryption attribute when SEV is activeBrijesh Singh
The guest physical memory area holding the struct pvclock_wall_clock and struct pvclock_vcpu_time_info are shared with the hypervisor. It periodically updates the contents of the memory. When SEV is active, the encryption attributes from the shared memory pages must be cleared so that both hypervisor and guest can access the data. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20171020143059.3291-18-brijesh.singh@amd.com
2017-11-02kvm: Return -ENODEV from update_persistent_clockJason Gunthorpe
kvm does not support setting the RTC, so the correct result is -ENODEV. Returning -1 will cause sync_cmos_clock to keep trying to set the RTC every second. Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/clock.h> We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which will have to be picked up from other headers and .c files. Create a trivial placeholder <linux/sched/clock.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "4.11 is going to be a relatively large release for KVM, with a little over 200 commits and noteworthy changes for most architectures. ARM: - GICv3 save/restore - cache flushing fixes - working MSI injection for GICv3 ITS - physical timer emulation MIPS: - various improvements under the hood - support for SMP guests - a large rewrite of MMU emulation. KVM MIPS can now use MMU notifiers to support copy-on-write, KSM, idle page tracking, swapping, ballooning and everything else. KVM_CAP_READONLY_MEM is also supported, so that writes to some memory regions can be treated as MMIO. The new MMU also paves the way for hardware virtualization support. PPC: - support for POWER9 using the radix-tree MMU for host and guest - resizable hashed page table - bugfixes. s390: - expose more features to the guest - more SIMD extensions - instruction execution protection - ESOP2 x86: - improved hashing in the MMU - faster PageLRU tracking for Intel CPUs without EPT A/D bits - some refactoring of nested VMX entry/exit code, preparing for live migration support of nested hypervisors - expose yet another AVX512 CPUID bit - host-to-guest PTP support - refactoring of interrupt injection, with some optimizations thrown in and some duct tape removed. - remove lazy FPU handling - optimizations of user-mode exits - optimizations of vcpu_is_preempted() for KVM guests generic: - alternative signaling mechanism that doesn't pound on tsk->sighand->siglock" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (195 commits) x86/kvm: Provide optimized version of vcpu_is_preempted() for x86-64 x86/paravirt: Change vcp_is_preempted() arg type to long KVM: VMX: use correct vmcs_read/write for guest segment selector/base x86/kvm/vmx: Defer TR reload after VM exit x86/asm/64: Drop __cacheline_aligned from struct x86_hw_tss x86/kvm/vmx: Simplify segment_base() x86/kvm/vmx: Get rid of segment_base() on 64-bit kernels x86/kvm/vmx: Don't fetch the TSS base from the GDT x86/asm: Define the kernel TSS limit in a macro kvm: fix page struct leak in handle_vmon KVM: PPC: Book3S HV: Disable HPT resizing on POWER9 for now KVM: Return an error code only as a constant in kvm_get_dirty_log() KVM: Return an error code only as a constant in kvm_get_dirty_log_protect() KVM: Return directly after a failed copy_from_user() in kvm_vm_compat_ioctl() KVM: x86: remove code for lazy FPU handling KVM: race-free exit from KVM_RUN without POSIX signals KVM: PPC: Book3S HV: Turn "KVM guest htab" message into a debug message KVM: PPC: Book3S PR: Ratelimit copy data failure error messages KVM: Support vCPU-based gfn->hva cache KVM: use separate generations for each address space ...
2017-02-08kvmclock: export kvmclock clocksource and data pointersMarcelo Tosatti
To be used by KVM PTP driver. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-20sched/clock: Fix hotplug crashPeter Zijlstra
Mike reported that he could trigger the WARN_ON_ONCE() in set_sched_clock_stable() using hotplug. This exposed a fundamental problem with the interface, we should never mark the TSC stable if we ever find it to be unstable. Therefore set_sched_clock_stable() is a broken interface. The reason it existed is that not having it is a pain, it means all relevant architecture code needs to call clear_sched_clock_stable() where appropriate. Of the three architectures that select HAVE_UNSTABLE_SCHED_CLOCK ia64 and parisc are trivial in that they never called set_sched_clock_stable(), so add an unconditional call to clear_sched_clock_stable() to them. For x86 the story is a lot more involved, and what this patch tries to do is ensure we preserve the status quo. So even is Cyrix or Transmeta have usable TSC they never called set_sched_clock_stable() so they now get an explicit mark unstable. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 9881b024b7d7 ("sched/clock: Delay switching sched_clock to stable") Link: http://lkml.kernel.org/r/20170119133633.GB6536@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-09-15Merge branch 'linus' into x86/asm, to pick up recent fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-08x86, clock: Fix kvm guest tsc initializationPrarit Bhargava
When booting a kvm guest on AMD with the latest kernel the following messages are displayed in the boot log: tsc: Unable to calibrate against PIT tsc: HPET/PMTIMER calibration failed aa297292d708 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID") introduced a change to account for a difference in cpu and tsc frequencies for Intel SKL processors. Before this change the native tsc set x86_platform.calibrate_tsc to native_calibrate_tsc() which is a hardware calibration of the tsc, and in tsc_init() executed tsc_khz = x86_platform.calibrate_tsc(); cpu_khz = tsc_khz; The kvm code changed x86_platform.calibrate_tsc to kvm_get_tsc_khz() and executed the same tsc_init() function. This meant that KVM guests did not execute the native hardware calibration function. After aa297292d708, there are separate native calibrations for cpu_khz and tsc_khz. The code sets x86_platform.calibrate_tsc to native_calibrate_tsc() which is now an Intel specific calibration function, and x86_platform.calibrate_cpu to native_calibrate_cpu() which is the "old" native_calibrate_tsc() function (ie, the native hardware calibration function). tsc_init() now does cpu_khz = x86_platform.calibrate_cpu(); tsc_khz = x86_platform.calibrate_tsc(); if (tsc_khz == 0) tsc_khz = cpu_khz; else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz) cpu_khz = tsc_khz; The kvm code should not call the hardware initialization in native_calibrate_cpu(), as it isn't applicable for kvm and it didn't do that prior to aa297292d708. This patch resolves this issue by setting x86_platform.calibrate_cpu to kvm_get_tsc_khz(). v2: I had originally set x86_platform.calibrate_cpu to cpu_khz_from_cpuid(), however, pbonzini pointed out that the CPUID leaf in that function is not available in KVM. I have changed the function pointer to kvm_get_tsc_khz(). Fixes: aa297292d708 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Len Brown <len.brown@intel.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Christopher S. Hall" <christopher.s.hall@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-10x86: Apply more __ro_after_init and constKees Cook
Guided by grsecurity's analogous __read_only markings in arch/x86, this applies several uses of __ro_after_init to structures that are only updated during __init, and const for some structures that are never updated. Additionally extends __init markings to some functions that are only used during __init, and cleans up some missing C99 style static initializers. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Brown <david.brown@linaro.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: PaX Team <pageexec@freemail.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-hardening@lists.openwall.com Link: http://lkml.kernel.org/r/20160808232906.GA29731@www.outflux.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-24x86: Fix misspellings in commentsAdam Buchbinder
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: trivial@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-11x86/vdso: Remove pvclock fixmap machineryAndy Lutomirski
Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/4933029991103ae44672c82b97a20035f5c1fe4f.1449702533.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-11x86/vdso: Get pvclock data from the vvar VMA instead of the fixmapAndy Lutomirski
Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/9d37826fdc7e2d2809efe31d5345f97186859284.1449702533.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-01x86: kvmclock: abolish PVCLOCK_COUNTS_FROM_ZERORadim Krčmář
Newer KVM won't be exposing PVCLOCK_COUNTS_FROM_ZERO anymore. The purpose of that flags was to start counting system time from 0 when the KVM clock has been initialized. We can achieve the same by selecting one read as the initial point. A simple subtraction will work unless the KVM clock count overflows earlier (has smaller width) than scheduler's cycle count. We should be safe till x86_128. Because PVCLOCK_COUNTS_FROM_ZERO was enabled only on new hypervisors, setting sched clock as stable based on PVCLOCK_TSC_STABLE_BIT might regress on older ones. I presume we don't need to change kvm_clock_read instead of introducing kvm_sched_clock_read. A problem could arise in case sched_clock is expected to return the same value as get_cycles, but we should have merged those clocks in that case. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-10kexec: split kexec_load syscall from kexec core codeDave Young
There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-29x86: kvmclock: set scheduler clock stableLuiz Capitulino
If you try to enable NOHZ_FULL on a guest today, you'll get the following error when the guest tries to deactivate the scheduler tick: WARNING: CPU: 3 PID: 2182 at kernel/time/tick-sched.c:192 can_stop_full_tick+0xb9/0x290() NO_HZ FULL will not work with unstable sched clock CPU: 3 PID: 2182 Comm: kworker/3:1 Not tainted 4.0.0-10545-gb9bb6fb #204 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: events flush_to_ldisc ffffffff8162a0c7 ffff88011f583e88 ffffffff814e6ba0 0000000000000002 ffff88011f583ed8 ffff88011f583ec8 ffffffff8104d095 ffff88011f583eb8 0000000000000000 0000000000000003 0000000000000001 0000000000000001 Call Trace: <IRQ> [<ffffffff814e6ba0>] dump_stack+0x4f/0x7b [<ffffffff8104d095>] warn_slowpath_common+0x85/0xc0 [<ffffffff8104d146>] warn_slowpath_fmt+0x46/0x50 [<ffffffff810bd2a9>] can_stop_full_tick+0xb9/0x290 [<ffffffff810bd9ed>] tick_nohz_irq_exit+0x8d/0xb0 [<ffffffff810511c5>] irq_exit+0xc5/0x130 [<ffffffff814f180a>] smp_apic_timer_interrupt+0x4a/0x60 [<ffffffff814eff5e>] apic_timer_interrupt+0x6e/0x80 <EOI> [<ffffffff814ee5d1>] ? _raw_spin_unlock_irqrestore+0x31/0x60 [<ffffffff8108bbc8>] __wake_up+0x48/0x60 [<ffffffff8134836c>] n_tty_receive_buf_common+0x49c/0xba0 [<ffffffff8134a6bf>] ? tty_ldisc_ref+0x1f/0x70 [<ffffffff81348a84>] n_tty_receive_buf2+0x14/0x20 [<ffffffff8134b390>] flush_to_ldisc+0xe0/0x120 [<ffffffff81064d05>] process_one_work+0x1d5/0x540 [<ffffffff81064c81>] ? process_one_work+0x151/0x540 [<ffffffff81065191>] worker_thread+0x121/0x470 [<ffffffff81065070>] ? process_one_work+0x540/0x540 [<ffffffff8106b4df>] kthread+0xef/0x110 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 [<ffffffff814ef4f2>] ret_from_fork+0x42/0x70 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 ---[ end trace 06e3507544a38866 ]--- However, it turns out that kvmclock does provide a stable sched_clock callback. So, let the scheduler know this which in turn makes NOHZ_FULL work in the guest. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-19Revert "kvmclock: set scheduler clock stable"Paolo Bonzini
This reverts commit ff7bbb9c6ab6e6620429daeff39424bbde1a94b4. Sasha Levin is seeing odd jump in time values during boot of a KVM guest: [...] [ 0.000000] tsc: Detected 2260.998 MHz processor [3376355.247558] Calibrating delay loop (skipped) preset value.. [...] and bisected them to this commit. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07kvmclock: set scheduler clock stableLuiz Capitulino
If you try to enable NOHZ_FULL on a guest today, you'll get the following error when the guest tries to deactivate the scheduler tick: WARNING: CPU: 3 PID: 2182 at kernel/time/tick-sched.c:192 can_stop_full_tick+0xb9/0x290() NO_HZ FULL will not work with unstable sched clock CPU: 3 PID: 2182 Comm: kworker/3:1 Not tainted 4.0.0-10545-gb9bb6fb #204 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: events flush_to_ldisc ffffffff8162a0c7 ffff88011f583e88 ffffffff814e6ba0 0000000000000002 ffff88011f583ed8 ffff88011f583ec8 ffffffff8104d095 ffff88011f583eb8 0000000000000000 0000000000000003 0000000000000001 0000000000000001 Call Trace: <IRQ> [<ffffffff814e6ba0>] dump_stack+0x4f/0x7b [<ffffffff8104d095>] warn_slowpath_common+0x85/0xc0 [<ffffffff8104d146>] warn_slowpath_fmt+0x46/0x50 [<ffffffff810bd2a9>] can_stop_full_tick+0xb9/0x290 [<ffffffff810bd9ed>] tick_nohz_irq_exit+0x8d/0xb0 [<ffffffff810511c5>] irq_exit+0xc5/0x130 [<ffffffff814f180a>] smp_apic_timer_interrupt+0x4a/0x60 [<ffffffff814eff5e>] apic_timer_interrupt+0x6e/0x80 <EOI> [<ffffffff814ee5d1>] ? _raw_spin_unlock_irqrestore+0x31/0x60 [<ffffffff8108bbc8>] __wake_up+0x48/0x60 [<ffffffff8134836c>] n_tty_receive_buf_common+0x49c/0xba0 [<ffffffff8134a6bf>] ? tty_ldisc_ref+0x1f/0x70 [<ffffffff81348a84>] n_tty_receive_buf2+0x14/0x20 [<ffffffff8134b390>] flush_to_ldisc+0xe0/0x120 [<ffffffff81064d05>] process_one_work+0x1d5/0x540 [<ffffffff81064c81>] ? process_one_work+0x151/0x540 [<ffffffff81065191>] worker_thread+0x121/0x470 [<ffffffff81065070>] ? process_one_work+0x540/0x540 [<ffffffff8106b4df>] kthread+0xef/0x110 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 [<ffffffff814ef4f2>] ret_from_fork+0x42/0x70 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 ---[ end trace 06e3507544a38866 ]--- However, it turns out that kvmclock does provide a stable sched_clock callback. So, let the scheduler know this which in turn makes NOHZ_FULL work in the guest. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-10x86, kvm: Clear paravirt_enabled on KVM guests for espfix32's benefitAndy Lutomirski
paravirt_enabled has the following effects: - Disables the F00F bug workaround warning. There is no F00F bug workaround any more because Linux's standard IDT handling already works around the F00F bug, but the warning still exists. This is only cosmetic, and, in any event, there is no such thing as KVM on a CPU with the F00F bug. - Disables 32-bit APM BIOS detection. On a KVM paravirt system, there should be no APM BIOS anyway. - Disables tboot. I think that the tboot code should check the CPUID hypervisor bit directly if it matters. - paravirt_enabled disables espfix32. espfix32 should *not* be disabled under KVM paravirt. The last point is the purpose of this patch. It fixes a leak of the high 16 bits of the kernel stack address on 32-bit KVM paravirt guests. Fixes CVE-2014-8134. Cc: stable@vger.kernel.org Suggested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-03kvm: kvmclock: use get_cpu() and put_cpu()Tiejun Chen
We can use get_cpu() and put_cpu() to replace preempt_disable()/cpu = smp_processor_id() and preempt_enable() for slightly better code. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-22kvm: remove redundant registration of BSP's hv_clock areaFernando Luis Vázquez Cao
These days hv_clock allocation is memblock based (i.e. the percpu allocator is not involved), which means that the physical address of each of the per-cpu hv_clock areas is guaranteed to remain unchanged through all its lifetime and we do not need to update its location after CPU bring-up. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-06pvclock: detect watchdog reset at pvclock readMarcelo Tosatti
Implement reset of kernel watchdogs at pvclock read time. This avoids adding special code to every watchdog. This is possible for watchdogs which measure time based on sched_clock() or ktime_get() variants. Suggested by Don Zickus. Acked-by: Don Zickus <dzickus@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-07-14x86: delete __cpuinit usage from all x86 filesPaul Gortmaker
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-04Merge branch 'timers/posix-cpu-timers-for-tglx' ofThomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core Frederic sayed: "Most of these patches have been hanging around for several month now, in -mmotm for a significant chunk. They already missed a few releases." Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-19x86: kvmclock: zero initialize pvclock shared memory areaIgor Mammedov
kernel might hung in pvclock_clocksource_read() due to uninitialized memory might contain odd version value in following cycle: do { version = __pvclock_read_cycles(src, &ret, &flags); } while ((src->version & 1) || version != src->version); if secondary kvmclock is accessed before it's registered with kvm. Clear garbage in pvclock shared memory area right after it's allocated to avoid this issue. Ref: https://bugzilla.kernel.org/show_bug.cgi?id=59521 Signed-off-by: Igor Mammedov <imammedo@redhat.com> [See BZ for analysis. We may want a different fix for 3.11, but this is the safest for now - Paolo] Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-28x86: Increase precision of x86_platform.get/set_wallclock()David Vrabel
All the virtualized platforms (KVM, lguest and Xen) have persistent wallclocks that have more than one second of precision. read_persistent_wallclock() and update_persistent_wallclock() allow for nanosecond precision but their implementation on x86 with x86_platform.get/set_wallclock() only allows for one second precision. This means guests may see a wallclock time that is off by up to 1 second. Make set_wallclock() and get_wallclock() take a struct timespec parameter (which allows for nanosecond precision) so KVM and Xen guests may start with a more accurate wallclock time and a Xen dom0 can maintain a more accurate wallclock for guests. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-03-04Merge branch 'master' into queueMarcelo Tosatti
* master: (15791 commits) Linux 3.9-rc1 btrfs/raid56: Add missing #include <linux/vmalloc.h> fix compat_sys_rt_sigprocmask() SUNRPC: One line comment fix ext4: enable quotas before orphan cleanup ext4: don't allow quota mount options when quota feature enabled ext4: fix a warning from sparse check for ext4_dir_llseek ext4: convert number of blocks to clusters properly ext4: fix possible memory leak in ext4_remount() jbd2: fix ERR_PTR dereference in jbd2__journal_start metag: Provide dma_get_sgtable() metag: prom.h: remove declaration of metag_dt_memblock_reserve() metag: copy devicetree to non-init memory metag: cleanup metag_ksyms.c includes metag: move mm/init.c exports out of metag_ksyms.c metag: move usercopy.c exports out of metag_ksyms.c metag: move setup.c exports out of metag_ksyms.c metag: move kick.c exports out of metag_ksyms.c metag: move traps.c exports out of metag_ksyms.c metag: move irq enable out of irqflags.h on SMP ... Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Conflicts: arch/x86/kernel/kvmclock.c
2013-02-27x86: kvmclock: Do not setup kvmclock vsyscall in the absence of that clockJan Kiszka
This fixes boot lockups with "no-kvmclock", when the host is not exposing this particular feature (QEMU: -cpu ...,-kvmclock) or when the kvmclock initialization failed for whatever reason. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-02-24Merge tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Marcelo Tosatti: "KVM updates for the 3.9 merge window, including x86 real mode emulation fixes, stronger memory slot interface restrictions, mmu_lock spinlock hold time reduction, improved handling of large page faults on shadow, initial APICv HW acceleration support, s390 channel IO based virtio, amongst others" * tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits) Revert "KVM: MMU: lazily drop large spte" x86: pvclock kvm: align allocation size to page size KVM: nVMX: Remove redundant get_vmcs12 from nested_vmx_exit_handled_msr x86 emulator: fix parity calculation for AAD instruction KVM: PPC: BookE: Handle alignment interrupts booke: Added DBCR4 SPR number KVM: PPC: booke: Allow multiple exception types KVM: PPC: booke: use vcpu reference from thread_struct KVM: Remove user_alloc from struct kvm_memory_slot KVM: VMX: disable apicv by default KVM: s390: Fix handling of iscs. KVM: MMU: cleanup __direct_map KVM: MMU: remove pt_access in mmu_set_spte KVM: MMU: cleanup mapping-level KVM: MMU: lazily drop large spte KVM: VMX: cleanup vmx_set_cr0(). KVM: VMX: add missing exit names to VMX_EXIT_REASONS array KVM: VMX: disable SMEP feature when guest is in non-paging mode KVM: Remove duplicate text in api.txt Revert "KVM: MMU: split kvm_mmu_free_page" ...
generated by cgit (git 2.34.1) at 2024-05-25 08:29:15 +0000